3020-Plataforma 3020

All rights reserved by CNHi.
The information contained in this catalogue is intended to be of a general nature only. CNHi. may at any time
and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the
product described in this catalogue.
To be sure of getting accurate, detailed and up-to-date infor mation, an intending buyer should consult his nearest
CNHi. dealer or distributor.
Single item numeration method used in this catalogue may not be used without written consent from CNHi.
© 2014 CNHi
31.220.AD 01 p1 10/2014
VAR - 123782, 789101,987654 - PTO - D650
4 10.110.EF
2 11
3
3 31.220.AG 4
10
8
9 4
14
7 12
2
13
6 1
5
7 8
STANDARD 6
23 9 10 31.220.AD 01 p1 10/2014
VAR - 123782, 789101,987654 - PTO - D650

11 12 13 14
REF FN PART NUMBER YR/SN QTY DESCRIPTION
1 1 86529340 1 SHAFT PTO, Incl 2 - 11

20
2 84014007 1 YOKE, Incl 4 -7 7
15
3 NSS 1 NOT SERVICED SEPARATELY, SHAFT, 350mm, Incl in 1

16
4 84004292 1 KIT, Seal Kit, Incl 6, 7
17
4 {84058743} 1 KIT
KIT, Seal Kit, Incl 6, 7
2 18 19 21 22
1 = FOR ITALY ONLY 5
MODELS 1
1 Model Number and Model Description
2 Reference - Figure call-out of the part number.
3 Parts supplied in repair kits per symbol reference.
4 Part illustrated on the Page or in the Figure indicated, or calls for

31.220.AD Variations or Details.Indicates components shown in detail elsewhere
in the catalogue under the figure number shown.
5 Footnote references
6 Figure notes
7 1 2 Includes item(s) ...... (See Description within partlist).
8 Orientation. (Arrow indicates front of the machine).
9 Figure description.
10 General information of the figure.
11 Figure title number that aligns with the SRT. Standard Repair Time.
12 Sequence code within the assembly.
13 Page number within the sequence code.
14 Date of printing or updating of page (month-year).
15 Note - Relating to the Part Number. There is a key to symbols and

abbreviations at the bottom of the text page.
16 Non-serviced parts.
17 Further description of the part to help confirm identification.
18 Not available as service part.
19 Part Number.
20 To be defined.
21 Total Quantity of the Part referred to in the page.

The quantity can be replaced by the following indications:
AR = quantity as requested.
22 Part Description.
23 Variant Codes
-7-
TABLE OF CONTENTS
35.410.01 HYDRAULIC SYSTEM, MULTI-COUPLER AND HARDWARE
35.410.02 01 STANDARD HYDRAULIC SYSTEM, 25 FOOT HEADER
35.410.02 02 STANDARD HYDRAULIC SYSTEM, 30 AND 35 FOOT HEADER
35.410.03 HYDRAULICS, REEL ARMS
35.410.04 01 SUSPENSION, CUTTERBAR, STANDARD
35.410.04 02 SUSPENSION, CUTTERBAR, IN-CAB ADJUST OPTION
35.410.04 03 SUSPENSION, CUTTERBAR, STANDARD, DD
35.410.04 04 SUSPENSION, CUTTERBAR, IN-CAB ADJUST, DD
35.410.05 HYDRAULIC CUTTERBAR SUSPENSION, 25, 30, 35 FOOT HEADER
35.410.06 MANIFOLD, HYDRAULIC SYSTEM
55.100.01 HARNESS, FLEX HEADER, MOUNTING
55.100.02 HARNESS, FLEX HEADER
55.100.03 HARNESS, ADAPTER KIT
55.404.01 LIGHT ASSEMBLY, WARNING
58.100.01 01 MAIN DRIVE
58.100.01 02 MAIN DRIVE
58.100.02 REEL DRIVE
58.100.03 BELT DRIVE, WOBBLE BOX, LH, SINGLE AND DOUBLE DRIVE
58.100.04 BELT DRIVE, WOBBLE BOX, RH, DOUBLE DRIVE ONLY
58.101.01 REEL ARMS
58.101.02 01 REEL ADAPTER
58.101.02 02 REEL, ADAPTER, DD
58.101.03 KIT, REEL TINE FLAP
58.101.04 01 PICKUP REEL, STEEL TINES
58.101.04 01.1 PICK-UP, REEL, TINE STEEL
58.101.04 02 PICKUP REEL, PLASTIC TINES
58.101.05 PLASTIC TINES, PICKUP REEL, 6 BAT
58.101.05 01 KIT, REEL PACKAGE
58.101.05 02 KIT BEARING REEL ARM
58.101.06 STEEL TINES, PICKUP REEL, 6 BAT
58.101.07 HUB, REEL, MOUNTING PARTS
58.105.01 CONTROL ASSEMBLY, HEADER HEIGHT
58.105.01 01 CONTROL ASSEMBLY, HEADER HEIGHT
58.105.01 02 CONTROL ASSEMBLY, HEADER HEIGHT, DOUBLE DRIVE

TABLE OF CONTENTS
58.110.01 STRIPPER
58.110.01 STRIPPER, ASSY
58.110.02 01 THIRD STRIPPER KIT
58.110.02 02 THIRD STRIPPER KIT, DD
58.110.03 SEGMENTED KNIFE ASSY
58.110.03 01 KNIFE ASSEMBLY, 3 INCH
58.110.03 01 KNIFE ASSEMBLY, SPARES, 3 INCH
58.110.03 02 KNIFE ASSEMBLY SEGMENTED
58.110.03 02 KNIFE ASSEMBLY, SPARES, FINE, DD
58.110.03 03 KNIFE ASSEMBLY, SPARES, COARSE, DD
58.110.03 04 KNIFE ASSY, SPARES, DD, RH
58.110.03 05 KNIFE ASSY, SPARES, DD, LH
58.110.03 06 KNIFE ASSY, SEGMENT, LH, COARSE
58.110.03 07 KNIFE ASSY, SEGMENT, RH, COARSE
58.110.04 01 CUTTERBAR, 3 INCH STANDARD GUARD, SINGLE DRIVE
58.110.04 02 CUTTERBAR, 3-INCH, STANDARD GUARD, DD
58.110.04 02 CUTTERBAR, 3-INCH, STANDARD GUARD, DOUBLE DRIVE
58.110.04 03 CUTTERBAR, SHORT GUARD, SINGLE DRIVE
58.110.04 03 STANDARD GUARD ASSY, SINGLE DRIVE
58.110.04 04 CUTTERBAR, STUB GUARD, DOUBLE DRIVE
58.110.04 04 STANDARD GUARD ASSY, DOUBLE DRIVE
58.110.04 05 CUTTERBAR, SHORT GUARD, DOUBLE DRIVE
58.110.04 06 KIT CUTTERBAR ANGLE REDUCTION 30FT, 35FT
58.110.05 01 WOBBLE BOX ASSEMBLY, RH, DOUBLE DRIVE ONLY
58.110.05 02 WOBBLE BOX ASSEMBLY, LH, SINGLE AND DOUBLE DRIVE
58.110.05 03 WOBBLE BOX
58.110.05 06 SHAFT, PTO 21 TOOTH
58.110.06 08 KIT CENTER SECTION OVERLAP

TABLE OF CONTENTS
58.110.06 09 KIT POLY SKID SHOE COMPLETE 30 FT DOUBLE DRIVE
58.110.06 10 KIT POLY SKID SHOE COMPLETE 35 FT SINGLE DRIVE
58.110.06 11 KIT, SKID/SHOE POLY 30FT BEFORE MY 2020
58.120.01 AUGER ASSEMBLY
58.120.01 01 KIT AUGER FINGER DELUXE
58.120.01 02 KIT AUGER FINGER PAIR STANDARD
58.120.01 03 KIT 150 TINES WITH SCREWS
58.120.02 DIA KIT, AUGER, LOW RPM
58.130.01 01 FLOOR SUPPORT
58.130.02 01 ARM, FLOOR SUPPORT, RH
58.130.02 02 ARMS, FLOOR SUPPORT, LH
58.130.03 01 FLOOR ASSEMBLY, SINGLE DRIVE
58.130.03 03 FLOOR, ASSY, CUTTERBAR ASSY, SINGLE DRIVE
58.130.03 2 FLOOR, ASSY, DOUBLE DRIVE
58.130.04 01 FLOOR, ASSY, RH
58.130.04 02 FLOOR, ASSY, OUTER RH
58.130.04 03 FLOOR, ASSY, CENTER
58.130.04 04 FLOOR, ASSY, LH
58.130.04 05 FLOOR, ASSY, LH END
58.130.04 06 TOOL BOX, ASSY
58.131.01 01 DIVIDER ASSEMBLY, LEFT HAND
58.131.01 02 DIVIDER ASSEMBLY, LONG, LEFT HAND
58.131.02 01 DIVIDER ASSEMBLY, RIGHT HAND
58.131.02 02 DIVIDER ASSEMBLY, LONG, RIGHT HAND
58.131.02 03 DIVIDER, ASSY, RIGHT HAND, DOUBLE DRIVE
58.131.03 DIVIDER ASSEMBLY, EXTENDED
58.131.04 AHHC SENSOR/FEELER NARROW, ASSEMBLY
58.131.05 AHHC SENSOR/FEELER WIDE, ASSEMBLY
58.131.05 01 KIT ARM PLASTIC HHC ARMS
58.145.01 SENSORS, REEL POSITION

TABLE OF CONTENTS
58.208.01 01 END SHIELDING, RIGHT HAND
58.208.01 02 END SHIELDING, RIGHT HAND, DD
58.208.02 END SHIELDING, LEFT HAND
58.208.03 WEAR PLATES
58.208.04 01 SHOE, SKID ASSY, SD/DD NARROW
58.208.04 02 SHOE, SKID ASSY, DD RH
58.500.01 MAIN SHAFT, SINGLE DRIVE
58.500.01 02 MAIN SHAFT - DD
58.500.02 SHAFT, POWER TAKE-OFF
58.500.02 01 SHAFT, PTO, ASN YGH231300
58.500.03 PTO, 6 TEETH
58.500.04 KIT, STD GUARD SINGLE DR 30FT
58.500.05 KIT STD GUARD SINGLE DR 35FT
58.500.08 KIT STD GUARD DOUBLE DR 35FT
58.500.09 KIT STD GUARD SINGLE DRIVE 35FT
58.500.10 STD GUARD DOUBLE DR 30FT
58.500.11 KIT STANDARD GUARD SINGLE DRIVE 25FT.
58.500.12 PTO SHAFT HALF 1 3/8
88.035.01 DIA KIT, CUTTERBAR SUSPENSION, OPTIONAL, DD
88.058.01 DIA KIT, LONG DIVIDER
88.058.02 KIT, CONVERSION FOR 21/23/2500 COMBINES
88.058.03 DIA KIT, THIRD STRIPPER 20FT
88.058.04 DIA, KIT, SUSPENSION SINGLE DRIVE
88.058.05 01 DIA KIT, AHHC 20FT - 25FT, SINGLE DRIVE
88.058.05 03 DIA KIT, AHHC 30FT - 35FT, DOUBLE DRIVE
88.058.05 04 KIT RIGID HHC AUGER 20-25 FT
88.058.07 DIA KIT, THIRD STRIPPER KIT, SD/DD
88.058.08 DIA KIT, CROPLIFTERS, STANDARD GUARD, SD/DD
88.058.10 DIA KIT, AUGER FLIGHT EXTENSION, PRIMARY, SD/DD
88.058.11 DIA KIT, CENTER FLIGHT EXTENSION, SECONDARY, SD/DD
88.058.12 01 CUTTER BAR REBUILD KIT STD GUARD SINGLE DR 20FT W/KNIFE
TABLE OF CONTENTS
88.058.12 02 CUTTER BAR REBUILD KIT STUB DRIVE SINGLE DRIVE 20 FT W/KNIFE
88.058.12 02 CUTTER BAR REBUILD KIT STUB GUARD SINGLE DR 30FT W/KNIFE
88.058.12 02 CUTTER BAR REBUILD KIT STUB GUARD SINGLE DRIVE 25FT W/KNIFE
88.058.12 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DR 30FT W/KNIFE
88.058.12 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/KNIFE
88.058.12 04 CUTTER BAR REBUILD KIT STD GUARD DOUBLE DR 30FT W/KNIFE
88.058.13 01 CUTTER BAR REBUILD KIT STD GUARD SINGLE DR 30FT W/O KNIFE
88.058.13 01 CUTTER BAR REBUILD KIT STD GUARD SINGLE DRIVE 25FT W/O KNIFE
88.058.13 01 CUTTER BAR REBUILD KIT STD. GUARD SINGLE DRIVE 20FT WITHOUT KNIFE
88.058.13 02 CUTTER BAR REBUILD KIT STUB GUARD SINGLE DRIVE 20FT W/O KNIFE
88.058.13 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 30FT W/O/ KNIFE
88.058.13 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/O KNIFE
88.058.13 04 CUTTER BAR REBUILD KIT STD GUARD DOUBLE DRIVE 30FT W/O KNIFE
88.058.16 KIT MAINT. FLEX HEADER SINGLE DRIVE
88.058.17 KIT MAINT. FLEX HEADER DOUBLE DRIVE
88.058.18 TOOL BOX
88.058.19 DIA KIT, CROP LIFTERS AND SUPPORT
88.058.20 KIT POLY POINT
88.058.21 KIT HHC WIRE HARNESS CLAMPS
88.058.22 KIT 3000 SERIES WOBBLEBOX OVERHAUL
88.058.23 KIT DIVIDER ASSY LH CIH
88.058.24 KIT DIVIDER ASSY RH
88.058.25 KIT CROP DEFLECTOR
88.058.26 KIT, SUGER SWEEPER

TABLE OF CONTENTS
88.058.27 KIT RIGID HHC AUGER DD 30-35 FT
88.058.27 01 KIT RIGID HHC KIT AUGER SD 30-35
88.058.28 KIT, LOW FLOOR ASSY 20 - 25 FT
88.058.30 KIT, CUTTERBAR ANGLE REDUCTION 20FT 25FT
88.058.31 KIT, SUSPENSION DLX 35 SD RED
88.058.35 KIT, SUSPENSION DLX 35 DD RED
88.058.37 KIT, KNIFE SPEED 500RPM
88.058.38 KIT, SKID/SHOE UPGRADE DUAL DRIVE
88.058.39 KIT, SKID/SHOE UPGRADE SINGLE DRIVE
88.058.40 AA KIT, SKID/SHOE POLY
90.108.01 DECALS
90.108.02 DECALS - GENERAL INSTRUCTIONS
90.108.03 DECALS - CAUTION, WARNING, AND DANGER
90.108.04 DECALS TRI-STRIPE MY 21 AND AFTER
90.108.05 DECALS TERRA STRIPE

SECTION INDEX
HYDRAULIC SYSTEMS
35.410.01 HYDRAULIC SYSTEM, MULTI-COUPLER AND HARDWARE
35.410.02 01 STANDARD HYDRAULIC SYSTEM, 25 FOOT HEADER
35.410.02 02 STANDARD HYDRAULIC SYSTEM, 30 AND 35 FOOT HEADER
35.410.03 HYDRAULICS, REEL ARMS
35.410.04 01 SUSPENSION, CUTTERBAR, STANDARD
35.410.04 02 SUSPENSION, CUTTERBAR, IN-CAB ADJUST OPTION
35.410.04 03 SUSPENSION, CUTTERBAR, STANDARD, DD
35.410.04 04 SUSPENSION, CUTTERBAR, IN-CAB ADJUST, DD
35.410.05 HYDRAULIC CUTTERBAR SUSPENSION, 25, 30, 35 FOOT HEADER
35.410.06 MANIFOLD, HYDRAULIC SYSTEM

35.410.01 p1 6/2021
HYDRAULIC SYSTEM, MULTI-COUPLER AND HARDWARE

35.410.01 p1 6/2021
1 353308 1 NUT Hex, M6 x 1

2 43118 1 BOLT Hex, M6 x 1.0 x 40mm, Cl 8.8
3 86603051 2 HYD CONNECTOR 1" - 14 ORFS x 3/4" - 16 ORB 3/4"-16 x 1"-
14
4 84139301 1 HYD TUBE 16.00 mm OD Header Hydraulic System
5 87654201 1 HYD TUBE .625" OD Header Hydraulic System
6 84431473 2 HYD CONNECTOR 1"-14 ORFS
7 86978770 4 UNION 11/16"-6, ORFS
8 84431546 4 UNION 11/16"-16 ORFS
9 86579673 1 HYD CONNECTOR 11/16" - 16 ORFS x M18 x 1.5 ORB
10 84062491 1 HYD CONNECTOR 11/16"-16 M ORFS x M18 x 1.5 Fem
11 385686 1 ORIFICE Valve Restrictor
12 9840570 2 ELBOW 90 Degree, 13/16"-16 ORFS
13 9993143 3 HYD CONNECTOR 11/16" - 16 ORFS x 9/16" - 18 ORB
14 84206574 1 RESTRICTOR Valve
15 433101 1 SUPPORT
16 623303 4 WASHER 10.32mm ID x 47.63mm OD x 4.76mm Thk
17 322358 8 BELLEVILLE WASHER M8 Bolt Size x 18mm OD x 1.4mm Thk
18 43127 4 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
19 140020 4 WASHER 17.5mm ID x 30mm OD x 3mm Thk
20 87010704 4 BHD LOCK NUT 11/16"-16
21 86512138 4 HEX SOC SCREW M8 x 20mm, Cl 12.9
22 9706690 4 NUT M8 x 1.25, Cl 8
23 433008 2 CLAMP
24 84434997 1 COUPLING Quick, Inc. 25-29
25 84435044 1 KIT Protection
26 86623901 1 HANDLE Quick Coupling
3020-20-FLEXIBLE GRAIN HEADER 3020-25-FLEXIBLE GRAIN

HEADER 3020-30-FLEXIBLE GRAIN HEADER 3020-35-FLEXIBLE
GRAIN HEADER
35.410.01 p2 6/2021

35.410.01 p2 6/2021
27 86623902 1 LATCH Quick Coupling

28 84435046 2 COUPLING Female, (Not Shown)
29 84435047 3 QUICK FEMALE COUPLING (Not Shown)

GRAIN HEADER
35.410.02 01 p1 6/2021
STANDARD HYDRAULIC SYSTEM, 25 FOOT HEADER

35.410.02 01 p1 6/2021
STANDARD HYDRAULIC SYSTEM, 25 FOOT HEADER
1 87654196 2 HYD TUBE .375" OD Header Hydraulic System Side

2 84139195 1 HYD TUBE 8.00 mm OD x 5989.80 mm L Header Hydraulic
System Side
3 84139193 1 HYD TUBE 8.00 mm OD Header Hydraulic System Lift
4 84146810 1 HYD TUBE 16 mm OD Header Hydraulic System Reel Drive
5 84140859 6 BRACKET Hydraulic Tube Clamps
6 430357 24 CLAMP Hydraulic Tubes
7 84146790 1 HYD TUBE 8 mm OD x 1641.20 mm L Header Hydraulic System
Side
8 84146787 1 HYD TUBE 8 mm OD Header Hydraulic System Lift
9 431941 6 SUPPORT Hydraulic Tube Clamps
10 84814948 4 SUPPORT Hydraulic Tube Clamps
11 430356 8 CLAMP Hydraulic Tubes
12 84146803 1 HYD TUBE 8 mm OD Header Hydraulic System
13 84139174 1 HYD TUBE 16.00 mm OD Header Hydraulic System Reel Drive
14 353308 10 NUT Hex, M6 x 1
15 86512419 6 CARRIAGE BOLT Sq Nk, M6 x 70mm, Cl 8.8
16 84431546 4 UNION 11/16"-16 ORFS
17 412364 4 CARRIAGE BOLT M6 x 1.0 x 56.6mm, Cl 8.8
3020-25-FLEXIBLE GRAIN HEADER

35.410.02 02 p1 6/2021
STANDARD HYDRAULIC SYSTEM, 30 AND 35 FOOT HEADER

35.410.02 02 p1 6/2021
1 84140859 8 BRACKET Hydraulic Tube Clamps, 30 Foot Header

1 84140859 9 BRACKET Hydraulic Tube Clamps, 35 Foot Header
2 430356 10 CLAMP Hydraulic Tubes, 30 Foot Header
4 84814948 5 SUPPORT Hydraulic Tube Clamps, 30 Foot Header
7 84146726 1 HYD TUBE 8 mm OD x 1493 mm L Header Hydraulic System,
30 Foot Header
7 87654200 1 HYD TUBE 8 mm OD x 3017 mm L Header Hydraulic System,
35 Foot Header
9 84146722 1 HYD TUBE 8 mm DIA Header Hydraulic System, 30 Foot
Header
9 87654198 1 HYD TUBE .375" OD Header Hydraulic System, 35 Foot Header

HEADER
35.410.02 02 p2 6/2021

35.410.02 02 p2 6/2021
10 84146748 1 HYD TUBE 8 mm OD x 4486, 106 mm L Header Hydraulic

System, 30 Foot Header
10 87654194 1 HYD TUBE .375" OD Header Hydraulic System, 35 Foot Header
11 84146753 1 HYD TUBE 8 mm OD x 730.50 mm L Header Hydraulic System,
30 Foot Header
11 84139191 1 HYD TUBE 16.00 mm OD x 2000.80, 40 mm L Header Hydraulic
12 84146743 1 HYD TUBE 16 mm OD x 719.30 mm L Header Hydraulic
15 84146729 1 HYD TUBE 16 mm OD x 1238.80, 40 mm L Header Hydraulic
15 84139188 1 HYD TUBE 16.00 mm OD x 2000.80, 40 mm L Header Hydraulic
17 84146757 1 HYD TUBE 8 mm OD x 3165.20 mm L Header Hydraulic
17 84138467 1 HYD TUBE 8 mm OD, 4689.2 mm Length Header Hydraulic
System
19 353308 13 NUT Hex, M6 x 1 30 Foot Header
19 353308 15 NUT Hex, M6 x 1 35 Foot Header

HEADER
35.410.02 02 p3 6/2021

35.410.02 02 p3 6/2021
20 84431473 2 HYD CONNECTOR 1"-14 ORFS

21 86512419 8 CARRIAGE BOLT Sq Nk, M6 x 70mm, Cl 8.8 30 Foot Header
22 412364 5 CARRIAGE BOLT M6 x 1.0 x 56.6mm, Cl 8.8 30 Foot Header
22 412364 6 CARRIAGE BOLT M6 x 1.0 x 56.6mm, Cl 8.8 35 Foot Header
23 84431546 5 UNION 11/16"-16 ORFS

HEADER
35.410.03 p1 6/2021
HYDRAULICS, REEL ARMS

35.410.03 p1 6/2021
1 87647112 1 HYDRAULIC CYLINDER Double Acting, 32mm Rod, 380mm

Stroke Left Hand Reel Arm, Reel Raise/Lower Left Hand
1 1 47466444 1 HYDRAULIC CYLINDER Right Hand Reel Arm, Reel
Raise/Lower Right hand
1 51593592 1 HYDRAULIC CYLINDER Lift Arm Reel
2 47808889 1 SEAL KIT Stamped SERTA (SB) On Cylinder, 87647112
Cylinder.
2 84023914 1 SEAL KIT Stamped SERTA (SB) On Cylinder, For Cylinder
47466444 marked SV or SB
2 84141839 1 SEAL KIT Stamped BSPB For Burnside On Cylinder
2 84139388 1 SEAL KIT Stamped M For Monarch On Cylinder Or SERTA,
Will Also Need 10118611 Plug. 47466444 Cylinder.
2 90403434 1 SEAL KIT USED ON CYLINDER 51539350
2 90403432 1 SEAL KIT USED ON CYLINDER 51593592
3 10118611 1 PLUG M12 x 1.5 x 15.00mm, Cl 5.8 For Monarch Cylinder, Incl
40
3 47799035 AR SCREW For Serta or Burnside Cylinder
4 354131 2 BOLT Eye
5 84471716 1 HYDRAULIC CYLINDER Right Hand Reel Arm
6 48103679 1 SEAL KIT Stamped SERTA (SB) On Cylinder
6 84139383 1 SEAL KIT Stamped M For Monarch On Cylinder
7 47466435 1 HYDRAULIC CYLINDER Right Hand Reel Arm
(1) Applies To MY14 And Newer Units

GRAIN HEADER
35.410.03 p2 6/2021

35.410.03 p2 6/2021

9 84471715 1 HYDRAULIC CYLINDER Left Hand Reel Arm, Reel Fore/Aft
9 87715949 1 HYDRAULIC CYLINDER Double Acting, 20mm Rod, 400mm
Stroke
11 86566989 4 CABLE TIE 208mm L, Nylon, Black CABLE STRAP
12 140229 6 WASHER
13 10717511 2 THIN NUT Thin, M16 x 2, Cl 04
14 430357 10 CLAMP
15 431941 5 SUPPORT
16 433008 2 CLAMP
17 442340 1 SUPPORT
18 87723829 2 PIN 25mm OD x 96mm L
19 87016613 4 WASHER 25.8mm ID x 56.5mm OD x 6mm Thk
20 370002 2 CIRCLIP M25, External
21 84134795 2 WASHER 25.3mm ID x 44mm OD x 3.72mm Thk
22 86580178 1 ELBOW 90 Deg, 11/16-16 ORFS x M12 x 1.5 ORB
23 87683553 1 HOSE 6.35mm ID x 1360mm L, SAE 100R16 Right Hand Reel
Arm

GRAIN HEADER
35.410.03 p3 6/2021

35.410.03 p3 6/2021
24 86580177 6 HYD CONNECTOR 11/16"-16 ORFS x M12 x 1.5 ORB

25 84151314 2 HOSE 6.35mm ID x 1000mm L Right And Left Hand Reel Arm
Hydraulic Cylinder
26 84151317 2 HOSE 6.35mm ID x 1400mm L Right And Left Hand Reel Arm
Hydraulic Cylinder
27 87676380 2 HOSE 6.35mm ID x 950mm L, SAE 100R16 Right And Left
Hand Reel Arm Hydraulic Cylinder
28 120061 2 BOLT Hex, M8 x 60mm L, Cl 8.8
29 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8
30 86977790 6 BOLT Hex, M6 x 1.0 x 45mm, Cl 8.8
32 353308 2 NUT Hex, M6 x 1
33 86000441 2 LOCK NUT M16 x 2.0, Cl 8
34 325829 2 BOLT Hex, M10 x 1.5 x 45mm, Cl 8.8
35 100037 2 LOCK NUT M10 x 1.5, Cl 8
36 86624981 2 BOLT Hex, M12 x 85mm, Cl 8.8
37 100038 2 LOCK NUT M12 x 1.75, Cl 8
38 86511324 4 WASHER 13mm ID x 24mm OD x 2.5mm Thk
39 43874 2 BOLT Hex, M16 x 110, 8.8
40 86598098 AR O-RING 2.2mm Thk x 9.3mm ID, Cl 6, 90 Duro For Monarch
Cylinder
40 47799036 AR WASHER For Serta or Burnside Cylinder

GRAIN HEADER
35.410.04 01 p1 6/2021
SUSPENSION, CUTTERBAR, STANDARD

35.410.04 01 p1 6/2021
1 84235768 7 ARM 25 Foot Header

2 84390188 7 ADJUSTER 25 Foot Header
3 84191219 1 HYD TUBE Cutterbar Suspension
4 87661737 1 HYD TUBE Cutterbar Suspension
5 84167485 1 HYD TUBE 8.00 mm OD Cutterbar Suspension
6 84129438 2 SPACER 24mm ID x 39mm OD x 29mm L
7 453133C1 7 PLUG Connector
8 225297C1 1 ELEC CONNECTOR
9 225318C1 2 ELEC CONNECTOR 2 Pin
10 84235826 7 EYEBOLT M16 x 2, 25 Foot Header
11 9503184 7 CLEVIS PIN M16 x 50 25 Foot Header
12 86511326 7 WASHER 17mm ID x 30mm OD x 3mm Thk 25 Foot Header
13 130007 7 COTTER PIN M4 x 25 25 Foot Header
14 412687 7 COTTER PIN 6.3mm OD x 32mm OAL 25 Foot Header

GRAIN HEADER
35.410.04 01 p2 6/2021

35.410.04 01 p2 6/2021

15 225315C1 2 ELEC CONNECTOR Male, 2 Pin

GRAIN HEADER
35.410.04 02 p1 6/2021
SUSPENSION, CUTTERBAR, IN-CAB ADJUST OPTION

35.410.04 02 p1 6/2021
1 86511326 8 WASHER 17mm ID x 30mm OD x 3mm Thk 25 Foot

2 84323744 2 SUPPORT
3 84248754 8 BRACKET 25 Foot
3 84248754 10 BRACKET 30 Foot
3 84248754 12 BRACKET 35 Foot
4 84235768 8 ARM 25 Foot
4 84235768 10 ARM 30 Foot
4 84235768 12 ARM 35 Foot
5 84343827 1 CHANNEL
6 84126918 1 TORSION SPRING 19.2mm ID x 80.5mm OD x 101.22mm L
7 84322612 8 BRACKET 25 Foot, Inc. 43, 44
7 84322612 10 BRACKET 30 Foot, Inc. 43, 44
7 84322612 12 BRACKET 35 Foot, Inc. 43, 44
8 84335949 1 ADJUSTING PLATE
11 84416268 1 ADJUSTING PLATE 25 Foot
12 84427633 1 MOUNTING PLATE
13 47710020 2 BUSHING Hex
14 87736132 1 SHAFT Hex
15 84251484 1 SHAFT Hex
16 370003 10 SNAP RING M30, External 30 Foot
17 84398437 10 TURNBUCKLE 30 Foot

GRAIN HEADER
35.410.04 02 p2 6/2021

35.410.04 02 p2 6/2021

18 84247642 10 BALL JOINT 30 Foot
18 84247642 12 BALL JOINT 35 Foot
19 84283454 12 BALL JOINT Left Hand, 30 Foot
18 84247642 12 BALL JOINT 25 Foot
21 84126961 1 INDICATOR
22 84389900 1 DECAL Indicator
23 84252590 4 PIN
24 84264006 8 PIN 30 Foot
24 84264006 8 PIN 35 Foot
25 130007 10 COTTER PIN M4 x 25 30 Foot
24 84264006 4 PIN 25 Foot
27 412687 12 COTTER PIN 6.3mm OD x 32mm OAL 30 Foot
28 9503184 10 CLEVIS PIN M16 x 50 30 Foot
30 86633356 16 CARRIAGE BOLT M10 x 1.5 x 25mm, Cl 8.8 30 Foot

GRAIN HEADER
35.410.04 02 p3 6/2021

35.410.04 02 p3 6/2021
31 87646163 8 CARRIAGE BOLT Short Sq Nk, M10 x 1.5 x 100mm, Cl 8.8

32 43139 20 BOLT M10 x 1.5, 25mm L Cl8.8 Full Thread 30 Foot
33 395277 3 BOLT Hex, M12 x 1.75 x 130mm, Cl 8.8
34 9706687 4 BOLT M12 x 1.75 x 30mm, Cl 8.8
35 323866 10 BOLT Hex, M16 x 2.0 x 60mm, Cl 8.8 30 Foot
36 120092 2 BOLT M16 x 70mm, Cl 8.8
38 86500689 24 NUT M10 x 1.5, Cl 10 30 Foot
38 86500689 26 NUT M10 x 1.5, Cl 10 35 Foot
39 337475 7 NUT M12, Cl 10
40 86000441 12 LOCK NUT M16 x 2.0, Cl 8 30 Foot
42 140045 44 BELLEVILLE WASHER 10mm ID x 22mm OD x 1.6mm Thk 30
Foot
Foot

GRAIN HEADER
35.410.04 02 p4 6/2021

35.410.04 02 p4 6/2021

44 896-11022 4 WASHER 24mm ID x 44mm OD x 4mm Thk
38 86500689 22 NUT M10 x 1.5, Cl 10 25 Foot
41 14497531 8 WASHER 31mm ID x 56mm OD x 4mm Thk 31 x 56 x 4 mm, 25
Foot
Foot
Foot
Foot
43 210022 1 BUSHING (Not Shown)
44 382974 2 BUSHING 20h8mm ID x 23H7mm OD x 15mm L (Not Shown)

GRAIN HEADER
35.410.04 03 p1 6/2021
SUSPENSION, CUTTERBAR, STANDARD, DD

35.410.04 03 p1 6/2021
SUSPENSION, CUTTERBAR, STANDARD, DD
1 84235768 8 ARM
1 84235768 10 ARM
2 84390188 8 ADJUSTER
2 84390188 10 ADJUSTER
3 84191219 1 HYD TUBE
4 87661737 1 HYD TUBE
5 84167485 1 HYD TUBE 8.00 mm OD
7 86579673 1 HYD CONNECTOR 11/16" - 16 ORFS x M18 x 1.5 ORB
8 385686 1 ORIFICE
9 84062491 1 HYD CONNECTOR 11/16"-16 M ORFS x M18 x 1.5 Fem
10 84235826 8 EYEBOLT
10 84235826 10 EYEBOLT
11 9503184 8 CLEVIS PIN M16 x 50
11 9503184 10 CLEVIS PIN M16 x 50
12 86511326 8 WASHER 17mm ID x 30mm OD x 3mm Thk
13 130007 8 COTTER PIN M4 x 25
13 130007 10 COTTER PIN M4 x 25
14 412687 8 COTTER PIN 6.3mm OD x 32mm OAL
17 225318C1 2 ELEC CONNECTOR 2 Pin
18 225297C1 1 ELEC CONNECTOR
19 453133C1 7 PLUG
20 86566989 2 CABLE TIE 208mm L, Nylon, Black

HEADER
35.410.04 04 p1 6/2021
SUSPENSION, CUTTERBAR, IN-CAB ADJUST, DD

35.410.04 04 p1 6/2021
1 84351894 1 SUSPENSION
2 84323744 2 SUPPORT
3 84248754 10 BRACKET
3 84248754 12 BRACKET
4 84235768 10 ARM
4 84235768 12 ARM
5 84343827 2 CHANNEL
6 84126918 2 TORSION SPRING 19.2mm ID x 80.5mm OD x 101.22mm L
7 84322612 10 BRACKET
7 84322612 12 BRACKET
13 84271863 4 BUSHING
14 87736132 2 SHAFT
15 84251484 1 SHAFT
16 370003 10 SNAP RING M30, External
16 370003 12 SNAP RING M30, External
17 84398437 10 TURNBUCKLE
17 84398437 12 TURNBUCKLE
18 84247642 10 BALL JOINT
18 84247642 12 BALL JOINT
19 84283454 10 BALL JOINT
19 84283454 12 BALL JOINT

HEADER
35.410.04 04 p2 6/2021

35.410.04 04 p2 6/2021

21 84126961 1 INDICATOR
22 84389900 1 DECAL
23 84252590 4 PIN
24 84264006 6 PIN
24 84264006 8 PIN
25 130007 10 COTTER PIN M4 x 25
25 130007 12 COTTER PIN M4 x 25
26 412686 10 COTTER PIN M5 x 32
26 412686 12 COTTER PIN M5 x 32
28 9503184 10 CLEVIS PIN M16 x 50
28 9503184 12 CLEVIS PIN M16 x 50
29 86633356 22 CARRIAGE BOLT M10 x 1.5 x 25mm, Cl 8.8
31 43139 20 BOLT M10 x 1.5, 25mm L Cl8.8 Full Thread
32 395277 6 BOLT Hex, M12 x 1.75 x 130mm, Cl 8.8
33 9706687 4 BOLT M12 x 1.75 x 30mm, Cl 8.8
34 323866 10 BOLT Hex, M16 x 2.0 x 60mm, Cl 8.8
34 323866 12 BOLT Hex, M16 x 2.0 x 60mm, Cl 8.8
35 120092 2 BOLT M16 x 70mm, Cl 8.8
36 86500689 30 NUT M10 x 1.5, Cl 10
36 86500689 32 NUT M10 x 1.5, Cl 10
37 337475 10 NUT M12, Cl 10
38 86000441 12 LOCK NUT M16 x 2.0, Cl 8

HEADER
35.410.04 04 p3 6/2021

35.410.04 04 p3 6/2021
38 86000441 14 LOCK NUT M16 x 2.0, Cl 8

39 87613254 10 WASHER 1.27" ID x 1.88" OD x 0.05" Thk
40 140045 50 BELLEVILLE WASHER 10mm ID x 22mm OD x 1.6mm Thk

HEADER
35.410.05 p1 6/2021
HYDRAULIC CUTTERBAR SUSPENSION, 25, 30, 35 FOOT HEADER

35.410.05 p1 6/2021
1 NSS 1 NOT SOLD SEPARAT MANIFOLD, Hydraulic

2 84210572 1 HYDRAULIC CYLINDER Double Acting, 38.1mm Rod, 130mm
Stroke
2 84412621 1 SEAL KIT
3 84210573 1 HYDRAULIC CYLINDER Double Acting, 28.57mm Rod, 130mm
Stroke
3 84412622 1 SEAL KIT Not Shown
4 84328549 1 BRACKET
5 84345689 1 BRACKET
6 84424278 1 HYD TUBE Hydraulic System
17 84127229 4 HYDRAULIC HOSE 9.53mm ID x 338mm L, SAE 100R16
Hydraulic System
18 84263584 2 SPACER
19 430357 12 CLAMP
20 431941 6 SUPPORT
21 434097 1 SUPPORT
22 9850685 2 BOLT Hex, M6 - 1 x 90mm, Cl 8.8
24 43874 2 BOLT Hex, M16 x 110, 8.8

HEADER 3020-35-FLEXIBLE GRAIN HEADER
35.410.05 p2 6/2021

35.410.05 p2 6/2021

26 87317453 4 ELBOW 90 Degree, 11/16" - 16, ORFS, Blkhd
27 84431546 4 UNION 11/16"-16 ORFS
28 84989392 4 ELBOW 90 Degree, 11/16"-16 ORFS x 11/16"-16 Fem Sw
29 87564749 3 ELBOW 90 Degree, 11/16"-16, ORFS
31 87010704 4 BHD LOCK NUT 11/16"-16
32 43118 6 BOLT Hex, M6 x 1.0 x 40mm, Cl 8.8
34 353308 8 NUT Hex, M6 x 1
35 120103 2 BOLT M8 x 1.25 x 16mm, Cl 8.8
37 43362 2 NUT M8 x 1.25, Cl 10
38 47449953 1 HYD TUBE

35.410.06 p1 6/2021
MANIFOLD, HYDRAULIC SYSTEM

35.410.06 p1 6/2021
MANIFOLD, HYDRAULIC SYSTEM
1 84411555 1 HYDRAULIC MANIFOLD

3 86579687 2 ELBOW 90 Degree, 11/16"-16 x M16 x 1.5 ORB 10mm
ORFSXM16 ORB
4 87736063 2 COIL Incl 9
5 84415615 2 SOLENOID VALVE
6 87736062 1 SENSOR Pressure
7 84415610 1 SERVICE KIT Inline Filter
8 87736064 2 SERVICE KIT
9 84419450 2 SEAL KIT
10 86598100 4 O-RING 2.2mm Thk x 13.3mm ID, Cl 6, 90 Duro
11 9993141 4 O-RING 0.07" Thk x 0.364" ID, -12, Cl 6, 90 Duro

SECTION INDEX
ELECTRICAL SYSTEMS
55.100.01 HARNESS, FLEX HEADER, MOUNTING
55.100.02 HARNESS, FLEX HEADER
55.100.03 HARNESS, ADAPTER KIT
55.404.01 LIGHT ASSEMBLY, WARNING

55.100.01 p1 6/2021
HARNESS, FLEX HEADER, MOUNTING

55.100.01 p1 6/2021
HARNESS, FLEX HEADER, MOUNTING
1 84305206 1 WIRE HARNESS Flex Header

2 86606228 1 COVER
3 445394 2 RIVET Pop, 3/16" x 1/2" OAL
4 84037188 1 O-RING 3mm Thk x 34.2mm ID, 70 Duro
5 86590413 2 BASE 15.87mm W x 22.22mm OAL x 9.9mm Thk Wire Tie
6 120098 4 BOLT Hex, M5 x 20, 8.8, Full Thd
8 86508813 4 NUT M5, Cl 8
10 86837775 1 RESISTOR

