PIONEERING LOW

FUGITIVE EMISSION
TECHNOLOGIES
3 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

PIONEERING LOW
FUGITIVE EMISSION
TECHNOLOGIES

4
FUGITIVE EMISSION
MANAGEMENT

8
FUGITIVE EMISSION
CONTROL PACKINGS

14
LIVE LOADING

16
TECHNICAL
INFORMATION
4 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

FUGITIVE EMISSION
MANAGEMENT

SUSTAINABLE SOLUTIONS
Pacesetting innovations, uncompromising
OUR EXPERTISE
Burgmann Packings offers the complete We work together
quality and tailored solutions are our
strengths. Our quality products and reliable
range of low fugitive emission sealing
products – for both new valves and retrofits.
with industry
performance have earned us long-term
business relationships with international
When combined with an application
specific live-loading system they achieve
specialists to collect
corporations. We work together with leakage rates which are consistently lower data that enables
us to push the
industry specialists to collect data that than those required by legislation. Our low
enables us to push the performance of fugitive emission sealing products comply
our products further and further. We highly
appreciate the permanent dialog with our
to ISO 15848 (Parts 1 and 2), Clean Air Act,
API 622, API 624, VDI 2440 and TA Luft. performance of our
customers and our hands on approach
enables us to create cost-effective,
Valves, especially control valves, account
for approximately 60 % of the leakage
products further and
but sustainable solutions to meet our clients
most challenging enquires. We believe
loss in a plant. For processes containing
hazardous fluids conventional packings
further.
in sharing our knowledge with the aim to can be replaced with low emission sealing
make sealing technologies more efficient sets. Burgmann Packings fugitive emission
and support our clients’ effort to reduce control (FEC) sealing products are ideal to
their environmental impacts and increase increase plant safety and efficiency and to
the operating efficiency of plants worldwide. improve environmental protection. This is
why our “Best Available Technology” (BAT)
products are approved at leading end users
and OEM manufacturers.

Leak Detection and Repair

programs have shown to
be a key lever to reduce the
overall site emissions.
5 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

SOURCES OF
EMISSIONS Flanges Valves

Tanks

5%

10%

10%

Pumps

60%

10%

Relief Valves

EMISSION
STANDARDS

ISO 15848 Class A ≤1×10¯5

MESC SPE 77/312 Class A ≤1×10¯5

TA-Luft (VDI 2440) <250°C ≤1,64 ×10¯5

ISO 15848 Class B ≤10¯4

MESC SPE 77/312 Class B ≤1×10¯4

TA-Luft (VDI 2440) ≥250°C ≤1,64 ×10¯3

ISO 15848 Class C ≤10¯2

Leakage rates in mg/(s×m)

6 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

REDUCTION OF
EMISSIONS
Gg

20000

16000

12000

8000

4000

0 Year
90

92

94

96

98

00

02

04

06

08

10

12
19

19

19

19

19

20

20

20

20

20

20

Emissions NMVOC Gg (1000 tonnes) 20

SOURCES OF
FUGITIVE
EMISSIONS Ton / Year

1000
©The Sniffers

800

600

400

200

0 工厂

A B C D E F G

阀杆阀门 连接处 法兰
7 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

Life-cycle cost analysis

show that leakage
reduction of expensive
process media will also
improve the bottom line.

Surveys have shown STANDARDS AND REGULATIONS

Fugitive Emissions usually defined as gases
Evidence has been shown world-wide
that another key lever to reduce the overall
that the vast majority or vapors, which leak unintentionally from
industrial installations, have a significant
site emissions are Leak Detection and
Repair (LDAR) programs. These programs
of emissions arise impact on health, safety and environment.
Surveys have shown that the vast majority
produce transparency, where the biggest
leaks occur and where maintenance
from valves and of emissions arise from valves and flanges, activities should be focused on to produce
whereas the biggest issues arise from short-term, high impact results. The
flanges, whereas the valves. The good news is that with an Sniffers, a market leader in LDAR Fugitive

