Az-104 1

AZ-104
1. Your company has serval departments. Each department has a number of virtual machines (VMs).
The company has an Azure subscription that contains a resource group named RG1.
All VMs are located in RG1.
You want to associate each VM with its respective department.
What should you do?
 A. Create Azure Management Groups for each department.

 B. Create a resource group for each department.
 C. Assign tags to the virtual machines. Most Voted
 D. Modify the settings of the virtual machines.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive
result. Establish if the solution satisfies the requirements.
Your company has an Azure Active Directory (Azure AD) subscription.
You want to implement an Azure AD conditional access policy.
The policy must be configured to require members of the Global Administrators group to use Multi-Factor Authentication and an
Azure AD-joined device when they connect to Azure AD from untrusted locations.
Solution: You access the multi-factor authentication page to alter the user settings.
Does the solution meet the goal?
 A. Yes
 B. No Voted
Solution: You access the Azure portal to alter the session control of the Azure AD conditional access policy.
 A. Yes
 B. No Most Voted
Solution: You access the Azure portal to alter the grant control of the Azure AD conditional access policy.
 A. Yes
 B. No
You are planning to deploy an Ubuntu Server virtual machine to your company's Azure subscription.
You are required to implement a custom deployment that includes adding a particular trusted root certification authority (CA).
Which of the following should you use to create the virtual machine?
 A. The New-AzureRmVm cmdlet.
 B. The New-AzVM cmdlet.
 C. The Create-AzVM cmdlet.
 D. The az vm create command.
Your company makes use of Multi-Factor Authentication for when users are not in the office. The Per Authentication option has
been configured as the usage model.
After the acquisition of a smaller business and the addition of the new staff to Azure Active Directory (Azure AD) obtains a different
company and adding the new employees to Azure Active Directory (Azure AD), you are informed that these employees should also
make use of Multi-Factor Authentication.
To achieve this, the Per Enabled User setting must be set for the usage model.
Solution: You reconfigure the existing usage model via the Azure portal.
 A. Yes
 B. No
Your company's Azure solution makes use of Multi-Factor Authentication for when users are not in the office. The Per Authentication
option has been configured as the usage model.
Solution: You reconfigure the existing usage model via the Azure CLI.
 A. Yes
 B. No
Your company's Azure solution makes use of Multi-Factor Authentication for when users are not in the office. The Per Authentication
option has been configured as the usage model.
Solution: You create a new Multi-Factor Authentication provider with a backup from the existing Multi-Factor Authentication provider
data.
 A. Yes
 B. No
Your company has an Azure Active Directory (Azure AD) tenant named weyland.com that is configured for hybrid coexistence with
the on-premises Active
Directory domain.
You have a server named DirSync1 that is configured as a DirSync server.
You create a new user account in the on-premise Active Directory. You now need to replicate the user information to Azure AD
immediately.
Solution: You run the Start-ADSyncSyncCycle -PolicyType Initial PowerShell cmdlet.
 A. Yes
 B. No
Directory domain.
immediately.
Solution: You use Active Directory Sites and Services to force replication of the Global Catalog on a domain controller.
 A. Yes
 B. No
Directory domain.
immediately.
Solution: You restart the NetLogon service on a domain controller.
 A. Yes
 B. No
Your company has a Microsoft Azure subscription.

The company has datacenters in Los Angeles and New York.
You are configuring the two datacenters as geo-clustered sites for site resiliency.
You need to recommend an Azure storage redundancy option.
You have the following data storage requirements:
✑ Data must be stored on multiple nodes.
✑ Data must be stored on nodes in separate geographic locations.
✑ Data can be read from the secondary location as well as from the primary location.
Which of the following Azure stored redundancy options should you recommend?
 A. Geo-redundant storage
 B. Read-only geo-redundant storage Most Voted
 C. Zone-redundant storage
 D. Locally redundant storage
Your company has an azure subscription that includes a storage account, a resource group, a blob container and a file share.
A colleague named Jon Ross makes use of a solitary Azure Resource Manager (ARM) template to deploy a virtual machine and an
additional Azure Storage account.
You want to review the ARM template that was used by Jon Ross.
Solution: You access the Virtual Machine blade.
 A. Yes
 B. No
Solution: You access the Resource Group blade.
 A. Yes
 B. No
Solution: You access the Container blade.
 A. Yes
 B. No
Your company has three virtual machines (VMs) that are included in an availability set.
You try to resize one of the VMs, which returns an allocation failure message.
It is imperative that the VM is resized.
Which of the following actions should you take?
 A. You should only stop one of the VMs.

 B. You should stop two of the VMs.
 C. You should stop all three VMs. Most Voted
 D. You should remove the necessary VM from the availability set.
You have an Azure virtual machine (VM) that has a single data disk. You have been tasked with attaching this data disk to another
Azure VM.
You need to make sure that your strategy allows for the virtual machines to be offline for the least amount of time possible.
Which of the following is the action you should take FIRST?
 A. Stop the VM that includes the data disk.

 B. Stop the VM that the data disk must be attached to.
 C. Detach the data disk. Most Voted
 D. Delete the VM that includes the data disk.
Your company has an Azure subscription.

You need to deploy a number of Azure virtual machines (VMs) using Azure Resource Manager (ARM) templates. You have been
informed that the VMs will be included in a single availability set.
You are required to make sure that the ARM template you configure allows for as many VMs as possible to remain accessible in the
event of fabric failure or maintenance.
Which of the following is the value that you should configure for the platformFaultDomainCount property?
 A. 10
 B. 30
 C. Min Value
 D. Max Value
Your company has an Azure subscription.

You need to deploy a number of Azure virtual machines (VMs) using Azure Resource Manager (ARM) templates. You have been
informed that the VMs will be included in a single availability set.
You are required to make sure that the ARM template you configure allows for as many VMs as possible to remain accessible in the
event of fabric failure or maintenance.
Which of the following is the value that you should configure for the platformUpdateDomainCount property?
 A. 10
 B. 20 Most Voted
 C. 30
 D. 40
 DRAG DROP -
You have downloaded an Azure Resource Manager (ARM) template to deploy numerous virtual machines (VMs). The
ARM template is based on a current VM, but must be adapted to reference an administrative password.
You need to make sure that the password cannot be stored in plain text.
You are preparing to create the necessary components to achieve your goal.
Which of the following should you create to achieve your goal? Answer by dragging the correct option from the list to the
answer area.
Select and Place:
 Hide Solution Discussion 21

 Correct
Answer:
You can use a template that allows you to deploy a simple Windows VM by retrieving the password that is stored in a Key
Vault. Therefore, the password is never put in plain text in the template parameter file.
Question #21Topic 1
Your company has an Azure Active Directory (Azure AD) tenant that is configured for hybrid coexistence with the on-premises
Active Directory domain.
The on-premise virtual environment consists of virtual machines (VMs) running on Windows Server 2012 R2 Hyper-V host servers.
You have created some PowerShell scripts to automate the configuration of newly created VMs. You plan to create several new
VMs.
You need a solution that ensures the scripts are run on the new VMs.
Which of the following is the best solution?
 A. Configure a SetupComplete.cmd batch file in the %windir%\setup\scripts directory.
 B. Configure a Group Policy Object (GPO) to run the scripts as logon scripts.
 C. Configure a Group Policy Object (GPO) to run the scripts as startup scripts.
 D. Place the scripts in a new virtual hard disk (VHD).
Hide Solution Discussion 19

Correct Answer: A �
After you deploy a Virtual Machine you typically need to make some changes before it‫ג‬€™s ready to use. This si something you can
do manually or you could use
Remote PowerShell to automate the configuration of your VM after deployment for example.
But now there‫ג‬€™s a third alternative available allowing you customize your VM: the CustomScriptextension.
This CustomScript extension is executed by the VM Agent and it‫ג‬€™s very straightforward: you specify which files it needs to
download from your storage account and which file it needs to execute. You can even specify arguments that need to be passed to
the script. The only requirement is that you execute a .ps1 file.
Reference:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-a-custom-script-to-windows-setup
https://azure.microsoft.com/en-us/blog/automating-vm-customization-tasks-using-custom-script-extension/
Community vote distribution
A (100%)
Question #22Topic 1
Your company has an Azure Active Directory (Azure AD) tenant that is configured for hybrid coexistence with the on-premises
Active Directory domain.
You plan to deploy several new virtual machines (VMs) in Azure. The VMs will have the same operating system and custom
software requirements.
You configure a reference VM in the on-premise virtual environment. You then generalize the VM to create an image.
You need to upload the image to Azure to ensure that it is available for selection when you create the new Azure VMs.
Which PowerShell cmdlets should you use?
 A. Add-AzVM
 B. Add-AzVhd Most Voted
 C. Add-AzImage
 D. Add-AzImageDataDisk

Correct Answer: B �
The Add-AzVhd cmdlet uploads on-premises virtual hard disks, in .vhd file format, to a blob storage account as fixed virtual hard
disks.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/upload-generalized-managed
B (100%)
Question #23Topic 1
DRAG DROP -
Your company has an Azure subscription that includes a number of Azure virtual machines (VMs), which are all part of the same
virtual network.
Your company also has an on-premises Hyper-V server that hosts a VM, named VM1, which must be replicated to Azure.
Which of the following objects that must be created to achieve this goal? Answer by dragging the correct option from the list to the
answer area.
Select and Place:

Correct
Answer:
Question #24Topic 1
Your company's Azure subscription includes two Azure networks named VirtualNetworkA and VirtualNetworkB.
VirtualNetworkA includes a VPN gateway that is configured to make use of static routing. Also, a site-to-site VPN connection exists
between your company's on- premises network and VirtualNetworkA.
You have configured a point-to-site VPN connection to VirtualNetworkA from a workstation running Windows 10. After configuring
virtual network peering between
VirtualNetworkA and VirtualNetworkB, you confirm that you are able to access VirtualNetworkB from the company's on-premises
network. However, you find that you cannot establish a connection to VirtualNetworkB from the Windows 10 workstation.
You have to make sure that a connection to VirtualNetworkB can be established from the Windows 10 workstation.
Solution: You choose the Allow gateway transit setting on VirtualNetworkA.
 A. Yes
 B. No

Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing
B (100%)
Question #25Topic 1
Solution: You choose the Allow gateway transit setting on VirtualNetworkB.
 A. Yes
 B. No

Reference:
Question #26Topic 1
Solution: You download and re-install the VPN client configuration package on the Windows 10 workstation.
 A. Yes
 B. No

Reference:
A (100%)
Question #27Topic 1
Your company has virtual machines (VMs) hosted in Microsoft Azure. The VMs are located in a single Azure virtual network named
VNet1.
The company has users that work remotely. The remote workers require access to the VMs on VNet1.
You need to provide access for the remote workers.
What should you do?
 A. Configure a Site-to-Site (S2S) VPN.

 B. Configure a VNet-toVNet VPN.
 C. Configure a Point-to-Site (P2S) VPN. Most Voted
 D. Configure DirectAccess on a Windows Server 2012 server VM.
 E. Configure a Multi-Site VPN

Correct Answer: C �
A Point-to-Site (P2S) VPN gateway connection lets you create a secure connection to your virtual network from an individual client
computer.
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways
C (91%)
9%
Question #28Topic 1
Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines (VMs).
You need to configure an Azure internal load balancer as a listener for the availability group.
Solution: You create an HTTP health probe on port 1433.
 A. Yes


B (100%)
Question #29Topic 1
Solution: You set Session persistence to Client IP.
 A. Yes
 B. No

Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/sql/virtual-machines-windows-portal-sql-alwayson-int-listener
Question #30Topic 1
Solution: You enable Floating IP.
 A. Yes
 B. No


A (100%)
Question #31Topic 1
Your company has two on-premises servers named SRV01 and SRV02. Developers have created an application that runs on
SRV01. The application calls a service on SRV02 by IP address.
You plan to migrate the application on Azure virtual machines (VMs). You have configured two VMs on a single subnet in an Azure
virtual network.
You need to configure the two VMs with static internal IP addresses.
What should you do?
 A. Run the New-AzureRMVMConfig PowerShell cmdlet.

 B. Run the Set-AzureSubnet PowerShell cmdlet.
 C. Modify the VM properties in the Azure Management Portal.
 D. Modify the IP properties in Windows Network and Sharing Center.
 E. Run the Set-AzureStaticVNetIP PowerShell cmdlet. Most Voted

Correct Answer: E �
Specify a static internal IP for a previously created VM
If you want to set a static IP address for a VM that you previously created, you can do so by using the following cmdlets. If you
already set an IP address for the
VM and you want to change it to a different IP address, you‫ג‬€™ll need to remove the existing static IP address before running these
cmdlets. See the instructions below to remove a static IP.
For this procedure, you‫ג‬€™ll use the Update-AzureVM cmdlet. The Update-AzureVM cmdlet restarts the VM as part of the update
process. The DIP that you specify will be assigned after the VM restarts. In this example, we set the IP address for VM2, which is
located in cloud service StaticDemo.
Get-AzureVM -ServiceName StaticDemo -Name VM2 | Set-AzureStaticVNetIP -IPAddress 192.168.4.7 | Update-AzureVM
E (71%)
C (29%)
Question #32Topic 1
You need to deploy five virtual machines (VMs) to your company's virtual network subnet.
The VMs will each have both a public and private IP address. Inbound and outbound security rules for all of these virtual machines
must be identical.
Which of the following is the least amount of network interfaces needed for this configuration?
 A. 5
 B. 10
 C. 20
 D. 40


A (100%)
Question #33Topic 1
You need to deploy five virtual machines (VMs) to your company's virtual network subnet.
The VMs will each have both a public and private IP address. Inbound and outbound security rules for all of these virtual machines
must be identical.
Which of the following is the least amount of security groups needed for this configuration?
 A. 4
 B. 3
 C. 2
 D. 1 Most Voted

Correct Answer: D �

D (100%)
Question #34Topic 1
Your company's Azure subscription includes Azure virtual machines (VMs) that run Windows Server 2016.
One of the VMs is backed up every day using Azure Backup Instant Restore.
When the VM becomes infected with data encrypting ransomware, you decide to recover the VM's files.
Which of the following is TRUE in this scenario?
 A. You can only recover the files to the infected VM.

 B. You can recover the files to any VM within the company‫ג‬€™s subscription. Most Voted
 C. You can only recover the files to a new VM.
 D. You will not be able to recover the files.


B (87%)
13%
Question #35Topic 1
Your company's Azure subscription includes Azure virtual machines (VMs) that run Windows Server 2016.
One of the VMs is backed up every day using Azure Backup Instant Restore.
When the VM becomes infected with data encrypting ransomware, you are required to restore the VM.
Which of the following actions should you take?
 A. You should restore the VM after deleting the infected VM.