GRAIN HEADER
55.100.02 p1 6/2021
HARNESS, FLEX HEADER

55.100.02 p1 6/2021
HARNESS, FLEX HEADER
1 84305206 1 WIRE HARNESS Flex Header, Inc. 2-9

2 87692855 2 ELEC CONNECTOR Male, 2 Cavities 2-Pin, Right Hand And
Left Hand Flashing Light
3 84078681 2 WIRE CONNECTOR Female 2-Pin, Reel Vertical Position, Reel
Horizontal Position
4 87644909 4 WIRE CONNECTOR Female, 3 Pins 3-Pin, Left Center Height,
Left Hand Height/Tilt, Right Hand Height/Tilt, Right Center
Height
5 87039236 1 ELEC CONNECTOR 6-Pin, Header Type
6 86837775 1 RESISTOR Module
7 87703820 1 ELEC CONNECTOR 31-Pin, Feeder
8 87711966 2 ELEC CONNECTOR 2-Pin, Flex Solenoid #1 And #2
9 87695580 1 ELEC CONNECTOR Female, 3 Pole 3-Pin, Flex Pressure Read

GRAIN HEADER
55.100.03 p1 6/2021
HARNESS, ADAPTER KIT

55.100.03 p1 6/2021
HARNESS, ADAPTER KIT
1 84473623 1 WIRE HARNESS Adapter Kit

2 87692858 1 ELEC CONNECTOR Male 3-Pin, Warning Lights
3 87706509 1 SOCKET/RECEPTACLE 3-Pin, Auto Header Height
4 87644909 3 WIRE CONNECTOR Female, 3 Pins 3-Pin, Auto Header Height,
Right And Left Hand Field Tracker Sensor
5 87692855 2 ELEC CONNECTOR Male, 2 Cavities 2-Pin, Right And Left
Warning
6 NSS 1 NOT SOLD SEPARAT CONNECTOR, 5-Pin, Field Tracker
7 87706918 1 ELEC CONNECTOR Dust Cap

GRAIN HEADER
55.404.01 p1 6/2021
LIGHT ASSEMBLY, WARNING

55.404.01 p1 6/2021
LIGHT ASSEMBLY, WARNING
1 134454A1 2 LAMP Halogen, 12V, 32W, Amber Warning, Inc. 2-4

2 F63434 1 LENS Warning Lamp
3 A43731 1 GASKET Warning Lamp
4 9417866 1 BULB C6, #1156, 12.8V Warning Lamp
5 86521552 4 BOLT Hex, 5/16" - 18 x 3/4", Gr 5
7 86521605 4 FLANGE NUT 5/16" - 18, Gr 5
8 87382 8 LOCK NUT 5/16"-18, GB
9 127031A1 2 SUPPORT Warning Lamp
10 390636A1 2 BRACKET Warning Lamp
11 145345 4 U-BOLT
12 87423314 2 GROMMET 1.5" ID x 2.125" ID x 0.562" Thk Oil Cooler

GRAIN HEADER
SECTION INDEX
ATTACHMENTS/HEADERS
58.100.01 01 MAIN DRIVE
58.100.01 02 MAIN DRIVE
58.100.02 REEL DRIVE
58.100.03 BELT DRIVE, WOBBLE BOX, LH, SINGLE AND DOUBLE DRIVE
58.100.04 BELT DRIVE, WOBBLE BOX, RH, DOUBLE DRIVE ONLY
58.101.01 REEL ARMS
58.101.02 01 REEL ADAPTER
58.101.02 02 REEL, ADAPTER, DD
58.101.03 KIT, REEL TINE FLAP
58.101.04 01 PICKUP REEL, STEEL TINES
58.101.04 01.1 PICK-UP, REEL, TINE STEEL
58.101.04 02 PICKUP REEL, PLASTIC TINES
58.101.05 PLASTIC TINES, PICKUP REEL, 6 BAT
58.101.05 01 KIT, REEL PACKAGE
58.101.05 02 KIT BEARING REEL ARM
58.101.06 STEEL TINES, PICKUP REEL, 6 BAT
58.101.07 HUB, REEL, MOUNTING PARTS
58.105.01 CONTROL ASSEMBLY, HEADER HEIGHT
58.105.01 01 CONTROL ASSEMBLY, HEADER HEIGHT
58.105.01 02 CONTROL ASSEMBLY, HEADER HEIGHT, DOUBLE DRIVE
58.110.01 STRIPPER
58.110.02 01 THIRD STRIPPER KIT
58.110.02 02 THIRD STRIPPER KIT, DD
58.110.03 01 KNIFE ASSEMBLY, 3 INCH
58.110.03 01 KNIFE ASSEMBLY, SPARES, 3 INCH

SECTION INDEX
ATTACHMENTS/HEADERS
58.110.03 02 KNIFE ASSEMBLY SEGMENTED
58.110.03 02 KNIFE ASSEMBLY, SPARES, FINE, DD
58.110.03 03 KNIFE ASSEMBLY, SPARES, COARSE, DD
58.110.03 04 KNIFE ASSY, SPARES, DD, RH
58.110.03 05 KNIFE ASSY, SPARES, DD, LH
58.110.03 06 KNIFE ASSY, SEGMENT, LH, COARSE
58.110.03 07 KNIFE ASSY, SEGMENT, RH, COARSE
58.110.04 01 CUTTERBAR, 3 INCH STANDARD GUARD, SINGLE DRIVE
58.110.04 02 CUTTERBAR, 3-INCH, STANDARD GUARD, DD
58.110.04 02 CUTTERBAR, 3-INCH, STANDARD GUARD, DOUBLE DRIVE
58.110.04 03 CUTTERBAR, SHORT GUARD, SINGLE DRIVE
58.110.04 03 STANDARD GUARD ASSY, SINGLE DRIVE
58.110.04 04 CUTTERBAR, STUB GUARD, DOUBLE DRIVE
58.110.04 04 STANDARD GUARD ASSY, DOUBLE DRIVE
58.110.04 05 CUTTERBAR, SHORT GUARD, DOUBLE DRIVE
58.110.04 06 KIT CUTTERBAR ANGLE REDUCTION 30FT, 35FT
58.110.05 01 WOBBLE BOX ASSEMBLY, RH, DOUBLE DRIVE ONLY
58.110.05 02 WOBBLE BOX ASSEMBLY, LH, SINGLE AND DOUBLE DRIVE
58.110.05 03 WOBBLE BOX
58.110.05 06 SHAFT, PTO 21 TOOTH
58.110.06 08 KIT CENTER SECTION OVERLAP
58.110.06 09 KIT POLY SKID SHOE COMPLETE 30 FT DOUBLE DRIVE
58.110.06 10 KIT POLY SKID SHOE COMPLETE 35 FT SINGLE DRIVE
58.110.06 11 KIT, SKID/SHOE POLY 30FT BEFORE MY 2020
58.120.01 AUGER ASSEMBLY
58.120.01 01 KIT AUGER FINGER DELUXE
58.120.01 02 KIT AUGER FINGER PAIR STANDARD
58.120.01 03 KIT 150 TINES WITH SCREWS
58.120.02 DIA KIT, AUGER, LOW RPM
58.130.02 01 ARM, FLOOR SUPPORT, RH
58.130.02 02 ARMS, FLOOR SUPPORT, LH

SECTION INDEX
ATTACHMENTS/HEADERS
58.130.03 01 FLOOR ASSEMBLY, SINGLE DRIVE
58.130.03 2 FLOOR, ASSY, DOUBLE DRIVE
58.130.04 01 FLOOR, ASSY, RH
58.130.04 02 FLOOR, ASSY, OUTER RH
58.130.04 03 FLOOR, ASSY, CENTER
58.130.04 04 FLOOR, ASSY, LH
58.130.04 05 FLOOR, ASSY, LH END
58.130.04 06 TOOL BOX, ASSY
58.131.01 01 DIVIDER ASSEMBLY, LEFT HAND
58.131.01 02 DIVIDER ASSEMBLY, LONG, LEFT HAND
58.131.02 01 DIVIDER ASSEMBLY, RIGHT HAND
58.131.02 02 DIVIDER ASSEMBLY, LONG, RIGHT HAND
58.131.02 03 DIVIDER, ASSY, RIGHT HAND, DOUBLE DRIVE
58.131.03 DIVIDER ASSEMBLY, EXTENDED
58.131.04 AHHC SENSOR/FEELER NARROW, ASSEMBLY
58.131.05 AHHC SENSOR/FEELER WIDE, ASSEMBLY
58.131.05 01 KIT ARM PLASTIC HHC ARMS
58.145.01 SENSORS, REEL POSITION
58.208.01 01 END SHIELDING, RIGHT HAND
58.208.01 02 END SHIELDING, RIGHT HAND, DD
58.208.02 END SHIELDING, LEFT HAND
58.208.03 WEAR PLATES
58.208.04 01 SHOE, SKID ASSY, SD/DD NARROW
58.208.04 02 SHOE, SKID ASSY, DD RH
58.500.01 MAIN SHAFT, SINGLE DRIVE
58.500.01 02 MAIN SHAFT - DD
58.500.02 SHAFT, POWER TAKE-OFF
58.500.02 01 SHAFT, PTO, ASN YGH231300
58.500.03 PTO, 6 TEETH

SECTION INDEX
ATTACHMENTS/HEADERS
58.500.04 KIT, STD GUARD SINGLE DR 30FT
58.500.08 KIT STD GUARD DOUBLE DR 35FT
58.500.09 KIT STD GUARD SINGLE DRIVE 35FT
58.500.10 STD GUARD DOUBLE DR 30FT
58.500.11 KIT STANDARD GUARD SINGLE DRIVE 25FT.
58.500.12 PTO SHAFT HALF 1 3/8

58.100.01 01 p1 6/2021
MAIN DRIVE
58.100.01 01 p1 6/2021
MAIN DRIVE
1 84175196 1 ARM ASSY. Main Drive

2 84156112 1 EYEBOLT BOLT, EYE Main Drive
3 86979948 2 FLANGE Main Drive
4 87485736 1 SPECIAL WASHER
5 84125180 1 BALL BEARING 45mm ID x 85mm OD x 22mm W Main Drive
6 84176718 1 SPROCKET ASSY. 43T, RC80 43T, RC80
7 87524771 4 SHIM 16.3mm ID x 32mm OD x 2mm Thk
8 84547319 1 SPROCKET RC80, 15T
9 84221149 1 ROD ASSY. Main Drive
10 120049 1 CARRIAGE BOLT Short Nk, M16 x 90mm, Cl 8.8
11 84422689 1 CHAIN #80, 76 Links x 25.4mm = 1930.4mm #80, 75 Link, 1
Connecting Link 288063, Main Drive
12 9706685 9 NUT Hex, 12mm D, Cl 8
13 100038 3 LOCK NUT M12 x 1.75, Cl 8
14 87036813 2 PLOW BOLT M12 x 35mm, Cl 10.9
16 87751682 1 BUSHING 16.5mm ID x 40mm OD x 26mm L
19 87033290 1 CARRIAGE BOLT Sht Sq Nk, M12 x 55mm, Cl 8.8
20 84213929 1 WEAR STRIP Main Drive
21 84216772 1 ANGLE Main Drive
23 364818 1 ADJUSTMENT SCREW Hex, M12 x 285mm, Cl 8.8 M12x285
24 87485286 1 BLOCK M12 Hexagon
25 84251628 1 SHAFT Main Drive

GRAIN HEADER
58.100.01 01 p2 6/2021
MAIN DRIVE
58.100.01 01 p2 6/2021
MAIN DRIVE
26 43168 6 BOLT Hex, M16 x 40mm, Cl 8.8

27 86508583 1 BOLT Hex, M16 x 35mm, Cl 8.8, Full Thd
28 84308394 1 WASHER
29 14442131 3 SCREW Flat Csk Hd, M8 x 1.25 x 25mm, Cl 10.9 M8x25
31 412250 3 LOCK NUT M8 x 1.25, Cl 8
32 86000441 4 LOCK NUT M16 x 2.0, Cl 8
34 86512430 4 CARRIAGE BOLT Reg Sq Nk, M16 x 2 x 50mm, Cl 8.8
38 87016581 1 FLANGE NUT M16 x 2, CI 10

GRAIN HEADER
58.100.01 02 p1 6/2021
MAIN DRIVE
58.100.01 02 p1 6/2021
MAIN DRIVE
1 334534 1 BANJO BOLT Main Drive

2 84388527 1 ARM Main Drive
3 87485736 1 SPECIAL WASHER
4 84261957 1 HUB Main Drive
5 9706685 3 NUT Hex, 12mm D, Cl 8
6 100038 2 LOCK NUT M12 x 1.75, Cl 8
7 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
11 364818 1 ADJUSTMENT SCREW Hex, M12 x 285mm, Cl 8.8
12 87485286 1 BLOCK M12 Hexagon
13 86000441 4 LOCK NUT M16 x 2.0, Cl 8
14 9706693 1 BOLT M12 x 60mm, Cl 8.8

GRAIN HEADER
58.100.02 p1 6/2021
REEL DRIVE
58.100.02 p1 6/2021
REEL DRIVE
1 87045366 1 ANGLE Reel Drive Motor

2 130409A1 1 MOTOR, HYDRAULIC Reel Drive
87036557R 1 REMAN-HYD MOTOR 195 CC 3020-20, 3020-25, 3020-30,
3020-35 All (1/11-); Reman for new PN 130409A1
87036557C CORE-MOTOR HYDRAULIC 195 CC Return Number
3 188118A1 1 SEAL KIT Reel Drive Motor
4 129973A2 1 SPROCKET Reel Driven, 51T
5 87450165 1 DRIVE SPROCKET Reel, 17T
6 87036559 2 CLEVIS PIN 7/16" x 2.781"
7 280251 2 COTTER PIN 3/32" OD x 1" OAL
8 87659777 2 FLEXIBLE HOSE 12.70 mm ID x 2400.00 mm, SAE 100R17 Or
SAE 100R16 Reel Drive
9 9621483 2 HYD CONNECTOR 1"-14 ORFS x 7/8"-14 ORB
11 87053561 1 CHAIN 70 Links x 15.88mm = 1111.25mm Reel Drive, #50,
43.75"
12 353308 3 NUT Hex, M6 x 1
15 120116 1 BOLT Hex, M10 x 1.5 x 80mm, Cl 8.8, Full Thd Bolt, M10 X 80
Full, GR8.8, ZND
16 100016 3 NUT M10 x 1.5, Cl 8
18 87304415 2 SET SCREW 3/8" - 24 x 3/8"

GRAIN HEADER
58.100.02 p2 6/2021
REEL DRIVE
58.100.02 p2 6/2021
REEL DRIVE

20 100038 2 LOCK NUT M12 x 1.75, Cl 8
21 43127 5 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
23 9706690 5 NUT M8 x 1.25, Cl 8
24 430356 6 CLAMP
25 84814948 3 SUPPORT Reel Drive
26 258978A1 1 SHIELD Reel Drive, Inc. 27-31
27 258980A1 1 SUPPORT Reel Drive Shield
28 439-1428 2 HEADED PIN 1/4" OD x 1-3/4" OAL, Gr 2 Reel Drive Shield
29 432-612 2 COTTER PIN 3/32" x 3/4" Reel Drive Shield
30 84346731 1 SHIELD Reel Drive
31 291944A1 1 LATCH Reel Drive Shield

GRAIN HEADER
58.100.03 p1 6/2021
BELT DRIVE, WOBBLE BOX, LH, SINGLE AND DOUBLE DRIVE

58.100.03 p1 6/2021
1 87725967 1 DRIVEN PULLEY

2 43168 1 BOLT Hex, M16 x 40mm, Cl 8.8
5 84177827 1 SLEEVE 16mm ID x 62mm L
6 575098R1 1 SPACER 16.7mm ID x 22.23mm OD x 15.9mm L
7 86588003 2 IDLER 51.6mm W x 228.6mm OD Wheel
8 120093 2 BOLT M16 x 80, Cl 8.8
10 100020 4 NUT M16 x 2.0, Cl 8
11 87041732 1 V-BELT 22.33 mm W x 2981.96 mm L
12 87698568 1 TUBE
12A 395589 3 BUSHING 25h8mm ID x 28H7mm OD x 30mm L
13 334967 1 BOLT Hex, M16 x 2 x 140mm, Cl 8.8
14 84123122 1 ARM ASSY. Idler, Left Hand
15 43874 1 BOLT Hex, M16 x 110, 8.8
17 86996213 1 IDLER 185.74mm OD Stationary Idler
18 368317 1 KEY 10mm x 8mm x 25mm 10 x 8 x 25
20 12164521 1 NUT Hex, M24, 2mm Pitch,19mm High, Cl 10
21 9513105 1 CUP WASHER
22 337475 1 NUT M12, Cl 10 Lower
22 323238 1 THIN NUT Hex, M12, 1.75mm Pitch, Cl 05 Upper
23 447305 1 TIE-ROD TIE
24 9513808 1 BOLT Hex, M10 x 1.5 x 35mm, Cl 8.8
25 100037 1 LOCK NUT M10 x 1.5, Cl 8
26 87663624 1 GUIDE Poly

GRAIN HEADER
58.100.03 p2 6/2021

58.100.03 p2 6/2021
27 84181668 1 ARM Indicator

28 920397 1 SPRING
29 412126 1 LOCK NUT M12 x 1.75
30 87756741 1 PULLEY 247.7mm OD
31 170056 1 KEY 12mm W x 50mm OAL
34 84477282 1 SHIELD
36 84343215 1 SHIELD

GRAIN HEADER
58.100.04 p1 6/2021
BELT DRIVE, WOBBLE BOX, RH, DOUBLE DRIVE ONLY

58.100.04 p1 6/2021
1 87756741 1 PULLEY 247.7mm OD Sheave

2 87725967 1 DRIVEN PULLEY
4 12164521 1 NUT Hex, M24, 2mm Pitch,19mm High, Cl 10
5 575098R1 1 SPACER 16.7mm ID x 22.23mm OD x 15.9mm L
6 86588003 2 IDLER 51.6mm W x 228.6mm OD Wheel
8 120093 2 BOLT M16 x 80, Cl 8.8 M16 x 80, 8.8
10 100020 4 NUT M16 x 2.0, Cl 8 M16, CI 8
11 87041732 1 V-BELT 22.33 mm W x 2981.96 mm L
13 87698568 1 TUBE Hub
14 334967 1 BOLT Hex, M16 x 2 x 140mm, Cl 8.8
15 84135559 1 ARM Idler, RH
16 43874 1 BOLT Hex, M16 x 110, 8.8
18 86996213 1 IDLER 185.74mm OD Belt, Stationary Idler
20 447305 1 TIE-ROD
21 9513808 1 BOLT Hex, M10 x 1.5 x 35mm, Cl 8.8
22 100037 1 LOCK NUT M10 x 1.5, Cl 8 M10 x 1.5, CI 8
23 87663624 1 GUIDE
24 84181668 1 ARM
25 84177827 1 SLEEVE 16mm ID x 62mm L
26 920397 1 SPRING
27 9513105 1 CUP WASHER
28 412126 1 LOCK NUT M12 x 1.75

GRAIN HEADER
58.100.04 p2 6/2021

58.100.04 p2 6/2021
29 170056 1 KEY 12mm W x 50mm OAL

31 43168 1 BOLT Hex, M16 x 40mm, Cl 8.8 Hex, M16 x 2 40, 8.8, Full Thd
32 368317 1 KEY 10mm x 8mm x 25mm 10 x 8 x 25
33 84485266 1 SHIELD
34 84378925 1 ANGLE BAR
36 337475 1 NUT M12, Cl 10 M12, CI 10
M12
38 323238 1 THIN NUT Hex, M12, 1.75mm Pitch, Cl 05

GRAIN HEADER
58.101.01 p1 6/2021
REEL ARMS
58.101.01 p1 6/2021
REEL ARMS
1 84348475 1 ARM Reel, Left Hand

2 84348476 1 ARM Reel, Right Hand
3 87645701 2 HINGE Reel Arm
4 84234631 1 SUPPORT Reel Arm, Left Hand
5 9833239 6 THREADED INSERT M6
6 84242532 1 SPRING CLIP Reel Arm, Right Hand
7 84242566 1 SPRING CLIP Reel Arm, Left Hand
8 84072277 2 HOOK
9 84242351 1 SUPPORT Reel Arm, Right Hand
12 9706685 4 NUT Hex, 12mm D, Cl 8
13 120100 2 BOLT M6 x 20mm, Cl 8.8

GRAIN HEADER
58.101.02 01 p1 6/2021
REEL ADAPTER
58.101.02 01 p1 6/2021
REEL ADAPTER
1 {51592969} 1 Reel Adapter, Right Hand

2 {51592968} 1 Reel Adapter, Left Hand
3 48157251 2 STRIP Reel Adapter

GRAIN HEADER
58.101.02 02 p1 6/2021
REEL, ADAPTER, DD
58.101.02 02 p1 6/2021
REEL, ADAPTER, DD
1 84389260 1 BRACKET, SUPPORTING

2 84232893 1 BRACKET, SUPPORTING
3 87647472 2 SLIDE

HEADER
58.101.03 p1 6/2021
KIT, REEL TINE FLAP

58.101.03 p1 6/2021
KIT, REEL TINE FLAP
1 86705199 3 PACKAGE Reel Tine Flap, Inc. 2-5, 25 And 30 Foot Header
1 86705199 4 PACKAGE Reel Tine Flap, Inc. 2-5, 35 Foot Header
2 86514396 27 BACKING PLATE
3 86634225 9 FLAP
4 87010605 27 U-BOLT
5 523282 54 SERRATED NUT Flg, USR, 1/4" - 20

GRAIN HEADER
58.101.04 01 p1 6/2021
PICKUP REEL, STEEL TINES

58.101.04 01 p1 6/2021
1 86518431 1 COLLAR
2 167934 10 WASHER 1.62" ID x 2.25" OD x 0.139"
3 167940 4 BUSHING 39.76mm ID x 44.53mm OD x 38.1mm L
4 100037 96 LOCK NUT M10 x 1.5, Cl 8 20 Foot Header
5 86609389 1 FRAME
6 86512428 2 CARRIAGE BOLT Sq Nk, M12 x 40mm, Cl 8.8, Full Thd
7 9706685 2 NUT Hex, 12mm D, Cl 8
9 80710 2 LUBE NIPPLE 1/8” – 27 Dryseal PTF
10 120104 12 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
11 100038 12 LOCK NUT M12 x 1.75, Cl 8
12 9706690 12 NUT M8 x 1.25, Cl 8
13 167953 2 RING
14 86518386 6 BALL BEARING 10 mm ID x 38.97 mm OD x 44.15 mm
15 86518392 12 ROLLER BEARING 30.963 mm ID x 52.4 mm OD x 14.5 mm
16 86518393 12 PLUG 22 mm ID x 30 mm OD
17 86609726 2 SHIELD
18 87523837 42 ARM 35 Foot Header
19 87045530 1 HOUSING RH

GRAIN HEADER
58.101.04 01 p2 6/2021

58.101.04 01 p2 6/2021
20 43140 60 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8 20 Foot Header

20 43140 84 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8 30 & 35 Foot Header
21 120069 30 BOLT M10 x 1.5 x 56.58mm OAL, Cl 8.8
21 120069 36 BOLT M10 x 1.5 x 56.58mm OAL, Cl 8.8
21 120069 42 BOLT M10 x 1.5 x 56.58mm OAL, Cl 8.8
21 120069 48 BOLT M10 x 1.5 x 56.58mm OAL, Cl 8.8
22 87047050 4 SHIELD
23 84469382 60 NYLON BEARING
24 9842301 30 STRAP
24 9842301 36 STRAP
24 9842301 42 STRAP
24 9842301 48 STRAP
25 86609773 9 PLATE
25 86609773 12 PLATE
25 87053169 12 PLATE
26 86518387 12 SCREW Socket Head Shoulder, M12 x 1.75 x 50mm, Cl 9.8
27 87037954 1 SHAFT Driving, 20, 25 and 30 Foot Header
27 84212117 1 SHAFT Driving, 35 Foot Header
28 86609553 1 SHAFT Driven, 20, 25 and 30 Foot Header
28 84212118 1 SHAFT Driven, 35 Foot Header

GRAIN HEADER
58.101.04 01 p3 6/2021

58.101.04 01 p3 6/2021

GRAIN HEADER
58.101.04 01.1 p1 6/2021
PICK-UP, REEL, TINE STEEL

58.101.04 01.1 p1 6/2021
PICK-UP, REEL, TINE STEEL
1 84468473 1 SHAFT Center

2 84297508 3 TINE BAR 3 Hole 318.31 mm
2 84297509 3 TINE BAR 3 Hole 242.11 mm
3 87017196 21 TINE Steel Single
4 87017195 1058 TINE Steel, Double
5 87029978 126 KIT Steel Tine
7 9671714 12 FLANGE BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8

58.101.04 02 p1 6/2021
PICKUP REEL, PLASTIC TINES

58.101.04 02 p1 6/2021
1 86518431 2 COLLAR
2 167934 4 WASHER 1.62" ID x 2.25" OD x 0.139"
4 100037 96 LOCK NUT M10 x 1.5, Cl 8
5 86609389 1 FRAME
7 84473235 1 HUB
10 120104 6 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
11 100038 6 LOCK NUT M12 x 1.75, Cl 8
12 9706690 6 NUT M8 x 1.25, Cl 8
13 167953 1 RING
16 86518393 6 PLUG 22 mm ID x 30 mm OD
17 86609726 1 SHIELD
18 87523837 30 ARM 14.5" LONG
18 9842291 30 ARM 16" LONG
19 86626144 6 SHIELD
20 43140 60 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
21 120069 30 BOLT M10 x 1.5 x 56.58mm OAL, Cl 8.8
22 87047050 2 SHIELD
23 9842300 60 BEARING ASSY =H1204&I1204
24 9842301 30 STRAP
25 87053169 18 PLATE
27 427411A1 1 SHAFT Driving, RH 20 Foot Header

58.101.04 02 p2 6/2021

58.101.04 02 p2 6/2021
27 84212117 1 SHAFT Driving, RH 35 Foot Header

27 87037954 1 SHAFT Driving, RH 25 and 30 Foot Header
28 86609553 1 SHAFT Driven, LH 20, 25 and 30 Foot Header
28 84212118 1 SHAFT Driven, LH 35 Foot Header
29 9706685 3 NUT Hex, 12mm D, Cl 8
33 84473233 2 BRONZE BUSHING
34 87414 1 LUBE NIPPLE 1/4" - 28 NPT

58.101.05 p1 6/2021
PLASTIC TINES, PICKUP REEL, 6 BAT

58.101.05 p1 6/2021
1 84297398 1 SUPPORT TUBE Center Shaft, 20 Foot Header

1 87529353 1 SHAFT ASSY. Center, 35 Foot Header
2 84297507 6 TINE BAR Bat, Plastic, 20 Foot Header
2 84297503 6 TINE BAR Bat, Plastic, 25 Foot Header
2 84297497 6 TUBE Bat, Plastic, 30 Foot Header
2 87529352 6 TUBE 35 mm OD x 10473.82 mm L Bat, Plastic, 35 Foot Header
3 86608282 24 FINGER Plastic, No Bat
4 86608284 15 FINGER Plastic, Right Hand Bat, 20 And 25 Foot Header
4 86608284 18 FINGER Plastic, Right Hand Bat, 30 Foot Header
4 86608284 21 FINGER Plastic, Right Hand Bat, 35 Foot Header
5 86608283 12 FINGER Plastic, Left Hand Bat, 20 Foot Header
6 86608281 198 FINGER Plastic, Full Bat, 20 Foot Header Pack Qty of 10

GRAIN HEADER
58.101.05 p2 6/2021

58.101.05 p2 6/2021
6 86608281 360 FINGER Plastic, Full Bat, 35 Foot Header {ack Qty Of 10
7 9842264 246 SELF-TAP SCREW Hex, M3.5 x 1.3 x 16mm 3.5 x 16, 20 Foot
Header
Header
Header
Header
8 {84297334} 1 20FT Assy, Incl 1 - 7
8 84297333 1 REEL 25FT Assy, Incl 1 - 7
8 84297332 1 REEL 30FT Assy, Incl 1 - 7
8 87051496 1 REEL 35FT Assy, Incl 1 - 7

GRAIN HEADER
58.101.05 01 p1 6/2021
KIT, REEL PACKAGE

58.101.05 01 p1 6/2021
KIT, REEL PACKAGE
1 87046716 1 DIA KIT, HARVESTER 30FT Reel, Incl 2 - 31

2 86518431 2 COLLAR
3 167934 4 WASHER 1.62" ID x 2.25" OD x 0.139"
5 100037 126 LOCK NUT M10 x 1.5, Cl 8
6 86609389 1 FRAME
8 9706685 2 NUT Hex, 12mm D, Cl 8
11 120104 12 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
13 9706690 12 NUT M8 x 1.25, Cl 8
14 167953 2 RING
17 86518393 12 PLUG 22 mm ID x 30 mm OD
18 86609726 2 SHIELD End
19 9842291 42 ARM Reel
20 87045530 1 HOUSING
21 43140 84 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
22 120069 42 BOLT M10 x 1.5 x 56.58mm OAL, Cl 8.8
24 84469382 84 NYLON BEARING Reel Arm
25 9842301 42 STRAP Bearing
26 86609773 12 PLATE Anchor

58.101.05 01 p2 6/2021
KIT, REEL PACKAGE

58.101.05 01 p2 6/2021
KIT, REEL PACKAGE

Shoulder
28 87037954 1 SHAFT Driving
29 86609553 1 SHAFT Driven
30 87047050 4 SHIELD
31 100038 12 LOCK NUT M12 x 1.75, Cl 8

58.101.05 02 p1 6/2021
KIT BEARING REEL ARM

58.101.05 02 p1 6/2021
KIT BEARING REEL ARM
1 B95624 1 KIT Incl 2 - 5

3 9842301 1 STRAP
4 120113 1 BOLT Hex, M10 x 1.5 x 50mm, Cl 8.8, Full Thd
5 87030549 1 LOCK NUT M10 x 1.5, Cl 10

GRAIN HEADER
58.101.06 p1 6/2021
STEEL TINES, PICKUP REEL, 6 BAT

58.101.06 p1 6/2021
STEEL TINES, PICKUP REEL, 6 BAT
1 84297394 1 SUPPORT TUBE Central

2 84297499 3 TUBE 3rd hole = 318.31 mm
2 84297498 3 TUBE 3rd hole = 242.11 mm
3 87017196 33 TINE Steel, Single
4 87017195 159 TINE Steel, Double
5 87029978 192 KIT Steel Tine
7 9671714 192 FLANGE BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8

58.101.07 p1 6/2021
HUB, REEL, MOUNTING PARTS

58.101.07 p1 6/2021
HUB, REEL, MOUNTING PARTS
1 84473235 1 HUB
2 84473233 2 BRONZE BUSHING Oil
3 87414 1 LUBE NIPPLE 1/4" - 28 NPT

58.105.01 p1 6/2021
CONTROL ASSEMBLY, HEADER HEIGHT

58.105.01 p1 6/2021
1 84310399 1 ROD Left Hand, 20 Foot Header

2 84310378 1 ROD Right Hand, 20 Foot Header
3 84296810 1 BRACKET, SUPPORTING Left Hand
4 84296813 1 BRACKET, SUPPORTING Right Hand
5 84230426 5 MOUNTING PLATE 20 Foot Header
6 86616339 4 SENSOR CCW Automatic Header Height Control
7 84126929 4 ARM
8 84296770 2 THREADED ROD Adjustment
9 86548493 8 BALL 5/16" -24 x 1-2/5" End
10 84228553 2 ADJUSTMENT ROD
11 87047744 2 SPRING
12 100-3431 4 SNAP RING #31, Ext, E-Type
14 445394 2 RIVET Pop, 3/16" x 1/2" OAL
15 86544168 8 BOLT Hex, M5 x 35mm, Cl 8.8
16 9824326 16 WASHER Flat, 5.3mm ID x 10mm OD x 1mm Thk,
17 43440 8 LOCK NUT M5 x .8, Cl 8
18 86508568 14 BOLT Hex, M6 x 1 x 16mm, Cl 8.8 20 Foot Header
20 Foot Header

58.105.01 p2 6/2021

58.105.01 p2 6/2021

25 Foot Header
30 Foot Header
20 86500688 14 NUT Hex, M6 x 1.0, Cl 10.9 20 Foot Header
21 43127 4 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
22 43130 2 BOLT Hex, M8 x 1.25 x 50mm, Cl 8.8
24 9706690 4 NUT M8 x 1.25, Cl 8
25 338949 5 CARRIAGE BOLT M10 x 1.5 x 25mm, Cl 8.8 20 Foot Header
Foot Header
Foot Header
Foot Header
27 86500689 5 NUT M10 x 1.5, Cl 10 20 Foot Header
28 86629539 16 NUT 5/16"-24, G5
29 86590413 2 BASE 15.87mm W x 22.22mm OAL x 9.9mm Thk

58.105.01 p3 6/2021

58.105.01 p3 6/2021
30 84336890 1 DECAL Header Height Control (Not Shown)

31 87542982 7 BEARING ASSY 15.89mm ID Rod, 20 Foot Header
32 44284 4 COLLAR 16mm ID x 28.57mm OD x 12.7mm L Rod
33 80975 4 SET SCREW Hex Soc, 5/16"-18 x 1/4" Rod

58.105.01 01 p1 6/2021

58.105.01 01 p1 6/2021
1 84228558 1 ROD Left Hand

2 84228560 1 ROD Right Hand
7 84126929 4 ARM
9 86548493 8 BALL 5/16" -24 x 1-2/5" End
11 87047744 2 SPRING
14 445394 2 RIVET Pop, 3/16" x 1/2" OAL
15 86544168 8 BOLT Hex, M5 x 35mm, Cl 8.8
17 43440 8 LOCK NUT M5 x .8, Cl 8
18 86508568 26 BOLT Hex, M6 x 1 x 16mm, Cl 8.8
20 86500688 26 NUT Hex, M6 x 1.0, Cl 10.9
21 43127 4 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
22 43130 2 BOLT Hex, M8 x 1.25 x 50mm, Cl 8.8
24 9706690 4 NUT M8 x 1.25, Cl 8
27 86500689 11 NUT M10 x 1.5, Cl 10
28 86629539 16 NUT 5/16"-24, G5

58.105.01 01 p2 6/2021

58.105.01 01 p2 6/2021

58.105.01 02 p1 6/2021
CONTROL ASSEMBLY, HEADER HEIGHT, DOUBLE DRIVE

58.105.01 02 p1 6/2021
1 84228558 1 ROD Left Hand

2 84466555 1 ROD Right Hand
7 84126929 4 ARM
9 86548493 8 BALL 5/16" -24 x 1-2/5" End
11 87047744 2 SPRING
14 445394 2 RIVET Pop, 3/16" x 1/2" OAL
15 86544168 8 BOLT Hex, M5 x 35mm, Cl 8.8
17 43440 8 LOCK NUT M5 x .8, Cl 8
18 86508568 24 BOLT Hex, M6 x 1 x 16mm, Cl 8.8
20 86500688 24 NUT Hex, M6 x 1.0, Cl 10.9
21 43127 4 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
22 43130 2 BOLT Hex, M8 x 1.25 x 50mm, Cl 8.8
24 9706690 4 NUT M8 x 1.25, Cl 8
27 86500689 10 NUT M10 x 1.5, Cl 10
28 86629539 16 NUT 5/16"-24, G5

58.105.01 02 p2 6/2021

58.105.01 02 p2 6/2021

30 84336890 1 DECAL

58.110.01 p1 6/2021
STRIPPER
58.110.01 p1 6/2021
STRIPPER
1 87555156 2 STRIPPER 20 Foot Header

2 84256945 1 BRACKET Left Hand
3 84256946 1 BRACKET Right Hand
4 84216518 2 STRIP Center
5 84304905 2 STRIP Inside
6 84359864 2 BAND Outside, 20 Foot Header
6 84304910 2 STRIP Outside, 30 Foot Header
6 84304908 2 STRIP Outside, 35 Foot Header
7 84215790 4 BRACKET Stripper
9 84322796 12 RIVET 13mm OD x 34.4mm L 20 Foot Header
10 87556072 32 NUT Flng, 11.8mm OD x 19.8mm L 20 Foot Header

GRAIN HEADER
58.110.01 p2 6/2021
STRIPPER
58.110.01 p2 6/2021
STRIPPER

11 87015284 20 WASHER 8.8mm ID x 21.5mm OD x 2.5mm Thk 20 Foot
Header
Header
Header
Header
20 Foot Header
25 Foot Header
30 Foot Header
35 Foot Header

GRAIN HEADER
58.110.01 p3 6/2021
STRIPPER
58.110.01 p3 6/2021
STRIPPER

17 87028323 10 HEX SOC SCREW Btn Head, M8 x 1.25 x 25mm, Cl 8.8

GRAIN HEADER
58.110.01 p1 6/2021
STRIPPER, ASSY
58.110.01 p1 6/2021
STRIPPER, ASSY
1 84299985 4 STRIPPER
2 84256945 1 BRACKET LH
3 84256946 1 BRACKET RH
6 84304910 2 STRIP Out
7 84215790 4 BRACKET
9 84322796 20 RIVET 13mm OD x 34.4mm L
10 87556072 44 NUT Flng, 11.8mm OD x 19.8mm L
12 43127 32 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
16 43362 32 NUT M8 x 1.25, Cl 10

58.110.01 p1 6/2021
STRIPPER, ASSY
58.110.01 p1 6/2021
STRIPPER, ASSY
1 87555156 4 STRIPPER
2 84256945 1 BRACKET LH
3 84256946 1 BRACKET RH
6 84304908 2 STRIP Out
7 84215790 4 BRACKET
9 84322796 24 RIVET 13mm OD x 34.4mm L
12 43127 38 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
16 43362 36 NUT M8 x 1.25, Cl 10

58.110.01 p1 6/2021
STRIPPER, ASSY
58.110.01 p1 6/2021
STRIPPER, ASSY
1 84256945 1 BRACKET LH
2 84256946 1 BRACKET RH
4 87555156 2 STRIPPER
5 84359864 2 BAND Inside
6 84215790 4 BRACKET
9 43127 20 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
13 43362 22 NUT M8 x 1.25, Cl 10
16 84322796 12 RIVET 13mm OD x 34.4mm L

58.110.01 p1 6/2021
STRIPPER, ASSY
58.110.01 p1 6/2021
STRIPPER, ASSY
1 84256945 1 BRACKET LH
2 84256946 1 BRACKET RH
4 84300880 4 STRIPPER
6 84215790 4 BRACKET
9 43127 20 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
13 43362 22 NUT M8 x 1.25, Cl 10
16 84322796 12 RIVET 13mm OD x 34.4mm L

58.110.02 01 p1 6/2021
THIRD STRIPPER KIT

58.110.02 01 p1 6/2021
THIRD STRIPPER KIT
1 84302550 1 KIT DIA, Third Stripper, Inc. 2, 3, 25 Foot Header

2 84323936 2 STRIPPER Third, 20 Foot Header

GRAIN HEADER
58.110.02 02 p1 6/2021
THIRD STRIPPER KIT, DD

58.110.02 02 p1 6/2021
THIRD STRIPPER KIT, DD
1 120038 1 CARRIAGE BOLT Rnd Head, M8 x 1.25 x 30mm, Cl 8.8, Full

Thd
2 1 84323936 2 STRIPPER 92.7" In Length
3 2 84323938 2 STRIPPER 60" In Length
3 3 84323937 2 STRIPPER 89.9" In Length
4 9804277 1 FLANGE NUT Hex, M8 x 1.25, Cl 8
(1) 30 And 35FT Head
(2) 30FT Head
(3) 35FT Head

