Amt PTD PBX 0053 2 2 en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 208

Operating manual (Volume 3)

System management- Operation administration- Installer data


NeXspan C/S/L/D Call Manager

AMT/PTD/PBX/0053/2/2/EN
11/2006

AASTRA MATRA Telecom

Page 2

11/2006

AMT/PTD/PBX/0053/2/2/EN

CONTENTS

1.
1.1 1.2 1.3 1.4 1.5

ABOUT THIS DOCUMENT...............................................................................11


PURPOSE OF THIS DOCUMENT .............................................................................11 TARGET AUDIENCE OF THIS DOCUMENT ............................................................11 SCOPE OF THIS DOCUMENT ..................................................................................11 CONTENTS OF THIS DOCUMENT...........................................................................11 TERMINOLOGY.........................................................................................................11
TERMS AND EXPRESSIONS............................................................................................ 11 ABBREVIATIONS .............................................................................................................. 11

1.5.1 1.5.2

1.6 1.7

REFERENCE DOCUMENTS .....................................................................................12 REMINDER CONCERNING THE LAW ON INFORMATION TECHNOLOGY ..........12

2.
2.1

MENUS .............................................................................................................13
SYSTEM MANAGEMENT MENU ..............................................................................13
ON NEXSPAN C/S/L/D ...................................................................................................... 13 ON CALL MANAGER ........................................................................................................ 14 ON NEXSPAN C/S/L/D ...................................................................................................... 15 ON CALL MANAGER ........................................................................................................ 16 ON NEXSPAN C/S/L/D ...................................................................................................... 17 ON CALL MANAGER ........................................................................................................ 18 2.1.1 2.1.2

2.2

OPERATION ADMINISTRATION MENU ..................................................................15

2.2.1 2.2.2

2.3

INSTALLER DATA MENU.........................................................................................17

2.3.1 2.3.2

2.4

DATA MANAGEMENT (MENU 2) .............................................................................18

3.
3.1

SYSTEM MANAGEMENT (MENU 3) ...............................................................19


DATE AND TIME MANAGEMENT (MENU 3-1) ........................................................20
DATE AND TIME DEFINITION .......................................................................................... 20 PROGRAMMING A CHANGE OF TIME............................................................................ 21 CARDS IN THE NEXSPAN C/S/L/D RANGE (XL/XS/XC/XD) .......................................... 22 MANAGING CARDS ON A CALL MANAGER.................................................................. 54 RECORD ANNOUNCEMENTS (MENU 3-3-1) .................................................................. 55 SVF-BVF BOARD ACCESS CONFIGURATION (F6) (MENU 3-3-2) ............................... 57 GENERAL CHARACTERISTICS OF IVS IVB (F6) (MENU 3-3-3).................................... 58 3.1.1 3.1.2

3.2

CARD MANAGEMENT (MENU 3-2)..........................................................................22

3.2.1 3.2.2

3.3

SVF-BVF CONFIGURATION (MENU 3-3)................................................................55

3.3.1 3.3.2 3.3.3

3.4 3.5

TERMINAL MANAGEMENT (MENU 3-4)..................................................................59 PASSWORD MANAGEMENT (MENU 3-5) ...............................................................63

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 3

3.5.1 3.5.2

NEXSPAN C/S/L/D (XC/XS/XL/XD) AND CALL MANAGER ............................................63 PASSWORD MANAGEMENT FOR COMPACT FORMATS .............................................66

3.6 3.7 3.8

PARAMETER MANAGEMENT (MENU 3-6)............................................................. 68 MULTI-SITE MANAGEMENT (MENU 3-7) ............................................................... 70 SOFTWARE LOCK MANAGEMENT (MENU 3-8).................................................... 71
UNLOCK SA FUNCTIONS (MENU 3-8-1)..........................................................................71 DISPLAY SA FUNCTIONS (MENU 3-8-2) .........................................................................75 PARAMETER MANAGEMENT (MENU 3-9-1) ...................................................................77 RESET FLASH (MENU 3-9-2) ............................................................................................79

3.8.1 3.8.2

3.9

INTEGR. BUFFER MANAGEMENT (MENU 3-9) ..................................................... 77

3.9.1 3.9.2

4.
4.1 4.2

OPERATION ADMINISTRATION (MENU 4) ................................................... 80


ADMINISTRATION PARAMETERS (MENU 4-1) ..................................................... 81 OVERALL DISPLAY OF CHARGE COUNTERS (MENU 4-2).................................... 92
DISPLAY EXTENSION COUNTERS (MENU 4-2-1) ..........................................................93 DISPLAY TRUNK LINE COUNTERS (MENU 4-2-2) .........................................................94 DISPLAY TRUNK GROUP COUNTERS (MENU 4-2-3) ....................................................96 DISPLAY OPERATOR CONSOLE COUNTERS (MENU 4-2-4)........................................96 DISPLAY DEPARTMENT COUNTERS (MENU 4-2-5) ......................................................97 RESET COUNTERS (MENU 4-2-6) ....................................................................................97

4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6

4.3 4.4

CHARGING OF INDIVIDUAL SUBSCRIBERS (MENU 4-3) .................................... 99 LOGBOOK DISPLAY (MENU 4-4).......................................................................... 101
HARDWARE EVENTS RECORDED IN THE LOGBOOK ...............................................102 LOGICAL SECURITY BLOCKS .......................................................................................103

4.4.1 4.4.2

4.5 4.6

DELETE LOGBOOK (MENU 4-5) ........................................................................... 104 DISPLAY STATUSES (MENU 4-6) ......................................................................... 105
STATUS OF EXTENSIONS (MENU 4-6-1) ......................................................................106 STATUS OF EXTERNAL TRUNKS (MENU 4-6-2) ..........................................................110 STATUS OF DYNAMIC TRUNK GROUPS (MENU 4-6-3) ..............................................112 STATUS OF DATA LINKS (MENU 4-6-4)........................................................................113 MAINTENANCE STATUS (MENU 4-6-5) .........................................................................114 ROAMING STATUS OF MOBILES (MENU 4-6-6)...........................................................117 FILLING STATUS OF TABLES (MENU 4-6-7) ................................................................119 STATUS OF TCP TUNNEL CONNECTIONS (MENU 4-6-8) ...........................................120 STATUS OF INTEGRATED VOICE BOXES (MENU 4-6-9) ............................................120 DEFINE TRUNK GROUP OBSERVATION (MENU 4-7-1) ..............................................130 DISPLAY TRUNK GROUP OBSERVATION (MENU 4-7-2) ............................................131 BASE STATION OBSERVATION (MENU 4-7-3).............................................................132 BASE STATION TRUNK OBSERVATION (MENU 4-7-4) ...............................................133 MOBILE OBSERVATION (MENU 4-7-5)..........................................................................134 RESET WIRELESS OBSERVATION (MENU 4-7-6)........................................................134 INTEGRATED VOICE BOX PARAMETERS (MENU 4-7-7) ............................................135 CAC SERVER MONITORING (MENU 4-7-8) ...................................................................138

4.6.1 4.6.2 4.6.3 4.6.4 4.6.5 4.6.6 4.6.7 4.6.8 4.6.9

4.7

TRAFFIC OBSERVATION (MENU 4-7) .................................................................. 129

4.7.1 4.7.2 4.7.3 4.7.4 4.7.5 4.7.6 4.7.7 4.7.8

Page 4

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.8

STARTUP ADMINISTRATION (MENU 4-8) ............................................................143


SAVED START LOGBOOK ............................................................................................. 143 STARTUP TEST RESULT ............................................................................................... 144

4.8.1 4.8.2

5.
5.1

INSTALLER DATA (MENU 5) ........................................................................145


PROCESSOR ACCESS (MENU 5-1) ......................................................................146
DEBUG TOOLS (MENU 5-1-1) ........................................................................................ 146 FORMAT OF PAS FILES (MENU 5-1-1) ......................................................................... 148 DISPLAY OF PAS FILES (MENU 5-1-2) ......................................................................... 149 RESTART REQUEST (MENU 5-1-3) ............................................................................... 150 SERIAL PORT CONFIGURATION TRANSFER ............................................................. 153 PARALLEL PORT CONFIGURATION TRANSFER ....................................................... 154 5.1.1 5.1.2 5.1.3 5.1.4

5.2

CONFIGURATION TRANSFER (MENU 5-2) ..........................................................152

5.2.1 5.2.2

5.3 5.4

CONNECTION MANAGEMENT (MENU 5-3) NOT IN VALUES .............................155 IDENTIFICATION (MENU 5-4) ................................................................................157
SOFTWARE IDENTIFICATION (MENU 5-4-1) ................................................................ 158 HARDWARE IDENTIFICATION (MENU 5-4-2) ............................................................... 159 IDENTIFICATION OF MULTI-SITE SITES (MENU 5-4-3)............................................... 161 DISPLAY DIGITAL SET NAMES (MENU 5-4-4) ............................................................. 162 MANAGEMENT OF DIGITAL SET NAME (MENU 5-4-5) ............................................... 164 TONE AND ANNOUNCEMENT DEFINITION (MENU 5-5-1).......................................... 166 ANNOUNCEMENTS (MENU 5-5-2) ................................................................................. 173 DEFINITION OF SPOKEN LANGUAGES (MENU 5-5-3)................................................ 180 ALLOCATION OF TONES TO LANGUAGES (MENU 5-5-4) ......................................... 181 COMPANY/DEPARTMENT SPECIFIC TONES (MENU 5-5-4)....................................... 182 DEFINITION OF DIRECT ACCESS MESSAGES (MENU 5-5-6) .................................... 184 DISPLAY DEFINABLE TONES (MENU 5-5-7)................................................................ 185 EXTENNAL MUSIQUE LEVEL ADJUST. (MENU 5-5-8) ................................................ 186 SIGNALLING ACTIVATION (MENU 5.6.1)...................................................................... 187 NON ISDN SIGNALLING PARAMTERS (MENU 5-6-2).................................................. 190 ISDN SIGNALLING PARAMETERS (MENU 5.6.3)......................................................... 193 INITIALIZE A SIGNALLING TYPE (MENU 5-6-4) ........................................................... 196 RECORDING PARAMETERS (MENU 5-6-5) .................................................................. 197 IP SIGNALING PARAMETERS (MENU 5-6-6)................................................................ 198 INDIVIDUALIZED CONFIGURATION (MENU 5-7-1) ...................................................... 205 GLOBAL RESET (MENU 5-7-2) ...................................................................................... 207

5.4.1 5.4.2 5.4.3 5.4.4 5.4.5

5.5

TONE AND ANNOUNCEMENT DEFINITION (MENU 5-5) .....................................165

5.5.1 5.5.2 5.5.3 5.5.4 5.5.5 5.5.6 5.5.7 5.5.8

5.6

SIGNALLING MANAGEMENT (MENU 5-6) ............................................................187

5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 5.6.6

5.7

ALARM CONFIGURATION (MENU 5-7) .................................................................205

5.7.1 5.7.2

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 5

FIGURES

Figure 1: Menu 3 (System management - F6) .......................................................................................19 Figure 2: Menu 3 (System management - F5) .......................................................................................19 Figure 3: Time and date management...................................................................................................20 Figure 4: Date and time management (continued) ................................................................................21 Figure 5: Card management (F6) ..........................................................................................................22 Figure 6: Common boards management (XD).......................................................................................24 Figure 7: Common boards management (XD) (continued) ...................................................................24 Figure 8: Common boards management (XD) (continued) ...................................................................25 Figure 9: Common boards management (XD) (continued) ...................................................................25 Figure 10: Common boards management (XD) (continued) .................................................................26 Figure 11: Common boards management (XD) (continued) .................................................................26 Figure 12: Common boards management (XL) .....................................................................................27 Figure 13: Common boards management (XL) (continued) ..................................................................28 Figure 14: Common boards management (XL) (continued) ..................................................................28 Figure 15: Common boards management (XL) (continued) ..................................................................28 Figure 16: Common boards management (XL) (continued) ..................................................................29 Figure 17: Common boards management (XL) (continued) ..................................................................29 Figure 18: Card management (XS)........................................................................................................30 Figure 19: XD hardware and software configurations Migration (menu 3-2-2)...................................34 Figure 20: XL hardware and software configurations Migration (menu 3-2-2) ...................................36 Figure 21: XS hardware and software configurations Migration (menu 3-2-2)...................................38 Figure 22: XC hardware and software configurations Migration (menu 3-2-2)...................................41 Figure 23: Power supply /duplex management (menu 3-2-3)(continued) .............................................43 Figure 24: Power supply /duplex management (menu 3-2-3)(continued) .............................................44 Figure 25: Power supply /duplex management (menu 3-2-3)(continued) .............................................44 Figure 26: IP board parameters management (menu 3-2-3).................................................................49 Figure 27: IP card selection ...................................................................................................................50 Figure 28: ISDN board switches status (menu 3-2-5)............................................................................52 Figure 29: Managing Cards on a Call Manager....................................................................................54 Figure 30: SVF-BVF configuration (F6) .................................................................................................55 Figure 31: Record announcements........................................................................................................55 Figure 32: SVF-BVF card access configuration (F6) .............................................................................57 Figure 33: SVF-BVF card access configuration (F6) (continued)..........................................................57 Figure 34: Display IVS general characteristics (F6) (Menu 3-3-3) .......................................................58 Figure 35: Terminal management..........................................................................................................59 Figure 36: Password management on F5/F6 ........................................................................................63 Figure 37: Password management on F5/F6 ........................................................................................66 Figure 38: Menu 3-6 (Parameter management). ...................................................................................68 Figure 39: Menu 3-8 (Software lock management). ..............................................................................71 Figure 40: Selection of the SA function..................................................................................................71 Figure 41: Unlock hospital/hotel.............................................................................................................74

