_ i 1 YY | MAGE X-RAY SENSOR MANUAL DX01 xDigital Intraoral X-Ray Imaging System DxX01 User's Manual Document Version: AO Document ID: 111-201-02 Release Date: 2020-04-08 Before operating, please read this user manual and pay attention to all safety precautions. Please ensure that this user's manual is properly maintained so that it can be accessed at any time (reserve). Please use it correctly on the basis of full understanding of the content.Digital Intraoral X-Ray Imaging System DX01 To Customers A Ray, we sive tot only make the world-class product tha deliver the bert vlue potsbieo oar carte JN “iets ul sls offerte highest quality ofservice and customer ear, Pleat keine tread through this scr Fide nnate touting the wedoc elon We pe peu cncs he sapenence wis key Dt Caring for your environment ris syol nds tht his products notto be disposed of wih your sien or commercial a Recycling X-Ray Equipment Mende no iencsc oy product with your residential or sommetcil waste Improperhanding ofthis ype owas could ave sacpatveiapecvon bea audon te envvomear Sone utes rvegroas suhes ne Eervpaea Unies, haveset ap aysems callestanderyclelecea or slostonic wane tems. Contato lol autor for ianwstensboulpiasiens subhatedinvourseion, ienleconsouicne ancaotacalathe thane ead eno preniayennteeun aloha Disclaimer IS Ray shal ot beable the purchaserof this prodct or third pats for any damage se, inary incu ged yparchacror third pac ra rerlo fe, cartuguake any seein misuse abun othe produt 2. Xikey lage habe any damage lane. isan antag ion anauthonsad ecstene rakes Ares tu thiprodueton fear ones comply wtttay'caperatingandeaitennesareton 4, Xekay sallnotb Hale for any damage or lene araing fom the dea any option or onmumable product Nhs hmthoce dtieatedor Opa Rey Petter 4, Ifo egsidng sesiteitn competion sed appearance ofthis producti object change without Copyright “rightseserved No part of this publication may be reproduced in any form or by any means without the written permission of X-Ray. The information contained herein is designed only for use with X-Ray DXOLTo Customers Symbols and Conventions The following symbols and conventions are used throughout the user guide. Twi > This symbol is used to identify conditions under which improper use IZ iN ? of the product may cause death or serious personal injury. ZX caution This notice is used to identify conditions under which improper use of tu the product may cause minor personal injury. CAUTION This notice is used to identify conditions under which improper use of the product may cause property damage. @ This is used to indicate an action that must be performed Qimcn This is used to indicate important operations and restrictions, OnIx=z= This is used to indicate operations for reference and complementary information.Digital Intraoral X-Ray Imaging System DX01 Labels and markings on the equipment The contents of the labels and markings on X-Ray DX01 product are indicated below: SN This symbol is used to identify the manufacture's series number which is after, below or adjacent to the symbol. This symbol is used to indicate consultation of the user guide for general information. © Safety Signs: please refer tothe user guide for safety instructions Use-by date = R TypeB Ipos IP Grade of the sensorDigital Intraoral X-Ray Imaging System DX01 TO CUSTOMERS... Contents. 1. Safety Information. 1.1 Safety precautions 1.2 Notes for Using. 1.3 Storage and Operation Environment. 2, General Introduction, 2.1 Application scope. 10 mponent of the imaging system, 10 2.3 Operation Environment, 13 3. Hardware Installation. 3.1 Sensor Installation 15 3.2 Software Fuction 16 3.3 Working Conditions AT 3.4 Basic Inspection Operation 18 3.5 Log In To The Console Software. 18 3.6 Add Study. 19 3.7 Edit Study. 20 3.8 Scarch Study. 21 3.9 Image Acquisition. 23 3.10 Image Editing. 24 3.11 Report. 27 3.12 System Management, 28 3.13 Option. 29 3.14 Optimization Mode. 31 3.15 Change Password, 32 3.16 Minimize Software, 33 3.17 Close The Software. 33Digital Intraoral X-Ray Imaging System DX1 1.Safety Information 1.1 Safety precautions. 1.2 Notes for USing...sesssesssessesssentsnennenseninannnneene 1.3 Storage and Operation Environment.1. Safety Information 1.1 Safety precautions Follow these safeguards and properly use the equipment to prevent injury and damage to any equipment/data. Installation and| environment Jofuse Prohibes Do not use orstore the equipment near lammable ch Ifehemicals are spilled or evaporate, it may result clectrie parts inside the equipment. Do not connect the equipment with anything other than specified Doing so may result in personal injury or produet damage Do not install or use in the Following environment, or it may eause Fire, personal injury or product damag Facilities near water sources Indirect sunlight Close o air condition or ventilation Dusty toa heat source asa heater Ing salty or acidic environment igh temperature and high humidity Tee or condensation Inthe environment easy to vibrate ‘Ona slope or inan unstable area Ensure thatthe eable is not knatted or wound ducing use Oritmay cause the equipment damage or persone injury jcals such as alcohol, thinner, benzene, et or product damage through contact with Never disassemble or modify the equipment, No modification of this equipment is allowed, Handling Follow the below instructions to prevent damage to the sensor and cable Do not wist, bend, pull and pinch the eable strongly Do not strike of drop the equipmen Do not soueh the pin of the usb connector wrabied! Do not put the equipment and pointed objects together lWhen a probtem Please unplug the usb connector when a problem happened and contact the supplier or local dealer: secure When there is smoke, an odd smell or abnormal sound. When liquid has been spilled into the equipment ora metal object has entered through an opening When the equipment has been dropped and damaged. 