TECH INFO

Product Specifications Sheet

Product Specifications DC Thruster Series

Declaration of Conformity
We, Sleipner Motor AS hearby Decleare that following Side-Power DC thruster products complies with
the EC Directives and Standards:

Leading boat 94/25 Recreational Craft Directive

builders all over 2006/42 Machinery Safety
89/336 Electromagnetic Compatibility
the world choose
Side-Power for SE series Side-Power Electric Tunnel Thruster 30-210kg thrust ON/OFF

performance, SEP series Side-Power Electric Tunnel Thruster 30-240kg thrust Proportional

reliability, ease of
SE-IP series Side-Power Electric Tunnel Thruster 30-170kg thrust ON/OFF-Ignition Protection

SEP-IP series Side-Power Electric Tunnel Thruster 30-170kg thrust Proport. Ignition Protection

installation and SR series Side-Power Retract thruster 80/100kg thrust On/Off

unrivalled safety SRP series Side-Power Retract thruster 80/100kg thrust Proportional

features.
SRL series Side-Power Retract thruster 80/100kg thrust On/Off Low Profile

SRLP series Side-Power Retract thruster 80/100kg thrust Low Profile Proportional

This commitment SRV series Side-Power Retract thruster 80-285kg thrust Vertical On/Off

to quality and SRVP series Side-Power Retract thruster 80-210kg thrust Vertical Proportional

product SRVL series Side-Power Retract thruster 80/100kg thrust Vertical On/Off Low Profile

development
SP Series Side-Power Electric Tunnel Thruster 240/285kg thrust On/Off

EB Series Side-Power Electric Tunnel Thruster 20-90kg thrust On/Off Belt

has made the EX Series Side-Power External Thruster 25-180kg thrust On/Off

Side-Power range SX Series Side-Power External Thruster 80/100kg thrust On/Off External

of thrusters the
SXP Series Side-Power External Thruster 80/100kg thrust Proportional External

benchmark in the FREDRIKSTAD, 26th of January 2016

industry. Arne K Skauen
Managing Director, Sleipner Motor AS

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

Specifications and performance data

• Actual performances will vary for each installation depending on many factors.
• Specifications shown here are based on a thruster installed at a depth equal to one tunnel diameter and with DC electric power at thruster as shown.

SE Series thrusters* SE 30/125 S SE 40/125 S SE 60/185 S SE 80/185 T SE 100/185 T SE 120/215 T

Thrust at 10.5V/ 21V* (kg • lbs)
30 • 66 40 • 88 60 • 132 80 • 176 100 • 220 120 • 264
Thrust at 12V/ 24V*  (kg • lbs) 40 • 88 48 • 105 73 • 161 96 • 212 116 • 256 139 • 306
Typical boat size (ft • m) 20’ - 28’ • 6 - 8.5 26’ - 34’ • 8 - 10.5 29’ - 39’ • 9 - 12 35’ - 48’ • 10 - 15 39’ - 55’ • 12 - 17 42’ - 60’ • 13 - 18
Tunnel I.D. (mm • in) 125 • 4.92’’ 125 • 4.92’’ 185 • 7.3’’ 185 • 7.3’’ 185 • 7.3’’ 215 • 8.46’’
Propulsion system Single Single Single Twin Twin Twin
Power at 10.5V/ 21V* (kw • Hp) 1.5 • 2 2.2 • 3 3.1 • 4 4.4 • 6 6.3 • 8.4 6.4 • 8.55
For DC system (V) 12 12 12/24 12/24 12/24 24
Weight (kg • lbs) 9.5 • 21 10 • 22 16 • 35 20 • 44 31 • 68 34 • 74
Rec. CCA (DIN** 12/24V) 200 300 350 • 175 550/300 750/400 - / 400

Item Code 12V SE30/125S(-IP) SE40/125S(-IP) SE60/185S-12V(12IP) SE80/185T-12V(-12IP) SE100/185T-12V(-12IP)

Item Code 24V SE60/185S-24V(24IP) SE80/185T-24V(-24IP) SE100/185T-24V(-24IP) SE120/215T (-IP)
Item Code 12V PRO* SEP30/125S(-IP) SEP40/125S(-IP) SEP60/185S-12V (IP) SEP80/185T-12V(-12IP) SEP100/185T-12V(-12IP)
Item Code 24V PRO* SEP60/185S-24V (IP) SEP80/185T-24V(-24IP) SEP100/185T-24V(-24IP) SEP120/215T (-IP)

SE 130/250 T SE 150/215 T SE 170/250 TC SE 210/250 TC SP 240 TCi SP 285 TCi

130 • 284 150 • 330 170 • 374 210 • 462 240 • 528 285 • 627
160 • 352 182 • 400 210 • 462 250 • 550 300 • 660 340 • 748
42’ - 62’ • 13 - 19 44’ - 65’ • 14 - 20 50’ - 72’ • 15 - 22 55’ - 78’ • 17 - 24 60’ - 82’ • 18 - 25 72’ - 98’ • 22 - 30
250 • 9.8’’ 215 • 8.46’’ 250 • 9.8’’ 250 • 9.8’’ 300 • 11.8’’ 300 • 11.8’’
Twin Twin Twin Counter rot. Twin Counter rot. Twin Counter rot. Twin Counter rot.
6.5 • 8.7 8.8 • 11.8 8 • 10.7 10 • 13.15 11.4 • 15.5 15 • 20
12/24 24 24 24 24 24 (48V motor)
37 • 77 38 • 79 44 • 97 68 • 150 70 • 154 73 • 160
750/400 - / 560 - / 550 - / 650 - / 700 - / 2x450 - 24V