HEADER
58.110.03 p1 6/2021
SEGMENTED KNIFE ASSY

58.110.03 p1 6/2021
1 84585669 1 KNIFE 25FT Fine, Segmented Assy, Incl 2 and 19

1 84585668 1 KNIFE 25FT Coarse, Segmented Assy, Incl 2 -and 19
2 84585638 1 KNIFE Fine, Segmented Head Assy, Incl 3 - 12
2 84585637 1 KNIFE Coarse, Segmented Head Assy, Incl 3 - 12
3 84585680 1 STRIP Knifeback
4 87728899 68 KNIFE SECTION Fine
4 87728905 68 KNIFE SECTION Coarse
5 321848A1 23 KNIFE CLIP
6 84429101 9 SCREW Pan HD, M6 x 28mm, Cl 10.9
7 84429102 128 LOCK NUT
10 1 84275285 1 CUTTERHEAD
10 2 48069254 1 CUTTERHEAD
11 1 84275917 1 CONNECTING BLOCK
11 2 47390299 1 BLOCK
12 300595 1 COTTER PIN M4 x 40
13 84585646 1 KNIFE Fine, Segmented Center Assy, Incl 4, 7, 14, 15
13 84585645 1 KNIFE Coarse, Segmented Center Assy, Incl 4, 7, 14, 15
14 NSS 1 NOT SOLD SEPARAT Knifeback
15 86563537 58 BOLT
16 84585653 1 KNIFE Fine, Segmented Tail Assy, Incl 4, 7, 9, 17, 18
16 84585652 1 KNIFE Coarse, Segmented Tail Assy, Incl 4, 7, 9, 17, 18
(1) Applies To 84585669 And 84585668
(2) Applies To 47601027 And 47601029

58.110.03 p2 6/2021

58.110.03 p2 6/2021
18 84543491 1 KNIFE SECTION Half

19 84585647 2 SERVICE KIT Metric Splice

58.110.03 p1 6/2021

58.110.03 p1 6/2021
1 84585667 1 KNIFE 30FT Fine, Segmented Assy, Incl 2 -10 12- 21

1 84585666 1 KNIFE 30FT Coarse, Segmented Assy, Incl 2 - 10 12- 21
2 84585638 1 KNIFE Fine, Segmented Head Assy, Incl 3 -10 - 12
2 84585637 1 KNIFE Coarse, Segmented Head Assy, Incl 3-10 - 12
3 84585680 1 STRIP
7 84429102 102 LOCK NUT
10 1 84275285 1 CUTTERHEAD
10 2 48069254 1 CUTTERHEAD
11 2 47390299 1 BLOCK
12 300595 1 COTTER PIN M4 x 40
13 84585644 1 KNIFE Fine, Segmented Center Assy, Incl 4, 5, 7, 9, 14
13 84585643 1 KNIFE Coarse, Segmented Center Assy, Incl 4, 5, 7, 9, 14
17 86563537 58 BOLT
(1) Applies To 84585666 And 84585667
(2) Applies To 47601025 And 47601026

58.110.03 p2 6/2021

58.110.03 p2 6/2021


58.110.03 p1 6/2021

58.110.03 p1 6/2021
1 84585665 1 KNIFE 35FT Fine, Segmented Assy, Incl 2-10 13 - 21

1 84585664 1 KNIFE 35FT Coarse, Segmented Assy, Incl 2 -10 13- 21
2 84585638 1 KNIFE Fine, Segmented Head Assy, Incl 3 - 12
2 84585637 1 KNIFE Coarse, Segmented Head Assy, Incl 3 - 12
3 84585680 1 STRIP
7 84429102 240 LOCK NUT
10 1 84275285 1 CUTTERHEAD Incl , 12
10 2 48069254 1 CUTTERHEAD Incl , 12
11 2 47390299 1 BLOCK
12 300595 1 COTTER PIN M4 x 40
13 84585644 1 KNIFE Fine, Segmented Center Assy, Incl 4, 5, 7, 9, 14
13 84585643 1 KNIFE Coarse, Segmented Center Assy, Incl 4, 5, 7, 9, 14
17 86563537 116 BOLT
(1) Applies To 84585665 And 84585664
(2) Applies To 47601023 And 47601024

58.110.03 p2 6/2021

58.110.03 p2 6/2021


58.110.03 p1 6/2021
M6 x 19.44mm bolt - 47895196 - M6 nut - 84429102

58.110.03 p1 6/2021
1 84585671 1 KNIFE 20FT Fine, Segmented Assy, Incl 2 - 18

1 84585670 1 KNIFE 20FT Coarse, Segmented Assy, Incl 2 - 18
2 84585640 1 KNIFE LH Fine, Segmented Head Assy, Incl 3 - 11
2 84585639 1 KNIFE LH Coarse, Segmented Head Assy, Incl 3 - 11
3 84585680 1 STRIP Knifeback
6 84429102 146 LOCK NUT
9 84585655 1 KNIFE Tail Assy, Fine, Segmented, Incl 4, 6, 8, 10, 11
9 84585654 1 KNIFE Tail Assy, Coarse, Segmented, Incl 4, 6, 8, 10, 11
12 84585646 1 KNIFE Center Fine, Segmented Assy, Incl 4, 6, 13, 14
12 84585645 1 KNIFE Center Coarse, Segmented Assy, Incl 4, 6, 13, 14
14 86563537 58 BOLT
16 1 84275285 1 CUTTERHEAD Incl 19
16 2 48069254 1 CUTTERHEAD Incl 19
17 2 47390299 1 BLOCK
(1) Applies To 84585671 And 84585670
(2) Applies To 47601030 And 47601031

58.110.03 p2 6/2021
M6 x 19.44mm bolt - 47895196 - M6 nut - 84429102

58.110.03 p2 6/2021
18 300595 1 COTTER PIN M4 x 40

19 87604453 1 CROWN NUT

58.110.03 01 p1 6/2021
KNIFE ASSEMBLY, 3 INCH

58.110.03 01 p1 6/2021
1 84585637 1 KNIFE Segmented, Head Assembly, 20, 25, 30, 35 Foot

Header, Coarse, Incl 1 - 8, 10
1 84585638 1 KNIFE Segmented, Head Assembly, 20, 25, 30, 35 Footer
Header, Fine, Incl 1 - 8, 10
1 84585639 1 KNIFE Segmented, LH Head Assembly, 20, 25, 30, 35 Foot
Header, Coarse, Incl 1 - 8, 10
1 84585640 1 KNIFE Segmented, LH Head Assembly, 20, 25, 30, 35 Foot
Header, Fine, Incl 1 - 8, 10
1 84585641 1 KNIFE Segmented, RH Head Assembly, 30, 35 Foot Header,
Coarse, Incl 1 - 8, 10
1 84585642 1 KNIFE Segmented, RH Head Assembly, 30, 35 Foot Header,
Fine, Incl 1 - 8, 10
1 84213793 1 KNIFE ASSY 25 Foot Header, Inc. 2-10
2 84467282 3 KNIFE SECTION Section, OS CSB BH
2 84467292 2 KNIFE SECTION Section, OS CST BH
2 87470188 1 KNIFE SECTION Section, Tomahawk
2 87728905 100 KNIFE SECTION Section, 25 Foot Header, Coarse

GRAIN HEADER
58.110.03 01 p2 6/2021

58.110.03 01 p2 6/2021
2 87728899 100 KNIFE SECTION Section, 25 Foot Header, Fine

3 84147595 1 KNIFE HOLDER 25 Foot Header
3 84585680 1 STRIP Knife Back, LH
3 84585681 1 STRIP Knife Back, RH
4 84429101 9 SCREW Pan HD, M6 x 28mm, Cl 10.9 M6 x 28
5 84429102 202 LOCK NUT Lock, M6,25 Foot Header
5 84429102 242 LOCK NUT Lock, M6, 30 Foot Header
5 84429102 282 LOCK NUT Lock, M6, 35 Foot Header
6 87663841 189 SCREW Pan HD, M6 x 18mm, Cl 10.9 M6 x 18, 25 Foot Header
7 84429100 4 SCREW Pan HD, M6 x 22mm, Cl 10.9 M6 x 22
7 87470018 7 SCREW FLAT, M6 x 14.5mm, Cl 10.9 Overlap Knife Section,
Tomahawk
8 87544154 48 KNIFE CLIP
10 1 84275285 1 CUTTERHEAD Cutterhead Assembly
10 2 48069254 1 CUTTERHEAD
87604453 1 CROWN NUT Top of Head assy
10733901 1 COTTER PIN M4 x 45 Top of Head assy
(1) Applies To 84585638, 84585639, 84585640, 84585641, 84585642
(2) Applies To 47601016, 47601017, 47601020, 47601021, 47601022

GRAIN HEADER
58.110.03 01 p3 6/2021

58.110.03 01 p3 6/2021
11 1 84275917 1 CONNECTING BLOCK Connecting Block

11 2 47390299 1 BLOCK Connecting
(1) Applies To 84585638, 84585639, 84585640, 84585641, 84585642
(2) Applies To 47601016, 47601017, 47601020, 47601021, 47601022

GRAIN HEADER
58.110.03 01 p1 6/2021
KNIFE ASSEMBLY, SPARES, 3 INCH

58.110.03 01 p1 6/2021
KNIFE ASSEMBLY, SPARES, 3 INCH
1 84274636 1 KNIFE ASSY Coarse, 20 Foot Header

1 84392914 1 KNIFE ASSY Fine, 20 Foot Header
2 84271337 1 DEFLECTOR
3 87728905 5 KNIFE SECTION Section
3 87470187 1 KNIFE SECTION Auger Heads
3 47431717 1 KNIFE SECTION Draper Heads
3 87470188 1 KNIFE SECTION Tomahawk
3 87470186 1 KNIFE SECTION Bottom
5 86505259 2 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
7 337475 2 NUT M12, Cl 10
8 120101 2 BOLT Hex, M6 x 1 x 30mm, Cl 8.8
10 9706755 2 NUT Hex, M6 x 1 pitch, Cl 8
13 43362 2 NUT M8 x 1.25, Cl 10

GRAIN HEADER
58.110.03 02 p1 6/2021
KNIFE ASSEMBLY SEGMENTED

58.110.03 02 p1 6/2021
1 84585664 1 KNIFE Knife Assembly, Segmented, 35 Foot, Coarse

1 84585665 1 KNIFE Knife Assembly, Segmented, 35 Foot, Fine
2 84585679 1 KNIFE Knife Assembly, Segmented, 35 Foot, Left Hand, Coarse
2 84585673 1 KNIFE Knife Assembly, Segmented, 35 Foot, Left Hand, Fine
2 84585677 1 KNIFE Knife Assembly, Segmented, 30 Foot, Left Hand, Coarse
2 84585675 1 KNIFE Knife Assembly, Segmented, 30 Foot, Left Hand, Fine
3 84585678 1 KNIFE Knife Assembly, Segmented, 35 Foot, Right Hand,
Coarse
3 84585672 1 KNIFE Knife Assembly, Segmented, 35 Foot, Right Hand, Fine
3 84585676 1 KNIFE Knife Assembly, Segmented, 30 Foot, Right Hand,
Coarse
3 84585674 1 KNIFE Knife Assembly, Segmented, 30 Foot, Right Hand, Fine
4 84585647 2 SERVICE KIT Splice, 20 Foot

GRAIN HEADER
58.110.03 02 p2 6/2021

58.110.03 02 p2 6/2021

5 47895201 AR KNIFE Segmented Splice Hardware Kit, Incl 6 - 7
6 47895196 1 SCREW
7 84429102 1 LOCK NUT

GRAIN HEADER
58.110.03 02 p1 6/2021
KNIFE ASSEMBLY, SPARES, FINE, DD

58.110.03 02 p1 6/2021
KNIFE ASSEMBLY, SPARES, FINE, DD
1 84493625 1 KNIFE ASSY 30 Foot DD Header, LH

1 84486510 1 KNIFE ASSY 35 Foot DD Header, LH
2 84493630 1 KNIFE ASSY 30 Foot DD Header, RH
2 84486512 1 KNIFE ASSY 35 Foot DD Header, RH
3 87728899 5 KNIFE SECTION 30 & 35 Foot DD Header
4 87470188 1 KNIFE SECTION Tomahawk, 30 & 35 Foot DD Header
7 120101 4 BOLT Hex, M6 x 1 x 30mm, Cl 8.8
10 87563152 4 WASHER 17mm ID x 26.5mm OD x 4mm Thk
11 86505259 4 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
11 120092 4 BOLT M16 x 70mm, Cl 8.8
13 337475 4 NUT M12, Cl 10
13 392530 4 NUT M16, Cl 10

HEADER
58.110.03 03 p1 6/2021
KNIFE ASSEMBLY, SPARES, COARSE, DD

58.110.03 03 p1 6/2021
KNIFE ASSEMBLY, SPARES, COARSE, DD
1 84170820 1 KNIFE LH, 30'

1 87489671 1 KNIFE LH, 35'
2 84170823 1 KNIFE RH, 30'
2 87493457 1 KNIFE RH, 35'
3 87728905 5 KNIFE SECTION
7 120101 4 BOLT Hex, M6 x 1 x 30mm, Cl 8.8
11 86505259 4 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
11 120092 4 BOLT M16 x 70mm, Cl 8.8
13 337475 4 NUT M12, Cl 10
13 392530 4 NUT M16, Cl 10
14 47895196 AR SCREW Not Shown Bolt
15 84429102 AR LOCK NUT Not Shown Nut

HEADER
58.110.03 04 p1 6/2021
KNIFE ASSY, SPARES, DD, RH

58.110.03 04 p1 6/2021
KNIFE ASSY, SPARES, DD, RH
1 NSS 1 NOT SOLD SEPARAT For Knife Heads See 58.110

1 84170823 1 KNIFE bh
1 87493457 1 KNIFE Assy, 35ft RH
2 87728905 57 KNIFE SECTION Section, 30ft
3 84172857 1 KNIFE Back, Knife, 30ft
3 87489695 1 KNIFE Back, Knife, 35ft
6 87663841 96 SCREW Pan HD, M6 x 18mm, Cl 10.9 30ft
7 84429102 120 LOCK NUT 30ft
7 84429102 140 LOCK NUT 35ft
8 87488453 1 LATH
9 87470186 3 KNIFE SECTION CSB
10 87470018 6 SCREW FLAT, M6 x 14.5mm, Cl 10.9 Overlap Knife Section

HEADER
58.110.03 05 p1 6/2021
KNIFE ASSY, SPARES, DD, LH

58.110.03 05 p1 6/2021
KNIFE ASSY, SPARES, DD, LH
1 NSS 1 NOT SOLD SEPARAT For Knife Head See 58.110.03

1 84170820 1 KNIFE Assy, 30ft, LH
1 87489671 1 KNIFE Assy, 35ft, LH
3 84172856 1 KNIFE Back, Knife, LH 4669mm in length
3 87489680 1 BAR Back, Knife, LH 5431mm in length
5 84429102 123 LOCK NUT 30ft
5 84429102 143 LOCK NUT 35ft

HEADER
58.110.03 06 p1 6/2021
KNIFE ASSY, SEGMENT, LH, COARSE

58.110.03 06 p1 6/2021
KNIFE ASSY, SEGMENT, LH, COARSE
1 48185480 1 KNIFE ASSY, Incl 2 - 5

2 48185460 1 KNIFE SEGMENTED, LH HEAD ASSEMBLY, COARSE
3 84585645 1 KNIFE SEGMENTED, CTR ASSEMBLY, COARSE
4 84585663 1 KNIFE SEGMENTED, TAIL ASSEMBLY, COARSE
5 84585647 2 SERVICE KIT SPLICE

58.110.03 07 p1 6/2021
KNIFE ASSY, SEGMENT, RH, COARSE

58.110.03 07 p1 6/2021
KNIFE ASSY, SEGMENT, RH, COARSE
1 48185479 1 KNIFE Incl 2 - 4

2 48185462 1 KNIFE SEGMENTED, RH HEAD ASSEMBLY
3 84585662 1 KNIFE SEGMENTED, RH TAIL ASSEMBLY

58.110.04 01 p1 6/2021
CUTTERBAR, 3 INCH STANDARD GUARD, SINGLE DRIVE

58.110.04 01 p1 6/2021
1 NSS 1 NOT SOLD SEPARAT WOBBLE BOX ASSEMBLY

2 84245171 1 GUARD Right Hand, Knife 3 Inch
3 251206A2 36 SHOE Skid, Cutterbar, 20 Foot Header
4 1 87702974 4 GUARD Knife 3 Inch,Standard, Single Drive
4 2 87702974 7 GUARD Knife 3 Inch, Standard, Double Drive
4 84409304 3 GUARD Guard, Stub
4 84409315 1 GUARD Guard, Stub, LH, SD And DD
4 84409307 36 GUARD Guard, Stub, 20 Foot Header
4 84409307 46 GUARD Guard, Stub, 25 Foot Header
4 84409307 52 GUARD Guard, Stub, 30 Foot Header, SD And DD
4 84409307 66 GUARD Guard, Stub, 35 Foot Header, SD And DD
5 84422134 4 KNIFE CLIP High Knife Clip
5 84409311 3 KNIFE CLIP Clip, Knife, Special HCRC
5 84409313 1 KNIFE CLIP Clip, Knife, LH, HCRC
6 84337069 1 SKID/SHOE Right Hand, Single Drive
6 84485626 1 SKID/SHOE Right Hand, Double Drive
6 84337990 1 SKID/SHOE Wear Plate, Plastic, Right Hand, Single Drive; See
Figure 58.208.03
(1) 20ft, 25ft, 30ft, 35ft
(2) 30ft, 35ft

GRAIN HEADER
58.110.04 01 p2 6/2021

58.110.04 01 p2 6/2021
7 87702973 36 GUARD Knife 3 Inch, 20 Foot Header

7 87470814 2 KNIFE COVER Overlap, Center Guard Of Header, Double Drive
8 482769 18 SHIM 25mm OD x 0.59mm Thk Adjusting, 20 Foot Header
8 84395857 20 SHIM 33mm OD x 2.1mm Thk Zinc Plated, 20 Foot Header
9 86630786 18 KNIFE CLIP Heat Treated 20 Foot Header
9 84396057 36 KNIFE CLIP Clip, Knife, HCRC, 20 Foot Header

GRAIN HEADER
58.110.04 01 p3 6/2021

58.110.04 01 p3 6/2021

10 86630787 18 KNIFE CLIP 20 Foot Header
10 84396059 36 STEEL PLATE Plate, Adjusting, HCRC 20 Foot
11 84337496 1 SKID/SHOE Skid, Left Hand
11 84490689 1 SKID/SHOE Left Hand, Dark Gray
14 9706690 1 NUT M8 x 1.25, Cl 8
15 43127 2 BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8
16 84818450 3 CARRIAGE BOLT M12 x 85mm, Cl 8.8
17 86505259 2 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
17 120092 2 BOLT M16 x 70mm, Cl 8.8
20 9706685 5 NUT Hex, 12mm D, Cl 8
21 9833222 40 CARRIAGE BOLT Sq Nk, M10 x 1.5 x 35mm, Cl 8.8, Full Thd
8.8P M10 x 35, 20 Foot Header

GRAIN HEADER
58.110.04 01 p4 6/2021

58.110.04 01 p4 6/2021
24 87742342 40 PLOW BOLT M10 x 1.5 x 30mm, Class 10.9 20 Foot Header
25 86619802 40 FLANGE NUT M10 x 1.5, Cl 8 20 Foot Header

GRAIN HEADER
58.110.04 01 p5 6/2021

58.110.04 01 p5 6/2021

26 86625255 7 WASHER 13.3mm ID x 24.5mm OD x 3mm Thk SN Only
Applies to Knife Head Connecting Block
26 86639326 2 WASHER 17.3mm ID x 34.5mm OD x 5mm Thk SN Only
Applies to Knife Head Connecting Block
28 87493466 1 SHIELD Wide Skid Shoe, Cutter Bar, Dark Gray, 30 Foot
Header
29 1 84225871 1 KNIFE COVER Gaurd, Knife 3 Point
30 84396061 40 SHIM 31mm OD x 3.25mm Thk Knife Gaurd, HCRC 20 Foot
31 84422992 4 ADJUSTING PLATE Plate, Adjusting Hi HCRC
(1) Standard, Double Drive

GRAIN HEADER
58.110.04 02 p1 6/2021
CUTTERBAR, 3-INCH, STANDARD GUARD, DD

58.110.04 02 p1 6/2021
1 87702974 7 GUARD Guard

2 84422134 4 KNIFE CLIP
3 87702973 51 GUARD 30 Foot, Guard HT
4 86630786 13 KNIFE CLIP Heat Treated RH, 30 Foot
5 86630787 26 KNIFE CLIP 30 Foot
6 84369441 31 SHIM 30 Foot, Zinc Plated
6 84396061 31 SHIM 31mm OD x 3.25mm Thk 30 Foot, Painted
7 87470814 1 KNIFE COVER Overlap Guard
9 86505259 4 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
9 120092 4 BOLT M16 x 70mm, Cl 8.8
11 84184577 13 KNIFE CLIP LH, 30 Foot
12 9706685 10 NUT Hex, 12mm D, Cl 8
13 9833222 61 CARRIAGE BOLT Sq Nk, M10 x 1.5 x 35mm, Cl 8.8, Full Thd 30
Foot
Foot
Foot
Foot

HEADER
58.110.04 02 p2 6/2021

58.110.04 02 p2 6/2021
16 87742342 30 PLOW BOLT M10 x 1.5 x 30mm, Class 10.9 30 Foot

17 86619802 30 FLANGE NUT M10 x 1.5, Cl 8 30 Foot
19 84225871 1 KNIFE COVER 3 Point Guard

HEADER
58.110.04 02 p1 6/2021
CUTTERBAR, 3-INCH, STANDARD GUARD, DOUBLE DRIVE

58.110.04 02 p1 6/2021

2 84422134 4 KNIFE CLIP
7 87470814 1 KNIFE COVER Overlap Guard
9 86505259 4 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
9 120092 4 BOLT M16 x 70mm, Cl 8.8
12 9706685 10 NUT Hex, 12mm D, Cl 8
Foot
Foot
Foot
Foot

HEADER
58.110.04 02 p2 6/2021

58.110.04 02 p2 6/2021


HEADER
58.110.04 03 p1 6/2021
CUTTERBAR, SHORT GUARD, SINGLE DRIVE

58.110.04 03 p1 6/2021
1 84409315 1 GUARD Stub, LH

2 1 84409304 3 GUARD Stub, LH End
3 84409307 56 GUARD Stub
4 84395857 86 SHIM 33mm OD x 2.1mm Thk Knife Guard
5 84409311 3 KNIFE CLIP Special
6 84396057 56 KNIFE CLIP
8 84409313 1 KNIFE CLIP LH
9 84396059 56 STEEL PLATE Adjusting
11 84245171 1 GUARD Knife, RH
13 100037 122 LOCK NUT M10 x 1.5, Cl 8
17 87742342 60 PLOW BOLT M10 x 1.5 x 30mm, Class 10.9
18 86619802 60 FLANGE NUT M10 x 1.5, Cl 8
21 86505259 2 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9
21 120092 2 BOLT M16 x 70mm, Cl 8.8
(1) Guards Installed After Ref 1

HEADER
58.110.04 03 p2 6/2021

58.110.04 03 p2 6/2021
23 9706685 5 NUT Hex, 12mm D, Cl 8

26 84337069 1 SKID/SHOE RH
27 84337990 1 SKID/SHOE RH
28 87613322 6 POP RIVET Pop, 6.35mm OD x 15.75mm L

HEADER
58.110.04 03 p1 6/2021
STANDARD GUARD ASSY, SINGLE DRIVE

58.110.04 03 p1 6/2021
1 NSS 34 NOT SOLD SEPARAT Skid Shoe Assy, 20FT

2 87702974 4 GUARD
3 84422134 2 KNIFE CLIP
20FT
25FT
30FT
35FT
20FT
25FT
30FT
35FT
6 100037 82 LOCK NUT M10 x 1.5, Cl 8 20FT
6 100037 102 LOCK NUT M10 x 1.5, Cl 8 25FT
6 100037 122 LOCK NUT M10 x 1.5, Cl 8 30FT
6 100037 142 LOCK NUT M10 x 1.5, Cl 8 35FT
7 87702973 36 GUARD 20FT
7 87702973 46 GUARD 25FT
7 87702973 56 GUARD 30FT
7 87702973 66 GUARD 35FT

GRAIN HEADER
58.110.04 03 p2 6/2021

58.110.04 03 p2 6/2021
8 86630786 18 KNIFE CLIP Heat Treated 20FT

9 86630787 18 KNIFE CLIP 20FT
9 86630787 23 KNIFE CLIP 25FT
9 86630787 28 KNIFE CLIP 30FT
9 86630787 33 KNIFE CLIP 35FT
10 87742342 20 PLOW BOLT M10 x 1.5 x 30mm, Class 10.9 20FT
11 86619802 20 FLANGE NUT M10 x 1.5, Cl 8 20FT
12 84245171 1 GUARD

GRAIN HEADER
58.110.04 04 p1 6/2021
CUTTERBAR, STUB GUARD, DOUBLE DRIVE

58.110.04 04 p1 6/2021
1 84409315 1 GUARD Stub, LH End

2 84409304 6 GUARD Stub, LH
3 84409307 52 GUARD Stub, Center, 30FT
3 84409307 62 GUARD Stub, Center, 35FT
4 84395857 82 SHIM 33mm OD x 2.1mm Thk Knife Guard, 30FT
5 84409311 7 KNIFE CLIP Knife Special
6 84396057 52 KNIFE CLIP Knife, HCRC, 30FT
6 84396057 62 KNIFE CLIP Knife, HCRC, 35FT
7 84409309 8 ADJUSTING PLATE HCRC
9 84396059 52 STEEL PLATE Adjusting, 30FT
9 84396059 62 STEEL PLATE Adjusting, 35FT
11 84395855 1 GUARD Triple
16 86512425 120 CARRIAGE BOLT Sq Nk, M10 x 45mm, Cl 8.8 30FT
16 86512425 140 CARRIAGE BOLT Sq Nk, M10 x 45mm, Cl 8.8 35FT

HEADER
58.110.04 04 p2 6/2021

58.110.04 04 p2 6/2021
17 100037 121 LOCK NUT M10 x 1.5, Cl 8 30FT

17 100037 141 LOCK NUT M10 x 1.5, Cl 8 35FT
19 120092 4 BOLT M16 x 70mm, Cl 8.8
22 9706685 10 NUT Hex, 12mm D, Cl 8

HEADER
58.110.04 04 p1 6/2021
STANDARD GUARD ASSY, DOUBLE DRIVE

58.110.04 04 p1 6/2021
STANDARD GUARD ASSY, DOUBLE DRIVE
1 1 84396061 31 SHIM 31mm OD x 3.25mm Thk

2 87702974 7 GUARD 3 Used On Right Side, 4 Used On Left Side
3 84422134 4 KNIFE CLIP 2 Used On Either Side
4 84184577 13 KNIFE CLIP Used to Left of Center
5 87702973 51 GUARD 25 Used on Right Side, 26 Used on Left Side
6 84225871 1 KNIFE COVER RH End, Triple
7 86630786 13 KNIFE CLIP Heat Treated Used to Right of Center
8 87470814 1 KNIFE COVER Center Guard
(1) Used Between Guard and Skid Shoe On Center Guard and All Guards to Left of Center

HEADER
58.110.04 05 p1 6/2021
CUTTERBAR, SHORT GUARD, DOUBLE DRIVE

58.110.04 05 p1 6/2021
1 NSS 1 NOT SOLD SEPARAT Wobble Box, LH

2 NSS 1 NOT SOLD SEPARAT Wobble Box, RH
3 251206A2 51 SHOE
4 87493466 1 SHIELD RH
5 84286205 1 SHIELD
6 84284219 6 GUARD
7 84126939 52 SHIELD
8 84395857 30 SHIM 33mm OD x 2.1mm Thk
9 84287020 7 CLIP
10 84284704 52 KNIFE CLIP
11 84287022 8 PLATE
13 84284706 52 PLATE
14 84396061 61 SHIM 31mm OD x 3.25mm Thk
15 87489694 1 STIFFENER
16 84395855 1 GUARD Triple
17 87679530 1 SHOE LH
18 84361201 1 SHOE
20 86619802 60 FLANGE NUT M10 x 1.5, Cl 8
24 100037 125 LOCK NUT M10 x 1.5, Cl 8
26 86505259 4 BOLT Hex, M12 x 1.75 x 70mm, Cl 10.9 Use with Arm
#87493463

HEADER
58.110.04 05 p2 6/2021

58.110.04 05 p2 6/2021
26 120092 4 BOLT M16 x 70mm, Cl 8.8 Use with Arm #47618623


HEADER
58.110.04 06 p1 6/2021
KIT CUTTERBAR ANGLE REDUCTION 30FT, 35FT

58.110.04 06 p1 6/2021
KIT CUTTERBAR ANGLE REDUCTION 30FT, 35FT
1 47888259 1 KIT Cutterbat Angle Reduction 30-35FT, Incl 2 - 11

2 47888860 1 INSTRUCTION Cutterbar Angle
3 47754218 1 PLATE LH
4 47754732 1 PLATE RH
5 47755304 2 LINK
6 47754175 1 MOUNT LH
7 47754174 1 MOUNT RH
9 47384562 11 PLUG Button, Flush
10 47754520 1 ARM RH
11 47754535 10 ARM

HEADER
58.110.05 01 p1 6/2021
WOBBLE BOX ASSEMBLY, RH, DOUBLE DRIVE ONLY

58.110.05 01 p1 6/2021
WOBBLE BOX ASSEMBLY, RH, DOUBLE DRIVE ONLY
1 84489286 1 SUPPORT Wobble Box, RH

2 87724927 1 WOBBLE BOX
3 87719769 1 PIVOTING ARM Wobble Box, M12
3 47390301 1 ARM Pivoting Wobble Box, M16
4 84484156 1 MOUNT Wobble Box, RH
5 84129479 1 BRACKET Wobble Box
6 84479456 1 PLATE Top, RH
9 86521733 1 BOLT Hex Flg, M16 x 90mm, Cl 10.9
11 86000441 1 LOCK NUT M16 x 2.0, Cl 8
13 9706687 3 BOLT M12 x 1.75 x 30mm, Cl 8.8
14 9706685 4 NUT Hex, 12mm D, Cl 8
15 120080 5 BOLT Hex, M12 x 45, 8.8

HEADER
58.110.05 02 p1 6/2021
WOBBLE BOX ASSEMBLY, LH, SINGLE AND DOUBLE DRIVE

58.110.05 02 p1 6/2021
WOBBLE BOX ASSEMBLY, LH, SINGLE AND DOUBLE DRIVE
1 87728904 1 SUPPORT Wobble Box, Left Hand

1 1 84489286 1 SUPPORT Wobble Box, Right Hand
2 87724927 1 WOBBLE BOX
87724927R 1 REMAN-WOBBLE BOX WOBBLE BOX 3020-20,3020-30,3020-
25,3020-35 ALL (1/11-)
87724927C CORE-WOBBLE BOX WOBBLE BOX Return Number
3 87719769 1 PIVOTING ARM Wobble Box, M12
3 47390301 1 ARM Pivoting Wobble Box, M16
4 84484156 1 MOUNT Wobble Box, Righ Hand, Dark Gray
4 84484788 1 MOUNT Wobble Box, Left Hand. Dark Gray
5 84129479 1 BRACKET Wobble Box
6 84285503 1 PLATE Wobble Box, Top
6 84479456 1 PLATE Top, Double Drive, Right Hand
6 84490487 1 PLATE Top, Single And Double Drive, Left Hand
9 86521733 1 BOLT Hex Flg, M16 x 90mm, Cl 10.9
11 86000441 1 LOCK NUT M16 x 2.0, Cl 8
13 9706687 3 BOLT M12 x 1.75 x 30mm, Cl 8.8
14 9706685 4 NUT Hex, 12mm D, Cl 8
15 120080 5 BOLT Hex, M12 x 45, 8.8 M12 x 45
(1) For Right Hand, Also Order 47557237 To Make This Work

GRAIN HEADER
58.110.05 03 p1 6/2021
WOBBLE BOX
58.110.05 03 p1 6/2021
WOBBLE BOX
1 87724927 1 WOBBLE BOX

87724927R 1 REMAN-WOBBLE BOX WOBBLE BOX 3020-20,3020-30,3020-
25,3020-35 ALL (1/11-)
87724927C CORE-WOBBLE BOX WOBBLE BOX Return Number
2 84185948 8 BOLT Hex, M12 x 1.75 x 22mm, Cl 8.8
3 87490543 1 SEAL 38.6mm ID x 62mm OD x 7mm Thk
4 87487264 1 COVER PLATE
5 87487254 1 BEARING COVER
6 87490059 1 EXPANSION PLUG
7 87486956 1 HOUSING
8 87490544 1 SEAL 50mm ID x 62mm OD x 7mm Thk
9 84150661 2 HEX SOCKET PLUG
10 84150337 2 MAGNETIC PLUG
11 87630866 1 BUSHING 49.98mm ID x 55.1mm OD x 20mm L
12 87630859 1 GROOVED BUSHING 50mm ID x 60mm OD x 30mm L
14 300642 2 CIRCLIP M35 x 1.5mm W, Internal
15 84150339 1 TAPERED BEARING 40mm ID x 80mm OD x 19.75mm W
16 84150338 1 TAPERED BEARING 30mm ID x 62mm OD x 17.25mm W
17 87487235 1 FORK
18 84185837 1 NUT
19 87487259 1 BEARING COVER 53.5 mm ID x 100 mm OD x 27 mm
20 87630328 1 BEARING HOUSING 86 mm ID x 45 mm
21 84150340 2 TAPERED BEARING 60mm ID x 95mm OD x 23mm W
22 87487236 1 SHAFT
23 84185904 1 SHIM 60.3mm ID x 71.7mm OD x 0.5mm Thk

GRAIN HEADER
58.110.05 03 p2 6/2021
WOBBLE BOX
58.110.05 03 p2 6/2021
WOBBLE BOX
24 87487370 2 SHIM KIT

25 120104 8 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8

GRAIN HEADER
58.110.05 06 p1 6/2021
SHAFT, PTO 21 TOOTH

58.110.05 06 p1 6/2021
SHAFT, PTO 21 TOOTH
1 47881142 1 PTO SHAFT 21 TOOTH AT COMBINE END

2 84260527 1 BOOKLET
3 47889192 1 YOKE Outer
4 87586145 2 SPIDER Cross Kit
5 87476733 1 YOKE
6 87586150 1 ROLL PIN 8mm OD x 55mm L
7 87586149 1 TUBE Hub Sleeve
8 84175175 1 TUBE 1195 mm L
9 87520073 1 ROLL PIN
10 87476730 1 YOKE
11 84270321 1 PTO CLUTCH
12 47889254 1 SHIELD
13 87586691 1 SUPPORT
14 87586687 6 SCREW
15 47499367 1 INNER SHIELD
16 47999155 1 SHIELD Outer
17 47957517 1 CONE
18 87517774 1 SHIELD Front
19 87586692 2 CHAIN Restraining
20 87685057 1 LABEL Danger /Shield Label Outer
21 87586693 1 DECAL
22 84260531 1 DANGER DECAL Danger CE Outer Shield Tube
23 87476136 1 KIT Lock Back Collar
24 47939173 1 DECAL Lubrication
25 47362902 1 PIN
26 87012736 8 BOLT AND NUT
27 84270317 1 FLANGE
28 84270316 1 BUSHING

GRAIN HEADER
58.110.05 06 p2 6/2021
SHAFT, PTO 21 TOOTH

58.110.05 06 p2 6/2021
SHAFT, PTO 21 TOOTH
29 84270315 2 DISC
30 84270314 1 HUB
31 84270313 1 PLATE
32 84270312 1 BAND
33 84270311 1 BELLEVILLE SPRING
34 47889247 1 SHIELD Outer
36 47889583 1 SHIELD

GRAIN HEADER
58.110.06 08 p1 6/2021
KIT CENTER SECTION OVERLAP

58.110.06 08 p1 6/2021
KIT CENTER SECTION OVERLAP
1 47630061 1 KIT Incl 2 - 6

2 84429102 13 LOCK NUT
3 87470018 13 SCREW FLAT, M6 x 14.5mm, Cl 10.9

GRAIN HEADER
58.110.06 09 p1 6/2021
KIT POLY SKID SHOE COMPLETE 30 FT DOUBLE DRIVE

58.110.06 09 p1 6/2021
KIT POLY SKID SHOE COMPLETE 30 FT DOUBLE DRIVE
1 48033413 1 KIT Incl 2 - 7

3 47367901 1 SKID/SHOE RH
5 84337989 1 SKID/SHOE LH
6 377581A1 1 SKID/SHOE 1 1/2 SKID
7 377580A1 61 SKID/SHOE SINGLE SKID

58.110.06 10 p1 6/2021
KIT POLY SKID SHOE COMPLETE 35 FT SINGLE DRIVE

58.110.06 10 p1 6/2021
KIT POLY SKID SHOE COMPLETE 35 FT SINGLE DRIVE
1 48033414 1 KIT Incl 2 - 7

6 377581A1 1 SKID/SHOE 1 1/2 SKID
6 377580A1 71 SKID/SHOE SINGLE SKID

58.110.06 11 p1 6/2021
KIT, SKID/SHOE POLY 30FT BEFORE MY 2020

58.110.06 11 p1 6/2021
KIT, SKID/SHOE POLY 30FT BEFORE MY 2020
1 51669656 1 KIT Incl 2 - 7

2 51669620 71 SKID/SHOE Skid Shoe
3 377581A1 1 SKID/SHOE Poly Skid Triplr Skid Shoe
4 84337989 1 SKID/SHOE LH Skid Shoe
5 84337990 1 SKID/SHOE RH Skid Shoe
7 87613322 387 POP RIVET Pop, 6.35mm OD x 15.75mm L Pop Rivet
.250x.625in PLN

58.120.01 p1 6/2021
AUGER ASSEMBLY
58.120.01 p1 6/2021
AUGER ASSEMBLY
1 84318440 1 AUGER 20 Foot Header

2 84261948 1 SHAFT
3 86620720 6 CRANKED LINK
4 86620026 14 FLANGED BEARING
5 87323339 6 BALL BEARING 35mm ID x 72mm OD x 19mm W
6 84362468 37 JOINT 20 Foot Header
7 84194057 27 FINGER Assembly, Grain Header 20 Foot Header
9 87620690 27 GUIDE Auger Finger 20 Foot Header
10 48057166 1 SHAFT
11 48057474 1 SHAFT Left Hand
12 84814912 1 BALL BEARING 35 mm ID x 72 mm OD x 51.1 mm
13 87471091 6 COVER

GRAIN HEADER
58.120.01 p2 6/2021
AUGER ASSEMBLY
58.120.01 p2 6/2021
AUGER ASSEMBLY
14 87017844 8 COVER Protection, 20 Foot Header

15 84224159 1 AUGER FLIGHT Left Hand
16 84263900 1 AUGER FLIGHT Left Hand
17 84224162 1 AUGER FLIGHT Right Hand
18 84263896 1 AUGER FLIGHT Right Hand
19 84261950 2 SHAFT 20 Foot Header
24 84268307 6 NUT M6 x 0.75, 8 ZND
25 84262759 6 SET SCREW M6 x 0.75 x 16mm
26 120100 82 BOLT M6 x 20mm, Cl 8.8 20 Foot Header
27 374891 6 CARRIAGE BOLT Rnd Head, M6 x 1 x 25mm, Cl 8.8 20 Foot
Header
31 300388 14 BOLT Hex, M12 x 1.75 x 25mm, Cl 8.8
32 43158 12 BOLT Hex, M12 x 80mm, Cl 8.8

GRAIN HEADER
58.120.01 p3 6/2021
AUGER ASSEMBLY
58.120.01 p3 6/2021
AUGER ASSEMBLY
33 86014250 16 SPRING NUT M6 x 1.0 20 Foot Header

20 Foot Header
25 Foot Header
30 Foot Header
35 Foot Header
41 84315756 54 NUT 20 Foot Header
41 84315756 66 NUT 25 Foot Header
41 84315756 76 NUT 30 Foot Header
41 84315756 86 NUT 35 Foot Header
42 86014250 AR SPRING NUT M6 x 1.0
44 353308 12 NUT Hex, M6 x 1
45 100016 29 NUT M10 x 1.5, Cl 8
46 87533547 26 LOCK NUT Prev Torque, M12, 1.75mm Pitch, Cl 10
47 9706690 6 NUT M8 x 1.25, Cl 8

GRAIN HEADER
58.120.01 01 p1 6/2021
KIT AUGER FINGER DELUXE

58.120.01 01 p1 6/2021
KIT AUGER FINGER DELUXE
1 47435766 1 KIT Incl 2 - 8

2 84315756 2 NUT
4 120100 2 BOLT M6 x 20mm, Cl 8.8
5 740591 1 COTTER PIN M10 x 67
6 84194057 1 FINGER Assembly, Grain Header
7 87620690 1 GUIDE Auger Finger
8 84362468 1 JOINT

