Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    PLATINUM PRO PLUGin R34 Rev E

    Uploaded by

    guangyuan gao
    The document provides specifications for the Haltech Pro Plug-in ECU for the Nissan Skyline GT-R R34. It lists all supported features, inputs, outputs, functions, correction tables, and physical specifications of the ECU. It is designed to directly replace the OEM ECU with no rewiring needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PLATINUM PRO PLUGin R34 Rev E

    Uploaded by

    guangyuan gao
    18 views1 page
    The document provides specifications for the Haltech Pro Plug-in ECU for the Nissan Skyline GT-R R34. It lists all supported features, inputs, outputs, functions, correction tables, and physical specifications of the ECU. It is designed to directly replace the OEM ECU with no rewiring needed.

    Original Title

    PLATINUM_PRO_PLUGin_R34_Rev_E

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for the Haltech Pro Plug-in ECU for the Nissan Skyline GT-R R34. It lists all supported features, inputs, outputs, functions, correction tables, and physical specifications of the ECU. It is designed to directly replace the OEM ECU with no rewiring needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views1 page

    PLATINUM PRO PLUGin R34 Rev E

    Uploaded by

    guangyuan gao
    The document provides specifications for the Haltech Pro Plug-in ECU for the Nissan Skyline GT-R R34. It lists all supported features, inputs, outputs, functions, correction tables, and physical specifications of the ECU. It is designed to directly replace the OEM ECU with no rewiring needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PRO PLUG-IN

    NISSAN SKYLINE GT-R (R34)


    Haltech Part # HT055106
    SPECIFICATIONS
    Supported Models: Nissan Skyline GT-R (R34)
    Variations: GT-R
    Engine Codes: RB26DETT
    Transmission: Manual only
    Features: Direct plug and play replacement of the OEM ECU, No rewiring necessary
    Uses the cars factory sensors
    Supports Sequential Injection (peak and hold) and Direct fire ignition
    Windows 2000, XP, Vista, Windows 7 compatible software
    Real time programming, instant hesitation free adjustment while engine is running
    Fully user definable 32 x 32 mapping
    Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
    Diagnostic Trouble Code Storing & Check Engine Light Control (Access through laptop only)
    Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
    Wideband “auto tuning” using user definable target AFR table
    USB and CAN Communication Port

    Factory Outputs: 6 x Fuel Injector outputs 6 x Ignition outputs Tacho


    Boost Control AC Clutch Relay Idle Control
    Thermo Fan Check Engine Light Fuel Pump (variable speed)

    Factory Inputs: MAF sensors Throttle Position Sensor Knock Detection Sensors
    Oxygen sensors Coolant Temperature sensor Vehicle Speed Sensor
    Air Temperature sensor

    Expansion I/O*: *Optional auxiliary harness can be purchased Haltech Part # HT040003

    2 x Analogue Voltage inputs 1 x Digital Pulsed Input 4 x Digital Outputs


    Configurable for: Aux Rev Limiter Flex Fuel Composition Sensor Air Temperature Switch
    Brake Pedal Input Speed Sensors Aux Fuel Pump
    Flat Shift Battery Light
    NOS Enable Coolant Temperature Switch
    Fuel Pressure Sensor Generic Duty Output
    External Map Sensor (Up to 145psi) MAP Sensor Switch
    Oil Pressure Sensor Nitrous Activation Switch
    Wideband O2 Sensors RPM Switch
    Tacho Output
    Thermofan 2 Switch
    Vehicle Speed Switch

    Functions: Closed Loop O2 Control Knock Control Long Term Fuel Trim
    Over Boost Rev Limiter Closed & Open Loop Boost Control
    Gear Setup Transient Throttle Enhance Decel Cut

    Correction Tables: Fuel Ignition Boost


    Cranking Cranking Air Temp Target Correction
    Air Temperature Correction Air Temperature Correction Air Temp Duty Correction
    Coolant Temperature Correction Coolant Temperature Correction Coolant Temp Correction
    Map Correction Zero Throttle Gear Correction
    Cylinder Trim Cylinder Trim TPS Correction
    Generic Correction 1* Generic Correction 1* Generic Correction*
    Generic Correction 2* Generic Correction 2*
    Gear Correction Gear Correction
    Post Start
    *Generic Correction tables have user definable axis

    Miscellaneous: Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at
    10 logs per seconds, 6 channels of data, Max 20 channels logging capability
    Tune can be password protected in software
    Rugged anodized aluminum casing

    Power Requirements:
    Source: 8.6 to 16.5 Volts DC
    Consumption: 530mA @ 12Volts DC

    Physical Specifications:
    ECU Dimensions Length: 154mm (174mm with MAP nipple)
    Width: 158mm
    Height: 42mm
    Weight: 680g (1.5 lb)
    Platinum Pro Plug-in Kit
    Includes: Pro Plug-in ECU
    USB Cable
    Programming Software CD
    Quick Start Guide
    Instruction Manual (on CD)
    Haltech Sticker
    For Racing Use Only Rev E

    You might also like