Training Activity Matrix SMAW NC I-CORE

KEITECH Educational Foundation Inc.
KEITECH Leyte Campus

Brgys. Rizal and Hiluctogan,
Kananga, Leyte
Email add: [email protected]
Contact # 09177247686
TRAINING ACTIVITY
MATRIX
FOR SMAW NC I
CORE COMPETENCIES
1
KEITECH Educational Foundation Inc.
KEITECH Leyte Campus
Brgys. Rizal and Hiluctogan,
Kananga, Leyte
Training Activity Matrix -Core Competencies SMAW NC I
Venue Remarks
Materials, Tools SMAW NCII Date &
Training Activity Trainee
and Equipment WORKSHOP Time
&
CLASSROOM
Prayer 1:00
Unfreezing Activities All trainees PM to
5S Implementation 1:30
Checking of attendance PM
Rejoinder/Motivation
Daily toolbox meeting
Announce of the day’s activities
 PPE Welding 1:30- All trainees should be
Perform Padding Weld All Trainees  Scrapt Workshop 4:00 able to:
materials PM  Perform padding
 1 pc 3”x5” weld using
Flat Bar SMAW process in
 E6011 all positions
Housekeeping All Trainees  Cleaning Welding 4:00-

materials workshop/ 4:30PM
Classroom/
tool
room/stock
2
room
DAY 2- CORE COMPETENCIES
Prayer All Trainees Welding 8:00-

Unfreezing Activities Classroom 8:30AM
Checking of Attendance
Recap Assigned Group
Announce of the day’s activities All Trainees
All Trainees  PPE Welding 8:30- All trainees should be
 Learning Classroo/ 10:00 able to:
Materials Workshop AM  Perform flat fillet
 Laptop & weld in
Perform Flat Fillet (1F) Weld accordance with
Projector
 Video company or
presentation industry
 Power point requirement and
 8”x3”x12mm safety procedure.
plate (carbon  Perform visual
steel/mild steel) check for defects
 E6011 and repair weld
 Chipping as required and
hammer acceptable in
 Steel brush accordance with
applicable codes
 Angle grinder
and standards.
Break Time All Trainees 10:00-
10:15
AM
3
All Trainees 10:15-
Cont’. Performing Flat Fillet 11:45
(1F) Weld AM

Materials Classroom 12:00
/workshop NN

Unfreezing Activities Classroom 1:20
PM
Recap
All Trainees  8”x3”x12mm Welding 1:20-

Cont’. Performing Flat Fillet plate (carbon Workshop 3:00
(1F) Weld steel/mild PM
steel)
 E6011
 Complete PPE
 Steel brush
 Angle grinder
Breaktime All Trainees 3:00-

3:15
PM
All Trainees 3:15-
Cont’. Performing Flat Fillet 4:15
(1F) Weld PM

Materials workshop/ 4:30
Welding PM
classroom
4

Unfreezing Activities classroom 8:30AM
Checking of Attendance
Recap Assigned group
All Trainees Welding 8:30-
Cont’. Performing Flat Fillet workshop 10:00
Weld AM
Break Time All Trainees Welding 10:00-

workshop/ 10:15
classroom AM
All Trainees Welding 10:15-
Cont’. Performing Flat Fillet workshop 11:45
Weld AM

classroom NN
Prayer Welding 1:00-

Unfreezing Activities All Trainees classroom 1:20
PM
Recap
1:20-
All Trainees  PPE 3:00 All trainees should be
 Learning PM able to:
5
Materials  Perform
 Laptop & horizontal fillet
Projector weld in
 Video accordance with
presentation WPS and/or
 Power point client
Perform Horizontal Fillet (2F)
specifications.
Weld
 Perform the given
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
Welding 3:00-
Breaktime All trainees classroom 3:15
PM
All trainees  8”x3”x12mm Welding 3:15-

Cont’. Performing Horizontal plate (carbon workshop 4:15
Fillet (2F) Weld steel/mild steel) PM
6
 E6011
 Complete PPE
 Steel brush
 Angle grinder
Housekeeping All trainees  Cleaning Welding 4:15-

materials classroom/ 4:30
workshop PM
Prayer All trainees Welding 8:00-

Unfreezing activities classroom 8:20
Checking og attendance AM
Recap

plate (carbon workshop 10:00
Cont’. Performing Horizontal steel/mild AM
Fillet (2F) Weld steel)
 Electrode
 Complete PPE
 Steel brush
Break time All trainees 10:00-