6Digital Intraoral X-Ray Imaging System DX01 ick > Tyga protection ven Tn told becovered with yen bag when you ply the sexsr os pain [protection Note that a hygiene bag whose is single use only. The bag should be renewed for each patient to prevent any edcleening possible transmission of infective ageats Use a hygiene bag whose size ft the size ofthe sensor Cleaning Pay special attention to avoid the risk of damage when cleaning the sensor The sensor should be cleaned frequently. Wipe the sensor and the cable with oft cloth which is damped with 70% isopropyl alcohol when the usb connector isnot connected. Do not apply any liquid or disinfectant to the product except 70% isopropyl alcohol Do not immerse the sensor in disinfectants or any other chemicals Do not sterilize the product by heating, eutoclaving or UV. No valuable clinical obtained after exposure due to operational The sensor performance was abnormal, no valuable clinical images obtained after exposure due to the interference of the equipment which isnot conforming to YY0S0S-2012 standard, as0ns of failure ofthe device The sensor is used in conjunction with the registered x-ray machine. Installation and software operation ofthis product, please refer to the product user's manual, For the other operation, please refer to the operation manual ofthe x-ray machine 1.2 Notes for Using1. Safety Information When using the equipment, take the following precautions. Otherwise, problems may occur and the equipment may not function correctly Before using ‘+ Please check whether the USB connector is dry or clean before connecting the USB connector + Please hold the control box of the USB when plugging the USB connector, do not touch the pin of USB connector: During using + Donot move the USB connector during the use of the sensor + When the sensor is working, the temperature of the sensor will increase. Please pay attention to the temperature of the sensor to avoid the risk of injury. + The detector should warm up for 15 minutes before exposure or updating the gain map or defect map. During exposure + Donot move the power or Ethernet Cables during exposure, or it may cause image noise or artifacts, + even incorrect images, + Donot use the devices near the equipment generating a strong magnetic field. Otherwise, it may ____ cause image noise, artifacts or even incorrect images. After using + Afterthe USB port is pulled out, please take care of the USB connector to avoid the risk of damage. ‘The sensor should be stored in a place free of chemicals or gases and free from adverse factors such as pressure, high temperature, humidity, direct sunlight, dust, oxides or sulfides. ‘When the sensor is out of using, itis recommended to put it into the product package box, to avoid damage. 1.3 Storage and Operation Environment Ensure that the sensor is stored and used in the following environment Operation 10~40°C <0.5'C/min | 20-90% RH | 700~1060mbar | <10 mbar/hour Storage -10~60°C <1°C/min 10~95% RH <20 mbar/hour 7 Do not operate the Fonsor atan aluade more than S000m, the system Connected with The FOnVOr also Can OpCTATS aT Sh aTNEGE less than 300m, + Bonot expose the sensor toa hot and humid environment, otherwise it may result in product damageDigital Intraoral X-Ray Imaging System DX1 2.General Introduction 2.1 Application scope. 2.2 Component of the imaging system...... 2.3 operation environment. 10 10 132. General Introduction 2.1 Application scope Digital Intraoral X-Ray Imaging System DX01 is used in conjunction with dental X-ray photography in medical units. The product is used for dental X-ray examination, the diagnosis of structural diseases of teeth, jaws and mouth. The product is expected to be used in hospitals and clinics, operated and used by trained professionals under the guidance of doctors. This device is not suitable for pregnant women. According to the expected use of DXO1 and the result of risk assessment, the product basic function was identified: image acquisition of X-ray sensor and image process. This manual contains information about DX01. All users should read and understand this manual before using the product. All information in this manual, including illustrations, is based on the device prototype. Ifthe device does not contain these contents, they will not apply to this device. 