GRAIN HEADER
58.120.01 02 p1 6/2021
KIT AUGER FINGER PAIR STANDARD

58.120.01 02 p1 6/2021
KIT AUGER FINGER PAIR STANDARD
1 47435759 1 KIT Incl 2 - 7

2 84315756 4 NUT
4 120100 4 BOLT M6 x 20mm, Cl 8.8
5 740591 2 COTTER PIN M10 x 67

GRAIN HEADER
58.120.01 03 p1 6/2021
KIT 150 TINES WITH SCREWS

58.120.01 03 p1 6/2021
KIT 150 TINES WITH SCREWS
1 48056252 1 KIT Incl Ref 2 and 3

2 47966407 150 SCREW
3 47966404 150 FINGER

GRAIN HEADER
58.120.02 p1 6/2021
DIA KIT, AUGER, LOW RPM

58.120.02 p1 6/2021
DIA KIT, AUGER, LOW RPM
1 84209468 1 SPROCKET 47T

2 84268316 1 CHAIN RC 80, 7 Links x 25.4mm = 177.8mm Chain

GRAIN HEADER
58.130.01 01 p1 6/2021
FLOOR SUPPORT
58.130.01 01 p1 6/2021
FLOOR SUPPORT
1 84306322 1 FRAME Floor Support, 20 Foot Header

1 84479419 1 FRAME Floor Support, 30 Foot DD Header
1 84479406 1 FRAME Floor Support, 35 Foot DD Header
2 NSS 1 NOT SOLD SEPARAT ARM, Right Hand, Incl in Ref. 1
3 NSS 1 NOT SOLD SEPARAT ARM, Incl in Ref. 1
4 87736132 1 SHAFT
5 87689122 1 CUP COVER Only used in 20, 25, 30, 35 Foot Headers (Not in
DD models)
6 84375835 1 COVER LH, All Headers (SD and DD Models)
6 84413069 1 BRACKET RH Cover, Additional Cover For DD Headers (Not In
SD Models)
7 450869 1 WASHER 20, 25, 30, 35 Foot Headers
7 450869 2 WASHER 30, 35 Foot DD Header
8 84229060 2 LINK
8 84568002 2 LINK
9 84349077 1 PLATE
10 84271863 2 BUSHING
11 84126943 1 SPRING Left Hand Runner Support, 20, 25, 30, 35 Foot Header
11 84126943 2 SPRING Left Hand Runner Support, 30, 35 Foot DD Header
12 124366A1 1 SPECIAL NUT Plug Spring Upper, 20, 25, 30, 35 Foot Header
12 124366A1 2 SPECIAL NUT Plug Spring Upper, 30, 35 Foot DD Header

GRAIN HEADER
58.130.01 01 p2 6/2021
FLOOR SUPPORT
58.130.01 01 p2 6/2021
FLOOR SUPPORT
13 100038 1 LOCK NUT M12 x 1.75, Cl 8 20, 25, 30, 35 Foot Header
13 100038 2 LOCK NUT M12 x 1.75, Cl 8 M12 x 1.75, CI 8, 30, 35 Foot DD
Header
14 1313104C1 1 PLUG Support Spring Lower, 20, 25, 30, 35 Foot Header
14 1313104C1 2 PLUG Support Spring Lower, 30, 35 Foot DD Header
15 337563 2 BOLT M12 x 1.75 x 47.68mm, Cl 10.9 20, 25, 30, 35 Foot
Header
15 337563 4 BOLT M12 x 1.75 x 47.68mm, Cl 10.9 30, 35 Foot DD Header
18 120104 5 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
19 496-41066 1 WASHER 5/8" ID x 1-1/2" OD x 3/16" Thk 20, 25, 30, 35 Foot
Header
19 496-41066 2 WASHER 5/8" ID x 1-1/2" OD x 3/16" Thk 30, 35 Foot DD
Header
20 87682407 3 CLEVIS PIN 12mm OD x 194.2mm L M12 x 180
21 124365A1 1 BOLT Hex, 5/8" - 11 x 254mm, Gr 5 20, 25, 30, 35 Foot Header
21 124365A1 2 BOLT Hex, 5/8" - 11 x 254mm, Gr 5 30, 35 Foot DD Header
22 425-1010 1 NUT 5/8"-11, G5 20, 25, 30, 35 Foot Header
22 425-1010 2 NUT 5/8"-11, G5 30, 35 Foot DD Header
23 439-5832 1 HEADED PIN 12.7mm OD x 50.8mm L 20, 25, 30, 35 Foot
Header
23 439-5832 2 HEADED PIN 12.7mm OD x 50.8mm L 30, 35 Foot DD Header

GRAIN HEADER
58.130.01 01 p3 6/2021
FLOOR SUPPORT
58.130.01 01 p3 6/2021
FLOOR SUPPORT
24 394818 1 COTTER PIN M5 x 25 20, 25, 30, 35 Foot Header

24 394818 2 COTTER PIN M5 x 25 30, 35 Foot DD Header
27 140016 5 WASHER M8 x 16mm OD x 1.6mm Thk
28 86508947 3 LINCH PIN 18.8mm OD
30 337475 1 NUT M12, Cl 10
31 84349076 1 STEP BOLT
32 300624 1 SNAP RING M12, Ext
33 47958444 2 PIN

GRAIN HEADER
58.130.01 02 p1 6/2021
FLOOR SUPPORT
58.130.01 02 p1 6/2021
FLOOR SUPPORT
1 NSS 4 NOT SOLD SEPARAT ARM, 20 Foot Header

1 NSS 6 NOT SOLD SEPARAT ARM, 25 Foot Header
1 NSS 8 NOT SOLD SEPARAT ARM, 30 Foot Header, 30 Foot DD
Header
1 NSS 10 NOT SOLD SEPARAT ARM, 35 Foot Header, 35 Foot DD
Header
2 NSS 1 NOT SOLD SEPARAT ARM
3 84129472 1 HUB Floor Support, 20, 25, 30, 35 Foot Header
3 84129472 2 HUB Floor Support, 30, 35 Foot DD Header
4 87736132 10 SHAFT 30 Foot Header, 30 Foot DD Header
4 87736132 12 SHAFT 35 Foot Header, 35 Foot DD Header
5 87736146 1 TUBE 370mm
5a 47710020 1 BUSHING Hex
6 87736151 1 TUBE 520 mm long
7 84349077 5 PLATE 20 Foot Header
7 84349077 6 PLATE 25 Foot Header
7 84349077 8 PLATE 30 Foot Header, 30 Foot DD Header
7 84349077 10 PLATE 35 Foot Header, 35 Foot DD Header
8 84271863 14 BUSHING 20 Foot Header
8 84271863 16 BUSHING 25 Foot Header
8 84271863 20 BUSHING 30 Foot Header, 30 Foot DD Header
8 84271863 24 BUSHING 35 Foot Header, 35 Foot DD Header

GRAIN HEADER
58.130.01 02 p2 6/2021
FLOOR SUPPORT
58.130.01 02 p2 6/2021
FLOOR SUPPORT
9 87498658 2 BUSHING 21mm ID x 31.8mm OD x 32.5mm L 20, 25, 30, 35

Foot Header
9 87498658 4 BUSHING 21mm ID x 31.8mm OD x 32.5mm L 30, 35 Foot DD
Header
20 Foot Header
25 Foot Header
30 Foot Header, 30 Foot DD Header
35 Foot Header, 35 Foot DD Header
11 412687 8 COTTER PIN 6.3mm OD x 32mm OAL 30 Foot Header, 30 Foot
DD Header
11 412687 10 COTTER PIN 6.3mm OD x 32mm OAL 35 Foot Header, 35 Foot
DD Header
12 86625266 1 WASHER 17.5mm ID x 30mm OD x 4mm Thk 20, 25, 30, 35
Foot Header
12 86625266 2 WASHER 17.5mm ID x 30mm OD x 4mm Thk 30, 35 Foot DD
Header
13 9828248 1 BOLT Hex, M16 x 2 x 60mm, Cl 10.9, Full Thd 20, 25, 30, 35
Foot Header
13 9828248 2 BOLT Hex, M16 x 2 x 60mm, Cl 10.9, Full Thd 30, 35 Foot DD
Header
15 10903721 4 BOLT Hex, M6 x 55mm, Cl 8.8
16 394632 1 WASHER 21mm ID x 40mm OD x 4mm Thk 20, 25, 30, 35 Foot
Header

GRAIN HEADER
58.130.01 02 p3 6/2021
FLOOR SUPPORT
58.130.01 02 p3 6/2021
FLOOR SUPPORT
16 394632 2 WASHER 21mm ID x 40mm OD x 4mm Thk 30, 35 Foot DD

Header
17 322359 1 BELLEVILLE WASHER 14mm OD x 1.3mm Thk 20, 25, 30, 35
Foot Header
17 322359 2 BELLEVILLE WASHER 14mm OD x 1.3mm Thk 30, 35 Foot DD
Header
18 87682407 5 CLEVIS PIN 12mm OD x 194.2mm L 20 Foot Header
18 87682407 4 CLEVIS PIN 12mm OD x 194.2mm L 25 Foot Header
18 87682407 6 CLEVIS PIN 12mm OD x 194.2mm L 30 Foot Header, 30 Foot
DD Header
18 87682407 8 CLEVIS PIN 12mm OD x 194.2mm L 35 Foot Header, 35 Foot
DD Header
19 86639035 1 BOLT Hex, M20 x 110mm, Cl 10.9, Full Thd 20, 25, 30, 35 Foot
Header
19 86639035 2 BOLT Hex, M20 x 110mm, Cl 10.9, Full Thd 30, 35 Foot DD
Header
20 353308 4 NUT Hex, M6 x 1
21 9706694 1 NUT Hex, M20, Cl 8 20, 25, 30, 35 Foot Header
21 9706694 2 NUT Hex, M20, Cl 8 30, 35 Foot DD Header
22 86511324 6 WASHER 13mm ID x 24mm OD x 2.5mm Thk 20 Foot Header
22 86511324 7 WASHER 13mm ID x 24mm OD x 2.5mm Thk 25 Foot Header
22 86511324 9 WASHER 13mm ID x 24mm OD x 2.5mm Thk 30 Foot Header,
30 Foot DD Header
22 86511324 11 WASHER 13mm ID x 24mm OD x 2.5mm Thk 35 Foot Header,
35 Foot DD Header
23 896-11022 16 WASHER 24mm ID x 44mm OD x 4mm Thk 20 Foot Header
23 896-11022 19 WASHER 24mm ID x 44mm OD x 4mm Thk 25 Foot Header

GRAIN HEADER
58.130.01 02 p4 6/2021
FLOOR SUPPORT
58.130.01 02 p4 6/2021
FLOOR SUPPORT
23 896-11022 25 WASHER 24mm ID x 44mm OD x 4mm Thk 30 Foot Header, 30

Foot DD Header
23 896-11022 31 WASHER 24mm ID x 44mm OD x 4mm Thk 35 Foot Header, 35
Foot DD Header
24 86508947 5 LINCH PIN 18.8mm OD 20 Foot Header
24 86508947 4 LINCH PIN 18.8mm OD 25 Foot Header
24 86508947 6 LINCH PIN 18.8mm OD 30 Foot Header, 30 Foot DD Header
24 86508947 8 LINCH PIN 18.8mm OD 35 Foot Header, 35 Foot DD Header
25 86592713 8 WASHER 13mm ID x 30mm OD x 6mm Thk 30 Foot Header, 30
Foot DD Header
25 86592713 10 WASHER 13mm ID x 30mm OD x 6mm Thk 35 Foot Header, 35
Foot DD Header
26 337475 5 NUT M12, Cl 10 20 Foot Header
26 337475 6 NUT M12, Cl 10 25 Foot Header
26 337475 8 NUT M12, Cl 10 30 Foot Header, 30 Foot DD Header
26 337475 10 NUT M12, Cl 10 35 Foot Header, 35 Foot DD Header
27 84349076 5 STEP BOLT 20 Foot Header
27 84349076 6 STEP BOLT 25 Foot Header
27 84349076 8 STEP BOLT 30 Foot Header, 30 Foot DD Header
27 84349076 10 STEP BOLT 35 Foot Header, 35 Foot DD Header
28 300624 5 SNAP RING M12, Ext 20 Foot Header
28 300624 6 SNAP RING M12, Ext 25 Foot Header
28 300624 8 SNAP RING M12, Ext 30 Foot Header, 30 Foot DD Header

GRAIN HEADER
58.130.01 02 p5 6/2021
FLOOR SUPPORT
58.130.01 02 p5 6/2021
FLOOR SUPPORT
28 300624 10 SNAP RING M12, Ext 35 Foot Header, 35 Foot DD Header

29 84295066 1 SUPPORT Arm, LH
29 84315621 1 SUPPORT Arm, RH
30 43168 4 BOLT Hex, M16 x 40mm, Cl 8.8

GRAIN HEADER
58.130.02 01 p1 6/2021
ARM, FLOOR SUPPORT, RH

58.130.02 01 p1 6/2021
ARM, FLOOR SUPPORT, RH
1 84354956 1 ARM RH
1 1 47754520 1 ARM RH
3 84590649 1 SQ HOLE WASHER 17mm ID x 34mm OD x 4.25mm Thk
4 84173610 1 SKID/SHOE Assy
4a 87538599 1 BUSHING 16mm ID x 38.2mm OD x 73mm L
6 86000441 1 LOCK NUT M16 x 2.0, Cl 8
7 84235792 1 TENSION SPRING 19.2mm ID x 80.5mm OD x 101.22mm L
8 395277 3 BOLT Hex, M12 x 1.75 x 130mm, Cl 8.8
10 337475 3 NUT M12, Cl 10
12 84325291 1 ARM RH
13 84155110 1 BLOCK ASSY.
14 87552612 2 CARRIAGE BOLT Short Sq Nk, M16 x 2 x 60mm, Cl 8.8
17 100020 2 NUT M16 x 2.0, Cl 8
18 84127262 1 BUSHING 45mm ID x 68mm OD x 32mm W
19 11061376 1 SNAP RING M68, Int
20 87371170 1 SPHERICAL BEARING 25mm ID x 42mm OD x 20mm W
21 300645 1 SNAP RING M42, Int
(1) Does Not Incl Threaded Stud

GRAIN HEADER
58.130.02 02 p1 6/2021
ARMS, FLOOR SUPPORT, LH

58.130.02 02 p1 6/2021
ARMS, FLOOR SUPPORT, LH
1 47377058 1 ARM Floor Support

2A 84569270 4 CARRIAGE BOLT Reg Sq Nk, M16 x 2 x 110mm, Cl 10.9
3 84173610 2 SKID/SHOE Floor Support Arm
4 86000441 2 LOCK NUT M16 x 2.0, Cl 8
5 84235792 2 TENSION SPRING 19.2mm ID x 80.5mm OD x 101.22mm L
Floor Support Arm
6 395277 6 BOLT Hex, M12 x 1.75 x 130mm, Cl 8.8
8 337475 6 NUT M12, Cl 10
9 300645 1 SNAP RING M42, Int
10 84285083 1 ARM Floor Support
11 84285503 1 PLATE Floor Support Arm
12 84155110 1 BLOCK ASSY. Floor Support Arm
13 300662 3 CARRIAGE BOLT Sht Sq Nk, M12 x 1.75 x 80mm, Cl 8.8
16 9706685 5 NUT Hex, 12mm D, Cl 8
17 87552612 2 CARRIAGE BOLT Short Sq Nk, M16 x 2 x 60mm, Cl 8.8
20 100020 2 NUT M16 x 2.0, Cl 8
21 84127262 1 BUSHING 45mm ID x 68mm OD x 32mm W
22 11061376 1 SNAP RING M68, Int
23 87371170 1 SPHERICAL BEARING 25mm ID x 42mm OD x 20mm W

GRAIN HEADER
58.130.03 01 p1 6/2021
FLOOR ASSEMBLY, SINGLE DRIVE

58.130.03 01 p1 6/2021
1 84195556 1 CUTTERBAR CUTTERBAR, Left Hand, Includes Hardware, 20,

25, 30, And 35 Foot Header
2 84195559 1 SERVICE KIT CUTTERBAR, Center, Includes Hardware, 25, 30
And 35 Foot Header
3 84359494 1 SERVICE KIT CUTTERBAR, Center, Includes Hardware, 20
Foot Header
Foot Header
3 84292854 2 CUTTERBAR 1826.8mm L Kit, Center, Includes Hardware, 30
Foot Header
Foot Header
3 84353044 1 CUTTERBAR 3198.4mm L Kit, Center, 30, 35 Foot Header
4 84359495 1 SERVICE KIT CUTTERBAR, Right Hand, Includes Hardware,
20 Foot Header
4 84195560 1 SERVICE KIT CUTTERBAR, Right Hand, Includes Hardware,
25, 30, And 35 Foot Header
5 84330933 1 SHEET Floor Assembly, Left Hand
6 84324323 12 LEAF SPRING Floor Assembly, Left Hand
7 86507486 AR CARRIAGE BOLT M8 x 1.25 x 20mm, Cl 8.8
8 86624184 AR WASHER 9mm ID x 16mm OD x 1.6mm Thk
9 86629542 AR LOCK NUT M8 x 1.25, Cl 8.8
10 84332238 1 PLATE Left Hand
11 445394 10 RIVET Pop, 3/16" x 1/2" OAL
12 84330930 9 SHEET Floor Assembly, Left Hand, 20 Foot Header

GRAIN HEADER
58.130.03 01 p2 6/2021

58.130.03 01 p2 6/2021

13 84330928 1 SHEET Floor Assembly, Center
14 84324326 1 LEAF SPRING Floor Assembly, Center
15 84330932 8 SHEET Floor Assembly, Right Hand, 20 Foot Header
16 84324324 12 LEAF SPRING Floor Assembly, Right Hand
17 84330929 1 SHEET Floor Assembly, Right Hand End
18 84174195 1 SEAL Floor Assembly, Right Hand End
22 100016 7 NUT M10 x 1.5, Cl 8
5 84494553 1 SHEET Floor Assembly, Left Hand End
10 84494081 1 PLATE Floor Assembly, End Plate
17 84483537 1 SHEET Floor Assembly, Right Hand End

GRAIN HEADER
58.130.03 03 p1 6/2021
FLOOR, ASSY, CUTTERBAR ASSY, SINGLE DRIVE

58.130.03 03 p1 6/2021
1 84126951 1 BAR LH
1 84195556 1 CUTTERBAR LH, Includes Hardware
2 84126953 2 BAR Inside
2 84195558 2 SERVICE KIT Inside, Includes Hardware
3 84353032 1 CUTTERBAR 3198.4mm L Center
3 84353044 1 CUTTERBAR 3198.4mm L Center, Service Kit, Includes
Hardware
4 84195560 1 SERVICE KIT RH, Includes Hardware
6 43140 7 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
8 100016 7 NUT M10 x 1.5, Cl 8

58.130.03 03 p1 6/2021

58.130.03 03 p1 6/2021
1 84126951 1 BAR LH
2 84359494 1 SERVICE KIT Center, Includes Hardware
3 84359388 1 CUTTERBAR RH
5 43140 7 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
7 100016 7 NUT M10 x 1.5, Cl 8

58.130.03 03 p1 6/2021

58.130.03 03 p1 6/2021
1 84126951 1 BAR LH
2 84211046 2 CUTTERBAR Inside Piece
2 84294102 2 SERVICE KIT Inside Piece, Includes Hardware
3 84353044 1 CUTTERBAR 3198.4mm L Service Kit, Center, Includes
Hardware
6 43140 7 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
8 100016 7 NUT M10 x 1.5, Cl 8

58.130.03 03 p1 6/2021

58.130.03 03 p1 6/2021
1 84126951 1 BAR LH
2 NLS 2 NO LONGER SERVICED ORDER 84292854 KIT
2 84292854 2 CUTTERBAR 1826.8mm L Inside, Service Kit, Includes
Hardware
3 84353044 1 CUTTERBAR 3198.4mm L Center, Service Kit, Includes
Hardware
6 43140 7 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
8 100016 7 NUT M10 x 1.5, Cl 8

58.130.03 2 p1 6/2021
FLOOR, ASSY, DOUBLE DRIVE

58.130.03 2 p1 6/2021
FLOOR, ASSY, DOUBLE DRIVE
1 84126951 1 BAR Cutterbar, LH

1 84195556 1 CUTTERBAR Cutterbar, Left Hand, Incl Harware
2 84126953 2 BAR Cutterbar, IN
4 84353041 1 CUTTERBAR 1191.2mm L RH
5 NSS 1 NOT SOLD SEPARAT Floor Assy, LH End
6 NSS 16 NOT SOLD SEPARAT Floor Assy, LH
7 NSS 1 NOT SOLD SEPARAT Floor Assy, Center
8 NSS 1 NOT SOLD SEPARAT Floor Assy, RH Outer
9 NSS 16 NOT SOLD SEPARAT Floor Assy, RH
12 43140 14 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
13 100016 14 NUT M10 x 1.5, Cl 8

HEADER
58.130.04 01 p1 6/2021
FLOOR, ASSY, RH
58.130.04 01 p1 6/2021
FLOOR, ASSY, RH
1 84401764 1 SHEET RH
2 84324324 1 LEAF SPRING RH
5 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8

HEADER
58.130.04 02 p1 6/2021
FLOOR, ASSY, OUTER RH

58.130.04 02 p1 6/2021
FLOOR, ASSY, OUTER RH
1 47428304 1 SHEET RH, Outer

2 84324324 1 LEAF SPRING RH
5 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8
6 47428296 1 PLATE
7 445394 5 RIVET Pop, 3/16" x 1/2" OAL

HEADER
58.130.04 03 p1 6/2021
FLOOR, ASSY, CENTER

58.130.04 03 p1 6/2021
FLOOR, ASSY, CENTER
1 84401760 1 SHEET Center

2 84324326 1 LEAF SPRING Center
5 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8

HEADER
58.130.04 04 p1 6/2021
FLOOR, ASSY, LH
58.130.04 04 p1 6/2021
FLOOR, ASSY, LH
1 84401763 1 SHEET LH
2 84324323 1 LEAF SPRING LH
5 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8

HEADER
58.130.04 05 p1 6/2021
FLOOR, ASSY, LH END

58.130.04 05 p1 6/2021
FLOOR, ASSY, LH END
1 47428302 1 SHEET LH, Outer

2 84324323 1 LEAF SPRING LH
5 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8
6 47428296 1 PLATE
7 445394 5 RIVET Pop, 3/16" x 1/2" OAL

HEADER
58.130.04 06 p1 6/2021
TOOL BOX, ASSY

58.130.04 06 p1 6/2021
TOOL BOX, ASSY
1 84350047 1 BRACKET
2 87400261 1 TOOL BOX
3 86508947 1 LINCH PIN 18.8mm OD
6 9706690 4 NUT M8 x 1.25, Cl 8

GRAIN HEADER
58.131.01 01 p1 6/2021
DIVIDER ASSEMBLY, LEFT HAND

58.131.01 01 p1 6/2021
DIVIDER ASSEMBLY, LEFT HAND
1 84137065 1 DIVIDER Left Hand

2 210022 2 BUSHING Left Hand Divider
4 354360 1 BOLT Hex, M16 x 2 x 130mm, Cl 8.8
5 84173955 1 SPACER 11mm ID x 30mm OD x 55mm L Stepped, Wide/Dual
Drive
6 84306410 1 LINKAGE Left Hand
7 84396244 1 LINKAGE If required
10 100016 3 NUT M10 x 1.5, Cl 8
11 84306514 1 LINKAGE Left Hand
12 84137057 1 SPACER 11mm ID x 25mm OD x 50.8mm L Lower Pivot
13 43144 1 BOLT Hex, M10 x 70mm, Cl 8.8
15 84173224 1 DIVIDER Left Hand
16 87736718 1 DIVIDER POINT
17 84147660 1 PLATE Left Hand
18 120062 2 BOLT Hex, M8 x 70mm, Cl 8.8
20 120104 4 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
21 87488952 1 DEFLECTOR Crop
22 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8
24 84137037 1 SPACER 17mm ID x 29.98mm OD x 93.15mm L Lower Pivot

GRAIN HEADER
58.131.01 02 p1 6/2021
DIVIDER ASSEMBLY, LONG, LEFT HAND

58.131.01 02 p1 6/2021
DIVIDER ASSEMBLY, LONG, LEFT HAND
1 84308107 1 TUBE Long Divider, Left Hand

3 120061 2 BOLT Hex, M8 x 60mm L, Cl 8.8
5 120092 1 BOLT M16 x 70mm, Cl 8.8
8 100016 1 NUT M10 x 1.5, Cl 8
9 496-21053 1 WASHER 17/32" x 1 1/16" x .134"
10 86508731 1 BOLT Hex, 1/2 - 13" x 7", Gr 8
11 1316731C1 1 SPECIAL NUT
12 84306385 1 SPRING For Double Hook Design Refer to SB 2011/6
HDRUP00311
13 9706685 1 NUT Hex, 12mm D, Cl 8
14 84254734 1 DIVIDER POINT Long, Left Hand
15 120104 5 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8

GRAIN HEADER
58.131.02 01 p1 6/2021
DIVIDER ASSEMBLY, RIGHT HAND

58.131.02 01 p1 6/2021
2 84137037 1 SPACER 17mm ID x 29.98mm OD x 93.15mm L Lower Pivot
4 354360 1 BOLT Hex, M16 x 2 x 130mm, Cl 8.8
5 84137066 1 DIVIDER Right Hand
6 210022 2 BUSHING Right Hand Divider
7 337475 5 NUT M12, Cl 10
10 100016 3 NUT M10 x 1.5, Cl 8
11 84296541 1 DIVIDER Right Hand
12 84137057 1 SPACER 11mm ID x 25mm OD x 50.8mm L Lower Pivot
13 43144 1 BOLT Hex, M10 x 70mm, Cl 8.8
15 84173226 1 DIVIDER Right Hand; Single Drive
15 84180307 1 DIVIDER Right Hand; Double Drive
16 87736718 1 DIVIDER POINT Right Hand
17 84147660 1 PLATE Right Hand
18 120062 2 BOLT Hex, M8 x 70mm, Cl 8.8
20 120104 3 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
22 86629542 2 LOCK NUT M8 x 1.25, Cl 8.8
24 84306495 1 LINKAGE Right Hand

GRAIN HEADER
58.131.02 01 p2 6/2021

58.131.02 01 p2 6/2021
25 84164504 1 SPACER 11mm ID x 25mm OD x 37mm L Stepped

28 86512447 1 CARRIAGE BOLT Short Square Neck, M10 x 60mm, Class 8.8
30 84396838 1 LINK
31 412672 1 LOCK NUT Hex, M12 x 1.75, Cl 10
32 334682 1 CARRIAGE BOLT Sht Nk, M12 x 1.75 x 50mm, Cl 8.8, Full Thd
33 328754 4 CARRIAGE BOLT M12 x 1.75 x 40mm, Cl 8.8 (Not Shown)

GRAIN HEADER
58.131.02 02 p1 6/2021
DIVIDER ASSEMBLY, LONG, RIGHT HAND

58.131.02 02 p1 6/2021
DIVIDER ASSEMBLY, LONG, RIGHT HAND
1 84308107 1 TUBE Long Divider, Right Hand

3 120061 2 BOLT Hex, M8 x 60mm L, Cl 8.8
5 120092 1 BOLT M16 x 70mm, Cl 8.8
8 100016 1 NUT M10 x 1.5, Cl 8
9 496-21053 1 WASHER 17/32" x 1 1/16" x .134"
10 86508731 1 BOLT Hex, 1/2 - 13" x 7", Gr 8
11 1316731C1 1 SPECIAL NUT
12 84306385 1 SPRING
13 9706685 1 NUT Hex, 12mm D, Cl 8
14 84256951 1 DIVIDER POINT Long, Right Hand
15 120104 5 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8

GRAIN HEADER
58.131.02 03 p1 6/2021
DIVIDER, ASSY, RIGHT HAND, DOUBLE DRIVE

58.131.02 03 p1 6/2021
1 84282283 1 DIVIDER RH
2 210022 2 BUSHING
3 84180307 1 DIVIDER RH, Incl 4 - 5
4 44912093 4 INSERT M8
5 84302096 2 SPACER
7 120103 4 BOLT M8 x 1.25 x 16mm, Cl 8.8
8 84137057 1 SPACER 11mm ID x 25mm OD x 50.8mm L
9 43144 1 BOLT Hex, M10 x 70mm, Cl 8.8
11 100016 3 NUT M10 x 1.5, Cl 8
12 120062 3 BOLT Hex, M8 x 70mm, Cl 8.8
13 86629542 3 LOCK NUT M8 x 1.25, Cl 8.8
14 84137037 1 SPACER 17mm ID x 29.98mm OD x 93.15mm L
16 354360 1 BOLT Hex, M16 x 2 x 130mm, Cl 8.8
18 84147660 1 PLATE
20 84306405 1 LINKAGE RH
21 84306495 1 LINKAGE RH
26 87015731 2 BOLT M8 x 1.25 x 55.45mm OAL, Cl 8.8, Full Thd

HEADER
58.131.02 03 p2 6/2021

58.131.02 03 p2 6/2021

HEADER
58.131.03 p1 6/2021
DIVIDER ASSEMBLY, EXTENDED

58.131.03 p1 6/2021
DIVIDER ASSEMBLY, EXTENDED
1 84229083 2 DIVIDER Extended. Inc. 2-4

2 369441A1 1 DECAL White
3 84229093 1 DIVIDER POINT Point
4 84229082 1 ROD Extended
7 84147660 2 PLATE
8 120062 4 BOLT Hex, M8 x 70mm, Cl 8.8

GRAIN HEADER
58.131.04 p1 6/2021
AHHC SENSOR/FEELER NARROW, ASSEMBLY

58.131.04 p1 6/2021
AHHC SENSOR/FEELER NARROW, ASSEMBLY
1 47851105 2 ARM Feeler

4 118490 2 NUT M12 x 1.75, Cl 8
5 47373632 2 SKID/SHOE
6 84361606 4 WEAR PLATE
9 43362 8 NUT M8 x 1.25, Cl 10
10 47461740 2 TORSION SPRING
11 84361604 1 SHAFT
13 9706687 2 BOLT M12 x 1.75 x 30mm, Cl 8.8
14 84333216 1 SPACER
15 47419430 1 SENSOR CW Angle Position
17 86508567 2 BOLT Hex, M5 x 45mm, Cl 8.8
18 84338989 2 SKID/SHOE
20 84599982 2 BAR
21 647695 1 PIN 7.94mm OD x 69.85mm L

GRAIN HEADER
58.131.05 p1 6/2021
AHHC SENSOR/FEELER WIDE, ASSEMBLY

58.131.05 p1 6/2021
AHHC SENSOR/FEELER WIDE, ASSEMBLY
1 47851105 2 ARM Feeler

4 118490 2 NUT M12 x 1.75, Cl 8
5 47373632 2 SKID/SHOE
6 84361606 4 WEAR PLATE
9 43362 8 NUT M8 x 1.25, Cl 10
10 47461740 2 TORSION SPRING
11 84419744 1 SHAFT
13 9706687 2 BOLT M12 x 1.75 x 30mm, Cl 8.8
14 84333216 1 SPACER
15 47419430 1 SENSOR CW Angle Position
17 86508567 2 BOLT Hex, M5 x 45mm, Cl 8.8
18 84338989 2 SKID/SHOE
20 84599982 2 BAR
21 647695 1 PIN 7.94mm OD x 69.85mm L

GRAIN HEADER
58.131.05 01 p1 6/2021
KIT ARM PLASTIC HHC ARMS

58.131.05 01 p1 6/2021
KIT ARM PLASTIC HHC ARMS
1 47876649 1 KIT Incl 2 - 14

2 47876652 1 INSTRUCTION
3 84599982 8 BAR
4 47851105 8 ARM
7 118490 20 NUT M12 x 1.75, Cl 8
9 47466662 4 CLEVIS
10 47473855 4 CABLE
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L

GRAIN HEADER
58.145.01 p1 6/2021
SENSORS, REEL POSITION

58.145.01 p1 6/2021
SENSORS, REEL POSITION
1 84268280 1 ARM Reel Position Sensor

5 86977396 2 POTENTIOMETER 3000 Ohm, 16 VDC Reel Position
6 87715239 2 BUSHING
7 100037 3 LOCK NUT M10 x 1.5, Cl 8
8 43140 3 BOLT Hex, M10 x 1.5 x 30mm, Cl 8.8
9 140017 9 WASHER M10 x 20mm OD x 2mm Thk
10 86000439 2 SNAP RING 0.288" ID x 0.66" OD x 0.037" Thk, External
12 412255 4 BOLT Hex, M4 x 20mm, Cl 8.8
13 100012 4 NUT M4 x 0.7, Cl 8

GRAIN HEADER
58.208.01 01 p1 6/2021
END SHIELDING, RIGHT HAND

58.208.01 01 p1 6/2021
END SHIELDING, RIGHT HAND
1 84124326 1 HINGE End Shield

2 87752059 1 SHIELD End, Single Drive, Right Hand
2 84271829 1 DEFLECTOR End, Double Drive, Right Hand
3 87330714 1 ARTICULATED SHAFT End Shield
5 120103 8 BOLT M8 x 1.25 x 16mm, Cl 8.8
6 84134793 1 BRACKET U-Bolt
8 100016 4 NUT M10 x 1.5, Cl 8
9 130003 1 COTTER PIN 3mm OD x 30mm OAL
10 87719151 1 LOCK
11 47374245 1 GUIDE Lock
12 87031838 1 KNOB Lock
13 86511832 1 SCREW Phillips Drive, Pan HD, M6 x 30mm, Cl 4.8 Lock
14 9804277 2 FLANGE NUT Hex, M8 x 1.25, Cl 8 Lock

GRAIN HEADER
58.208.01 02 p1 6/2021
END SHIELDING, RIGHT HAND, DD

58.208.01 02 p1 6/2021
END SHIELDING, RIGHT HAND, DD
1 84124326 1 HINGE
2 84271829 1 DEFLECTOR RH Shield
3 87489687 1 BRACKET Stop
4 87330714 1 ARTICULATED SHAFT
7 120103 6 BOLT M8 x 1.25 x 16mm, Cl 8.8
8 87749134 1 PIN
9 84207826 1 MOUNT LH
11 120104 2 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
12 9706690 2 NUT M8 x 1.25, Cl 8
13 87725861 1 ROD
14 10796401 1 COTTER PIN M3.2 x 18
15 84150346 1 BRACKET
17 100016 4 NUT M10 x 1.5, Cl 8

HEADER
58.208.02 p1 6/2021
END SHIELDING, LEFT HAND

58.208.02 p1 6/2021
END SHIELDING, LEFT HAND
1 84124326 1 HINGE Shield

2 84173106 1 SHIELD Left Hand
3 87481333 1 BRACKET, SUPPORTING Stop
4 87330714 1 ARTICULATED SHAFT
5 10796401 1 COTTER PIN M3.2 x 18
7 120103 10 BOLT M8 x 1.25 x 16mm, Cl 8.8
8 87725861 1 ROD Prop
9 87749134 1 PIN
11 84150346 1 BRACKET
13 100016 4 NUT M10 x 1.5, Cl 8
14 84207826 1 MOUNT Left Hand
16 120104 2 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
17 9706690 2 NUT M8 x 1.25, Cl 8
18 87719151 1 LOCK
19 47374245 1 GUIDE Lock
20 87031838 1 KNOB Lock
21 86511832 1 SCREW Phillips Drive, Pan HD, M6 x 30mm, Cl 4.8 Lock Knob
22 9804277 2 FLANGE NUT Hex, M8 x 1.25, Cl 8 Lock

GRAIN HEADER
58.208.03 p1 6/2021
WEAR PLATES
58.208.03 p1 6/2021
WEAR PLATES
1 377580A1 41 SKID/SHOE Poly Wear Plate, 20 Foot Header

1 1 377581A1 AR SKID/SHOE Poly Wear Plate, Wide
2 84143805 1 SKID/SHOE Poly Wear Plate, Left Hand
3 47367901 1 SKID/SHOE Poly Wear Plate, Right Hand, Double Drive
3 84337069 1 SKID/SHOE Steel Wear Plate, Right Hand, Single Drive
3 84485626 1 SKID/SHOE Steel Wear Plate, Right Hand, Double Drive
3 84337990 1 SKID/SHOE Poly Wear Plate, Plastic, Right Hand, Single Drive
4 87613322 220 POP RIVET Pop, 6.35mm OD x 15.75mm L 20 Foot Header
(1) 8 Holes

GRAIN HEADER
58.208.04 01 p1 6/2021
SHOE, SKID ASSY, SD/DD NARROW

58.208.04 01 p1 6/2021
SHOE, SKID ASSY, SD/DD NARROW
1 NSS 57 NOT SOLD SEPARAT Skid Shoe Assy, Narrow, Incl 2 - 4

2 251206A2 1 SHOE
2 47547193 1 SKID/SHOE
3 377580A1 1 SKID/SHOE
5 NSS 1 NOT SOLD SEPARAT Skid Shoe Assy, RH, Incl 6 - 8
5 NSS 1 NOT SOLD SEPARAT Skid Shoe Assy, LH, Incl 6 - 8
10 87493466 1 SHIELD
11 377581A1 1 SKID/SHOE

GRAIN HEADER
58.208.04 02 p1 6/2021
SHOE, SKID ASSY, DD RH

58.208.04 02 p1 6/2021
SHOE, SKID ASSY, DD RH
1 NSS 1 NOT SOLD SEPARAT Skid Shoe Assy, RH DD, Incl 2 - 4

2 251206A2 1 SHOE
2 47547193 1 SKID/SHOE
3 377580A1 1 SKID/SHOE
5 NSS 1 NOT SOLD SEPARAT Skid Shoe Assy, RH, Incl 6 - 8
10 87493466 1 SHIELD
11 377581A1 1 SKID/SHOE

HEADER
58.500.01 p1 6/2021
MAIN SHAFT, SINGLE DRIVE
Quantities are per side for a double drive header

58.500.01 p1 6/2021
1 84212231 1 BRACKET Main Shaft

2 84294460 1 SHAFT Main, 604 mm, 20FT
2 84246661 1 SHAFT Main, 1366 mm, 25FT
2 84246657 1 SHAFT Main, 2128 mm, 30FT
2 84244432 1 SHAFT Main, 2890 mm, 35FT
3 86620027 4 FLANGED BEARING 80.02mm ID x 147.6mm OD x 4mm Thk
Main Shaft
4 84240146 1 BEARING 40mm ID x 80mm OD x 21mm W Incl Bushing & Lock
Nut Main Shaft, Includes Threaded Inner Race, Spanner Nut,
And Locking Ring, (Note: Original Bearing May Be A 3 Bolt
Locking Ring, Has Been Changed To 84240146
6 9706685 11 NUT Hex, 12mm D, Cl 8
7 84267177 1 SHIELD Main Shaft, Inc. 8-13
8 84270263 1 PLATE Shield
9 84270262 2 LATCH Shield
10 84270261 1 CONE Shield
11 84270259 1 CHAIN Shield
12 84270258 1 REINFORCEMENT Shield
13 84270257 8 RIVET Shield
15 84057307 1 BALL BEARING 40mm ID x 80mm OD x 21mm W Main Shaft
16 84176439 1 SPROCKET ASSY. 11T, RC80
17 86553411 1 SPACER 13.49mm ID x 18.97mm OD x 23.88mm L
19 86622548 1 SPACER 13.55mm ID x 19.01mm OD x 10.79mm L

GRAIN HEADER
58.500.01 p2 6/2021
Quantities are per side for a double drive header

58.500.01 p2 6/2021
20 87033816 1 CLIP
21 86508581 1 BOLT Hex, M12 x 90mm, Cl 8.8
22 87026147 1 SPRING Left Hand PTO Shield
23 170056 1 KEY 12mm W x 50mm OAL
24 84267176 1 PTO SHAFT
26 120104 2 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
28 9706687 4 BOLT M12 x 1.75 x 30mm, Cl 8.8
29 84313189 1 HOOK
30 291525 1 BRACKET
31 9706690 2 NUT M8 x 1.25, Cl 8

