Scribd Logo
Upload

Welcome to Scribd!

  • 70 views

    3e. Classification en 14700

    Uploaded by

    Nur Stya Auliya'uddin
    This document provides classification and chemical composition requirements for welding consumables according to European Standard EN 14700 for hard facing. It lists 17 different alloy designations from Fe1 to Fe16 for iron-based alloys and alloys based on other elements such as nickel, cobalt, copper, aluminum, and chromium. Each alloy listing provides the typical chemical composition ranges in weight percent for the major alloying elements and the typical balance element. It also indicates suitable properties for each alloy type.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    3e. Classification en 14700

    Uploaded by

    Nur Stya Auliya'uddin
    70 views2 pages
    This document provides classification and chemical composition requirements for welding consumables according to European Standard EN 14700 for hard facing. It lists 17 different alloy designations from Fe1 to Fe16 for iron-based alloys and alloys based on other elements such as nickel, cobalt, copper, aluminum, and chromium. Each alloy listing provides the typical chemical composition ranges in weight percent for the major alloying elements and the typical balance element. It also indicates suitable properties for each alloy type.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides classification and chemical composition requirements for welding consumables according to European Standard EN 14700 for hard facing. It lists 17 different alloy designations from Fe1 to Fe16 for iron-based alloys and alloys based on other elements such as nickel, cobalt, copper, aluminum, and chromium. Each alloy listing provides the typical chemical composition ranges in weight percent for the major alloying elements and the typical balance element. It also indicates suitable properties for each alloy type.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    70 views2 pages

    3e. Classification en 14700

    Uploaded by

    Nur Stya Auliya'uddin
    This document provides classification and chemical composition requirements for welding consumables according to European Standard EN 14700 for hard facing. It lists 17 different alloy designations from Fe1 to Fe16 for iron-based alloys and alloys based on other elements such as nickel, cobalt, copper, aluminum, and chromium. Each alloy listing provides the typical chemical composition ranges in weight percent for the major alloying elements and the typical balance element. It also indicates suitable properties for each alloy type.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Classification EN 14700

    Welding consumables for hard-facing

    Hardmelt 600 - EN 14700: E Fe8

    Scope:

    This European Standard (EN 14700) applies to welding consumables for hard facing. The range of application
    includes surfaces of new structural components, semi-finished products as well as the repair of surfaces of
    structural components which have to resist mechanical, chemical, thermal or combined stress.

    This European Standard (EN 14700) specifies requirements for classification of the consumables based on the
    chemical composition of all the weld metal of covered electrodes, cored wires, cored rods, sintered strips, sintered
    rods and metal powders and on the chemical composition of solid wires, solid rods, solid strips and cast rods.

    Symbols for the product form E - covered electrode


    S - solid wire and solid rod
    T - cord wire and cored rod
    R - cast rod E
    B - solid strip
    C - sintered rod, cored strip and sintered strip
    P - metal powder

    3E. CLASSIFICATION EN 14700


    Classification EN 14700
    Welding consumables for hard-facing

    Hardmelt 600 - EN 14700: E Fe8


    Alloy symbols and chemical composition

    Alloy Suitability Chemical composition in % (m/m)


    symbol
    C Cr Ni Mn Mo W V Nb Other Balance
    Fe1 p < 0,4 < 3,5 - 0,5 to 3 <1 <1 <1 - - Fe
    Fe2 p 0,4 to 1,2 <7 <1 0,5 to 3 <1 <1 <1 - - Fe
    Fe3 st 0,2 to 0,5 1 to 8 <5 <3 < 4,5 < 10 < 1,5 - Co, Si Fe
    Fe4 s t (p) 0,2 to 1,5 2 to 6 <4 <3 < 10 < 19 <4 - Co, Ti Fe
    Fe5 cpstw < 0,5 < 0,1 17 to 22 <1 3 to 5 - - - Co, Al Fe
    Fe6 gps < 2,5 < 10 - <3 <3 - - < 10 Ti Fe
    Fe7 cpt < 0,2 4 to 30 <6 <3 <2 - <1 <1 Si Fe
    Fe8 gpt 0,2 to 2 5 to 18 - 0,3 to 3 < 4,5 <2 <2 < 10 Si, Ti Fe
    Fe9 k (n) p 0,3 to 1,2 < 19 <3 11 to 18 <2 - <1 - Ti Fe
    Fe10 c k (n) p z < 0,25 17 to 22 7 to 11 3 to 8 < 1,5 - - < 1,5 Fe Fe
    Fe11 cnz < 0,3 18 to 31 8 to 20 <3 <4 - - < 1,5 Cu Fe
    Fe12 c (n) z < 0,08 17 to 26 9 to 26 0,5 to 3 <4 - - < 1,5 - Fe
    Fe13 g < 1,5 < 6,5 <4 0,5 to 3 <4 - - - B, Ti Fe
    Fe14 g (c) 1,5 to 4,5 25 to 40 <4 0,5 to 3 <4 - - - - Fe
    Fe15 g 4,5 to 5,5 20 to 40 <4 0,5 to 3 <2 - - < 10 B Fe
    Fe16 gz 4 to 7,5 10 to 40 - <3 <9 <8 < 10 < 10 B, Co Fe
    hard
    Fe20 cgtz - - - - - - - - Fe
    metal b
    Ni1 cpt < 0,6 15 to 30 Balance 0,3 to 1 <6 <2 <1 - Si, Fe, B Ni
    Ni2 ckptz 0,6 to 3 15 to 30 Balance < 1,5 < 28 <8 <1 <4 Co, Si, Ti Ni
    Ni3 cpt 1 to 3 1 to 15 Balance 0,3 to 1 <6 <2 <1 - Si, Fe, B Ni
    Ni4 ckptz - 1 to 15 Balance < 1,5 < 28 <8 <1 <4 Co, Si, Ti Ni
    Ni20 cgtz - - - - - - - - - Ni
    Co1 cktz 1 to 5 20 to 30 < 10 0,1 to 2 < 10 < 15 - <1 Fe Co
    Co2 t z (c s) 20 to 35 <4 0,1 to 2 - 4 to 10 - - Fe Co
    Co3 t z (c s) 20 to 35 <4 <2 <1 6 to 14 - - Fe Co
    Al, Fe,
    Cu1 c (n) - <6 < 15 - - - - Cu
    Sn
    Al1 cn - 10 to35 < 0,5 - - - - Cu, Si Al
    Fe, B,
    Cr1 cg Balance - <1 - - 15 to 30 - Cr
    Si, Zr

    Suitability: c: resistance to rusting n: cannot be magnetized t: heat resistance


    g: resistance to abrasion p: impact resistance z: scaling resistance
    k: work hardenable s: edge retention w: precipitation hardened

    ( ) may not apply to all alloys of this type


    a Alloys which are not included in this table are analogies signified, but the letter Z shall be put in front
    b Tungsten fused carbide or tungsten carbide broken or spherical.

    3E. CLASSIFICATION EN 14700

    You might also like