10:15
AM
7
All trainees 10:15-
Cont’. Performing Horizontal 11:45
Fillet (2F) Weld AM
Housekeeping All trainees  Cleaning 11:45-

materials 12:00
NN
Motivation classroom 1:20
Recap PM
All trainees Welding 1:20-
Cont’. Performing Horizontal workshop 3:00
Fillet (2F) Weld PM
Breaktime All trainees Welding 3:00-

Classroom 3:15
PM

Fillet (2F) Weld PM

materials workshop/ 4:30
classroom PM

Prayer All trainess Welding 8:00-
8
Checking of attendance AM
Motivation
All trainess Welding 8:15-
Fillet (2F) Weld AM
Break time All trainees Welding 10:00-

classroom 10:15
AM
Fillet (2F) Weld AM

classroom NN

Cheking of Attendance PM
Recap
All trainees  PPE Welding 1:20- All trainees should be
Perform Vertical Fillet (3F)  Learning classroom 3:00 able to:
Weld Materials PM  Perform vertical
 Laptop & fillet weld in
Projector accordance with
 Video WPS and/or
presentation client
9
 Power point specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.

classroom 3:15
PM
Cont’. Performing Vertical workshop 4:15
Fillet (3F) Weld PM

workshop PM

10
Cont’. Performing Vertical plate (carbon workshop 10:00
Fillet (3F) Weld steel/mild AM
steel)
 Electrode
 Complete PPE
 Steel brush
 Angle grider

classroom 10:15
AM
Fillet (3F) Weld AM
classroom NN
Prayer All trainees Welding
Motivation classroom 1:00-
Recap 1:20
PM
Fillet (3F) Weld PM

classroom 3:15
11
PM
Fillet (3F) Weld PM

classroom PM

Checking of Att endance AM
Cont’. Performing Vertical All trainees Welding 8:20:11
Fillet (3F) Weld workshop 10:00
AM
classroom 10:15
AM
Fillet (3F) Weld AM
Housekeeping All trainees  Clening Welding 11:45

Classroom NN
Recap PM
Perform Overhead Fillet (4F)  Learning classroom 3:00PM able to:
12
Weld Materials  Perform overhead
 Laptop & fillet weld in
Projector accordance with
 Video WPS and/or
presentation client
 Power point specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 3:15
PM
Cont’. Performing Overhead workshop 4:15
Fillet (4F) Weld PM

materials classroom 4:30
PM
13
Recap
Cont’. Performing Overhead plate (carbon workshop 10:00
Fillet (4F) Weld steel/mild AM
steel)
 Electrode
 Complete PPE
 Steel brush

classroom 10:15
AM
Fillet (4F) Weld AM

classroom NN

Motivation Classroom 1:20
Recap PM
PM
14
Fillet (4F) Weld

Classroom 3:15PM
Fillet (4F) Weld PM

classroom PM

Unfreezing activities Classroom 8:20
Fillet (4F) Weld AM

Classroom 10:15
AM
General Housekeeping All trainees  Cleaning Welding 10:15-
classroom NN
15
Motivation Classroom 1:20
Fillet (4F) Weld PM

classroom 3:15
PM
Fillet (4F) Weld PM
Housekeeping All trainees Welding 4:15-

workshop/ 4:30
classroom PM

Unfreezing activities Classroom 8:20
Announce for the day’s activities
 Learning Classroom 10:00 able to:
Materials AM  Perform flat
Perform Flat (1G) Weld  Laptop & position groove
Projector weld in
16
specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 10:15
AM
Cont’. Performing Flat (1G) unlimited workshop 11:45
Weld plate (carbon AM
steel/mild
steel)
 Electrode
 Complete PPE
 Steel brush
17
classroom NN
Recap PM
Cont’. Performing Flat (1G) workshop 3:00
Weld PM

classroom 3:15
PM
Weld PM

classroom PM

AM
Checking of attendance
Weld AM
18
classroom 10:15
AM
Weld AM

classroom NN
PM
 Learning classroom 3:00 able to:
Materials PM  Perform
 Laptop & horizontal
Projector position groove
 Video weld in
Perform Horizontal (2G) Weld presentation accordance with
 Power point WPS and/or
client
specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
19
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.