SE130/250T-12V(-12IP)
SE130/250T-24V(-24IP) SE150/215T SE170/250TC(-IP) SE210/250TC SP240TCi SP285TCi
SEP130/250T-12V(-12IP)
SEP130/250T-24V(-24IP) SEP150/215T SEP170/250TC(-IP) SEP210/250TC SEP240TCi

EB Series thrusters* EBS 20/110 S EB 40/160 S EB 60/160 S EB 75/185 S EB 90/185 S

Thrust at 10.5V/ 21V* (kg • lbs)
20 • 44 40 • 88 60 • 132 75 • 165 90 • 198
Thrust at 12V/ 24V*  (kg • lbs)
Typical boat size (ft • m) up to 23’ • 7 23’ - 29’ • 7 - 8.8 29’ - 38’ • 9 - 12 32’ - 45’ • 9,7 - 14 39’ - 50’ • 12 - 17
Tunnel I.D. (mm • in) 110 • 4.33’’ 160 • 6,3’’ 160 • 6,3’’ 185 • 7.3’’ 185 • 7.3’’
Propulsion system Single Single Single Single Single
Power at 10.5V/ 21V* (kw • Hp) 1.6 • 2.2 2.0 • 2.7 5,0 • 6.8 6,0 • 8.1 6,5 • 8.8
For DC system (V) 12 12 12/24 12/24 12/24
Weight (kg • lbs) 5 • 11 13 • 28,5 15 • 33 17 • 37,5 17 • 37,5
Rec. CCA (DIN** 12/24V) 200 250 630/ 315 750/375 820/410

Item Code 12V EBS20/110S EB40/160S EB60/160S-12V EB75/185S-12V EB90/185S-12V

Item Code 24V EB60/160S-24V EB75/185S-24V EB90/185S-24V

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

SR Series thrusters* SR 80/185 T SR 100/185 T SRL 80/185 T SRL 100/185 T SRV 80/185 T
Thrust at 10.5V/ 21V* (kg • lbs) 80 • 176 100 • 220 80 • 176 100 • 220 80 • 176
Thrust at 12V/ 24V*  (kg • lbs) 96 • 212 96 • 212 96 • 212 96 • 212 96 • 212
Typical boat size (ft • m) 35’ - 48’ • 10 - 15 35’ - 55’ • 12 - 17 35’ - 48’ • 10 - 15 35’ - 55’ • 12 - 17 35’ - 48’ • 10 - 15
Tunnel I.D. (mm • in) 185 • 7.3’’ 185 • 7.3’’ 185 • 7.3’’ 185 • 7.3’’ 185 • 7.3’’
Propulsion system Twin Twin Twin Twin Twin
Power at 10.5V/ 21V* (kw • Hp) 4.4 • 6 6.3 • 8.4 4.4 • 6 6.3 • 8.4 4.4 • 6
For DC system (V) 12/24 12/24 12/24 12/24 12/24
Weight (kg • lbs) 31 • 68 44 • 97 31 • 68 44 • 97 31 • 68
Rec. CCA (DIN** 12/24V) 550/300 750/400 550/300 750/400 550/300
Installation mould-in mould-in flange flange flange

Item Code 12V SR80/185T-12V SR100/185T-12V SRL80/185T-12V SRL100/185T-12V SRV80/185T-12V

Item Code 24V SR80/185T-24V SR100/185T-24V SRL80/185T-24V SRL100/185T-24V SRV80/185T-24V
Item Code 12V PRO* SRP80/185T-12V SRP100/185T-12V SRLP80/185T-12V SRLP100/185T-12V SRVP80/185T-12V
Item Code 24V PRO* SRP80/185T-24V SRP100/185T-24V SRLP80/185T-24V SRLP100/185T-24V SRVP80/185T-24V

SRV 100/185 T SRV 130/250 T SRV 170/250 TC SRV 210/250 TC SRV 285/300 TC
100 • 220 130 • 284 170 • 374 210 • 462 285 • 627
116 • 256 160 • 352 210 • 462 250 • 550 340 • 748
35’ - 55’ • 12 - 17 42’ - 62’ • 13 - 19 50’ - 70’ • 15 - 22 55’ - 78’ • 17 - 24 72’ - 98’ • 22 - 30
185 • 7.3’’ 250 • 9.8’’ 250 • 9.8’’ 250 • 9.8’’ 300 • 11.8’’
Twin Twin Twin Counter rot. Twin Counter rot. Twin Counter rot.
6.3 • 8.4 6.5 • 8.7 8 • 10.7 11 • 14.5 15 • 20
12/24 12/24 24 24 24 (48V motor)
44 • 97 82 • 181 88 • 194 112 • 247 117 • 258
750/400 750/400 550 650 - / 2x450 - 24V
flange flange flange flange flange

SRV100/185T-12V SRV130/250T-12V
SRV100/185T-24V SRV130/250T-24V SRV170/250TC-24V SRV210/250TC-24V SRV 285/300TC-48
SRVP100/185T-12V SRVP130/250T-12V
SRVP100/185T-24V SRVP130/250T-24V SRVL170/250TC-24V SRVP210/250TC-24V