Page 6

11/2006

AMT/PTD/PBX/0053/2/2/EN

Figure 42: Display SA functions (F6)..................................................................................................... 75 Figure 43: Display SA functions (F6) (continued) ................................................................................. 75 Figure 44: Display SA functions (F6) (continued) ................................................................................. 76 Figure 45: Display SA functions (F6) (continued) ................................................................................. 76 Figure 46: Menu 3-9 (Integrated buffer management).......................................................................... 77 Figure 47: Integr. buffer parameter management (1)............................................................................ 77 Figure 48: Integr. buffer parameter management (2)............................................................................ 77 Figure 49: Reset flash ........................................................................................................................... 79 Figure 50: Administration password ...................................................................................................... 80 Figure 51: Menu 4 (Operation administration). ..................................................................................... 80 Figure 52: Menu 4-1 (Administration parameters). ............................................................................... 81 Figure 53: Administration parameters (continued) ................................................................................ 83 Figure 54: Administration parameters (continued) ................................................................................ 85 Figure 55: Administration parameters (continued) ................................................................................ 87 Figure 56: Administration parameters (continued) ................................................................................ 88 Figure 57: Administration parameters (continued - alarm validation on F6) ......................................... 89 Figure 58: Administration parameters (continued - alarm validation on F5) ......................................... 90 Figure 59 : Administration parameters (site degradation state) ............................................................ 91 Figure 59: Overall charge data (F6) ...................................................................................................... 92 Figure 60: Overall charge data (F5) ...................................................................................................... 92 Figure 61: Display extension meters ..................................................................................................... 93 Figure 62: Extension counters............................................................................................................... 93 Figure 63: Display of trunk line counters (F6) ....................................................................................... 95 Figure 64: Display trunk group counters (F6)........................................................................................ 96 Figure 65: Display operator console counters....................................................................................... 96 Figure 66: Display department counters ............................................................................................... 97 Figure 67: Selection of counters to be reset ......................................................................................... 97 Figure 68: Reset counter password ...................................................................................................... 98 Figure 69: Message indicating that the counters have been reset ....................................................... 98 Figure 70: Menu 4-3 (Directory number selection) ............................................................................... 99 Figure 71: Charging subscriber 28........................................................................................................ 99 Figure 72: Menu 4-4 (Logbook)........................................................................................................... 101 Figure 73: Password for deleting the logbook..................................................................................... 104 Figure 74: Delete logbook ................................................................................................................... 104 Figure 75: Display statuses (F6) ......................................................................................................... 105 Figure 76: Display statuses (F5) ......................................................................................................... 105 Figure 77: Status of extensions........................................................................................................... 106 Figure 78: Selection of a status to monitor.......................................................................................... 106 Figure 79: Display extensions (F6) (any status).................................................................................. 107 Figure 80: IP subscribers status - selection ........................................................................................ 107 Figure 81: IP subscribers status - display non-connected applicative sessions................................. 108 Figure 82: IP subscribers status - display connected applicative sessions ........................................ 109 Figure 83: Selection of a status to monitor.......................................................................................... 110 Figure 84: External trunk lines on the trunk group .............................................................................. 111 Figure 85: Selection of a status to monitor.......................................................................................... 112 Figure 86: Status of dynamic trunk groups ......................................................................................... 112 Figure 87: Status of data links (F6) ..................................................................................................... 113

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 7

Figure 88: Status of data links (F6) (continued)...................................................................................113 Figure 89: Selection of a status to monitor ..........................................................................................114 Figure 90: Display any maintenance status .........................................................................................116 Figure 91: Display any maintenance status (continued)......................................................................116 Figure 92: Mobile localisation status....................................................................................................117 Figure 93: Mobile localisation (menu 4-6-6-1) .....................................................................................117 Figure 94: Mobile localisation (cell basis) (menu 4-6-6-2)...................................................................118 Figure 95: Mobiles localised on cell xxxxxx .........................................................................................118 Figure 96: Filling status of tables .........................................................................................................119 Figure 97: Filling status of tables (cont.) ..............................................................................................119 Figure 98: Status of TCP tunnel connections ......................................................................................120 Figure 99: Status of integrated voice boxes.........................................................................................120 Figure 100: Overall view of voice mailboxes........................................................................................121 Figure 101: Displaying voice mailboxes from a directory number .......................................................121 Figure 102: Displaying voice mailboxes belonging to the same service class ....................................122 Figure 103: Displaying voice mailboxes depending on operating mode .............................................122 Figure 104: Displaying voice mailboxes by status ...............................................................................123 Figure 105: Selecting a voice mailbox .................................................................................................125 Figure 106: Displaying voice mailbox messages.................................................................................125 Figure 107: View messages involved in audit......................................................................................126 Figure 108: Display general characteristics.........................................................................................127 Figure 109: Displaying voicemail busy statistics..................................................................................128 Figure 110: Displaying voicemail busy statistics (cont.) ......................................................................128 Figure 111: Traffic observation (F6).....................................................................................................129 Figure 112: Traffic observation (F5).....................................................................................................129 Figure 113: Define trunk group observation ........................................................................................130 Figure 114: Display trunk group observation .......................................................................................131 Figure 115: Observation of trunk group table ......................................................................................131 Figure 116: Base station observation ..................................................................................................132 Figure 117: Base station observation table..........................................................................................132 Figure 118: Selection of trunk group to be observed...........................................................................133 Figure 119: Observation of the selected trunk group...........................................................................133 Figure 120: Mobile observation table...................................................................................................134 Figure 121: Rest wireless observation.................................................................................................134 Figure 122: Integrated voice box parameters ......................................................................................135 Figure 123: Audit start-up criteria.........................................................................................................135 Figure 124: Message deletion criteria..................................................................................................136 Figure 125: Reset voice mailbox flash .................................................................................................137 Figure 126: CAC server monitoring .....................................................................................................138 Figure 127: Display flows towards other centres .................................................................................138 Figure 128: Display flows by CAC class ..............................................................................................139 Figure 129: Reset the centre counters.................................................................................................140 Figure 130: Reset class counters ........................................................................................................141 Figure 131: CAC servers status...........................................................................................................142 Figure 132: Start-up administration......................................................................................................143 Figure 133: Saved start logbook ..........................................................................................................143 Figure 134: Start-up test result ............................................................................................................144

Page 8

11/2006

AMT/PTD/PBX/0053/2/2/EN

Figure 135: Password for access to installer data .............................................................................. 145 Figure 136: Installer data (F6) ............................................................................................................. 145 Figure 137: Installer data (F5) ............................................................................................................. 145 Figure 138: Menu 5-1 (Processor access). ......................................................................................... 146 Figure 139 : Debug tool Sending a PING request (F6).................................................................... 146 Figure 140 : Moyen de Debug Rception dune requte PING (F6)................................................ 147 Figure 141: Format of PAS files .......................................................................................................... 148 Figure 142: Display of PAS files.......................................................................................................... 149 Figure 143: Restart request................................................................................................................. 150 Figure 144: Menu 5-2 (Configuration transfer).................................................................................... 152 Figure 145: Serial port configuration transfer...................................................................................... 153 Figure 146: Parallel transfer of the configuration ................................................................................ 154 Figure 147: Menu 5-3 (Connection management) .............................................................................. 155 Figure 148: Identification (F5) ............................................................................................................. 157 Figure 149: Identification (F6) ............................................................................................................. 157 Figure 150: Software identification (F5) .............................................................................................. 158 Figure 151: Software identification (XD) ............................................................................................. 158 Figure 152: Software identification (continued) (XD) .......................................................................... 158 Figure 153: Hardware identification (F6)............................................................................................. 159 Figure 154: Hardware identification (example of an XL cabinet) ........................................................ 159 Figure 155: Hardware identification (example of an XL cabinet) ........................................................ 160 Figure 156: Identification of multi-site sites ......................................................................................... 161 Figure 157: Display digital set names ................................................................................................. 162 Figure 158: Display digital set names (continued) .............................................................................. 162 Figure 159: Display digital set names (continued) .............................................................................. 163 Figure 160: Display digital set names (continued) .............................................................................. 163 Figure 161: Display digital set names (end)........................................................................................ 163 Figure 162: Modification of digital set names...................................................................................... 164 Figure 163: Menu 5-5 (Tone and announcement definition - F6). ...................................................... 165 Figure 164: Menu 5-5 (Tone and announcement definition - F5). ...................................................... 166 Figure 165: Selection of tone type....................................................................................................... 166 Figure 166: Normal dial tone ............................................................................................................... 170 Figure 167: Busy tone ......................................................................................................................... 172 Figure 168: Call accepted tone ........................................................................................................... 172 Figure 169: Menu 5-5-2 (Announcements - F6).................................................................................. 173 Figure 170: Summary of voice cards installed in F6 PBXs ................................................................. 173 Figure 171: View announcements (F6) ............................................................................................... 174 Figure 172: Announcement distribution .............................................................................................. 175 Figure 173: Observe counters (F6) ..................................................................................................... 176 Figure 174: Reset counters (F6) ......................................................................................................... 177 Figure 175: Record announcements................................................................................................... 178 Figure 176: Definition of spoken languages........................................................................................ 180 Figure 177: Allocation of tones to languages ...................................................................................... 181 Figure 178: Allocation of tones to languages (continued)................................................................... 181 Figure 179: Specific tone (single-company)........................................................................................ 182 Figure 180: Company/department specific tones................................................................................ 183 Figure 181: Company/department specific tones (cont.) .................................................................... 183

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 9

Figure 182: Definition of direct access messages ...............................................................................184 Figure 183: Display of definable tones in single-company configuration ............................................185 Figure 184: Display of definable tones in multi-company configuration ..............................................185 Figure 185: Adjust external music level (F6)........................................................................................186 Figure 186: Signalling management (F6).............................................................................................187 Figure 187: Signalling management (F5).............................................................................................187 Figure 188: Signalling activation ..........................................................................................................187 Figure 189: Signalling for digital TRK ..................................................................................................188 Figure 190: Signalling for analogue TRK .............................................................................................188 Figure 191: Signalling for tie-line .........................................................................................................189 Figure 192: Signalling for ISDN:T0 ......................................................................................................189 Figure 193: Signalling for ISDN:T2 ......................................................................................................189 Figure 194: Signalling for voice IP .......................................................................................................190 Figure 195: Non ISDN signalling parameters ......................................................................................190 Figure 196: Non ISDN signalling parameters (continued) ...................................................................191 Figure 197: Non ISDN signalling parameters (continued) ...................................................................191 Figure 198: Non ISDN signalling parameters (end).............................................................................192 Figure 199: ISDN signalling parameters ..............................................................................................193 Figure 200: ISDN signalling parameters (continued)...........................................................................194 Figure 201: ISDN signalling parameters (continued)...........................................................................194 Figure 202: ISDN signalling parameters (continued)...........................................................................195 Figure 203: Initialise a signalling type ..................................................................................................196 Figure 204: R2 Standard recorder parameters....................................................................................197 Figure 205: IP signalling parameters (F6)............................................................................................198 Figure 206: IP signalling parameters (F5)............................................................................................199 Figure 207: Alarm configuration...........................................................................................................205 Figure 208: Configure the alarms: selection ........................................................................................205 Figure 209: Alarm configuration...........................................................................................................207 Figure 210: Configure the alarms: global reset....................................................................................207

Page 10

11/2006

AMT/PTD/PBX/0053/2/2/EN

1.

ABOUT THIS DOCUMENT

1.1

PURPOSE OF THIS DOCUMENT


This document describes the MMCs of the PBX from software release 4.2, with the exception of the MMCs relating to data transmission, which are dealt with in a separate manual.

1.2

TARGET AUDIENCE OF THIS DOCUMENT


This document is intended for installation technicians who configure the PBX and implement the telephone features introduced by this software release.

1.3

SCOPE OF THIS DOCUMENT


This document applies to the NeXspan C/S/L/D PBXs and Call Manager as of software release R4.2.

1.4

CONTENTS OF THIS DOCUMENT


This manual describes all the means available to the operator for management of the NeXspan C/S/L/D PBXs and Call Manager from an operating terminal. All Man-Machine Commands (MMCs) described in this manual enable you to operate and manage the NeXspan C/S/L/D PBXs and Call Manager. This manual is composed of chapters ordered according to the tree structure of the MMCs as presented on the screen of the operating console.

1.5
1.5.1

TERMINOLOGY
TERMS AND EXPRESSIONS
F1 F2 PBX range comprising M6501 L/R IP PBX PBX range comprising M6504 IP PBX, M6504 L IP PBX and M6540 IP PBX

F5 Software application (Call Manager) F6 PBX range comprising NeXspan C (XC), NeXspan S (XS), NeXspan L (XL) and NeXspan D (XD)

1.5.2

ABBREVIATIONS
Not applicable.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 11

1.6

REFERENCE DOCUMENTS
The information contained in this manual refers to the following documents:

1.7

NeXspan C/S/L/D Range Installation and Maintenance Manual AMT/PTD/PBX/0058/1 NeXspan Communication Server Installation and Configuration Guide AMT/PTD/PBX/0029/1 Telephone sets manual AMT/PTD/TR/0001/1

REMINDER CONCERNING THE LAW ON INFORMATION TECHNOLOGY


The user is reminded that commissioning PBXs in the workplace must comply with the recommendations of the IT law in force. The user's attention is also drawn to any clauses applicable in laws relating to the confidentiality of calls transmitted by means of telecommunications.

