7516 Instruc Blouse Sina EN

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SEWING

INSTRUCTION

a"
B lo us e " S in
M o d e l 7 5 16
 48
S iz e s 36  -

PRINT THE CUT oughly. Close the darts of the sleeves.


1. Open the pattern PDF and set the control square to Page 2. Depending on the size, pin approx. 18 to 24 cm elastic
1 with the setting "Original size" on DIN Print A4 paper along the crossline on the wrong fabric side of the
(US-Letter) ( do not click on "Adjustment to page size"! ) sleeves. Stretch the fabric and sew on the elastic from
2. Check the square – if it is 10 x 10 cm, print out the whole the right side with the running stitch (stitch 4) or alter-
cut sheet. natively with a zigzag stitch.
3. Place all pages next to each other as indicated by the arrows 3. Sew the sleeves on the front and the back part. Close the
and adhere them row by row along the boundary lines, shoulder seams of the yoke parts. Finish all seams. Close
then glue the rows together. the seam on the rear yoke part beneath the slit marking.
4. Compare the body measurements with the table measure- Iron the allowances apart.
ments and cut out the cut parts in the appropriate size 4. If necessary, sew the fabric strips for the shoulder frill to-
( the overview of the cut parts is on the pattern sheet ). gether so that the overall length is achieved. Iron the
Important: Instructions do not include seam allowances, frill strips lengthways on the fold. Attach the Ruffler
unless otherwise indicated. foot and set every 6th pleat and stitch length about 4.8.
Fold the strips. Alternatively, fold little pleats every 2 to
3 cm and baste them.
SUPPLIES 5. Close the shoulder frill at the length of 123 / 1 26 / 
• 1.6 – 1.7 m rayon, 140 cm wide 129 / 132 / 135 / 138 / 141  cm to a ring and pin it to the
• Fabric lining G 710 ( Vlieseline ) edge of the front part, the back part and the sleeves.
• 1 button to coat, 11 mm in diameter ( Prym ) Sew on the frill. Sew the upper edge on the yoke parts
• 0.5 – 0.7 m elastic, approx. 0.7 cm wide and finish the seams. Successively, close the seams of
Optional BERNINA accessories the sleeve and the sides.
• Ruffler foot 86 6. Iron both long edges of the loop closure 0.5 cm to the
wrong side. Place the folded edges on top of each other
CUTTING and topstitch the loop closure. Pin the loop closure on the
1 1 × front part on the fold narrow edge of the right collar side.
2 1 × front yoke on the fold 7. Match the length of the collar frill with the length of the
3 1 × back part on the fold upper edge of the collar and hem the edges. Pin the frill
4 2 × rear yoke along the upper edge of the collar part and place the
5 2 × stand-up collar on the fold second collar part on top. Sew the narrow edges and
6 2 × sleeve the upper edge right side on right side together.
Collar frill 75 × 4 cm. Shoulder frill 180 up to 210 × 12 cm. 8. Pin the open edges of the collar on top of each other. Sew
Loop closure 5 × 2 cm. Fabric lining 1 × collar on the fold. the collar along the neckline. Hem the sleeves and the
blouse. Coat the button according to the packing in-
INSTRUCTIONS structions and sew it on.
1. Iron the fabric lining on the collar and let it cool off thor-

You might also like