Classroom 3:15
PM
Cont’. Performing Horizontal Workshop 4:15
(2G) Weld PM
Housekeeping All trainees  Cleaning Welding

materials workshop/ 4:15-
classroom 4:30
PM

All trainees  6”x3”x12mm 8:20-
unlimited Welding 10:00
plate (carbon workshop AM
Cont’. Performing Horizontal steel)
(2G) Weld  Electrode
20
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer

classroom 10:15
AM
(2G) Weld AM

classroom NN
Recap PM
(2G) Weld PM

classroom 3:15
PM
(2G) Weld PM

classroom PM
21
(2G) Weld AM

classroom 10:15
AM
(2G) Weld AM

classroom AM

Checking of attendance classroom 1:20
Daily toolbox meeting PM
Motivation

22
(2G) Weld PM

classroom 3:15
PM
(2G) Weld PM

classroom PM

Daily toolbox meeting AM
Motivation
Perform Vertical (3G) Weld  Learning classroom 10:00 able to:
Materials AM  Perform vertical
 Laptop & position groove
Projector weld in
specifications.
task in
accordance with
23
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.

classroom 10:15
AM
Cont’. Performing Vertical unlimited workshop 11:45
(3G) Weld plate (carbon AM
steel)
 Electrode
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer

workshop/ 12:00
24
Materials Welding NN
classroom
Prayer All trainees Welding

Motivation classroom 1:00-
Recap 1:20
PM
(3G) Weld PM

Classroom 3:15
PM
(3G) Weld PM

Welding PM
classroom

Daily toolbox meeting 
(3G) Weld AM
25
classroom 10:15
AM
(3G) Weld AM

welding NN
classroom
PM
(3G) Weld PM

classroom 3:15
PM
Cont’. Performing Vertical All trainees Welding 3:15-
(3G) Weld workshop 4:15
PM

Welding PM
classroom
26
(3G) Weld AM

classroom 10:15
AM
(3G) Weld AM

welding NN
classroom

PM
Perform Overhead (4G) Weld  Learning classroom 3:00 able to:
Materials PM  Perform
 Laptop & overhead position
Projector groove weld in
27
specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 3:15
PM
Cont’. Performing Overhead classroom 4:15
(4G) Weld PM
welding PM
classroom
28
Prayer Alltrainees Welding 8:00-
Cont’. Performing Overhead unlimited workshop 10:00
(4G) Weld plate (carbon AM
steel)
 Electrode
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
classroom 10:15
AM
(4G) Weld AM

welding NN
classroom

29
Announcement for the day’s
activity
(4G) Weld PM

classroom 3:15
PM
(4G) Weld PM

welding PM
classroom

(4G) Weld AM

classroom 10:15
AM
30
(4G) Weld AM

welding NN
classroom

PM

 Learning classroom 3:00 able to:
Materials PM  Perform diagonal
Perform diagonal plate; tilt  Laptop & plate ;tilt (45º)
(45º) angle – Custumized Projector angle position
 Video groove weld in
presentation accordance with
 Power point WPS and/or
client
specifications.
task in
accordance with
company or
industry
requirement and
31
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 3:15
PM
Con’t. Performing diagonal unlimited worshop 4:15
plate tilt (45º)angle – plate (carbon PM
Custumized steel)
 Electrode
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
classroom PM

32
Con’t. Performing diagonal workshop 10:00
plate tilt (45º)angle – AM
Custumized

classroom 10:15
AM
plate tilt (45º)angle – AM
Custumized

classroom NN
PM
plate tilt (45º)angle – PM
Custumized

classroom 3:15
PM
plate tilt (45º)angle – PM
Custumized
33
classroom PM

Recap
Perform semi overhead; tilt All trainees  PPE Welding 8:20- All trainees should be
(45º) angle plate – standard  Learning classroom 10:00 able to:
Materials AM  Perform semi
 Laptop & overhead
Projector plate ;tilt (45º)
 Video angle position
presentation groove weld in
 Power point accordance with
WPS and/or
client
specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
34
acceptable in
accordance with
applicable codes
and standards.
classroom 10:15
AM
Con’t. Performing semi All trainees  6”x3”x12mm Welding 10:15-
overhead; tilt (45º) angle unlimited workshop 11:45
plate – standard plate (carbon AM
steel)
 Electrode
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
classroom NN
PM
Con’t. Performing semi workshop 3:00
overhead; tilt (45º) angle PM
plate – standard

classroom 3:15
PM
35
overhead; tilt (45º) angle PM
plate – standard

classroom PM

Motivation
overhead; tilt (45º) angle AM
plate – standard
classroom 10:15
AM
General Housekeeping All trainees  Cleaning Welding 10:15-
classroom/ NN
Toolroom/
stockroom