Page 12

11/2006

AMT/PTD/PBX/0053/2/2/EN

2.
2.1
2.1.1

MENUS

SYSTEM MANAGEMENT MENU


ON NEXSPAN C/S/L/D
PBX MANAGEMENT 1 - TELEPHONY MANAGEMENT 2 - DATA MANAGEMENT 3 - SYSTEM MANAGEMENT 4 - OPERATION ADMINISTRATION 5 - INSTALLER DATA SYSTEM MANAGEMENT 1 - DATE AND TIME MANAGEMENT 2 - CARD MANAGEMENT 3.- SVF-BVF CONFIGURATION 4 - TERMINAL MANAGEMENT 5 - PASSWORD MANAGEMENT 6 - PARAMETER MANAGEMENT 7 - MULTISITE MANAGEMENT 8 - SOFTWARE LOCK MANAGEMENT 9 - INTEGRAT. BUFFER MANAGEMENT MANAGEMENT OF DATE AND TIME CARD MANAGEMENT 1 - COMMON BOARDS MANAGEMENT 2 - MOTHER BOARD MANAGEMENT - MIGRATION 3 - POWER SUPPLY / DUPLEX MANAGEMENT 4 - IP BOARD PARAMETERS MANAGEMENT 5- ISDN BOARD SWITCHES STATUS SVF BVF CONFIGURATION 1 - SVF-BVF: RECORD ANNOUNCEMENTS 2 - SVF-BVF BOARD ACCESS CONFIGURATION TERMINAL MANAGEMENT MANAGEMENT PASSWORD PARAMETER MANAGEMENT MULTI-SITE MANAGEMENT 1 - DEFINITION OF CENTERS AND SITES 2 - MESSAGE ROUTING 3 - CIRCUIT MANAGEMENT 4 - PERMANENT LINK MANAGEMENT 5 - RESOURCES ON OTHER SITES 6 - SITE CONFIGURATION TOOL 7 - VOICE OVER IP PARAMETERS Menu 3-1 Menu 3-2

Password "INSTA"

Menu 3-3

Menu 3-4 Menu 3-5 Menu 3-6 Menu 3-7

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 13

SOFTWARE LOCK MANAGEMENT 1 - UNLOCK SA FUNCTIONS 2 - DISPLAY SA FUNCTIONS INTEGR. BUFFER MANAGEMENT 1 - PARAMETER MANAGEMENT 2 - RESET FLASH

Menu 3-8

Menu 3-9

2.1.2

ON CALL MANAGER
PBX MANAGEMENT 1 - TELEPHONY MANAGEMENT 2 - DATA MANAGEMENT 3 - SYSTEM MANAGEMENT 4 - OPERATION ADMINISTRATION 5 - INSTALLER DATA SYSTEM MANAGEMENT 1 - DATE AND TIME MANAGEMENT 2 - CARD MANAGEMENT 3 - PASSWORD MANAGEMENT 4 - PARAMETER MANAGEMENT 5 - MULTI-SITE MANAGEMENT 6 - SOFTWARE LOCK MANAGEMENT MANAGEMENT OF DATE AND TIME CARD MANAGEMENT MANAGEMENT PASSWORD PARAMETER MANAGEMENT MULTI-SITE MANAGEMENT 1 - DEFINITION OF CENTERS AND SITES 2 - MESSAGE ROUTING 3 - RESOURCES ON OTHER SITES 4 - SITE CONFIGURATION TOOL 5 - VOICE OVER IP PARAMETERS SOFTWARE LOCK MANAGEMENT 1 - UNLOCK SA FUNCTIONS 2 - DISPLAY SA FUNCTIONS Menu 3-1 Menu 3-2 Menu 3-3 Menu 3-4 Menu 3-5

Password "INSTA"

Menu 3-6

Page 14

11/2006

AMT/PTD/PBX/0053/2/2/EN

2.2
2.2.1

OPERATION ADMINISTRATION MENU


ON NEXSPAN C/S/L/D
PBX MANAGEMENT 1 - TELEPHONY MANAGEMENT 2 - DATA MANAGEMENT 3 - SYSTEM MANAGEMENT 4 - OPERATION ADMINISTRATION 5 - INSTALLER DATA OPERATION ADMINISTRATION 1 - ADMINISTRATION PARAMETERS 2 - OVERALL DISPLAY OF CHARGE COUNTERS 3 - CHARGING OF INDIVIDUAL SUBSCRIBERS 4 - LOGBOOK DISPLAY 5 - DELETE LOGBOOK 6 - DISPLAY STATUSES 7 - TRAFFIC OBSERVATION ADMINISTRATION PARAMETERS OVERALL DISPLAY OF CHARGE COUNTERS 1 - DISPLAY EXTENSION COUNTERS 2 - DISPLAY TRUNK LINE COUNTERS 3 - DISPLAY TRUNK GROUP COUNTERS 4 - DISPLAY OPERATOR CONSOLE COUNTERS 5 - DISPLAY DEPARTMENT COUNTERS 6 - RESET COUNTERS CHARGING OF INDIVIDUAL SUBSCRIBERS LOGBOOK DELETE LOGBOOK DISPLAY STATUSES 1 - STATUS OF EXTENSIONS 2 - STATUS OF EXTERNAL TRUNKS 3 - STATUS OF DYNAMIC TRUNK GROUPS 4 - STATUS OF DATA LINKS 5 - MAINTENANCE STATUS 6 - ROAMING STATUS OF MOBILES 7 - FILLING STATUS OF TABLES 8 - STATUS OF TUNNEL TCP CONNECTIONS 9 - STATUS OF INTEGRATED VOICE BOXES TRAFFIC OBSERVATION 1 - DEFINE TRUNK GROUP OBSERVATION 2 - DISPLAY TRUNK GROUP OBSERVATION 3 - BASE STATION OBSERVATION 4 - BASE STATION TRUNK OBSERVATION 5 - MOBILE OBSERVATION 6 - RESET WIRELESS OBSERVATION 7 - INTEGRATED VOICE BOX PARAMETERS 8 - CAC SERVER MONITORING Menu 4-1 Menu 4-2

Password "INSTA"

Menu 4-3 Menu 4-4 Menu 4-5 Menu 4-6

Menu 4-7

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 15

2.2.2

ON CALL MANAGER
PBX MANAGEMENT 1 - TELEPHONY MANAGEMENT 2 - DATA MANAGEMENT 3 - SYSTEM MANAGEMENT 4 - OPERATION ADMINISTRATION 5 - INSTALLER DATA OPERATION ADMINISTRATION 1 - ADMINISTRATION PARAMETERS 2 - OVERALL DISPLAY OF CHARGE COUNTERS 3 - CHARGING OF INDIVIDUAL SUBSCRIBERS 4 - LOGBOOK DISPLAY 5 - DELETE LOGBOOK 6 - DISPLAY STATUSES 7 - TRAFFIC OBSERVATION ADMINISTRATION PARAMETERS OVERALL DISPLAY OF CHARGE COUNTERS 1 - DISPLAY EXTENSION COUNTERS 2 - DISPLAY DEPARTMENT COUNTERS 3 - RESET COUNTERS CHARGING OF INDIVIDUAL SUBSCRIBERS LOGBOOK DELETE LOGBOOK DISPLAY STATUSES 1 - STATUS OF EXTENSIONS 2 - STATUS OF DATA LINKS 3 - MAINTENANCE STATUS 4 - ROAMING STATUS OF MOBILES 5 - FILLING STATUS OF TABLES 6 - STATUS OF TUNNEL TCP CONNECTIONS TRAFFIC OBSERVATION 1 - MOBILE OBSERVATION 2 - RESET WIRELESS OBSERVATION 3 - CAC SERVER MONITORING Menu 4-1 Menu 4-2

Password "INSTA"

Menu 4-3 Menu 4-4 Menu 4-5 Menu 4-6

Menu 4-7

Page 16

11/2006

AMT/PTD/PBX/0053/2/2/EN

2.3
2.3.1

INSTALLER DATA MENU


ON NEXSPAN C/S/L/D
PBX MANAGEMENT 1 - TELEPHONY MANAGEMENT 2 - DATA MANAGEMENT 3 - SYSTEM MANAGEMENT 4 - OPERATION ADMINISTRATION 5 - INSTALLER DATA INSTALLER DATA 1 - PROCESSOR ACCESS 2 - CONFIGURATION TRANSFER 3 - CONNECTION MANAGEMENT 4 - IDENTIFICATION 5 - TONE AND ANNOUNCEMENT DEFINITION 6 - SIGNALLING MANAGEMENT 7 - ALARM CONFIGURATION PROCESSOR ACCESS 1 - DEBUG TOOLS 2 - FORMAT OF PAS FILES 3 - DISPLAY OF PAS FILES 4 - RESTART REQUEST CONFIGURATION TRANSFER CONNECTION MANAGEMENT IDENTIFICATION 1 - SOFTWARE IDENTIFICATION 2 - HARDWARE IDENTIFICATION 3 - IDENTIFICATION OF MULTISITE SITES 4 - DISPLAY DIGITAL SET NAMES 5 - MANAGEMENT OF DIGITAL SET NAMES TONE AND ANNOUNCEMENT DEFINITION 1 - TONE DEFINITION 2 - ANNOUNCEMENT MESSAGES ON SVF-BVF 3 - DEFINITION OF SPOKEN LANGUAGES 4 - ALLOCATION OF TONES TO LANGUAGES 5 - COMPANY/DEPARTMENT SPECIFIC TONES 6 - DEFINITION OF DIRECT ACCESS MESSAGES 7 - DISPLAY DEFINABLE TONES 8 - EXTENNAL MUSIQUE LEVEL ADJUST. SIGNALlING MANAGEMENT 1 - SIGNALLING ACTIVATION 2 - NON ISDN SIGNALLING PARAMETERS 3 - ISDN SIGNALLING PARAMETERS 4 - INITIALIZE A SIGNALLING TYPE 5 - RECORDING PARAMETERS 6 - IP SIGNALLING PARAMETERS ALARM CONFIGURATION 1 - INDIVIDUALIZED CONFIGURATION 2 - GLOBAL RESET Menu 5-1

Password "INSTA"

Menu 5-2 Menu 5-3 Menu 5-4

Menu 5-5

Menu 5-6

Menu 5-7

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 17

2.3.2

ON CALL MANAGER
PBX MANAGEMENT 1 - TELEPHONY MANAGEMENT 2 - DATA MANAGEMENT 3 - SYSTEM MANAGEMENT 4 - OPERATION ADMINISTRATION 5 - INSTALLER DATA INSTALLER DATA 1 - PROCESSOR ACCESS 2 - IDENTIFICATION 3 - TONE AND ANNOUNCEMENT DEFINITION 4 - SIGNALLING MANAGEMENT 5 - ALARM CONFIGURATION PROCESSOR ACCESS 1 - FORMAT OF PAS FILES 2 - DISPLAY OF PAS FILES 3 - RESTART REQUEST IDENTIFICATION 1 - SOFTWARE IDENTIFICATION 2 - IDENTIFICATION OF MULTISITE SITES 3 - DISPLAY DIGITAL SET NAMES 4 - MANAGEMENT OF DIGITAL SET NAMES TONE AND ANNOUNCEMENT DEFINITION 1 - TONE DEFINITION 2 - DEFINITION OF SPOKEN LANGUAGES 3 - ALLOCATION OF TONES TO LANGUAGES 4 - COMPANY/DEPARTMENT SPECIFIC TONES 5 - DEFINITION OF DIRECT ACCESS MESSAGES 6 - DISPLAY DEFINABLE TONES SIGNALlING MANAGEMENT 1 - SIGNALLING ACTIVATION 2 - IP SIGNALLING PARAMETERS ALARM CONFIGURATION 1 - INDIVIDUALIZED CONFIGURATION 2 - GLOBAL RESET Menu 5-1

Password "INSTA"

Menu 5-2

Menu 5-3

Menu 5-4

Menu 5-5

2.4

DATA MANAGEMENT (MENU 2)


Since the data management functions are of great importance, they are not described in this manual, and are dealt with in a separate manual, reference AMT_PTD_PBX_0055*.

Page 18

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.

SYSTEM MANAGEMENT (MENU 3)

For the Call Manager (F5): Menu 3 (System management) levels 3 (Configuration and recording), 4 (Terminal management), and 9 (Integr. buffer management) are not available. SYSTEM MANAGEMENT 1 DATE AND TIME MANAGEMENT 2 CARD MANAGEMENT 3.SVF-BVF CONFIGURATION 4 TERMINAL MANAGEMENT 5 PASSWORD MANAGEMENT 6 PARAMETER MANAGEMENT 7 MULTI-SITE MANAGEMENT 8 SOFTWARE LOCK MANAGEMENT 9 INTEGRAT. BUFFER MANAGEMENT ENTER YOUR CHOICE ---------------------------------------Figure 1: Menu 3 (System management - F6) SYSTEM MANAGEMENT 1 2 3 4 5 6 DATE AND TIME MANAGEMENT CARD MANAGEMENT PASSWORD MANAGEMENT PARAMETER MANAGEMENT MULTI-SITE MANAGEMENT SOFTWARE LOCK MANAGEMENT ENTER YOUR CHOICE ---------------------------------------Figure 2: Menu 3 (System management - F5) . .

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 19

3.1

DATE AND TIME MANAGEMENT (MENU 3-1)


For the Call Manager (F5): Menu 3-1 (Date and time management).

3.1.1

DATE AND TIME DEFINITION


MANAGEMENT OF DATE AND TIME PRESENT TIME AND DATE - TIME (format hh mm ss) - DATE (format dd mm yyyy) NEXT PROGRAMMED TIME CHANGE 15 51 46 30 06 2003 NO

---------------------------------------Figure 3: Time and date management TIME (FORMAT HH MM SS) Enter the hour (hh), minutes (mm) and seconds (ss) using 2 digits for each value. DATE (FORMAT DD MM YYYY) Enter the day (dd) and month (mm), using 2 digits for each value, and the year (yyyy), using 4 digits. NEXT PROGRAMMED TIME CHANGE NO YES

This menu is used to switch to day light-saving time or to local standard time on the requested date: this avoids having to carry out these changes on the customer site on the day in question. When you select this option, 3 other fields are displayed (see the section below). Note : In this release, the customer can make the change himself using the interactive menu on an attendant console or a digital set declared as a maintenance set.

Page 20

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.1.2

PROGRAMMING A CHANGE OF TIME


MANAGEMENT OF DATE AND TIME PRESENT TIME AND DATE - TIME (format hh mm ss) - DATE (format dd mm yyyy) NEXT - on - At - IT PROGRAMMED TIME CHANGE YES (date format dd mm) (time format hh mm) WILL BE (time format hh mm) 15 53 14 30 06 2003 ..... ..... .....

---------------------------------------Figure 4: Date and time management (continued) ON (DATE FORMAT DD MM) Enter the date of the change: the day (dd) and month (mm), using 2 digits for each value. AT (TIME FORMAT HH MM) Enter the time of the change: the hour (hh) and minutes (mm), using 2 digits for each value. IT WILL BE (TIME FORMAT HH MM) Enter the desired time for the change: the hour (hh) and minutes (mm), using 2 digits for each value. Note : The date and time can be updated on an attendant console or on a 520 or 640 digital set declared as a maintenance set in its extension characteristics. In menu 1-7-2 (Miscellaneous Parameters), select YES for date and time management. Programming on telephone sets is as follows: FUNCT. SERVER MORE SYSTEM MANAGEMENT ACCESS DATE and TIME. The date and time are updated on the sets after any operation (Example: offhook/on-hook), after passing 8 p.m. or midnight, by unplugging or plugging in the sets following an automatic reset.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 21

3.2

CARD MANAGEMENT (MENU 3-2)


For the Call Manager (F5): Menu 3-2 (Card management).