biggest issues arise integrated approach these emissions

can be significantly reduced. In Europe,
Emission Management Program has
completed more than 6.000 LDAR
from valves. for example, the Non Menthane Volatile
Organic Compounds (NMVOC) have
projects around the world over the past
25 years. Data from a Emission Reduction
been reduced from 1990 – 2011 by 57 %. Program in a European refinery show
This development has been fostered and that an annual reduction of emissions
accelerated by the legislative frameworks, by 75% can be achieved if an aligned
e.g. the European Directive Industrial and effective program has been
Emission Directive IED2010/75/EU and the implemented. Compliance however is
European Integrated Pollution Prevention only one benefit for the plant operator.
and Control (IPPC). The concept of Best The improvement of various HSE (Health,
Available Techniques (BAT) and the BREFs Safety and Environment) factors create
Reference documents have supported the measurable results. In addition, Life-cycle
end-user efforts to comply with stricter cost analysis show that leakage reduction of
emission standards, which have been expensive process media will also improve
transformed into national standards like the the bottom line. To learn more about these
TA Luft in Germany. Burgmann Packings opportunities browse our website or contact
actively contributes to this process by Burgmann Packings engineers. To learn
developing and manufacturing Fugitive more about LDAR services we recommend
Emission Control (FEC) products to to visit www.the-sniffers.com.
meet and exceed the lowest emission
regulations. Besides comprehensive
internal testing these products have been
certified by independent testing institutes to
comply with the latest emission standards
like ISO 15848, TA-Luft or API regulations.
8 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

FUGITIVE EMISSION
CONTROL PACKINGS

We have invented the mechanically

braided, self-lubricating packing in 1884.
Since then we have built a legacy of
pacesetting innovations, uncompromising
quality and tailored solutions for our global
customers. Today our braided packings
are the preferred choice for end-users and
OEM customers around the globe.

Beginning of the 21st century we were

among the first manufacturers, which
presented the first generation of Fugitive
Emission Control (FEC) sealing solutions.

Today we offer a complete range of low

fugitive emission sealing products – for
both new valves and retrofits. Off-the-
spool or tailored to your individual needs.
Combat-tested, certified and safe.

Burgmann Packings Fugitive Emission

Control Packings comply with world’s
strictest standards including TA LUFT,
ISO 15848, API 622, API 624, API 641,
API 607 and API 589.
9 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

BPG 7200 BPG 7250

PROPERTIES PROPERTIES
This packing is made from high grade impregnated non-woven State of the art sealing technology by combination of two non-
materials. The rings consist of aramid non-woven fibers with a woven materials. The end rings are made of non woven fibers with a
special PTFE impregnation and are suitable for Low Emission high carbon content. The intermediate rings consist of aramid non-
applications. woven fibers with special PTFE impregnation.

APPLICATIONS APPLICATIONS
The product is designed for use in valve applications. The product is designed for use in valve applications.

OPERATION PARAMETERS OPERATION PARAMETERS

Speed 2 m/s Speed 2 m/s

Temperature –200°C…+280°C Temperature –200°C…+280°C

PH Value 0…14 PH Value 0…14

Pressure 25 MPa Pressure 25 MPa

PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS

Media  ost chemicals* (solvents,

M Media Most chemicals* (solvents,
hydrocarbons, acids, lyes), hydrocarbons, acids, lyes),
alcohols, water, oils etc. alcohols, water, oils etc.