 B. You should restore the VM to any VM within the company‫ג‬€™s subscription.
 C. You should restore the VM to a new Azure VM. Most Voted
 D. You should restore the VM to an on-premise Windows device.


C (94%)
6%
Question #36Topic 1
You administer a solution in Azure that is currently having performance issues.
You need to find the cause of the performance issues pertaining to metrics on the Azure infrastructure.
Which of the following is the tool you should use?
 A. Azure Traffic Analytics

 B. Azure Monitor Most Voted
 C. Azure Activity Log
 D. Azure Advisor

Metrics in Azure Monitor are stored in a time-series database which is optimized for analyzing time-stamped data. This makes
metrics particularly suited for alerting and fast detection of issues.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/data-platform
B (100%)
Question #37Topic 1
Your company has an Azure subscription that includes a Recovery Services vault.
You want to use Azure Backup to schedule a backup of your company's virtual machines (VMs) to the Recovery Services vault.
Which of the following VMs can you back up? Choose all that apply.
 A. VMs that run Windows 10.

 B. VMs that run Windows Server 2012 or higher.
 C. VMs that have NOT been shut down.
 D. VMs that run Debian 8.2+.
 E. VMs that have been shut down.

Correct Answer: ABCDE �
Azure Backup supports backup of 64-bit Windows server operating system from Windows Server 2008.
Azure Backup supports backup of 64-bit Windows 10 operating system.
Azure Backup supports backup of 64-bit Debian operating system from Debian 7.9+.
Azure Backup supports backup of VM that are shutdown or offline.
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-support-matrix-iaas https://docs.microsoft.com/en-us/azure/virtual-
machines/linux/endorsed-distros
ABCDE (67%)
ABD (33%)
Topic 2 - Question Set 2

Question #1Topic 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique
solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not
have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the
review screen.
You have an Azure subscription that contains the following users in an Azure Active Directory tenant named
contoso.onmicrosoft.com:
User1 creates a new Azure Active Directory tenant named external.contoso.onmicrosoft.com.

You need to create new user accounts in external.contoso.onmicrosoft.com.
Solution: You instruct User2 to create the user accounts.
Does that meet the goal?
 A. Yes

Only a global administrator can add users to this tenant.
Reference:
https://docs.microsoft.com/en-us/azure/devops/organizations/accounts/add-users-to-azure-ad
B (82%)
A (18%)
Question #2Topic 2
review screen.
 A. Yes

Reference:
B (91%)
9%
Question #3Topic 2
review screen.

 A. Yes

Reference:
B (89%)
11%
Question #4Topic 2
HOTSPOT -
You have an Azure subscription named Subscription1 that contains a resource group named RG1.
In RG1, you create an internal load balancer named LB1 and a public load balancer named LB2.
You need to ensure that an administrator named Admin1 can manage LB1 and LB2. The solution must follow the principle of least
privilege.
Which role should you assign to Admin1 for each task? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Correct
Answer:
The Network Contributor role lets you manage networks, but not access them.
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles
Question #5Topic 2
You have an Azure subscription that contains an Azure Active Directory (Azure AD) tenant named contoso.com and an Azure
Kubernetes Service (AKS) cluster named AKS1.
An administrator reports that she is unable to grant access to AKS1 to the users in contoso.com.
You need to ensure that access to AKS1 can be granted to the contoso.com users.
What should you do first?
 A. From contoso.com, modify the Organization relationships settings.

 B. From contoso.com, create an OAuth 2.0 authorization endpoint. Most Voted
 C. Recreate AKS1. Most Voted
 D. From AKS1, create a namespace.

Reference:
https://kubernetes.io/docs/reference/access-authn-authz/authentication/
B (61%)
C (35%)
4%
Question #6Topic 2
You have a Microsoft 365 tenant and an Azure Active Directory (Azure AD) tenant named contoso.com.
You plan to grant three users named User1, User2, and User3 access to a temporary Microsoft SharePoint document library named
Library1.
You need to create groups for the users. The solution must ensure that the groups are deleted automatically after 180 days.
Which two groups should you create? Each correct answer presents a complete solution.
 A. a Microsoft 365 group that uses the Assigned membership type

 B. a Security group that uses the Assigned membership type
 C. a Microsoft 365 group that uses the Dynamic User membership type
 D. a Security group that uses the Dynamic User membership type
 E. a Security group that uses the Dynamic Device membership type

Correct Answer: AC �
You can set expiration policy only for Office 365 groups in Azure Active Directory (Azure AD).
Note: With the increase in usage of Office 365 Groups, administrators and users need a way to clean up unused groups. Expiration
policies can help remove inactive groups from the system and make things cleaner.
When a group expires, all of its associated services (the mailbox, Planner, SharePoint site, etc.) are also deleted.
You can set up a rule for dynamic membership on security groups or Office 365 groups.
Incorrect Answers:
B, D, E: You can set expiration policy only for Office 365 groups in Azure Active Directory (Azure AD).
Reference:
https://docs.microsoft.com/en-us/office365/admin/create-groups/office-365-groups-expiration-policy?view=o365-worldwide
AC (100%)
Question #7Topic 2
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table:
User3 is the owner of Group1.

Group2 is a member of Group1.
You configure an access review named Review1 as shown in the following exhibit:
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:

Correct
Answer:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/governance/create-access-review
Question #8Topic 2
HOTSPOT -
You have the Azure management groups shown in the following table:
You add Azure subscriptions to the management groups as shown in the following table:
You create the Azure policies shown in the following table:
Hot Area:

Correct
Answer:
Box 1: No -
Virtual networks are not allowed at the root and is inherited. Deny overrides allowed.
Box 2: Yes -
Virtual Machines can be created on a Management Group provided the user has the required RBAC permissions.
Box 3: Yes -
Subscriptions can be moved between Management Groups provided the user has the required RBAC permissions.
Reference:
https://docs.microsoft.com/en-us/azure/governance/management-groups/overview https://docs.microsoft.com/en-
us/azure/governance/management-groups/manage#moving-management-groups-and-subscriptions
Question #9Topic 2
You have an Azure policy as shown in the following exhibit:
What is the effect of the policy?
 A. You are prevented from creating Azure SQL servers anywhere in Subscription 1.
 B. You can create Azure SQL servers in ContosoRG1 only. Most Voted
 C. You are prevented from creating Azure SQL Servers in ContosoRG1 only.
 D. You can create Azure SQL servers in any resource group within Subscription 1.
You are prevented from creating Azure SQL servers anywhere in Subscription 1 with the exception of ContosoRG1
B (100%)
Question #10Topic 2
HOTSPOT -
You have an Azure subscription that contains the resources shown in the following table:
You assign a policy to RG6 as shown in the following table:
To RG6, you apply the tag: RGroup: RG6.

You deploy a virtual network named VNET2 to RG6.
Which tags apply to VNET1 and VNET2? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
VNET1: Department: D1, and Label:Value1 only.

Tags applied to the resource group or subscription are not inherited by the resources.
Note: Azure Policy allows you to use either built-in or custom-defined policy definitions and assign them to either a specific resource
group or across a whole
Azure subscription.
VNET2: Label:Value1 only.
Incorrect Answers:
RGROUP: RG6 -
Tags applied to the resource group or subscription are not inherited by the resources.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/tag-policies
Question #11Topic 2
You have an Azure subscription named AZPT1 that contains the resources shown in the following table:
You create a new Azure subscription named AZPT2.

You need to identify which resources can be moved to AZPT2.
Which resources should you identify?
 A. VM1, storage1, VNET1, and VM1Managed only

 B. VM1 and VM1Managed only
 C. VM1, storage1, VNET1, VM1Managed, and RVAULT1
 D. RVAULT1 only

You can move a VM and its associated resources to a different subscription by using the Azure portal.
You can now move an Azure Recovery Service (ASR) Vault to either a new resource group within the current subscription or to a
new subscription.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/move-resource-group-and-subscription
C (100%)
Question #12Topic 2
You recently created a new Azure subscription that contains a user named Admin1.
Admin1 attempts to deploy an Azure Marketplace resource by using an Azure Resource Manager template. Admin1 deploys the
template by using Azure
PowerShell and receives the following error message: `User failed validation to purchase resources. Error message: `Legal terms
have not been accepted for this item on this subscription. To accept legal terms, please go to the Azure portal
(http://go.microsoft.com/fwlink/?LinkId=534873) and configure programmatic deployment for the Marketplace item or create it there
for the first time.`
You need to ensure that Admin1 can deploy the Marketplace resource successfully.
What should you do?
 A. From Azure PowerShell, run the Set-AzApiManagementSubscription cmdlet

 B. From the Azure portal, register the Microsoft.Marketplace resource provider
 C. From Azure PowerShell, run the Set-AzMarketplaceTerms cmdlet
 D. From the Azure portal, assign the Billing administrator role to Admin1

Reference:
https://docs.microsoft.com/en-us/powershell/module/az.marketplaceordering/set-azmarketplaceterms?view=azps-4.1.0
C (100%)
Question #13Topic 2
You have an Azure Active Directory (Azure AD) tenant that contains 5,000 user accounts.
You create a new user account named AdminUser1.
You need to assign the User administrator administrative role to AdminUser1.
What should you do from the user account properties?
 A. From the Licenses blade, assign a new license

 B. From the Directory role blade, modify the directory role
 C. From the Groups blade, invite the user account to a new group

Assign a role to a user -
1. Sign in to the Azure portal with an account that's a global admin or privileged role admin for the directory.
2. Select Azure Active Directory, select Users, and then select a specific user from the list.
3. For the selected user, select Directory role, select Add role, and then pick the appropriate admin roles from the Directory roles list,
such as Conditional access administrator.
4. Press Select to save.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-users-assign-role-azure-portal
B (100%)
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com that contains 100 user
accounts.
You purchase 10 Azure AD Premium P2 licenses for the tenant.
You need to ensure that 10 users can use all the Azure AD Premium features.
What should you do?
 A. From the Licenses blade of Azure AD, assign a license

 B. From the Groups blade of each user, invite the users to a group
 C. From the Azure AD domain, add an enterprise application
 D. From the Directory role blade of each user, modify the directory role

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/license-users-groups
A (100%)
Question #15Topic 2
You have an Azure subscription named Subscription1 and an on-premises deployment of Microsoft System
Center Service Manager.
Subscription1 contains a virtual machine named VM1.
You need to ensure that an alert is set in Service Manager when the amount of available memory on VM1 is
below 10 percent.
 A. Create an automation runbook

 B. Deploy a function app
 C. Deploy the IT Service Management Connector (ITSM)
 D. Create a notification
The IT Service Management Connector (ITSMC) allows you to connect Azure and a supported IT Service
Management (ITSM) product/service, such as the
Microsoft System Center Service Manager.
With ITSMC, you can create work items in ITSM tool, based on your Azure alerts (metric alerts, Activity Log
alerts and Log Analytics alerts).
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/itsmc-overview
C (100%)
Question #16Topic 2
You sign up for Azure Active Directory (Azure AD) Premium P2.
You need to add a user named [email protected] as an administrator on all the computers that will be
joined to the Azure AD domain.
What should you configure in Azure AD?
 A. Device settings from the Devices blade

 B. Providers from the MFA Server blade
 C. User settings from the Users blade
 D. General settings from the Groups blade

When you connect a Windows device with Azure AD using an Azure AD join, Azure AD adds the following
security principles to the local administrators group on the device:
✑ The Azure AD global administrator role
✑ The Azure AD device administrator role
✑ The user performing the Azure AD join
In the Azure portal, you can manage the device administrator role on the Devices page. To open the Devices
page:
1. Sign in to your Azure portal as a global administrator or device administrator.
2. On the left navbar, click Azure Active Directory.
3. In the Manage section, click Devices.
4. On the Devices page, click Device settings.
5. To modify the device administrator role, configure Additional local administrators on Azure AD joined
devices.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/devices/assign-local-admin
A (100%)
Question #17Topic 2
HOTSPOT -
You have Azure Active Directory tenant named Contoso.com that includes following users:
Contoso.com includes following Windows 10 devices:

You create following security groups in Contoso.com:
Hot Area:

Correct
Answer:
Box 1: Yes -
User1 is a Cloud Device Administrator.
Device2 is Azure AD joined.
Group1 has the assigned to join type. User1 is the owner of Group1.
Note: Assigned groups - Manually add users or devices into a static group.
Azure AD joined or hybrid Azure AD joined devices utilize an organizational account in Azure AD
Box 2: No -
User2 is a User Administrator.
Device1 is Azure AD registered.
Group1 has the assigned join type, and the owner is User1.
Note: Azure AD registered devices utilize an account managed by the end user, this account is either a
Microsoft account or another locally managed credential.
Box 3: Yes -
User2 is a User Administrator.
Device2 is Azure AD joined.
Group2 has the Dynamic Device join type, and the owner is User2.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/devices/overview
Question #18Topic 2
You have an Azure subscription that contains a resource group named RG26.
RG26 is set to the West Europe location and is used to create temporary resources for a project. RG26
contains the resources shown in the following table.
SQLDB01 is backed up to RGV1.

When the project is complete, you attempt to delete RG26 from the Azure portal. The deletion fails.
You need to delete RG26.
 A. Delete VM1
 B. Stop VM1
 C. Stop the backup of SQLDB01
 D. Delete sa001


C (100%)
Question #19Topic 2
You have an Azure subscription named Subscription1 that contains a virtual network named VNet1. VNet1 is in
a resource group named RG1.
Subscription1 has a user named User1. User1 has the following roles:
✑ Reader
✑ Security Admin
✑ Security Reader
You need to ensure that User1 can assign the Reader role for VNet1 to other users.
What should you do?
 A. Remove User1 from the Security Reader and Reader roles for Subscription1.
 B. Assign User1 the User Access Administrator role for VNet1. Most Voted
 C. Assign User1 the Network Contributor role for VNet1.
 D. Assign User1 the Network Contributor role for RG1.