3.2.1

CARDS IN THE NEXSPAN C/S/L/D RANGE (XL/XS/XC/XD)


CARD MANAGEMENT 1 COMMON BOARDS MANAGEMENT 2 MOTHER BOARD MANAGEMENT / MIGRATION 3 POWER SUPPLY MANAGEMENT / DUPLEX 4 IP BOARD PARAMETERS MANAGEMENT 5 ISDN BOARD SWITCHES STATUS ENTER YOUR CHOICE ---------------------------------------Figure 5: Card management (F6) Menu 3-2 (Card management) proposes the following 5 sub-menus for the NeXspan C/S/L/D range (XC, XL, XS and XL):

Common boards management (Menu 3-2-1) This menu is used to declare the cards in an XD/XL/XS cabinet (card type and status). Mother board management Migration (Menu 3-2-2) This menu is used to display device hardware and software configurations, and change from one device to another. Power supply / Duplex management (Menu 3-2-3) This menu is used to view/modify the device configuration (simplex/duplex), view/modify the status of the UCT card (active and passive), the RUCT card (active and passive), and to view/modify the status of the power supply/ventilation modules. IP board parameters management (Menu 3-2-4) This menu is used to modify the parameters for each PTx installed. ISDN board switches status (Menu 3-2-5) This menu shows the jumper status for each ISDN access.

Page 22

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.2.1.1

COMMON BOARDS MANAGEMENT (MENU 3-2-1) NeXspan D (XD) NeXspan XD consists of one main cabinet and, if necessary, one or two expansion cabinets. The equipment number is, therefore, preceded by the number of the cabinet in which it is located: 1 = main cabinet 2 = 1st expansion cabinet 3 = 2nd expansion cabinet

Example: Card 1-15 (card in slot 15 of the main cabinet) Each cabinet contains 16 slots numbered from 00 to 15, corresponding to the following physical positions:

IUCT-D (C) UCT-D (B) / RUCT (B) UCT-D (A) / RUCT (A) 01 03 01 05 07 09 11 13 15 00 02 01 04 06 08 10 12 14 D E

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 23

COMMON BOARDS MANAGEMENT CARD 1-00 : TYPE : IN SERVICE CARD 1-01 : TYPE CARD 1-02 : TYPE CARD 1-03 : TYPE : DISABLED CARD 1-04 : TYPE CARTD 1-05 : TYPE LD4X .......... ........... ........... 32-CHANNEL PTx .......... ........... ...........

CARD 1-06 : TYPE LNX 16 DIGITAL EXTENS. : IN SERVICE .......... CARD 1-07 : TYPE LAX/LHX 16 ANALOGUE EXTENS. : IN SERVICE .......... ---------------------------------------Figure 6: Common boards management (XD) COMMON BOARDS MANAGEMENT CARD 1-08 : TYPE CARD 1-09 : TYPE CARD 1-10 : TYPE CARD 1-11 : TYPE CARD 1-12 : TYPE CARD 1-13 : TYPE CARD 1-14 : TYPE CARD 1-15 : TYPE ........... ........... ........... ........... ........... ........... ........... ...........

---------------------------------------Figure 7: Common boards management (XD) (continued) 1. It is not possible to declare a card on slots 14 and 15 of the main cabinet. Slots 14 and 15 are displayed but the MMC does not propose device integration on these two slots. A BTX card can be installed on any of these two slots.

Page 24

11/2006

AMT/PTD/PBX/0053/2/2/EN

COMMON BOARDS MANAGEMENT CARD 2-00 : TYPE CARD 2-01 : TYPE CARD 2-02 : TYPE CARD 2-03 : TYPE CARD 2-04 : TYPE CARD 2-05 : TYPE CARD 2-06 : TYPE CARD 2-07 : TYPE ........... ........... ........... ........... ........... ........... ........... ...........

---------------------------------------Figure 8: Common boards management (XD) (continued) COMMON BOARDS MANAGEMENT CARD 2-08 : TYPE CARD 2-09 : TYPE CARD 2-10 : TYPE CARD 2-11 : TYPE CARD 2-12 : TYPE CARD 2-13 : TYPE CARD 2-14 : TYPE ........... ........... ........... ........... ........... ........... ...........

CARD 2-15 : TYPE LAX/LHX 16 ANALOGUE EXTENS. : IN SERVICE .......... ---------------------------------------Figure 9: Common boards management (XD) (continued)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 25

COMMON BOARDS MANAGEMENT CARD 3-00 : TYPE CARD 3-01 : TYPE CARD 3-02 : TYPE CARD 3-03 : TYPE CARD 3-04 : TYPE CARTD 3-05 : TYPE CARD 3-06 : TYPE CARD 3-07 : TYPE ........... ........... ........... ............ ........... ........... ........... ...........

---------------------------------------Figure 10: Common boards management (XD) (continued) COMMON BOARDS MANAGEMENT CARD 3-08 : TYPE CARD 3-09 : TYPE CARD 3-10 : TYPE CARD 3-11 : TYPE CARD 3-12 : TYPE CARD 3-13 : TYPE ........... ........... ........... ........... ........... ...........

CARD 3-14 : TYPE LAX/LHX 16 ANALOGUE EXTENS. : IN SERVICE .......... CARD 3-15 : TYPE LAX/LHX 16 ANALOGUE EXTENS. : IN SERVICE .......... ---------------------------------------Figure 11: Common boards management (XD) (continued) When the system is powered on, the cards which do not have a processor, and which are installed in the PBX, are identified and displayed automatically. The cards which have a processor, such as CA1, LS1, CP1, CS1, are signalled as being in download status.

Page 26

11/2006

AMT/PTD/PBX/0053/2/2/EN

NeXspan L (XL) XL consists of one main cabinet and, if necessary, one or two expansion cabinets. The equipment number is, therefore, preceded by the number of the cabinet in which it is located:

1 = main cabinet 2 = 1st expansion cabinet 3 = 2nd expansion cabinet

Example: Card 1-03 (card in slot 03 of the main cabinet) each cabinet contains 14 slots numbered from 00 to 13, corresponding to the following physical positions: UCT-L (RUCT-L) 01 03 05 07 09 11 13 COMMON BOARDS MANAGEMENT CARD 1-00 CARD 1-01 CARD 1-02 CARD 1-03 CARD 1-04 CARD 1-05 CARD 1-06 CARD 1-07 : : : : : TYPE FAULTY TYPE IN SERVICE TYPE LT2 ISDN T2 .......... 32-CHANNEL PTx .......... ........... 08-CHANNEL PTx .......... ........... ........... LNX 16 DS.SUB. .......... LAX/LHX 16 ANALOG. .......... 00 02 04 06 08 10 12

: TYPE : NOT EQUIPPED : TYPE : TYPE : : : : TYPE IN SERVICE TYPE IN SERVICE

---------------------------------------Figure 12: Common boards management (XL)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 27

COMMON BOARDS MANAGEMENT CARD 1-08 : TYPE CARD 1-09 : TYPE CARD 1-10 : TYPE CARD 1-11 : TYPE CARD 1-12 : TYPE CARD 1-13 : TYPE ........... ........... ........... ........... ........... ...........

---------------------------------------Figure 13: Common boards management (XL) (continued) COMMON BOARDS MANAGEMENT CARD 2-00 : TYPE CARD 2-01 : TYPE CARD 2-02 : TYPE CARD 2-03 : TYPE CARD 2-04 : TYPE CARTD 2-05 : TYPE CARD 2-06 : TYPE CARD 2-07 : TYPE ........... ........... ........... ........... ........... ........... ........... ...........

---------------------------------------Figure 14: Common boards management (XL) (continued) COMMON BOARDS MANAGEMENT CARD 2-08 : TYPE CARD 2-09 : TYPE CARD 2-10 : TYPE CARD 2-11 : TYPE CARD 2-12 : TYPE CARD 2-13 : TYPE ........... ........... ........... ........... ........... ...........

---------------------------------------Figure 15: Common boards management (XL) (continued)

Page 28

11/2006

AMT/PTD/PBX/0053/2/2/EN

COMMON BOARDS MANAGEMENT CARD 3-00 : TYPE CARD 3-01 : TYPE CARD 3-02 : TYPE CARD 3-03 : TYPE CARD 3-04 : TYPE CARTD 3-05 : TYPE CARD 3-06 : TYPE CARD 3-07 : TYPE ........... ........... ........... ........... ........... ........... ........... ...........

---------------------------------------Figure 16: Common boards management (XL) (continued) COMMON BOARDS MANAGEMENT CARD 3-08 : TYPE CARD 3-09 : TYPE CARD 3-10 : TYPE CARD 3-11 : TYPE CARD 3-12 : TYPE CARD 3-13 : TYPE ........... ........... ........... ........... ........... ...........

----------------------------------------

Figure 17: Common boards management (XL) (continued) When the system is powered on, the cards which do not have a processor, and which are installed in the PBX, are identified and displayed automatically. The cards which have a processor, such as CA1, LS1, CP1, CS1, are signalled as being in download status.

NeXspan S (XS)

XS consists of one main cabinet and possibly one expansion cabinet. The equipment number is, therefore, preceded by the number of the cabinet in which it is located:

1 = main cabinet 2 = expansion cabinet

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 29

Example: Card 1-01 (card in slot 01 of the main cabinet) Each cabinet contains 3 slots numbered from 00 to 02, corresponding to the following physical positions: 02 01 UCT-S (RUCT-S) COMMON BOARDS MANAGEMENT CARD 1-00 : TYPE CARD 1-01 : TYPE : IN SERVICE CARD 1-02 : TYPE : IN SERVICE CARD 2-00 : TYPE CARD 2-01 : TYPE CARD 2-02 : TYPE ......... LNX 16 DS.SUB ......... 32-CHANNEL PTX ......... ......... ......... ......... 00

--------------------------------------------------Figure 18: Card management (XS)

NeXspan C (XC)

XC consists of one main cabinet. It cannot be fitted with expansion cards, the subscriber sockets and the T0/S0 interfaces are built into the CPU card. Menu 3-2-1 "Common boards management" is, therefore, empty. CARD (CABINET NUMBER SLOT NUMBER): TYPE This field indicates the type of card in the specified location when the PBX is powered on or on TOTAL RESET. Use the terminal space bar to select a card type. LNX 16 DS.SUB LNX 08DS.SUB LN8 08DS.SUB LAX/LHX 16 ANALOG. LAX/LHX 08 ANALOG. LN16 card for 16 digital extensions. LN16 card for 8 digital extensions. LN8 card for 8 digital extensions. LA16X/LH16X card for 16 analogue extensions. LA16X/LH16X card for 8 analogue extensions.

LA8/LH8 08 ANALOG. LA8/LH8 card for 8 analogue extensions. LMX 16MIXD. EXT. LMX 08MIXD. EXT. LM8 08AB. COMBINED LR4/LR4E 4ANAL.TK. LMX card for 16 digital or analogue extensions Under-equipped LMX card for 8 digital or analogue extensions LM8 card for 4 digital extensions and 4 analogue extensions. LR4 card with 4 analogue trunk line equipment interfaces.

Page 30

11/2006

AMT/PTD/PBX/0053/2/2/EN

LR4A 4SUPPL.LR TIE LINE CA1 CS1 CP1 LT2 ISDN T2 (24tS) REDUCED LT2 S2 ISDN LT2 PRI ISDN LT2 (24 ts) PCM LT2 (32it) T1 PCM LT2 LD4 LD4X 00 CHANNEL PTx

LR4 card with 4 analogue trunk line equipment interfaces. LI1 card for 2- or 4-wire tie-line equipment interfaces. Card for 4 V24 asynchronous links. Card for 2 X25 asynchronous links. Packet circuit coupler card with two equipment interfaces. LT2 card in T2 configuration. LT2 card in reduced configuration (limited to 16TS). LT2 card in S2 configuration. LT2 card in PRI ISDN configuration LT2 card in PCM configuration LT2 card in T1 PCM configuration LD4/LD4N card for T0/S0 access, 2- or 4-channel radio base stations. LD4X card for T0/S0 access, 2- or 4-channel radio base stations. CAUTION: card compatible with software release R4.1 and above. PTx card which performs gateway (TCP/IP-X25) and tunnelling (X25 tun. over IP) functions. CAUTION: No PTx card can be enabled unless the network cable is connected. PTx card which performs gateway (TCP/IP-X25), tunnelling (X25 tun. over IP) and 8 voice over IP circuit management functions. CAUTION: No PTx card can be enabled unless the network cable is connected. 16-channel PTx card which performs gateway (TCP/IP-X25), tunnelling (X25 tun. over IP) and 16 voice over IP circuit management functions. CAUTION: No PTx card can be enabled unless the network cable is connected. 32-channel PTx card which performs gateway (TCP/IP-X25), tunnelling (X25 tun. over IP) and 32 voice over IP circuit management functions. CAUTION: No PTx card can be enabled unless the network cable is connected. IP card with the SIP GATEWAY (GSI) application used to manage SIP extensions or SIP trunks

08 CHANNEL PTx

16-CHANNEL PTx

32-CHANNEL PTx

IPS

STATUS This field indicates the card status: IN SERVICE: DISABLED: NOT EQUIP.: Card being used in the PBX. Card disabled because of a change being made. Card absent from the system or used by an MMC to replace one card with another of a different type (for example, replacing an analogue card with a digital card).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 31

FAULTY: NET ALARM: IPS card:

Card previously in service and has been removed from the system. LSB status for NETWORK cards (in particular PTx/PVI) which indicates network disconnection (IP, ISDN, etc.). The IPS card communicates with the PBX only via the IP network. This card is always seen as "IN SERVICE". The only modification action allowed is RESET.

3.2.1.2

PROCEDURE FOR INSTALLING A CARD Warning:

Before disabling a card, all the equipment interfaces on that card must first be disabled. A card which supports an attendant console, a night console trunk group declared in a trunk group cannot be changed to the status NOT EQUIP. This equipment must be deleted beforehand. If no network link is connected to the PTx card, no TCP gateway link can be enabled.

IMPORTANT : Always power off your system to install or uninstall a card, except for an LA16X, LA16X-8, LN16X, LN16X-8, LH16X, LH16X-8, LD4N type card in an XD, XL or XS cabinet (with rackable expansion cards). Replacing an "old generation" card with an "old generation" card: 1. Set all the equipment interfaces on the card out of service (DISABLED). 2. Delete all the directory numbers assigned to the equipment interfaces on the card in menu 1-1-1 (Extension characteristics). 3. Change the status of the carte from In service to Not equip. 4. Power off the PBX (the main cabinet and the expansion cabinet(s)). 5. If it is an XS, with non-rackable expansion cards, open the cabinet. Note : For information on how to install or replace a card in an Nexspan cabinet, see the Installation and Maintenance Guide 6. Remove the card from the PBX. 7. Insert the new card. 8. If it is an XS, with non-rackable expansion cards, close the cabinet. 9. Power on the PBX again (the main cabinet and the expansion cabinet(s). 10. Select the card type and validate the status In service (wait until the download is complete). 11. If you are installing a subscriber card, redefine the directory numbers in menu 1-1-1 (Extensions characteristics).