2,2 Component of the imaging system The component of digital intraoral X-ray imaging system are sensor and image acquisition workstation 2.2.1 Image acquisition workstation The image acquisition workstation is used to acquire and display the image, patient management, examination management, image storage and image printing administration. Note: the detail description of the image acquisition workstation are showed in the user manual of the CRFC 2.2.2 SENSOR The sensor DXO1 is a digital size-1 intra-oral sensor. It features a 20 um pixel pitch CMOS sensor with directly deposited CsI:TI scintillator which ensures optimal resolution. Made from a strong sealed Kevlar shell, the sensor has an ergonomic design with smooth edges, rounded corners, and a flexible cable for maximum patient comfort. An easy to use hi-speed direct USB interface enables a simple connection to aPC without need for an additional control box. The optional X-Ray intra-oral software application makes view and share images from the DX01 sensor. it easy to acquire, enhance, analyz 10Digital Intraoral X-Ray Imaging System Main Characteristics CMOS detector technology Low dose clinical imaging High resolution Wide dynamic range Standard Size | accommodate children and adults Slim, rounded comer and smooth edge Direct USB connectivity AED trigger, fast and easy workflow Durable material and components Anti-drop with a maximum height of 1.5m Friendly software user interfaceDigital Intraoral X-Ray Imaging System DX01 Technical Specification Item Detailed information Purpose Intro-oral X-Ray sensor Largest pixel matrix 1000x1500 Pixel pitch 20 um Scintillation Screen CsI Sensor size 38.5mmx2SmmxSmm AD Conversion l6bits Limited:251p/mm Spatial resolution , Typical:>20Ip/mm Ingress Protection IP68n Sensitivity >50Isb/nGy Max linearity dose >500uGy Length of cable Sm(standard), 8m(option) interface Direct USB, USB2.0 Power <0.8WDigital Intraoral X-Ray Imaging System 2.3 Operation Environment PC configuration standard: System Recommand configuration Minimum configuration System configuration CPU + IntelCore i3 (R) frequency > 2.5G CPU : IntelPentium(R) frequency > 2.06 Memory : 8GDDR3/4 Memory : 4GDDR3/4 Hard disk : 1T Hard disk : 500G Monitor : 1920x1080 [Monitor : 1280x768 Network card : pci-e1000M| Network card : pci-e1000M| Other hardware Support Serial port communication, USB2.0 port Os Win7, WIN8, Winl0 PC connected to the sensor must be approved by local authorities: for example, by IEC (CE certification), UL ‘A approval. PC connected to the sensor must be supported work in an altitude less than 3000ZDigital Intraoral X-Ray Imaging System DX1 3.Hardware Installation 14 3.1 Sensor Installation...scsssssssessssessnsseeneense 15 3.2 Software Fuction. 16 3.3 Working Conditions ..... 7 3.4 Basic Inspection Operation 18 3.5 Log In To The Console Software.... 18 3.6 Add Study. 19 3.7 Edit Study, 20 3.8 Search Study....... ed 3.9 Image Acquisition 23 3.10 Image Editing......... 224 11 Report, 27 3 3.12 System Management... 3.13 Option. 3.14 Optimization Mode. 3.15 Change Password. 3 16 Minimize Software. 3.17 Close The Software...This chapter mainly introduces the use of software DTFC to connect the sensor and realize the basic image acquisition and image processing functions. Attention: 1. Please turn off antivirus software or cut off internet access while software is running. 2.Please install Microsft Runtimes AIO before install DTFC software. 3.1 Sensor Installation Plug USB port of sensor into the computer. Double-click to run the “DTFC.exe”, to enter into the Language interface, see figure 3.1.1 @ seeseane 1 Language interface Note: select w32 or x64 according to the computer system. After Language is chosen successfully, the Installation interface will be entered, see figure 3.1.2 Figure 3.1.2 Installation interfaceWhen installing the software, you can choose to install the medical version or the vet version, Click the Next, and the following interface will appear: — a =o Figure 3.1.3 Installation interface-2 Note: Tick "Human" for medical dental software, "Vet" for veterinary dental software, and then click "Next" Following the Next step to finish the installation. Figure 3.1.4 DTFC signal 3.2 Software Function 3.2.1 Inspection management ase management function: including the management of patient information, examination information and image; 3.2.2 Image acquisition 1, Digital photography function; 2. Mirror image and rotation are selected according to different positions; 3. Real time automatic window width and level adjustment; 4, Itcan display patient information . examination information . equipment information . image information; 5. Real time prompt the storage capacity of the system; 6. Real time edge enhancement. 13.2.3 Image processing 1. Adjustment of window width and window level; 2. Positive and negative film conversion, image zooming, translation, mirror image, rotation, magnifying glass display; 3. You can select the original display of the region of interest and adjust the window width and level; 4. Image annotation function, including orientation and text; 3.2.4 Image output Image export, can export the patient examination to the specified location, support BMP, JPG, PNG, tiff, DCM, raw format. 