LV Motor EQP ODP Premium Brochure Rev 131220

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Toshiba’s EQPIII® Premium motor is the

cornerstone of the heavy duty product offering.


This open drip-proof series is built to withstand tough
general conditions and designed to meet the industry’s
ever-increasing need for improved energy conservation
and product reliability in indoor applications. This motor
meets the NEMA energy efficiency requirements as listed
in NEMA MG1 Table 12-12 and offers some of the highest
efficiency and torque ratings while producing some of
the lowest vibration ratings in the industry—leading to a
longer life and greater reliability.

• NEMA Premium® Efficiency (1 through 500 HP)


• Inverter Duty-Rated
• Addresses Global Motor Specifications Including
Horsepower ¾ to 700 HP
CE, NEMA, & IEC
Speed (60 Hz) 3600, 1800, 1200, or 900 RPM
• Low Temperature Rise
Voltage (60 Hz) 230/460, 460, or 575 V
• Multi-Mount on 140 through 250 Frames
Enclosure Open Drip Proof
Frame Size 143T through 509U
Protection IP22
Construction Cast Iron Frame & Brackets
Class F, Exceeds NEMA MG1 Part 31
Insulation
(Inverter Duty)
Typically 0.08 Inches/Second or Less
Vibration
(Unfiltered)
Environment Heavy Duty

EQPIII® ODP
LOW VOLTAGE MOTOR
HEAVY DUTY
EQPIII® ODP
BUILT FOR HEAVY DUTY
APPLICATIONS
Nameplate
• 304 Stainless Steel
• Connection Diagram Included
• Etched Lettering

Construction
• ASTM Grade 25 Cast Iron Frame & Bearing Brackets
• Gasket Provided Between Motor Frame & Conduit Box
• Typical Unfiltered Vibration Levels of 0.08 Inches/Second or Less

Conduit Box
• Grounding Provisions
• Terminal Lugs on 280 Frame & Above
• Steel Construction
• Rotatable (90°C)

Bearing System
• Oversized 300 Series Load-Side Bearings on 210 Frames & Above
• Low Temperature-Rise for Extended Life
• L-10 Bearing Life of 150,000 Hours Direct-Coupled
• L-10 Bearing Life of 40,000 Hours Belted

Insulation System
• System’s Major Components Made from Class H Materials
• Low Loss Electrical Steel with 1000°F Burnout Capability
• Exceeds NEMA MG1 Part 31 Requirements (Inverter Duty)
• Voltage Withstand Capability of 2000 V in 0.1 µs
• Large Thermal Margins for Extended Life & Reliability
• Phase Paper & Coil Bracing on Both Ends for All Ratings

Testing
• 100% No-Load Commercial Test on All Motors
• On 440 Frame & Above:
» Commercial Test & Vibration Test
» 100% of Bearings are Ball-Pass Frequency Tested

www.toshiba.com/motors
© 2013 Toshiba International Corporation • Industrial Division • 13131 West Little York Road • Houston, Texas 77041 USA • Tel +713-466-0277 US 1-800-231-1412 • Rev. 131220

You might also like