Page 32

11/2006

AMT/PTD/PBX/0053/2/2/EN

Replacing an "old generation" card with a "new generation" card (LA16X, LA16X-8, LN16X, LN16X-8, LH16X, LH16X-8, LD4N and LD4X): 1. Change the (LA8, LN8) card status from In service to Disabled. 2. Power off the PBX (the main cabinet and the expansion cabinet(s)). 3. If it is an XS, with non-rackable expansion cards, open the cabinet. Note : For information on how to install or replace a card in an Nexspan cabinet, see the Installation and Maintenance Guide 4. Remove the card from the PBX. 5. Insert the new card. Note : In an XD, XL or XS cabinet with rackable expansion cards, it is possible to hot plug or unplug an LA16X, LA16X-8, LN16X, LN16X-8, LH16X, LH16X-8, LD4N or LD4X card. For information on how to install or replace a card in an Nexspan cabinet, see the Installation and Maintenance Guide 6. If it is an XS, with non-rackable expansion cards, close the cabinet 7. Power on the PBX again (the main cabinet and the expansion cabinet). 8. Select card type and confirm the status In service. 9. Define all the directory numbers for the additional equipment interfaces on the card in menu 1-1-1 (Extension characteristics). Replacing an LD4N card by an LD4X card: 1. Change the LD4N card status from In service to Disabled. 2. Modify the card label LD4 => LD4X . The MMC modifies the configuration of the LD4N card to transform it into an LD4X (contrary to the LD4N, the LD4X uses the dedicated junction of its equipment number, there are no more conflicts between cards and therefore, the card installation restrictions no longer apply). 3. Dans le cas dun XS avec cartes d'extension non rackables, mettre le PBX hors tension (le coffret principal et le (les) coffret(s) d'extension) puis ouvrir le coffret et retirer la carte du PBX 4. For a rackable XS or XL , remove the card from the PBX. 5. Configure the LD4N card as an LD4X (jumper J14 to be set). 6. Insert the card configured as LD4X. 7. For a non-rackable XS, close the cabinet and switch the PBX back on (main cabinet and expansion cabinet). 8. Switch the LD4X card to In service.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 33

3.2.1.3

MOTHER BOARD MANAGEMENT MIGRATION (MENU 3-2-2) This MMC is used to display device hardware and software configurations, and change from one device to another. The hardware view corresponds to the actual platform and cannot be modified. The software view corresponds to the database content and cannot be modified. In general, the hardware and software configurations are identical. They may vary in the following cases:


NeXspan D (XD)

if you add or remove an XS or XL expansion cabinet if you carry out a back-up / restore operation (for instance XS configuration back-up and restore on an XL) if you change from one device to another.

MOTHER BOARD MANAGEMENT / MIGRATION UCT: HARDW. VIEW XXXD CONFIGURATION PTX EN 0-04 : IN SERVICE HSCX EN 0-05 : IN SERVICE MEVO EN 0-06 : IN SERVICE SOFTW. VIEW XXXD

.......... .......... ..........

TYPE OF SERVICE POSTE CLASS V23 TMS VC5409 TYPE 5409: SUBSC + SUBSC STATE : IN SERVICE .......... ..... ---------------------------------------Figure 19: XD hardware and software configurations Migration (menu 3-2-2)

Page 34

11/2006

AMT/PTD/PBX/0053/2/2/EN

UCT: HARDWARE VIEW XD CONFIGURATION Read-only field. Used to view the device hardware configuration (one XD-cabinet, two XXD-cabinet, three XXXD-cabinet configuration).

SOFTWARE VIEW XD XXD XXXD

Used to view the device software configuration (one XD-cabinet, two XXD-cabinet, three XXXD-cabinet configuration). You can modify this field in order to change from one device to another (add or remove one expansion cabinet). IN SERVICE IN SERVICE Used to activate the virtual card in the PBX. DISABLED Used to deactivate the virtual card for replacement. ............. Used to maintain the virtual card status. DISABLED ...

PTX IN 0-04: STATUS HSCX EN 0-05: STATE MEVO EN 0-06: STATE Read-only field which indicates the position and status of virtual cards (IN SERVICE, DISABLED, FAULTY). A virtual card has the same functions as an expansion card but is installed on the CPU card (HSCX = CP1).

CLASS SERVICE TYPE This line is only displayed for a configuration using both set types. V23 DTMF

CLASS service allows analogue terminals to receive the following information about the current call: Caller number (if there is no call offering restriction) and date and time of call (only available in V23 mode). Select V23 for standard European class sets and DTMF for Danish class sets. TMS VC5409: TYPE 5409 : EXTENSION 5409 : SUBSC. + SOCOTEL 5409 : SUBSC. + R2 ..

Select the right TMS type. STAT: IN SERVICE Field which indicates the TMS status. The following transitions are possible: IN SERVICE NOT EQUIP. DISABLED ..

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 35

NeXspan L (XL) MOTHER BOARD MANAGEMENT - MIGRATION UCT: HARDWARE VIEW XL CONFIGURATION PTX IN 0-04: IN SERVICE HSCX IN 0-05: IN SERVICE BVF IN 0-06: IN SERVICE SOFTWARE VIEW XL .......... .......... ..........

CLASS SERVICE TYPE V23 TMS VC5409 TYPE 5409:SUBSC.+SUBSC. STAT: IN SERVICE .......... ---------------------------------------Figure 20: XL hardware and software configurations Migration (menu 3-2-2)

Page 36

11/2006

AMT/PTD/PBX/0053/2/2/EN

UCT: HARDWARE VIEW XL CONFIGURATION Read-only field. Used to view the device hardware configuration (one XL-cabinet, two XXL-cabinet, three XXXL-cabinet configuration).

SOFTWARE VIEW XL XXL XXXL

Used to view the device software configuration (one XL-cabinet, two XXL-cabinet, three XXXLcabinet configuration). You can modify this field in order to change from one device to another (add or remove one expansion cabinet). IN SERVICE IN SERVICE Used to activate the virtual card in the PBX. DISABLED Used to deactivate the virtual card for replacement. ............. Used to maintain the virtual card status. DISABLED ...

PTX IN 0-04: STATUS HSCX EN 0-05: STATUS BVF EN 0-06: STATUS Read-only field which indicates the position and status of virtual cards (IN SERVICE, DISABLED, FAULTY). A virtual card has the same functions as an expansion card but is installed on the CPU card (HSCX = CP1).

CLASS SERVICE TYPE Note : This line is only displayed for a configuration using both set types. V23 Q23

CLASS service allows analogue terminals to receive the following information about the current call: Caller number (if there is no call offering restriction) and date and time of call (only available in V23 mode). Select V23 for standard European class sets and DTMF for Danish class sets. TMS VC5409: TYPE 5409 : EXTENSION 5409 : SUBSC. + SOCOTEL 5409 : SUBSC. + R2 ..

Select the right TMS type. STAT: IN SERVICE Field which indicates the TMS status. The following transitions are possible: IN SERVICE NOT EQUIP. DISABLED ..

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 37

NeXspan S (XS)

MOTHER BOARD MANAGEMENT - MIGRATION UCT: hardware view XXS CONFIGURATION DIG. IN 0-00: IN SERVICE ANAL IN 0-01: IN SERVICE S/T0 IN 0-02: IN SERVICE T0 IN 0-03: IN SERVICE PTX IN 0-04: IN SERVICE HSCX IN 0-05: IN SERVICE BVF IN 0-06: IN SERVICE DIGITAL SET: 8 ANALOG SET: 8 ONLY T0 ACCESS: 2 software view XXS ......... ......... ......... ......... ......... ......... ......... 8 8 2

CLASS SERVICE TYPE V23 TMS VC5402 TYPE 5402 : SUBSCR STAT: IN SERVICE ......... --------------------------------------------------Figure 21: XS hardware and software configurations Migration (menu 3-2-2)

Page 38

11/2006

AMT/PTD/PBX/0053/2/2/EN

UCT: HARDWARE VIEW XXS CONFIGURATION Read-only field. Used to view the device configuration (one XS-cabinet or two XXScabinet configuration).

SOFTWARE VIEW XS XXS XL XXL XXXL GX-GLOBAL

Used to view the device software configuration (one XS-cabinet or two XXS-cabinet configuration). You can modify this field in order to change from one device to another (add or remove one expansion cabinet, change from an XS cabinet to an XL cabinet). GX-GLOBAL is a software view used for XS => XL migration and to display the position of XS on the CPU card, as well as the common positions of XL. It is thus possible to request the transfer of the extensions located on the XS CPU card to a new location on the XL. Once the extensions are transferred, we recommend that you realign the software view and the hardware view.

NUM ANAL S/T0 T0 PTX HSCX BVF

DIG. EN 0-00: STATUS EN 0-01: STATUS IN 0-02: STATUS IN 0-03: STATUS IN 0-04: STATUS EN 0-05: STATUS EN 0-06: STATUS

IN SERVICE

DISABLED

...

IN SERVICE Used to activate the virtual card in the PBX. DISABLED Used to deactivate replacement. ... Used to maintain the virtual card status. 8 Indicates the number of digital sets using the software. the virtual card for

Read-only field which indicates the position and status of virtual cards (IN SERVICE, DISABLED, FAULTY). A virtual card has the same functions as an expansion card but is installed on the CPU card (HSCX = CP1, S/T0 and T0 = LD4). DIGITAL SETS: 8 Indicates the number of digital sets on the CPU card.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 39

UCT: HARDWARE VIEW ANALOGUE SETS: 8 Indicates the number of analogue sets on the CPU card. ONLY T0 ACCESS: 2 Indicates the number of T0 accesses on the CPU card. CLASS SERVICE TYPE

SOFTWARE VIEW 8 Indicates the number of analogue sets using the software. 2 Indicates the number of T0 accesses using the software.

Note : This line is only displayed for a configuration using both set types. V23 Q23 CLASS service allows analogue terminals to receive the following information about the current call: Caller number (if there is no call offering restriction) and date and time of call (only available in V23 mode). Select V23 for standard European class sets and DTMF for Danish class sets. TMS VC5402: TYPE 5402 : SUBSCR Select the right TMS type. STAT: IN SERVICE Field which indicates the TMS status. The following transitions are possible: IN SERVICE NOT EQUIP. DISABLED .. ..

Page 40

11/2006

AMT/PTD/PBX/0053/2/2/EN

NeXspan C (XC)

MOTHER BOARD MANAGEMENT - MIGRATION UCT: hardware view XC CONFIGURATION DIG. IN 0-00: IN SERVICE ANAL IN 0-01: IN SERVICE S/T0 IN 0-02: IN SERVICE T0 IN 0-03: DISABLED PTX IN 0-04: IN SERVICE HSCX IN 0-05: IN SERVICE BVF IN 0-06: IN SERVICE DIGITAL SET: 4 ANALOG SET: 4 ONLY T0 ACCESS: 0 CLASS SERVICE TYPE TMS VC5402 TYPE STAT: IN SERVICE software view XC ......... ......... ......... ......... ......... ......... ......... 4 4 0 V23 5402 : SUBSCR .........

--------------------------------------------------Figure 22: XC hardware and software configurations Migration (menu 3-2-2) UCT: HARDWARE VIEW SOFTWARE VIEW

XC CONFIGURATION Read-only field. Used to view the device configuration (one XC-cabinet configuration).

XC XS XXS XL XXL XXXL

GX-GLOBAL

Used to view the device software configuration (one XC-cabinet configuration). You can modify this field in order to change from one device to another (change from an XC cabinet to an XS cabinet). GX-GLOBAL is a software view used for XC => XS or XC => XL migration and to display the position of XC on the CPU card, as well as the common positions of XS or XL. It is thus possible to request the transfer of the extensions located on the XC CPU card to a new location on the XS or XL. Once the extensions are transferred, we recommend that you realign the software view and the hardware view.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 41

NUM ANAL S/T0 T0 PTX HSCX BVF

DIG. EN 0-00: STATUS EN 0-01: STATUS IN 0-02: STATUS IN 0-03: STATUS IN 0-04: STATUS EN 0-05: STATUS EN 0-06: STATUS

IN SERVICE IN SERVICE

DISABLED

...

Used to activate the virtual card in the PBX. DISABLED Used to deactivate replacement. ... Used to maintain the virtual card status. the virtual card for

Read-only field which indicates the position and status of virtual cards (IN SERVICE, DISABLED, FAULTY). A virtual card has the same functions as an expansion card but is installed on the CPU card (HSCX = CP1, S/T0 = LD4). DIGITAL SETS: 4 Indicates the number of digital sets on the CPU card. ANALOGUE SETS: 4 Indicates the number of analogue sets on the CPU card. ONLY T0 ACCESS: 0 Indicates the number of T0 accesses on the CPU card. CLASS SERVICE TYPE

4 Indicates the number of digital sets using the software. 4 Indicates the number of analogue sets using the software. 0 Indicates the number of T0 accesses using the software.

Note : This line is only displayed for a configuration using both set types. V23 Q23 CLASS service allows analogue terminals to receive the following information about the current call: Caller number (if there is no call offering restriction) and date and time of call (only available in V23 mode). Select V23 for standard European class sets and DTMF for Danish class sets. TMS VC5402: TYPE 5402 : SUBSCR ..

Select the right TMS type. STAT: IN SERVICE Field which indicates the TMS status. The following transitions are possible: IN SERVICE NOT EQUIP. DISABLED ..

