110 電路學 下 期末考

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

The Final Examination for Circuits

1
 L3 M  3 M 
1 Let     . Set all the initial conditions to zero, and find the loop
M L5   M 5 

equation in Figure 1.

Fig. 1
2 As shown in Figure 2, i1(0𝑖1 (0) = 1𝐴 , 𝑖3 (0) = 2𝐴 , 𝑣𝑐 (0) = 1𝑉 , find the loop
equation.

Fig. 2
3 As shown in the circuit of Figure 3, the effective value of the sine wave voltage source
𝑣𝑠 is 250V and the angular frequency is 800 rad/s. If the load 𝑍𝐿 can get the
maximum power transfer, find (1) 𝑍𝐿 , (2) the average power absorbed by the load.

Fig. 3
4 Please find the voltage across 40Ωresistor in Fig. 4
Fig. 4
5 Find the state representation of the following circuit, where 𝑋3 , 𝑋4 (inductor
currents), 𝑋1 , 𝑋2 (capacitor voltages)are assigned as states, and the output is the
voltage 𝑣𝑜 (𝑡).

Fig. 5
6 As shown circuit in Figure 6 (a), find the Y parameter. Use Figure 6 (a) to find the
output voltage 𝑣2 of Figure 6 (b).

Fig. 6 (a) Fig. 6 (b)


7 For the circuit shown in Fig. 7, set up the loop-current equation for the circuit, then
solve the current flowing in every branch. Draw the circuit and write all the branch
currents in polar form on the current.

Fig. 7

You might also like