GRAIN HEADER
58.500.01 02 p1 6/2021
MAIN SHAFT - DD
58.500.01 02 p1 6/2021
MAIN SHAFT - DD
1 87489676 1 BRACKET
2 84244432 1 SHAFT 35 FT / L=2890
2 84246657 1 SHAFT 30 FT / L=2128
3 86620027 4 FLANGED BEARING 80.02mm ID x 147.6mm OD x 4mm Thk
4 84240146 1 BEARING 40mm ID x 80mm OD x 21mm W Incl Bushing & Lock
Nut With washer and nut adjustment
6 9706685 11 NUT Hex, 12mm D, Cl 8
7 84267177 1 SHIELD
8 84270263 1 PLATE
9 84270262 2 LATCH
10 84270261 1 CONE
11 84270259 1 CHAIN
12 84270258 1 REINFORCEMENT
13 84270257 8 RIVET
15 84057307 1 BALL BEARING 40mm ID x 80mm OD x 21mm W
16 84176439 1 SPROCKET ASSY.
17 9706690 11 NUT M8 x 1.25, Cl 8
18 84313189 1 HOOK
19 9706687 4 BOLT M12 x 1.75 x 30mm, Cl 8.8
21 120104 1 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
23 NH291525 1 EDGE
24 84400456 1 PTO SHAFT
25 84267176 1 PTO SHAFT
26 84475407 1 SPACER

HEADER
58.500.02 p1 6/2021
SHAFT, POWER TAKE-OFF

58.500.02 p1 6/2021
1 84267176 1 PTO SHAFT Inc. 2-34

2 87018246 2 SPIDER
3 87476730 1 YOKE
4 87586147 1 ROLL PIN
5 84175175 1 TUBE 1195 mm L
6 87586149 1 TUBE Inner PTO Shaft
7 87586150 1 ROLL PIN 8mm OD x 55mm L
8 87476733 1 YOKE
9 84270321 1 PTO CLUTCH Inc. 10-18
10 84270318 8 BOLT
11 84270317 1 FLANGE
12 84270316 1 BUSHING
13 84270315 2 DISC
14 84270314 1 HUB
15 84270313 1 PLATE
16 84270312 1 BAND
17 84270311 1 BELLEVILLE SPRING
18 84270319 1 KIT
19 84270308 1 SHIELD Complete, Inc. 20-29
20 87586153 1 BOOT
21 87586154 1 SUPPORT
22 278645 2 CHAIN
24 87586687 6 SCREW
25 84175172 1 SHIELD
26 86625852 1 RING NUT
27 84270320 1 CONE
28 87586694 1 DECAL Safety

GRAIN HEADER
58.500.02 p2 6/2021

58.500.02 p2 6/2021
29 849471 1 DANGER DECAL

30 87478394 1 YOKE
31 321204 1 LUBE NIPPLE M6 x 1.0 x 16mm OAL
32 84175173 1 PLUG
33 84175174 1 PLUG
35 87477399 1 REPAIR KIT Lock Back Ball Collar

GRAIN HEADER
58.500.02 01 p1 6/2021
SHAFT, PTO, ASN YGH231300
This PTO Is Used On The 30FT Double Drive And The 35FT Dingle Drive Head
58.500.02 01 p1 6/2021
SHAFT, PTO, ASN YGH231300
1 47881263 1 SHAFT PTO Assy, Incl 2 - 27

2 161742 2 SPIDER Cross And Bearing
3 PA556924 1 YOKE Inboard
4 412690 2 PIN 10mm OD x 65mm L, Slotted Spring
5 9833879 1 PTO SHAFT Inner Profile
6 NS 1 NOT SERVICED Profile And Sleeve
7 1326493C1 1 YOKE Inboard
8 84444123 1 PTO CLUTCH Free Motion
9 47947983 1 GUARD Cone
10 728164 2 RING Bearing Ring
11 47947984 1 TUBE Outer Guard
12 47947985 1 TUBE Inner Guard
13 84444125 1 RING Support Bearing
14 86597706 2 SCREW 10mm
15 849471 1 DANGER DECAL Outer, Incl In Ref 11
16 849472 1 DANGER DECAL Inner, Incl In Ref 6
17 379650 2 CHAIN Retraint
18 84444126 1 PROTECTING COVER Guard Cone
19 456679 2 COLLAR Reinforcing
20 84444121 1 PROTECTING COVER Inner Guard Half, Incl Ref 10, 12 - 14,
17, 18, 22
21 86525265 1 KIT Applies To Ref 1
22 86520062 1 DECAL European
23 47944807 1 YOKE 1 3/8"
24 84444119 1 PTO SHAFT
25 47944805 1 SHAFT PTO, Half, Not shown
26 379650 2 CHAIN Incl In Ref 19
27 84287822 1 REPAIR KIT Applies To Ref 8

HEADER
58.500.03 p1 6/2021
PTO, 6 TEETH
58.500.03 p1 6/2021
PTO, 6 TEETH
1 84400456 1 PTO SHAFT Incl 2 - 30

2 87317006 1 PTO SHAFT Incl 4 - 15, 29, 30
3 84444119 1 PTO SHAFT Incl 16 - 28
4 84444122 1 YOKE
5 161742 1 SPIDER
6 150024 1 LUBE NIPPLE 45 Degree, M8 x 1
7 PA556924 1 YOKE
8 9833879 1 PTO SHAFT
9 412690 1 PIN 10mm OD x 65mm L, Slotted
10 9602979 1 CHAIN
11 84444120 1 PROTECTING COVER Incl 12 - 15
12 456679 1 COLLAR
13 728164 1 RING
14 86585706 1 SCREW Phillips Drive, Pan HD, M4 x 10mm, Cl 4.8
15 84444124 1 PROTECTING COVER
16 84444121 1 PROTECTING COVER Incl 17 - 20
17 84444126 1 PROTECTING COVER
18 728164 1 RING
19 456679 1 COLLAR
20 86585706 1 SCREW Phillips Drive, Pan HD, M4 x 10mm, Cl 4.8
21 84444123 1 PTO CLUTCH Z=6
22 161742 1 SPIDER
23 150024 1 LUBE NIPPLE 45 Degree, M8 x 1
24 379650 1 CHAIN
25 1326493C1 1 YOKE
26 9833876 1 PTO SHAFT
27 412690 1 PIN 10mm OD x 65mm L, Slotted
28 84444125 1 RING

HEADER
58.500.03 p2 6/2021
PTO, 6 TEETH
58.500.03 p2 6/2021
PTO, 6 TEETH
29 87316647 1 COLLAR Incl 4, 30

30 87316646 1 YOKE (8, 35)

HEADER
58.500.04 p1 6/2021
KIT, STD GUARD SINGLE DR 30FT

58.500.04 p1 6/2021
KIT, STD GUARD SINGLE DR 30FT
1 47762799 1 KIT Incl 2 - 15

2 84245171 1 GUARD RH Knife 3 in
3 87702974 4 GUARD Knife 3in
4 84422134 2 KNIFE CLIP
5 87702973 56 GUARD HT Knife 3in
6 86630786 28 KNIFE CLIP Heat Treated
7 86630787 28 KNIFE CLIP
10 100037 122 LOCK NUT M10 x 1.5, Cl 8
13 86619802 30 FLANGE NUT M10 x 1.5, Cl 8
15 48185466 1 KNIFE 30ft Course

58.500.05 p1 6/2021
KIT STD GUARD SINGLE DR 35FT

58.500.05 p1 6/2021
1 47762849 1 KIT Incl 2 - 15

2 84245171 1 GUARD RH Knife 3in
3 87702974 4 GUARD Knife 3 in
4 84422134 2 KNIFE CLIP High
5 87702973 66 GUARD Guard HT Knife 3in
7 86630787 33 KNIFE CLIP Pressure Bar Std
8 84422992 2 ADJUSTING PLATE Plate
10 100037 142 LOCK NUT M10 x 1.5, Cl 8
13 86619802 35 FLANGE NUT M10 x 1.5, Cl 8
15 48185464 1 KNIFE 35ft Course

58.500.06 p1 6/2021

58.500.06 p1 6/2021
1 47762798 1 KIT Incl 2 - 15

3 87702974 4 GUARD
4 84422134 2 KNIFE CLIP
5 87702973 46 GUARD
7 86630787 23 KNIFE CLIP Press Bar
10 100037 102 LOCK NUT M10 x 1.5, Cl 8
13 86619802 25 FLANGE NUT M10 x 1.5, Cl 8
15 48185468 1 KNIFE Segmented 25ft Coarse

58.500.07 p1 6/2021

58.500.07 p1 6/2021
1 47761085 1 KIT Incl 2 - 14

2 84245171 1 GUARD RH 3"
3 87702974 4 GUARD
4 84422134 2 KNIFE CLIP
5 87702973 56 GUARD
7 86630787 28 KNIFE CLIP Std
10 100037 122 LOCK NUT M10 x 1.5, Cl 8
13 86619802 30 FLANGE NUT M10 x 1.5, Cl 8

58.500.08 p1 6/2021
KIT STD GUARD DOUBLE DR 35FT

58.500.08 p1 6/2021
KIT STD GUARD DOUBLE DR 35FT
1 47762852 1 KIT Incl 2 - 19

2 87702974 7 GUARD
3 84422134 4 KNIFE CLIP
4 87702973 61 GUARD
6 86630787 31 KNIFE CLIP Pressure Bar Std
7 84396061 36 SHIM 31mm OD x 3.25mm Thk
8 87470814 1 KNIFE COVER
10 84184577 15 KNIFE CLIP
12 100037 141 LOCK NUT M10 x 1.5, Cl 8
15 86619802 35 FLANGE NUT M10 x 1.5, Cl 8
16 84225871 1 KNIFE COVER 3 Point
18 48185480 1 KNIFE LH 35ft Coarse
19 48185479 1 KNIFE RH 35ft Coarse

58.500.09 p1 6/2021
KIT STD GUARD SINGLE DRIVE 35FT

58.500.09 p1 6/2021
KIT STD GUARD SINGLE DRIVE 35FT
1 47761119 1 KIT Incl 2 - 14

2 84245171 1 GUARD HT Knife 3 in
3 87702974 4 GUARD HT Knife 3 in
4 84422134 2 KNIFE CLIP
5 87702973 66 GUARD
7 86630787 33 KNIFE CLIP Bar
10 100037 142 LOCK NUT M10 x 1.5, Cl 8
13 86619802 35 FLANGE NUT M10 x 1.5, Cl 8

58.500.10 p1 6/2021
STD GUARD DOUBLE DR 30FT

58.500.10 p1 6/2021
STD GUARD DOUBLE DR 30FT
1 47762851 1 KIT Incl 2 - 19

2 87702974 1 GUARD
3 84422134 4 KNIFE CLIP
4 87702973 51 GUARD
6 86630787 26 KNIFE CLIP Pressure Bar STD
7 84396061 31 SHIM 31mm OD x 3.25mm Thk
8 87470814 1 KNIFE COVER Overlap
9 84225871 1 KNIFE COVER 3 Point
10 84184577 13 KNIFE CLIP
12 100037 121 LOCK NUT M10 x 1.5, Cl 8
15 86619802 30 FLANGE NUT M10 x 1.5, Cl 8
18 48185478 1 KNIFE Segmented 30 FT LH Coarse
19 48185477 1 KNIFE Segmented 30 FT RH Coarse

58.500.11 p1 6/2021
KIT STANDARD GUARD SINGLE DRIVE 25FT.

58.500.11 p1 6/2021
KIT STANDARD GUARD SINGLE DRIVE 25FT.
1 47761082 1 KIT Incl 2-14

3 87702974 4 GUARD
4 84422134 2 KNIFE CLIP
7 86630787 23 KNIFE CLIP Plate
8 84422992 2 ADJUSTING PLATE Plate
10 100037 102 LOCK NUT M10 x 1.5, Cl 8
13 86619802 25 FLANGE NUT M10 x 1.5, Cl 8

58.500.12 p1 6/2021
PTO SHAFT HALF 1 3/8

58.500.12 p1 6/2021
PTO SHAFT HALF 1 3/8
1 47944805 1 SHAFT Incl 2 - 13

2 47966916 1 YOKE
3 86997581 1 BEARING ASSY Cross and Bearing Kit
4 440437 1 PIN 10mm OD x 80mm L
5 87053085 1 YOKE
6 47999172 1 INNER SHIELD Inner Profile
7 48087503 1 SHIELD Cone Guard 10 Rib
8 87022025 1 TUBE 72 mm ID x 78 mm OD x 265 mm L Guard Tube Outer
9 411728 1 BEARING WASHER
10 379650 1 CHAIN
11 86597706 1 SCREW 10mm
13 456679 1 COLLAR

GRAIN HEADER
SECTION INDEX
ACCESSORIES
88.035.01 DIA KIT, CUTTERBAR SUSPENSION, OPTIONAL, DD
88.058.01 DIA KIT, LONG DIVIDER
88.058.02 KIT, CONVERSION FOR 21/23/2500 COMBINES
88.058.03 DIA KIT, THIRD STRIPPER 20FT
88.058.04 DIA, KIT, SUSPENSION SINGLE DRIVE
88.058.05 03 DIA KIT, AHHC 30FT - 35FT, DOUBLE DRIVE
88.058.05 04 KIT RIGID HHC AUGER 20-25 FT
88.058.07 DIA KIT, THIRD STRIPPER KIT, SD/DD
88.058.08 DIA KIT, CROPLIFTERS, STANDARD GUARD, SD/DD
88.058.10 DIA KIT, AUGER FLIGHT EXTENSION, PRIMARY, SD/DD
88.058.11 DIA KIT, CENTER FLIGHT EXTENSION, SECONDARY, SD/DD
88.058.12 02 CUTTER BAR REBUILD KIT STUB DRIVE SINGLE DRIVE 20 FT W/KNIFE
88.058.12 02 CUTTER BAR REBUILD KIT STUB GUARD SINGLE DRIVE 25FT W/KNIFE
88.058.12 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DR 30FT W/KNIFE
88.058.12 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/KNIFE
88.058.13 01 CUTTER BAR REBUILD KIT STD GUARD SINGLE DR 30FT W/O KNIFE
88.058.13 01 CUTTER BAR REBUILD KIT STD. GUARD SINGLE DRIVE 20FT WITHOUT KNIFE
SECTION INDEX
ACCESSORIES
88.058.13 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 30FT W/O/ KNIFE
88.058.13 03 CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/O KNIFE
88.058.16 KIT MAINT. FLEX HEADER SINGLE DRIVE
88.058.17 KIT MAINT. FLEX HEADER DOUBLE DRIVE
88.058.18 TOOL BOX
88.058.19 DIA KIT, CROP LIFTERS AND SUPPORT
88.058.20 KIT POLY POINT
88.058.21 KIT HHC WIRE HARNESS CLAMPS
88.058.22 KIT 3000 SERIES WOBBLEBOX OVERHAUL
88.058.23 KIT DIVIDER ASSY LH CIH
88.058.24 KIT DIVIDER ASSY RH
88.058.25 KIT CROP DEFLECTOR
88.058.26 KIT, SUGER SWEEPER
88.058.27 KIT RIGID HHC AUGER DD 30-35 FT
88.058.27 01 KIT RIGID HHC KIT AUGER SD 30-35
88.058.30 KIT, CUTTERBAR ANGLE REDUCTION 20FT 25FT
88.058.37 KIT, KNIFE SPEED 500RPM
88.058.38 KIT, SKID/SHOE UPGRADE DUAL DRIVE
88.058.39 KIT, SKID/SHOE UPGRADE SINGLE DRIVE
88.058.40 AA KIT, SKID/SHOE POLY

88.035.01 p1 6/2021
DIA KIT, CUTTERBAR SUSPENSION, OPTIONAL, DD

88.035.01 p1 6/2021
DIA KIT, CUTTERBAR SUSPENSION, OPTIONAL, DD
1 1 84495972 1 KIT Cutterbar Suspension Optional, Incl 2 - 4

1 2 84495970 1 KIT Cutterbar Suspension Optional, Incl 2 - 4
2 47386609 1 INSTRUCTION Hydraulic Float
3 84495968 1 LINKAGE Assy, 30FT Double Drive
3 84495967 1 LINKAGE Assy, 35FT Double Drive
4 47395639 1 HOSE KIT Hydraulic System
(1) 30FT Header
(2) 35FT Header

HEADER
88.058.01 p1 6/2021
DIA KIT, LONG DIVIDER

88.058.01 p1 6/2021
DIA KIT, LONG DIVIDER
1 84308791 1 DIA KIT, HARVESTER Long Divider

3 120061 4 BOLT Hex, M8 x 60mm L, Cl 8.8
5 120092 2 BOLT M16 x 70mm, Cl 8.8
8 100016 2 NUT M10 x 1.5, Cl 8
10 46041 2 EYEBOLT
11 84308107 2 TUBE
12 84408927 2 SPRING Extension, 17.461mm OD x 210.5mm L
13 9628503 4 NUT 3/8" - 16, Gr 5
14 84256951 1 DIVIDER POINT Right Hand
14 84254734 1 DIVIDER POINT Left Hand
15 120104 10 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
16 84396244 2 LINKAGE

GRAIN HEADER
88.058.02 p1 6/2021
KIT, CONVERSION FOR 21/23/2500 COMBINES

88.058.02 p1 6/2021
KIT, CONVERSION FOR 21/23/2500 COMBINES
1 84480201 1 CONVERSION KIT 21/23/2500 Combines, Inc. 2, 15, 18

2 84478408 1 SERVICE KIT Frame, Adapter, Inc. 3 And 4
3 84192170 1 ADAPTER
4 84423629 1 SERVICE KIT Adapter Kit Hardware, Inc. 5 - 14
5 87061093 2 LATCH Header Adapter
8 374887 4 BOLT Hex, M12 x 1.75 x 100mm, Cl 8.8
9 412672 4 LOCK NUT Hex, M12 x 1.75, Cl 10
11 43168 3 BOLT Hex, M16 x 40mm, Cl 8.8
12 84478409 1 BRACKET
14 120104 2 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
15 84480170 1 SERVICE KIT Adapter, Electrical, Inc. 16 And 17
16 84473623 1 WIRE HARNESS Adapter Kit
17 86616380 2 SENSOR Field Tracker
18 84479134 1 PTO SHAFT Inc. 19
19 84481701 1 YOKE 4-S4 RT Ball 1-1/8 Hex, (Not Shown)

GRAIN HEADER
88.058.03 p1 6/2021
DIA KIT, THIRD STRIPPER 20FT

88.058.03 p1 6/2021
DIA KIT, THIRD STRIPPER 20FT
1 84302551 1 KIT Third Stripper 20 ft

2 84577045 1 INSTRUCTION Assy, Third Stripper Kit
3 84323936 2 STRIPPER

GRAIN HEADER
88.058.04 p1 6/2021
DIA, KIT, SUSPENSION SINGLE DRIVE

88.058.04 p1 6/2021
DIA, KIT, SUSPENSION SINGLE DRIVE
1 84416272 1 KIT Incl 2 - 4

3 47395639 1 HOSE KIT
4 84416270 1 LINKAGE

88.058.05 01 p1 6/2021
DIA KIT, AHHC 20FT - 25FT, SINGLE DRIVE

88.058.05 01 p1 6/2021
1 47473023 1 SERVICE KIT AHHC Kit, 20ft - 25ft Incl 2 - 22

2 47437106 1 INSTRUCTION Rigid AHHC
3 47463822 1 ARM Assy, Auger, Narrow
4 47463821 3 ARM Assy, Auger, Wide
5 84537480 2 WIRE HARNESS Height Extension
6 84483640 2 WIRE HARNESS Height/Tilt Extension
7 47466662 4 CLEVIS
8 47473855 4 CABLE
11 118490 12 NUT M12 x 1.75, Cl 8
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L
16 86050346 4 CLAMP 9.5mm, Coat, 7.1mm Bolt Hole, P Type
18 120100 6 BOLT M6 x 20mm, Cl 8.8
19 353308 6 NUT Hex, M6 x 1
22 47425969 2 PLUG

HEADER
88.058.05 02 p1 6/2021

88.058.05 02 p1 6/2021
1 47473028 1 SERVICE KIT AHHC, 30ft - 35ft, SD, Incl 2 - 22

2 47437106 1 INSTRUCTION AHHC, Single Drive
3 47463822 1 ARM Assy, Auger, Narrow
4 47463821 3 ARM Assy, Auger, Wide
7 47466662 4 CLEVIS
8 47473855 4 CABLE
11 118490 12 NUT M12 x 1.75, Cl 8
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L
18 120100 8 BOLT M6 x 20mm, Cl 8.8
19 353308 8 NUT Hex, M6 x 1
22 47425969 2 PLUG

HEADER
88.058.05 03 p1 6/2021
DIA KIT, AHHC 30FT - 35FT, DOUBLE DRIVE

88.058.05 03 p1 6/2021
DIA KIT, AHHC 30FT - 35FT, DOUBLE DRIVE
1 47473027 1 DIA KIT, HARVESTER AHHC, Operating In Rigid Mode, Incl 2 -

21
2 47437106 1 INSTRUCTION Rigid AHHC Flex Auger
3 47463822 2 ARM Assy, Wide
4 47463821 2 ARM Assy, Narrow
7 47466662 4 CLEVIS
8 47473855 4 CABLE
11 118490 12 NUT M12 x 1.75, Cl 8
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L
18 120100 6 BOLT M6 x 20mm, Cl 8.8
19 353308 6 NUT Hex, M6 x 1
21 47425969 2 PLUG Sensor

HEADER
88.058.05 04 p1 6/2021
KIT RIGID HHC AUGER 20-25 FT

88.058.05 04 p1 6/2021
KIT RIGID HHC AUGER 20-25 FT
1 47850157 1 KIT Incl 2 - 22

3 47463822 1 ARM Narrow
4 47463821 3 ARM Wide
5 84537480 2 WIRE HARNESS Height Ext
6 84483640 2 WIRE HARNESS HT/Tilt Ext
7 47466662 4 CLEVIS
8 47473855 4 CABLE
11 100038 12 LOCK NUT M12 x 1.75, Cl 8
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L
18 120100 6 BOLT M6 x 20mm, Cl 8.8
19 353308 6 NUT Hex, M6 x 1

HEADER
88.058.07 p1 6/2021
DIA KIT, THIRD STRIPPER KIT, SD/DD

88.058.07 p1 6/2021
DIA KIT, THIRD STRIPPER KIT, SD/DD
1 84302549 1 KIT 30ft, Third Stripper Kit, Incl 2 - 4

1 84302548 1 KIT 35ft, Third Stripper Kit, Incl 2 - 4
2 84577045 1 INSTRUCTION Assy, Third Stripper Kit
3 84323936 2 STRIPPER
4 84323938 2 STRIPPER 30ft Double Drive
4 84323937 2 STRIPPER 35ft Double Drive

HEADER
88.058.08 p1 6/2021
DIA KIT, CROPLIFTERS, STANDARD GUARD, SD/DD

88.058.08 p1 6/2021
DIA KIT, CROPLIFTERS, STANDARD GUARD, SD/DD
1 84134170 1 DIA KIT, HARVESTER Croplifters, Standard Guard, Incl 2 - 3

1 84143555 1 DIA KIT, HARVESTER Croplifters, Standard Guard, Incl 2 - 3
2 87470448 1 SUPPORT

88.058.10 p1 6/2021
DIA KIT, AUGER FLIGHT EXTENSION, PRIMARY, SD/DD

88.058.10 p1 6/2021
DIA KIT, AUGER FLIGHT EXTENSION, PRIMARY, SD/DD
1 84265932 1 DIA KIT, HARVESTER Auger Flight Extension, Incl 2 - 9

2 84224152 1 AUGER FLIGHT
3 84224155 1 AUGER FLIGHT
5 100016 4 NUT M10 x 1.5, Cl 8
8 87533547 10 LOCK NUT Prev Torque, M12, 1.75mm Pitch, Cl 10
9 300388 10 BOLT Hex, M12 x 1.75 x 25mm, Cl 8.8

GRAIN HEADER
88.058.11 p1 6/2021
DIA KIT, CENTER FLIGHT EXTENSION, SECONDARY, SD/DD

88.058.11 p1 6/2021
DIA KIT, CENTER FLIGHT EXTENSION, SECONDARY, SD/DD
1 87016168 1 DIA KIT, HARVESTER Center Flighting Extension, Incl 2 - 9

2 87017767 1 AUGER FLIGHT RH
3 87017766 1 AUGER FLIGHT LH
4 412672 6 LOCK NUT Hex, M12 x 1.75, Cl 10
6 300388 6 BOLT Hex, M12 x 1.75 x 25mm, Cl 8.8
9 100016 2 NUT M10 x 1.5, Cl 8

GRAIN HEADER
88.058.12 01 p1 6/2021
CUTTER BAR REBUILD KIT STD GUARD SINGLE DR 20FT W/KNIFE

88.058.12 01 p1 6/2021
1 1 47762795 1 KIT Includes 2 - 15

2 87702974 4 GUARD 3"
3 84422134 2 KNIFE CLIP
6 100037 82 LOCK NUT M10 x 1.5, Cl 8
7 87702973 36 GUARD 3"
9 86630787 18 KNIFE CLIP
11 86619802 20 FLANGE NUT M10 x 1.5, Cl 8
12 84245171 1 GUARD RH 3"
15 47601030 1 KNIFE ASSY 20ft course
(1) The Knife Head does not have the Connecting Block. Need to Reuse Old, or Order the one Needed (M12 or M16 holes).

88.058.12 01 p1 6/2021

88.058.12 01 p1 6/2021
1 47762798 1 KIT Includes 2 - 15

2 84245171 1 GUARD RH Guard 3"
3 87702974 4 GUARD Guard 3"
4 84422134 2 KNIFE CLIP
5 87702973 46 GUARD
7 86630787 23 KNIFE CLIP
10 100037 102 LOCK NUT M10 x 1.5, Cl 8
13 86619802 25 FLANGE NUT M10 x 1.5, Cl 8
15 47601027 1 KNIFE ASSY

HEADER
88.058.12 01 p1 6/2021

88.058.12 01 p1 6/2021
1 47762799 1 KIT Includes 2 - 15

2 84245171 1 GUARD RH 3"
3 87702974 4 GUARD
4 84422134 2 KNIFE CLIP
5 87702973 56 GUARD
7 86630787 28 KNIFE CLIP
10 100037 122 LOCK NUT M10 x 1.5, Cl 8
13 86619802 30 FLANGE NUT M10 x 1.5, Cl 8
15 47601025 1 KNIFE ASSY

HEADER
88.058.12 01 p1 6/2021

88.058.12 01 p1 6/2021
1 47762849 1 KIT Includes 2 - 20

2 84245171 1 GUARD RH 3"
3 87702974 4 GUARD
4 84422134 2 KNIFE CLIP
5 87702973 66 GUARD
7 86630787 33 KNIFE CLIP
10 100037 142 LOCK NUT M10 x 1.5, Cl 8
13 86619802 35 FLANGE NUT M10 x 1.5, Cl 8
15 47601023 1 KNIFE ASSY 35FT Coarse, Incl 16 - 20
16 47601016 1 KNIFE Head Assy
17 84585643 1 KNIFE Center Assy
19 84585648 1 KNIFE Tail Assy
20 84585647 4 SERVICE KIT Knife, Splice

88.058.12 02 p1 6/2021
CUTTER BAR REBUILD KIT STUB DRIVE SINGLE DRIVE 20 FT W/KNIFE

88.058.12 02 p1 6/2021
CUTTER BAR REBUILD KIT STUB DRIVE SINGLE DRIVE 20 FT W/KNIFE
1 47762854 1 KIT Incl 2 - 19

2 84409315 1 GUARD
3 84409304 3 GUARD
4 84409307 36 GUARD
5 84395857 56 SHIM 33mm OD x 2.1mm Thk
6 84409311 3 KNIFE CLIP
7 84396057 36 KNIFE CLIP
9 84409313 1 KNIFE CLIP
10 84396059 36 STEEL PLATE
11 84396061 40 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD
14 100037 82 LOCK NUT M10 x 1.5, Cl 8
16 86619802 40 FLANGE NUT M10 x 1.5, Cl 8
19 1 47601030 1 KNIFE ASSY
(1) The Knife Head does not have the Connecting Block. Need to Reuse Old, or Order the one Needed (M12 or M16 holes).

88.058.12 02 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD SINGLE DR 30FT W/KNIFE

88.058.12 02 p1 6/2021
1 47762859 1 KIT Includes 2 - 19

2 84409315 1 GUARD LH
3 84409304 3 GUARD
4 84409307 56 GUARD
5 84395857 86 SHIM 33mm OD x 2.1mm Thk 2MM
6 84409311 3 KNIFE CLIP
7 84396057 56 KNIFE CLIP
9 84409313 1 KNIFE CLIP
10 84396059 56 STEEL PLATE
11 84396061 60 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD RH 3"
14 100037 122 LOCK NUT M10 x 1.5, Cl 8
17 86619802 60 FLANGE NUT M10 x 1.5, Cl 8
19 47601025 1 KNIFE ASSY

88.058.12 02 p1 6/2021

88.058.12 02 p1 6/2021
1 47762867 1 KIT Includes 2 - 24

2 84409315 1 GUARD LH
3 84409304 3 GUARD
4 84409307 66 GUARD
6 84409311 3 KNIFE CLIP
7 84396057 66 KNIFE CLIP
9 84409313 1 KNIFE CLIP
10 84396059 66 STEEL PLATE
11 84396061 70 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD 3"
14 100037 142 LOCK NUT M10 x 1.5, Cl 8
17 86619802 70 FLANGE NUT M10 x 1.5, Cl 8
19 47601023 1 KNIFE ASSY 35FT Coarse, Incl 20 - 24
20 47601016 1 KNIFE Head Assy
23 84585648 1 KNIFE Tail Assy
24 84585647 4 SERVICE KIT Knife, Splice

88.058.12 02 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD SINGLE DRIVE 25FT W/KNIFE
88.058.12 02 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD SINGLE DRIVE 25FT W/KNIFE
1 47762856 1 KIT Includes 2 - 19

2 84409315 1 GUARD LH Stub
3 84409304 3 GUARD
4 84409307 46 GUARD
6 84409311 3 KNIFE CLIP
7 84396057 46 KNIFE CLIP
10 84396059 46 STEEL PLATE
11 84396061 50 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD RH
14 100037 102 LOCK NUT M10 x 1.5, Cl 8
16 86619802 50 FLANGE NUT M10 x 1.5, Cl 8
19 47601027 1 KNIFE ASSY 25FT Coarse

88.058.12 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DR 30FT W/KNIFE

88.058.12 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DR 30FT W/KNIFE
1 47762870 1 KIT Includes 2 - 22

2 84409315 1 GUARD LH
3 84409304 6 GUARD
4 84409307 52 GUARD
6 84409311 7 KNIFE CLIP
7 84396057 52 KNIFE CLIP
9 84409313 1 KNIFE CLIP
10 84396059 52 STEEL PLATE
11 84396061 61 SHIM 31mm OD x 3.25mm Thk
13 86619802 60 FLANGE NUT M10 x 1.5, Cl 8
15 100037 121 LOCK NUT M10 x 1.5, Cl 8
19 9706685 10 NUT Hex, 12mm D, Cl 8
21 84170820 1 KNIFE LH
22 84170823 1 KNIFE RH

88.058.12 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/KNIFE
88.058.12 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/KNIFE
1 47762874 1 KIT Includes 2 - 21

2 84409315 1 GUARD LH
3 84409304 6 GUARD
4 84409307 62 GUARD
6 84409311 7 KNIFE CLIP
7 84396057 62 KNIFE CLIP
9 84409313 1 KNIFE CLIP
10 84396059 62 STEEL PLATE
11 84396061 71 SHIM 31mm OD x 3.25mm Thk
12 84395855 1 GUARD
14 86619802 70 FLANGE NUT M10 x 1.5, Cl 8
16 100037 141 LOCK NUT M10 x 1.5, Cl 8
20 87489671 1 KNIFE Soybean LH
21 87493457 1 KNIFE Soybean RH

88.058.12 04 p1 6/2021
CUTTER BAR REBUILD KIT STD GUARD DOUBLE DR 30FT W/KNIFE

88.058.12 04 p1 6/2021
1 47762851 1 KIT Includes 2 - 19

2 87702974 7 GUARD 3"
3 84422134 4 KNIFE CLIP
4 87702973 51 GUARD 3"
6 86630787 26 KNIFE CLIP Pressure Bat Std
10 84184577 13 KNIFE CLIP
12 100037 121 LOCK NUT M10 x 1.5, Cl 8
15 86619802 30 FLANGE NUT M10 x 1.5, Cl 8
18 84170820 1 KNIFE LH
19 84170823 1 KNIFE RH

88.058.12 04 p1 6/2021

88.058.12 04 p1 6/2021
1 47762852 1 KIT Includes 2 - 18

2 87702974 7 GUARD 3"
3 84422134 4 KNIFE CLIP
4 87702973 61 GUARD 3"
6 86630787 31 KNIFE CLIP
7 84396061 36 SHIM 31mm OD x 3.25mm Thk
10 84184577 15 KNIFE CLIP
12 100037 141 LOCK NUT M10 x 1.5, Cl 8
15 86619802 35 FLANGE NUT M10 x 1.5, Cl 8
18 87489671 1 KNIFE LH
19 87493457 1 KNIFE RH

88.058.13 01 p1 6/2021
CUTTER BAR REBUILD KIT STD GUARD SINGLE DR 30FT W/O KNIFE
88.058.13 01 p1 6/2021
CUTTER BAR REBUILD KIT STD GUARD SINGLE DR 30FT W/O KNIFE
1 47761085 1 KIT Includes 2 - 14

2 84245171 1 GUARD 3"
3 87702974 4 GUARD 3"
4 84422134 2 KNIFE CLIP
5 87702973 56 GUARD 3"
7 86630787 28 KNIFE CLIP
10 100037 122 LOCK NUT M10 x 1.5, Cl 8
13 86619802 30 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 01 p1 6/2021
CUTTER BAR REBUILD KIT STD GUARD SINGLE DRIVE 25FT W/O KNIFE
88.058.13 01 p1 6/2021
1 47761082 1 KIT Includes 2 - 14

2 84245171 1 GUARD 3"
3 87702974 4 GUARD 3"
4 84422134 2 KNIFE CLIP
5 87702973 46 GUARD 3"
7 86630787 23 KNIFE CLIP
10 100037 102 LOCK NUT M10 x 1.5, Cl 8
13 86619802 25 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 01 p1 6/2021
88.058.13 01 p1 6/2021
1 47761119 1 KIT Inculdes 2 - 14

2 84245171 1 GUARD 3"
3 87702974 4 GUARD 3"
4 84422134 2 KNIFE CLIP
5 87702973 66 GUARD 3"
7 86630787 33 KNIFE CLIP
10 100037 142 LOCK NUT M10 x 1.5, Cl 8
13 86619802 35 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 01 p1 6/2021
CUTTER BAR REBUILD KIT STD. GUARD SINGLE DRIVE 20FT WITHOUT KNIFE
88.058.13 01 p1 6/2021
CUTTER BAR REBUILD KIT STD. GUARD SINGLE DRIVE 20FT WITHOUT KNIFE
1 47761081 1 KIT Includes 2 - 14

2 87702974 4 GUARD 3 inch Guard
3 84422134 2 KNIFE CLIP
6 100037 82 LOCK NUT M10 x 1.5, Cl 8
7 87702973 36 GUARD Knife 3"
9 86630787 18 KNIFE CLIP
11 86619802 20 FLANGE NUT M10 x 1.5, Cl 8
12 84245171 1 GUARD RH Knife 3"

88.058.13 02 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD SINGLE DRIVE 20FT W/O KNIFE
88.058.13 02 p1 6/2021
1 47761130 1 KIT Includes 2 - 18

2 84409315 1 GUARD LH
3 84409304 3 GUARD Stub
4 84409307 36 GUARD
6 84409311 3 KNIFE CLIP
7 84396057 36 KNIFE CLIP
10 84396059 36 STEEL PLATE
11 84396061 40 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD
14 100037 82 LOCK NUT M10 x 1.5, Cl 8
16 86619802 40 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 02 p1 6/2021
88.058.13 02 p1 6/2021
1 47761133 1 KIT Inculdes 2 - 18

2 84409315 1 GUARD LH
3 84409304 3 GUARD
4 84409307 46 GUARD
6 84409311 3 KNIFE CLIP
7 84396057 46 KNIFE CLIP
10 84396059 46 STEEL PLATE
11 84396061 50 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD
14 100037 102 LOCK NUT M10 x 1.5, Cl 8
16 86619802 50 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 02 p1 6/2021
88.058.13 02 p1 6/2021
1 47761134 1 KIT Includes 2 - 18

2 84409315 1 GUARD LH
3 84409304 3 GUARD
4 84409307 56 GUARD
6 84409311 3 KNIFE CLIP
7 84396057 56 KNIFE CLIP
10 84396059 56 STEEL PLATE
11 84396061 60 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD 3"
14 100037 122 LOCK NUT M10 x 1.5, Cl 8
17 86619802 60 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 02 p1 6/2021
88.058.13 02 p1 6/2021
1 47761135 1 KIT Includes 2 - 18

2 84409315 1 GUARD LH
3 84409304 3 GUARD
4 84409307 66 GUARD
6 84409311 3 KNIFE CLIP
7 84396057 66 KNIFE CLIP
10 84396059 66 STEEL PLATE
11 84396061 70 SHIM 31mm OD x 3.25mm Thk
12 84245171 1 GUARD RH
14 100037 142 LOCK NUT M10 x 1.5, Cl 8
17 86619802 70 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 30FT W/O/ KNIFE
88.058.13 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 30FT W/O/ KNIFE
1 47761136 1 KIT Includes 2 - 20

2 84409315 1 GUARD LH
3 84409304 6 GUARD
4 84409307 52 GUARD
5 84395857 82 SHIM 33mm OD x 2.1mm Thk 2 MM
6 84409311 7 KNIFE CLIP
7 84396057 52 KNIFE CLIP
10 84396059 52 STEEL PLATE
11 84396061 61 SHIM 31mm OD x 3.25mm Thk
13 86619802 60 FLANGE NUT M10 x 1.5, Cl 8
15 100037 121 LOCK NUT M10 x 1.5, Cl 8
19 9706685 10 NUT Hex, 12mm D, Cl 8

88.058.13 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/O KNIFE
88.058.13 03 p1 6/2021
CUTTER BAR REBUILD KIT STUB GUARD DOUBLE DRIVE 35FT W/O KNIFE
1 47761137 1 KIT Includes 2 - 19

2 84409315 1 GUARD LH
3 84409304 6 GUARD
4 84409307 62 GUARD
6 84409311 7 KNIFE CLIP
7 84396057 62 KNIFE CLIP
10 84396059 62 STEEL PLATE
11 84396061 71 SHIM 31mm OD x 3.25mm Thk
12 84395855 1 GUARD Triple Guard
14 86619802 70 FLANGE NUT M10 x 1.5, Cl 8
16 100037 141 LOCK NUT M10 x 1.5, Cl 8

88.058.13 04 p1 6/2021
CUTTER BAR REBUILD KIT STD GUARD DOUBLE DRIVE 30FT W/O KNIFE
88.058.13 04 p1 6/2021
1 47761128 1 KIT Includes 2 - 17

2 87702974 7 GUARD 3"
3 84422134 4 KNIFE CLIP
4 87702973 51 GUARD 3"
6 86630787 26 KNIFE CLIP
7 84396061 31 SHIM 31mm OD x 3.25mm Thk
10 84184577 13 KNIFE CLIP
12 100037 121 LOCK NUT M10 x 1.5, Cl 8
15 86619802 30 FLANGE NUT M10 x 1.5, Cl 8

88.058.13 04 p1 6/2021
88.058.13 04 p1 6/2021
1 47761129 1 KIT Includes 2 - 17

2 87702974 7 GUARD 3"
3 84422134 4 KNIFE CLIP
4 87702973 61 GUARD 3"
6 86630787 31 KNIFE CLIP
7 84396061 36 SHIM 31mm OD x 3.25mm Thk
10 84184577 15 KNIFE CLIP
12 100037 141 LOCK NUT M10 x 1.5, Cl 8
15 86619802 35 FLANGE NUT M10 x 1.5, Cl 8