36
Announce on the day’s activities
Weld carbon steel pipes in  Learning classroom 3:00 able to:
horizontal position (2G) Materials PM  Weld carbon steel
–Standard  Laptop & pipes in
Projector horizontal (2G )
 Video position groove
presentation weld in
WPS and/or
client
specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 3:15
PM
 7”x5/8”mm Welding 3:15-
Con’t. Welding carbon steel workshop 4:15
37
pipes in horizontal position pipe (carbon PM
(2G) steel)
–Standard  Electrode
E6011/E701
8
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
welding PM
classroom

All trainees  7”x5/8”mm Welding 8:20-
Con’t. Welding carbon steel pipe (carbon workshop 10:00
pipes in horizontal position steel) AM
(2G)  Electrode
–Standard E6011/E701
38
8
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
classroom 10:15
AM
pipes in horizontal position AM
(2G)
–Standard
Housekeeping All trainees Welding 11:45-

workshop/ 12:00
welding NN
classroom
Recap PM
pipes in horizontal position PM
(2G)
–Standard

classroom 3:15
PM
workshop 4:15
39
Con’t. Welding carbon steel PM
pipes in horizontal position
(2G)
–Standard
welding PM
classroom


fixed pipe horizontal position Materials AM  Weld carbon steel
(5G)  Laptop & pipes in fixed
–Standard Projector pipe horizontal
 Video (5G ) position
presentation groove weld in
WPS and/or
client
specifications.
task in
accordance with
company or
40
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 10:15
AM
pipes in fixed pipe horizontal steel) AM
position (5G)  Electrode
–Standard E6011/E701
8
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
classroom NN
PM
41
Con’t. Welding carbon steel workshop 3:00PM
pipes in fixed pipe horizontal
position (5G)
–Standard

classroom 3:15PM
position (5G)
–Standard

welding PM
classroom

Checking of attendance classroom 8:30AM
Recap
pipes in fixed pipe horizontal AM
position (5G)
–Standard

classroom 10:15
42
AM
position (5G)
–Standard

MAterials classroom/ 12:00
welding NN
workshop
Unfreezing activities classroom 1:20PM
position (5G)
–Standard

classroom 3:15PM
position (5G)
–Standard

welding PM
workshop
43
Prayer All traineses Welding 8:00-
Unfreezing activities classroom 8:30AM
Checking of attendance
Motivation
position (5G)
–Standard

classroom 10:15
AM
position (5G)
–Standard

welding NN
workshop

All trainees  Welding 1:20-
44
pipes in fixed pipe horizontal PM
position (5G)
–Standard

classroom 3:15
PM
position (5G)
–Standard

welding PM
workshop

position (5G)
–Standard
45
classroom 10:15
AM

position (5G)
–Standard

welding NN
workshop
PM
position (5G)
–Standard

classroom 3:15
PM
position (5G)
46
–Standard
classroom PM
Announce for the day’s activities
fixed pipe, inclined at (45º) Materials AM  Weld carbon steel
position (6G)  Laptop & pipes in fixed
Projector pipe, inclined at
–Standard  Video (45º) (6G )
presentation position groove
 Power point weld in
accordance with
WPS and/or
client
specifications.
task in
accordance with
company or
industry
requirement and
safety procedure.
 Perform visual
check for defects
and repair weld
47
as required and
acceptable in
accordance with
applicable codes
and standards.
classroom 10:15
AM
pipes in fixed pipe, inclined steel) AM
at (45º) position (6G)  Electrode
E6011/E701
–Standard 8
 Complete PPE
 Steel brush
 Angle grinder
 Chipping
hammer
workshop NN
PM
pipes in fixed pipe, inclined PM
at (45º) position (6G)
–Standard
48
classroom 3:15
PM
–Standard

welding PM
workshop

Motivation
pipes in fixed pipe, inclined AM
–Standard

classroom 10:15
AM
49
pipes in fixed pipe, inclined AM
–Standard

welding NN
workshop

PM
–Standard

classroom 3:15
PM
–Standard
50
welding PM
workshop

Motivation
General housekeeping All trainees  Cleaning Welding 8:30-
welding NN
workshop