3.3 Working Conditions computer system Recommand configuration Minimum configuration CPU : IntelCore i3 (R) frequency> 2.5G CPU : IntelPentium(R) frequency> 2.0G Memory: 8g DDR3/4high speed memory Memory: 4G DDR3/4high speed memory Hard disk: Ithigh speed Hard disk: 500 g high speed hard disk hard disk Display: resolution Display: resolution 1920 x 1080 1280 x 768, Network card: PCI-E 1000m adaptive| Network adapter [Network card: PCI-E 1000m adaptive| Network adapter Other hardware Serial communication support, USB2.0 Interface Computer operating A A Stem Win7, WIN8, Winl0 173.4 Basic Inspection Operation This part mainly explains how to check a patient through the software of digital intraoral image board control system. Make sure that the sensor is connected with the computer and the debugging is completed before the basic inspection The console is the main part of the interaction between the system and users. What can be done by the console: 1 Login system I Register locally, add a new check and edit the existing information for this check. 1 Exposure to get the image. | Browse images, delete, save, or export. 1 After all images of a check have been taken, turn off the check. I Select the output destination of the image 3.5 Log in to the Console Software 3.5.1 Start the console software (the system can also set the software to start automatically), and the console software will pop up and log in during the startup process The dialog box is as follows: Figure 3.5.1 Log in interface Note: passwords are case sensitive. If you need to change your password, please refer to system administration settings. 3.5.2 In the user login window, enter the correct user number, enter the correct password in the input password column, and press the [OK] button to enter the login interface. If you do not want to enter the system, click [Close] in the upper right commer to exit. (if you do not know your login password, please consult your system administrator). By default, there is only one user, admin, without password. 18r successful login, the main interface of the console software appears, as shown in the figure Figure 3.5.2Main interface 3.6 Add Study After the registration of patient information system is successful, it enters the main interface of the system. Before image acquisition, the patient and examination information corresponding to the image must be determined. 1. Input patient information in the main interface, as follows a. Click in the main interface of the software [fll [Add Study] , and the new patient examination interface will pop up, as shown in the following figure: Figure 3.6.1 Add study interface 19Enter the patient information in the corresponding column of the new patient examination interface, including patient ID, patient name, gender, age, date of birth, doctor's name, and diagnosis description. information, You can press the tab key to switch between the items. After the birth date is added, the system will automatically calculate the age and display it.Note: the items marked with * are required to ensure that the patient name and [D number you input are correct, and the ID numbers of different patients are different. Incorrect input will lead to ‘epeated entry of the same patient or increase the difficulty of future query work; for convenience and uniqueness, the system will generate automatically, and the user can also ‘change it manually. It is recommended not to change it, b. Ifa patient's record has been opened, you need to check the CAdd study) MEEIMMMT box in the new file c. After entering the patient information for the new examination, click the LOK]. button at the lower right to save the current input information, and the interface for new examination will be closed. The tooth module can select a single tooth to click on d. In the new check interface, click [Cancel] to clear the current input information and close the new check interface. The tooth module cannot be clicked Edit Stud: Wien nomnew check is added, the [Edit Study] button is grayed out not clickable; When anew check has been added, the [Edit Study] button will be on ff, You can click.Click the [Edit Study] buiton to open the modification check interface Figure 3.7.1 Edit study interface 20In the information modification interface, click OK, Patient information can be modified After modification, click [OK] to save the modification, and click [Cancel] to exit 3.8 Search Study Click the [Search Study] {SW button, pop up the search page, this function can mainly search the examination information of historical patients. The top part of the search page is a filter. At the bottom of the search page is the presentation list. Figure 3.8.1 Search study interface Start date: is the point in time when the project activity starts.Click on the inpur bos you can enter the modification date Click the inverted triangle nual » pop up the date pop-up box. Inthe calendar pop-up window, click the button] “The year is minus one year from the present.Click the button »P Th 4, month minus month; click the ‘ar adds one year to the present, Click the button button ® Months add one month to the present;Figure 3.8.2 State date interface End date: Is the time