Certificates / Approvals TA Luft, ISO 15848 Certificates / Approvals TA Luft, ISO 15848

*Exceptions: highly concentrated acids and lyes, fluorine and some fluorine *Exceptions: highly concentrated acids and lyes, fluorine and some fluorine
compounds compounds

BENEFITS BENEFITS

→ Extremely low leakage rate → Ideally suited for control valves in fugitive
→ High cross sectional density and stability emission applications
→ Excellent low friction properties → Excellent resistance against gap extrusion
→ Suitable for applications which require high cleanliness
10 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

BPG 6552 BPG 6559

PROPERTIES PROPERTIES
BPG 6552 is braided from special expanded graphite yarn and This packing is braided from high purity expanded graphite material
over knitted with stainless steel wire. It contains a high temperature (C-content >98 %) and over knitted with Inconel wire. It contains a
impregnation as well as a corrosion inhibitor. Due to the high wire special high temperature impregnation and a corrosion inhibitor.
content it can be used without end rings.
APPLICATIONS
APPLICATIONS The product is designed for use in valve applications.
The product is designed for use in valve applications
OPERATION PARAMETERS
OPERATION PARAMETERS
Speed 2 m/s
Speed 2 m/s
Temperature –200°C … +450°C (most media)
Temperature –200°C … +450°C (most media) –200°C … +650°C (steam)
–200°C … +650°C (steam)
PH Value 0…14
PH Value 0…14
Pressure 45 MPa
Pressure 45 MPa

OPERATION PARAMETERS
PRODUCT SPECIFICATIONS
Media Hot water, steam, gases,
Media Hot water and steam, gases, oils, acids* and alkalis.
oils, acids* and alkalis.
Certificates / Approvals TA Luft, ISO 15848, API 622,
Certificates / Approvals TA Luft, ISO 15848, API 622 API 589 (fire safe), Chevron
and Texaco Test
*Exceptions: Strong oxidizing acids like sulphuric acid and nitric acid in high
concentrations. *Exceptions: strongly oxidising acids like sulphuric acid and nitric acid in high
concentrations

BENEFITS BENEFITS

→ High temperature and chemical resistance → High pressure resistance

→ Dense and resilient → Excellent performance for fugitive emission
→ Excellent sealing effect and constant elasticity and TA Luft valves
→ Good extrusion resistance at high pressures → Quick repair for all valve dimensions
11 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

BPG 7290 BPG 6500

PROPERTIES PROPERTIES
This packing is based on braided end rings of expanded pure This packing is braided from special expanded graphite foil material
graphite reinforced with carbon yarn corners. It has high density over knitted with a high tensile strength fiber. It contains a high
expanded graphite disks with permeation barrier and uniquely temperature impregnation as well as a corrosion inhibitor. This
impregnated high density expanded graphite adapter rings and low pressure-resistant braided packing has an excellent sealing effect
density expanded graphite sealing ring with special friction reducing and it fulfils fugitive emission and TA Luft requirements. It contains a
coating. high temperature lubricant which ensures low friction forces which
guarantees long service life in control valves.
APPLICATIONS
The product is designed for use in valve applications. APPLICATIONS
This packing can be used for on/off and control valve applications
OPERATION PARAMETERS in process industry. It is particularly suited for fugitive emission
applications.
Speed 2 m/s
OPERATION PARAMETERS
Temperature –200°C … +400°C (most media)
–200°C … +550°C (steam) Speed 2 m/s
PH Value 0…14 Temperature –200°C … +380°C
Pressure 30 MPa PH Value 0 … 14

Pressure 25 MPa
PRODUCT SPECIFICATIONS

Media Most chemicals (solvents, OPERATION PARAMETERS

hydrocarbons, acids, lyes),
steam, alcohols, oils etc. Media Hot water and steam, gases,
oils, acids* and alkalis.
Certificates / Approvals  A Luft, ISO 15848, API 622,
T
API 589 (fire safe) Certificates / Approvals TA-Luft, ISO 15848, API 622

*Exception: strongly oxidizing acids like sulphuric acid and nitric acid in high
concentrations.

