Valve Automation Technologies from Emerson

The most comprehensive and proven portfolio available anywhere

The Most Comprehensive and Proven Portfolio Available Anywhere

The breadth of products described in this

brochure ensures you get a solution that best fits
your application needs in a wide variety of valve This easy to use, intelligent solution has simplified the
automation of rotary valves significantly by integrating the
operating situations. Our offering is a combination
controls and feedback within a single product. The flexible
of best-in-class technologies of pneumatic, modular design enables units to be adapted to meet individual
hydraulic, gas-hydraulic, electro-hydraulic, and plant requirements and is ideal for both simple and complex
applications. Product development based on modular
electric actuators with controls. construction allows for fast delivery from stock components
and easy upgrade to fully-fledged control units. Actuators can
Our expertise, gathered over many years in be provided with electronic controls for problem-free digital
several different industries, concludes that proper communication.

actuator and controls selection is critical to reliable

valve operation. This Emerson combination of
knowledge, experience, and products ensures you Associated with high quality valve automation and specializing
optimise cost, performance, reliability and safety in high performance pneumatic actuators, the Hytork™
brand has been recently expanded to provide a wide range
as needed for each specific application. of customer requested features and specialized solenoid
valves, developed to satisfy defined customer needs and have
rapidly become accepted as the standard for this offering. This
highly reliable actuator continues to demonstrate excellent
performance in some of the most difficult on-off process
One of the first brands to be established in the valve actuator applications.
business, Bettis products are used in almost every energy-
related industry. Today the actuator range includes linear,
quarter-turn scotch-yoke, rack and pinion and electric options,
powered by compressed gas, hydraulic and electric sources to
satisfy a vast range of automation requirements. Primarily used in the gas transmission pipeline industry where
reliability is crucial, Shafer™ products have become recognized
as “guardians of the world’s pipelines” involving the safe control
of critical applications. These also include the demands of
offshore platforms and subsea pipelines plus highly challenging
Dantorque is the market leader in subsea actuator technology. pipeline applications in metals, mining and other process
In recent years, Dantorque™ concentric and compact industries.
valve actuators have been increasingly used in deep water
applications in several of the major subsea developments Technology Platform Emerson
around the world.
Scotch-Yoke
Linear
Rotary Vane
Helical Spline
Rack & Pinion
For over 60 years EIM™ has manufactured high quality electric,
high pressure/low pressure fluid powered and manual valve Quarter-Turn Electrics
actuators. EIM is proud to have developed and patented Multi-Turn Electrics
a number of basic designs now used throughout the valve
Controls and accessories
actuator industry. EIM continues to innovate, offering highly
reliable valve actuators for virtually any application. • Pneumatic
• Electric
• Hydraulic
• Wireless
For over 30 years, the El-O-Matic™ brand has been firmly
established and represents a wide range of pneumatic and Safety Systems
electric actuators together with control accessories. This Engineered solutions
actuator is used throughout the chemical and utility industries
in North America, Europe, and Asia. Valve operating system
Integrated packages & automation
Proven and Reliable