Has full access to all resources including the right to delegate access to others.
Note:
There are several versions of this question in the exam. The question can have other incorrect answer options,
including the following:
1. Name Server (NS)
2. Assign User1 the Contributor role for VNet1.
3. Remove User1 from the Security Reader and Reader roles for Subscription1. Assign User1 the Contributor
role for Subscription1.
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/overview
B (100%)
Question #20Topic 2
You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?
 A. MX
 B. NSEC
 C. PTR
 D. RRSIG

To verify your custom domain name (example)
1. Sign in to the Azure portal using a Global administrator account for the directory.
2. Select Azure Active Directory, and then select Custom domain names.
3. On the Fabrikam - Custom domain names page, select the custom domain name, Contoso.
4. On the Contoso page, select Verify to make sure your custom domain is properly registered and is valid for
Azure AD. Use either the TXT or the MX record type.
Note:
There are several versions of this question in the exam. The question can have two correct answers:
1. MX
2. TXT
The question can also have other incorrect answer options, including the following:
1. SRV
2. NSEC3
Reference:
https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain
A (100%)
Question #21Topic 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series
contains a unique solution that might meet the stated goals. Some question sets might have more than one
correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will
not appear in the review screen.
You have an Azure Directory (Azure AD) tenant named Adatum and an Azure Subscription named
Subscription1. Adatum contains a group named Developers.
Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Subscription1, you assign the DevTest Labs User role to the Developers group.
Does this meet the goal?
 A. Yes
 B. No

DevTest Labs User role only lets you connect, start, restart, and shutdown virtual machines in your Azure
DevTest Labs.
The Logic App Contributor role lets you manage logic app, but not access to them. It provides access to view,
edit, and update a logic app.
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-
us/azure/logic-apps/logic-apps-securing-a-logic-app
B (100%)
Question #22Topic 2
Solution: On Subscription1, you assign the Logic App Operator role to the Developers group.
 A. Yes
 B. No

You would need the Logic App Contributor role.
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-
us/azure/logic-apps/logic-apps-securing-a-logic-app
Question #23Topic 2
Solution: On Dev, you assign the Contributor role to the Developers group.
 A. Yes
 B. No

The Contributor role can manage all resources (and add resources) in a Resource Group.
Question #24Topic 2
DRAG DROP -
You have an Azure subscription that is used by four departments in your company. The subscription contains 10 resource groups.
Each department uses resources in several resource groups.
You need to send a report to the finance department. The report must detail the costs for each department.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the
answer area and arrange them in the correct order.
Select and Place:

Correct
Answer:
Box 1: Assign a tag to each resource.
You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy. After you apply tags, you can
retrieve all the resources in your subscription with that tag name and value. Each resource or resource group can have a maximum
of 15 tag name/value pairs. Tags applied to the resource group are not inherited by the resources in that resource group.
Box 2: From the Cost analysis blade, filter the view by tag
After you get your services running, regularly check how much they're costing you. You can see the current spend and burn rate in
Azure portal.
1. Visit the Subscriptions blade in Azure portal and select a subscription.
You should see the cost breakdown and burn rate in the popup blade.
2. Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after you add a service for the data
to populate.
3. You can filter by different properties like tags, resource group, and timespan. Click Apply to confirm the filters and Download if
you want to export the view to a
Comma-Separated Values (.csv) file.
Box 3: Download the usage report
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags https://docs.microsoft.com/en-
us/azure/billing/billing-getting-started
Question #25Topic 2
You have an Azure subscription named Subscription1 that contains an Azure Log Analytics workspace named Workspace1.
You need to view the error events from a table named Event.
Which query should you run in Workspace1?
 A. Get-Event Event | where {$_.EventType == "error"}

 B. search in (Event) "error"
 C. select * from Event where EventType == "error"
 D. search in (Event) * | where EventType -eq "error"

To search a term in a specific table, add the table-name just after the search operator
Note:
There are several versions of this question in the exam. The question has two possible correct answers:
1. Event | search "error"
2. Event | where EventType == "error"
3. search in (Event) "error"
Other incorrect answer options you may see on the exam include the following:
1. Get-Event Event | where {$_.EventTye ‫ג‬€"eq "error"}
2. Event | where EventType is "error"
3. search in (Event) * | where EventType ‫ג‬€"eq "error"
4. select * from Event where EventType is "error"
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/search-queries https://docs.microsoft.com/en-us/azure/azure-
monitor/log-query/get-started-portal https://docs.microsoft.com/en-us/azure/data-
explorer/kusto/query/searchoperator?pivots=azuredataexplorer
B (100%)
Question #26Topic 2
HOTSPOT -
You have an Azure subscription that contains a virtual network named VNET1 in the East US 2 region. A network interface named
VM1-NI is connected to VNET1.
You successfully deploy the following Azure Resource Manager template.
Hot Area:

Correct
Answer:
Box 1: Yes -
Box 2: Yes -
VM1 is in Zone1, while VM2 is on Zone2.
Box 3: No -
Reference:
https://docs.microsoft.com/en-us/azure/architecture/resiliency/recovery-loss-azure-region
Question #27Topic 2
You have an Azure subscription named Subscription1. Subscription1 contains the resource groups in the following table.
RG1 has a web app named WebApp1. WebApp1 is located in West Europe.
You move WebApp1 to RG2.
What is the effect of the move?
 A. The App Service plan for WebApp1 remains in West Europe. Policy2 applies to WebApp1.
 B. The App Service plan for WebApp1 moves to North Europe. Policy2 applies to WebApp1.
 C. The App Service plan for WebApp1 remains in West Europe. Policy1 applies to WebApp1.
 D. The App Service plan for WebApp1 moves to North Europe. Policy1 applies to WebApp1.

You can move an app to another App Service plan, as long as the source plan and the target plan are in the same resource group
and geographical region.
The region in which your app runs is the region of the App Service plan it's in. However, you cannot change an App Service plan's
region.
Reference:
https://docs.microsoft.com/en-us/azure/app-service/app-service-plan-manage
A (80%)
C (20%)
Question #28Topic 2
HOTSPOT -
You have an Azure subscription named Subscription1 that has a subscription ID of c276fc76-9cd4-44c9-99a7-4fd71546436e.
You need to create a custom RBAC role named CR1 that meets the following requirements:
✑ Can be assigned only to the resource groups in Subscription1
✑ Prevents the management of the access permissions for the resource groups
✑ Allows the viewing, creating, modifying, and deleting of resources within the resource groups
What should you specify in the assignable scopes and the permission elements of the definition of CR1? To answer, select the
appropriate options in the answer area.
Hot Area:

Correct
Answer:
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/custom-roles https://docs.microsoft.com/en-us/azure/role-based-
access-control/resource-provider-operations#microsoftresources
Question #29Topic 2
You have an Azure subscription.
Users access the resources in the subscription from either home or from customer sites. From home, users must establish a point-
to-site VPN to access the Azure resources. The users on the customer sites access the Azure resources by using site-to-site VPNs.
You have a line-of-business-app named App1 that runs on several Azure virtual machine. The virtual machines run Windows Server
2016.
You need to ensure that the connections to App1 are spread across all the virtual machines.
What are two possible Azure services that you can use? Each correct answer presents a complete solution.
 A. an internal load balancer Most Voted
 B. a public load balancer
 C. an Azure Content Delivery Network (CDN)
 D. Traffic Manager
 E. an Azure Application Gateway Most Voted

Correct Answer: AE �
Network traffic from the VPN gateway is routed to the cloud application through an internal load balancer. The load balancer is
located in the front-end subnet of the application.
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/vpn https://docs.microsoft.com/en-
us/azure/load-balancer/load-balancer-overview https://docs.microsoft.com/en-us/azure/application-gateway/overview
AE (100%)
Question #30Topic 2
You have 100 Azure virtual machines.
You need to quickly identify underutilized virtual machines that can have their service tier changed to a less expensive offering.
Which blade should you use?
 A. Monitor
 B. Advisor
 C. Metrics
 D. Customer insights

Advisor helps you optimize and reduce your overall Azure spend by identifying idle and underutilized resources. You can get cost
recommendations from the Cost tab on the Advisor dashboard.
Reference:
https://docs.microsoft.com/en-us/azure/advisor/advisor-cost-recommendations
B (100%)
Question #31Topic 2
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant.
You need to create a conditional access policy that requires all users to use multi-factor authentication when they access the Azure
portal.
Which three settings should you configure? To answer, select the appropriate settings in the answer area.
Hot Area:

Correct Answer:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/app-based-mfa
Question #32Topic 2
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
The User administrator role is assigned to a user named Admin1.
An external partner has a Microsoft account that uses the [email protected] sign in.
Admin1 attempts to invite the external partner to sign in to the Azure AD tenant and receives the following error message: `Unable
to invite user [email protected] `" Generic authorization exception.`
You need to ensure that Admin1 can invite the external partner to sign in to the Azure AD tenant.
What should you do?
 A. From the Users settings blade, modify the External collaboration settings.
 B. From the Custom domain names blade, add a custom domain.
 C. From the Organizational relationships blade, add an identity provider.
 D. From the Roles and administrators blade, assign the Security administrator role to Admin1.

Reference:
https://techcommunity.microsoft.com/t5/Azure-Active-Directory/Generic-authorization-exception-inviting-Azure-AD-gests/td-
p/274742
Question #33Topic 2
You have an Azure subscription linked to an Azure Active Directory tenant. The tenant includes a user account named User1.
You need to ensure that User1 can assign a policy to the tenant root management group.
What should you do?
 A. Assign the Owner role for the Azure Subscription to User1, and then modify the default conditional access policies.
 B. Assign the Owner role for the Azure subscription to User1, and then instruct User1 to configure access management for Azure
resources.
 C. Assign the Global administrator role to User1, and then instruct User1 to configure access management for Azure resources. Most
Voted
 D. Create a new management group and delegate User1 as the owner of the new management group.

The following chart shows the list of roles and the supported actions on management groups.
Note:
Each directory is given a single top-level management group called the "Root" management group. This root management group is
built into the hierarchy to have all management groups and subscriptions fold up to it. This root management group allows for global
policies and Azure role assignments to be applied at the directory level. The Azure AD Global Administrator needs to elevate
themselves to the User Access Administrator role of this root group initially. After elevating access, the administrator can assign any
Azure role to other directory users or groups to manage the hierarchy. As administrator, you can assign your own account as owner
of the root management group.
Reference:
https://docs.microsoft.com/en-us/azure/governance/management-groups/overview
C (93%)
7%
The questions for AZ-104 were last updated at March 21, 2022.
 Viewing page 8 out of 34 pages.

 Viewing questions 71-80 out of 341 questions
Custom View Settings

Question #34Topic 2
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant named adatum.com. Adatum.com contains the groups in the following table.
You create two user accounts that are configured as shown in the following table.
Of which groups are User1 and User2 members? To answer, select the appropriate options in the answer area.
Hot Area:

Correct Answer:
Box 1: Group 1 only -
First rule applies -
Box 2: Group1 and Group2 only -
Both membership rules apply.
Reference:
https://docs.microsoft.com/en-us/sccm/core/clients/manage/collections/create-
collections
Question #35Topic 2
HOTSPOT -
You have a hybrid deployment of Azure Active Directory (Azure AD) that contains the users shown in the following table.
You need to modify the JobTitle and UsageLocation attributes for the users.
For which users can you modify the attributes from Azure AD? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
Box 1: User1 and User3 only -
You must use Windows Server Active Directory to update the identity, contact info, or
job info for users whose source of authority is Windows Server Active
Directory.
Box 2: User1, User2, and User3 -
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-
users-profile-azure-portal
Question #36Topic 2
review screen.
You need to ensure that an Azure Active Directory (Azure AD) user named Admin1 is assigned the required role to enable Traffic
Analytics for an Azure subscription.
Solution: You assign the Network Contributor role at the subscription level to Admin1.
 A. Yes
 B. No
Your account must meet one of the following to enable traffic analytics:
Your account must have any one of the following Azure roles at the subscription scope:
owner, contributor, reader, or network contributor.
Reference:
https://docs.microsoft.com/en-us/azure/network-watcher/traffic-analytics-faq
A (100%)
Question #37Topic 2
review screen.
Solution: You assign the Owner role at the subscription level to Admin1.
 A. Yes
 B. No

Reference:
A (100%)
Question #38Topic 2
review screen.
Solution: You assign the Reader role at the subscription level to Admin1.
 A. Yes
Reference:
B (86%)
14%
Question #39Topic 2
You have an Azure subscription that contains a user named User1.

You need to ensure that User1 can deploy virtual machines and manage virtual networks. The solution must use the principle of
least privilege.
Which role-based access control (RBAC) role should you assign to User1?
 A. Owner
 B. Virtual Machine Contributor
 C. Contributor Most Voted
 D. Virtual Machine Administrator Login

Virtual Machine Contributor: Lets you manage virtual machines, but not access to them,
and not the virtual network or storage account they're connected to.
Incorrect Answers:
A: Owner: Grants full access to manage all resources, including the ability to assign
roles in Azure RBAC.
C: Contributor: Grants full access to manage all resources, but does not allow you to
assign roles in Azure RBAC.
D: Virtual Machine Administrator Login: View Virtual Machines in the portal and login as
administrator.
Reference:
C (95%)
5%
Question #40Topic 2
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant that contains three global administrators named Admin1, Admin2, and
Admin3.
The tenant is associated to an Azure subscription. Access control for the subscription is configured as shown in the Access control
exhibit. (Click the Access
Control tab.)
You sign in to the Azure portal as Admin1 and configure the tenant as shown in the Tenant exhibit. (Click the Tenant tab.)
Hot Area:
Correct
Answer:
Box 1: No -
Only Admin3, the owner, can assign ownership.
Box 2: Yes -
Box 3: No -
Reference:
https://docs.microsoft.com/en-us/azure/cost-management-billing/manage/add-change-
subscription-administrator
Question #41Topic 2
You have an Azure subscription named Subscription1 that contains an Azure virtual machine named VM1. VM1 is in a resource
group named RG1.
VM1 runs services that will be used to deploy resources to RG1.
You need to ensure that a service running on VM1 can manage the resources in RG1 by using the identity of VM1.
 A. From the Azure portal, modify the Managed Identity settings of VM1 Most Voted
 B. From the Azure portal, modify the Access control (IAM) settings of RG1 Most Voted
 C. From the Azure portal, modify the Access control (IAM) settings of VM1
 D. From the Azure portal, modify the Policies settings of RG1
Managed identities for Azure resources provides Azure services with an automatically
managed identity in Azure Active Directory. You can use this identity to authenticate to
any service that supports Azure AD authentication, without having credentials in your
code.
You can enable and disable the system-assigned managed identity for VM using the
Azure portal.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/managed-identities-azure-
resources/qs-configure-portal-windows-vm
A (64%)
B (36%)
Question #42Topic 2
You have an Azure subscription that contains a resource group named TestRG.
You use TestRG to validate an Azure deployment.
TestRG contains the following resources:
You need to delete TestRG.

 A. Modify the backup configurations of VM1 and modify the resource lock type of VNET1
 B. Remove the resource lock from VNET1 and delete all data in Vault1 Most Voted
 C. Turn off VM1 and remove the resource lock from VNET1
 D. Turn off VM1 and delete all data in Vault1
When you delete a resource group, all of its resources are also deleted. Deleting a
resource group deletes all of its template deployments and currently stored operations.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/delete-
resource-group?tabs=azure-powershell
B (71%)
C (21%)
7%
Question #43Topic 2
You have an Azure DNS zone named adatum.com.