Page 42

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.2.1.4

POWER SUPPLY /DUPLEX MANAGEMENT (MENU 3-2-3) POWER SUPPLY DUPLEX MANAGEMENT CPU CONFIGURATION - UC 1-0A ACTIVE - UC 1-0B PASSIVE - IUC 1-0C - RUC 2-0A ACTIVE - RUC 2-0B PASSIVE - RUC 3-0A ACTIVE - RUC 3-0B PASSIVE IN IN IN IN IN IN IN SERVICE SERVICE SERVICE SERVICE SERVICE SERVICE SERVICE DUPLEX ........ ........ ........ ........ ........ ........ ........ ADS ........ PRESENT 25

POWER SUPPLY CONFIGURATION - LOCATION 1-0D: TYPE STATUS: IN SERVICE BATTERY: TEMP. (C):

-----------------------------------------------Figure 23: Power supply /duplex management (menu 3-2-3)(continued)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 43

POWER SUPPLY DUPLEX MANAGEMENT - LOCATION 1-0E: TYPE STATUS: IN ALARM BATTERY: TEMP. (C): FAULTY: - LOCATION 2-0D: TYPE STATUS: IN SERVICE BATTERY: TEMP. (C): - LOCATION 2-0E: TYPE STATUS: IN ALARM BATTERY: TEMP. (C): FAULTY: ADS ........ PRESENT 28 TEMPERATURE ADS ........ ABSENT 25 ADS ........ NOT AVAILABLE 25 FAN

--------------------------------------------Figure 24: Power supply /duplex management (menu 3-2-3)(continued) POWER SUPPLY MANAGEMENT / DUPLEX

- LOCATION 3-0D : TYPE STATUS : IN SERVICE BATTERY : TEMP. (C): - LOCATION 3-0E : TYPE STATUS : EN SERVICE BATTERY : TEMP. (C):

ADS ........ ABSENT 25 ADS ........ ABSENT 25

--------------------------------------------Figure 25: Power supply /duplex management (menu 3-2-3)(continued) This menu is used to view/modify the device configuration (simplex/duplex), view/modify the status of the UCT card (active and passive), the RUCT card (active and passive), and to view/modify the status of the power supply/ventilation modules.

Page 44

11/2006

AMT/PTD/PBX/0053/2/2/EN

CPU CONFIGURATION Simplex Duplex This line is used to view/modify the PBX configuration: 1. Simplex configuration: the PBX is fitted with only one CPU card (in the main cabinet and in the expansion cabinet(s))

2. Duplex configuration: the PBX is fitted with two CPU cards (in the main cabinet and in the
expansion cabinet(s)) To change from Simplex configuration to Duplex configuration, select Duplex and press Enter to confirm. The system will take into account the second UCT-D (and RUCT-D) card and ensure as soon as possible full synchronisation between the active card and the new passive card (software, data, announcements, IVR, etc.). The passive card then becomes active during the next switchover. - UC 1-0A ACTIVE This line, in read only mode, is used to view the status of the active UCT card. - UC 1-0B PASSIVE In a duplex configuration, this line is used to view and modify the status of the passive UCT card. The following transitions are possible: EN SERVICE NON EQUIPE SOUS OPER. ..

- IUC 1-0C This line is used to view and modify the status of the UCT card. The following transitions are possible: EN SERVICE - RUC 2-0A ACTIVE This line is used to view and modify the status of the active RUCT card in the first expansion cabinet. The following transitions are possible: EN SERVICE NON EQUIPE SOUS OPER. .. NON EQUIPE SOUS OPER. ..

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 45

- RUC 2-0B PASSIVE In a duplex configuration, this line is used to view and modify the status of the passive RUCT card in the first expansion cabinet. The following transitions are possible: EN SERVICE - RUC 3-0A ACTIVE This line is used to view and modify the status of the active RUCT card in the second expansion cabinet. The following transitions are possible: EN SERVICE - RUC 3-0B PASSIVE In a duplex configuration, this line is used to view and modify the status of the passive RUCT card in the second expansion cabinet. The following transitions are possible: EN SERVICE NON EQUIPE SOUS OPER. .. NON EQUIPE SOUS OPER. .. NON EQUIPE SOUS OPER. ..

POWER SUPPLY CONFIGURATION - POSITION X-0Y: TYPE ADS VADS

This line is used to view/modify the type of module available in the position indicated (position D or E, see figure below): power supply module (ADS) or ventilation module (VADS). Position 1-0Y corresponds to a position of the main cabinet, while position 2-0Y corresponds to a position of the expansion cabinet, and position 3-0Y a position of the second expansion cabinet.

Page 46

11/2006

AMT/PTD/PBX/0053/2/2/EN

IUCT-D (C) UCT-D (B) / RUCT (B) UCT-D (A) / RUCT (A) 01 03 01 05 07 09 11 13 15 00 02 01 04 06 08 10 12 14 D E

The following lines are used to view information about the module in question (status, presence of a battery (for power supply module), temperature, threshold, alarm). STATUS: IN SERVICE This line is used to view/modify the status of the power supply module (ADS) or ventilation module (VADS). The following transitions are possible: EN SERVICE NON EQUIPE SOUS OPER. ..

If a problem is detected, the status of the module is IN ALARM. BATTERY This line only appears for an ADS power supply module. For a power supply module, this line, in read only mode, indicates whether or not a battery is connected. The following transitions are possible: PRESENTE TEMP This line, in read only mode, indicates the internal temprature (in C) of the power supply/ventilation module (temperature measured by sensors located inside the module). When the temperature exceeds a certain threshold (fixed by the manufacturer), the (ADS or VADS) status changes to "IN ALARM". ABSENTE

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 47

ALARM This line is displayed only when the status of the power supply module (ADS) or ventilation module (VADS) is IN ALARM. This line, in read only mode, indicates the alarms detected on the power supply or ventilation module. The following transitions are possible: PERTE SECTEUR VENTILATEUR TEMPERATURE TENSION SONNERIE TENSION REDRESSEUR

The mains failure, ringer power, and rectifier power alarms concern only the power supply module.

Page 48

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.2.1.5

IP BOARD PARAMETERS MANAGEMENT (MENU 3-2-4)

IP BOARD PARAMETERS MANAGEMENT EQPT IP ADDRESS MASK ---------------------------------------0-04 131.129.255.53 255.255.255.224 1-01 131.129.255.54 255.255.255.224 SELECT THE IP CARD 101

---------------------------------------Figure 26: IP board parameters management (menu 3-2-3) This menu is used to view all the declared PTX cards (including the virtual card fitted on the UCT card corresponding to position 0-04), the IP addresses and the associated sub-network masks. The last line is used to select one of the cards in order to display and modify its characteristics. LOC Indicates the card's position in the cabinet. The equipment number is preceded by the number of the cabinet in which it is located:


Example: IP ADDRESS

0 : position on the CPU card (PTx virtual card in 0-04) 1 : position in the main cabinet (XD, XL and XS) EQPT 0-04 (equipment number 04 on the CPU card)

Card IP address over 4 bytes. This address is displayed as decimal values separated by points. Note : The integrated IP port on the UCT CPU card is declared automatically (pre-defined IP address = 192.168.65.01 and sub-network mask = 255.255.255.0). This function is used to manage the PBX (after a TOTAL Reset) internally via a management tool (M7420 or M7425) connected to the Ethernet port of the UCT CPU card using a twisted cable. You can then re-configure the UCT IP address.

MASK The IP address mask which comprises the number of the sub-network and the number of the set on the sub-network. The sub-network address and IP address must respect the following relations:

if the first bit of the IP address is 0 (class A), the sub-network address must be in the form: 255.xxx.xxx.xxx,

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 49

if the first 2 bits of the IP address are 10 (class B), the subnetwork address must be in the form: 255.255.xxx.xxx, if the first 3 bits of the IP address are 110 (class C), the subnetwork address must be in the form: 255.255.255.xxx.

SELECT THE IP BOARD Using the space bar, select in this drop-down menu the position of a card to display and modify its characteristics. Press Enter to confirm. Note : Position 0-04 indicates the IP address position on the CPU card.

IP CARD PARAMETERS 1-01 IP ADDRESS 131.129.255.54. MASK 255.255.255.224 DEFAULT ROUTER 131.129.255.33. UDP PORT 40000 TCP PORTS: FIRST NUMBER 41000 LAST NUMBER 41999 SETS LOGIN ALLOWED YES SNMP AGENT FUNCTION AUTHORISED YES DAYTIME FUNCTION AUTHORISED YES ETHERNET ADDRESS 08-00-71-09-80-2D LINK TYPE 10 Mb HALF DUPLEX LOGIN SITE OPTIMISATION MAINTEN - IP ADDRESS 1 131.129.255.54 (1-01) - IP ADDRESS 2 ..................... ---------------------------------------Figure 27: IP card selection The title indicates the card's position (cabinet number and position of the card in the cabinet). IP ADDRESS Card IP address on 4 bytes. Example: 192.42.11.154 Restrictions: 0.0.0.0, 255.255.255.255 and 127.0.0.1 are not valid addresses. Note : The decimal value of the first byte must not be greater than 223; if it is, the MMC displays the message: SYNTAX ERROR . MASK The IP address mask which comprises the number of the sub-network and the number of the set on the sub-network. DEFAULT ROUTER Router address. Only the IP address is mandatory: non provided data are at 0. UDP PORT Port number (5 digits maximum): value between 2050 and 65000 (by default, the port is set at 40000).

Page 50

11/2006

AMT/PTD/PBX/0053/2/2/EN

TCP PORTS - FIRST NUMBER Port number (5 digits maximum): value between 0 and 65534 (by default, the port is set at 41000). - LAST NUMBER Port number (5 digits maximum): value between 0 and 65534 (by default, the port is set at 41999). The difference between the first and last number of the port must be at least equal to 500. If this difference is not respected, the second number is automatically updated to restore this difference. SETS LOGIN ALLOWED YES NO This line is only displayed if the automatic mode is selected on the line "Login site optimisation" in menu 1-7-2 (Miscellaneous parameters). By selecting "YES", the card is declared as being eligible for set login. Selecting "NO" deletes the IP address of the board in the tables. (card declared as not being eligible for set login). Note : The default value for an IP card is "Yes". The default value for IP equipment number 0-04 on the CPU card is "No". SNMP AGENT FUNCTION AUTHORISED This function is used to respond to SNMP agent requests. DAYTIME FUNCTION AUTHORISD

This function is used to send the date (DayTime) to the IPS connected to the PBX. This value is sent via the network either from the CPU card or the PTX card of the cabinet, according to the IP access configuration:

For the CPU card, the default value is YES, thus giving priority to date transmission through the CPU card. For the PTX cards, the default value is NO

ETHERNET ADDRESS ETHERNET or MAC address of card over 6 bytes. This address is displayed as hexadecimal values separated by dashes. Example: 08-00-7103-00-0F If the card is not in service, the Ethernet address is replaced by: "................". LINK TYPE Indicates the type of IP link connected to a PTx card:

. (no link present, card not connected or disabled)


AMT/PTD/PBX/0053/2/2/EN Page 51

11/2006

10 Mb Half Duplex 10 Mb Full Duplex 100 Mb Half Duplex 100 Mb Full Duplex

LOGIN SITE OPTIMISATION - IP ADDRESS 1 - IP ADDRESS 2 Enables IP sets (i7xx and i2052) to have a connection as close as possible to their cluster/reference site and thus avoid excessive intersite throughput. These lines, in read only mode' are only displayed if the automatic mode is selected on the line "Login site optimisation" in menu 1-7-2 (Miscellaneous parameters). The two connection IP addresses for IP sets are automatically determined by the device according to the IP cards present and eligible. 3.2.1.6 ISDN BOARD SWITCHES STATUS (MENU 3-2-5) ISDN BOARD SWITCHES STATUS EQT NO. TYPE DIR NUM. / FX SYNC AUTOSUPPLY --------------------------------------------------------0-02-00 S0 300 YES YES 0-02-01 DECT FBORNE0 YES YES 0-02-02 T0 FT0-ETSI YES NO 0-02-03 T0 FT0-ETSI YES NO 1-01-00 S0 310 YES 40V 1-01-01 S0 311 YES NO 1-01-02 S0 312 YES NO 1-01-03 S0 313 YES 40V -------------------------------------------------------Figure 28: ISDN board switches status (menu 3-2-5) This menu indicates the jumper status for each ISDN access of the UCT-S (XS) and UCT-C (XC) cards. It also indicates the jumper status of the LD4X cards that are present in the PBX. EQT NO. Indicates the ISDN access equipment number (cabinet, card, equipment). The S/T0 subscribers on the CPU card (XS and XC) are used in positions 0-02-00 to 0-02-03. TYPE Indicates the ISDN subscriber type: T0 (trunk group), S0 (set), DECT (DECT base station). DIR NUM. / FX Indicates the associated trunk group (for network, DECT base station) or directory number (for S0 set). SYNC

Page 52

11/2006

AMT/PTD/PBX/0053/2/2/EN

Indicates if the access is synchronising (status of jumper CA1.1 on the LD4X card). AUTO-SUPPLY Indicates whether the access is auto-supplied. When an access on the LD4X card is remotely supplied, the voltage used is displayed (40V or 48V). Note : The remote supply information supplied by the LD4X card is only valid if the card is in service.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 53

3.2.2

MANAGING CARDS ON A CALL MANAGER


CARD MANAGEMENT CARD 0-00 : TYPE :IN SERVICE 00 CHANNEL PTX ..........

------------------------------------------------Figure 29: Managing Cards on a Call Manager The card management menu on a Call Manager is used to put the network cards into service. CARD (CABINET NUMBER SLOT NUMBER): TYPE This field indicates the type of card in the specified location when the PBX is powered on or on TOTAL RESET. STATUS This field indicates the card status: IN SERVICE: DISABLED: NOT EQUIP.: FAULTY: NET ALARM: Card being used in the PBX. Card disabled because of a change being made. Card absent from the system. Card previously in service and has been removed from the system. LSB status that indicates a disconnection from the IP network.

Page 54

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.3

SVF-BVF CONFIGURATION (MENU 3-3)


For the Call Manager (F5): this menu is not available. SVF-BVF CONFIGURATION 1 SVF-BVF: RECORD ANNOUNCEMENTS 2 SVF-BVF BOARD ACCESS CONFIGURATION GENERAL CHARACTERISTICS OF IVS IVB ENTER YOUR CHOICE .