Scotch-Yoke actuators Linear actuators

Bettis scotch-yoke actuators are extensively used to automate quarter- Bettis GVO Series pneumatic linear actuators
turn ball, plug and butterfly valves in oil & gas and process industries. The Bettis GVO Series pneumatic actuator represents a
These actuators also provide a highly unique and reliable means of broad range of field proven linear valve actuators suitable
operating louvres, dampers and other 90˚rotating mechanisms, and are for automating most types of wedge gate valves, slab gate
available in double-acting or spring-return models. valves, knife gate valves, globe valves, tank valves and
rising stem ball and plug valves.
Their modular construction and efficient design make Bettis the most
compact and light weight actuators compared to any other scotch-yoke • Extended stroke for each model, ± 2”.
actuator in the industry. The compact dimensional envelope, light weight • E xternal tie bars allow contained release of energy in
design and reliability make Bettis most suited for critical offshore and the event of over-pressure and allow ease of inspection
Emergency Shut Down applications. Bettis actuators come with a standard and servicing.
five year warranty in addition to guaranteed torque outputs, water ingress
protection, NAMUR standardization, close couple capability and overrides. • Captivated spring rod nut prevents unauthorized
disassemble of the spring cartridge.
Bettis G-Series Robotarm II actuators • Adjustable travel stop for the rod-retract position,
• Compact design to optimise the centre of gravity piston bottoms out for the rod-extend position.
location for a lighter and smaller actuator.
• Operating Pressures
• Modular construction of Bettis G-Series enables 10 bar (150 psig)
easy online maintenance without removal of Hydraulic: To 345 bar (5,000 psig)
valve from the line.
• Standard Operating Temperature: -29 °C to + 74 °C (-10°F to +165°F)
• Field serviceable modular configuration to simplify interchangeability Optional low temperature trims available.
of the power and spring modules and the addition of manual overrides
and accessories.
• PED 97/23/EC Compliant. Rotary Vane actuators
• Meets IP 66 and IP 67M specifications for submergence and severe high Shafer RV-Series actuators
pressure water deluge test.
The Shafer rotary vane actuators are used extensively
• NAMUR mounting configuration for shaft driven accessories. on natural gas pipeline applications utilizing gas over
• Torque Outputs (guaranteed) oil power pressure for the actuator. The actuator’s
Double-acting: 1,420 – 678,000 Nm (12,581 – 6,000,000 in-lbs) compact design makes it ideal for platform and other
Spring-return end torques: In excess of 339,000 Nm (3,000,000 in-lbs) tight space applications. With a concentric geometry
the actuator is highly effective in high vibration
• Operating Pressures applications such as slurry pipelines. The rotary
Pneumatic: 3 – 14 bar (40 – 200 psig) vane’s high pressure construction allows for subsea
Hydraulic: To 345 bar (5,000 psig) applications to depths of 750 meters (2,460 feet)
• Standard Operating Temperature without the need for pressure compensation divides.
-29 °C to +93 °C (-20 °F to +200 °F) with optional high and low • Only one moving part allows for a 50 year design life backed by a 10
temperature trims available. year warranty.
• Double vane design will not produce any side loading forces on the
Bettis CBB and CBA-300 Series actuators valve stem or actuator bearings.
• Torque Outputs (guaranteed) • Balanced and constant torque is applied directly to the valve stem
CBB double-acting: throughout the complete 90˚ rotation.
To 1,301 Nm (11,515 in-lbs) • The rotary vane is the most efficient and compact actuator design
CBB spring-return end torques: available.
To 482 Nm (4,269 in-lbs)
• Torque Outputs: 113 to 677,907 Nm (1,000 to 6,000,000 in-lbs)
CBA-300 double-acting:
835 – 2,333 Nm (7,388 – 20,337 in-lbs) • Operating Pressures: 6.9 to 206.8 bar (100 to 3,000 psig)
CBA-300 spring-return end torques:
• Standard Operating Temperature : -29 °C to +121 °C (-20 °F to +250 °F)
286 – 1,182 Nm (2,532 – 10,457 in-lbs)
Optional low temperature trims available.
• Pneumatic Operating Pressures
CBB: 3 – 10 bar (40-150 psig)
CBA-300: 3 – 10 bar (40-150 psig)
• Standard Operating Temperature for CBB and CBA-300 -29 °C to +93 °C
(-20 °F to +200 °F) with optional high and low temperature trims available.
Helical Spline actuators Dantorque Helical Spline subsea actuators
and subsea gear operators
Bettis BH Series helical hydraulic actuators
Dantorque brand products include a range of specialty subsea
The BHH and BHHF actuators form a complete line of hydraulic valve actuators. The Dantorque actuators are precisely
double-acting and spring-return actuators. Compact and designed to provide engineered solutions to our client’s
concentric, the proven design provides space savings and unique requirements. Subsea technology is rapidly evolving
reliability. Using the multiple helical spline engagement with reaching greater depths than ever. Dantorque actuators
reciprocal splines on the piston, the high torque output is were specifically developed and qualified for the rigours of
constant throughout the 90˚ rotations, converting hydraulic subsea applications. The actuators have a 30 year design life
energy into rotation, with the torque output proportional to and extensive track record of installations at various depths
the supply pressure. reaching beyond 2,438 meters (8,000 feet).
Both the BHH and BHHF options can be operated in the most severe • Compact balanced design is ideal for subsea installation and retrieval.
conditions, from high vibrations to severe environment locations, while
providing a reliable valve automation solution. Easily adapted to all types • The torque producing mechanism will not produce any side loading forces
of quarter-turn valves, dampers and louvres, the mounting positions are on the valve stem.
numerous, with available controls block options for direct mount modular • Balanced and constant torque is applied directly to the valve stem
control functions. throughout the complete 90˚ rotation.
• Smallest footprint to torque ratio. • Available in both double-acting and spring-return operation with ROV
• Compact and concentric design. override capability.