You need to delegate a subdomain named research.adatum.com to a different DNS server in Azure.
What should you do?
 A. Create an NS record named research in the adatum.com zone.

 B. Create a PTR record named research in the adatum.com zone.
 C. Modify the SOA record of adatum.com.
 D. Create an A record named *.research in the adatum.com zone.

You need to create a name server (NS) record for the zone.
Reference:
https://docs.microsoft.com/en-us/azure/dns/delegate-subdomain
A (100%)
Question #44Topic 2
DRAG DROP -
You have an Azure Active Directory (Azure AD) tenant that has the contoso.onmicrosoft.com domain name.
You have a domain name of contoso.com registered at a third-party registrar.
You need to ensure that you can create Azure AD users that have names containing a suffix of @contoso.com.
Select and Place:
Correct
Answer:
1. Add the custom domain name to your directory

2. Add a DNS entry for the domain name at the domain name registrar
3. Verify the custom domain name in Azure AD
Reference:
https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain
Question #45Topic 2
You have an Azure subscription named Subscription1 that contains an Azure Log Analytics workspace named Workspace1.
You need to view the error events from a table named Event.
Which query should you run in Workspace1?
 A. Get-Event Event | where {$_.EventType == "error"}

 B. Event | search "error"
 C. select * from Event where EventType == "error"
 D. Event | where EventType is "error"

The search operator provides a multi-table/multi-column search experience.
The syntax is:
Table_name | search "search term"
Note:
There are several versions of this question in the exam. The question has three possible correct answers:
1. search in (Event) "error"
2. Event | search "error"
3. Event | where EventType == "error"
Other incorrect answer options you may see on the exam include the following:
1. Get-Event Event | where {$_.EventTye ‫ג‬€"eq "error"}
2. Event | where EventType is "error"
3. select * from Event where EventType is "error"
4. search in (Event) * | where EventType ‫ג‬€"eq "error"
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/search-queries https://docs.microsoft.com/en-us/azure/azure-
monitor/log-query/get-started-portal https://docs.microsoft.com/en-us/azure/data-
explorer/kusto/query/searchoperator?pivots=azuredataexplorer
Question #46Topic 2
You have a registered DNS domain named contoso.com.
You create a public Azure DNS zone named contoso.com.
You need to ensure that records created in the contoso.com zone are resolvable from the internet.
What should you do?
 A. Create NS records in contoso.com.

 B. Modify the SOA record in the DNS domain registrar.
 C. Create the SOA record in contoso.com.
 D. Modify the NS records in the DNS domain registrar.

Reference:
https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns
D (100%)
Question #47Topic 2
HOTSPOT -
You have an Azure subscription that contains a storage account named storage1. The subscription is linked to an Azure Active
Directory (Azure AD) tenant named contoso.com that syncs to an on-premises Active Directory domain.
The domain contains the security principals shown in the following table.
In Azure AD, you create a user named User2.

The storage1 account contains a file share named share1 and has the following configurations.
Hot Area:

Correct
Answer:
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-files-identity-ad-ds-assign-permissions?tabs=azure-portal
Question #48Topic 2
HOTSPOT -
You have an Azure subscription named Subscription1 that contains a virtual network VNet1.
You add the users in the following table.
Which user can perform each configuration? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Box 1: User1 and User3 only.

User1: The Owner Role lets you manage everything, including access to resources.
User3: The Network Contributor role lets you manage networks, including creating subnets.
Box 2: User1 only.
The Security Admin role: In Security Center only: Can view security policies, view security states, edit security policies, view alerts
and recommendations, dismiss alerts and recommendations.
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-us/azure/role-based-
access-control/resource-provider-operations#microsoftnetwork
Question #49Topic 2
HOTSPOT -
You have the Azure resources shown on the following exhibit.
You plan to track resource usage and prevent the deletion of resources.
To which resources can you apply locks and tags? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Box 1: Sub1, RG1, and VM1 only -
You can lock a subscription, resource group, or resource to prevent other users in your organization from accidentally deleting or
modifying critical resources.
Box 2: Sub1, RG1, and VM1 only -

You apply tags to your Azure resources, resource groups, and subscriptions.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/lock-resources?tabs=json
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/tag-resources?tabs=json
Question #50Topic 2
You have an Azure Active Directory (Azure AD) tenant.
You plan to delete multiple users by using Bulk delete in the Azure Active Directory admin center.
You need to create and upload a file for the bulk delete.
Which user attributes should you include in the file?
 A. The user principal name and usage location of each user only
 B. The user principal name of each user only Most Voted
 C. The display name of each user only
 D. The display name and usage location of each user only
 E. The display name and user principal name of each user only

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/enterprise-users/users-bulk-delete
B (100%)
Question #51Topic 2
HOTSPOT -
You have an Azure subscription named Sub1 that contains the Azure resources shown in the following table.
You assign an Azure policy that has the following settings:

✑ Scope: Sub1
✑ Exclusions: Sub1/RG1/VNET1
✑ Policy definition: Append a tag and its value to resources
✑ Policy enforcement: Enabled
✑ Tag name: Tag4
✑ Tag value: value4
You assign tags to the resources as shown in the following table.
Hot Area:

Correct
Answer:
Box 1: No -
The Azure Policy will add Tag4 to RG1.
Box 2: No -
Tags applied to the resource group or subscription aren't inherited by the resources although you can enable inheritance with Azure
Policy. Storage1 has Tag3:
Value1 and the Azure Policy will add Tag4.
Box 3: No -
Tags applied to the resource group or subscription aren't inherited by the resources so VNET1 does not have Tag2.
VNET1 has Tag3:value2. VNET1 is excluded from the Azure Policy so Tag4 will not be added to VNET1.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/tag-resources?tabs=json
Question #52Topic 2
review screen.
Solution: You assign the Traffic Manager Contributor role at the subscription level to Admin1.
 A. Yes
 B. No

Reference:
B (100%)
Question #53Topic 2
You have three offices and an Azure subscription that contains an Azure Active Directory (Azure AD) tenant.
You need to grant user management permissions to a local administrator in each office.
What should you use?
 A. Azure AD roles
 B. administrative units
 C. access packages in Azure AD entitlement management
 D. Azure roles

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/roles/administrative-units
Question #54Topic 2
review screen.
You have an Azure Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains
a group named Developers.
Solution: On Dev, you assign the Logic App Contributor role to the Developers group.
 A. Yes Most Voted

 B. No

Reference:
A (56%)
B (38%)
6%

Question #1Topic 3
You have an Azure Storage account named storage1 that contains a blob container named container1.
You need to prevent new content added to container1 from being modified for one year.
What should you configure?
 A. the access tier

 B. an access policy
 C. the Access control (IAM) settings
 D. the access level

Reference:
https://docs.microsoft.com/en-us/azure/storage/blobs/immutable-storage-overview?tabs=azure-portal
B (100%)
Question #2Topic 3
HOTSPOT -
You have an Azure Storage account named storage1 that contains a blob container. The blob container has a default access tier of
Hot. Storage1 contains a container named conainer1.
You create lifecycle management rules in storage1 as shown in the following table.
You perform the actions shown in the following table.
Hot Area:

Correct
Answer:
Question #3Topic 3
You have an on-premises server that contains a folder named D:\Folder1.
You need to copy the contents of D:\Folder1 to the public container in an Azure Storage account named contosodata.
Which command should you run?
 A. https://contosodata.blob.core.windows.net/public
 B. azcopy sync D:\folder1 https://contosodata.blob.core.windows.net/public --snapshot
 C. azcopy copy D:\folder1 https://contosodata.blob.core.windows.net/public --recursive
 D. az storage blob copy start-batch D:\Folder1 https://contosodata.blob.core.windows.net/public

The azcopy copy command copies a directory (and all of the files in that directory) to a blob container. The result is a directory in the
container by the same name.
Incorrect Answers:
B: The azcopy sync command replicates the source location to the destination location. However, the file is skipped if the last
modified time in the destination is more recent.
D: The az storage blob copy start-batch command copies multiple blobs to a blob container.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-use-azcopy-blobs https://docs.microsoft.com/en-
us/azure/storage/common/storage-ref-azcopy-copy
C (100%)
Question #4Topic 3
In the Azure portal, you plan to create a storage account named storage1 that will have the following settings:
✑ Performance: Standard
✑ Replication: Zone-redundant storage (ZRS)
✑ Access tier (default): Cool
✑ Hierarchical namespace: Disabled
You need to ensure that you can set Account kind for storage1 to BlockBlobStorage.
Which setting should you modify first?
 A. Performance
 B. Replication
 C. Access tier (default)
 D. Hierarchical namespace

Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-account-overview https://docs.microsoft.com/en-
us/azure/storage/blobs/storage-blob-performance-tiers
A (100%)
Question #5Topic 3
You have an Azure subscription named Subscription1 that contains the storage accounts shown in the following table:
You plan to use the Azure Import/Export service to export data from Subscription1.
You need to identify which storage account can be used to export the data.
What should you identify?
 A. storage1
 B. storage2
 C. storage3
 D. storage4

Azure Import/Export service supports the following of storage accounts:
✑ Standard General Purpose v2 storage accounts (recommended for most scenarios)
✑ Blob Storage accounts
✑ General Purpose v1 storage accounts (both Classic or Azure Resource Manager deployments),
Azure Import/Export service supports the following storage types:
✑ Import supports Azure Blob storage and Azure File storage
✑ Export supports Azure Blob storage
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-requirements
D (100%)
Question #6Topic 3
HOTSPOT -
You have Azure Storage accounts as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the
graphic.
Hot Area:

Correct
Answer:
Box 1: storageaccount1 and storageaccount2 only
Box 2: All the storage accounts -

Note: The three different storage account options are: General-purpose v2 (GPv2) accounts, General-purpose v1 (GPv1) accounts,
and Blob storage accounts.
✑ General-purpose v2 (GPv2) accounts are storage accounts that support all of the latest features for blobs, files, queues, and
tables.
✑ Blob storage accounts support all the same block blob features as GPv2, but are limited to supporting only block blobs.
✑ General-purpose v1 (GPv1) accounts provide access to all Azure Storage services, but may not have the latest features or the
lowest per gigabyte pricing.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-account-options
Question #7Topic 3
You have Azure subscription that includes data in following locations:
You plan to export data by using Azure import/export job named Export1.
You need to identify the data that can be exported by using Export1.
Which data should you identify?
 A. DB1
 B. container1 Most Voted
 C. share1
 D. Table1

B (100%)
Question #8Topic 3
HOTSPOT -
You have an Azure Storage account named storage1.
You have an Azure App Service app named App1 and an app named App2 that runs in an Azure container instance. Each app uses
a managed identity.
You need to ensure that App1 and App2 can read blobs from storage1. The solution must meet the following requirements:
✑ Minimize the number of secrets used.
Ensure that App2 can only read from storage1 for the next 30 days.
What should you configure in storage1 for each app? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
App1: Access keys -
App2: Shared access signature (SAS)
A shared access signature (SAS) provides secure delegated access to resources in your storage account without compromising the
security of your data. With a
SAS, you have granular control over how a client can access your data. You can control what resources the client may access, what
permissions they have on those resources, and how long the SAS is valid, among other parameters.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-sas-overview
Question #9Topic 3
HOTSPOT -
You need to create an Azure Storage account that meets the following requirements:
✑ Minimizes costs
✑ Supports hot, cool, and archive blob tiers
✑ Provides fault tolerance if a disaster affects the Azure region where the account resides
How should you complete the command? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Box 1: StorageV2 -
You may only tier your object storage data to hot, cool, or archive in Blob storage and General Purpose v2 (GPv2) accounts.
General Purpose v1 (GPv1) accounts do not support tiering.
General-purpose v2 accounts deliver the lowest per-gigabyte capacity prices for Azure Storage, as well as industry-competitive
transaction prices.
Box 2: Standard_GRS -
Geo-redundant storage (GRS): Cross-regional replication to protect against region-wide unavailability.
Incorrect Answers:
Locally-redundant storage (LRS): A simple, low-cost replication strategy. Data is replicated within a single storage scale unit.
Read-access geo-redundant storage (RA-GRS): Cross-regional replication with read access to the replica. RA-GRS provides read-
only access to the data in the secondary location, in addition to geo-replication across two regions, but is more expensive compared
to GRS.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-grs https://docs.microsoft.com/en-
us/azure/storage/blobs/storage-blob-storage-tiers
Question #10Topic 3
You have an Azure subscription that contains the resources in the following table.
Store1 contains a file share named data. Data contains 5,000 files.
You need to synchronize the files in the file share named data to an on-premises server named Server1.
Which three actions should you perform? Each correct answer presents part of the solution.
 A. Create a container instance

 B. Register Server1
 C. Install the Azure File Sync agent on Server1
 D. Download an automation script
 E. Create a sync group

Correct Answer: BCE �
Step 1 (C): Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced with an Azure file share
Step 2 (B): Register Server1.
Register Windows Server with Storage Sync Service
Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server (or cluster) and
the Storage Sync Service.
Step 3 (E): Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in sync with each other. A sync
group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints. A server endpoint
represents a path on registered server.
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide
BCE (100%)
Question #11Topic 3
HOTSPOT -
You have an Azure subscription that contains the resources shown in the following table.
The status of VM1 is Running.