EX Series thrusters EX 35 S EX 55 S EX 75 S EX 95 S EX 110 D EX 180 D

Thrust at 11.5V/ 23V* (kg • lbs)
25 • 55 40 • 88 53 • 117 67 • 148 80 • 176 130 • 264
Performance thrust*  (kg • lbs) 35 • 77 55 • 121 74 • 163 95 • 210 110 • 243 180 • 397
Typical boat size (ft • m) 20’ - 28’ • 6 - 8.5 26’ - 34’ • 8 - 10.5 29’ - 38’ • 9 - 12 35’ - 48’ • 10 - 15 35’ - 53’ • 12 - 16 44’ - 59’ • 14 - 18
Tunnel I.D. (mm • in) 150 • 5.9’’ 150 • 5.9’’ 150 • 5.9’’ 150 • 5.9’’ 150 • 5.9’’ 150 • 5.9’’
Propulsion system Single Single Single Single Dual Dual
Power at 11.5V/ 23V* (kw • Hp) 1.3 • 1.75 1,8 • 2.4 2,3 • 3.1 3,0 • 4,0 4,0 • 5.4 6,0 • 8.0
For DC system (V) 12 12 24 24 12 24
Weight (kg • lbs) 19,5 • 43 19,5 • 43 19,5 • 43 19,5 • 43 35 • 77 35 • 77
Rec. CCA (DIN** 11,5/23V) 170 225 150 190 250 375

Item Code 12V EX35S EX55S

Item Code 24V EX75S EX95S EX110D EX180D

EX 25 C EX 40 C EX 55 C EX 70 C
25 • 55 40 • 88 53 • 117 67 • 148
- - - -
18’ - 26’ • 5 - 8 24’ - 34’ • 7,5 - 10,5 28’ - 36’ • 8,5 - 11 32’ - 42’ • 9,5 - 13
150 • 5.9’’ 150 • 5.9’’ 150 • 5.9’’ 150 • 5.9’’
Single Single Single Single
1.3 • 1.75 1,8 • 2.4 2,3 • 3.1 3,0 • 4.0
12 12 24 24
12 • 26,5 12 • 26,5 12 • 26,5 12 • 26,5
170 225 150 190

EX25C EX40C
EX55C EX70C

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

SX Series thrusters SX 80/185 T SX 100/185 T

Thrust at 10.5V/ 21V* (kg • lbs)
80 • 176 100 • 220
Thrust at 12V/ 24V*  (kg • lbs) 96 • 212 116 • 256
Typical boat size (ft • m) 35’ - 48’ • 10 - 15 35’ - 55’ • 12 - 17
Tunnel I.D. (mm • in) 185 • 7.3’’ 185 • 7.3’’
Propulsion system Twin Twin
Power at 10.5V/ 21V* (kw • Hp) 4.4 • 6 6.3 • 8.4
For DC system (V) 12/24 12/24
Weight (kg • lbs) 52 • 115 57 • 125
Rec. CCA (DIN** 12/24V) 550/300 750/400

Item Code 12V SX80/185T-12V SX100/185T-12V

Item Code 24V SX80/185T-24V SX100/185T-24V
Item Code 12V PRO* SXP80/185T-12V SXP100/185T-12V
Item Code 24V PRO* SXP80/185T-24V SXP100/185T-24V

Product features

• For more information regarding each feature go to our website and read more, or contact your Side-Power representative.

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

Battery and cable recommendations

SE, SEP, IP, SR, SRV, SRL, SX - series

• All cable lengths are the total of both - and + cables.
• Battery size is stated as minimum cold crank capacity, not Ah.
• Use slow fuse rated to hold stated Amp-Draw for min. 5 minutes.

Minimum and recommended cable dimensions can be identical due to safety margins and cable heat considerations for short cable lenghts.
* Minimum or recommended cable cross section in mm2

<7m total 7-14m total 15-21m total 22-28m total 28-35m total 36-45m total
Nominal
Volt- Rec. +&- +&- +&- +&- +&- +&-
Model current Min. battery CCA
age fuse
draw
Min. Rec. Min. Rec. Min. Rec. Min. Rec. Min. Rec. Min. Rec.

SE30/125S DIN: 200 ANL mm2 35 50 50 70 70 95 95 120 120 2x70 2x70 2x95
12 V 225 A
SAE:380 150 AWG 1 1/0 1/0 2/0 2/0 3/0 3/0 4/0 4/0 2x 2/0 2x2/0 2x 3/0

SE40/125S DIN: 300 ANL mm2 35 50 70 95 95 120 120 2x95 2x95 2x120 2x120
12 V 315 A 260*
SAE: 570 250 AWG 1 1/0 2/0 3/0 3/0 4/0 4/0 2x 3/0 2x 3/0 2x 4/0 2x 4/0

SE60/185S DIN: 350 ANL mm2 50 50 70 95 120 2x 70 2x70 2x95 2x 95 2x120 2x120
12 V 370 A 280*
SAE:665 250 AWG 1 1/0 2/0 3/0 4/0 2x 2/0 2x2/0 2x 3/0 2x 3/0 2x 4/0 2x 4/0