88.058.16 p1 6/2021
KIT MAINT. FLEX HEADER SINGLE DRIVE

88.058.16 p1 6/2021
KIT MAINT. FLEX HEADER SINGLE DRIVE
1 47800625 1 KIT Includes 2 - 24

2 87702974 1 GUARD Knife 3 IN
4 84245171 1 GUARD RH Knife 3 IN
7 100037 8 LOCK NUT M10 x 1.5, Cl 8
8 87702973 8 GUARD HT Knife 3 IN
9 84467282 3 KNIFE SECTION OS CSB BH
10 84467292 2 KNIFE SECTION OS CST BH
12 87728905 25 KNIFE SECTION OS BT STD BH
14 84429102 50 LOCK NUT
17 321848A1 6 KNIFE CLIP Reinforcing 3 IN Knife Assemblies
18 84543491 1 KNIFE SECTION Half SM STD BH
20 740591 2 COTTER PIN M10 x 67
21 87620690 2 GUIDE Auger Finger Guide
22 120100 4 BOLT M6 x 20mm, Cl 8.8
24 84315756 12 NUT

GRAIN HEADER
88.058.17 p1 6/2021
KIT MAINT. FLEX HEADER DOUBLE DRIVE

88.058.17 p1 6/2021
KIT MAINT. FLEX HEADER DOUBLE DRIVE
1 47800626 1 KIT Includes 2 - 24

2 87702974 3 GUARD Knife 3IN
3 84225871 1 KNIFE COVER Knife 3 Point
5 87470814 1 KNIFE COVER Knife Overlap
8 100037 8 LOCK NUT M10 x 1.5, Cl 8
9 87702973 12 GUARD HT Knife 3IN
11 87470187 2 KNIFE SECTION OS BT CST BH
12 87470018 6 SCREW FLAT, M6 x 14.5mm, Cl 10.9
13 87470186 3 KNIFE SECTION OS BT CSB BH
14 84429102 50 LOCK NUT
18 87728905 25 KNIFE SECTION OS BT STD BH
20 740591 2 COTTER PIN M10 x 67
22 120100 4 BOLT M6 x 20mm, Cl 8.8
24 84315756 12 NUT

GRAIN HEADER
88.058.18 p1 6/2021
TOOL BOX
88.058.18 p1 6/2021
TOOL BOX
1 84350047 1 BRACKET Tool Box

2 87400261 1 TOOL BOX

GRAIN HEADER
88.058.19 p1 6/2021
DIA KIT, CROP LIFTERS AND SUPPORT

88.058.19 p1 6/2021
DIA KIT, CROP LIFTERS AND SUPPORT
1 84160118 1 DIA KIT, HARVESTER Crop Lifter, 20 And 25 Foot Header, Inc.
2-6, 8
1 84134170 1 DIA KIT, HARVESTER Crop Lifter, 30 Foot Header, Inc. 3-8
1 84143555 1 DIA KIT, HARVESTER Crop Lifter, 35 Foot Header, Inc.2-6, 8
2 87699398 2 SUPPORT Crop Lifter, 25 And 35 Foot Header
3 100016 8 NUT M10 x 1.5, Cl 8
5 43138 8 BOLT Hex, M10 x 20, Cl 8.8, Full Thd
7 84441549 2 SUPPORT Crop Lifter, 30 Foot Header
8 84134152 24 SERVICE KIT 20 And 25 Foot Header, Inc. 9-12
8 84134152 29 SERVICE KIT 30 Foot Header, Inc. 9-12
8 84134152 34 SERVICE KIT 35 Foot Header, Inc. 9-12
9 84134059 1 CROP LIFTER
12 9514326 1 NUT M10

GRAIN HEADER
88.058.20 p1 6/2021
KIT POLY POINT

88.058.20 p1 6/2021
KIT POLY POINT
1 47847930 1 KIT Incl 2 - 4

3 7120024 2 BOLT
5 84147660 1 PLATE Divider Point

GRAIN HEADER
88.058.21 p1 6/2021
KIT HHC WIRE HARNESS CLAMPS

88.058.21 p1 6/2021
KIT HHC WIRE HARNESS CLAMPS
1 47430753 1 KIT Incl 2 and 3

3 84356842 15 SPRING CLIP

GRAIN HEADER
88.058.22 p1 6/2021
KIT 3000 SERIES WOBBLEBOX OVERHAUL

88.058.22 p1 6/2021
KIT 3000 SERIES WOBBLEBOX OVERHAUL
1 48003256 1 KIT Incl 2 - 14

2 87487370 2 SHIM KIT 102 id x 125 square 4 hole
3 84185904 1 SHIM 60.3mm ID x 71.7mm OD x 0.5mm Thk
4 84265560 1 SHIM KIT
5 87568699 2 TAPERED BEARING 60mm ID x 95mm OD x 23mm W
6 84185837 1 NUT
7 87280575 1 BEARING ASSY 30mm ID x 62mm OD x 17.25mm W
8 87668909 1 TAPERED BEARING 40mm ID x 80mm OD x 19.75 Thk
9 300642 2 CIRCLIP M35 x 1.5mm W, Internal
11 87630859 1 GROOVED BUSHING 50mm ID x 60mm OD x 30mm L
13 87490544 1 SEAL 50mm ID x 62mm OD x 7mm Thk
14 87490543 1 SEAL 38.6mm ID x 62mm OD x 7mm Thk

GRAIN HEADER
88.058.23 p1 6/2021
KIT DIVIDER ASSY LH CIH

88.058.23 p1 6/2021
KIT DIVIDER ASSY LH CIH
1 48031336 1 KIT Incl 2 - 23

2 84137065 1 DIVIDER LH
3 84173224 1 DIVIDER LH RED
5 84147660 1 PLATE
6 7120024 3 BOLT
8 120104 4 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
10 86629542 3 LOCK NUT M8 x 1.25, Cl 8.8
13 84306514 1 LINKAGE
14 84306410 1 LINKAGE
20 210022 2 BUSHING
22 100016 3 NUT M10 x 1.5, Cl 8
23 43144 1 BOLT Hex, M10 x 70mm, Cl 8.8

GRAIN HEADER
88.058.24 p1 6/2021
KIT DIVIDER ASSY RH

88.058.24 p1 6/2021
KIT DIVIDER ASSY RH
1 48031342 1 KIT Incl 2 - 11

2 84137066 1 DIVIDER RH
3 84173226 1 DIVIDER RH
5 84147660 1 PLATE
6 7120024 3 BOLT
8 120104 3 BOLT Hex, M8 x 1.25 x 20mm, Cl 8.8
10 86629542 3 LOCK NUT M8 x 1.25, Cl 8.8
13 86512447 1 CARRIAGE BOLT Short Square Neck, M10 x 60mm, Class 8.8
14 84306495 1 LINKAGE
15 84306405 1 LINKAGE
20 210022 2 BUSHING
22 100016 3 NUT M10 x 1.5, Cl 8
23 43144 1 BOLT Hex, M10 x 70mm, Cl 8.8

GRAIN HEADER
88.058.25 p1 6/2021
KIT CROP DEFLECTOR

88.058.25 p1 6/2021
KIT CROP DEFLECTOR
1 399344A1 1 PACKAGE Incl Ref 2 and 3

2 399346A1 1 DIA KIT, HARVESTER

GRAIN HEADER
88.058.26 p1 6/2021
KIT, SUGER SWEEPER

88.058.26 p1 6/2021
KIT, SUGER SWEEPER
1 84151521 1 DIA KIT, HARVESTER Sweeper, Incl 2 - 6

3 43128 6 BOLT M8 x 1.25 x 30mm, Cl 8.8
5 9706690 6 NUT M8 x 1.25, Cl 8
6 84150687 2 SWEEP

GRAIN HEADER
88.058.27 p1 6/2021
KIT RIGID HHC AUGER DD 30-35 FT

88.058.27 p1 6/2021
KIT RIGID HHC AUGER DD 30-35 FT
1 47850159 1 KIT Incl 2 - 21

3 47463822 2 ARM Narrow
4 47463821 2 ARM Wide
5 84483639 2 WIRE HARNESS Height
6 84483640 2 WIRE HARNESS HT/Tilt
7 47466662 4 CLEVIS
8 47473855 4 CABLE
11 118490 12 NUT M12 x 1.75, Cl 8
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L
18 120100 6 BOLT M6 x 20mm, Cl 8.8
19 353308 6 NUT Hex, M6 x 1
21 47425969 2 PLUG

HEADER
88.058.27 01 p1 6/2021
KIT RIGID HHC KIT AUGER SD 30-35

88.058.27 01 p1 6/2021
KIT RIGID HHC KIT AUGER SD 30-35
1 47850158 1 KIT Incl 2 - 22

3 47463822 1 ARM Arm Assy Auger Narrow
4 47463821 3 ARM Arm Assy Auger Wide
5 84483639 2 WIRE HARNESS Height Ext
6 84483640 2 WIRE HARNESS HT/ Tilt EXT
7 47466662 4 CLEVIS
8 47473855 4 CABLE
11 118490 12 NUT M12 x 1.75, Cl 8
13 300389 4 BOLT M12 x 1.75 x 35mm, Cl 8.8
14 144607 4 SPACER 0.516" ID x 0.749" OD x 0.28" L
18 120100 8 BOLT M6 x 20mm, Cl 8.8
19 353308 8 NUT Hex, M6 x 1

GRAIN HEADER
88.058.28 p1 6/2021
KIT, LOW FLOOR ASSY 20 - 25 FT

88.058.28 p1 6/2021
1 48078076 1 KIT Low Floor Assy 20 - 25FT, Incl 2 - 7

2 48088837 1 INSTRUCTION Instruction Low Floor Assy
3 47579558 1 FLOOR LH End
4 47573489 11 FLOOR LH
5 47573497 1 FLOOR Center
6 47579585 1 FLOOR RH End
7 47573496 11 FLOOR RH

HEADER
88.058.29 p1 6/2021

88.058.29 p1 6/2021
1 47598267 1 KIT Low Floor Assy 30 - 35FT, Incl 2 - 8

2 48088837 1 INSTRUCTION Low Floor Assy
3 47579558 1 FLOOR LH End
4 47573489 16 FLOOR LH
5 47573497 1 FLOOR Center
6 47579585 1 FLOOR RH End
7 47573496 16 FLOOR RH
8 47579576 1 FLOOR RH Out Assy

HEADER
88.058.30 p1 6/2021
KIT, CUTTERBAR ANGLE REDUCTION 20FT 25FT

88.058.30 p1 6/2021
KIT, CUTTERBAR ANGLE REDUCTION 20FT 25FT
1 47888258 1 KIT Cutterbar Angle Reduction 20 - 25FT, Incl 2 - 10

2 47888860 1 INSTRUCTION Cutterbar Angle Reduction
3 47754218 1 PLATE Top LH
4 47755304 1 LINK
5 47754175 1 MOUNT LH
9 47754520 1 ARM RH
10 47754535 6 ARM

88.058.31 p1 6/2021
KIT, SUSPENSION DLX 35 SD RED

88.058.31 p1 6/2021
1 48178176 1 KIT Incl 2-4

3 48178164 1 KIT Linkage Assy 35FT
4 47395639 1 HOSE KIT

88.058.32 p1 6/2021

88.058.32 p1 6/2021
1 48178178 1 KIT Incl 2 - 4

3 48178166 1 KIT
4 47395639 1 HOSE KIT

88.058.33 p1 6/2021

88.058.33 p1 6/2021
1 48178180 1 KIT Incl 2 - 4

3 48178168 1 KIT
4 47395639 1 HOSE KIT

88.058.34 p1 6/2021

88.058.34 p1 6/2021
1 48178182 1 KIT Incl 2 - 4

3 48178170 1 KIT
4 47395683 1 HOSE KIT

88.058.35 p1 6/2021
KIT, SUSPENSION DLX 35 DD RED

88.058.35 p1 6/2021
1 48178186 1 KIT Incl 2 - 4

3 48178173 1 KIT
4 47395639 1 HOSE KIT

88.058.36 p1 6/2021

88.058.36 p1 6/2021
1 48178187 1 KIT Incl 2 - 4

3 48178174 1 KIT
4 47395639 1 HOSE KIT

88.058.37 p1 6/2021
KIT, KNIFE SPEED 500RPM

88.058.37 p1 6/2021
KIT, KNIFE SPEED 500RPM
1 51524107 1 KIT Kit Incl 2-4

2 51524139 1 INSTRUCTION Instructions
3 51524104 1 HALF-PULLEY Pulley
4 87041731 1 V-BELT 22.33 mm W x 2937.00 mm L

GRAIN HEADER
88.058.38 p1 6/2021
KIT, SKID/SHOE UPGRADE DUAL DRIVE

88.058.38 p1 6/2021
KIT, SKID/SHOE UPGRADE DUAL DRIVE
1 51568786 1 KIT Incl 2 - 9

2 51568827 1 INSTRUCTION Instructions
8 2975077 6 BOLT Hex, M10 x 1.5 x 25mm, Cl 8.8

HEADER
88.058.39 p1 6/2021
KIT, SKID/SHOE UPGRADE SINGLE DRIVE

88.058.39 p1 6/2021
KIT, SKID/SHOE UPGRADE SINGLE DRIVE
1 51568785 1 KIT Incl 2 - 7

2 51568827 1 INSTRUCTION Instruction
3 51417756 1 SKID/SHOE LH Side Shoe
6 2975077 3 BOLT Hex, M10 x 1.5 x 25mm, Cl 8.8

HEADER
88.058.40 AA p1 6/2021
KIT, SKID/SHOE POLY

88.058.40 AA p1 6/2021
KIT, SKID/SHOE POLY
1 51669620 56 SKID/SHOE Skidshoe 30FT

2 84346388 1 SKID/SHOE Slidshoe LH
3 84337990 1 SKID/SHOE Skidshoe RH
4 14441231 33 HEX SOC SCREW Flat Csk Hd, M6 x 12mm, Cl 10.9 Screw Flat
5 87613322 292 POP RIVET Pop, 6.35mm OD x 15.75mm L 30FT
6 84323064 1 SKID PLATE Skid Plate

SECTION INDEX
PLATFORM, CAB, BODYWORK AND DECALS
90.108.01 DECALS
90.108.02 DECALS - GENERAL INSTRUCTIONS
90.108.03 DECALS - CAUTION, WARNING, AND DANGER
90.108.04 DECALS TRI-STRIPE MY 21 AND AFTER
90.108.05 DECALS TERRA STRIPE

90.108.01 p1 6/2021
DECALS
90.108.01 p1 6/2021
DECALS
1 84361733 1 DECAL 3020 20

1 84361732 1 DECAL 3020 25
2 84361731 1 DECAL 3020 30
3 84361730 1 DECAL 3020 35
4 84361737 1 DECAL CASE IH Terra Flex, Right Hand
4 84361736 1 DECAL CASE IH Terra Flex, Left Hand
5 84361734 1 DECAL CASE IH Terra Flex

GRAIN HEADER
90.108.02 p1 6/2021
DECALS - GENERAL INSTRUCTIONS

90.108.02 p1 6/2021
DECALS - GENERAL INSTRUCTIONS
1 84334829 2 DECAL Grease, 50 Hours

2 84246563 1 DECAL Grease, 50 Hours
3 86547782 2 DECAL Tape, Yellow Reflective Yellow, Retroreflective Tape
3 86547781 4 REFLECTOR RED Red, Retroreflective Tape
3 86547783 4 REFLECTOR Tape, Red Orange Orange, Retroreflective Tape
4 87022092 3 DECAL Header Safety Walk
5 84371863 1 DECAL Operator Manual

GRAIN HEADER
90.108.03 p1 6/2021
DECALS - CAUTION, WARNING, AND DANGER

90.108.03 p1 6/2021
DECALS - CAUTION, WARNING, AND DANGER
1 86611824 2 DECAL Warning, Crush Hazard

2 86622719 2 DECAL Danger, Rest Header On The Ground
3 86626959 2 WARNING DECAL Shield Is Open Stand Clear
4 9826789 1 DANGER DECAL 180mm x 90mm H Rotating Drive Line
5 849471 1 DANGER DECAL Rotating Drive Line
6 849472 1 DANGER DECAL Shield Missing
7 87026533 2 DECAL Warning, No Step

GRAIN HEADER
90.108.04 p1 6/2021
DECALS TRI-STRIPE MY 21 AND AFTER

90.108.04 p1 6/2021
DECALS TRI-STRIPE MY 21 AND AFTER
1 51649430 1 DECAL Tri Strip 3020 35FT


GRAIN HEADER
90.108.05 p1 6/2021
DECALS TERRA STRIPE

90.108.05 p1 6/2021
DECALS TERRA STRIPE
1 51669741 1 DECAL LH End Shield Tri Stripe

2 51669744 1 DECAL RHEnd Shield Tri Stripe
3 51660777 1 DECAL LH CIH Terraflex Tri Stripe
4 51660778 1 DECAL RH CIH Terra Flex Tri Stripe
5 51660779 1 DECAL LH DD Terra flex Tri Stripe
6 51649444 1 DECAL Tri Stripe CIH Terra Flex