You assign an Azure policy as shown in the exhibit. (Click the Exhibit tab.)
You assign the policy by using the following parameters:
Microsoft.ClassicNetwork/virtualNetworks
Microsoft.Network/virtualNetworks
Microsoft.Compute/virtualMachines
Hot Area:

Correct
Answer:
Question #12Topic 3
DRAG DROP -
You have an Azure subscription that contains a storage account.
You have an on-premises server named Server1 that runs Windows Server 2016. Server1 has 2 TB of data.
You need to transfer the data to the storage account by using the Azure Import/Export service.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange
them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:

Correct
Answer:
At a high level, an import job involves the following steps:

Step 1: Attach an external disk to Server1 and then run waimportexport.exe
Determine data to be imported, number of drives you need, destination blob location for your data in Azure storage.
Use the WAImportExport tool to copy data to disk drives. Encrypt the disk drives with BitLocker.
Step 2: From the Azure portal, create an import job.
Create an import job in your target storage account in Azure portal. Upload the drive journal files.
Step 3: Detach the external disks from Server1 and ship the disks to an Azure data center.
Provide the return address and carrier account number for shipping the drives back to you.
Ship the disk drives to the shipping address provided during job creation.
Step 4: From the Azure portal, update the import job
Update the delivery tracking number in the import job details and submit the import job.
The drives are received and processed at the Azure data center.
The drives are shipped using your carrier account to the return address provided in the import job.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service
Question #13Topic 3
HOTSPOT -
You have Azure subscription that includes following Azure file shares:
You have the following on-premises servers:
You create a Storage Sync Service named Sync1 and an Azure File Sync group named Group1. Group1 uses share1 as a cloud
endpoint.
You register Server1 and Server2 in Sync1. You add D:\Folder1 on Server1 as a server endpoint of Group1.
Hot Area:

Correct
Answer:
Box 1: No -
Group1 already has a cloud endpoint named Share1.
A sync group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints.
Box 2: Yes -
Yes, one or more server endpoints can be added to the sync group.
Box 3: Yes -
Yes, one or more server endpoints can be added to the sync group.
Reference:
Question #14Topic 3
DRAG DROP -
You have an Azure subscription named Subscription1.
You create an Azure Storage account named contosostorage, and then you create a file share named data.
Which UNC path should you include in a script that references files from the data file share? To answer, drag the appropriate values
to the correct targets. Each value may be used once, more than once or not at all. You may need to drag the split bar between
panes or scroll to view content.
Select and Place:

Correct
Answer:
Box 1: contosostorage -
The name of account -
Box 2: file.core.windows.net -
Box 3: data -
The name of the file share is data.
Example:
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
Question #15Topic 3
HOTSPOT -
You have an Azure subscription that contains an Azure Storage account.
You plan to copy an on-premises virtual machine image to a container named vmimages.
You need to create the container for the planned image.
Which command should you run? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Question #16Topic 3
HOTSPOT -
You have an Azure File sync group that has the endpoints shown in the following table.
Cloud tiering is enabled for Endpoint3.

You add a file named File1 to Endpoint1 and a file named File2 to Endpoint2.
On which endpoints will File1 and File2 be available within 24 hours of adding the files? To answer, select the appropriate options in
the answer area.
Hot Area:

Correct
Answer:
File1: Endpoint3 only -
Cloud Tiering: A switch to enable or disable cloud tiering. When enabled, cloud tiering will tier files to your Azure file shares. This
converts on-premises file shares into a cache, rather than a complete copy of the dataset, to help you manage space efficiency on
your server. With cloud tiering, infrequently used or accessed files can be tiered to Azure Files.
File2: Endpoint1, Endpoint2, and Endpoint3
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-cloud-tiering
Question #17Topic 3
HOTSPOT -
You have several Azure virtual machines on a virtual network named VNet1.
You configure an Azure Storage account as shown in the following exhibit.
graphic.
Hot Area:

Correct
Answer:
Box 1: never -
The 10.2.9.0/24 subnet is not whitelisted.
Box 2: never -
After you configure firewall and virtual network settings for your storage account, select Allow trusted Microsoft services to access
this storage account as an exception to enable Azure Backup service to access the network restricted storage account.
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows https://azure.microsoft.com/en-us/blog/azure-
backup-now-supports-storage-accounts-secured-with-azure-storage-firewalls-and-virtual-networks/
Question #18Topic 3
HOTSPOT -
You have a sync group named Sync1 that has a cloud endpoint. The cloud endpoint includes a file named File1.txt.
Your on-premises network contains servers that run Windows Server 2016. The servers are configured as shown in the following
table.
You add Share1 as an endpoint for Sync1. One hour later, you add Share2 as an endpoint for Sync1.
Hot Area:

Correct
Answer:
Box 1: Yes -
If you add an Azure file share that has an existing set of files as a cloud endpoint to a sync group, the existing files are merged with
any other files that are already on other endpoints in the sync group.
Box 2: No -
Box 3: Yes -
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-planning
Question #19Topic 3
You have an Azure subscription that contains the storage accounts shown in the following table.
You need to identify which storage account can be converted to zone-redundant storage (ZRS) replication by requesting a live
migration from Azure support.
 A. storage1
 B. storage2
 C. storage3
 D. storage4

ZRS currently supports standard general-purpose v2, FileStorage and BlockBlobStorage storage account types.
Incorrect Answers:
A, not C: Live migration is supported only for storage accounts that use LRS replication. If your account uses GRS or RA-GRS, then
you need to first change your account's replication type to LRS before proceeding. This intermediary step removes the secondary
endpoint provided by GRS/RA-GRS.
Also, only standard storage account types support live migration. Premium storage accounts must be migrated manually.
D: ZRS currently supports standard general-purpose v2, FileStorage and BlockBlobStorage storage account types.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-zrs
B (100%)


Question #20Topic 3
You have an Azure subscription that contains a storage account named account1.
You plan to upload the disk files of a virtual machine to account1 from your on-premises network. The on-premises network uses a
public IP address space of
131.107.1.0/24.
You plan to use the disk files to provision an Azure virtual machine named VM1. VM1 will be attached to a virtual network named
VNet1. VNet1 uses an IP address space of 192.168.0.0/24.
You need to configure account1 to meet the following requirements:
✑ Ensure that you can upload the disk files to account1.
✑ Ensure that you can attach the disks to VM1.
✑ Prevent all other access to account1.
Which two actions should you perform? Each correct answer presents part of the solution.
 A. From the Networking blade of account1, select Selected networks. Most Voted
 B. From the Networking blade of account1, select Allow trusted Microsoft services to access this storage account.
 C. From the Networking blade of account1, add the 131.107.1.0/24 IP address range. Most Voted
 D. From the Networking blade of account1, add VNet1.
 E. From the Service endpoints blade of VNet1, add a service endpoint.

Correct Answer: AE �
A: By default, storage accounts accept connections from clients on any network. To limit access to selected networks, you must first
change the default action.
Azure portal -
1. Navigate to the storage account you want to secure.
2. Click on the settings menu called Firewalls and virtual networks.
3. To deny access by default, choose to allow access from 'Selected networks'. To allow traffic from all networks, choose to allow
access from 'All networks'.
4. Click Save to apply your changes.
E: Grant access from a Virtual Network
Storage accounts can be configured to allow access only from specific Azure Virtual Networks.
By enabling a Service Endpoint for Azure Storage within the Virtual Network, traffic is ensured an optimal route to the Azure Storage
service. The identities of the virtual network and the subnet are also transmitted with each request.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-network-security
AC (76%)
12%
8%
Question #21Topic 3
DRAG DROP -
You have an on-premises file server named Server1 that runs Windows Server 2016.
You have an Azure subscription that contains an Azure file share.
You deploy an Azure File Sync Storage Sync Service, and you create a sync group.
You need to synchronize files from Server1 to Azure.
Select and Place:

Correct
Answer:
Step 1: Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced with an Azure file share
Step 2: Register Server1.
Register Windows Server with Storage Sync Service
Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server (or cluster) and
the Storage Sync Service.
Step 3: Add a server endpoint -

Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in sync with each other. A sync
group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints. A server endpoint
represents a path on registered server.
Reference:
Question #22Topic 3
HOTSPOT -
You plan to create an Azure Storage account in the Azure region of East US 2.
You need to create a storage account that meets the following requirements:
✑ Replicates synchronously.
✑ Remains available if a single data center in the region fails.
How should you configure the storage account? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Box 1: Zone-redundant storage (ZRS)
Zone-redundant storage (ZRS) replicates your data synchronously across three storage clusters in a single region.
LRS would not remain available if a data center in the region fails
GRS and RA GRS use asynchronous replication.
Box 2: StorageV2 (general purpose V2)
ZRS only support GPv2.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy https://docs.microsoft.com/en-
us/azure/storage/common/storage-redundancy-zrs
Question #23Topic 3
You plan to use the Azure Import/Export service to copy files to a storage account.
Which two files should you create before you prepare the drives for the import job? Each correct answer presents part of the
solution.
 A. an XML manifest file

 B. a dataset CSV file
 C. a JSON configuration file
 D. a PowerShell PS1 file
 E. a driveset CSV file

Correct Answer: BE �
B: Modify the dataset.csv file in the root folder where the tool resides. Depending on whether you want to import a file or folder or
both, add entries in the dataset.csv file
E: Modify the driveset.csv file in the root folder where the tool resides.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-data-to-files
Question #24Topic 3
You have a Recovery Service vault that you use to test backups. The test backups contain two protected virtual machines.
You need to delete the Recovery Services vault.
 A. From the Recovery Service vault, delete the backup data.

 B. Modify the disaster recovery properties of each virtual machine.
 C. Modify the locks of each virtual machine.
 D. From the Recovery Service vault, stop the backup of each backup item.

You can't delete a Recovery Services vault if it is registered to a server and holds backup data. If you try to delete a vault, but can't,
the vault is still configured to receive backup data.
Remove vault dependencies and delete vault
In the vault dashboard menu, scroll down to the Protected Items section, and click Backup Items. In this menu, you can stop and
delete Azure File Servers, SQL
Servers in Azure VM, and Azure virtual machines.
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-delete-vault
D (100%)
Question #25Topic 3
HOTSPOT -
You have an Azure subscription named Subscription1 that contains the resources shown in the following table.
In storage1, you create a blob container named blob1 and a file share named share1.
Which resources can be backed up to Vault1 and Vault2? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Box 1: VM1 only -
VM1 is in the same region as Vault1.
File1 is not in the same region as Vautl1.
SQL is not in the same region as Vault1.
Blobs cannot be backup up to service vaults.
Note: To create a vault to protect virtual machines, the vault must be in the same region as the virtual machines.
Box 2: Share1 only.
Storage1 is in the same region (West USA) as Vault2. Share1 is in Storage1.
Note: After you select Backup, the Backup pane opens and prompts you to select a storage account from a list of discovered
supported storage accounts. They're either associated with this vault or present in the same region as the vault, but not yet
associated to any Recovery Services vault.
Reference:
https://docs.microsoft.com/bs-cyrl-ba/azure/backup/backup-create-rs-vault https://docs.microsoft.com/en-us/azure/backup/backup-
afs
Question #26Topic 3
You have 5 TB of data that you need to transfer to Subscription1.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?
 A. a virtual machine
 B. an Azure Cosmos DB database
 C. Azure File Storage
 D. the Azure File Sync Storage Sync Service

Azure Import/Export service is used to securely import large amounts of data to Azure Blob storage and Azure Files by shipping disk
drives to an Azure datacenter.
The maximum size of an Azure Files Resource of a file share is 5 TB.
Note:
There are several versions of this question in the exam. The question has two correct answers:
1. Azure File Storage
2. Azure Blob Storage
The question can have other incorrect answer options, including the following:
✑ Azure Data Lake Store
✑ Azure SQL Database
✑ Azure Data Factory
Reference:
Question #27Topic 3
HOTSPOT -
You create the Azure Storage account shown in the following exhibit.
graphic.
Hot Area:

Correct
Answer:
Box 1: 3 -
Locally Redundant Storage (LRS) provides highly durable and available storage within a single location (sub region). We maintain
an equivalent of 3 copies
(replicas) of your data within the primary location as described in our SOSP paper; this ensures that we can recover from common
failures (disk, node, rack) without impacting your storage account‫ג‬€™s availability and durability.
Box 2: Access tier -

Change the access tier from Hot to Cool.
Note: Azure storage offers different access tiers, which allow you to store blob object data in the most cost-effective manner. The
available access tiers include:
Hot - Optimized for storing data that is accessed frequently.
Cool - Optimized for storing data that is infrequently accessed and stored for at least 30 days.
Archive - Optimized for storing data that is rarely accessed and stored for at least 180 days with flexible latency requirements (on
the order of hours).
Reference:
https://azure.microsoft.com/en-us/blog/data-series-introducing-locally-redundant-storage-for-windows-azure-storage/
https://docs.microsoft.com/en-us/azure/storage/blobs/storage-blob-storage-tiers
Question #28Topic 3
You have an Azure Storage account named storage1.
You plan to use AzCopy to copy data to storage1.
You need to identify the storage services in storage1 to which you can copy the data.
Which storage services should you identify?
 A. blob, file, table, and queue

 B. blob and file only
 C. file and table only
 D. file only
 E. blob, table, and queue only

AzCopy is a command-line utility that you can use to copy blobs or files to or from a storage account.
Incorrect Answers:
A, C, E: AzCopy does not support table and queue storage services.
D: AzCopy supports file storage services, as well as blob storage services.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-use-azcopy-v10
Question #29Topic 3
HOTSPOT -
You have an Azure Storage account named storage1 that uses Azure Blob storage and Azure File storage.
You need to use AzCopy to copy data to the blob storage and file storage in storage1.
Which authentication method should you use for each type of storage? To answer, select the appropriate options in the answer
area.
Hot Area:

Correct
Answer:
You can provide authorization credentials by using Azure Active Directory (AD), or by using a Shared Access Signature (SAS)
token.
Box 1:
Both Azure Active Directory (AD) and Shared Access Signature (SAS) token are supported for Blob storage.
Box 2:
Only Shared Access Signature (SAS) token is supported for File storage.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-use-azcopy-v10


Question #30Topic 3
You have an Azure subscription that contains an Azure Storage account.
You plan to create an Azure container instance named container1 that will use a Docker image named Image1. Image1 contains a
Microsoft SQL Server instance that requires persistent storage.
You need to configure a storage service for Container1.
 A. Azure Files Most Voted

 B. Azure Blob storage
 C. Azure Queue storage
 D. Azure Table storage


A (91%)
4%
Question #31Topic 3
You have an app named App1 that runs on two Azure virtual machines named VM1 and VM2.
You plan to implement an Azure Availability Set for App1. The solution must ensure that App1 is available during planned
maintenance of the hardware hosting
VM1 and VM2.
What should you include in the Availability Set?
 A. one update domain

 B. two fault domains
 C. one fault domain
 D. two update domains Most Voted

Microsoft updates, which Microsoft refers to as planned maintenance events, sometimes require that VMs be rebooted to complete
the update. To reduce the impact on VMs, the Azure fabric is divided into update domains to ensure that not all VMs are rebooted at
the same time.
Incorrect Answers:
A: An update domain is a group of VMs and underlying physical hardware that can be rebooted at the same time.
B, C: A fault domain shares common storage as well as a common power source and network switch. It is used to protect against
unplanned system failure.
References:
https://petri.com/understanding-azure-availability-sets
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/tutorial-availability-sets
D (100%)
Question #32Topic 3
 A. an Azure Cosmos DB database

 B. Azure Blob storage
 C. Azure Data Lake Store
 D. the Azure File Sync Storage Sync Service

Azure Import/Export service is used to securely import large amounts of data to Azure Blob storage and Azure Files by shipping disk
drives to an Azure datacenter.
Note:
There are several versions of this question in the exam. The question has two correct answers:
1. Azure File Storage
2. Azure Blob Storage
✑ a virtual machine
✑ Azure SQL Database
✑ Azure Data Factory
Reference:
B (100%)
Question #33Topic 3
DRAG DROP -
You have an Azure subscription that contains an Azure file share.
You have an on-premises server named Server1 that runs Windows Server 2016.
You plan to set up Azure File Sync between Server1 and the Azure file share.
You need to prepare the subscription for the planned Azure File Sync.
Which two actions should you perform in the Azure subscription? To answer, drag the appropriate actions to the correct targets.
Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.
Select and Place:

