Royal Crown

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ROYAL

Royal
Crochet pattern for a crown

Size: circumference about 46 cm or 18 inches

Materials:

Yarn: Light sport weight cotton or cotton blend, such as Premier Yarns Cotton Fair (52 % cotton, 48 %
acrylic)
Optional: metallic embroidery thread, held together with the yarn, such as DMC metallic
embroidery thread, color light silver.

Hook: 3.5 mm

Other: Stiffening media, such as Mod Podge Stiffy, starch spray, or sugar solution
Bling: to taste, e.g., glass or plastic beads size 10 or larger, e.g., 16 clear and 8 colored beads

Abbreviations: CH chain stitch; SL slip stitch; SC single crochet; DC double crochet; TC treble crochet

Gauge: Make a gauge swatch by crocheting rounds 1-5 (below) over 13 stitches (do not join in the
round). One repeat (12 s) will be about 5.8 cm or 2 ¼ inches wide.

Instructions:

Round 1. CH 96s, join in the round with SL. (You can adjust size by adding or subtracting multiples of
12 stitches.)
Round 2. CH 3s, DC 1 in each of the next 95 CH stitches of the previous round. Join with SL.
Round 3. Repeat round 2.

© 2015 Lotta Kiuru-Ribar Page 1 of 2 All Rights Reserved


ROYAL

Round 4. CH 5s, *skip 2, DC 1 in the third stitch of the previous round, CH 2s*, repeat *-* all the way
around. Join with SC to the 3rd stitch of the initial CH 5s.
Round 5. *DC 5 into the next DC of the previous round, SC into the second DC of the previous round*,
repeat *-* all the way around.
Round 6. SL3 (end up at the center top of the first cluster), *CH 7s, SC to the center of the next cluster
of the previous round*, repeat *-* all the way around. IF USING BEADS: after you pull the SC
loop through the center stitch of the cluster, thread a bead over the metallic thread loop.
Place the loop back on the hook and continue to crochet as usual. Total 16 beads on this
round.
Round 7. SL3 (end up at the center top of the first arch), *CH 4s, TC into the center of the next arch,
CH 7s, TC into the same center stitch, CH 4s, SC to the center of the next arch*, repeat *-*
all the way around. IF USING BEADS: after you pull the SC loop through the center stitch of
the arch, thread a bead over the metallic thread loop. Continue to crochet as usual. Total 8
beads on this round.
Round 8. *SC 4s, SL1 at the top of the TC of the previous round, SC 4s, into the leg of the last SC
stitch: **CH 3s, SL1, CH 5s, SL1, CH 3s, SL1**, SC 3s, SL1 at the top of the TC of the
previous round, SC 4s*, repeat *-* all the way around.
Round 9. Weave in ends. Place the crown over a suitable size cylinder or cone (I used a large roll of
paper towel covered with a plastic bag). Stiffen with a suitable media, such as Mod Podge
Stiffy, starch spray, or sugar solution. Allow to dry in place. Re-apply as needed. If you're not
concerned about a choking hazard (children under 3 yrs), you can add more beads or jewels
at this point by sewing or gluing.

© 2015 Lotta Kiuru-Ribar Page 2 of 2 All Rights Reserved

You might also like