INDEX - INDICE - INDEX - ZAHLENVERZEICHNIS - INDICE - INDICE - INDHOLD - INHOUD
Number Figure Sequence Ref. Number Figure Sequence Ref.
100-3431 58.105.01 12 100037 58.500.08 12
100-3431 58.105.01 01 12 100037 58.500.09 10
100-3431 58.105.01 02 12 100037 58.500.10 12
100012 58.145.01 13 100037 58.500.11 10
100016 58.100.02 16 100037 88.058.12 01 6
100016 58.120.01 45 100037 88.058.12 01 10
100016 58.130.03 01 22 100037 88.058.12 01 10
100016 58.130.03 03 7 100037 88.058.12 01 10
100016 58.130.03 03 8 100037 88.058.12 02 14
100016 58.130.03 2 13 100037 88.058.12 02 14
100016 58.131.01 01 10 100037 88.058.12 02 14
100016 58.131.01 02 8 100037 88.058.12 02 14
100016 58.131.02 01 10 100037 88.058.12 03 15
100016 58.131.02 02 8 100037 88.058.12 03 16
100016 58.131.02 03 11 100037 88.058.12 04 12
100016 58.208.01 01 8 100037 88.058.12 04 12
100016 58.208.01 02 17 100037 88.058.13 01 10
100016 58.208.02 13 100037 88.058.13 01 10
100016 88.058.01 8 100037 88.058.13 01 10
100016 88.058.10 5 100037 88.058.13 01 6
100016 88.058.11 9 100037 88.058.13 02 14
100016 88.058.19 3 100037 88.058.13 02 14
100016 88.058.23 22 100037 88.058.13 02 14
100016 88.058.24 22 100037 88.058.13 02 14
100020 58.100.03 10 100037 88.058.13 03 15
100020 58.100.04 10 100037 88.058.13 03 16
100020 58.130.02 01 17 100037 88.058.13 04 12
100020 58.130.02 02 20 100037 88.058.13 04 12
100037 35.410.03 35 100037 88.058.16 7
100037 58.100.03 25 100037 88.058.17 8
100037 58.100.04 22 100038 35.410.03 37
100037 58.101.04 01 4 100038 58.100.01 01 13
100037 58.101.04 02 4 100038 58.100.01 02 6
100037 58.101.05 01 5 100038 58.100.02 20
100037 58.110.04 01 22 100038 58.101.04 01 11
100037 58.110.04 02 14 100038 58.101.04 02 11
100037 58.110.04 02 14 100038 58.101.05 01 31
100037 58.110.04 03 13 100038 58.130.01 01 13
100037 58.110.04 03 6 100038 88.058.05 04 11
100037 58.110.04 04 17 10118611 35.410.03 3
100037 58.110.04 05 24 10717511 35.410.03 13
100037 58.145.01 7 10733901 58.110.03 01
100037 58.500.04 10 10796401 58.208.01 02 14
100037 58.500.05 10 10796401 58.208.02 5
100037 58.500.06 10 10903721 58.130.01 02 15
100037 58.500.07 10 11061376 58.130.02 01 19
11061376 58.130.02 02 22 120100 58.120.01 26
118490 58.131.04 4 120100 58.120.01 01 4
118490 58.131.05 4 120100 58.120.01 02 4
118490 58.131.05 01 7 120100 88.058.05 01 18
118490 88.058.05 01 11 120100 88.058.05 02 18
118490 88.058.05 02 11 120100 88.058.05 03 18
118490 88.058.05 03 11 120100 88.058.05 04 18
118490 88.058.27 11 120100 88.058.16 22
118490 88.058.27 01 11 120100 88.058.17 22
120038 58.110.02 02 1 120100 88.058.27 18
120044 58.100.01 01 18 120100 88.058.27 01 18
120044 58.101.04 02 35 120101 58.110.03 01 8
120044 58.131.02 01 29 120101 58.110.03 02 7
120044 58.500.01 14 120101 58.110.03 03 7
120044 58.500.01 02 14 120103 35.410.05 35
120049 58.100.01 01 10 120103 58.131.02 03 7
120061 35.410.03 28 120103 58.208.01 01 5
120061 58.131.01 02 3 120103 58.208.01 02 7
120061 58.131.02 02 3 120103 58.208.02 7
120061 88.058.01 3 120104 58.101.04 01 10
120062 58.131.01 01 18 120104 58.101.04 02 10
120062 58.131.02 01 18 120104 58.101.05 01 11
120062 58.131.02 03 12 120104 58.110.01 12
120062 58.131.03 8 120104 58.110.05 03 25
120069 58.101.04 01 21 120104 58.130.01 01 18
120069 58.101.04 02 21 120104 58.131.01 01 20
120069 58.101.05 01 22 120104 58.131.01 02 15
120080 58.110.05 01 15 120104 58.131.02 01 20
120080 58.110.05 02 15 120104 58.131.02 02 15
120092 35.410.04 02 36 120104 58.208.01 02 11
120092 35.410.04 04 35 120104 58.208.02 16
120092 58.110.03 02 11 120104 58.500.01 26
120092 58.110.03 03 11 120104 58.500.01 02 21
120092 58.110.04 01 17 120104 88.058.01 15
120092 58.110.04 02 9 120104 88.058.02 14
120092 58.110.04 02 9 120104 88.058.23 8
120092 58.110.04 03 21 120104 88.058.24 8
120092 58.110.04 04 19 120107 58.131.01 01 23
120092 58.110.04 05 26 120107 58.131.02 01 23
120092 58.131.01 02 5 120113 58.101.05 02 4
120092 58.131.02 02 5 120116 58.100.02 15
120092 88.058.01 5 12164521 58.100.03 20
120093 58.100.03 8 12164521 58.100.04 4
120093 58.100.04 8 124365A1 58.130.01 01 21
120098 55.100.01 6 124366A1 58.130.01 01 12
120100 58.101.01 13 127031A1 55.404.01 9
129973A2 58.100.02 4 140045 58.208.01 02 16
130003 58.208.01 01 9 140045 58.208.02 12
130003 58.208.01 02 5 140045 88.058.01 7
130003 58.208.02 10 140045 88.058.10 4
130007 35.410.04 01 13 140045 88.058.11 7
130007 35.410.04 02 25 140045 88.058.19 10
130007 35.410.04 03 13 140045 88.058.19 6
130007 35.410.04 04 25 140045 88.058.23 21
130409A1 58.100.02 2 140045 88.058.24 21
1313104C1 58.130.01 01 14 140045 88.058.38 7
1316731C1 58.131.01 02 11 140045 88.058.39 5
1316731C1 58.131.02 02 11 140046 35.410.04 02 43
1326493C1 58.500.02 01 7 140046 35.410.04 04 41
1326493C1 58.500.03 25 140046 58.100.01 01 15
134454A1 55.404.01 1 140046 58.100.01 02 8
140016 58.130.01 01 27 140046 58.100.03 33
140017 58.145.01 9 140046 58.100.04 37
140020 35.410.01 19 140046 58.101.01 11
140042 88.058.19 4 140046 58.101.04 01 30
140045 35.410.04 02 42 140046 58.101.04 02 30
140045 35.410.04 04 40 140046 58.101.05 01 9
140045 58.100.02 17 140046 58.110.03 01 6
140045 58.101.04 01 8 140046 58.110.03 02 11
140045 58.101.04 02 8 140046 58.110.03 03 12
140045 58.101.05 01 23 140046 58.110.05 01 12
140045 58.105.01 25 140046 58.110.05 02 12
140045 58.105.01 26 140046 58.120.01 38
140045 58.105.01 01 26 140046 58.130.01 01 16
140045 58.105.01 02 26 140046 58.130.01 02 10
140045 58.110.04 01 13 140046 58.130.02 01 9
140045 58.110.04 02 22 140046 58.130.02 02 7
140045 58.110.04 02 22 140046 58.130.03 03 7
140045 58.110.04 03 14 140046 58.131.02 01 8
140045 58.110.04 04 14 140046 58.131.04 3
140045 58.110.04 05 21 140046 58.131.05 3
140045 58.120.01 37 140046 58.131.05 01 6
140045 58.130.03 01 21 140046 58.500.01 5
140045 58.130.03 03 6 140046 58.500.01 02 5
140045 58.130.03 03 7 140046 88.058.02 6
140045 58.130.03 2 10 140046 88.058.05 01 10
140045 58.131.01 01 9 140046 88.058.05 02 10
140045 58.131.01 02 7 140046 88.058.05 03 10
140045 58.131.02 01 9 140046 88.058.05 04 10
140045 58.131.02 02 7 140046 88.058.10 7
140045 58.131.02 03 10 140046 88.058.11 8
140045 58.208.01 01 7 140046 88.058.27 10
140046 88.058.27 01 10 170056 58.100.03 31
140048 35.410.05 23 170056 58.100.04 29
140048 58.100.01 01 37 170056 58.500.01 23
140048 58.100.01 02 19 188118A1 58.100.02 3
140048 58.100.03 9 210022 35.410.04 02 43
140048 58.100.04 9 210022 58.131.01 01 2
140048 58.110.03 02 12 210022 58.131.02 01 6
140048 58.110.03 03 12 210022 58.131.02 03 2
140048 58.130.02 01 16 210022 88.058.23 20
140048 58.130.02 02 19 210022 88.058.24 20
140048 58.131.01 01 3 225294C1 35.410.04 01 16
140048 58.131.01 02 4 225294C1 35.410.04 03 16
140048 58.131.02 01 3 225297C1 35.410.04 01 8
140048 58.131.02 02 4 225297C1 35.410.04 03 18
140048 58.131.02 03 15 225315C1 35.410.04 01 15
140048 58.131.03 5 225315C1 35.410.04 03 15
140048 88.058.01 4 225318C1 35.410.04 01 9
140229 35.410.03 12 225318C1 35.410.04 03 17
14441231 88.058.40 AA 4 251206A2 58.110.04 01 3
14442131 58.100.01 01 29 251206A2 58.110.04 05 3
144607 58.131.05 01 14 251206A2 58.208.04 01 2
144607 88.058.05 01 14 251206A2 58.208.04 02 2
144607 88.058.05 02 14 252687 58.131.02 03 27
144607 88.058.05 03 14 252687 88.058.23 19
144607 88.058.05 04 14 252687 88.058.24 19
144607 88.058.27 14 258978A1 58.100.02 26
144607 88.058.27 01 14 258980A1 58.100.02 27
14497531 35.410.04 02 41 278645 58.500.02 22
14497531 35.410.04 04 43 280251 58.100.02 7
145345 55.404.01 11 291525 58.500.01 30
150024 58.500.03 23 291944A1 58.100.02 31
150024 58.500.03 6 2975077 88.058.38 8
15840531 58.110.05 01 8 2975077 88.058.39 6
15840531 58.110.05 02 8 300388 58.120.01 31
161742 58.500.02 01 2 300388 88.058.10 9
161742 58.500.03 22 300388 88.058.11 6
161742 58.500.03 5 300389 58.100.01 02 7
167934 58.101.04 01 2 300389 58.131.05 01 13
167934 58.101.04 02 2 300389 88.058.05 01 13
167934 58.101.05 01 3 300389 88.058.05 02 13
167940 58.101.04 01 3 300389 88.058.05 03 13
167940 58.101.04 02 3 300389 88.058.05 04 13
167940 58.101.05 01 4 300389 88.058.27 13
167953 58.101.04 01 13 300389 88.058.27 01 13
167953 58.101.04 02 13 300595 58.110.03 12
167953 58.101.05 01 14 300595 58.110.03 18
300624 58.130.01 01 32 322358 58.105.01 23
300624 58.130.01 02 28 322358 58.105.01 01 23
300642 58.110.05 03 14 322358 58.105.01 02 23
300642 88.058.22 9 322358 58.110.01 13
300645 58.130.02 01 21 322358 58.110.01 10
300645 58.130.02 02 9 322358 58.110.01 13
300662 58.130.02 02 13 322358 58.110.03 01 12
308761 58.110.01 15 322358 58.110.04 01 19
308761 58.110.01 12 322358 58.120.01 39
308761 58.110.01 15 322358 58.130.04 06 7
321204 58.500.02 31 322358 58.131.01 01 19
321848A1 58.110.03 5 322358 58.131.01 02 2
321848A1 88.058.16 17 322358 58.131.02 01 19
322355 58.145.01 11 322358 58.131.02 02 2
322356 55.100.01 7 322358 58.131.02 03 6
322356 58.131.04 16 322358 58.131.04 8
322356 58.131.05 16 322358 58.131.05 8
322357 35.410.05 33 322358 58.208.01 01 4
322357 58.101.01 14 322358 58.208.01 02 6
322357 58.105.01 19 322358 58.208.02 6
322357 58.105.01 01 19 322358 58.500.01 27
322357 58.105.01 02 19 322358 58.500.01 02 20
322357 58.110.03 01 9 322358 88.058.01 2
322357 58.110.03 02 8 322358 88.058.02 13
322357 58.110.03 03 8 322358 88.058.20 4
322357 58.120.01 35 322358 88.058.23 7
322357 58.120.01 01 3 322358 88.058.24 7
322357 58.120.01 02 3 322358 88.058.26 2
322357 88.058.05 01 17 322359 58.130.01 02 17
322357 88.058.05 02 17 323238 58.100.03 22
322357 88.058.05 03 17 323238 58.100.04 38
322357 88.058.05 04 17 323866 35.410.04 02 35
322357 88.058.16 23 323866 35.410.04 04 34
322357 88.058.17 23 325829 35.410.03 34
322357 88.058.27 17 328754 58.100.02 19
322357 88.058.27 01 17 328754 58.110.04 01 18
322358 35.410.01 17 328754 58.110.04 02 10
322358 35.410.05 36 328754 58.110.04 02 10
322358 55.404.01 6 328754 58.110.04 03 25
322358 58.100.01 01 30 328754 58.110.04 04 23
322358 58.100.02 22 328754 58.130.02 02 14
322358 58.101.04 01 29 328754 58.131.02 01 33
322358 58.101.04 01.1 6 334534 58.100.01 02 1
322358 58.101.04 02 31 334682 58.131.02 01 32
322358 58.101.05 01 12 334967 58.100.03 13
322358 58.101.06 6 334967 58.100.04 14
335890 58.131.02 01 1 354360 58.131.01 01 4
337475 35.410.04 02 39 354360 58.131.02 01 4
337475 35.410.04 04 37 354360 58.131.02 03 16
337475 58.100.03 22 364818 58.100.01 01 23
337475 58.100.04 36 364818 58.100.01 02 11
337475 58.110.03 01 7 368317 58.100.03 18
337475 58.110.03 02 13 368317 58.100.04 32
337475 58.110.03 03 13 369441A1 58.131.03 2
337475 58.130.01 01 30 370002 35.410.03 20
337475 58.130.01 02 26 370003 35.410.04 02 16
337475 58.130.02 01 10 370003 35.410.04 04 16
337475 58.130.02 02 8 374887 88.058.02 8
337475 58.131.02 01 7 374891 58.120.01 27
337522 58.100.01 01 36 374892 88.058.16 5
337522 58.100.01 02 18 374892 88.058.17 6
337522 58.100.03 16 374892 88.058.19 11
337522 58.100.04 17 374895 58.100.03 35
337563 58.130.01 01 15 374895 58.100.04 35
338263 58.131.05 01 11 374895 58.101.01 10
338263 88.058.05 01 9 374895 58.120.01 30
338263 88.058.05 02 9 377580A1 58.110.06 09 7
338263 88.058.05 03 9 377580A1 58.110.06 10 6
338263 88.058.05 04 9 377580A1 58.208.03 1
338263 88.058.27 9 377580A1 58.208.04 01 3
338263 88.058.27 01 9 377580A1 58.208.04 02 3
338949 58.105.01 25 377581A1 58.110.06 09 6
338949 58.105.01 01 25 377581A1 58.110.06 10 6
338949 58.105.01 02 25 377581A1 58.110.06 11 3
338949 58.120.01 28 377581A1 58.208.03 1
338949 88.058.10 6 377581A1 58.208.04 01 11
338949 88.058.11 5 377581A1 58.208.04 02 11
353308 35.410.01 1 379650 58.500.02 01 17
353308 35.410.02 01 14 379650 58.500.02 01 26
353308 35.410.02 02 19 379650 58.500.03 24
353308 35.410.03 32 379650 58.500.12 10
353308 35.410.05 34 382974 35.410.04 02 44
353308 58.100.02 12 385686 35.410.01 11
353308 58.120.01 44 385686 35.410.04 03 8
353308 58.130.01 02 20 390636A1 55.404.01 10
353308 88.058.05 01 19 392530 58.110.03 02 13
353308 88.058.05 02 19 392530 58.110.03 03 13
353308 88.058.05 03 19 394629 58.130.03 01 19
353308 88.058.05 04 19 394631 58.130.02 01 15
353308 88.058.27 19 394631 58.130.02 02 18
353308 88.058.27 01 19 394632 58.130.01 02 16
354131 35.410.03 4 394818 58.130.01 01 24
395277 35.410.04 02 33 43127 58.105.01 21
395277 35.410.04 04 32 43127 58.105.01 01 21
395277 58.130.02 01 8 43127 58.105.01 02 21
395277 58.130.02 02 6 43127 58.110.01 12
395589 58.100.03 12A 43127 58.110.01 9
397985 58.100.02 10 43127 58.110.04 01 15
399344A1 88.058.25 1 43128 88.058.26 3
399346A1 88.058.25 2 43130 58.105.01 22
411728 58.500.12 9 43130 58.105.01 01 22
412126 58.100.03 29 43130 58.105.01 02 22
412126 58.100.04 28 43138 88.058.19 5
412189 58.131.01 01 8 43139 35.410.04 02 32
412189 58.131.02 03 24 43139 35.410.04 04 31
412189 88.058.23 18 43139 58.101.04 01 31
412250 58.100.01 01 31 43139 58.101.04 02 32
412255 58.145.01 12 43139 58.110.04 01 12
412364 35.410.02 01 17 43139 58.110.04 02 23
412364 35.410.02 02 22 43139 58.110.04 02 23
412559 58.100.02 14 43139 58.110.04 03 15
412672 58.131.02 01 31 43139 58.110.04 04 15
412672 88.058.02 9 43139 58.110.04 05 22
412672 88.058.11 4 43139 58.130.03 01 23
412686 35.410.04 02 26 43139 58.130.03 03 8
412686 35.410.04 04 26 43139 58.130.03 03 9
412687 35.410.04 01 14 43139 58.130.03 2 11
412687 35.410.04 02 27 43140 58.101.04 01 20
412687 35.410.04 03 14 43140 58.101.04 02 20
412687 35.410.04 04 27 43140 58.101.05 01 21
412687 58.130.01 01 17 43140 58.130.03 03 5
412687 58.130.01 02 11 43140 58.130.03 03 6
412690 58.500.02 01 4 43140 58.130.03 2 12
412690 58.500.03 27 43140 58.145.01 8
412690 58.500.03 9 43144 58.131.01 01 13
425-1010 58.130.01 01 22 43144 58.131.02 01 13
427411A1 58.101.04 02 27 43144 58.131.02 03 9
430356 35.410.02 01 11 43144 88.058.23 23
430356 35.410.02 02 2 43144 88.058.24 23
430356 58.100.02 24 43158 58.120.01 32
430357 35.410.02 01 6 43167 58.131.03 6
430357 35.410.02 02 3 43168 58.100.01 01 26
430357 35.410.03 14 43168 58.100.03 2
430357 35.410.05 19 43168 58.100.04 31
43118 35.410.01 2 43168 58.130.01 02 30
43118 35.410.05 32 43168 88.058.02 11
43127 35.410.01 18 431941 35.410.02 01 9
43127 58.100.02 21 431941 35.410.02 02 5
431941 35.410.03 15 439-5832 58.130.01 01 23
431941 35.410.05 20 440437 58.500.12 4
432-612 58.100.02 29 442340 35.410.03 17
43260 88.058.02 7 44284 58.105.01 32
433008 35.410.01 23 445394 55.100.01 3
433008 35.410.03 16 445394 58.105.01 14
433101 35.410.01 15 445394 58.105.01 01 14
43362 35.410.05 37 445394 58.105.01 02 14
43362 58.110.01 16 445394 58.130.03 01 11
43362 58.110.01 13 445394 58.130.04 02 7
43362 58.110.01 16 445394 58.130.04 05 7
43362 58.110.03 01 13 447305 58.100.03 23
43362 58.131.04 9 447305 58.100.04 20
43362 58.131.05 9 44912093 58.131.02 03 4
434097 35.410.05 21 450869 58.130.01 01 7
43440 58.105.01 17 453133C1 35.410.04 01 7
43440 58.105.01 01 17 453133C1 35.410.04 03 19
43440 58.105.01 02 17 456679 58.500.02 01 19
43473 58.110.04 02 15 456679 58.500.03 12
43473 58.110.04 02 15 456679 58.500.03 19
43473 58.110.04 03 4 456679 58.500.12 13
43473 58.500.04 11 46041 88.058.01 10
43473 58.500.05 11 47362902 58.110.05 06 25
43473 58.500.06 11 47367901 58.110.06 09 3
43473 58.500.07 11 47367901 58.110.06 10 3
43473 58.500.08 13 47367901 58.110.06 11 6
43473 58.500.09 11 47367901 58.208.03 3
43473 58.500.10 13 47367901 58.208.04 01 7
43473 58.500.11 11 47367901 58.208.04 02 7
43473 88.058.12 01 4 47373632 58.131.04 5
43473 88.058.12 01 11 47373632 58.131.05 5
43473 88.058.12 01 11 47374245 58.208.01 01 11
43473 88.058.12 01 11 47374245 58.208.02 19
43473 88.058.12 04 13 47374494 35.410.04 04 12
43473 88.058.12 04 13 47377058 58.130.02 02 1
43473 88.058.13 01 11 47380710 88.058.31 2
43473 88.058.13 01 11 47380710 88.058.32 2
43473 88.058.13 01 11 47380710 88.058.33 2
43473 88.058.13 01 4 47380710 88.058.34 2
43473 88.058.13 04 13 47380710 88.058.35 2
43473 88.058.13 04 13 47380710 88.058.36 2
43874 35.410.03 39 47384562 58.110.04 06 9
43874 35.410.05 24 47384562 58.130.02 01 11
43874 58.100.03 15 47384562 88.058.30 8
43874 58.100.04 16 47386609 88.035.01 2
439-1428 58.100.02 28 47386609 88.058.04 2
47388142 58.131.05 01 8 47463822 88.058.05 04 3
47390299 58.110.03 11 47463822 88.058.27 3
47390299 58.110.03 17 47463822 88.058.27 01 3
47390299 58.110.03 01 11 47466435 35.410.03 7
47390301 58.110.05 01 3 47466444 35.410.03 1
47390301 58.110.05 02 3 47466662 58.131.05 01 9
47395639 88.035.01 4 47466662 88.058.05 01 7
47395639 88.058.04 3 47466662 88.058.05 02 7
47395639 88.058.31 4 47466662 88.058.05 03 7
47395639 88.058.32 4 47466662 88.058.05 04 7
47395639 88.058.33 4 47466662 88.058.27 7
47395639 88.058.35 4 47466662 88.058.27 01 7
47395639 88.058.36 4 47473023 88.058.05 01 1
47395683 88.058.34 4 47473027 88.058.05 03 1
47419430 58.131.04 15 47473028 88.058.05 02 1
47419430 58.131.05 15 47473855 58.131.05 01 10
47425969 88.058.05 01 22 47473855 88.058.05 01 8
47425969 88.058.05 02 22 47473855 88.058.05 02 8
47425969 88.058.05 03 21 47473855 88.058.05 03 8
47425969 88.058.05 04 22 47473855 88.058.05 04 8
47425969 88.058.27 21 47473855 88.058.27 8
47425969 88.058.27 01 22 47473855 88.058.27 01 8
47428296 58.130.04 02 6 47499367 58.110.05 06 15
47428296 58.130.04 05 6 47547193 58.208.04 01 2
47428302 58.130.04 05 1 47547193 58.208.04 02 2
47428304 58.130.04 02 1 47573489 88.058.28 4
47430753 88.058.21 1 47573489 88.058.29 4
47430754 88.058.21 2 47573496 88.058.28 7
47431717 58.110.03 01 3 47573496 88.058.29 7
47435759 58.120.01 02 1 47573497 88.058.28 5
47435766 58.120.01 01 1 47573497 88.058.29 5
47437106 88.058.05 01 2 47579558 88.058.28 3
47437106 88.058.05 02 2 47579558 88.058.29 3
47437106 88.058.05 03 2 47579576 88.058.29 8
47449953 35.410.05 38 47579585 88.058.28 6
47461740 58.131.04 10 47579585 88.058.29 6
47461740 58.131.05 10 47598267 88.058.29 1
47463821 88.058.05 01 4 47601016 88.058.12 01 16
47463821 88.058.05 02 4 47601016 88.058.12 02 20
47463821 88.058.05 03 4 47601023 88.058.12 01 15
47463821 88.058.05 04 4 47601023 88.058.12 02 19
47463821 88.058.27 4 47601025 88.058.12 01 15
47463821 88.058.27 01 4 47601025 88.058.12 02 19
47463822 88.058.05 01 3 47601027 88.058.12 01 15
47463822 88.058.05 02 3 47601027 88.058.12 02 19
47463822 88.058.05 03 3 47601030 88.058.12 01 15
47601030 88.058.12 02 19 47762867 88.058.12 02 1
47630061 58.110.06 08 1 47762870 88.058.12 03 1
47710020 35.410.04 02 13 47762874 88.058.12 03 1
47710020 58.130.01 02 5a 47799035 35.410.03 3
47754174 58.110.04 06 7 47799036 35.410.03 40
47754175 58.110.04 06 6 47800625 88.058.16 1
47754175 88.058.30 5 47800626 88.058.17 1
47754218 58.110.04 06 3 47808889 35.410.03 2
47754218 88.058.30 3 47847930 88.058.20 1
47754520 58.110.04 06 10 47850157 88.058.05 04 1
47754520 58.130.02 01 1 47850158 88.058.27 01 1
47754520 88.058.30 9 47850159 88.058.27 1
47754535 58.110.04 06 11 47851105 58.131.04 1
47754535 88.058.30 10 47851105 58.131.05 1
47754732 58.110.04 06 4 47851105 58.131.05 01 4
47755304 58.110.04 06 5 47851873 88.058.05 04 2
47755304 88.058.30 4 47851873 88.058.27 2
47761081 88.058.13 01 1 47851873 88.058.27 01 2
47761082 58.500.11 1 47876649 58.131.05 01 1
47761082 88.058.13 01 1 47876652 58.131.05 01 2
47761085 58.500.07 1 47881142 58.110.05 06 1
47761085 88.058.13 01 1 47881263 58.500.02 01 1
47761119 58.500.09 1 47888258 88.058.30 1
47761119 88.058.13 01 1 47888259 58.110.04 06 1
47761128 88.058.13 04 1 47888860 58.110.04 06 2
47761129 88.058.13 04 1 47888860 88.058.30 2
47761130 88.058.13 02 1 47889192 58.110.05 06 3
47761133 88.058.13 02 1 47889247 58.110.05 06 34
47761134 88.058.13 02 1 47889254 58.110.05 06 12
47761135 88.058.13 02 1 47889583 58.110.05 06 36
47761136 88.058.13 03 1 47895196 58.110.03 02 6
47761137 88.058.13 03 1 47895196 58.110.03 03 14
47762795 88.058.12 01 1 47895201 58.110.03 02 5
47762798 58.500.06 1 47939173 58.110.05 06 24
47762798 88.058.12 01 1 47944805 58.500.02 01 25
47762799 58.500.04 1 47944805 58.500.12 1
47762799 88.058.12 01 1 47944807 58.500.02 01 23
47762849 58.500.05 1 47947983 58.500.02 01 9
47762849 88.058.12 01 1 47947984 58.500.02 01 11
47762851 58.500.10 1 47947985 58.500.02 01 12
47762851 88.058.12 04 1 47957517 58.110.05 06 17
47762852 58.500.08 1 47958444 58.130.01 01 33
47762852 88.058.12 04 1 47966404 58.120.01 03 3
47762854 88.058.12 02 1 47966407 58.120.01 03 2
47762856 88.058.12 02 1 47966916 58.500.12 2
47762859 88.058.12 02 1 47999155 58.110.05 06 16
47999172 58.110.05 06 35 51417756 88.058.38 3
47999172 58.500.12 6 51417756 88.058.39 3
48003256 88.058.22 1 51417758 88.058.38 4
48031336 88.058.23 1 51437407 88.058.38 6
48031342 88.058.24 1 51437408 88.058.38 5
48033413 58.110.06 09 1 51437408 88.058.39 4
48033414 58.110.06 10 1 51524104 88.058.37 3
48056252 58.120.01 03 1 51524107 88.058.37 1
48057166 58.120.01 10 51524139 88.058.37 2
48057474 58.120.01 11 51568785 88.058.39 1
48069254 58.110.03 10 51568786 88.058.38 1
48069254 58.110.03 16 51568827 88.058.38 2
48069254 58.110.03 01 10 51568827 88.058.39 2
48078076 88.058.28 1 51592968 58.101.02 01 2
48087503 58.500.12 7 51592969 58.101.02 01 1
48088837 88.058.28 2 51593592 35.410.03 1
48088837 88.058.29 2 51649430 90.108.04 1
48103679 35.410.03 6 51649436 90.108.04 2
48157251 58.101.02 01 3 51649437 90.108.04 3
48178164 88.058.31 3 51649442 90.108.04 4
48178166 88.058.32 3 51649444 90.108.05 6
48178168 88.058.33 3 51660777 90.108.05 3
48178170 88.058.34 3 51660778 90.108.05 4
48178173 88.058.35 3 51660779 90.108.05 5
48178174 88.058.36 3 51669620 58.110.06 11 2
48178176 88.058.31 1 51669620 88.058.40 AA 1
48178178 88.058.32 1 51669656 58.110.06 11 1
48178180 88.058.33 1 51669741 90.108.05 1
48178182 88.058.34 1 51669744 90.108.05 2
48178186 88.058.35 1 523282 58.101.03 5
48178187 88.058.36 1 556719 58.208.01 02 10
48185460 58.110.03 06 2 556719 58.208.02 15
48185462 58.110.03 07 2 575098R1 58.100.03 6
48185464 58.500.05 15 575098R1 58.100.04 5
48185466 58.500.04 15 577297 88.058.05 04 20
48185468 58.500.06 15 577927 88.058.05 01 20
48185477 58.500.10 19 577927 88.058.05 02 20
48185478 58.500.10 18 577927 88.058.27 01 20
48185479 58.110.03 07 1 623303 35.410.01 16
48185479 58.500.08 19 647695 58.131.04 21
48185480 58.110.03 06 1 647695 58.131.05 21
48185480 58.500.08 18 7120024 88.058.20 3
482769 58.110.04 01 8 7120024 88.058.23 6
496-21053 58.131.01 02 9 7120024 88.058.24 6
496-21053 58.131.02 02 9 728164 58.500.02 01 10
496-41066 58.130.01 01 19 728164 58.500.03 13
728164 58.500.03 18 84126918 35.410.04 04 6
740591 58.120.01 8 84126929 58.105.01 7
740591 58.120.01 01 5 84126929 58.105.01 01 7
740591 58.120.01 02 5 84126929 58.105.01 02 7
740591 88.058.16 20 84126939 58.110.04 05 7
740591 88.058.17 20 84126943 58.130.01 01 11
80710 58.101.04 01 9 84126951 58.130.03 03 1
80710 58.101.04 02 9 84126951 58.130.03 2 1
80710 58.101.05 01 10 84126953 58.130.03 03 2
80975 58.105.01 33 84126953 58.130.03 2 2
83904166 58.110.04 02 24 84126961 35.410.04 02 21
83904166 58.110.04 02 24 84126961 35.410.04 04 21
83904166 58.110.04 03 16 84127229 35.410.05 17
83904166 58.110.04 03 14 84127262 58.130.02 01 18
83904166 58.110.04 04 25 84127262 58.130.02 02 21
83904166 88.058.12 02 18 84129438 35.410.04 01 6
83904166 88.058.12 02 15 84129438 35.410.04 02 20
83904166 88.058.12 02 15 84129438 35.410.04 03 6
83904166 88.058.12 02 18 84129438 35.410.04 04 20
83904166 88.058.12 03 20 84129472 58.130.01 02 3
83904166 88.058.12 03 19 84129479 58.110.05 01 5
83904166 88.058.13 02 18 84129479 58.110.05 02 5
83904166 88.058.13 02 18 84134059 88.058.19 9
83904166 88.058.13 02 15 84134152 88.058.08 3
83904166 88.058.13 02 15 84134152 88.058.19 8
83904166 88.058.13 03 20 84134170 88.058.08 1
83904166 88.058.13 03 19 84134170 88.058.19 1
83904166 88.058.17 4 84134793 58.208.01 01 6
84007183 58.100.01 01 22 84134795 35.410.03 21
84023914 35.410.03 2 84135559 58.100.04 15
84023914 35.410.03 8 84137037 58.131.01 01 24
84026460 35.410.03 10 84137037 58.131.02 01 2
84037188 55.100.01 4 84137037 58.131.02 03 14
84057307 58.500.01 15 84137057 58.131.01 01 12
84057307 58.500.01 02 15 84137057 58.131.02 01 12
84062491 35.410.01 10 84137057 58.131.02 03 8
84062491 35.410.04 03 9 84137057 88.058.23 17
84072277 58.101.01 8 84137057 88.058.24 18
84078681 55.100.02 3 84137065 58.131.01 01 1
84101655 88.058.08 2 84137065 88.058.23 2
84123122 58.100.03 14 84137066 58.131.02 01 5
84124326 58.208.01 01 1 84137066 88.058.24 2
84124326 58.208.01 02 1 84138467 35.410.02 02 17
84124326 58.208.02 1 84139172 35.410.02 02 12
84125180 58.100.01 01 5 84139174 35.410.02 01 13
84126918 35.410.04 02 6 84139174 35.410.02 02 8
84139188 35.410.02 02 15 84150346 58.208.02 11
84139191 35.410.02 02 11 84150661 58.110.05 03 9
84139193 35.410.02 01 3 84150687 88.058.26 6
84139193 35.410.02 02 6 84151314 35.410.03 25
84139195 35.410.02 01 2 84151317 35.410.03 26
84139195 35.410.02 02 18 84151521 88.058.26 1
84139203 35.410.02 02 13 84155110 58.130.02 01 13
84139301 35.410.01 4 84155110 58.130.02 02 12
84139383 35.410.03 6 84156112 58.100.01 01 2
84139383 35.410.03 8 84160118 88.058.19 1
84139385 35.410.03 6 84164504 58.131.02 01 25
84139385 35.410.03 8 84164504 88.058.24 17
84139386 35.410.03 10 84167485 35.410.04 01 5
84139387 35.410.03 10 84167485 35.410.04 03 5
84139388 35.410.03 2 84170820 58.110.03 03 1
84140859 35.410.02 01 5 84170820 58.110.03 05 1
84140859 35.410.02 02 1 84170820 88.058.12 03 21
84141413 58.110.03 01 3 84170820 88.058.12 04 18
84141839 35.410.03 2 84170823 58.110.03 03 2
84143555 88.058.08 1 84170823 58.110.03 04 1
84143555 88.058.19 1 84170823 88.058.12 03 22
84143805 58.208.03 2 84170823 88.058.12 04 19
84146722 35.410.02 02 9 84172856 58.110.03 05 3
84146726 35.410.02 02 7 84172857 58.110.03 04 3
84146729 35.410.02 02 15 84173106 58.208.02 2
84146743 35.410.02 02 12 84173224 58.131.01 01 15
84146748 35.410.02 02 10 84173224 88.058.23 3
84146753 35.410.02 02 11 84173226 58.131.02 01 15
84146757 35.410.02 02 17 84173226 88.058.24 3
84146787 35.410.02 01 8 84173610 58.130.02 01 4
84146790 35.410.02 01 7 84173610 58.130.02 02 3
84146803 35.410.02 01 12 84173955 58.131.01 01 5
84146810 35.410.02 01 4 84173955 58.131.02 03 19
84147595 58.110.03 01 3 84173955 88.058.23 16
84147660 58.131.01 01 17 84174195 58.130.03 01 18
84147660 58.131.02 01 17 84175172 58.500.02 25
84147660 58.131.02 03 18 84175173 58.500.02 32
84147660 58.131.03 7 84175174 58.500.02 33
84147660 88.058.20 5 84175175 58.110.05 06 8
84147660 88.058.23 5 84175175 58.500.02 5
84147660 88.058.24 5 84175196 58.100.01 01 1
84150337 58.110.05 03 10 84176439 58.500.01 16
84150338 58.110.05 03 16 84176439 58.500.01 02 16
84150339 58.110.05 03 15 84176718 58.100.01 01 6
84150340 58.110.05 03 21 84177827 58.100.03 5
84150346 58.208.01 02 15 84177827 58.100.04 25
84180307 58.131.02 01 15 84212117 58.101.04 01 27
84180307 58.131.02 03 3 84212117 58.101.04 02 27
84181668 58.100.03 27 84212118 58.101.04 01 28
84181668 58.100.04 24 84212118 58.101.04 02 28
84184577 58.110.04 02 11 84212231 58.500.01 1
84184577 58.110.04 02 11 84212855 58.110.03 01 1
84184577 58.110.04 04 4 84212855 58.110.03 01 1
84184577 58.500.08 10 84213793 58.110.03 01 1
84184577 58.500.10 10 84213793 58.110.03 01 1
84184577 88.058.12 04 10 84213929 58.100.01 01 20
84184577 88.058.12 04 10 84215790 58.110.01 7
84184577 88.058.13 04 10 84215790 58.110.01 6
84184577 88.058.13 04 10 84215790 58.110.01 7
84185837 58.110.05 03 18 84216518 58.110.01 4
84185837 88.058.22 6 84216518 58.110.01 3
84185904 58.110.05 03 23 84216518 58.110.01 4
84185904 88.058.22 3 84216772 58.100.01 01 21
84185948 58.110.05 03 2 84221149 58.100.01 01 9
84191219 35.410.04 01 3 84221507 58.105.01 1
84191219 35.410.04 03 3 84221516 58.105.01 2
84191737 58.130.01 01 1 84223209 58.105.01 1
84192170 88.058.02 3 84223219 58.105.01 2
84194057 58.120.01 7 84224152 88.058.10 2
84194057 58.120.01 01 6 84224155 88.058.10 3
84194057 58.120.01 02 6 84224159 58.120.01 15
84194057 88.058.16 19 84224162 58.120.01 17
84194057 88.058.17 19 84225488 58.130.01 01 1
84195556 58.130.03 01 1 84225871 58.110.04 01 29
84195556 58.130.03 03 1 84225871 58.110.04 02 19
84195556 58.130.03 2 1 84225871 58.110.04 02 19
84195558 58.130.03 01 3 84225871 58.110.04 04 6
84195558 58.130.03 03 2 84225871 58.500.08 16
84195559 58.130.03 01 2 84225871 58.500.10 9
84195560 58.130.03 01 4 84225871 88.058.12 04 9
84195560 58.130.03 03 4 84225871 88.058.12 04 16
84206574 35.410.01 14 84225871 88.058.13 04 9
84206679 58.131.01 01 7 84225871 88.058.13 04 16
84206679 58.131.02 03 22 84225871 88.058.17 3
84206679 88.058.23 15 84228553 58.105.01 10
84206679 88.058.24 16 84228553 58.105.01 01 10
84207826 58.208.01 02 9 84228553 58.105.01 02 10
84207826 58.208.02 14 84228558 58.105.01 01 1
84209468 58.120.02 1 84228558 58.105.01 02 1
84210572 35.410.05 2 84228560 58.105.01 01 2
84210573 35.410.05 3 84229060 58.130.01 01 8
84211046 58.130.03 03 2 84229082 58.131.03 4
84229083 58.131.03 1 84245171 88.058.13 02 12
84229093 58.131.03 3 84245171 88.058.13 02 12
84230426 58.105.01 5 84245171 88.058.13 02 12
84230426 58.105.01 01 5 84245171 88.058.13 02 12
84230426 58.105.01 02 5 84245171 88.058.16 4
84232893 58.101.02 02 2 84246563 90.108.02 2
84234631 58.101.01 4 84246657 58.500.01 2
84235768 35.410.04 01 1 84246657 58.500.01 02 2
84235768 35.410.04 02 4 84246661 58.500.01 2
84235768 35.410.04 03 1 84247642 35.410.04 02 18
84235768 35.410.04 04 4 84247642 35.410.04 04 18
84235792 58.130.02 01 7 84248754 35.410.04 02 3
84235792 58.130.02 02 5 84248754 35.410.04 04 3
84235826 35.410.04 01 10 84251484 35.410.04 02 15
84235826 35.410.04 03 10 84251484 35.410.04 04 15
84240146 58.500.01 4 84251628 58.100.01 01 25
84240146 58.500.01 02 4 84252590 35.410.04 02 23
84242351 58.101.01 9 84252590 35.410.04 04 23
84242532 58.101.01 6 84254734 58.131.01 02 14
84242566 58.101.01 7 84254734 88.058.01 14
84244432 58.500.01 2 84256945 58.110.01 2
84244432 58.500.01 02 2 84256945 58.110.01 1
84244830 58.120.01 1 84256945 58.110.01 2
84244833 58.120.01 1 84256946 58.110.01 3
84244836 58.120.01 1 84256946 58.110.01 2
84245171 58.110.04 01 2 84256946 58.110.01 3
84245171 58.110.04 03 11 84256951 58.131.02 02 14
84245171 58.110.04 03 12 84256951 88.058.01 14
84245171 58.500.04 2 84260527 58.110.05 06 2
84245171 58.500.05 2 84260531 58.110.05 06 22
84245171 58.500.06 2 84261948 58.120.01 2
84245171 58.500.07 2 84261950 58.120.01 19
84245171 58.500.09 2 84261957 58.100.01 02 4
84245171 58.500.11 2 84262759 58.120.01 25
84245171 88.058.12 01 12 84263584 35.410.05 18
84245171 88.058.12 01 2 84263896 58.120.01 18
84245171 88.058.12 01 2 84263900 58.120.01 16
84245171 88.058.12 01 2 84264006 35.410.04 02 24
84245171 88.058.12 02 12 84264006 35.410.04 04 24
84245171 88.058.12 02 12 84264237 58.120.01 19
84245171 88.058.12 02 12 84264839 58.120.01 19
84245171 88.058.12 02 12 84265560 88.058.22 4
84245171 88.058.13 01 2 84265932 88.058.10 1
84245171 88.058.13 01 2 84267176 58.500.01 24
84245171 88.058.13 01 2 84267176 58.500.01 02 25
84245171 88.058.13 01 12 84267176 58.500.02 1
84267177 58.500.01 7 84275285 58.110.03 16
84267177 58.500.01 02 7 84275285 58.110.03 01 10
84267850 58.145.01 2 84275917 58.110.03 11
84268280 58.145.01 1 84275917 58.110.03 17
84268307 58.120.01 24 84275917 58.110.03 01 11
84268316 58.120.02 2 84282283 58.131.02 03 1
84270257 58.500.01 13 84283454 35.410.04 02 19
84270257 58.500.01 02 13 84283454 35.410.04 04 19
84270258 58.500.01 12 84284219 58.110.04 05 6
84270258 58.500.01 02 12 84284704 58.110.04 05 10
84270259 58.500.01 11 84284706 58.110.04 05 13
84270259 58.500.01 02 11 84285083 58.130.02 02 10
84270261 58.500.01 10 84285503 58.110.05 02 6
84270261 58.500.01 02 10 84285503 58.130.02 02 11
84270262 58.500.01 9 84286205 58.110.04 05 5
84270262 58.500.01 02 9 84287020 58.110.04 05 9
84270263 58.500.01 8 84287022 58.110.04 05 11
84270263 58.500.01 02 8 84287719 58.110.04 05 12
84270308 58.500.02 19 84287822 58.500.02 01 27
84270311 58.110.05 06 33 84292854 58.130.03 01 3
84270311 58.500.02 17 84292854 58.130.03 03 2
84270312 58.110.05 06 32 84294102 58.130.03 01 3
84270312 58.500.02 16 84294102 58.130.03 03 2
84270313 58.110.05 06 31 84294460 58.500.01 2
84270313 58.500.02 15 84295066 58.130.01 02 29
84270314 58.110.05 06 30 84296541 58.131.02 01 11
84270314 58.500.02 14 84296770 58.105.01 8
84270315 58.110.05 06 29 84296770 58.105.01 01 8
84270315 58.500.02 13 84296770 58.105.01 02 8
84270316 58.110.05 06 28 84296810 58.105.01 3
84270316 58.500.02 12 84296810 58.105.01 01 3
84270317 58.110.05 06 27 84296810 58.105.01 02 3
84270317 58.500.02 11 84296813 58.105.01 4
84270318 58.500.02 10 84296813 58.105.01 01 4
84270319 58.500.02 18 84296813 58.105.01 02 4
84270320 58.500.02 27 84297332 58.101.05 8
84270321 58.110.05 06 11 84297333 58.101.05 8
84270321 58.500.02 9 84297334 58.101.05 8
84271337 58.110.03 01 2 84297394 58.101.05 1
84271829 58.208.01 01 2 84297394 58.101.06 1
84271829 58.208.01 02 2 84297397 58.101.05 1
84271863 35.410.04 04 13 84297398 58.101.05 1
84271863 58.130.01 01 10 84297497 58.101.05 2
84271863 58.130.01 02 8 84297498 58.101.06 2
84274636 58.110.03 01 1 84297499 58.101.06 2
84275285 58.110.03 10 84297503 58.101.05 2
84297507 58.101.05 2 84315756 58.120.01 01 2
84297508 58.101.04 01.1 2 84315756 58.120.01 02 2
84297509 58.101.04 01.1 2 84315756 88.058.16 24
84299985 58.110.01 1 84315756 88.058.17 24
84299985 58.110.01 1 84318440 58.120.01 1
84300880 58.110.01 1 84322612 35.410.04 02 7
84300880 58.110.01 4 84322612 35.410.04 04 7
84302096 58.131.02 03 5 84322796 58.110.01 9
84302548 58.110.02 01 1 84322796 58.110.01 16
84302548 88.058.07 1 84322796 58.110.01 9
84302549 58.110.02 01 1 84323064 88.058.40 AA 6
84302549 88.058.07 1 84323744 35.410.04 02 2
84302550 58.110.02 01 1 84323744 35.410.04 04 2
84302551 88.058.03 1 84323936 58.110.02 01 2
84304905 58.110.01 5 84323936 58.110.02 02 2
84304905 58.110.01 5 84323936 88.058.03 3
84304908 58.110.01 6 84323936 88.058.07 3
84304908 58.110.01 6 84323937 58.110.02 01 3
84304910 58.110.01 6 84323937 58.110.02 02 3
84304910 58.110.01 6 84323937 88.058.07 4
84305206 55.100.01 1 84323938 58.110.02 01 3
84305206 55.100.02 1 84323938 58.110.02 02 3
84306322 58.130.01 01 1 84323938 88.058.07 4
84306385 58.131.01 02 12 84323939 58.110.02 01 3
84306385 58.131.02 02 12 84324323 58.130.03 01 6
84306405 58.131.02 01 26 84324323 58.130.04 04 2
84306405 58.131.02 03 20 84324323 58.130.04 05 2
84306405 88.058.24 15 84324324 58.130.03 01 16
84306410 58.131.01 01 6 84324324 58.130.04 01 2
84306410 88.058.23 14 84324324 58.130.04 02 2
84306495 58.131.02 01 24 84324326 58.130.03 01 14
84306495 58.131.02 03 21 84324326 58.130.04 03 2
84306495 88.058.24 14 84325291 58.130.02 01 12
84306514 58.131.01 01 11 84327589 35.410.05 7
84306514 88.058.23 13 84327597 35.410.05 9
84308107 58.131.01 02 1 84327599 35.410.05 8
84308107 58.131.02 02 1 84328549 35.410.05 4
84308107 88.058.01 11 84330928 58.130.03 01 13
84308394 58.100.01 01 28 84330929 58.130.03 01 17
84308791 88.058.01 1 84330930 58.130.03 01 12
84310378 58.105.01 2 84330932 58.130.03 01 15
84310399 58.105.01 1 84330933 58.130.03 01 5
84313189 58.500.01 29 84332238 58.130.03 01 10
84313189 58.500.01 02 18 84333216 58.131.04 14
84315621 58.130.01 02 29 84333216 58.131.05 14
84315756 58.120.01 41 84334829 90.108.02 1
84335949 35.410.04 02 8 84353044 58.130.03 01 3
84335949 35.410.04 04 8 84353044 58.130.03 03 3
84335952 35.410.04 02 9 84354956 58.130.02 01 1
84335954 35.410.04 02 10 84356842 88.058.21 3
84335954 35.410.04 04 10 84359384 58.130.03 03 2
84335954 35.410.04 04 9 84359388 58.130.03 03 3
84335956 35.410.04 02 11 84359494 58.130.03 01 3
84335956 35.410.04 04 11 84359494 58.130.03 03 2
84336890 58.105.01 30 84359495 58.130.03 01 4
84336890 58.105.01 02 30 84359495 58.130.03 03 3
84337069 58.110.04 01 6 84359864 58.110.01 6
84337069 58.110.04 03 26 84359864 58.110.01 5
84337069 58.208.03 3 84361201 58.110.04 05 18
84337496 58.110.04 01 11 84361604 58.131.04 11
84337989 58.110.06 09 5 84361606 58.131.04 6
84337989 58.110.06 10 5 84361606 58.131.05 6
84337989 58.110.06 11 4 84361730 90.108.01 3
84337989 58.208.04 01 7 84361731 90.108.01 2
84337989 58.208.04 02 7 84361732 90.108.01 1
84337990 58.110.04 01 6 84361733 90.108.01 1
84337990 58.110.04 03 27 84361734 90.108.01 5
84337990 58.110.06 09 4 84361736 90.108.01 4
84337990 58.110.06 10 4 84361737 90.108.01 4
84337990 58.110.06 11 5 84362468 58.120.01 6
84337990 58.208.03 3 84362468 58.120.01 01 8
84337990 88.058.40 AA 3 84369441 58.110.04 02 6
84338989 58.131.04 18 84369441 58.110.04 02 6
84338989 58.131.05 18 84371863 90.108.02 5
84343215 58.100.03 36 84375835 58.130.01 01 6
84343827 35.410.04 02 5 84378925 58.100.04 34
84343827 35.410.04 04 5 84388527 58.100.01 02 2
84345689 35.410.05 5 84389260 58.101.02 02 1
84346388 88.058.40 AA 2 84389900 35.410.04 02 22
84346731 58.100.02 30 84389900 35.410.04 04 22
84348475 58.101.01 1 84390188 35.410.04 01 2
84348476 58.101.01 2 84390188 35.410.04 03 2
84349076 58.130.01 01 31 84392914 58.110.03 01 1
84349076 58.130.01 02 27 84395855 58.110.04 04 11
84349077 58.130.01 01 9 84395855 58.110.04 05 16
84349077 58.130.01 02 7 84395855 88.058.12 03 12
84350047 58.130.04 06 1 84395855 88.058.13 03 12
84350047 88.058.18 1 84395857 58.110.04 01 8
84351894 35.410.04 04 1 84395857 58.110.04 03 4
84353032 58.130.03 03 3 84395857 58.110.04 04 4
84353032 58.130.03 2 3 84395857 58.110.04 05 8
84353041 58.130.03 2 4 84395857 88.058.12 02 5
84395857 88.058.12 02 5 84396061 58.110.04 04 1
84395857 88.058.12 02 5 84396061 58.110.04 05 14
84395857 88.058.12 02 5 84396061 58.500.08 7
84395857 88.058.12 03 5 84396061 58.500.10 7
84395857 88.058.12 03 5 84396061 88.058.12 02 11
84395857 88.058.13 02 5 84396061 88.058.12 02 11
84395857 88.058.13 02 5 84396061 88.058.12 02 11
84395857 88.058.13 02 5 84396061 88.058.12 02 11
84395857 88.058.13 02 5 84396061 88.058.12 03 11
84395857 88.058.13 03 5 84396061 88.058.12 03 11
84395857 88.058.13 03 5 84396061 88.058.12 04 7
84396057 58.110.04 01 9 84396061 88.058.12 04 7
84396057 58.110.04 03 6 84396061 88.058.13 02 11
84396057 58.110.04 04 6 84396061 88.058.13 02 11
84396057 88.058.12 02 7 84396061 88.058.13 02 11
84396057 88.058.12 02 7 84396061 88.058.13 02 11
84396057 88.058.12 02 7 84396061 88.058.13 03 11
84396057 88.058.12 02 7 84396061 88.058.13 03 11
84396057 88.058.12 03 7 84396061 88.058.13 04 7
84396057 88.058.12 03 7 84396061 88.058.13 04 7
84396057 88.058.13 02 7 84396244 58.131.01 01 7
84396057 88.058.13 02 7 84396244 58.131.02 01 27
84396057 88.058.13 02 7 84396244 88.058.01 16
84396057 88.058.13 02 7 84396838 58.131.02 01 30
84396057 88.058.13 03 7 84398437 35.410.04 02 17
84396057 88.058.13 03 7 84398437 35.410.04 04 17
84396059 58.110.04 01 10 84400456 58.500.01 02 24
84396059 58.110.04 03 9 84400456 58.500.03 1
84396059 58.110.04 04 9 84401760 58.130.04 03 1
84396059 88.058.12 02 10 84401763 58.130.04 04 1
84396059 88.058.12 02 10 84401764 58.130.04 01 1
84396059 88.058.12 02 10 84408927 88.058.01 12
84396059 88.058.12 02 10 84409304 58.110.04 01 4
84396059 88.058.12 03 10 84409304 58.110.04 03 2
84396059 88.058.12 03 10 84409304 58.110.04 04 2
84396059 88.058.13 02 10 84409304 88.058.12 02 3
84396059 88.058.13 02 10 84409304 88.058.12 02 3
84396059 88.058.13 02 10 84409304 88.058.12 02 3
84396059 88.058.13 02 10 84409304 88.058.12 02 3
84396059 88.058.13 03 10 84409304 88.058.12 03 3
84396059 88.058.13 03 10 84409304 88.058.12 03 3
84396061 58.110.04 01 30 84409304 88.058.13 02 3
84396061 58.110.04 02 6 84409304 88.058.13 02 3
84396061 58.110.04 02 6 84409304 88.058.13 02 3
84396061 58.110.04 03 10 84409304 88.058.13 02 3
84396061 58.110.04 04 10 84409304 88.058.13 03 3
84409304 88.058.13 03 3 84409313 58.110.04 03 8
84409307 58.110.04 01 4 84409313 58.110.04 04 8
84409307 58.110.04 03 3 84409313 88.058.12 02 9
84409307 58.110.04 04 3 84409313 88.058.12 02 9
84409307 88.058.12 02 4 84409313 88.058.12 02 9
84409307 88.058.12 02 4 84409313 88.058.12 02 9
84409307 88.058.12 02 4 84409313 88.058.12 03 9
84409307 88.058.12 02 4 84409313 88.058.12 03 9
84409307 88.058.12 03 4 84409313 88.058.13 02 9
84409307 88.058.12 03 4 84409313 88.058.13 02 9
84409307 88.058.13 02 4 84409313 88.058.13 02 9
84409307 88.058.13 02 4 84409313 88.058.13 02 9
84409307 88.058.13 02 4 84409313 88.058.13 03 9
84409307 88.058.13 02 4 84409313 88.058.13 03 9
84409307 88.058.13 03 4 84409315 58.110.04 01 4
84409307 88.058.13 03 4 84409315 58.110.04 03 1
84409309 58.110.04 03 7 84409315 58.110.04 04 1
84409309 58.110.04 04 7 84409315 88.058.12 02 2
84409309 88.058.12 02 8 84409315 88.058.12 02 2
84409309 88.058.12 02 8 84409315 88.058.12 02 2
84409309 88.058.12 02 8 84409315 88.058.12 02 2
84409309 88.058.12 02 8 84409315 88.058.12 03 2
84409309 88.058.12 03 8 84409315 88.058.12 03 2
84409309 88.058.12 03 8 84409315 88.058.13 02 2
84409309 88.058.13 02 8 84409315 88.058.13 02 2
84409309 88.058.13 02 8 84409315 88.058.13 02 2
84409309 88.058.13 02 8 84409315 88.058.13 02 2
84409309 88.058.13 02 8 84409315 88.058.13 03 2
84409309 88.058.13 03 8 84409315 88.058.13 03 2
84409309 88.058.13 03 8 84410250 35.410.05 10
84409311 58.110.04 01 5 84411471 35.410.05 11
84409311 58.110.04 03 5 84411473 35.410.05 12
84409311 58.110.04 04 5 84411475 35.410.05 13
84409311 88.058.12 02 6 84411477 35.410.05 14
84409311 88.058.12 02 6 84411479 35.410.05 15
84409311 88.058.12 02 6 84411555 35.410.06 1
84409311 88.058.12 02 6 84412204 35.410.05 16
84409311 88.058.12 03 6 84412621 35.410.05 2
84409311 88.058.12 03 6 84412622 35.410.05 3
84409311 88.058.13 02 6 84413069 58.130.01 01 6
84409311 88.058.13 02 6 84415610 35.410.06 7
84409311 88.058.13 02 6 84415615 35.410.06 5
84409311 88.058.13 02 6 84416250 35.410.04 04 11
84409311 88.058.13 03 6 84416252 35.410.04 04 9
84409311 88.058.13 03 6 84416268 35.410.04 02 11
84409313 58.110.04 01 5 84416270 88.058.04 4
84416272 88.058.04 1 84422992 88.058.12 04 17
84419450 35.410.06 9 84422992 88.058.13 01 8
84419744 58.131.05 11 84422992 88.058.13 01 8
84422134 58.110.04 01 5 84422992 88.058.13 01 8
84422134 58.110.04 02 2 84422992 88.058.13 01 13
84422134 58.110.04 02 2 84422992 88.058.13 04 17
84422134 58.110.04 03 3 84422992 88.058.13 04 17
84422134 58.110.04 04 3 84423629 88.058.02 4
84422134 58.500.04 4 84424278 35.410.05 6
84422134 58.500.05 4 84427633 35.410.04 02 12
84422134 58.500.06 4 84429100 58.110.03 7
84422134 58.500.07 4 84429100 58.110.03 8
84422134 58.500.08 3 84429100 58.110.03 01 7
84422134 58.500.09 4 84429100 58.110.03 04 5
84422134 58.500.10 3 84429100 58.110.03 05 6
84422134 58.500.11 4 84429100 88.058.17 16
84422134 88.058.12 01 3 84429101 58.110.03 5
84422134 88.058.12 01 4 84429101 58.110.03 6
84422134 88.058.12 01 4 84429101 58.110.03 01 4
84422134 88.058.12 01 4 84429101 58.110.03 04 4
84422134 88.058.12 04 3 84429101 58.110.03 05 4
84422134 88.058.12 04 3 84429101 88.058.16 13
84422134 88.058.13 01 4 84429101 88.058.17 17
84422134 88.058.13 01 4 84429102 58.110.03 6
84422134 88.058.13 01 4 84429102 58.110.03 7
84422134 88.058.13 01 3 84429102 58.110.03 01 5
84422134 88.058.13 04 3 84429102 58.110.03 02 7
84422134 88.058.13 04 3 84429102 58.110.03 03 15
84422689 58.100.01 01 11 84429102 58.110.03 04 7
84422992 58.110.04 01 31 84429102 58.110.03 05 5
84422992 58.110.04 02 20 84429102 58.110.06 08 2
84422992 58.110.04 02 20 84429102 88.058.16 14
84422992 58.110.04 03 13 84429102 88.058.17 14
84422992 58.500.04 8 84431473 35.410.01 6
84422992 58.500.05 8 84431473 35.410.02 02 20
84422992 58.500.06 8 84431546 35.410.01 8
84422992 58.500.07 8 84431546 35.410.02 01 16
84422992 58.500.08 17 84431546 35.410.02 02 23
84422992 58.500.09 8 84431546 35.410.05 27
84422992 58.500.10 17 84434997 35.410.01 24
84422992 58.500.11 8 84435044 35.410.01 25
84422992 88.058.12 01 13 84435046 35.410.01 28
84422992 88.058.12 01 8 84435047 35.410.01 29
84422992 88.058.12 01 8 84441549 88.058.19 7
84422992 88.058.12 01 8 84444119 58.500.02 01 24
84422992 88.058.12 04 17 84444119 58.500.03 3
84444120 58.500.03 11 84483639 88.058.27 01 5
84444121 58.500.02 01 20 84483640 88.058.05 01 6
84444121 58.500.03 16 84483640 88.058.05 02 6
84444122 58.500.03 4 84483640 88.058.05 03 6
84444123 58.500.02 01 8 84483640 88.058.05 04 6
84444123 58.500.03 21 84483640 88.058.27 6
84444124 58.500.03 15 84483640 88.058.27 01 6
84444125 58.500.02 01 13 84484156 58.110.05 01 4
84444125 58.500.03 28 84484156 58.110.05 02 4
84444126 58.500.02 01 18 84484788 58.110.05 02 4
84444126 58.500.03 17 84485266 58.100.04 33
84466555 58.105.01 02 2 84485626 58.110.04 01 6
84467282 58.110.03 01 2 84485626 58.208.03 3
84467282 58.110.03 02 6 84485626 58.208.04 01 6
84467282 88.058.16 9 84485626 58.208.04 02 6
84467292 58.110.03 01 2 84486510 58.110.03 02 1
84467292 58.110.03 02 5 84486512 58.110.03 02 2
84467292 88.058.16 10 84489286 58.110.05 01 1
84468473 58.101.04 01.1 1 84489286 58.110.05 02 1
84469382 58.101.04 01 23 84490487 58.110.05 02 6
84469382 58.101.05 01 24 84490689 58.110.04 01 11
84469382 58.101.05 02 2 84490689 58.208.04 01 6
84471715 35.410.03 9 84490689 58.208.04 02 6
84471716 35.410.03 5 84493625 58.110.03 02 1
84473233 58.101.04 02 33 84493630 58.110.03 02 2
84473233 58.101.07 2 84494081 58.130.03 01 10
84473235 58.101.04 02 7 84494553 58.130.03 01 5
84473235 58.101.07 1 84495967 88.035.01 3
84473623 55.100.03 1 84495968 88.035.01 3
84473623 88.058.02 16 84495970 88.035.01 1
84475407 58.500.01 02 26 84495972 88.035.01 1
84477282 58.100.03 34 84537480 88.058.05 01 5
84478408 88.058.02 2 84537480 88.058.05 04 5
84478409 88.058.02 12 84543491 58.110.03 11
84479134 88.058.02 18 84543491 58.110.03 18
84479406 58.130.01 01 1 84543491 58.110.03 20
84479419 58.130.01 01 1 84543491 58.110.03 01 9
84479456 58.110.05 01 6 84543491 88.058.16 18
84479456 58.110.05 02 6 84547319 58.100.01 01 8
84480170 88.058.02 15 84568002 58.130.01 01 8
84480201 88.058.02 1 84569270 58.110.04 06 8
84481701 88.058.02 19 84569270 58.130.02 01 2
84483537 58.130.03 01 17 84569270 58.130.02 02 2A
84483639 88.058.05 02 5 84569270 88.058.30 7
84483639 88.058.05 03 5 84577045 88.058.03 2
84483639 88.058.27 5 84577045 88.058.07 2
84585637 58.110.03 2 84585665 58.110.03 02 1
84585637 58.110.03 01 1 84585666 58.110.03 1
84585638 58.110.03 2 84585666 58.110.03 02 1
84585638 58.110.03 01 1 84585667 58.110.03 1
84585639 58.110.03 2 84585667 58.110.03 02 1
84585639 58.110.03 01 1 84585668 58.110.03 1
84585640 58.110.03 2 84585668 58.110.03 02 1
84585640 58.110.03 01 1 84585669 58.110.03 1
84585641 58.110.03 01 1 84585669 58.110.03 02 1
84585642 58.110.03 01 1 84585670 58.110.03 1
84585643 58.110.03 13 84585670 58.110.03 02 1
84585643 88.058.12 01 17 84585671 58.110.03 1
84585643 88.058.12 02 21 84585671 58.110.03 02 1
84585644 58.110.03 13 84585672 58.110.03 02 3
84585645 58.110.03 12 84585673 58.110.03 02 2
84585645 58.110.03 13 84585674 58.110.03 02 3
84585645 58.110.03 15 84585675 58.110.03 02 2
84585645 58.110.03 06 3 84585676 58.110.03 02 3
84585645 88.058.12 01 18 84585677 58.110.03 02 2
84585645 88.058.12 02 22 84585678 58.110.03 02 3
84585646 58.110.03 12 84585679 58.110.03 02 2
84585646 58.110.03 13 84585680 58.110.03 3
84585646 58.110.03 15 84585680 58.110.03 01 3
84585647 58.110.03 15 84585681 58.110.03 01 3
84585647 58.110.03 19 84590649 58.130.02 01 3
84585647 58.110.03 21 84599982 58.131.04 20
84585647 58.110.03 02 4 84599982 58.131.05 20
84585647 58.110.03 06 5 84599982 58.131.05 01 3
84585647 58.110.03 07 4 84814912 58.120.01 12
84585647 88.058.12 01 20 84814948 35.410.02 01 10
84585647 88.058.12 02 24 84814948 35.410.02 02 4
84585648 58.110.03 18 84814948 58.100.02 25
84585648 88.058.12 01 19 84818450 58.110.04 01 16
84585648 88.058.12 02 23 84818450 58.110.04 02 8
84585649 58.110.03 18 84818450 58.110.04 02 8
84585650 58.110.03 18 84818450 58.110.04 03 24
84585651 58.110.03 18 84818450 58.110.04 04 21
84585652 58.110.03 16 84818450 58.500.08 9
84585653 58.110.03 16 84818450 58.500.10 16
84585654 58.110.03 9 84818450 88.058.12 03 18
84585655 58.110.03 9 84818450 88.058.12 03 18
84585662 58.110.03 07 3 84818450 88.058.12 04 16
84585663 58.110.03 06 4 84818450 88.058.12 04 9
84585664 58.110.03 1 84818450 88.058.13 03 18
84585664 58.110.03 02 1 84818450 88.058.13 03 18
84585665 58.110.03 1 84818450 88.058.13 04 16
84818450 88.058.13 04 9 86507486 58.110.03 01 11
849471 58.500.02 29 86507486 58.130.03 01 7
849471 58.500.02 01 15 86507486 58.130.04 06 4
849471 58.500.12 12 86508567 58.131.04 17
849471 90.108.03 5 86508567 58.131.05 17
849472 58.500.02 34 86508568 58.105.01 18
849472 58.500.02 01 16 86508568 58.105.01 01 18
849472 90.108.03 6 86508568 58.105.01 02 18
84989392 35.410.05 28 86508581 58.500.01 21
86000439 58.145.01 10 86508583 58.100.01 01 27
86000441 35.410.03 33 86508731 58.131.01 02 10
86000441 35.410.04 02 40 86508731 58.131.02 02 10
86000441 35.410.04 04 38 86508813 55.100.01 8
86000441 58.100.01 01 32 86508947 58.130.01 01 28
86000441 58.100.01 02 13 86508947 58.130.01 02 24
86000441 58.110.05 01 11 86508947 58.130.04 06 3
86000441 58.110.05 02 11 86511324 35.410.03 38
86000441 58.130.02 01 6 86511324 35.410.04 02 29
86000441 58.130.02 02 4 86511324 35.410.04 04 45
86014250 58.120.01 33 86511324 58.110.05 01 16
86014250 58.120.01 42 86511324 58.110.05 02 16
86050346 88.058.05 01 16 86511324 58.130.01 01 25
86050346 88.058.05 02 16 86511324 58.130.01 02 22
86050346 88.058.05 03 16 86511324 58.500.01 25
86050346 88.058.05 04 16 86511324 58.500.01 02 22
86050346 88.058.27 16 86511326 35.410.04 01 12
86050346 88.058.27 01 16 86511326 35.410.04 02 1
86500688 58.105.01 20 86511326 35.410.04 03 12
86500688 58.105.01 01 20 86511326 35.410.04 04 46
86500688 58.105.01 02 20 86511327 35.410.04 02 37
86500689 35.410.04 02 38 86511327 35.410.04 04 44
86500689 35.410.04 04 36 86511832 58.208.01 01 13
86500689 58.105.01 27 86511832 58.208.02 21
86500689 58.105.01 01 27 86512138 35.410.01 21
86500689 58.105.01 02 27 86512419 35.410.02 01 15
86505259 58.110.03 01 5 86512419 35.410.02 02 21
86505259 58.110.03 02 11 86512425 58.110.04 01 23
86505259 58.110.03 03 11 86512425 58.110.04 03 19
86505259 58.110.04 01 17 86512425 58.110.04 04 16
86505259 58.110.04 02 9 86512425 58.110.04 05 23
86505259 58.110.04 02 9 86512425 88.058.12 02 17
86505259 58.110.04 03 21 86512425 88.058.12 02 18
86505259 58.110.04 05 26 86512425 88.058.12 02 18
86507486 58.110.01 8 86512425 88.058.12 02 17
86507486 58.110.01 15 86512425 88.058.12 03 14
86507486 58.110.01 8 86512425 88.058.12 03 15
86512425 88.058.13 02 17 86518387 58.101.04 02 26
86512425 88.058.13 02 17 86518387 58.101.05 01 27
86512425 88.058.13 02 18 86518392 58.101.04 01 15
86512425 88.058.13 02 18 86518392 58.101.04 02 15
86512425 88.058.13 03 14 86518392 58.101.05 01 16
86512425 88.058.13 03 15 86518393 58.101.04 01 16
86512426 58.110.04 01 27 86518393 58.101.04 02 16
86512426 58.110.04 03 12 86518393 58.101.05 01 17
86512426 58.500.04 14 86518431 58.101.04 01 1
86512426 58.500.05 14 86518431 58.101.04 02 1
86512426 58.500.06 14 86518431 58.101.05 01 2
86512426 58.500.07 14 86520062 58.500.02 01 22
86512426 58.500.09 14 86521552 55.404.01 5
86512426 58.500.11 14 86521605 55.404.01 7
86512426 88.058.12 01 14 86521733 58.110.05 01 9
86512426 88.058.12 01 14 86521733 58.110.05 02 9
86512426 88.058.12 01 14 86525265 58.500.02 01 21
86512426 88.058.12 01 14 86544168 58.105.01 15
86512426 88.058.12 02 13 86544168 58.105.01 01 15
86512426 88.058.12 02 13 86544168 58.105.01 02 15
86512426 88.058.12 02 13 86547781 90.108.02 3
86512426 88.058.12 02 13 86547782 90.108.02 3
86512426 88.058.13 01 14 86547783 90.108.02 3
86512426 88.058.13 01 14 86548493 58.105.01 9
86512426 88.058.13 01 14 86548493 58.105.01 01 9
86512426 88.058.13 01 14 86548493 58.105.01 02 9
86512426 88.058.13 02 13 86553411 58.500.01 17
86512426 88.058.13 02 13 86563537 58.110.03 14
86512426 88.058.13 02 13 86563537 58.110.03 15
86512426 88.058.13 02 13 86563537 58.110.03 17
86512426 88.058.16 3 86566989 35.410.03 11
86512428 58.101.04 01 6 86566989 35.410.04 01 17
86512428 58.101.04 02 6 86566989 35.410.04 03 20
86512428 58.101.05 01 7 86566989 55.100.01 9
86512430 58.100.01 01 34 86566989 58.105.01 13
86512430 58.100.01 02 16 86566989 58.105.01 01 13
86512446 58.120.01 29 86566989 58.105.01 02 13
86512446 58.130.03 01 20 86566989 88.058.05 01 21
86512447 58.131.02 01 28 86566989 88.058.05 02 21
86512447 88.058.24 13 86566989 88.058.05 03 20
86514396 58.101.03 2 86566989 88.058.05 04 21
86516740 58.145.01 4 86566989 88.058.27 20
86518386 58.101.04 01 14 86566989 88.058.27 01 21
86518386 58.101.04 02 14 86579672 35.410.06 2
86518386 58.101.05 01 15 86579673 35.410.01 9
86518387 58.101.04 01 26 86579673 35.410.04 03 7
86579687 35.410.06 3 86616380 88.058.02 17
86580177 35.410.03 24 86619060 58.120.01 27
86580177 35.410.05 25 86619060 58.130.04 01 3
86580178 35.410.03 22 86619060 58.130.04 02 3
86585706 58.500.03 14 86619060 58.130.04 03 3
86585706 58.500.03 20 86619060 58.130.04 04 3
86588003 58.100.03 7 86619060 58.130.04 05 3
86588003 58.100.04 6 86619802 58.110.04 01 25
86588450 35.410.03 31 86619802 58.110.04 02 17
86588450 58.100.02 13 86619802 58.110.04 02 17
86590413 55.100.01 5 86619802 58.110.04 03 18
86590413 58.105.01 29 86619802 58.110.04 03 11
86590413 58.105.01 01 29 86619802 58.110.04 04 13
86590413 58.105.01 02 29 86619802 58.110.04 05 20
86592699 58.110.01 14 86619802 58.500.04 13
86592699 58.110.01 11 86619802 58.500.05 13
86592699 58.110.01 14 86619802 58.500.06 13
86592701 58.100.01 01 33 86619802 58.500.07 13
86592701 58.100.01 02 15 86619802 58.500.08 15
86592713 58.130.01 01 29 86619802 58.500.09 13
86592713 58.130.01 02 25 86619802 58.500.10 15
86597706 58.500.02 01 14 86619802 58.500.11 13
86597706 58.500.12 11 86619802 88.058.12 01 11
86598098 35.410.03 40 86619802 88.058.12 01 13
86598100 35.410.06 10 86619802 88.058.12 01 13
86603051 35.410.01 3 86619802 88.058.12 01 13
86606228 55.100.01 2 86619802 88.058.12 02 16
86608281 58.101.05 6 86619802 88.058.12 02 17
86608282 58.101.05 3 86619802 88.058.12 02 17
86608283 58.101.05 5 86619802 88.058.12 02 16
86608284 58.101.05 4 86619802 88.058.12 03 13
86609389 58.101.04 01 5 86619802 88.058.12 03 14
86609389 58.101.04 02 5 86619802 88.058.12 04 15
86609389 58.101.05 01 6 86619802 88.058.12 04 15
86609553 58.101.04 01 28 86619802 88.058.13 01 13
86609553 58.101.04 02 28 86619802 88.058.13 01 13
86609553 58.101.05 01 29 86619802 88.058.13 01 13
86609726 58.101.04 01 17 86619802 88.058.13 01 11
86609726 58.101.04 02 17 86619802 88.058.13 02 16
86609726 58.101.05 01 18 86619802 88.058.13 02 16
86609773 58.101.04 01 25 86619802 88.058.13 02 17
86609773 58.101.05 01 26 86619802 88.058.13 02 17
86611824 90.108.03 1 86619802 88.058.13 03 13
86616339 58.105.01 6 86619802 88.058.13 03 14
86616339 58.105.01 01 6 86619802 88.058.13 04 15
86616339 58.105.01 02 6 86619802 88.058.13 04 15
86620026 58.120.01 4 86625266 58.110.05 02 7
86620027 58.500.01 3 86625266 58.130.01 02 12
86620027 58.500.01 02 3 86625266 58.130.02 01 5
86620720 58.120.01 3 86625266 58.130.02 02 2
86622548 58.500.01 19 86625266 88.058.05 04 12
86622719 90.108.03 2 86625852 58.500.02 26
86623901 35.410.01 26 86626144 58.101.04 02 19
86623902 35.410.01 27 86626959 90.108.03 3
86624182 58.120.01 36 86629539 58.105.01 28
86624184 58.130.03 01 8 86629539 58.105.01 01 28
86624184 58.130.04 01 4 86629539 58.105.01 02 28
86624184 58.130.04 02 4 86629542 35.410.03 29
86624184 58.130.04 03 4 86629542 58.130.03 01 9
86624184 58.130.04 04 4 86629542 58.130.04 01 5
86624184 58.130.04 05 4 86629542 58.130.04 02 5
86624184 88.058.26 4 86629542 58.130.04 03 5
86624981 35.410.03 36 86629542 58.130.04 04 5
86625254 58.500.01 18 86629542 58.130.04 05 5
86625255 58.100.01 01 17 86629542 58.131.01 01 22
86625255 58.110.03 01 4 86629542 58.131.02 01 22
86625255 58.110.03 02 10 86629542 58.131.02 03 13
86625255 58.110.03 03 10 86629542 88.058.23 10
86625255 58.110.04 01 26 86629542 88.058.24 10
86625255 58.110.04 02 18 86630786 58.110.04 01 9
86625255 58.110.04 02 21 86630786 58.110.04 02 4
86625255 58.110.04 02 18 86630786 58.110.04 02 4
86625255 58.110.04 02 21 86630786 58.110.04 03 8
86625255 58.110.04 03 20 86630786 58.110.04 04 7
86625255 58.110.04 03 22 86630786 58.500.04 6
86625255 58.110.04 04 18 86630786 58.500.05 6
86625255 58.110.04 05 25 86630786 58.500.06 6
86625255 58.131.04 12 86630786 58.500.07 6
86625255 58.131.05 12 86630786 58.500.08 5
86625255 88.058.12 03 16 86630786 58.500.09 6
86625255 88.058.13 03 16 86630786 58.500.10 5
86625256 58.130.02 02 15 86630786 58.500.11 6
86625256 58.131.05 01 12 86630786 88.058.12 01 8
86625256 88.058.05 01 12 86630786 88.058.12 01 6
86625256 88.058.05 02 12 86630786 88.058.12 01 6
86625256 88.058.05 03 12 86630786 88.058.12 01 6
86625256 88.058.27 12 86630786 88.058.12 04 5
86625256 88.058.27 01 12 86630786 88.058.12 04 5
86625266 58.100.01 02 9 86630786 88.058.13 01 6
86625266 58.100.03 4 86630786 88.058.13 01 6
86625266 58.100.04 19 86630786 88.058.13 01 6
86625266 58.110.05 01 7 86630786 88.058.13 01 8
86630786 88.058.13 04 5 86639325 58.130.03 03 5
86630786 88.058.13 04 5 86639325 58.130.03 2 14
86630787 58.110.04 01 10 86639326 58.110.03 03 10
86630787 58.110.04 02 5 86639326 58.110.04 01 26
86630787 58.110.04 02 5 86639326 58.110.04 02 21
86630787 58.110.04 03 9 86639326 58.110.04 02 21
86630787 58.500.04 7 86639326 58.110.04 03 22
86630787 58.500.05 7 86639326 58.110.04 04 24
86630787 58.500.06 7 86639326 58.110.04 05 25
86630787 58.500.07 7 86639326 58.110.05 01 10
86630787 58.500.08 6 86639326 58.110.05 02 10
86630787 58.500.09 7 86639326 58.130.01 02 31
86630787 58.500.10 6 86705199 58.101.03 1
86630787 58.500.11 7 86837775 55.100.01 10
86630787 88.058.12 01 9 86837775 55.100.02 6
86630787 88.058.12 01 7 86977396 58.145.01 5
86630787 88.058.12 01 7 86977790 35.410.03 30
86630787 88.058.12 01 7 86978770 35.410.01 7
86630787 88.058.12 04 6 86979948 58.100.01 01 3
86630787 88.058.12 04 6 86996213 58.100.03 17
86630787 88.058.13 01 7 86996213 58.100.04 18
86630787 88.058.13 01 7 86997581 58.500.12 3
86630787 88.058.13 01 7 87010605 58.101.03 4
86630787 88.058.13 01 9 87010704 35.410.01 20
86630787 88.058.13 04 6 87010704 35.410.05 31
86630787 88.058.13 04 6 87012736 58.110.05 06 26
86633356 35.410.04 02 30 87015284 58.110.01 11
86633356 35.410.04 04 29 87015284 58.110.01 11
86633356 58.110.04 05 27 87015284 58.110.01 8
86633356 58.131.01 01 14 87015731 58.131.02 03 26
86633356 58.131.01 02 6 87015731 88.058.23 11
86633356 58.131.02 01 14 87015731 88.058.24 11
86633356 58.131.02 02 6 87016 88.058.01 9
86633356 58.131.02 03 23 87016168 88.058.11 1
86633356 88.058.01 6 87016581 58.100.01 01 38
86633356 88.058.23 12 87016606 35.410.05 30
86633356 88.058.24 12 87016607 58.100.04 12
86634225 58.101.03 3 87016613 35.410.03 19
86636815 58.131.04 7 87016613 58.100.03 19
86636815 58.131.05 7 87016613 58.100.04 3
86639035 58.130.01 02 19 87017195 58.101.04 01.1 4
86639311 58.100.03 3 87017195 58.101.06 4
86639311 58.100.04 7 87017196 58.101.04 01.1 3
86639311 88.058.02 10 87017196 58.101.06 3
86639317 58.130.01 02 14 87017766 88.058.11 3
86639325 58.130.03 03 4 87017767 88.058.11 2
87017844 58.120.01 14 87047744 58.105.01 01 11
87018246 58.500.02 2 87047744 58.105.01 02 11
87022025 58.500.12 8 87051496 58.101.05 8
87022092 90.108.02 4 87053085 58.500.12 5
87026147 58.500.01 22 87053169 58.101.04 01 25
87026533 90.108.03 7 87053169 58.101.04 02 25
87028323 58.110.01 17 87053561 58.100.02 11
87028323 58.110.01 14 87061093 88.058.02 5
87028323 58.110.01 17 87280575 88.058.22 7
87029978 58.101.04 01.1 5 87304415 58.100.02 18
87029978 58.101.06 5 87316646 58.500.03 30
87030549 58.101.05 02 5 87316647 58.500.03 29
87031838 58.208.01 01 12 87317006 58.500.03 2
87031838 58.208.02 20 87317453 35.410.05 26
87033290 58.100.01 01 19 87323339 58.120.01 5
87033290 58.100.01 02 10 87330714 58.208.01 01 3
87033290 58.131.04 2 87330714 58.208.01 02 4
87033290 58.131.05 2 87330714 58.208.02 4
87033290 58.131.05 01 5 87371170 58.130.02 01 20
87033290 88.058.05 01 15 87371170 58.130.02 02 23
87033290 88.058.05 02 15 87382 55.404.01 8
87033290 88.058.05 03 15 87400261 58.130.04 06 2
87033290 88.058.05 04 15 87400261 88.058.18 2
87033290 88.058.27 15 87414 58.101.04 02 34
87033290 88.058.27 01 15 87414 58.101.07 3
87033737 58.130.04 06 5 87423314 55.404.01 12
87033816 58.500.01 20 87450165 58.100.02 5
87036557C 58.100.02 87470018 58.110.03 01 7
87036557R 58.100.02 87470018 58.110.03 04 10
87036559 58.100.02 6 87470018 58.110.03 05 10
87036813 58.100.01 01 14 87470018 58.110.06 08 3
87037954 58.101.04 01 27 87470018 88.058.16 16
87037954 58.101.04 02 27 87470018 88.058.17 12
87037954 58.101.05 01 28 87470186 58.110.03 01 3
87039236 55.100.02 5 87470186 58.110.03 03 6
87041731 88.058.37 4 87470186 58.110.03 04 9
87041732 58.100.03 11 87470186 58.110.06 08 5
87041732 58.100.04 11 87470186 88.058.17 13
87045366 58.100.02 1 87470187 58.110.03 01 3
87045530 58.101.04 01 19 87470187 58.110.03 03 5
87045530 58.101.05 01 20 87470187 58.110.03 05 8
87046716 58.101.05 01 1 87470187 58.110.06 08 5
87047050 58.101.04 01 22 87470187 88.058.17 11
87047050 58.101.04 02 22 87470188 58.110.03 01 2
87047050 58.101.05 01 30 87470188 58.110.03 01 3
87047744 58.105.01 11 87470188 58.110.03 02 4
87470188 58.110.03 03 4 87489671 58.110.03 05 1
87470188 58.110.03 05 9 87489671 88.058.12 03 20
87470188 58.110.06 08 4 87489671 88.058.12 04 18
87470188 88.058.16 11 87489676 58.500.01 02 1
87470188 88.058.17 10 87489680 58.110.03 05 3
87470448 88.058.08 2 87489687 58.208.01 02 3
87470814 58.110.04 01 7 87489694 58.110.04 05 15
87470814 58.110.04 02 7 87489695 58.110.03 04 3
87470814 58.110.04 02 7 87490059 58.110.05 03 6
87470814 58.110.04 04 8 87490543 58.110.05 03 3
87470814 58.500.08 8 87490543 88.058.22 14
87470814 58.500.10 8 87490544 58.110.05 03 8
87470814 88.058.12 04 8 87490544 88.058.22 13
87470814 88.058.12 04 8 87493457 58.110.03 03 2
87470814 88.058.13 04 8 87493457 58.110.03 04 1
87470814 88.058.13 04 8 87493457 88.058.12 03 21
87470814 88.058.17 5 87493457 88.058.12 04 19
87471091 58.120.01 13 87493466 58.110.04 01 28
87476136 58.110.05 06 23 87493466 58.110.04 05 4
87476730 58.110.05 06 10 87493466 58.208.04 01 10
87476730 58.500.02 3 87493466 58.208.04 02 10
87476733 58.110.05 06 5 87498650 58.100.01 01 35
87476733 58.500.02 8 87498650 58.100.01 02 17
87477399 58.500.02 35 87498658 58.130.01 02 9
87478394 58.500.02 30 87517774 58.110.05 06 18
87481333 58.208.02 3 87520073 58.110.05 06 9
87485286 58.100.01 01 24 87523837 58.101.04 01 18
87485286 58.100.01 02 12 87523837 58.101.04 02 18
87485736 58.100.01 01 4 87524771 58.100.01 01 7
87485736 58.100.01 02 3 87529352 58.101.05 2
87486956 58.110.05 03 7 87529353 58.101.05 1
87487235 58.110.05 03 17 87533547 58.120.01 46
87487236 58.110.05 03 22 87533547 88.058.10 8
87487254 58.110.05 03 5 87538599 58.130.02 01 4a
87487259 58.110.05 03 19 87542982 58.105.01 31
87487264 58.110.05 03 4 87544154 58.110.03 01 8
87487370 58.110.05 03 24 87552612 58.130.02 01 14
87487370 88.058.22 2 87552612 58.130.02 02 17
87488453 58.110.03 04 8 87554375 58.110.03 01 3
87488952 58.131.01 01 21 87555156 58.110.01 1
87488952 58.131.02 01 21 87555156 58.110.01 1
87488952 58.131.02 03 25 87555156 58.110.01 4
87488952 88.058.23 9 87556072 58.110.01 10
87488952 88.058.24 9 87556072 58.110.01 10
87488952 88.058.25 3 87556072 58.110.01 7
87489671 58.110.03 03 1 87563152 58.110.03 02 10
87564749 35.410.05 29 87630859 88.058.22 11
87568002 58.145.01 3 87630866 58.110.05 03 11
87568699 88.058.22 5 87630866 88.058.22 12
87586145 58.110.05 06 4 87644909 55.100.02 4
87586147 58.500.02 4 87644909 55.100.03 4
87586149 58.110.05 06 7 87645701 58.101.01 3
87586149 58.500.02 6 87646163 35.410.04 02 31
87586150 58.110.05 06 6 87646163 35.410.04 04 30
87586150 58.500.02 7 87647112 35.410.03 1
87586153 58.500.02 20 87647472 58.101.02 02 3
87586154 58.500.02 21 87654194 35.410.02 02 10
87586687 58.110.05 06 14 87654195 35.410.02 02 14
87586687 58.500.02 24 87654196 35.410.02 01 1
87586689 58.500.02 23 87654196 35.410.02 02 16
87586691 58.110.05 06 13 87654198 35.410.02 02 9
87586692 58.110.05 06 19 87654200 35.410.02 02 7
87586693 58.110.05 06 21 87654201 35.410.01 5
87586694 58.500.02 28 87659777 58.100.02 8
87604453 58.110.03 19 87661737 35.410.04 01 4
87604453 58.110.03 01 87661737 35.410.04 03 4
87613254 35.410.04 04 39 87663624 58.100.03 26
87613322 58.110.04 03 28 87663624 58.100.04 23
87613322 58.110.06 09 2 87663841 58.110.03 8
87613322 58.110.06 10 2 87663841 58.110.03 9
87613322 58.110.06 11 7 87663841 58.110.03 01 6
87613322 58.131.04 19 87663841 58.110.03 04 6
87613322 58.131.05 19 87663841 58.110.03 05 7
87613322 58.208.03 4 87663841 88.058.16 15
87613322 58.208.04 01 12 87663841 88.058.17 15
87613322 58.208.04 01 4 87668909 88.058.22 8
87613322 58.208.04 01 8 87676380 35.410.03 27
87613322 58.208.04 02 12 87679530 58.110.04 05 17
87613322 58.208.04 02 4 87682407 58.130.01 01 20
87613322 58.208.04 02 8 87682407 58.130.01 02 18
87613322 88.058.38 9 87683553 35.410.03 23
87613322 88.058.39 7 87685057 58.110.05 06 20
87613322 88.058.40 AA 5 87689122 58.130.01 01 5
87620690 58.120.01 9 87692855 55.100.02 2
87620690 58.120.01 01 7 87692855 55.100.03 5
87620690 58.120.01 02 7 87692858 55.100.03 2
87620690 88.058.16 21 87695580 55.100.02 9
87620690 88.058.17 21 87698568 58.100.03 12
87630328 58.110.05 03 20 87698568 58.100.04 13
87630365 58.110.05 03 13 87699398 88.058.19 2
87630365 88.058.22 10 87702973 58.110.04 01 7
87630859 58.110.05 03 12 87702973 58.110.04 02 3
87702973 58.110.04 02 3 87702974 88.058.13 01 3
87702973 58.110.04 03 7 87702974 88.058.13 01 2
87702973 58.110.04 04 5 87702974 88.058.13 04 2
87702973 58.500.04 5 87702974 88.058.13 04 2
87702973 58.500.05 5 87702974 88.058.16 2
87702973 58.500.06 5 87702974 88.058.17 2
87702973 58.500.07 5 87703820 55.100.02 7
87702973 58.500.08 4 87706509 55.100.03 3
87702973 58.500.09 5 87706918 55.100.03 7
87702973 58.500.10 4 87711966 55.100.02 8
87702973 58.500.11 5 87715239 58.145.01 6
87702973 88.058.12 01 7 87715949 35.410.03 9
87702973 88.058.12 01 5 87717739 58.130.01 01 1
87702973 88.058.12 01 5 87719151 58.208.01 01 10
87702973 88.058.12 01 5 87719151 58.208.02 18
87702973 88.058.12 04 4 87719769 58.110.05 01 3
87702973 88.058.12 04 4 87719769 58.110.05 02 3
87702973 88.058.13 01 5 87723829 35.410.03 18
87702973 88.058.13 01 5 87724927 58.110.05 01 2
87702973 88.058.13 01 5 87724927 58.110.05 02 2
87702973 88.058.13 01 7 87724927 58.110.05 03 1
87702973 88.058.13 04 4 87724927C 58.110.05 02
87702973 88.058.13 04 4 87724927C 58.110.05 03
87702973 88.058.16 8 87724927R 58.110.05 02
87702973 88.058.17 9 87724927R 58.110.05 03
87702974 58.110.04 01 4 87725861 58.208.01 02 13
87702974 58.110.04 02 1 87725861 58.208.02 8
87702974 58.110.04 02 1 87725967 58.100.03 1
87702974 58.110.04 03 2 87725967 58.100.04 2
87702974 58.110.04 04 2 87728899 58.110.03 4
87702974 58.500.04 3 87728899 58.110.03 01 2
87702974 58.500.05 3 87728899 58.110.03 02 3
87702974 58.500.06 3 87728904 58.110.05 02 1
87702974 58.500.07 3 87728905 58.110.03 4
87702974 58.500.08 2 87728905 58.110.03 01 2
87702974 58.500.09 3 87728905 58.110.03 01 3
87702974 58.500.10 2 87728905 58.110.03 03 3
87702974 58.500.11 3 87728905 58.110.03 04 2
87702974 88.058.12 01 2 87728905 58.110.03 05 2
87702974 88.058.12 01 3 87728905 88.058.16 12
87702974 88.058.12 01 3 87728905 88.058.17 18
87702974 88.058.12 01 3 87736062 35.410.06 6
87702974 88.058.12 04 2 87736063 35.410.06 4
87702974 88.058.12 04 2 87736064 35.410.06 8
87702974 88.058.13 01 3 87736072 58.110.03 01 1
87702974 88.058.13 01 3 87736072 58.110.03 01 1
87736077 58.110.03 01 9 87742342 88.058.13 02 16
87736132 35.410.04 02 14 87742342 88.058.13 03 12
87736132 35.410.04 04 14 87742342 88.058.13 03 13
87736132 58.130.01 01 4 87742342 88.058.13 04 14
87736132 58.130.01 02 4 87742342 88.058.13 04 14
87736146 58.130.01 02 5 87749134 58.208.01 02 8
87736151 58.130.01 02 6 87749134 58.208.02 9
87736718 58.131.01 01 16 87751682 58.100.01 01 16
87736718 58.131.02 01 16 87752059 58.208.01 01 2
87736718 58.131.02 03 17 87756741 58.100.03 30
87736718 88.058.20 2 87756741 58.100.04 1
87736718 88.058.23 4 896-11022 35.410.04 02 44
87736718 88.058.24 4 896-11022 35.410.04 04 42
87742342 58.110.04 01 24 896-11022 58.130.01 01 26
87742342 58.110.04 02 16 896-11022 58.130.01 02 23
87742342 58.110.04 02 16 90403432 35.410.03 2
87742342 58.110.04 03 17 90403434 35.410.03 2
87742342 58.110.04 03 10 920397 58.100.03 28
87742342 58.110.04 04 12 920397 58.100.04 26
87742342 58.110.04 05 19 9417866 55.404.01 4
87742342 58.500.05 12 9503184 35.410.04 01 11
87742342 58.500.06 12 9503184 35.410.04 02 28
87742342 58.500.07 12 9503184 35.410.04 03 11
87742342 58.500.08 14 9503184 35.410.04 04 28
87742342 58.500.09 12 9513105 58.100.03 21
87742342 58.500.10 14 9513105 58.100.04 27
87742342 58.500.11 12 9513808 58.100.03 24
87742342 88.058.12 01 10 9513808 58.100.04 21
87742342 88.058.12 01 12 9514326 88.058.19 12
87742342 88.058.12 01 12 9602979 58.500.03 10
87742342 88.058.12 01 12 9621483 58.100.02 9
87742342 88.058.12 02 15 9628503 88.058.01 13
87742342 88.058.12 02 16 9671714 58.101.04 01.1 7
87742342 88.058.12 02 16 9671714 58.101.06 7
87742342 88.058.12 02 15 9706685 58.100.01 01 12
87742342 88.058.12 03 12 9706685 58.100.01 02 5
87742342 88.058.12 03 13 9706685 58.101.01 12
87742342 88.058.12 04 14 9706685 58.101.04 01 7
87742342 88.058.12 04 14 9706685 58.101.04 02 29
87742342 88.058.13 01 12 9706685 58.101.05 01 8
87742342 88.058.13 01 12 9706685 58.110.04 01 20
87742342 88.058.13 01 12 9706685 58.110.04 02 12
87742342 88.058.13 01 10 9706685 58.110.04 02 12
87742342 88.058.13 02 15 9706685 58.110.04 03 23
87742342 88.058.13 02 15 9706685 58.110.04 04 22
87742342 88.058.13 02 16 9706685 58.110.05 01 14
9706685 58.110.05 02 14 9828248 58.130.01 02 13
9706685 58.130.02 02 16 9833222 58.110.04 01 21
9706685 58.131.01 02 13 9833222 58.110.04 02 13
9706685 58.131.02 02 13 9833222 58.110.04 02 13
9706685 58.500.01 6 9833222 58.110.04 03 5
9706685 58.500.01 02 6 9833222 58.110.04 04 20
9706685 88.058.12 03 19 9833222 58.110.04 05 28
9706685 88.058.13 03 19 9833222 58.500.04 9
9706687 35.410.04 02 34 9833222 58.500.05 9
9706687 35.410.04 04 33 9833222 58.500.06 9
9706687 58.110.05 01 13 9833222 58.500.07 9
9706687 58.110.05 02 13 9833222 58.500.08 11
9706687 58.131.04 13 9833222 58.500.09 9
9706687 58.131.05 13 9833222 58.500.10 11
9706687 58.500.01 28 9833222 58.500.11 9
9706687 58.500.01 02 19 9833222 88.058.12 01 5
9706690 35.410.01 22 9833222 88.058.12 01 9
9706690 58.100.02 23 9833222 88.058.12 01 9
9706690 58.101.04 01 12 9833222 88.058.12 01 9
9706690 58.101.04 02 12 9833222 88.058.12 03 17
9706690 58.101.05 01 13 9833222 88.058.12 03 17
9706690 58.105.01 24 9833222 88.058.12 04 11
9706690 58.105.01 01 24 9833222 88.058.12 04 11
9706690 58.105.01 02 24 9833222 88.058.13 01 9
9706690 58.110.04 01 14 9833222 88.058.13 01 9
9706690 58.120.01 47 9833222 88.058.13 01 9
9706690 58.130.04 06 6 9833222 88.058.13 01 5
9706690 58.208.01 02 12 9833222 88.058.13 03 17
9706690 58.208.02 17 9833222 88.058.13 03 17
9706690 58.500.01 31 9833222 88.058.13 04 11
9706690 58.500.01 02 17 9833222 88.058.13 04 11
9706690 88.058.26 5 9833222 88.058.16 6
9706693 58.100.01 02 14 9833222 88.058.17 7
9706694 58.130.01 02 21 9833239 58.101.01 5
9706755 58.110.03 01 10 9833876 58.500.03 26
9706755 58.110.03 02 9 9833879 58.500.02 01 5
9706755 58.110.03 03 9 9833879 58.500.03 8
9801067 58.100.03 32 9840570 35.410.01 12
9801067 58.100.04 30 9842264 58.101.05 7
9804277 58.110.02 02 4 9842291 58.101.04 01 18
9804277 58.208.01 01 14 9842291 58.101.04 02 18
9804277 58.208.02 22 9842291 58.101.05 01 19
9824326 58.105.01 16 9842300 58.101.04 02 23
9824326 58.105.01 01 16 9842301 58.101.04 01 24
9824326 58.105.01 02 16 9842301 58.101.04 02 24
9826789 90.108.03 4 9842301 58.101.05 01 25
9842301 58.101.05 02 3
9850685 35.410.05 22
9993141 35.410.06 11
9993143 35.410.01 13
A43731 55.404.01 3
B95624 58.101.05 02 1
F63434 55.404.01 2
NH291525 58.500.01 02 23
NLS 58.130.03 03 2
NS 58.500.02 01 6
NSS 35.410.05 1
NSS 55.100.03 6
NSS 58.110.03 10
NSS 58.110.03 13
NSS 58.110.03 14
NSS 58.110.03 16
NSS 58.110.03 17
NSS 58.110.03 19
NSS 58.110.03 04 1
NSS 58.110.03 05 1
NSS 58.110.04 01 1
NSS 58.110.04 03 1
NSS 58.110.04 05 1
NSS 58.110.04 05 2
NSS 58.130.01 01 2
NSS 58.130.01 01 3
NSS 58.130.01 02 1
NSS 58.130.01 02 2
NSS 58.130.03 2 5
NSS 58.130.03 2 6
NSS 58.130.03 2 7
NSS 58.130.03 2 8
NSS 58.130.03 2 9
NSS 58.208.04 01 1
NSS 58.208.04 01 5
NSS 58.208.04 01 9
NSS 58.208.04 02 1
NSS 58.208.04 02 5
NSS 58.208.04 02 9
PA556924 58.500.02 01 3
PA556924 58.500.03 7