DIN: 175 ANL mm2 25 35 25 35 25 35 35 50 50 60 60 70

24 V 170 A
SAE: 332 150 AWG 1 1 1 1 1 1 1 1/0 1/0 2/0 2/0 2/0

SE80/185T DIN: 550 ANL mm2 70 70 120 2x 70 2x 70 2x 95 2x 95 2x 120

12 V 530 A 2x120 340* NA NA
SAE:1045 400 AWG 2/0 2/0 3/0 2x 2/0 2x 2/0 2x 2/0 2x 3/0 2x 4/0

DIN: 300 ANL mm2 35 35 35 50 70 70 70 95 95 120 120 2x 95

24 V 260 A
SAE: 570 250 AWG 1 1 1 1/0 2/0 2/0 2/0 3/0 3/0 4/0 4/0 2x 3/0

SE100/185T DIN: 750 ANL mm2 95 95 2x 70 2x 95 2x 95

12 V 740 A SAE: 1425 500 AWG 3/0 3/0 2x 2/0 2x 3/0 2x 3/0 280* 250* 375* NA NA NA NA

DIN: 400 ANL mm2 50 50 50 70 70 95 95 120 120 2x 95 2x95 2x 120

24 V 340 A
SAE: 760 325 AWG 1 1/0 1/0 2/0 2/0 3/0 3/0 4/0 4/0 2x 3/0 2x 3/0 2x 4/0

SE120/215T DIN: 450 ANL mm2 70 50 70 95 120 150

24V 420 A - - - - - -
SAE: 855 325 AWG 1/0 0 2/0 3/0 4/0 2x2/0

SE130/250T 12V DIN: 400 ANL mm2 95 2x70 2x95 250* 375*
800 A - - - - -
SAE: 760 500 AWG 3/0 2x2/0 2x3/0

24V DIN: 400 ANL mm2 35 50 70 95 120 2x95

340 A - - -
SAE: 760 325 AWG 1 1/0 2/0 3/0 4/0 2x3/0

SE150/215T DIN: 500 ANL mm2 70 95 120 2x95 2x95 2x95

24V 610 A - - - - - -
SAE: 900 500 AWG 2/0 3/0 4/0 2x3/0 2x3/0 2x4/0

SE 170/250 DIN: 500 ANL mm2 70 95 120 2x70 2x95 2x120

24V 550 A - - - - - -
SAE: 950 400 AWG 0 3/0 4/0 2x2/0 2x3/0 2x4/0

SE 210/250 DIN: 700 ANL mm2 70 95 120 2x70 2x95 2x120

24V 500 A - - - - -
SAE: 1330 400-500 AWG 2/0 - 3/0 4/0 2x2/0 2x3/0 2x4/0

SP 240/300 DIN: 700 ANL mm2 70 95 120 190 (350CCA) 2x95 (400CCA) 2x120 (400CCA)
24V 610-670A - - -
SAE: 1330 500 AWG 2/0 3/0 4/0 2x3/0 (665CCA) 2x3/0 (760CCA) 2x4/0 (760CCA)

SP 285/300 24*2 DIN: 400 ANL mm2 50 70 95 95 103 140

400-430A (48V) - - - - - -
48V SAE: 760 325 AWG 1 2/0 3/0 3/0 0 2x00

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

Battery and cable recommendations EB-series and EX-series

• All cable lengths are the total of both - and + cables.
• Battery size is stated as minimum cold crank capacity, not Ah.
• Use slow fuse rated to hold stated Amp-Draw for min. 5 minutes.

Minimum and recommended cable dimensions can be identical due to safety margins and cable heat considerations for short cable lenghts.
* Minimum or recommended cable cross section in mm2

>5m total 1-10m total 10-20m

Nominal current Min. battery Rec.
Model Voltage +&- +&- total + & -
draw
CCA Fuse Min. Rec. Min. Rec. Min. Rec.

EBS20 DIN: 200 mm2 50

12 V 60 A 150 - - - - -
SAE:380 AWG 1/0

EB40 DIN: 300 mm2 50 70

12 V 115 A 250 - - - -
SAE:570 AWG 1/0 2/0

EB60 DIN: 350 mm2 95 120

12 V 115 A 400 - - - -
SAE:665 AWG 3/0 4/0

DIN: 175 mm2 95 95

24 V 115 A 325 - - - -
SAE:380 AWG 3/0 3/0

EB75 DIN: 500 mm2 95 120

12 V 115 A 400 - - - -
SAE: 950 AWG 3/0 4/0

DIN: 250 mm2 95 95

24V 150 A 325 - - - -
SAE:475 AWG 3/0 3/0

EB90 DIN: 500 mm2 95 120

12 V 115 A 400 - - - -
SAE:950 AWG 3/0 4/0

DIN: 250 mm2 95 95

24V 150 A 325 - - - -
SAE:475 AWG 3/0 3/0

>8m total 8-16m total

Model Min. battery Rec.
Nominal current +&- +&-
Voltage
draw
CCA Fuse Min. Rec. Min. Rec.

