9 Sinopec Hydraulic Transmission Multifunctional Fluid 10W 30 UTTO三用 1

Product Data Sheet
Product Sinopec Hydraulic Transmission

Multifunctional Fluid 10W-30
Summary Product description
Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30 is an extra high-
performance universal tractor transmission oil (UTTO), formulated with high-
quality hydro-treated base oils and a multifunctional additive system. It is
designed to meet or exceed hydraulic and transmission fluid requirements,
and to reduce wet brake and power take-off (PTO) chatter. It ensures
excellent performance in agricultural and commercial tractors operating in a
wide range of environments and conditions, and is particularly useful in
equipment where a common lubrication system supplies oil for different
applications.
Available sizes
Also
available
in bulk
PAIL – 18L DRUM – 200L IBC – 1000L
Applications
Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30is suitable for use in:
 Transmission and hydraulic systems, wet brakes and final drives of tractors and other agricultural or forestry equipment
with common lubrication systems, where a UTTO type lubricant is required.
Features and benefits

 A multifunctional oil for hydraulic, transmission and wet brake systems, and suitable for high power tractors.
 Excellent shear stability ensures good viscosity retention even in conditions of high temperature and heavy load, and
prolongs the service life of hydraulic transmission systems.
 Outstanding fluidity and good low-temperature properties ensure smooth start up and operation even in cold weather.
 A special friction modifier ensures smooth action in wet brakes and power take-off clutches, minimises vibration,
chatter, stick–slip and squawk, and prolongs service life.
 Good anti-wear performance protects moving parts from wear and metal fatigue, ensures long equipment life, and
provides excellent protection against gear scuffing, pitting and wear in applications where an API GL-4 product is
required.
 Excellent thermal and oxidation stability minimise the formation of deposits that could lead to component wear, and
also ensure longer oil life.
 Excellent protection against rust and corrosion, increases the service life of system components.
 Good antifoaming properties ensure optimum oil film thickness is maintained and reduces oil leakage from the system.
 Good compatibility with most common seals and elastomer materials used in agricultural equipment, prolongs seal life
and reduces leakage.
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Page 1
Product Data Sheet
Typical data
Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30
Kinematic viscosity, ASTM D 445
cSt @ 40℃ 60.63
cSt @ 100℃ 10.01
Brookfield viscosity, ASTM D 2983
cP @ -35℃ 22826
Pour point, ℃, ASTM D 97 -46
Flash point (COC), ℃, ASTM D 92 240
Density @ 15℃, kg/l, ASTM D 4052 0.863

These data are given as an indication of typical values and not as exact specifications.
Industry and OEM specifications

Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30meets the performance requirements of the
following industry specifications:
API Service Classification Automotive Gear Lubricant: GL-4
Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30meets the performance requirements of the
following OEM specifications:
Allison C-4 (agricultural applications only)
CNH MAT 3525, MAT3540, MAT3541
Caterpillar TO-2
John Deere JDM J20C
Kubota UDT
AGCO CMS1145
Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30holds the following formal OEM approvals:
ZF TE-ML-03E, TE-ML-05F, TE-ML-06K, TE-ML-17E, TE-ML-21F

Volvo WB101
Accuracy of information
Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The
information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures
and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and
OEM specifications referred to on this data sheet.
Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best
practice is available from your local distributor.
Product and environmental safety

This product should not cause any health problems when used in the applications suggested and when the guidance provided
in the Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs
are available from your local distributor. Do not use the product in applications other than those suggested.
As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be
sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations.
The SINOPEC trademark is registered and protected.
Issued: March 2017

© Sinopec 2017 Sinopec Hydraulic Transmission Multifunctional Fluid 10W-30
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Page 2

9 Sinopec Hydraulic Transmission Multifunctional Fluid 10W 30 UTTO三用 1

Uploaded by

Copyright:

Available Formats

9 Sinopec Hydraulic Transmission Multifunctional Fluid 10W 30 UTTO三用 1

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9 Sinopec Hydraulic Transmission Multifunctional Fluid 10W 30 UTTO三用 1

Uploaded by

Copyright:

Available Formats

Product Data Sheet

Product Sinopec Hydraulic Transmission

PAIL – 18L DRUM – 200L IBC – 1000L

Features and benefits

Kinematic viscosity, ASTM D 445

cSt @ 40℃ 60.63

cSt @ 100℃ 10.01

Brookfield viscosity, ASTM D 2983

Pour point, ℃, ASTM D 97 -46

Flash point (COC), ℃, ASTM D 92 240

Density @ 15℃, kg/l, ASTM D 4052 0.863

Industry and OEM specifications

ZF TE-ML-03E, TE-ML-05F, TE-ML-06K, TE-ML-17E, TE-ML-21F

Product and environmental safety

Issued: March 2017

You might also like