3020-Plataforma 3020

Uploaded by

Copyright:

Available Formats

3020-Plataforma 3020

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3020-Plataforma 3020

Uploaded by

Copyright:

Available Formats

All rights reserved by CNHi.

VAR - 123782, 789101,987654 - PTO - D650

VAR - 123782, 789101,987654 - PTO - D650

REF FN PART NUMBER YR/SN QTY DESCRIPTION

1 1 86529340 1 SHAFT PTO, Incl 2 - 11

3 NSS 1 NOT SERVICED SEPARATELY, SHAFT, 350mm, Incl in 1

2 Reference - Figure call-out of the part number.

3 Parts supplied in repair kits per symbol reference.

4 Part illustrated on the Page or in the Figure indicated, or calls for

7 1 2 Includes item(s) ...... (See Description within partlist).

8 Orientation. (Arrow indicates front of the machine).

10 General information of the figure.

12 Sequence code within the assembly.

13 Page number within the sequence code.

14 Date of printing or updating of page (month-year).

15 Note - Relating to the Part Number. There is a key to symbols and

17 Further description of the part to help confirm identification.

18 Not available as service part.

21 Total Quantity of the Part referred to in the page.

35.410.02 01 STANDARD HYDRAULIC SYSTEM, 25 FOOT HEADER

35.410.02 02 STANDARD HYDRAULIC SYSTEM, 30 AND 35 FOOT HEADER

35.410.03 HYDRAULICS, REEL ARMS

35.410.04 01 SUSPENSION, CUTTERBAR, STANDARD

35.410.04 02 SUSPENSION, CUTTERBAR, IN-CAB ADJUST OPTION

35.410.04 03 SUSPENSION, CUTTERBAR, STANDARD, DD

35.410.04 04 SUSPENSION, CUTTERBAR, IN-CAB ADJUST, DD

35.410.05 HYDRAULIC CUTTERBAR SUSPENSION, 25, 30, 35 FOOT HEADER

35.410.06 MANIFOLD, HYDRAULIC SYSTEM

55.100.01 HARNESS, FLEX HEADER, MOUNTING

55.100.02 HARNESS, FLEX HEADER

55.100.03 HARNESS, ADAPTER KIT

55.404.01 LIGHT ASSEMBLY, WARNING

58.100.01 01 MAIN DRIVE

58.100.01 02 MAIN DRIVE

58.100.02 REEL DRIVE

58.100.04 BELT DRIVE, WOBBLE BOX, RH, DOUBLE DRIVE ONLY

58.101.01 REEL ARMS

58.101.02 01 REEL ADAPTER

58.101.02 02 REEL, ADAPTER, DD

58.101.03 KIT, REEL TINE FLAP

58.101.04 01 PICKUP REEL, STEEL TINES

58.101.04 01.1 PICK-UP, REEL, TINE STEEL

58.101.04 02 PICKUP REEL, PLASTIC TINES

58.101.05 PLASTIC TINES, PICKUP REEL, 6 BAT

58.101.05 01 KIT, REEL PACKAGE

58.101.05 02 KIT BEARING REEL ARM

58.101.06 STEEL TINES, PICKUP REEL, 6 BAT

58.101.07 HUB, REEL, MOUNTING PARTS

58.105.01 CONTROL ASSEMBLY, HEADER HEIGHT

58.105.01 01 CONTROL ASSEMBLY, HEADER HEIGHT

58.105.01 02 CONTROL ASSEMBLY, HEADER HEIGHT, DOUBLE DRIVE

58.110.01 STRIPPER, ASSY

58.110.01 STRIPPER, ASSY

58.110.01 STRIPPER, ASSY

58.110.01 STRIPPER, ASSY

58.110.02 01 THIRD STRIPPER KIT

58.110.02 02 THIRD STRIPPER KIT, DD

58.110.03 SEGMENTED KNIFE ASSY

58.110.03 SEGMENTED KNIFE ASSY

58.110.03 SEGMENTED KNIFE ASSY