EX35S DIN: n/a mm2 35 70

12 V 140 A 100 - -
EX25C SAE:550 AWG 2/0

EX55S DIN: n/a mm2 50 70

12 V 187 A 125 - -
EX40C SAE:550 AWG 1/0 2/0

EX75S DIN: n/a mm2 25 50

24 V 120 A 80 - -
EX55C SAE:550 AWG 1/0

EX95S DIN: n/a mm2 50 70

24V 175 A 100 - -
EX70C SAE:550 AWG 1/0 2/0

DIN: n/a mm2 50 70

EX110D 12 V 2x187 A 2x125 - -
SAE:550 AWG 1/0 2/0

DIN: n/a mm3 50 70

EX180D 24V 2x175 A 2x125 - -
SAE:551 AWG 1/0 2/0

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

Measurements SE Series
D
C

WATERLINE
WATERLINE
B

E
E

A A

G G

Thruster A B C D Emin F Frecommended Gmin Gmax

(mm • in)
SE30/125S 125 • 4.92 245 • 9.65 190 • 7.5 180 • 7.1 125 • 4.9 92 • 3.6 184 • 7.25 4 • 0.16 5 • 0.20
SE40/125S 125 • 4.92 245 • 9.65 190 • 7.5 180 • 7.1 125 • 4.9 92 • 3.6 184 • 7.25 4 • 0.16 5 • 0.20
SE60/185S 185 • 7.3 268 • 10.5 208 • 8.2 197 • 7.8 150 • 5.9 117 • 4.6 234 • 9.2 4 • 0.16 6 • 0.24
SE80/185S 185 • 7.3 361 • 14.2 208 • 8.2 200 • 7.9 200 • 79 170 • 6.7 340 • 13.4 6 • 0.24 8 • 0.31
SE100/185T 185 • 7.3 396 • 15.6 245 • 9.6 245 • 9.6 200 • 7.9 170 • 6.7 340 • 13.4 6 • 0.24 8 • 0.31
SE120/215T 215 • 8.46 389 • 15.3 245 • 9.6 250 • 9.8 215 • 8.5 280 • 11.0 560 • 22.0 6 • 0.24 8 • 0.31
SE130/250T 250 • 9.84 398 • 15.7 254 • 10.0 256 • 10.1 230 • 9.0 280 • 11.0 560 • 22.0 7 • 0.28 10 • 0.39
SE150/215T 215 • 8.46 398 • 15.7 254 • 10.0 260 • 10.2 230 • 9.0 280 • 11.0 560 • 22.0 7 • 0.28 10 • 0.39
SE170/250TC 250 • 9.84 421 • 16.6 230 • 9.1 256 • 10.1 250 • 9.8 300 • 11.8 600 • 23.6 7 • 0.28 10 • 0.39
SE210/250TC 250 • 9.84 478 • 18.8 260 • 10.2 281 • 7.5 250 • 9.8 300 • 11.8 600 • 23.6 7 • 0.28 13 • 0.51
SP240TCi 300 • 11.81 503 • 19.8 266 • 10.5 296 • 11.7 300 • 11.8 300 • 11.8 600 • 23.6 10 • 0.39 13 • 0.51
SP285TCi 300 • 11.81 455 • 17.9 270 • 10,6 310 • 12.2 300 • 11.8 300 • 11.8 600 • 23.6 10 • 0.39 13 • 0.51

Stern thruster I II IIImin IVmax V VI Tunnel

(mm • in) Length
SE30/125S 207 • 8.15 190 • 7.48 135 • 5.31 14 • 0.55 160 • 6.3 217 • 8.5 197 • 7.76
SE40/125S 207 • 8.15 190 • 7.48 135 • 5.31 14 • 0.55 160 • 6.3 217 • 8.5 197 • 7.76 Waterline
IV
SE60/185S 228 • 8.97 256 • 10.1 150 • 5.91 35 • 1.38 200 • 7.8 300 • 11.8 337 • 13.27 max

SE80/185S 321 • 13.7 256 • 10.1 200 • 7.87 54 • 2.13 200 • 7.8 300 • 11.8 337 • 13.27 II
SE100/185T 356 • 14.0 256 • 10.1 200 • 7.87 54 • 2.13 200 • 7.8 300 • 11.8 337 • 13.27 III
SE120/215T 349 • 4.92 300 • 11.8 215 • 8.46 54 • 2.13 200 • 7.8 300 • 11.8 330 • 13.0
SE130/250T 359 • 14.13 340 • 13.4 250 • 9.84 60 • 2.36 200 • 7.8 350 • 11.8 350 • 13.87 V VI
SE150/215T 359 • 14.13 300 • 11.8 215 • 8.46 54 • 2.13 200 • 7.8 350 • 13.8 330 • 13.0
SE170/250TC 382 • 15.04 340 • 13.4 250 • 9.84 60 • 2.36 200 • 7.8 350 • 13.8 350 • 13.87
SE210/250TC 420 • 46.54 360 • 14.2 300 • 11.81 50 • 1.97 200 • 7.8 350 • 13.8 350 • 13.87
SP240TCi 454 • 17.9 420 • 16.5 300 • 11.81 60 • 2.36 258 • 10.2 396 • 15.6 456 • 17.95
SP285TCi 406 • 15.98 420 • 16.5 300 • 11.81 60 • 2.36 258 • 10.2 396 • 15.6 456 • 17.95 I