• Balanced helical design eliminates side loading on valve assembly and stem. • Torque Outputs: To 406,000 Nm (To 3,595,000 in-lbs)

• High water ingress protection – IP68. • Operating Pressures: 103 or 207 bar (1,500 to 3,000 psig)

• Integrated “crossover” valves (double-acting). • Standard Operating Temperature: -20°C to +80°C (-4°C to +176°F)

• Torque Outputs: 113 to 16,044 Nm (1,000 to 142,000 lb-in) at 2000 psi

• Operating Pressures: 40 to 207 bar (580 to 3,000 psig) Rack & Pinion actuators
• Standard Operating Temperature: -20°C to +80°C (-4°F to +176°F) Using high quality materials and designs, these actuators reliably and
efficiently operate quarter-turn mechanisms including ball, butterfly and plug
valves. Applications include those with extreme temperatures and high cycles.
Shafer SH-Series actuators Control options can be added to the NAMUR interfaces to further improve
For more than 60 years, Shafer actuators have been functionality and positioning.
recognized for their reliable performance in pipeline service.
The SH-Series helical spline gas-over-oil actuator continues El-O-Matic E and P Series actuators
the tradition. The double-acting hydraulic model is perfect
• Aluminium actuators with standard NAMUR
for a variety of small valve (2′′ to 8′′) pipeline applications
interface and dual ISO 5211 valve flanges.
including transmission, meter runs, compressor stations, gas
plants etc. • E xcellent corrosion protection by powder coating,
hard anodized high grade aluminium pinion and stainless steel fasteners.
The SH-Series offers high performance features:
• Output torques range up to 4,537 Nm @ 5.5 barg (40,293 in-lbs @ 80 psig) for
• No power gas regulators and relief valves required.
double-acting models and 1,958 Nm (17,333 in-lbs) spring-end for spring-return.
• Zero Leakage Piston.
• Choice of 12 actuator sizes and six spring sets for spring-return models, for
• No Valve Stem Side Loading. cost efficient and accurate sizing.
• 50 Year Design Life Backed by 10 Year Shafer Guarantee. • Standard Operating Temperatures: -20 °C to +80 °C (-4 °F to +176 °F)
Optional high or low temperature trims available.
• Traditional Shafer High Pressure Controls with Manual Override.
• Operating pressures: To 8 bar (120 psig).
• Precise Speed Control – No Torsional Impact.
• No Internal Corrosion Problems.
Hytork XL series actuators
• Gas Hydraulic Tanks prevent gas contaminants from entering the actuator.
These heavy duty actuators have a proven track record
• Vastly Extended Seal Life.
of reliable operation in both industrial and commercial
• Torque Outputs: 254 to 2,034 Nm (2,250 to 18,000 in-lbs) applications. The XL actuator is modular in design, allowing
many different functional features to be assembled from a
• Operating Pressures: 28 to 103 bar (400 to 1,500 psig)
series of modules at the factory or on site.
• Standard Operating Temperature: -29°C to +49°C (-20°F to +120°F)
• The patented Safekey provides a quick and reliable method of spring
change and maintenance of seals to the whole range of sizes.
 Where Experience and Intelligence Counts