BENEFITS BENEFITS

→ Up to 80 % lower friction compared to standard sealing → Special expanded graphite yarn
systems made of expanded graphite → High temperature and chemical resistance
→ Very low spindle torques at high temperature → Excellent sealing effect and constant elasticity
→ Low compression required due to optimized force deflection → Outer yarn reinforcement
→ Good extrusion resistance at higher pressures
12 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

BPG 6350 BPG 6225

PROPERTIES PROPERTIES
This packing has a carbon yarn core and is concentrically over This packing is a zebra braid made from aramid and PTFE yarns. It
braided with a dense PTFE yarn sleeve. In addition it contains a contains a special impregnation to enhance the cross-sectional
special impregnation to enhance the cross-sectional density of the density of the packing.
packing.
APPLICATIONS
APPLICATIONS This product is designed for the use in fugitive emission valves. It
This product is designed for the use in fugitive emission on/off and can be used for quick repair service as alternative to specialised TA
control valves. It is very flexible and retains sufficient gland pressure Luft packing sets. Due to its low friction it is also suitable for control
even after several temperature cycles without retightening. Ideal for valves. For ISO 15848 and frequent temperature cycling life-loading
ISO 15848 qualification. of the gland bolts is recommended.

OPERATION PARAMETERS OPERATION PARAMETERS

Speed 2 m/s Speed 2 m/s

Temperature –100°C … +280°C Temperature –100°C … +280°C

PH Value 0 … 14 PH Value 0 … 14

Pressure 30 MPa Pressure 30 MPa

PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS

Media Hot water, alkalis,organic Media Hot water, alkalis,organic

solvents, gases, oils, greases, solvents, gases, oils, greases,
medium concentration acids* medium concentration acids*
and lyes. and lyes.

Certificates / Approvals TA Luft, ISO 15848 Certificates / Approvals TA Luft, ISO 15848

*Exceptions: strongly oxidising acids such as sulphuric and nitric acid in high *Exceptions: strongly oxidising acids such as sulphuric and nitric acid in high
concentrations. concentrations.

BENEFITS BENEFITS

→ Very low leakage rates → Low leakage rates

→ Stays flexible even after temperature cycles → Emission certification
→ Good pressure and extrusion resistance → Good pressure and extrusion resistance
→ Low friction → Low friction
→ Easy handling → Suitable for quick repair service
13 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

KEY BENEFITS OF
FUGITIVE EMISSION
CONTROL PACKINGS

1 INCREASE PLANT SAFETY

2 PROTECT OUR ENVIRONMENT

3 COMPLIANCE WITH STRICTEST

EMISSION STANDARDS WORLD-WIDE

4 INCREASE PLANT EFFICIENCY

5 IMPROVE YOUR BOTTOM LINE

14 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

LIVE LOADING

Live loading provides a constant load

over the life of the FEC packing set and
therefore helps to maintain lowest leakage
levels. This greatly reduces or, in many
applications, helps to eliminate your need
for packing box adjustment and reduces
maintenance.

While many Burgmann Packings FEC

products can be used without live
loading systems, without compromising
product performance we recommend to
consider live loading for extreme service
applications.

In order to get your customized live

loading system please reach out to
Burgmann Packings Engineering team.
15 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

BPG 7900

PROPERTIES
Live loading system with a special arrangement of disc springs
combined with a stainless steel protection sleeve

APPLICATIONS
Valves, especially control valves, thermal cycling applications and
critical nuclear and low emission service

PRODUCT SPECIFICATIONS

Housing material All common stainless

steel materials incl. high
temperature alloys

Spring material 51cv4, other materials

upon request

VARIATIONS

BPG 7910 consisting of sleeve, springs

and bottom disc

BPG 7920 consisting of sleeve with

inner thread and springs

BPG 7930 consisting of sleeve with inner

thread, springs and bottom discs

INFLUENCE FACTORS

→ Pressure
→ Temperature
→ Medium
→ Sealing Set (compression rate)
→ Type of application (valve or mixer)
→ Dimensions (stuffing box, surrounding)
→ Compression Force (bolts, spring set)