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

Measurements SE IP Series
D C

B
Waterline Waterline Waterline

E
C II
E
C III

A A

GE EG

F
D

Thruster A B C D Emin F Frecommended Gmin Gmax

(mm • in)
SE30/125S IP 125 • 4.92 245 • 9.6 226 • 8.9 230 • 9.1 125 • 4.92 92 • 3.6 184 • 7.25 4 • 0.16 5 • 0.20
SE40/125S IP 125 • 4.92 245 • 9.6 226 • 8.9 230 • 9.1 125 • 4.92 92 • 3.6 184 • 7.25 4 • 0.16 5 • 0.20
SE60/185S IP 185 • 7.3 270 • 10.6 230 • 9.1 272 • 10.7 150 • 5.91 117 • 4.6 234 • 9.2 4 • 0.16 6 • 0.24
SE80/185S IP 185 • 7.3 376 • 14.8 262 • 10.3 327 • 12.9 200 • 7.87 170 • 6.7 340 • 13.4 6 • 0.24 8 • 0.31
SE100/185T IP 185 • 7.3 451 • 17.8 308 • 12.1 382 • 15.0 200 • 7.87 170 • 6.7 340 • 13.4 6 • 0.24 8 • 0.31
SE120/215T IP 215 • 8.46 451 • 17.8 308 • 12.1 382 • 15.0 215 • 8.46 280 • 11 560 • 22.0 6 • 0.24 8 • 0.31
SE130/250T IP 250 • 9.84 451 • 17.8 308 • 12.1 382 • 15.0 230 • 9.00 280 • 11 560 • 22.0 7 • 0.28 10 • 0.39
SE170/250TC IP 250 • 9.84 451 • 17.8 308 • 12.1 382 • 15.0 250 • 9.84 300 • 11.8 600 • 23.6 7 • 0.28 10 • 0.39

B
Waterline Waterline Waterline
IV

C II
C III

A A

Stern thruster I II IIImin IVmax V VI Tunnel V VI

E
(mm • in) Length
SE30/125S IP 226 • 8.89 190 • 7.48 135 • 5.1 14 • 0.55 160 • 6.3 217 • 8.5 197 • 7.76
SE40/125S IP 226 • 8.89 190 • 7.48 135 • 5.31 D
14 • 0.55 160 • 6.3 217 • 8.5 197 • 7.76 I
SE60/185S IP 235 • 10.43 256 • 10.1 150 • 5.91 35 • 1.38 200 • 7.8 300 • 11.8 337 • 13.27
SE80/185S IP 399 • 15.70 256 • 10.1 200 • 7.87 54 • 2.13 200 • 7.8 300 • 11.8 337 • 13.27
SE100/185T IP 414 • 16.29 256 • 10.1 200 • 7.87 44 • 1,73 200 • 7.8 300 • 11.8 337 • 13.27
SE120/215T IP 417 • 16.40 300 • 11.8 215 • 8.46 44 • 1.73 200 • 7.8 300 • 11.8 330 • 13.00
SE130/250T IP 417 • 16.40 340 • 13.4 250 • 9.84 60 • 2.36 200 • 7.8 350 • 13.8 350 • 13.87
SE170/250TC IP 4
17 • 16.40 340 • 13.4 250 • 9.84 60 • 2.36 200 • 7.8 350 • 13.8 350 • 13.87

Version 1_0_3_2016
 TECH INFO

Product Specifications Sheet

Measurements EB Series

Model EBS20 EB40 EB60 EB75 EB90

A 197 • 7.8 270 • 10.63 310 • 12.25 310 • 12.25 310 • 12.25

B 158 • 6.25 150 • 6.0 150 • 6.0 150 • 6.0 150 • 6.0

C 106 • 4.2 120 • 4.75 130 • 5.15 130 • 5.15 130 • 5.15

D 29 +/-5 • 1.15 +/- 0.2 15+/-8 • 0.6 +/- 0.32 15+/-8 • 0.6 +/- 0.32 50+/-8 50+/-8

E 180 • 7.1 192 • 7.6 192 • 7.6 200 • 7.9 200 • 7.9

F 135 • 5.32 198 • 7.8 210 • 8.3 210 • 8.3 210 • 8.3

G 136 • 5.36 65,5 • 2.6 65,5 • 2.6 75 • 3.0 75 • 3.0

H 110 • 4.34 160 • 6.3 160 • 6.3 185 • 7.3 185 • 7.3

I 286 • 11.3 230 • 9.1

Measurements in mm • in
J 248 • 9.8

K 130,5 • 5.12 6 5 4 3 2 1

L 24,5 • 0.95
EB 40 D
A F

M 25 • 0.99

N 120 • 4.73
G

I
C
EBS 20
B

C
6 5 4 3 2 1
D

F J
D D
A H

B
C
B

C C

E
D
I

N
M L Designed by Material Type Date Drawing nr Tolerance NS-ISO

K gille 29.11.2013 SM-104534

A Copyright All rights reserved Title
H XF 40R 12V
EB 40/60 VIEWS FOR CATALOGUE
SLEIPNERMOTORAS
Part nr Weight Size Scale Edition Sh
EB40/160S 20,643 kg A3 1 1/
B 6 6 B 5 5 4 4 3 3 2 2 1 1

E
A F

EB 60/
D
G

75/90
ASSEMBLY VIEWS FOR CATALOGUE
Designed by Material Type Date Drawing nr Tolerance NS-ISO 2768-1

gille 28.11.2013 SM-105240

C

A Copyright All rights reserved Title

EB 20 ASSEMBLY A
B

SLEIPNERMOTORAS
Part nr Weight Size Scale Edition Sheet
EB20/110S 10,503 kg A3 1 1/1
6 5 4 3 2 1
C
D

E
Designed by Material Type Date Drawing nr Tolerance NS-ISO 2768-1

gille 29.11.2013 SM-104897

A Copyright All rights reserved Title
XF90R 12V

Version 1_0_3_2016
SLEIPNERMOTORAS
Part nr
EB 75/90 VIEWS FOR CATALOGUE
Weight Size Scale Edition Sheet
EB90/12V 31,183 kg A3 1 1/1
6 5 4 3 2 1
 466 [18,346 Zoll]

M30x1,5 Ø30 [1,181 Zoll]

TECH INFO

Product Specifications Sheet

306 [12,065 Zoll]
176 [6,929 Zoll]