---------------------------------------Figure 30: SVF-BVF configuration (F6)

3.3.1

RECORD ANNOUNCEMENTS (MENU 3-3-1)


For NeXspan C/S/L: Menu 3-3-1 and 5-5-2-5 (SVF-BVF: Record announcements) For the Call Manager: this menu is not available. SVF-BVF: RECORD ANNOUNCEMENTS PHYSICAL SLOT OF SOURCE BOARD PHYSICAL EQUIPMENT CATALOGUE NUM/GUIDE - LABEL - DURATION IN SEC. RECORDING PARAMETERS - CATALOGUE-MIXED GUIDE - RECORDING LEVEL - ATTENUATE MUSIC BY VOICE start recording Figure 31: Record announcements This menu is used to record customised announcements using a digital or analogue set, and to replace the pre-configured announcements on the card with new announcements. To update messages (also called announcements) on a UCT card (F6), you need the M7420 Music Manager tool. For messages written in Flash PROM, a list showing the location and length of each message is displayed. Synchronised messages are broadcast from the beginning. This menu can therefore be used to listen to the different message on the card without having to temporarily define a definable tone. Note : Accessing this menu puts the set out of service: it is therefore not recommended to access this menu unnecessarily. .. YES YES

PHYSICAL SLOT OF SOURCE Enter the equipment number of the set from which the announcement will be recorded (5 digits).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 55

BOARD PHYSICAL EQUIPMENT Enter the equipment number of the card containing the pre-configured announcements (006 for F6). Note : For F6, the voice mail system's virtual card on the UCT card contains preconfigured annoncements. Its equipment number is 006.

CATALOGUE NUM/GUIDE Enter the catalogue number (if different from 0) and the announcement number (value between 1 and 255). When the bothway connection is made with the first time interval allocated to the message function, you can listen to the selected message. Note : To view the number of an announcement, display the announcement list.

LABEL When the announcement number is validated, enter the message name. DURATION IN SEC. When the announcement number is validated, enter the message duration. RECORDING PARAMETERS CATALOGUE-MIXED GUIDE Enter the catalogue number (if different from 0) and the number of the announcement to be mixed (value between 1 and 255). This field is only filled in if mixing is requested. Therefore, the announcement which will be combined with another announcement must logically be a background melody on which another message is to be superimposed. RECORDING LEVEL Enter the recording level (value between 1 and 255). ATTENUATE MUSIC BY VOICE NO YES

Select YES to lower the music level when someone speaks: this parameter is also known as fading. START RECORDING NO YES

Select YES to start recording the message. During the operation, the message "Work In Progress" is displayed. When the card detects the end of the operation, the recording stops and the message is played back. After playback, you can make further recordings with different recording and sound levels.

Page 56

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.3.2

SVF-BVF BOARD ACCESS CONFIGURATION (F6) (MENU 3-3-2)


For the Call Manager: this menu is not available. SVF-BVF BOARD ACCESS CONFIGURATION
0-06-00 DIR. IN SERVICE 0-06-01 IVS. DISABLED SCRIPT GROUP USED BY SCRIPT 0 74050 SCRIPT 1 SCRIPT 2 SCRIPT 3 SCRIPT 4 SCRIPT 5 SCRIPT 6 SCRIPT 7 SCRIPT 8 SCRIPT 9 SCRIPT 11 .......... .......... 0 IN GROUP . . . . . . . . . . .

----------------------------------------

Figure 32: SVF-BVF card access configuration (F6) SVF-BVF BOARD ACCESS CONFIGURATION
SCRIPT 12 SCRIPT 13 SCRIPT 14 SCRIPT 15 . . . .

----------------------------------------

Figure 33: SVF-BVF card access configuration (F6) (continued) This MMC is used to ENABLE / DISABLE IVS accesses. It is also possible to assign script groups to the IVS accesses and to divide the scripts into different groups. 0-06-xx: STATUS Indicates the position and status of the physical access on cards which support spoken announcements (0-06-00) and voice prompts (0-06-01). You can proceed as follows: IN SERVICE IN SERVICE DISABLED DISABLED Physical access being used in the PBX. Physical access disabled.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 57

SCRIPT GROUPS A script group is a set of scripts present on a card. Assign a script group to the physical accesses. Note : By default, the number of group "0" is assigned to the physical accesses.

SCRIPTX

USED BY

IN GROUP

Indicates for each script, the logical subscriber(s) used and the group to which it/they belongs. Note : To assign or modify the script group numbers, you need to DISABLE the IVS accesses.

3.3.3

GENERAL CHARACTERISTICS OF IVS IVB (F6) (MENU 3-3-3)


For the Call Manager: this menu is not available. DISPLAY IVS GENERAL CHARACTERISTICS
BVF BOARD SLOT: 0-06 --------------------------------------------- FLASH SIZE (MEGABYTES) 15... - FIRMWARE VERSION NEF31034 104 - RECORDING LAW A LAW - COUNTRY CODE XF - COUNTRY INDEX 0 - ECHO CANCELLATION DEPTH (MS) 0 ---------------------------------------------

Figure 34: Display IVS general characteristics (F6) (Menu 3-3-3) This MMC is used to display the hardware information of the BVF board's interactive voice response server. FLASH SIZE Size of the flash memory in megabytes. FIRMWARE VERSION 16 alphanumeric characters max. RECORDING LAW A law or MU law. COUNTRY CODE 2-character value indicating the country's code (XF for France, GE for Germany, GB for Great Britain, etc.). COUNTRY INDEX Not used. ECHO CANCELLATION DEPTH (MS) Value associated to the DTMF detector and expressed in milliseconds.

Page 58

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.4

TERMINAL MANAGEMENT (MENU 3-4)


For the Call Manager (F5): this menu is not available. TERMINAL CONNECTION The UCT card offers the following connection possibilities:

a CONSOLE in VT100 emulation connected to the J6A connector of the UCT card or a PC in VT100 Emulation with communication software (example: CROSSTALK, HYPERTERMINAL, PROCOM+, BBTH, etc.) connected to the J9B connector of the UCT card to program, back up or restore the configuration a printer connected to the J6B connector of the UCT card.

To connect a Minitel terminal (French Videotex terminal) directly, use an analogue subscriber line by calling from the modem (799). For further information on terminal connection, refer to the Maintenance and Installation Manual.

TERMINAL MANAGEMENT
CONSOLE: - SPEED - DONGLE ON SERIAL PORT - REMOTE OPER. ACCESS, VIRTUAL PAD - COMPACT FORMAT HANDLING ACCESS - ACCESS MODE - ACTIVE SERVICE AT INIT. MODEM - REMOTE OPER. ACCESS, VIRTUAL PAD - ACCESS MODE - DO ACTIVATE CALLING FILTERING - DO ACTIVATE CALLS MONIT. (LgB) SERVER : - ACCESS WEB MMI --------------------------------------------V24.9600 NO YES YES VT100 or PC VT100 MMC NO VT100 NO NO YES

TERMINAL MANAGEMENT
PRINTER: - SPEED - FLOW CONTROL WAIT IN SECONDS VIRTUAL PAD CONNECTION REMAINS --------------------------------------------V24.9600 40 NO

Figure 35: Terminal management This Terminal Management menu is used to define the connection and access mode between the PBX and its peripherals devices (console, modem, printer).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 59

CONSOLE THROUGHPUT V24.300 V24.1200 V24.2400 V24.4800 V24.9600 V24.19200 V24.38400 V24.57600 V24.115200

Select a transmission speed. Note : By default, the PBX is configured to operate at a transmission speed of 9600 bauds. However, this speed can be changed to synchronise the link with the terminal connected (see the installation manual).

DONGLE ON SERIAL PORT NO YES

Select YES to declare a demonstration dongle. REMOTE OPER. ACCESS, VIRTUAL PAD NO YES

Select YES for remote access to the console. The QUIT command (Escape + Q, then Y to confirm) is displayed on screen:

10 operation VT100 (11 Minitel terminal operation) 30 remote operation VT100 (31 remote Minitel terminal operation) is used to call the remote site (multi-site operation) to carry out remote operation via the MMC server 40 remote server VT100 (41 remote server Minitel = used to call certain PBX internal servers (AFISER, SRVRHM, KITAXE, MUFACT, SRVANN) .

Note : The operation of VT100, Minitel, or Windows depends on the choice made in ACCESS MODE.

COMPACT FORMAT HANDLING ACCESS NO YES

This line is specific to the Management Centre. ACCESS MODE VT100 VT100 or PC MINITEL or VT100 MINITEL or PC or VT100

This field is used to define the console access mode.

Page 60

11/2006

AMT/PTD/PBX/0053/2/2/EN

ACTIVE SERVICE AT INIT. VT100 MMC ----------

Selecting "--------" connects the Management Centre to the PBX as soon as the latter initialises. MODEM REMOTE OPER. ACCESS, VIRTUAL PAD NON OUI

The remote maintenance modem integrated into the PBX is accessible via a remote modem, especially for remote maintenance operations (refer to the Remote ID management menu). Select YES for remote access to the modem. ACCESS MODE MINITEL MINITEL or VT100 MINITEL or PC or VT100 VT100

This field defines the remote access mode. ACTIVATE REQUESTOR FILTERING (ACCESS TO REMOTE OPERATION THROUGH A MODEM) NO YES

Selecting YES activates the filtering of remote maintenance MODEM access requestors. The list of numbers authorised to connect to the maintenance modem is contained in the Remote ID management menu. This parameter cannot be modified by the remote requestor; report: Insufficient rights. ACTIVATE CALL TRACING (JDB) NO YES

Selecting YES activates the traces of calls to the remote maintenance MODEM and sends them to the logbook. This parameter cannot be modified by the remote requestor; report: Insufficient rights. ACCESSED LAST ON 25/03/05 FROM 18:35 This line is used to view the date and time of last access through the remote maintenance modem.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 61

TO 18:38 BY 209 This line is used to view the local number or PSTN of the last remote maintenance modem access requestor and the connection end date. For these last two pieces of information, a configurable alarm ticket is issued, and the information is recorded in the logbook. WEB MMC ACCESS Selecting Yes activates the mode of access through a web browser PRINTER RATE V24.1200 V24.2400 V24.4800 V24.9600

Transmission speed selection for the printer. FLOW CONTROL WAIT IN SECONDS Wait duration is seconds, set by default at 40 seconds (maximum 99 seconds). The wait duration must be selected according to the printer connected and its management type. Some printers only reply with code "XON" (character transmission restart) after a total dump of their internal buffers. In this case, transmission is suspended for 20 or 30 seconds or more. Other printers authorise transmission restart as soon as there is memory space available. The message "printer unavailable" only appears at the end of the wait period. If a value is too small, the printout is aborted, and the diagnostic message is displayed (incorrectly). It is therefore advisable to adjust this parameter according to the configuration encountered. VIRTUAL PAD CONNECTION REMAINS NO YES

Select YES to maintain a virtual-PAD in "inactive" status: this PAD is disconnected at the end of non-use timeout.

Page 62

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.5

PASSWORD MANAGEMENT (MENU 3-5)


For the Call Manager (F5): Menu 3-3 (Password management).

3.5.1

NEXSPAN C/S/L/D (XC/XS/XL/XD) AND CALL MANAGER


PASSWORD MANAGEMENT MANAGEMENT PASSWORD READ-PROTECTED WRITE-PROTECTED READ-PROTECTED WRITE NOT PROTECTED READ-PROTECTED WRITE FORBIDDEN READ NORMAL. WRITE NORMAL. READ NORMAL. WRITE FORBIDDEN ADMINISTRATION PASSWORD READ: CHARGE COUNTER + LOG RESET - LAST ACCESS 14/09/04 13:25 READ: CHARGE COUNTER RESET READ: CLEAR FORBIDDEN INSTALLER PASSWORD - LAST ACCESS 14/09/04 MANUFACTURER PASSWORD - LAST ACCESS 14/09/04 14:07 16:02 DONNE DONNE DONNE DONNE DONNE SUIVI CONSOLE SUIVI SUIVI INSTA CONSOLE ***** CONSOLE

----------------------------------------------Figure 36: Password management on F5/F6 This menu is used to define passwords to protect operation: access to management (telephony, data , system) and operation administration. The system has 4 passwords which are used to access the defined menus:

DONNE SUIVI INSTA


.

> Password for telephony management (menu 1), data management (menu 2), and system management (menu 3). > Password for operation administration (menu 4). > Password only for PBX installers (menu 5).

This configuration operation is strongly recommended to guard against other users modifying your programming options using the password INSTA. Note : If you accidentally lose or forget your password, contact your technical assistance department. On TOTAL RESET of the system, the password is reset as INSTA.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 63

LAST ACCESS ON DD /MM/YY AT HH:MM

PORT USED

This line of information is provided for all the passwords and is displayed when the password is used. It indicates the date of the last use of the password concerned as well as the port used.

The list of the ports used is as follows: local communication port: CONSOLE connection to remote operation through a modem : MODEM connection through exploitation server : SERVEUR

Note : The port used is only displayed for password management in software release 4.1 and later. If the menu is accessed with the Installer password, the date and port of last use of the manufacturer password is displayed. This enables the user to detect any possible intrusions, using the manufacturer password. The installer is still not authorised to modify the manufacturer password

MANAGEMENT PASSWORD READ-PROTECTED WRITE-PROTECTED Enter the password using 5 alphanumeric characters (by default, DONNE). Note : The date and time of the last access are displayed as read access.

READ-PROTECTED WRITE NOT PROTECTED Enter the password using 5 alphanumeric characters (by default, DONNE). READ-PROTECTED WRITE FORBIDDEN Enter the password using 5 alphanumeric characters (by default, DONNE). READ NORMAL WRITE NORMAL Enter the password using 5 alphanumeric characters (by default, DONNE). READ NORMAL WRITE FORBIDDEN Enter the password using 5 alphanumeric characters (by default, DONNE). ADMINISTRATION PASSWORD READ: CHARGE COUNTER + LOG RESET Enter the password using 5 alphanumeric characters (by default, SUIVI). Note : The date and time of the last access are displayed as read access.

Page 64

11/2006

AMT/PTD/PBX/0053/2/2/EN

LIRE. REINIT TAXES Enter the password using 5 alphanumeric characters (by default, SUIVI). READ: CLEAR FORBIDDEN Enter the password using 5 alphanumeric characters (by default, SUIVI). INSTALLER PASSWORD Enter the password using 5 alphanumeric characters (by default, INSTA). Note : The date and time of the last access are displayed as read access.