BENEFITS

→ Defined compression by customised spring stack

→ Sleeve acts as protection for springs
→ Springs are guided by the sleeve and not by the bolts
→ Ideal compression easy to initiate by gap between
sleeve and housing
→ Gap indicates constitution of packing set
→ Extended service life for FEC packing set
16 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

TECHNICAL
INFORMATION

FUGITIVE EMISSIONMANAGEMENT VDI 2440 defines following maximum leak rates for harmful VOC’s
(Volatile Organic Compounds) for valves:
Burgmann Packings offers the complete range of low fugitive
emission sealing products – for both new valves and retrofits.
Temperature rate Measured leakage rate
Especially when combined with an application specific live-loading
system they achieve leakage rates which are consistently lower < 250°C ≤ 10¯4 mbar × l / (s × m)
than those required by legislation. This is why our “Best Available
Technology” (BAT) products are approved at leading end users and ≥ 250°C ≤ 10¯2  mbar × l / (s × m)
OEM manufacturers.

ENVIRONMENTAL PROTECTION Flange connections according to VDI 2200, VDI 2440 and TA-Luft
Valves, especially control valves, account for approximately 60 % According to TA-Luft and VDI 2440 flange connections must
of the leakage loss in a plant. For processes containing hazardous comply with maximum leakage rate of 10¯4 mbar × l (s × m) at test
fluids conventional packings can be replaced with low emission pressure of 1 bar. VDI 2200 defines the selection, calculation,
sealing sets. design and assembly of bolted flange connections as well as test
procedures and refers to VDI 2440 regarding permissible leak rates.
FUGITIVE EMISSION CONTROL SEALING VDI 2200 also defines criteria for “Blow-out” safety test for gaskets.
TECHNOLOGY HELPS TO: Aim of this Blow-out test is to avoid a sudden leakage through seal
› Increase plant safety burst.
› Protect our environment
› Increase plant efficiency and throughput CLEAN AIR ACT
› Improve your bottom line The Clean Air Act defines maximum leakage levels for flange
› Meet strictest emission standards worldwide connections, valves, pumps and agitators in the USA. Leakage test
has to be done according to EPA Method 21 (sniffing method) with
FUGITIVE EMISSION STANDARDS methane.

ISO 15848 API 622

ISO 15848 regulation describes measurement, test and qualification API 622, 2nd Edition is an international performance test for
procedures for fugitive emissions at industrial valves. packing materials considering several factors such as temperature,
The regulation is separated into 2 parts: pressure, thermal and mechanical cycling.
2nd Edition of API 622 defines 1510 mechanical cycles and 5
› ISO 15848-1: Classification system and qualification procedures thermal cycles. High temperature test shall be performed from
for type testing of valves ambient temperature to 260°C (500 °F) and pressures from 0 to
› ISO 15848-2: Specifies production acceptance test of valves for 600 psig (0 – 41 barg). Permissible leakage level is 100 ppm with test
valve manufacturer medium methane.

ISO 15848 categorises three tightness classes: API 624

First edition of API 624 is a type testing of rising stem valves
Grade Measured leakage rate Remarks equipped with graphite packing for Fugitive Emissions. The
standard covers rising and rising-rotating stem valves up to
A ≤ 10¯5 mg / (s × m) Typically achieved with 24" diameter and has to be performed at original valves. The
bellow seals or equivalent test procedure requires 310 mechanical cycles and three
spindle / shaft gasket system thermal cycles to 260°C (500 °F). Allowable leakage is 100 ppm
for swivel valves maximum. It requires that the tested valve packing be previously
tested according to API 622 and be suitable for use at service
B ≤ 10¯4 mg / (s × m) Typically achieved with temperatures –29°C to +538°C (–20 °F to 1000 °F).
packing system based on
PTFE or elastomer materials API 641
The API 641 test is one of three prevalent valve standards tests
C ≤ 10¯2 mg / (s × m) Typically achieved with
that evaluate fugitive emissions’ performance over an accelerated
packing on flexible graphite
life cycle. Of the three, the API 641 Standard is the most stringent
basis
type test for quarter-turn valves and covers different designs,
temperature ratings and sealing components. To pass this critical
TA-LUFT (VDI 2440) test, valves must meet the demanding criteria of maximum leakage
The German Fugitive Emission Control Legislation refers in TA- of 100 ppmv, while undergoing 610 cycles of the valve under
Luft regulation to VDI 2440 for defining leakage rates, test and extreme temperatures.
measuring methods.
17 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