Measurements EX Series
65 [2,559 Zoll]

818 [32,205 Zoll] eXtURN Installation and Operation Manual 3.1

11. APPENDIX
EX Single
306 [12,029sheet
11.1. Dimension Zoll] eXtURN 294
Simplex
[11,575 Zoll]
EX Compact
(M30x1,5) Ø30 [1,181 Zoll] (130) Zoll] (130) 6 152 [5,984 Zoll] 5 4 3 2
• 6,0
153,5
• 12.05 Zoll]
306 [12,029 • 11.6 Zoll]
294 [11,575 • 5.98 Zoll]
152 [5,984
79 [3,099

71 • 2.8
13 [0,523 Zoll]
(M30x1,5) • 1.18 Zoll]
Ø30 [1,181 D 152 [5,984 Zoll]
79 [3,099 Zoll]

• 0.51 Zoll]
13 [0,523
[6,496 Zoll]

13 [0,523 Zoll]
eXtURN Installation and Operation Manual 3.1

165 • 6.5
Zoll]Zoll]

5.41 Zoll]
554 [21,795 Zoll]
165
•[6,496

137,5 •[5,413
11.4. Dimension sheet eXtURN Duplex
[6,496 6.5

1079 [42,476 Zoll]

165 165

C 165 [6,496 Zoll] 294 • 11.6

554 •[21,795
21.8 Zoll] 1079 [42,476Zoll]
466 [18,346 Zoll]
165 •[6,496
6.5 Zoll] 466 [18,346 Zoll]
M30x1,5 Ø30 [1,181 Zoll]
165 [6,496 Zoll] 254 • 10.0
254 [10 Zoll] M30x1,5 Ø30 [1,181 Zoll]

65 [2,559 Zoll] 40 [1,575 Zoll]

165 • 6.5

254 •[10
10.0
Zoll]

• 1.58
40
65 •[2,559
2.55 Zoll]
40 B[1,575
• 1.58 Zoll]

176 [6,929 Zoll]

Massblatt
176 [6,929
• 6.93 Zoll] 306 [12,065 Zoll]
176 [6,929 Zoll]
306 [12,065 Zoll]
Datum Name
176 [6,929 Zoll] 65 [2,559 Zoll] 11.05.2010 Administrator
BR He
Gezeichnet

A Kontrolliert

eXtURN Installation and Operation Manual 3.1

65 [2,559 Zoll]
Norm

marinno B01.00
EX Dual
11.4. Dimension sheet eXtURN Duplex 6 5 4
Status Änderungen

3
Datum Name

1079 [42,476 Zoll]

818 [32,205 Zoll]
1079 • 42.5 Zoll]
[42,476
466 [18,346 Zoll]
818 [32,205 Zoll]
• 18.35Zoll]
466 [18,346
M30x1,5 Ø30 [1,181 Zoll]
M30x1,5 • 1.18Zoll]
Ø30 [1,181

306 [12,029 Zoll] 294 [11,575 Zoll]

0.51 Zoll] (130)

152 [5,984 Zoll]

(M30x1,5) Ø30 [1,181 Zoll] • 5.98Zoll]
152 [5,984 Zoll] 152 [5,984
79 •[3,099

13 [0,523 Zoll]
• 6.5 Zoll]
13 [0,523
13 [0,523 Zoll]
Zoll]

Zoll] Zoll]
Zoll]
Zoll]
[6,496

[5,413[5,413
[6,496
• 6.5

306 [12,065 Zoll]

[6,496

137,5137,5
165

176 [6,929 Zoll] 554 [21,795 Zoll]

• 12.05Zoll]
306 [12,065
165165

• 6.93Zoll]
176 [6,929 65 [2,559 Zoll]
165 [6,496 Zoll]
65 •[2,559
2.56 Zoll] 165 •[6,496
6.5 Zoll]
165 [6,496 Zoll]

28
254 [10 Zoll]
818 [32,205 Zoll]
65 [2,559 Zoll] 40 [1,575 Zoll]
• 32.20Zoll]
818 [32,205

306 [12,029 Zoll] 294 [11,575 Zoll]

176
152[6,929
[5,984Zoll]
31 Version 1_0_3_2016
Zoll] (130)

Zoll]
(M30x1,5) Ø30 [1,181 Zoll] 152 [5,984 Zoll] 152 [5,984 Zoll]
 TECH INFO

Product Specifications Sheet

Measurements SR Series GB Measurements, thruster N Målskisse, truster

     

A

E 
 

B


 

WATERLINE
G


D
E
H


 C 


A
SR80/185T
    F
  
G

Thruster A
8 8
B C D

7 7 min
E 6


6
F 5G H
5


   






 4 4
(mm • in) 



   



SR80/185T 335 • 13.2


413 • 16.3

245 • 9.6  185 • 7.3 
716 • 28.2  450 • 17.7 
218 • 8.6 92 • 3.6
SR100/185T F 335F • 13.2 460 • 18.1 245 • 9.6 185 • 7.3 745 • 29.3 450 • 17.7 218 • 8.6 92 • 3.6


 
B
E


D


 


E E G

SR100/185T WATERLINE


      


SR80/185T - SR100/185T
1.1.0 - 2010  
3




   