• 12 actuator sizes with output torques range up to 3,232 Nm @ 5.5 barg
(28,500 in-lbs @ 80 psig) for double-acting models and 1,525 Nm (13,500
Electric actuators
in-lbs) spring-end for spring-return models. Electric actuators are designed to provide optimum performance under the
most demanding on/off and modulating conditions. Our compact models are
• Standard operating temperatures: -20 °C to +100 °C (-4° F to +212 °F)
adaptable for trouble-free operation with small, medium or large valves. We
Optional high or low temperature trims available.
offer maximum duty cycles to 100%, with none lower than 30% in multiple
• Operating pressures available up to 8 bar (120 psig). motor voltages.
• The unique “CERAMIGARD” surface finish of Di-aluminium Trioxide protects
all body parts against wear and corrosion. Bettis electric actuators
Bettis electric actuators are specifically designed for
quarter-turn (90° rotation) applications on ball, butterfly
Bettis D-Series actuators
and plug valves along with dampers, vents or similar uses.
Bettis D-Series pneumatic rack and pinion actuators provide Four basic models provide torques from 11 Nm to 2,260
its users with reliability and economy in valve automation. Nm (100 in-lbs to 20,000 in-lbs). Standard on/off units are
The D-Series actuators are compact and lightweight, available along with electronic proportional positioning
making them very suitable for installation within areas of models and units with full spring-return capability for fail-safe operation.
tight piping connections.
• Compact design in weatherproof or explosion proof housings.
• Dual travel stop aluminium actuators with ISO 5211 and NAMUR interface flanges.
• High strength gearing run in needle bearings for smooth energy transfer and
• E xcellent corrosion protection by anodized and powder coat body, hard long service life.
anodized high grade aluminium pinion and stainless steel fasteners.
• Permanent lubrication reduces the need for scheduled maintenance.
• 10 actuator sizes with output torques range up to 1,676 Nm @ 5.5 barg
• Modular design readily accommodates controls and accessories such as
(14,874 in-lbs @ 80 psig) for models and 897 Nm (7,939 in-lbs) spring end for
heaters, motor brakes, positioners, transmitters and control stations.
spring-return models.
• Standard operating temperatures: -20 °C to +80 °C (-4 °F to +176 °F)
Optional high or low temperature trims available. El-O-Matic EL Series electric actuators
• Operating pressures: To 8 bar (120 psig). El-O-Matic EL series electric actuators are reliable, quality products, which
perform faultlessly no matter how demanding the circumstances. The EL range
of actuators comprises the smaller ELS, the mid range EL and larger ELD series.
FieldQ fully integrated actuators and controls
• Output torques from 18 Nm to 2,500 Nm
FieldQ provides a proven rack and pinion pneumatic (160 in-lbs to 22,126 in-lbs).
actuator with a range of sophisticated control accessories
• Hazardous and non-hazardous housings, including
in a fully integrated modular package. Gone are the non-
ATEX or FM certified enclosures.
integrated accessories from multiple vendors, mounting
brackets, cumbersome external cabling and tubing. Instead, • Low-noise, smooth running with the use of high ratio
the FieldQ solution offers true "plug and play" capability worm and wheel reduction.
from the industry’s most recognized single source.
• Compact construction and lightweight due to the use
•D
 ual travel stop, heavy duty aluminium actuators with dual ISO 5211 valve flanges. of high-grade aluminium alloys.
• E xcellent corrosion protection by anodised and powder coat body, hard • Standard Operating Temperature: -20°C to +80°C (-4°F to +176°F)
anodised high grade aluminium pinion and stainless steel fasteners. Optional high and low temperature trims available
• A range of actuator sizes with output torques range up to 1,676 Nm @ 5.5
barg (14,874 in-lbs @ 80 psig) for models and 897 Nm (7,939 in-lbs) spring El-O-Matic ELQ Series electric actuators
end for spring-return models.
Modular construction is used extensively in the ELQ
• Intelligent controls include IPT technology and are available with a range of series electric actuators. Plug-in modules are used for
fieldbus communication protocols. an extensive range of control options. These enable
• Versions with FOUNDATION™ fieldbus include diagnostics and alerts that the basic actuator specification to be easily extended
meets Emerson PlantWeb® alerts standard. to that of fully-fledged control valve actuators.
• Operating Pressures: To 8 bar (120 psig) • Low power consumption saves power and cables,
and therefore costs.
• Standard Operating Temperature: -20°C to +80°C (-4°F to +176°F)
Optional high and low temperature trims available • 100% duty rating. Can be used for all applications, and protects against
motor overheating.
• 100% torque over the entire stroke. To cover all applications, even those
valves with complex torque patterns.
• 3600 starts per hour for all demanding modulating applications.
EIM electric actuators Safety Systems
EIM Series 2000 and TEC2000™ electric actuators have been setting These systems afford protection against
industry standards for ruggedness and reliability for over 60 years in the risks posed by hazardous processes
installations around the world. Incorporates heat treated alloy steel and help to protect against upsets or
worms – aluminium bronze self-locking worm gears. failures that might threaten employee
• Multi-turn models torque ratings up to 27,116 Nm (20,000 ft.-lbs.), safety, cause environmental problems
thrust up to 4,448 kN (1,000,000 lbs.), and output speeds from 3 to or damage operating equipment. A safety instrumented system (SIS)
240 RPM. typically includes a sensor to monitor the process, a logic device to
compare process conditions to predetermined process limits, and a
• Quarter-turn models torque ratings up to 370,000 Nm final control element that can shut down or vent the process should
(272,890 ft.-lbs.) with operating times from 5 to 900 seconds. conditions reach a trip point.
• Standard housing construction for hazardous locations – SIRA/ATEX The Emerson SIL-PAC™ valve automation solution for safety systems
or FM, CSA, and Testsafe. combines scotch-yoke and rack and pinion pneumatic actuators, with
• Modular construction – Over 60% of mechanical parts are common. the diagnostics and functionality of the Fisher ® FIELDVUE® digital valve
Controls modules are same for multi-turn and quarter-turn actuators. controllers. SIL-PAC can then be mounted on the valve that meets your
requirement best.
• Standard handwheel with reduction gearing.
Actuators are IEC certified and are suitable for SIL 3 applications when
• Discrete, analog and Controlinc™ digital control – Profibus,
a periodic partial stroke test is performed or in SIL 2 application if such
Foundation Fieldbus, Device Net and Modbus RTU.
testing is not required. Emerson actuators are also ATEX certified and
• Standard Operating Temperature: -20°C to +60°C (-4°F to +140°F) protect against water ingress to IP66 and IP67M standards.