BRAIDING TYPE

 1

 2

 3

 4

 5

3 
4-TRACK DIAGONAL BRAID
1  -TRACK SQUARE BRAID
2 (Interbraid / Cross-braid)
(Double diagonal braid) Smooth surface
Coarse surface Highly resistant to wear
Good elasticity high cross-sectional stability
Used for smaller square packing Highly dense braid structure
up to a nominal size of 6 mm Nominal packing dimension
between 10 and 80 mm 5 
GRAPHITE RINGS
2 3
 -TRACK DIAGONAL BRAID (Rings or ring segments made
(Interbraid / Cross-braid) 4 CONCENTRIC BRAID of compressed graphite foil or
Good cross-sectional stability (Braid-over-braid) expanded graphite material)
Dense but flexible braiding structure Fine, dense surface structure High cross-sectional density
Nominal packing dimension between Low mechanical resistance to wear Outstanding resistance to pressure,
5 and 12mm Rectangular or round shapes available temperature and chemicals
18 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

COMPRESSION
Leakage Contact Pressure

 1

 1
Leakage

 2  33  22  3

Radial Radial
Forces Forces

 4  4

1 Gland/Glandfollower Medium Pressure Medium Pressure

2 Housing
3 Spindle/Shaft
4 Packing

CUTTING AND
INSTALLATION

 1  2

 3  4

1 Cutting packing
at a 45° angle
2 First open axially,
then radially
3 Introduce the joint end first
4 Insert the packing
19 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

FUNDAMENTALS A diagonal cut helps to produce a better sealing effect than a

straight cut. When cutting packings which tend to fray adhesive
Control of fluid loss is essential to the successful operation of tape should be placed on appropriate side of the area to be cut,
mechanical equipment used in fluid handling. Various methods prior to cutting, in order to prevent fraying.
are utilized to control leakage at shafts, rods, or valve stems and
other functional parts of equipment requiring containment of Install each ring into the stuffing box, ensuring the ends are placed
liquids or gases. together and inserted first followed by the rest of the ring. The joints
The oldest, still most common and proven sealing solutions is of the individual packing rings should be staggered by 90°. The
compression packing. Compression packings seal all types of packing set should initially be tightly compressed, so that it will
fluids in valves, pumps, and other equipment in the process and mould and seat itself into the stuffing box. The gland nut should
service industries. Advancements in fiber and lubricant technology then be lossened and retightened to an appropriate setting.
have enabled high performance of packings in a wide range of
modern applications. INSTALLING DIE-FORMED RINGS
Made from relatively soft, pliant materials, compression or Die-formed rings with exact dimensions should be handled with
mechanical packings consist of a number of rings, which are care in order to retain the advantages that these rings offer. If the
inserted into the stuffing box between the rotating shaft or rings have to be opened to fit onto the shaft then the ring ends
reciprocating stem and the body of the pump or valve. should only be opened axially so far that the ring will fit over
Stuffing box packings are manufactured from yarns in braiding the shaft. Bending the ring radially deforms the ring and makes
machines using various braiding types depending on dimension installation more difficult.
and packing type. The type and area of application defines if the
packings are additionally manufactured with lubricants, fillers, and PRE-COMPRESSION OF PACKINGS
binding agents. The correct compression of packing set is dependent of the type
Because compression packings are specifically engineered of packing and application. If a torque wrench or a similar tool is
to solve each application in the broad range of fluid sealing, available the necessary gland pressure can be adjusted precisely.
they are provided in a wide array of configurations, materials,
and dimensions. PRE-COMPRESSION FOR PUMPS
Pump packings should be compressed with a gland pressure of
FUNCTION 1.05 to 2 times the media pressure. A minimum compression of 0.5
By tightening a follower or packing gland against the top or to 1.5 MPa is necessary.
outboard ring, pressure is transmitted to each individual packing
ring, which expands the rings radially against the side of the stuffing PRE-COMPRESSION FOR VALVES
box and the reciprocating stem or rotating shaft and effects a seal. Valve packings should be compressed with a gland pressure of 2
In addition, the applied compressive force closes the internal to 5 times the media pressure. A minimum compression of 5 MPa
structure of the packing ring material is necessary.