 H
      E

D D

A A

C F G
D

Thruster A B C D E F G G(w. Hyd. motor) Hmin

(mm • in)C C
SRV80/185T 450 • 17.7 564 • 22.2 Ø185 • 7.3 335 • 13.2 359 • 14.1 234 • 9.2 500 • 19.7 353 • 13.9 185 • 7.3
SRV100/185T 450 • 17.7 564 • 22.2 Ø185 • 7.3 335 • 13.2 359 • 14.1 234 • 9.2 535 • 21.1 353 • 13.9 185 • 7.3
SRV130/250T 600 • 23.6 688 • 27.1 Ø250 • 9.8 395 • 15.6 480 • 18.9 370 • 14.7 594 • 23.4 482 • 19.0 250 • 9.8
SRV170/250TC 600 • 23.6 688 • 27.1 Ø250 • 9.8 395 • 15.6 480 • 18.9 370 • 14.7 609 • 24.0 482 • 19.0 250 • 9.8
SRV210/250TC 600 • 23.6 688 • 27.1 Ø250 • 9.8 395 • 15.6 480 • 18.9 370 • 14.7 694 • 27.3 482 • 19.0 250 • 9.8
SRV285/300TC 600 • 23.6 843 • 33.2 Ø300 • 11.8 580 • 15.6 580 • 22.8 413 • 16.3 732 • 28.8 - • - 300 •11.8

B B
Version 1_0_3_2016
 TECH INFO
Contents
Technical specifications ............................................................. 2
Planning & important precautions.............................................. 3
Stern thruster installation considerations................................... 3

Product Specifications Sheet

Bolt on installation .................................................................... 4
nstallation measurements..........................................................5
DECLARATION OF CONFORMITY
Electrical installation ................................................................. 6
Control panel and control-leads................................................. 7 We, Sleipner Motor AS
Visual wiring diagram ................................................................ 8 P.O. Box 519

Measurements SR Series
Technical wiring diagram .......................................................... 9
Electrical installation of stern thruster systems ..........................9
N-1612 Fredrikstad, Norway
declare that this product with accompanying
mportant user precautions ...................................................... 10 standard remote control systems complies with the
How to use Sidepower thrusters.............................................. 11 essential health and safety requirements according
Maintenance ............................................................................ 12 to the Directive 89/336/EEC of 23 May 1989
Troubleshooting ....................................................................... 13 amended by 92/31/EEC and 93/68/EEC.
Warranty statement ................................................................
B 14
Checklist .................................................................................. 15
E
Parts list ................................................................................... 15
Service centres ....................................................................... 16

Technical Gspecifications WATERLINE

Motor: Custom made reversible DC-motor, 12 or 24 Volt

Motor output: SX80: 4,4kW SX100: 6kW
H
Gearhouse: Seawater resistant bronze. Ballbearing at propellershaft; combination of ballbearing and slide bearing at
driveshaft.
Motor bracket: Seawaterresistant aluminium.
A
gnition protection: Conforms to ISO 8846
C
Propeller: 5 blade skew "Q"-propeller , fibreglass reinforced composite.
Batteries: Minimum recommended battery capacity (cold crank capacity by DIN standard)
SX 80/185T 12V : 550 CCA DIN/1045 CCA SAE
SX 80/185T 24V : 300 CCA DIN/570 CCA SAE F
SX 100/185T 12V : 750 CCA DIN/1425 CCA SAE
SX 100/185T 24V
Thruster A B : 400 CCAC
DIN/760 CCA
D SAE E F G Hmin
(mm • in)
Max. use: S2 = 3 min. or appr. 7-10% within a limited time frame. All electromotors are protected against overheating.
SRL80/185T 500 • 17.7 845 • 33.3 Ø185 • 7.3 335 • 13.2 359 • 14.1 234 • 9.2 352 • 13.6 185 • 7.3
Safety: Electronic time-lapse device protects against sudden change of drive direction. Electric thermal cut-off switch in
SRL100/185T 500 • 17.7 845 • 33.3 Ø185 • 7.3 335 • 13.2 359 • 14.1 234 • 9.2 352 •
electromotor protects against over heating (auto reset when electro motor cools down). 13.6 185 • 7.3

Flexible coupling between electro-motor and driveshaft protects electromotor and gearsystem if propeller gets
jammed.

Measurements SX Series
If original Sidepower panel is used, the panel shuts off automatically 6 minutes after last use.
Integrated microprocessor monitors solenoids, reducing wear and risk of solenoid lock-in. Auto-stop of thruster in
case of accidental solenoid lock-in or if run signal is continous for more than 3 minutes.

115 314

91
253

ø140
296

567

25
439

ø1
85

Max. stern thickness: 100mm (80mm recommended)

SX80/185T & SX100/185T External sternthruster assembly 1.1 - 2010 Version

2 1_0_3_2016
TECH INFO

Product Specifications Sheet

Maintenance
• DC motor: See User and Installation manuals for each model for more information.

Material specifications
• DC Motor: There are no hazardous materials in this product, ref material declaration.

Health and Safety

• Gearleg and DC motor: The Gearleg is shipped with gear oil - precautionary measures must
be taken . The gearleg and DC Motor is very powerful and precautionary measures must be
taken considering rotationing propeller and electrical installation. Gear oil is flameable and
and gasses from a fire is generally toxic.
• See Installation and User manual for more information.

This document may contain typographical errors and changes,

to which Sleipner Motor assumes no responsibility.

Sleipner Motor AS
P.O. Box 519,
N-1612 Fredrikstad, Norway
Tel: +47 69 30 00 60
Fax: +47 69 30 00 70
[email protected]
www.side-power.com
Version 1_0_3_2016