Correct
Answer:
First action: Create a Storage Sync Service
The deployment of Azure File Sync starts with placing a Storage Sync Service resource into a resource group of your selected
subscription.
Second action: Install the Azure File Sync agent
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced with an Azure file share.
Reference:
Question #34Topic 3
HOTSPOT -
You have an Azure subscription that contains the file shares shown in the following table.
You have the on-premises file shares shown in the following table.
You create an Azure file sync group named Sync1 and perform the following actions:
✑ Add share1 as the cloud endpoint for Sync1.
✑ Add data1 as a server endpoint for Sync1.
✑ Register Server1 and Server2 to Sync1.
Hot Area:

Correct
Answer:
Box 1: No -
A sync group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints.
Box 2: Yes -
Data2 is located on Server2 which is registered to Sync1.
Box 3: No -
Data3 is located on Server3 which is not registered to Sync1.
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide?tabs=azure-portal%2Cproactive-
portal#create-a-sync-group-and-a- cloud-endpoint
Question #35Topic 3
HOTSPOT -
You have an Azure subscription named Subscription1 that contains the resources shown in the following table:
You plan to configure Azure Backup reports for Vault1.
You are configuring the Diagnostics settings for the AzureBackupReports log.
Which storage accounts and which Log Analytics workspaces can you use for the Azure Backup reports of Vault1? To answer,
select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Box 1: storage1, storage2, and storage3
The location and subscription where this Log Analytics workspace can be created is independent of the location and subscription
where your vaults exist.
Box 2: Analytics3 -
Vault1 and Analytics3 are both in West Europe.
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-configure-reports
Question #36Topic 3
HOTSPOT -
You have an Azure subscription that contains the storage accounts shown in the following exhibit.
graphic.
Hot Area:

Correct
Answer:
Box 1: contoso104 only -

Premium file shares are hosted in a special purpose storage account kind, called a FileStorage account.
Box 2: contoso101, contoso102, and contos103 only
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-create-premium-fileshare?tabs=azure-portal
https://docs.microsoft.com/en-us/azure/storage/blobs/storage-blob-storage-tiers
Question #37Topic 3
HOTSPOT -
In Subscription1, you create an Azure file share named share1.
You create a shared access signature (SAS) named SAS1 as shown in the following exhibit:
To answer, select the appropriate options in the answer area.

Hot Area:

Correct
Answer:
Box 1: Will have no access -

The IP 193.77.134.1 does not have access on the SAS.
Box 2: Will have read, write, and list access
The net use command is used to connect to file shares.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-dotnet-shared-access-signature-part-1
https://docs.microsoft.com/en-us/azure/vs-azure-tools-storage-manage-with-storage-explorer?tabs=windows
Question #38Topic 3
You have two Azure virtual machines named VM1 and VM2. You have two Recovery Services vaults named RSV1 and RSV2.
VM2 is backed up to RSV1.
You need to back up VM2 to RSV2.
 A. From the RSV1 blade, click Backup items and stop the VM2 backup Most Voted
 B. From the RSV2 blade, click Backup. From the Backup blade, select the backup for the virtual machine, and then click Backup
 C. From the VM2 blade, click Disaster recovery, click Replication settings, and then select RSV2 as the Recovery Services vault
 D. From the RSV1 blade, click Backup Jobs and export the VM2 job

Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm
A (100%)
Question #39Topic 3
You have a general-purpose v1 Azure Storage account named storage1 that uses locally-redundant storage (LRS).
You need to ensure that the data in the storage account is protected if a zone fails. The solution must minimize costs and
administrative effort.
 A. Create a new storage account.

 B. Configure object replication rules.
 C. Upgrade the account to general-purpose v2.
 D. Modify the Replication setting of storage1.

Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy


Question #40Topic 3
You have an Azure subscription that contains the storage accounts shown in the following table.
You plan to manage the data stored in the accounts by using lifecycle management rules.
To which storage accounts can you apply lifecycle management rules?
 A. storage1 only
 B. storage1 and storage2 only
 C. storage3 and storage4 only
 D. storage1, storage2, and storage3 only
 E. storage1, storage2, storage3, and storage4

Reference:
https://docs.microsoft.com/en-us/azure/storage/blobs/storage-lifecycle-management-concepts?tabs=azure-portal
D (60%)
C (40%)
Question #41Topic 3
You create an Azure Storage account named contosostorage.
You plan to create a file share named data.
Users need to map a drive to the data file share from home computers that run Windows 10.
Which outbound port should you open between the home computers and the data file share?
 A. 80
 B. 443
 C. 445
 D. 3389

Server Message Block (SMB) is used to connect to an Azure file share over the internet. The SMB protocol requires TCP port 445 to
be open.
Incorrect Answers:
A: Port 80 is required for HTTP to a web server
B: Port 443 is required for HTTPS to a web server
D: Port 3389443 is required for Remote desktop protocol (RDP) connections
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
C (100%)
Question #42Topic 3
 A. Azure File Storage

 B. an Azure Cosmos DB database
 C. Azure Data Factory
 D. Azure SQL Database

Reference:
https://docs.microsoft.com/en-us/azure/import-export/storage-import-export-service
A (100%)
Question #43Topic 3
HOTSPOT -
You have an Azure subscription that contains an Azure Storage account named storageaccount1.
You export storageaccount1 as an Azure Resource Manager template. The template contains the following sections.
NOTE: Each correct selection is worth one point
Hot Area:

Correct
Answer:
Reference:
https://docs.microsoft.com/en-us/azure/templates/microsoft.storage/storageaccounts?tabs=json

Question #1Topic 4
review screen.
You have an Azure virtual machine named VM1 that runs Windows Server 2016.
You need to create an alert in Azure when more than two error events are logged to the System event log on VM1 within an hour.
Solution: You create an Azure Log Analytics workspace and configure the data settings. You add the Microsoft Monitoring Agent VM
extension to VM1. You create an alert in Azure Monitor and specify the Log Analytics workspace as the source.
 A. Yes
 B. No

You must install the Microsoft Monitoring Agent on VM1, and not the Microsoft Monitoring Agent VM extension.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/agents-overview
Question #2Topic 4
review screen.
Solution: You create an Azure Log Analytics workspace and configure the data settings. You install the Microsoft Monitoring Agent
on VM1. You create an alert in
Azure Monitor and specify the Log Analytics workspace as the source.
 A. Yes
 B. No

Alerts in Azure Monitor can identify important information in your Log Analytics repository. They are created by alert rules that
automatically run log searches at regular intervals, and if results of the log search match particular criteria, then an alert record is
created and it can be configured to perform an automated response.
The Log Analytics agent collects monitoring data from the guest operating system and workloads of virtual machines in Azure, other
cloud providers, and on- premises. It collects data into a Log Analytics workspace.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/learn/tutorial-response https://docs.microsoft.com/en-us/azure/azure-
monitor/platform/agents-overview
A (100%)
Question #3Topic 4
All virtual machines run Windows Server 2016.

On VM1, you back up a folder named Folder1 as shown in the following exhibit.
You plan to restore the backup to a different virtual machine.
You need to restore the backup to VM2.
 A. From VM1, install the Windows Server Backup feature.

 B. From VM2, install the Microsoft Azure Recovery Services Agent.
 C. From VM1, install the Microsoft Azure Recovery Services Agent.
 D. From VM2, install the Windows Server Backup feature.

Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-windows-server
B (100%)
Question #4Topic 4
HOTSPOT -
You need to use an Azure Resource Manager (ARM) template to create a virtual machine that will have multiple data disks.
How should you complete the template? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
Question #5Topic 4
review screen.
VM1 connects to a virtual network named VNET2 by using a network interface named NIC1.
You need to create a new network interface named NIC2 for VM1.
Solution: You create NIC2 in RG1 and West US.
 A. Yes
 B. No

The virtual machine you attach a network interface to and the virtual network you connect it to must exist in the same location, here
West US, also referred to as a region.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-network-interface
Question #6Topic 4
review screen.
Solution: You create NIC2 in RG2 and Central US.
 A. Yes
 B. No

Reference:


Question #4Topic 4
HOTSPOT -
You need to use an Azure Resource Manager (ARM) template to create a virtual machine that will have multiple data disks.
How should you complete the template? To answer, select the appropriate options in the answer area.
Hot Area:
Correct
Answer:
Question #5Topic 4
review screen.
 A. Yes
 B. No

Reference:
A (100%)
Question #6Topic 4
review screen.
Solution: You create NIC2 in RG2 and Central US.
 A. Yes
 B. No

Reference:
Question #7Topic 4
review screen.
 A. Yes
 B. No
Reference:
Question #8Topic 4
review screen.
You deploy an Azure Kubernetes Service (AKS) cluster named AKS1.
You need to deploy a YAML file to AKS1.
Solution: From Azure CLI, you run az aks.
 A. Yes
 B. No
Reference:
https://docs.microsoft.com/en-us/azure/aks/kubernetes-walkthrough
B (100%)
Question #9Topic 4
review screen.
Solution: From Azure CLI, you run the kubectl client.
 A. Yes
 B. No

Reference:
A (100%)
Question #10Topic 4
review screen.
Solution: From Azure CLI, you run azcopy.
 A. Yes
 B. No

Reference:
B (100%)
Question #11Topic 4
review screen.
Solution: You create an Azure storage account and configure shared access signatures (SASs). You install the Microsoft Monitoring
Agent on VM1. You create an alert in Azure Monitor and specify the storage account as the source.
 A. Yes
 B. No

Instead: You create an Azure Log Analytics workspace and configure the data settings. You install the Microsoft Monitoring Agent
Reference:
B (100%)
Question #12Topic 4
HOTSPOT -
You have an Azure subscription named Subscription1. Subscription1 contains the resources in the following table.
VNet1 is in RG1. VNet2 is in RG2. There is no connectivity between VNet1 and VNet2.
An administrator named Admin1 creates an Azure virtual machine named VM1 in RG1. VM1 uses a disk named Disk1 and connects
to VNet1. Admin1 then installs a custom application in VM1.
You need to move the custom application to VNet2. The solution must minimize administrative effort.
Which two actions should you perform? To answer, select the appropriate options in the answer area.
Hot Area:

Correct
Answer:
We cannot just move a virtual machine between networks. What we need to do is identify the disk used by the VM, delete the VM
itself while retaining the disk, and recreate the VM in the target virtual network and then attach the original disk to it.
Reference:
https://blogs.technet.microsoft.com/canitpro/2014/06/16/step-by-step-move-a-vm-to-a-different-vnet-on-azure/
https://4sysops.com/archives/move-an-azure-vm-to-another-virtual-network-vnet/#migrate-an-azure-vm-between-vnets
Question #13Topic 4
You download an Azure Resource Manager template based on an existing virtual machine. The template will be used to deploy 100
virtual machines.
You need to modify the template to reference an administrative password. You must prevent the password from being stored in
plain text.
What should you create to store the password?
 A. an Azure Key Vault and an access policy

 B. an Azure Storage account and an access policy
 C. a Recovery Services vault and a backup policy
 D. Azure Active Directory (AD) Identity Protection and an Azure policy

You can use a template that allows you to deploy a simple Windows VM by retrieving the password that is stored in a Key Vault.
Therefore, the password is never put in plain text in the template parameter file.
Reference:
https://azure.microsoft.com/en-us/resources/templates/101-vm-secure-password/
A (100%)


Question #14Topic 4
HOTSPOT -
You have the App Service plans shown in the following table.
You plan to create the Azure web apps shown in the following table.
You need to identify which App Service plans can be used for the web apps.
What should you identify? To answer, select the appropriate options in the answer area.
Hot Area:

Correct Answer:
Box 1: ASP1 ASP3 -
Asp1, ASP3: ASP.NET Core apps can be hosted both on Windows or Linux.
Not ASP2: The region in which your app runs is the region of the App Service plan it's in.
Box 2: ASP1 -
ASP.NET apps can be hosted on Windows only.
Reference:
https://docs.microsoft.com/en-us/azure/app-service/quickstart-dotnetcore?pivots=platform-linux https://docs.microsoft.com/en-
us/azure/app-service/app-service-plan-manage#
Question #15Topic 4
HOTSPOT -
You create a virtual machine scale set named Scale1. Scale1 is configured as shown in the following exhibit.
graphic.
Hot Area:
Correct
Answer:
Box 1: 6 virtual machines -
The Autoscale scale out rule increases the number of VMs by 2 if the CPU threshold is 80% or higher. The initial instance count is 4
and rises to 6 when the 2 extra instances of VMs are added.
Box 2: 2 virtual machnes -

The Autoscale scale in rule decreases the number of VMs by 4 if the CPU threshold is 30% or lower. The initial instance count is 4
and thus cannot be reduced to
0 as the minimum instances is set to 2. Instances are only added when the CPU threshold reaches 80%.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-overview https://docs.microsoft.com/en-us/azure/azure-
monitor/platform/autoscale-best-practices https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-common-scale-
patterns
Question #16Topic 4
You plan to automate the deployment of a virtual machine scale set that uses the Windows Server 2016 Datacenter image.
You need to ensure that when the scale set virtual machines are provisioned, they have web server components installed.
 A. Upload a configuration script Most Voted

 B. Create an automation account
 C. Create an Azure policy
 D. Modify the extensionProfile section of the Azure Resource Manager template Most Voted
 E. Create a new virtual machine scale set in the Azure portal

Correct Answer: DE �
Virtual Machine Scale Sets can be used with the Azure Desired State Configuration (DSC) extension handler. Virtual machine scale
sets provide a way to deploy and manage large numbers of virtual machines, and can elastically scale in and out in response to
load. DSC is used to configure the VMs as they come online so they are running the production software.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-dsc
AD (83%)
DE (17%)
Question #17Topic 4
HOTSPOT -
You have an Azure Kubernetes Service (AKS) cluster named AKS1 and a computer named Computer1 that runs Windows 10.
Computer1 that has the Azure CLI installed.
You need to install the kubectl client on Computer1.
Which command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct
Answer:
To install kubectl locally, use the az aks install-cli command: az aks install-cli
Reference:
Question #18Topic 4
DRAG DROP -
You onboard 10 Azure virtual machines to Azure Automation State Configuration.
You need to use Azure Automation State Configuration to manage the ongoing consistency of the virtual machine configurations.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:
Correct
Answer:
Step 1: Upload a configuration to Azure Automation State Configuration.