CONSTRUCTION “RUNNING-IN” OF NEW PACKINGS

The square braid is formed when yarns, rovings, ribbons, and other Pump packings are particularly susceptible to damage through
various materials, either alone or in combination, are processed high temperature during the run-in period. If the packing is running
on equipment where strands pass over and under strands running dry it will get too hot and the pump must be stopped. After a short
in the same direction. Resulting packings are usually supplied in cooling down period a regular leakage drip should appear and
a square cross-section, but rectangular sizes can also be braided the pump can be restarted. It may be necessary to repeat this
by this method. Depending on the braiding method, compression procedure several times until regular leakage appears.
packings can have different mechanical properties such as density
or flexibility. RECOMMENDED SURFACE

AVAILABILITY The recommended surface roughness for the stem or spindle

› 
Packings can be supplied on KG-creels, as pre-cut metre lengths should be Rz < 1.6 μm. For increased sealing effect and longer
or as pre-pressed / pre-formed rings (single or in ready to install service life the surface roughness can be reduced to Rz < 0.6 μm.
sealing sets) The permissible eccentricity on centrifugal pumps should be less
› 
Packings are available in standard sizes 3 to 25 mm than 0.001 of the shaft diameter. In the interest of reduced leakage
› 
Other shapes or sizes on request the eccentricity must not exceed 0.01 of the packing width. The
permissible extrusion gaps between shaft and gland or housing are
Packing size Weight 0.02 of the packing section. If the gaps are larger or the packing in
question is inclined to extrude, suitable anti-extrusion rings should
≤ 6.4 mm 1 kg / creel be fitted.
7 – 10 mm 2 kg / creel

11 – 12.7 mm 3 kg / creel

14 – 24 mm 5 kg / creel

≥ 25 mm 10 kg / creel

PACKING INSTALLATION

The ideal way to pack a stuffing box is with die-formed rings. Also
pre-cut lengths or self cut lengths can be used. If cutting lengths
from a creel a packing cutter can be used. By wrapping the cut
packing around the shaft or spindle it can be checked if the length
is correct. Alternatively the packing can be directly wound around
the shaft from the creel and cut accordingly.
20 BURGMANN PACKINGS Pioneering Low Fugitive Emission Technologies

STUFFING
BOX DETAILS

 10

 1

 4  7

 2
 5  8

 3  9

 5

 6

1 Adjustment travel for 5 Clearance max.

gland 20 to 30 % of 0.02 × packing width
packing set height 6 Stem / Shaft diameter
2 Min. insert depth for gland 7 Chamfer 2 × 30°
0.5 × packing width 8 Packing width
3 Packing set height 9 Stuffing box packing
4 Housing diameter 10 Live Loading sytem
Burgmann Sealing Materials Co., Ltd. Cixi
787-817 Ciyong Road
Cixi City 315302 Zhejiang Province, China
[email protected]
www.burgmannpackings.com

Burgmann Packings is
a member of the China
Sealing Assiciation

Burgmann Packings is
a member of the European
Sealing Assiciation e.V.