DAY 35-40 CORE COMPETENCIES

All trainees  Written Exam Welding All trainees should be
 Oral classroom/ able to passed the
Institutional Assessment Questioner welding institutional assessment
workshop conducted by the trainer.
 Materials
needed for
practical
demonstratio
n
DAY 40-45 CORE COMPETENCIES
51
All trainees  Materials Welding All trainees should be
National Assessment needed for classroom/ able to passed the
the practical welding National Assessment
demonstratio workshop conducted by TESDA.
n
Prepared by: Checked by: Approved by:
EUGENIO M. MATES JR. VIRGILIO I. LABICANE ERWIN B. MAGALLANES

GTAW/SMAW NC II/Trainer Head, Instructional Services Administrator
52

Training Activity Matrix SMAW NC I-CORE

Uploaded by

Copyright:

Available Formats

Training Activity Matrix SMAW NC I-CORE

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Training Activity Matrix SMAW NC I-CORE

Uploaded by

Copyright:

Available Formats

KEITECH Educational Foundation Inc.

KEITECH Leyte Campus

Housekeeping All Trainees  Cleaning Welding 4:00-

DAY 2- CORE COMPETENCIES

Prayer All Trainees Welding 8:00-

Housekeeping All Trainees  Cleaning Welding 11:45-

Prayer All Trainees Welding 1:00-

All Trainees  8”x3”x12mm Welding 1:20-

Breaktime All Trainees 3:00-

Housekeeping All Trainees  Cleaning Welding 4:15-

Prayer All Trainees Welding 8:00-

Break Time All Trainees Welding 10:00-

Housekeeping All Trainees  Cleaning Welding 11:45-

Prayer Welding 1:00-

All trainees  8”x3”x12mm Welding 3:15-

Housekeeping All trainees  Cleaning Welding 4:15-

DAY 4- CORE COMPETENCIES

Prayer All trainees Welding 8:00-

All trainees  8”x3”x12mm Welding 8:20-

Break time All trainees 10:00-

Housekeeping All trainees  Cleaning 11:45-

Breaktime All trainees Welding 3:00-

All trainees Welding 3:15-

Housekeeping All trainees  Cleaning Welding 4:45-

DAY 5- CORE COMPETENCIES

Break time All trainees Welding 10:00-

Housekeeping All trainees  Cleaning Welding 11:45-

DAY 6- CORE COMPETENCIES

Breaktime All trainees Welding 3:00-

Housekeeping All trainees  Cleaning Welding 4:15-

DAY 7- CORE COMPETENCIES

Break time All trainees Welding 10:00-

Breaktime All trainees Welding 3:00-

Housekeeping All trainees  Cleaning Welding 4:15-

DAY 8- CORE COMPETENCIES

Housekeeping All trainees  Clening Welding 11:45

Housekeeping All trainees  Cleaning Welding 4:15-

Break time All trainees Welding 10:00-

Housekeeping All trainees  Cleaning Welding 11:45-

Prayer All trainees Welding 1:00-

Breaktime All trainees Welding 3:00-

Housekeeping All trainees  Cleaning Welding 4:15-

DAY 10- CORE COMPETENCIES

Break time All trainees Welding 10:00-

DAY 11- CORE COMPETENCIES

Breaktime All trainees Welding 3:00-

Housekeeping All trainees Welding 4:15-

DAY 12- CORE COMPETENCIES

Housekeeping All trainees  Cleaning Welding 11:45-

Breaktime All trainees Welding 3:00-

Housekeeping All trainees  Cleaning Welding 4:15-

DAY 13- CORE COMPETENCIES

Housekeeping All trainees  Cleaning Welding 11:45-

Breaktime All trainees Welding 3:00-

Housekeeping All trainees  Cleaning Welding

DAY 14- CORE COMPETENCIES

Break time All trainees Welding 10:00-

Housekeeping All trainees  Cleaning Welding 11:45-

Breaktime All trainees Welding 3:00-

Housekeeping All trainees  Cleaning Welding 4:15-