EIM TEC2000™ electric actuators Integrated packages and automation

All quarter-turn valves can
• Microprocessor-based Total Electronic Control –
now have an automation
Absolute position detector uses Hall-Effect devices
package designed and
– no batteries needed to maintain limit settings.
assembled to efficiently
• Local control elements do not penetrate enclosures – Hall-Effect and reliably suit your
devices. control loop requirements.
These packages are fitted
• Largest, easiest-to-read LCD in the industry.
to your valves and are
• Full function remote display module can be mounted up to 1,200 m entirely tested, calibrated
(4,000 ft.) and warrantied by valve
• Separate terminal chamber for field wiring – user-replaceable fuses automation experts.
accessible without opening controls compartment. With your specified valve, we can provide a complete valve operating
system which include your selected actuators, solenoids, positioners,
switches, plus other accessories. Our integrated packages are designed by
EIM Series 2000 electric actuators experienced engineers and are assembled from a ready stock of field-proven
• Highly flexible M2CP modular controls package components, to reduce your costs and shorten your delivery schedules.
eases service – remove, assemble and disassemble
and replace using a standard screwdriver. Controls and accessories
• Hinged, O-Ring sealed controls compartment cover
with captive stainless steel bolts.
across all our range
Basic actuators may be used to open and close the valve; however, if
• Mechanical dial position indication, or mechanical dial and LED digital
more functionality is required, then the actuators' specification can be
position indication.
extended by the addition of one or more of the available accessories.
These can be used to provide position signalling feedback to the
HQ Series electric quarter-turn actuators controller, provide positional control or make the actuator operate
faster or slower. Several are available with hazardous area approvals.
• Torque range 54 Nm to 2942 Nm (45 ft. lbs to 2,170 ft. lbs)
• Single-phase, three-phase, 24 VDC power including Emerson brands for most common control
fail-safe options . accessories:
• Self-locking double reduction worm gear drive Digital Valve Controllers: Fisher ®
- no motor brake required . Positioners: Fisher ®
• Declutchable manual override handwheel . Regulators: Fisher ®
Switch boxes: TopWorx
• Compact, light weight - local and remote control stations. Wireless position monitor: TopWorx
• Removable drive bushing for ease of machining. Solenoid valves: ASCO Numatics™
Serving Our Customers Globally

Over many years, Emerson has built up a reputation for providing quality
valve actuation products, with short lead times via distribution channels
and backed by factory and field experts. To consistently maintain and
improve our reputation, we operate a “Think Customer” initiative based
on competitive prices,
Waller, Texas
best service and proven
products.
Production is centred on
modern plants throughout the
world, including several that are
purpose built.
Wuqing, China
These are located strategically
in areas where the logistic
infrastructure is excellent and
the key component suppliers
are located in the same area.
All manufacturing processes
are covered by the same Nilai, Malaysia
documentation that ensures
compliance to our standardised
quality assurance programmes.
Every product and component is
subject to rigorous internal and
external checks – from design to
delivery. Hengelo, The Netherlands

When complete, the actuators

are shipped to a World Area
Configuration Centre where they
are configured to suit specific
customer needs. These centres
are located in the USA, Europe,
Mansfield, Ohio
Asia, Middle East and South Africa. In addition, Emerson has established local sales and
service centres in many countries around the world and each of these can provide after
sales support, technical advice and product information.

To provide further customer support, Emerson has partnered with over 250 companies
worldwide to distribute products and respond quickly to customer demands.

