Greywater Recycling: Hydraloop Data Sheet

Contact
Contactus
Contact us on0844
uson
on 0844
016368840015
8840015
815254 www.stormsaver.com
www.stormsaver.com

Applications
The Hydraloop system can provide treated recycled water for a
wide range of applications:
• Toilet flushing
• Washing machine
• Garden watering
• Swimming pool
*Drip irrigation systems are not suited to this product due to the flow rates and
pumping system required for irrigation purposes

Location
The Hydraloop unit is designed for installation inside the
building, ideally located close to wastepipes delivering a
supply of water to recycle from showers, baths and the
washing machine. The unit can be located in a utility, garage or
basement depending on the property type.

85%
Recycling of
• The unit should be installed on a suitable floor / base
capable of supporting the Hydraloop unit together with
the weight of the water at full capacity and associated
your water pipework
• The unit requires access for maintenance with a minimum
of 600mm above, 1000mm in front of the cover and
Hydraloop allowing for the floor to be drilled out for connection of
Greywater Recycling System •
pipework.
The unit requires a temperature controlled environment

Product Description Services

The Hydraloop system has been designed to provide a self- This system supplies a direct, pressurised supply of water to
contained, high quality greywater recycling system. appliances using a small membrane booster pump. During
The Hydraloop system is an innovative in-house water periods of insufficient recycled water, an automatic supply of
recycling system which collects shower, bath and washing mains water is used to top up the system via a compliant air
machine water. The Hydraloop cleans and disinfects the water, break.
recycling up to 85% of total in-house domestic water used.
The Hydraloop is unique because it is a complete greywater The unit will require services for:
recycling system combining tank, filters, pumps and controls • Incoming gravity greywater supply from shower, bath and
all in one unit. washing machine (not the kitchen sink)
• Hydraloop overflow should be fitted to waste soil pipe
The Hydraloop is designed simply for plug and play • Mains electrical supply
installation. The unit can be offloaded from a delivery vehicle • Mains water supply for top-up for period of low recycled
and connected to your appliances with minimum cost of water
installation for filters, tanks, control units and header tanks • Pressurised supply of fresh, clean recycled water to points
located around the building. of use, such as toilets and washing machines etc
This all in one unit will save time on installation costs,
save water and save money on your water bills as well as *For periods when there is a low yield of recycled water, it is
contributing towards your sustainable goals. important to ensure that there is a mainswater backup with
The Hydraloop system can be used in domestic environments suitable pressure to match the demand of the system.
typically of 4-6 persons and is suited for new builds and retrofit
projects.

Stormsaver Ltd. T 01636 815254

Hockerton Moor Enterprise Park e [email protected]
Winkburn Lane | Hockerton Like us on facebook
Newark | Nottinghamshire Follow us on twitter
NG22 8FL

The document design rights and copyright remains the property of Stormsaver Ltd. Contact us on 01636 815254 for more details www.stormsaver.com
 AboveGreywater Recycling:
Ground Sectional Hydraloop
Storage DataSheet
Tank Data Sheet

Contact
Contactus
Contact us on0844
uson
on 0844
016368840015
8840015
815254 www.stormsaver.com
www.stormsaver.com

Technical Information Multiple stage treatment and disinfection process

The Hydraloop is manufactured and delivered to site for

rapid installation. All systems are tested by Stormsaver, a full
certification is given on completion for warranty purposes.

Caution: Care should be taken to prevent cleaning products

entering the incoming greywater inlet. Do not use chemical
cleaning products such as bleach, for cleaning bathroom
fittings etc. The chemicals can damage the filtration process
within the Hydraloop system.

Only use biodegradeable cleaning and bathing products.

Connections
Greywater inlet 40mm

Greywater overflow
40mm

Mainswater
9 8
inlet pipe 7 6 1 5
2
/ ” BSP 4 3 2 1

Recycled water pressurised pipe 1

/2” BSP H

Technical Drawing
The Hydraloop system recycles incoming water using a
multiple stage filtration process including non chemical
treatment to disinfection and supply clean, clear recycled
water on demand. G

Technical Information
Available water 85% of water is recycled (unit designed for a 4 -
1850

6 person home)
1875

Dimensions 1875mmH x 800mmW x 340mmD

F

Dry weight 50kg (approx.)

Wet weight 350kg (approx.)
Offloading The unit is delivered on a pallet for offloading on
site (by the client) E
90
Colour options Stone (Grey)
Chili (Red)
Dew (Green/Blue)
Greywater Inlet Gravity inlet feed 40mm
D

Greywater 4 x 1/2’’ connections

Outlet
Wastewater Gravity overflow feed with integral skimming
Overflow overflow device 40mm
C
340

Controls The service cabinet is accessed via the

800 removable cover
Frost protection The unit is not frost protected and must be
installed internally and not exposed to the
elements B

Stormsaver Ltd. T 01636 815254 UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS
FINISH: DEBURR AND
BREAK SHARP
DO NOT SCALE DRAWING REVISION
SURFACE FINISH: EDGES

Hockerton Moor Enterprise Park e [email protected]

TOLERANCES:
LINEAR:
ANGULAR:

NAME SIGNATURE DATE TITLE:

Winkburn Lane | Hockerton Like us on facebook DRAWN

CHK'D

APPV'D A
Newark | Nottinghamshire Follow us on twitter MFG
MATERIAL: DWG NO.

Hydraloop
Q.A
A2
NG22 8FL WEIGHT: SCALE:1:20 SHEET 1 OF 1

9 8 7 6 5 4 3 2 1
The document design rights and copyright remains the property of Stormsaver Ltd. Contact us on 01636 815254 for more details www.stormsaver.com
 Greywater Recycling: Hydraloop Data Sheet

Contact us on 01636 815254 www.stormsaver.com

Technical Details Hydraloop Pump Capabilities (Head)
14

Technical details Hydraloop

Power supply in 230V AC / 50-60 Hz 12

Power consumption ±200 kWh/year 10

Internal current 24V 4A max

8

Max. working pressure 2.5 – 3.5 bar

L/m
6

Max. flow 10 Litres / minute

Primary pressure 2.5 – 3.4 Bar (Mains Supply) 4

Pump start pressure 1.8 – 2.5 bar 2

Protection class IP 54
0
0 0.5 1 1.5 2 2.5 3 3.5 4

Max. application height 10 Metres* Bar

above control unit *Ensure that toilets, washing machines or other applications are not above the
maximum application level
Application Low flow rates such as a Please ensure that the Hyrdaloop meets your correct flow requirements.
toilet flushing, washing Any queries please contact Stormsaver Technical Support 01636 815254
machine and hose

Shower
Bath
Greywater input

Lift
pump
Washing
Recycled
machine
water

WiFi connection
Outside
tap
Drain to sewer
Mains water supply
Power supply
Toilet (s)

*This is not an accurate representation of plumbing services which will be site specific
Stormsaver Ltd. T 01636 815254
Hockerton Moor Enterprise Park e [email protected]
Winkburn Lane | Hockerton Like us on facebook
Newark | Nottinghamshire Follow us on twitter
NG22 8FL

The document design rights and copyright remains the property of Stormsaver Ltd. Contact us on 01636 815254 for more details www.stormsaver.com