when the project activity ends. Click on the input box SRM, you can enter the modification date. Click the inverted triangle button Mf, pop up the date pop-up box In the calendar pop-up window, click the button [44 The year is minus one year from the present.Click the button bP | The year adds one year to the present.Click the button € , month minus month; click the button Months add one month to the present; Figure 3.8.3 End date interface3.9 Image Acquisition here are three ways to enter the image acquisition interface: First, click in the main interface of the softwar. + Click the [Add Study} button to open the new patient examination interface to complete the new examination Second, Select Recent Files from the main screen of the software AMMEMUM) Enter the collection interface. Third, click in the main interface of the softwar and select an unfinished check 3.9.1 Select the lower tooth template and the corresponding tooth position will be selected by default. Click [Search Study] to pop up the search page Figure 3.91 Status interface 3.9.2 We put the detector in the mouth, and on the front of the detector, that's the tooth that we're going to photograph. 3.9.3 Click the [Exposure] button to start the exposure 3.9.4 If you have more than one shot, repeat steps 1-3 above. 3.9.5 Click the CView] MBM burton 01 jenter the image editing interface. 3.9.6 Move the mouse to the tooth module and right click, you can choose import, export, edit, de the full mouth, copy, paste, refresh, open the directory where the image is, as shown in the figure 23Figure 3.9.2 Edit interface import, export, delete, refresh toolbar: read, sa Figure 3.9.3 Main interface 3.10 Image Editing 3.10.1 Image editing Figure 3.10.1 Image editing interface If the checked image is modified, it includes: window width and window level adjustment, tooth position modification, annotation modification, patient information modification and examination replacement, ete 3.10.1.2 Handling tools 24You can operate and manage images through the toolbar buttons Button Effect Describe Moving images Press the left button in the image area and move the mouse to realize the image| moving, The initial state ofthe system is moving Inverse color Click this button to invert the black and white area of the image. ‘Window width and level ofinterest ‘After pressing, the left mouse bution is converted te the window width and window level of interest Reset Click this button to restore the image to its original state Default window frame level Click to restore the default window width and window level value Magnification type Drag the mouse up the image area to zoom in; drag down to zoom out; Sl Bees Adaptive size Size of auto overlay image area Rotate 90 degrees Rotate 90 degrees clockwise Rotation - 90 degrees Rotate 90 degrees counterclockwise Upside down Click this button to flip the image vertically and switch up and down Flip left and right Click this button to flip the image horizontally and switeh left and right Angle measurement Hick ts button and clek the mouse the Tage Uioplny area To determine he Slarling point, veriex and end point ol the good angle: and the system will sutomalicelly display the angle size. The angle i eisplayed atthe starting point, Distance measurement Click this button, in the image display area, press the left ‘mouse button and drag out smarking line,Active operation isthe same as angle measurement Text annotation ‘After clicking, the left mouse button is converted fo text annotation funetion, Click in the image area to display the text annotation input box, Valid only if delete Delete current image Delete too! Delete the current tool, including dimensions, angles, distances, crop boxes, and so on Point gray value Click this button, in the image display area, the cursor will automatically switch to the gray value and move the lightMark to the target position, you can See its gray value.Click the button again to exit the operationMake. magnifier Click the button and click the image to pop up the zoom area box: Tissue lens (Click this bution, click the left mouse button in the image display area, and the ROT enlargement window will appear, and the window will display the enlarged image of the optimized area Original size Click the button to restore the image to its original size layout Multiple panes can be displayed Application of correction Ito 1 shows the image According to correction Measuring the actual length of the horizontal and vertical axes displayed on the display is enteredbelow, used ocalibrate the image display toa size of Ito |4,6.1.3 Advanced processin; Tn order to obtain high-quality images, operators need to clearly understand the role of each parameter Tsed to adjust the slobal contrast of the pieture-The higher the contrast | contrast, the greater the black-and-white contrast of the image, ratio and the lower the contrast, the smaller the black-and-white contrast of the image. The principle is the same as gamma correction. The dark part and the light part in the image signal are increased in Gamma | proportion Improve the image contrast effect, Usedto adjust he clarity of image edge and texture detail . (iftrabecular bone or lung texture). The higherthe edge value, the Edge | clearer the image details, However larger edge value will also Used to remove noise from pictures. The largerthe noise Noise suppression value, the stronger the smoothness of the image Edges and texture details also blur. 3.11 Report 3.11.1 Reportar n editor Click [Update] button to select insert annotation template or manually enter annotation information, and then click "Save". Figure 3.11-1 Update interface 273.11.2 Report to print Click the [Print Report] Milimaeal button or the EPrint Full 7 printing page. - . GAREY button to enter the report a Figure 3.11.2 Report interface Click the [Print] button to print the report 3.12 System Management This part mainly introduces the control management and configuration function of the system. The main menu of the system provides the system control and management functions outside the inspection process, It mainly includes: options, optimization mode, password management [Management] :Enter the [management] 2 | options from the management button in the status bar, including options, optimization mode and password management. e#O (a Figure 3.12.1 Set interface3.13 Option Figure 3.13.1 Option interface 3.13.1 System parameters Including detector driver, high voltage generator driver, storage directory, detector file. [Hospital] : Manually enter the hospital name Uimage storage directory] : Specifies the path of the patient examination image in the local computer storage space. CLanguage] : support for system language version, and switch between Chinese and English versions can be realized by selecting (og level] :From the detailed level of the recording process, from coarse to fine, it is normal mode, normal mode, detailed mode and complete mode. Note: under normal use, normal mode and normal mode can be used. In debugging or tracing problems, select detailed mode and full mode. In detailed and full mode, logs are very detailed, which can cause large log files in the log directory. Therefore, attention should be paid when opening logs at a high level 3.13.2 Hardware Selective detector drive Figure 3.13.1 Camera application interface 293.13.3UL: Figure 3.13.2 Hardware interface 1. File format display: Fast name, last name or last name,Fast Name 2.Choose a different dental map 3.13.4 Template Figure 3.13.3 Ul interface 1. Image annotation template editing, adding and removing 2. Print template editing Figure 3.13.4 Template interface 303.14 Optimization mode In optimization mode, there are three operation buttons that can be selected, [Rotation] . {Flip} . [Optimization mode} Figure 3,14,1 Optimize interface click the rotation drop-down box, and there are 0, 90, 180, 2 (Rotation) automatically during post-processing on the image acquisition interface ‘angles to rotate, Select an angle to rotate the image [Flip] : click the rotation drop-down box to turn left and right, up and down. In the image acquisition interface, the image will be flipped automatically during post-processing, [optimization mode] click drop-down width is the combination parameter of image enhancement and window width and window level, which is given by algorithm department through data Click HEBD then there willbe a drop-down box for image enhancement, window width and window level, which can be combined BY yourself, As shown below (Enhance) : image enhancement Figure 3.14.2 Optimize interface-2 (www) without changing the gray value, the window width and window level areadjusted to make the film reading effect, better. 33.15 Change Password Click {Management] inthe statusbar [Change password] to change the password.As shown in the figure below Figure3.15.1 Change password interface old password] : the previous password, there is n0 passwordin he factory stats ofthe software, s0 it isnot necessary toil in this column, (New password] : the user sets a new password by himself; [Confirm] :Enter the new password set by the user again: Figure 3.15.2 Change password interface-2 [old password) : If the old password is incorrect, an error message will pop up; the user needs to re-enter the old password; Figure 3.15.3 Change password interface-3 32.[New password] : If the two input as like as two peas is inconsistent, the error message will be popped up; the user will need to enter two identical passwords After the password is modified successfully, click [OK] [2]. prompt message of successful modification will pop up.As shown in the figure below Figure 3.15.4 Change password interface-4 3.16 Minimize software {Minimize} : Click the (Minimize) Ell button in the status bar,the software is minimized 3.17. Close the software {close} : Click on the status bar [Close], button, the following dialog box appears, as shown In the figure: Figure 3.15.5 Close interface Select [0K] to exit the software and click [Cancel] to close the dialog box and return to the previous level.Appendix A. Information of Manufactures COMPANY Jiangsu Dynamic Medical Technology Co.,Ltd ADDRESS —_No, 108Xingpu Road,Lujia Town, Kunshan City Jiangsu Province,218331 TELEPHONE : +86-0512-82627666 FAX +86-0512-82603908 HOMEPAGE — www.dynamicgroup.cn 34