J-32 Debug Probe: JTAG/SWD/ICSP Debugger/Programmer
J-32 Debug Probe: JTAG/SWD/ICSP Debugger/Programmer
J-32 Debug Probe: JTAG/SWD/ICSP Debugger/Programmer
Summary
The J-32 Debug Probe Debugger/Programmer provides affordable, fast and easy
debugging and programming for Microchip’s PIC32 and SAM MCU and SAM MPU
products. It is fully integrated into Microchip’s powerful MPLAB® X Integrated Develop-
ment Environment and easy-to-use Integrated Programming Environment. Connecting
existing hardware is simple as it keeps the Segger J-Link/J-Trace 20-pin debugging
connector. A compact form factor and two mounting holes permit the J-32 Debug
Probe to mount securely onto development or end-user equipment to support product
testing and calibration. J-32 Debug Probe has all the necessary performance and
features 32-bit MCU and MPU developers need.
The J-32 Debug Probe is fast and easy to use. This redesigned product features fast downloads from RAM to Flash memory.
Run-time data collection is available with bi-directional target communication and built-in virtual COM port functionality which
simplifies debugging and calibration. Future new product support will always be free with regular software updates. J-32 Debug
Probe is a cost-effective solution to debugging and programming Microchip’s 32-bit MCU and MPU products.
Advantages
Supports all Microchip 32-bit Products Fast and Flexible
• J-Link BASE compatible • Selectable JTAG speed up to 15 MHz
• GDB server support • Wide target voltage range: 1.2 to 5.0V
• Arm® 9x6, Cortex®-A, Cortex-M 32-bit and Thumb instruc- • Fully plug-and-play compatible
tion set support
• PIC32 MIPS In-Circuit Serial Programming (ICSP) Simple to Use
• MIPS32, MIPS16, microMIPS instruction set support • Fully integrated in MPLAB X IDE and IPE
• J-Link TCP/IP server included • No external power supply needed, fully powered from
micro USB 2.0 (high-speed)
Robust Debugging • Uses standard SAM 20-pin JTAG/SWD connector
• JTAG/SWD target voltage monitoring
• Auto-speed recognition Cost Effective
• All JTAG/SWD signals can be monitored • Same performance at a lower price than full-featured tools
• Adaptive clocking support
Ease of maintenance and feature upgrades
• New device support available at
www.segger.com/downloads/jlink
www.microchip.com
Products Supported
The J-32 Debug Probe supports PIC32 and SAM MCU and SAM MPU products and firmware is continually being updated to add
support for new devices. For the most current list of supported products, review the latest release notes located in MPLAB X IDE.
New product support is released through Segger’s website. Visit www.segger.com/downloads/jlink and download J-Link/J-32
software.
Ordering Information
The Microchip name and logo, the Microchip logo, AVR, dsPIC, MPLAB and PIC are registered trademarks and PICkit is a trademark of Microchip Technology Incorporated in the U.S.A. and other countries. Arm and Cortex
are registered trademarks of Arm Limited (or its subsidiaries) in the EU and other countries. All other trademarks mentioned herein are property of their respective companies.
© 2019, Microchip Technology Incorporated. All Rights Reserved. 10/19 DS00003162B
www.microchip.com