Product quality has been subject to continued enhancements and all products are
constantly reviewed so as to improve quality and reliability. Missouri City, USA
 North & South America Europe Asia Pacific

18703 GH Circle Asveldweg 11 No. 9 Gul Road

PO Box 508 7556 BR Hengelo (O) #01-02 Singapore 629361
Waller, TX 77484 The Netherlands T +65 6501 4600
USA T +31 74 256 1010 F +65 6268 0028
T +1 281 727 5300 F +31 74 291 0938
F +1 281 727 5353 9/F Gateway Building
Siemensring 112 No. 10 Ya Bao Road
2500 Park Avenue West 47877 Willich Chaoyang District
Mansfield, OH 44906 Germany Beijing 100020
USA T +49 2154 499 660 P.R.China
For more information T +1 419 529 4311 F +49 2154 499 6613 T +86 10 5821 1188
F +1 419 529 3688 F +86 10 5821 1100
25, Rue de Villeneuve
about all our products 9009 King Palm Drive Silic – BP 40434 No.15 Xing Wang Road
Tampa, FL 33619 94583 Rungis Wuqing Development Area
and services, please USA France Tianjin 301700
T +1 813 630 2255 T +33 1 49 79 73 00 P.R.China
visit our web site F +1 813 630 9449 F +33 1 49 79 73 99 T +86 22 8212 3300
F +86 22 8212 3308
13840 Pike Road Via Montello 71/73
www.EmersonProcess. Missouri City, Texas 77489 20038 Seregno (Milan) Lot 13112, Mukim Labu
USA Italy Kawasan Perindustrian Nilai
com/ValveAutomation T +1 281 499 1561 T +39 0362 2285 207 71807 Nilai, Negeri Sembilan
F +1 281 499 8445 F +39 0362 2436 55 Malaysia
or contact one of our T +60 6 799 2323
Av. Hollingsworth, 6 Bracken Hill F +60 6 799 9942
325, Iporanga Sorocaba, South West Industrial Estate
sales offices. SP 18087-105 Peterlee SR8 2LS 471 Mountain Highway
Brazil United Kingdom Bayswater, Victoria 3153
T +55 15 3238 3788 T +44 191 518 0020 Australia
F +55 15 3228 3300 F +44 191 518 0032 T +61 3 9721 0200
F +61 3 9720 0588
Middle East & Africa 2A Szturmowa Str
02-678 Warsaw Delphi B Wing, 601 & 602
P. O. Box 17033 Poland 6th Floor, Central Avenue
Dubai T +48 22 4589237 Powai, Mumbai – 400 076
United Arab Emirates F +48 22 45 89 231 India
T +971 4 811 8100 T +91 22 6662 0566
F +971 4 886 5465 C/ Francisco Gervás, 1 F +91 22 6662 0500
28108 Alcobendas – Madrid
P. O. Box 105958 Spain NOF, Shinagawa Konan Bldg
Abu Dhabi T +34 0913 586 000 1-2-5, Higashi-shinagwa
United Arab Emirates F +34 0913 589 145 Shinagwa-ku, Tokyo
T +971 2 697 2000 140-0002 Japan
F +971 2 555 0364 Letnikovskaya Str. 10-2 T +81 3 5769 6873
115114 Moscow F +81 3 5769 6902
P. O. Box 3911 Russia and FSU
Al Khobar 31952 T +7 495 981 98 11
Saudi Arabia F +7 495 981 98 10
T +966 3 814 7560
F +966 3 814 7570 Hungári körút 166-168
H-1146 Budapest
P.O. Box 10305 Hungary
Jubail 31961 T +36 1 462 4000
Saudi Arabia F +36 1 462 0505
T +966 3 340 8650
F +966 3 340 8790

P. O. Box 32281
Doha
Qatar
T +974 4 576777
F +974 4 315448

24 Angus Crescent
Longmeadow Business Estate East
P.O. Box 6908; Greenstone; 1616
Modderfontein, Extension 5
South Africa
T +27 11 451 3700
F +27 11 451 3800

For other countries that are not listed, please contact the nearest World Area Configuration Centre. ( )

The contents of this publication are presented for informational purposes only, and while every effort has been made to
ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products
or services described herein or their use or applicability. All sales are governed by our software licensing agreement
and terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or
specifications of our product and services at any time without notice.
Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. © 2012 Emerson Electric Co.
All other marks are the property of their respective owners.
DOC.8PD.VA.UK REV C 01-12