Import the configuration into the Automation account.
Step 2: Compile a configuration into a node configuration.
A DSC configuration defining that state must be compiled into one or more node configurations (MOF document), and placed on the
Automation DSC Pull Server.
Step 3: Assign the node configuration
Then: Check the compliance status of the node
Each time Azure Automation State Configuration performs a consistency check on a managed node, the node sends a status report
back to the pull server. You can view these reports on the page for that node.
On the blade for an individual report, you can see the following status information for the corresponding consistency check:
The report status ‫ג‬€" whether the node is "Compliant", the configuration "Failed", or the node is "Not Compliant"
Reference:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started
Question #19Topic 4
You have an Azure Resource Manager template named Template1 that is used to deploy an Azure virtual machine.
Template1 contains the following text:
The variables section in Template1 contains the following text:

"location": "westeurope"
The resources section in Template1 contains the following text:
You need to deploy the virtual machine to the West US location by using Template1.
What should you do?
 A. Modify the location in the resources section to westus

 B. Select West US during the deployment
 C. Modify the location in the variables section to westus

A (100%)
Question #20Topic 4
You create an App Service plan named Plan1 and an Azure web app named webapp1.
You discover that the option to create a staging slot is unavailable.
You need to create a staging slot for Plan1.
 A. From Plan1, scale up the App Service plan

 B. From webapp1, modify the Application settings
 C. From webapp1, add a custom domain
 D. From Plan1, scale out the App Service plan
The app must be running in the Standard, Premium, or Isolated tier in order for you to enable multiple deployment slots.
If the app isn't already in the Standard, Premium, or Isolated tier, you receive a message that indicates the supported tiers for
enabling staged publishing. At this point, you have the option to select Upgrade and go to the Scale tab of your app before
continuing.
Scale up: Get more CPU, memory, disk space, and extra features like dedicated virtual machines (VMs), custom domains and
certificates, staging slots, autoscaling, and more.
Incorrect:
Scale out: Increase the number of VM instances that run your app. You can scale out to as many as 30 instances
Reference:
https://docs.microsoft.com/en-us/azure/app-service/deploy-staging-slots https://docs.microsoft.com/en-us/azure/app-
service/manage-scale-up
A (100%)
Question #21Topic 4
You plan to move a distributed on-premises app named App1 to an Azure subscription.
After the planned move, App1 will be hosted on several Azure virtual machines.
You need to ensure that App1 always runs on at least eight virtual machines during planned Azure maintenance.
What should you create?
 A. one virtual machine scale set that has 10 virtual machines instances Most Voted
 B. one Availability Set that has three fault domains and one update domain
 C. one Availability Set that has 10 update domains and one fault domain
 D. one virtual machine scale set that has 12 virtual machines instances

An update domain is a logical group of underlying hardware that can undergo maintenance or be rebooted at the same time. As you
create VMs within an availability set, the Azure platform automatically distributes your VMs across these update domains. This
approach ensures that at least one instance of your application always remains running as the Azure platform undergoes periodic
maintenance.
Reference:
http://www.thatlazyadmin.com/azure-fault-update-domains/
A (89%)
11%
Question #22Topic 4
review screen.
Solution: You create an event subscription on VM1. You create an alert in Azure Monitor and specify VM1 as the source
 A. Yes
 B. No

Instead: You create an Azure Log Analytics workspace and configure the data settings. You install the Microsoft Monitoring Agent
Reference:
Question #23Topic 4
review screen.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named
ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Overview blade, you move the virtual machine to a different subscription.
 A. Yes
 B. No

You would need to redeploy the VM.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node


Question #24Topic 4
review screen.
ARM1.json.
Solution: From the Redeploy blade, you click Redeploy.
 A. Yes
 B. No

When you redeploy a VM, it moves the VM to a new node within the Azure
infrastructure and then powers it back on, retaining all your configuration options and
associated resources.
References:
A (100%)
Question #25Topic 4
review screen.
ARM1.json.
Solution: From the Update management blade, you click Enable.
 A. Yes
 B. No
You would need to redeploy the VM.
Reference:
B (100%)
Question #26Topic 4
You have an Azure subscription that contains a web app named webapp1.
You need to add a custom domain named www.contoso.com to webapp1.
 A. Create a DNS record

 B. Add a connection string
 C. Upload a certificate.
 D. Stop webapp1.
You can use either a CNAME record or an A record to map a custom DNS name to App
Service.
Reference:
https://docs.microsoft.com/en-us/Azure/app-service/app-service-web-tutorial-custom-
domain
A (100%)
Question #27Topic 4
review screen.
VM1 connects to VNET1.
You need to connect VM1 to VNET2.
Solution: You move VM1 to RG2, and then you add a new network interface to VM1.
 A. Yes
 B. No
Instead you should delete VM1. You recreate VM1, and then you add the network
interface for VM1.
Note: When you create an Azure virtual machine (VM), you must create a virtual
network (VNet) or use an existing VNet. You can change the subnet a VM is connected
to after it's created, but you cannot change the VNet.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/network-overview
Question #28Topic 4
review screen.

Solution: You delete VM1. You recreate VM1, and then you create a new network interface for VM1 and connect it to VNET2.
 A. Yes
 B. No
You should delete VM1. You recreate VM1, and then you add the network interface for
VM1.
Reference:
A (100%)
Question #29Topic 4
review screen.

Solution: You turn off VM1, and then you add a new network interface to VM1.
 A. Yes
 B. No
Instead you should delete VM1. You recreate VM1, and then you add the network
interface for VM1.
Reference:
Question #30Topic 4
HOTSPOT -
You have an Azure subscription named Subscription1 that contains the quotas shown in the following table.
You deploy virtual machines to Subscription1 as shown in the following table.
You plan to deploy the virtual machines shown in the following table.
Hot Area:

Correct
Answer:
The total regional vCPUs is 20 so that means a maximum total of 20 vCPUs across all
the different VM sizes. The deallocated VM with 16 vCPUs counts towards the total.
VM20 and VM1 are using 18 of the maximum 20 vCPUs leaving only two vCPUs
available.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/quotas
Question #31Topic 4
HOTSPOT -
You have an Azure subscription that contains an Azure Availability Set named WEBPROD-AS-USE2 as shown in the following
exhibit.
You add 14 virtual machines to WEBPROD-AS-USE2.
graphic.
Hot Area:
Correct
Answer:
Box 1: 2 -
There are 10 update domains. The 14 VMs are shared across the 10 update domains
so four update domains will have two VMs and six update domains will have one VM.
Only one update domain is rebooted at a time. Therefore, a maximum of two VMs will
be offline.
Box 2: 7 -
There are 2 fault domains. The 14 VMs are shared across the 2 fault domains, so 7
VMs in each fault domain. A rack failure will affect one fault domain so 7 VMs will be
offline.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/manage-availability
Question #32Topic 4
You deploy an Azure Kubernetes Service (AKS) cluster named Cluster1 that uses the IP addresses shown in the following table.
You need to provide internet users with access to the applications that run in Cluster1.
Which IP address should you include in the DNS record for Cluster1?
 A. 131.107.2.1
 B. 10.0.10.11
 C. 172.17.7.1
 D. 192.168.10.2

A (100%)
Question #33Topic 4
You have a deployment template named Template1 that is used to deploy 10 Azure web apps.
You need to identify what to deploy before you deploy Template1. The solution must minimize Azure costs.
 A. five Azure Application Gateways

 B. one App Service plan
 C. 10 App Service plans
 D. one Azure Traffic Manager
 E. one Azure Application Gateway

You create Azure web apps in an App Service plan.
Reference:
https://docs.microsoft.com/en-us/azure/app-service/overview-hosting-plans

Question #34Topic 4
HOTSPOT -
You plan to deploy an Azure container instance by using the following Azure Resource Manager template.
template.
Hot Area:
Correct
Answer:
Question #35Topic 4
You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-of-business application that is
available 24 hours a day. VM1 has one network interface and one managed disk. VM1 uses the D4s v3 size.
You plan to make the following changes to VM1:
✑ Change the size to D8s v3.
✑ Add a 500-GB managed disk.
✑ Add the Puppet Agent extension.
✑ Enable Desired State Configuration Management.
Which change will cause downtime for VM1?
 A. Enable Desired State Configuration Management

 B. Add a 500-GB managed disk
 C. Change the size to D8s v3
 D. Add the Puppet Agent extension

While resizing the VM it must be in a stopped state.
Reference:
https://azure.microsoft.com/en-us/blog/resize-virtual-machines/
Question #36Topic 4
You have an app named App1 that runs on an Azure web app named webapp1.
The developers at your company upload an update of App1 to a Git repository named Git1.
Webapp1 has the deployment slots shown in the following table.
You need to ensure that the App1 update is tested before the update is made available to users.
 A. Swap the slots

 B. Deploy the App1 update to webapp1-prod, and then test the update
 C. Stop webapp1-prod
 D. Deploy the App1 update to webapp1-test, and then test the update
 E. Stop webapp1-test

Correct Answer: AD �
AD (100%)
Question #37Topic 4
You have an Azure subscription named Subscription1 that has the following providers registered:
✑ Authorization
✑ Automation
✑ Resources
✑ Compute
✑ KeyVault
✑ Network
✑ Storage
✑ Billing
✑ Web
Subscription1 contains an Azure virtual machine named VM1 that has the following configurations:
✑ Private IP address: 10.0.0.4 (dynamic)
✑ Network security group (NSG): NSG1
✑ Public IP address: None
✑ Availability set: AVSet
✑ Subnet: 10.0.0.0/24
✑ Managed disks: No
✑ Location: East US
You need to record all the successful and failed connection attempts to VM1.
Which three actions should you perform? Each correct answer presents part of the solution.
 A. Enable Azure Network Watcher in the East US Azure region.
 B. Add an Azure Network Watcher connection monitor.
 C. Register the MicrosoftLogAnalytics provider.
 D. Create an Azure Storage account. Most Voted
 E. Register the Microsoft.Insights resource provider. Most Voted
 F. Enable Azure Network Watcher flow logs. Most Voted

Correct Answer: AEF �
You can log network traffic that flows through an NSG with Network Watcher's NSG flow log capability.
✑ In the Azure portal, enable Network Watcher
✑ Register Insights provider. NSG flow logging requires the Microsoft.Insights provider.
✑ Enable NSG flow log. NSG flow log data is written to an Azure Storage account, Subscription1 has storage.
Reference:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-nsg-flow-logging-portal
DEF (76%)
AEF (24%)
Question #38Topic 4
You need to deploy an Azure virtual machine scale set that contains five instances as quickly as possible.
What should you do?
 A. Deploy five virtual machines. Modify the Availability Zones settings for each virtual machine.
 B. Deploy five virtual machines. Modify the Size setting for each virtual machine.
 C. Deploy one virtual machine scale set that is set to VM (virtual machines) orchestration mode.
 D. Deploy one virtual machine scale set that is set to ScaleSetVM orchestration mode. Most Voted

Reference:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/orchestration-modes
D (100%)
Question #39Topic 4
You plan to create the Azure web apps shown in the following table.
What is the minimum number of App Service plans you should create for the web apps?
 A. 1
 B. 2 Most Voted
 C. 3
 D. 4
B (89%)
11%
Question #40Topic 4
HOTSPOT -
You have a pay-as-you-go Azure subscription that contains the virtual machines shown in the following table.
You create the budget shown in the following exhibit.

The AG1 action group contains a user named [email protected] only.
graphic.
Hot Area:
Correct
Answer:
Box 1: VM1 and VM2 continue to run

The budget alerts are for Resource Group RG1, which include VM1, but not VM2. However, when the budget thresholds you've
created are exceeded, only notifications are triggered. None of your resources are affected and your consumption isn't stopped.
Box 2: one email notification will be sent each month.
Budget alerts for Resource Group RG1, which include VM1, but not VM2.VM1 consumes 20 Euro/day. The 50%, 500 Euro limit, will
be reached in 25 days, and an email will be sent.
The 70% and 100% alert conditions will not be reached within a month, and they don't trigger email actions anyway.
Credit alerts: Credit alerts are generated automatically at 90% and at 100% of your Azure credit balance. Whenever an alert is
generated, it's reflected in cost alerts and in the email sent to the account owners. 90% and 100% will not be reached though.
Reference:
https://docs.microsoft.com/en-us/azure/cost-management-billing/costs/cost-mgt-alerts-monitor-usage-spending
https://docs.microsoft.com/en-gb/azure/cost-management-billing/costs/tutorial-acm-create-budgets
Question #41Topic 4
review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains
resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic deployment.
 A. Yes
 B. No

From the RG1 blade, click Deployments. You see a history of deployment for the resource group.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/templates/template-tutorial-create-first-template?tabs=azure-
powershell
B (100%)
Question #42Topic 4
review screen.

Solution: You create a new network interface, and then you add the network interface to VM1.
 A. Yes
 B. No

You should delete VM1. You recreate VM1, and then you add the network interface for VM1.
Note: When you create an Azure virtual machine (VM), you must create a virtual network (VNet) or use an existing VNet. You can
change the subnet a VM is connected to after it's created, but you cannot change the VNet.
Reference:
Question #43Topic 4
You have an Azure Active Directory (Azure AD) tenant named adatum.com that contains the users shown in the following table.
Adatum.com has the following configurations:

✑ Users may join devices to Azure AD is set to User1.
✑ Additional local administrators on Azure AD joined devices is set to None.
You deploy Windows 10 to a computer named Computer1. User1 joins Computer1 to adatum.com.
You need to identify the local Administrator group membership on Computer1.
Which users are members of the local Administrators group?
 A. User1 only
 B. User2 only
 C. User1 and User2 only
 D. User1, User2, and User3 only
 E. User1, User2, User3, and User4

Users may join devices to Azure AD - This setting enables you to select the users who can register their devices as Azure AD joined
devices. The default is All.
Additional local administrators on Azure AD joined devices - You can select the users that are granted local administrator rights on a
device. Users added here are added to the Device Administrators role in Azure AD. Global administrators, here User2, in Azure AD
and device owners are granted local administrator rights by default.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/devices/device-management-azure-portal
C (100%)


Question #44Topic 4
HOTSPOT -
You have Azure subscriptions named Subscription1 and Subscription2.
Subscription1 has following resource groups:
RG1 includes a web app named App1 in the West Europe location.
Subscription2 contains the following resource groups:
Hot Area:
Correct Answer:
Box 1: No -
RG2 is read only. ReadOnly means authorized users can read a resource, but they cannot delete or update the resource.
Box 2: Yes -
Box 3: Yes -
Note:
App Service resources are region-specific and cannot be moved directly across regions. You can move the App Service resource by
creating a copy of your existing App Service resource in the target region, then move your content over to the new app. You can
then delete the source app and App Service plan.
To make copying your app easier, you can clone an individual App Service app into an App Service plan in another region.
Reference:
https://docs.microsoft.com/en-us/azure/app-service/manage-move-across-regions https://docs.microsoft.com/en-us/azure/azure-
resource-manager/management/move-limitations/app-service-move-limitations
Question #45Topic 4
HOTSPOT -
You have an Azure subscription named Subscription1 that contains the following resource group:
✑ Name: RG1
✑ Region: West US
✑ Tag: ‫ג‬€tag1‫ג‬€: ‫ג‬€value1‫ג‬€
You assign an Azure policy named Policy1 to Subscription1 by using the following configurations:
✑ Exclusions: None
✑ Policy definition: Append a tag and its value to resources
✑ Assignment name: Policy1
✑ Parameters:
✑ Tag name: tag2
Tag value: value2 -
After Policy1 is assigned, you create a storage account that has the following configuration:
✑ Name: storage1
✑ Location: West US
✑ Resource group: RG1
✑ Tags: ‫ג‬€tag3‫ג‬€: ‫ג‬€value3‫ג‬€
You need to identify which tags are assigned to each resource.
What should you identify? To answer, select the appropriate options in the answer area.
Hot Area:
Hide Solution Discussion
Correct
Answer:
Box 1: "tag1": "value1" only -
Box 2: "tag2": "value2" and "tag3": "value3" only
Tags applied to the resource group are not inherited by the resources in that resource group.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
Question #46Topic 4
HOTSPOT -
In Subscription1, you create an alert rule named Alert1.
The Alert1 action group is configured as shown in the following exhibit.
Alert1 alert criteria triggered every minute.

graphic.
Hot Area:
Correct
Answer:
Box 1: 60 -
One alert per minute will trigger one email per minute.
Box 2: 12 -
No more than 1 SMS every 5 minutes can be send, which equals 12 per hour.
Note: Rate limiting is a suspension of notifications that occurs when too many are sent to a particular phone number, email address
or device. Rate limiting ensures that alerts are manageable and actionable.
The rate limit thresholds are:
✑ SMS: No more than 1 SMS every 5 minutes.
✑ Voice: No more than 1 Voice call every 5 minutes.
✑ Email: No more than 100 emails in an hour.
✑ Other actions are not rate limited.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/alerts-rate-limiting
Question #47Topic 4
You create virtual machines in Subscription1 as shown in the following table.
You plan to use Vault1 for the backup of as many virtual machines as possible.
Which virtual machines can be backed up to Vault1?
 A. VM1 only
 B. VM3 and VMC only
 C. VM1, VM2, VM3, VMA, VMB, and VMC
 D. VM1, VM3, VMA, and VMC only
 E. VM1 and VM3 only

To create a vault to protect virtual machines, the vault must be in the same region as the virtual machines. If you have virtual
machines in several regions, create a
Recovery Services vault in each region.
Reference:
https://docs.microsoft.com/bs-cyrl-ba/azure/backup/backup-create-rs-vault
D (100%)
Question #48Topic 4
You have an Azure Kubernetes Service (AKS) cluster named AKS1.

You need to configure cluster autoscaler for AKS1.
Which two tools should you use? Each correct answer presents a complete solution.
 A. the kubectl command

 B. the az aks command Most Voted
 C. the Set-AzVm cmdlet
 D. the Azure portal Most Voted
 E. the Set-AzAks cmdlet

Correct Answer: AB �
A: The following example uses the kubectl autoscale command to autoscale the number of pods in the azure-vote-front deployment.
If average CPU utilization across all pods exceeds 50% of their requested usage, the autoscaler increases the pods up to a
maximum of 10 instances. A minimum of 3 instances is then defined for the deployment: kubectl autoscale deployment azure-vote-
front --cpu-percent=50 --min=3 --max=10
B: Use the az aks update command to enable and configure the cluster autoscaler on the node pool for the existing cluster.
Reference:
https://docs.microsoft.com/en-us/azure/aks/tutorial-kubernetes-scale https://docs.microsoft.com/en-us/azure/aks/cluster-autoscaler
BD (64%)
AB (36%)
Question #49Topic 4
You create the following resources in an Azure subscription:

✑ An Azure Container Registry instance named Registry1
✑ An Azure Kubernetes Service (AKS) cluster named Cluster1
You create a container image named App1 on your administrative workstation.
You need to deploy App1 to Cluster1.
 A. Run the docker push command. Most Voted

 B. Create an App Service plan.
 C. Run the az acr build command.
 D. Run the az aks create command.

You should sign in and push a container image to Container Registry.
Run the az acr build command to build and push the container image. az acr build \
--image contoso-website \
--registry $ACR_NAME \
--file Dockerfile .
Reference:
https://docs.microsoft.com/en-us/learn/modules/aks-deploy-container-app/5-exercise-deploy-app
A (65%)
C (35%)
Question #50Topic 4
You need to configure a proximity placement group for VMSS1.
Which proximity placement groups should you use?
 A. Proximity2 only
 B. Proximity1, Proximity2, and Proximity3
 C. Proximity1 only
 D. Proximity1 and Proximity3 only

Resource Group location of VMSS1 is the RG2 location, which is West US.
Only Proximity2, which also in RG2, is location in West US
Reference:
https://azure.microsoft.com/en-us/blog/introducing-proximity-placement-groups/
A (67%)
C (33%)
Question #51Topic 4
review screen.
Solution: From the Subscriptions blade, you select the subscription, and then click Resource providers.
 A. Yes
 B. No

B (100%)
Question #52Topic 4
review screen.
Solution: From the RG1 blade, you click Automation script.
 A. Yes
 B. No

Reference:
powershell
Question #53Topic 4
review screen.
Solution: From the RG1 blade, you click Deployments.
 A. Yes
 B. No

Reference:
powershell


Question #54Topic 4

You deploy a Linux virtual machine named VM1 to Subscription1.
You need to monitor the metrics and the logs of VM1.
 A. Azure HDInsight
 B. Linux Diagnostic Extension (LAD) 3.0 Most Voted
 C. the AzurePerformanceDiagnostics extension

 D. Azure Analysis Services
The Linux Diagnostic Extension should be used which downloads the Diagnostic
Extension (LAD) agent on Linux server.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/extensions/diagnostics-linux
B (89%)
11%
Question #55Topic 4
HOTSPOT -
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1.
You install and configure a web server and a DNS server on VM1.
VM1 has the effective network security rules shown in the following exhibit:
graphic.
Hot Area:
Correct
Answer:
Box 1:
Rule2 blocks ports 50-60, which includes port 53, the DNS port. Internet users can
reach to the Web server, since it uses port 80.
Box 2:
If Rule2 is removed internet users can reach the DNS server as well.
Note: Rules are processed in priority order, with lower numbers processed before
higher numbers, because lower numbers have higher priority. Once traffic matches a
rule, processing stops. As a result, any rules that exist with lower priorities (higher
numbers) that have the same attributes as rules with higher priorities are not processed.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
Question #56Topic 4
You plan to deploy three Azure virtual machines named VM1, VM2, and VM3. The virtual machines will host a web app named
App1.
You need to ensure that at least two virtual machines are available if a single Azure datacenter becomes unavailable.
What should you deploy?
 A. all three virtual machines in a single Availability Zone

 B. all virtual machines in a single Availability Set
 C. each virtual machine in a separate Availability Zone
 D. each virtual machine in a separate Availability Set
Use availability zones to protect from datacenter level failures.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/manage-availability
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/tutorial-availability-
sets
C (100%)
Question #57Topic 4
You save VM1 as a template named Template1 to the Azure Resource Manager library.
You plan to deploy a virtual machine named VM2 from Template1.
What can you configure during the deployment of VM2?
 A. operating system
 B. administrator username
 C. virtual machine size
 D. resource group Most Voted
When deploying a virtual machine from a template, you must specify:
✑ the Resource Group name and location for the VM
✑ the administrator username and password
✑ an unique DNS name for the public IP
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/ps-template
D (67%)
B (33%)
Question #58Topic 4
You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs a financial reporting app named
App1 that does not support multiple active instances.
At the end of each month, CPU usage for VM1 peaks when App1 runs.
You need to create a scheduled runbook to increase the processor performance of VM1 at the end of each month.
What task should you include in the runbook?
 A. Add the Azure Performance Diagnostics agent to VM1.

 B. Modify the VM size property of VM1. Most Voted
 C. Add VM1 to a scale set.
 D. Increase the vCPU quota for the subscription.
 E. Add a Desired State Configuration (DSC) extension to VM1.
Correct Answer: E �
Reference:
https://docs.microsoft.com/en-us/azure/automation/automation-quickstart-dsc-
configuration
B (100%)
Question #59Topic 4
You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an
Azure Resource Manager template.
You need to ensure that NGINX is available on all the virtual machines after they are deployed.
 A. Deployment Center in Azure App Service

 B. A Desired State Configuration (DSC) extension
 C. the New-AzConfigurationAssignment cmdlet
 D. a Microsoft Intune device configuration profile
Azure virtual machine extensions are small packages that run post-deployment
configuration and automation on Azure virtual machines.
In the following example, the Azure CLI is used to deploy a custom script extension to
an existing virtual machine, which installs a Nginx webserver. az vm extension set \
--resource-group myResourceGroup \
--vm-name myVM --name customScript \
--publisher Microsoft.Azure.Extensions \
--settings '{"commandToExecute": "apt-get install -y nginx"}
Note:
There are several versions of this question in the exam. The question has two correct
answers:
1. a Desired State Configuration (DSC) extension
2. Azure Custom Script Extension
✑ the Publish-AzVMDscConfiguration cmdlet
✑ Azure Application Insights
Reference:
https://docs.microsoft.com/en-us/azure/architecture/framework/devops/automation-
configuration
B (100%)
Question #60Topic 4
HOTSPOT -
You deploy an Azure Kubernetes Service (AKS) cluster that has the network profile shown in the following exhibit.
graphic.
Hot Area:
Correct
Answer:
Box 1: 10.244.0.0/16 -
The Pod CIDR.
Note: The --pod-cidr should be a large address space that isn't in use elsewhere in your
network environment. This range includes any on-premises network ranges if you
connect, or plan to connect, your Azure virtual networks using Express Route or a Site-
to-Site VPN connection.
This address range must be large enough to accommodate the number of nodes that
you expect to scale up to. You can't change this address range once the cluster is
deployed if you need more addresses for additional nodes.
Box 2: 10.0.0.0/16 -
The --service-cidr is used to assign internal services in the AKS cluster an IP address.
Reference:
https://docs.microsoft.com/en-us/azure/aks/configure-kubenet
Question #61Topic 4
HOTSPOT -
You have the App Service plan shown in the following exhibit.
The scale-in settings for the App Service plan are configured as shown in the following exhibit.
The scale out rule is configured with the same duration and cool down tile as the scale in rule.
graphic.
Hot Area:
Correct
Answer:
Box 1: 5 -
The maximum 5 will kept as the CPU Usage >= 30.
Box 2: 3 -
As soon as the average CPU usage drops below 30%, the count will decrease by 1.
After the 5 minute cool-down it will decrease by another 1, reaching 3.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/learn/tutorial-autoscale-
performance-schedule
Question #62Topic 4
You have an Azure virtual machine named VM1 that runs Windows Server 2019. The VM was deployed using default drive settings.
You sign in to VM1 as a user named User1 and perform the following actions:
✑ Create files on drive C.
✑ Create files on drive D.
✑ Modify the screen saver timeout.
✑ Change the desktop background.
You plan to redeploy VM1.
Which changes will be lost after you redeploy VM1?
 A. the modified screen saver timeout

 B. the new desktop background
 C. the new files on drive D
 D. the new files on drive C
Question #63Topic 4

You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit tab.)
You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.
What should you modify on VM1?
 A. the memory
 B. the network adapters
 C. the hard drive
 D. the processor
 E. Integration Services

From the exhibit we see that the disk is in the VHDX format.
Before you upload a Windows virtual machine (VM) from on-premises to Microsoft
Azure, you must prepare the virtual hard disk (VHD or VHDX). Azure supports only
generation 1 VMs that are in the VHD file format and have a fixed sized disk. The
maximum size allowed for the VHD is 1,023 GB. You can convert a generation 1 VM
from the VHDX file system to VHD and from a dynamically expanding disk to fixed-
sized.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/prepare-for-upload-
vhd-image
C (100%)

Az-104 1

Uploaded by

Copyright:

Available Formats

Az-104 1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Az-104 1

Uploaded by

Copyright:

Available Formats

AZ-104

 A. Create Azure Management Groups for each department.

Your company has a Microsoft Azure subscription.

 A. You should only stop one of the VMs.

 A. Stop the VM that includes the data disk.

Your company has an Azure subscription.

Your company has an Azure subscription.

 Hide Solution Discussion 21

Hide Solution Discussion 19

Hide Solution Discussion 25

Hide Solution Discussion 23

Hide Solution Discussion 15

Hide Solution Discussion 6

Hide Solution Discussion 17

 A. Configure a Site-to-Site (S2S) VPN.

Hide Solution Discussion 25

Hide Solution Discussion 32

Community vote distribution

Hide Solution Discussion 7

Hide Solution Discussion 17

Community vote distribution

 A. Run the New-AzureRMVMConfig PowerShell cmdlet.

Hide Solution Discussion 37

Hide Solution Discussion 25

Community vote distribution

Hide Solution Discussion 22

Community vote distribution

 A. You can only recover the files to the infected VM.

Hide Solution Discussion 104

Community vote distribution

 A. You should restore the VM after deleting the infected VM.

Hide Solution Discussion 49

Community vote distribution

 A. Azure Traffic Analytics

Hide Solution Discussion 10

 A. VMs that run Windows 10.

Hide Solution Discussion 28

Topic 2 - Question Set 2

User1 creates a new Azure Active Directory tenant named external.contoso.onmicrosoft.com.

Hide Solution Discussion 175

Hide Solution Discussion 35

User1 creates a new Azure Active Directory tenant named external.contoso.onmicrosoft.com.

Hide Solution Discussion 82

Hide Solution Discussion 109

 A. From contoso.com, modify the Organization relationships settings.

Hide Solution Discussion 48

 A. a Microsoft 365 group that uses the Assigned membership type

Hide Solution Discussion 44

User3 is the owner of Group1.

Hide Solution Discussion 56

You create the Azure policies shown in the following table:

Hide Solution Discussion 129

What is the effect of the policy?

You assign a policy to RG6 as shown in the following table:

To RG6, you apply the tag: RGroup: RG6.

Hide Solution Discussion 100

VNET1: Department: D1, and Label:Value1 only.

You create a new Azure subscription named AZPT2.

 A. VM1, storage1, VNET1, and VM1Managed only