MANUFACTURER PASSWORD As of release 2.1 it is possible to change the manufacturer password (5-character password). IMPORTANT : These lines are displayed if: the user enters this menu via an MPC or MPP password (privileged access rights) In this case, the manufacturer password can be accessed and modified. The date (and port) of the last time the manufacturer password was used is displayed. the user enters using the installer password. In this case, only the date (and port) on which the manufacturer's password was last used is displayed in order to detect possible intrusions using the manufacturer password.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 65

3.5.2

PASSWORD MANAGEMENT FOR COMPACT FORMATS


PASSWORD MANAGEMENT PASSWORD RECORD. MOBILE 12345

COMPACT FORMATS (CF) MANAGEMENT - MANAGEMENT CENTER TYPE - PASSWORD PROTECTION M7430 NO

- USED PASSWORD EXPFC -----------------------------------------Figure 37: Password management on F5/F6 Regardless of the type of PBX, you can protect all the compact formats with a specific password. Note : A compact format indicates an ASCII format, grouping parameters together in a condensed form (header + body): it is used principally for management by applications external to the PBX.

PASSWORD RECORD. MOBILE Enter the password using 5 alphanumeric characters (by default, 12345). Note : This password gives access to wireless management.

COMPACT FORMAT MANAGEMENT (FC) - MANAGEMENT CENTER TYPE M7425 M7430

Used to select the type of Management Centre connected to the PBX. According to the value selected in the menu PASSWORD MANAGEMENT, the behavior of the Compact Format is different:

if M7430 is selected, the unutilised equipment and the unutilised boards are not listed, if M7425 is selected, the unutilised equipment is listed in the state Not Equipped and the unutilised boards are listed in the state Under Operator (the boards in the state Not Equipped are never listed)

- PASSWORD PROTECTION NO YES

Select YES to protect all the compact formats with an installer password.

Page 66

11/2006

AMT/PTD/PBX/0053/2/2/EN

- PASSWORD USED Enter the password using 5 alphanumeric characters (by default, EXPFC). Note : This password can be modified if the installer password was used for the password management value.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 67

3.6

PARAMETER MANAGEMENT (MENU 3-6)


For the Call Manager (F5): Menu 3-4 (Parameter management).
PARAMETER MANAGEMENT

MULTI-COMPANY MANAGEMENT YES COM. CALL BETWEEN COMPANIES YES COM. DATA CALL BETWEEN COMPANIES NO MULTI-SITE management YES OPERATOR GROUP AUDIT ACTIVATED NO TYPE OF WIRELESS MANAGEMENT DECT CONSOLE TIMEOUT 600 cURrENT language LANGUAGE 1 INSTALL. NAME --------------------------............. Number of records (current) (REQUESTS) - TELEPHONY TYPE 1956 1956 - DATA TYPE 10.. 10.. - SERVICE TYPE 10.. 10.. MONITORING TYPE 24.. 24.. - MONITORING TYPE 40.. 40.. ----------------------------------------------Figure 38: Menu 3-6 (Parameter management). This menu is used to define management and the desired language. MULTI-COMPANY MANAGEMENT NO YES

Select YES to display all the multi-company menus. On start up, the system is configured in single-company configuration. Note : If you select NO, the single-company configuration characteristics are reestablished:

no company other than company 0 no department other than department 0 of company 0 no routing code other than code 0

no abbreviated number code other than code 0 If you select these conditions, you will have to make other modifications before you can delete the created names. This field is only changed from YES to NO in very rare circumstances. COM. CALL BETWEEN COMPANIES NO YES

This field is displayed if multi-company configuration is used. YES NO for a real multi-company configuration. this option means that the multi-company type is false: there is no consistency check carried out on the company extension numbers which can be in a call.

Page 68

11/2006

AMT/PTD/PBX/0053/2/2/EN

COM. DATA CALL BETWEEN COMPANIES NO YES

This field appears if multi-company configuration is selected: it authorises data transmission between the various companies. MULTI-SITE MANAGEMENT NO YES

Select YES to open multi-company configuration. CONSOLE TIME-OUT (SECONDS) Time-out duration set by a default as 600 seconds maximum (10 minutes). At the end of this period the idle menu is displayed automatically. CURRENT LANGUAGE LANGUAG E1 LANGUAG E2

Press the space bar to select the language you require. To begin with, only the current line is translated, then all the text in the menus. After this operation is complete, the shortcut commands change to correspond with the language selected (ESC + first letter of command). Example: ENGLISH Load session Delete field Delete repeated line Return to first menu Print menu First line of menu Go to next screen Last line of menu Select printout Select value Repetition Print all menus Previous element Add/Delete Begin Change session Agent log out element /Next Session Delete Clear Origin Hardcopy Begin More End Types Find Repeat Listing Previou / Next Yes Add / Delete First Jump Leave FRENCH Session Delete Clear Origin Hardcopy Begin More End Type Value Repeat Listing Previous /Next Yes Add/Delete Begin Jump Exit

Simple validation

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 69

INSTALL. NAME -------------------------This field is used to enter the name of your systems, using 24 ASCII characters. The system name is then displayed at the bottom of the screen and acts as a separator between the Menu part and the Title part on all screens. In remote operation (by Modem or X25 server), it reminds the operator of the site he is connected to. NUMBER OF RECORDS (CURRENT) (REQUESTED)

The storage buffers can hold a maximum of 128 records. The request is only taken into account after restarting the system: the current values then become equal to the requested values.

3.7

MULTI-SITE MANAGEMENT (MENU 3-7)


For the Call Manager (F5): Menu 3-5 (Multi-site management) Since the multi-site management functions are of great importance, they are not described in this manual, and are dealt with in a separate manual (reference PS10473*).

Page 70

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.8

SOFTWARE LOCK MANAGEMENT (MENU 3-8)


For the Call Manager (F5): Menu 3-6 (Software lock management).

On NeXspan C/S/L/D, this menu is menu 3-7 when the PBX is used with a mono-site configuration (see PARAMETER MANAGEMENT menu). On NeXspan C/S/L/D, this menu is menu 3-8 when the PBX is used with a multi-site configuration (see PARAMETER MANAGEMENT menu).

SOFTWARE LOCK MANAGEMENT 1 UNLOCK SA FUNCTIONS 2 DISPLAY SA FUNCTIONS ENTER YOUR CHOICE ---------------------------------------------

Figure 39: Menu 3-8 (Software lock management).

3.8.1

UNLOCK SA FUNCTIONS (MENU 3-8-1)


For the Call Manager (F5): Menu 3-6-1 (Unlock SA functions). This menu allows the installer to unlock the functions acquired by the customer (SA: Sales Administration)
SELECTION OF THE SA FUNCTION BY CODE by status --------------------------------------------...... ......

Figure 40: Selection of the SA function

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 71

BY CODE (FOR CALL MANAGER)

BASIC 10 IP TERMINALS 75 IP TERMINALS 200 IP TERMINALS 350 IP TERMINALS 500 IP TERMINALS 750 IP TERMINALS 960 IP TERMINALS 1500 IP TERMINALS 2250 IP TERMINALS 3000 IP TERMINALS 3750 IP TERMINALS CALL DIST

PREMIUM 25 IP TERMINALS 100 IP TERMINALS 250 IP TERMINALS 400 IP TERMINALS 600 IP TERMINALS 800 IP TERMINALS 1000 IP TERMINALS 1750 IP TERMINALS 2500 IP TERMINALS 3250 IP TERMINALS 4000 IP TERMINALS DIRECTORY 5000

PRIVILEGE 50 IP TERMINALS 150 IP TERMINALS 300 IP TERMINALS 450 IP TERMINALS 700 IP TERMINALS 900 IP TERMINALS 1250 IP TERMINALS 2000 IP TERMINALS 2750 IP TERMINALS 3500 IP TERMINALS

VOICE ENCRYPTION LISTEN/INTRUSION 16-DEVICE CSTA 128-DEVICE CSTA 1024-DEVICE CSTA FORWARD IAE

DIRECTORY 10000 8-DEVICE CSTA 64-DEVICE CSTA 512-DEVICE CSTA HOSPITAL/HOTEL

4-DEVICE CSTA 32-DEVICE CSTA 256-DEVICE CSTA 2048-DEVICE CSTA RECORD > 128 R4.2 < 501 IP R4.2 > 4000 IP Vers.B < 4001 IP Vers.C < 1001 IP Vers.D < 501 IP Vers.D > 4000 IP Vers.E < 4001 IP Vers.F < 1001 IP Vers.G < 501 IP Vers.G > 4001 IP Vers.H < 4001 IP Vers.I < 1001 IP Vers.J < 501 IP Vers.J > 4000 IP

IP/XML V.MAIL

ANA/XML V.MAIL R4.2 < 4001 IP Vers.B < 1001 IP Vers.C < 501 IP Vers.C > 4000 IP Vers.D < 4001 IP Vers.E < 1001 IP Vers.F < 501 IP Vers.F > 4000 IP Vers.G > 4001 IP Vers.H < 1001 IP Vers.I < 501 IP Vers.I > 4000 IP Vers.J < 4001 IP

R4.2 < 1001 IP Vers.B < 501 IP Vers.B > 4000 IP Vers.C < 4001 IP Vers.D < 1001 IP Vers.E < 501 IP Vers.E > 4000 IP Vers.F < 4001 IP Vers.G < 1001 IP Vers.H < 501 IP Vers.H > 4000 IP Vers.I < 4001 IP Vers.J < 1001 IP

Select a code.

Page 72

11/2006

AMT/PTD/PBX/0053/2/2/EN

USING ITS CODE (NEXSPAN C/S/L/D)


BASIC HOPITAL/HOTEL LCR MULTISITE CSTA 16 OBJETS CSTA 128 OBJETS CSTA 1024 OBJETS INTERACTIVITE BVI M.VOCALE ANA/XML SVI V24 8 ACCES SVI V24 S2 64 ACCES SVI Q23 2 ACCES SVI Q23 16 ACCES SVI Q23 + 2 ACCES SVI Q23 + 16 ACCES SGML/PO 2 SESSIONS SGML/PO 16 SESSIONS 10 TERMINAUX IP 75 TERMINAUX IP 200 TERMINAUX IP 350 TERMINAUX IP 500 TERMINAUX IP R4.2 XC Vers.B XC Vers.C XC Vers.D XC Vers.E XC Vers.F XC Vers.G XC Vers.H XC Vers.I XC Vers.J XC SVI Q23 4 ACCES SVI Q23 32 ACCES SVI Q23 + 4 ACCES SVI Q23 + 32 ACCES SGML/PO 4 SESSIONS SGML/PO 32 SESSIONS 25 TERMINAUX IP 100 TERMINAUX IP 250 TERMINAUX IP 400 TERMINAUX IP CHIFFREMENT VOIX R4.2 XS Vers.B XS Vers.C XS Vers.D XS Vers.E XS Vers.F XS Vers.G XS Vers.H XS Vers.I XS Vers.J XS R4.2 XL/XD Vers.B XL/XD Vers.C XL/XD Vers.D XL/XD Vers.E XL/XD Vers.F XL/XD Vers.G XL/XD Vers.H XL/XD Vers.I XL/XD Vers.J XL/XD SVI Q23 8 ACCES SVI Q23 64 ACCES SVI Q23 + 8 ACCES SVI Q23 + 64 ACCES SGML/PO 8 SESSIONS SGML/PO 64 SESSIONS 50 TERMINAUX IP 150 TERMINAUX IP 300 TERMINAUX IP 450 TERMINAUX IP PREMIUM IAE_DE_RENVOI DISA PRIVILEGE ACCUEIL TICKETS>128 CSTA 4 OBJETS CSTA 32 OBJETS CSTA 256 OBJETS CSTA 2048 OBJETS STANDARD AUTO SVI V24 2 ACCES SVI V24 16 ACCES ECOUTE/INTERVENTION AVS2000 CSTA 8 OBJETS CSTA 64 OBJETS CSTA 512 OBJETS BVI MVOCALE IP/XML SVI V24 4 ACCES SVI V24 S2 32 ACCES

Select a code.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 73

BY STATUS LOCK CLE CARD ALLOWED UNLOCK

Select a status. LOCK CLE CARD ALLOWED UNLOCK indicates all statuses. functions are not open and have no key code. the key code is entered (function not available). functions are allowed. functions are unlocked and the key is entered.

UNLOCK HOSPITAL/HOTEL FUNCTION


UNLOCK HOSPITAL/HOTEL

ID NUMBER - STATUS OF FUNCTION - KEY LIST OF ELEMENTARY FEATURES: Multi-user EAI CONFIDENT. CODE EAI

0100080000589F LOCK ..............

PRE-PAYMENT EAI

----------------------------------------------Figure 41: Unlock hospital/hotel ID NUMBER Corresponds to the machine identification number (code stored in the dongle). STATUS OF FUNCTION LOCK CLE CAR D ALLOWED UNLOCK

Used to select the status of SA functions. LOCK indicates all statuses. functions are not open and have no key code.

CLE CARD the key code is entered (function not available). ALLOWED functions are allowed when there is a demonstration dongle installed. UNLOCK functions are unlocked and the key is entered.

LIST OF ELEMENTARY FEATURES The list of elementary features which are part of the function.

Page 74

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.8.2

DISPLAY SA FUNCTIONS (MENU 3-8-2)


For the Call Manager (F5): Menu 3-6-2 (Display SA functions).
DISPLAY SA FUNCTIONS

FUNCTION STATUS ---------------------------------------HOSPITAL/HOTEL ALLOWED FORWARD IAE ALLOWED C. DIST. ALLOWED LISTEN/INTERVENTION ALLOWED LCR ALLOWED DISA ALLOWED RECORD > 128 BYTES ALLOWED AVS2000 ALLOWED MULTISITE ALLOWED 4-DEVISE CSTA ALLOWED 8-DEVISE CSTA ALLOWED 16-DEVISE CSTA ALLOWED 32-DEVISE CSTA ALLOWED 64-DEVISE CSTA ALLOWED ---------------------------------------Figure 42: Display SA functions (F6)
DISPLAY SA FUNCTIONS

128-DEVISE CSTA 256-DEVISE CSTA 512-DEVISE CSTA 1024-DEVISE CSTA 2048-DEVISE CSTA IVB IVB INTERACTIVITY AUTOMATIC OPERATOR IP/XML V.MAIL ANA/XML V.MAIL IVS V24 2 ACCESSES IVS V24 4 ACCESSES IVS V24 8 ACCESSES IVS V24 16 ACCESSES IVS V24 S2 32 ACCESSES IVS V24 S2 64 ACCESSES

ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED

---------------------------------------Figure 43: Display SA functions (F6) (continued)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 75

DISPLAY SA FUNCTIONS

IVS DTMF 2 ACCESSES IVS DTMF 4 ACCESSES IVS DTMF 8 ACCESSES IVS DTMF 16 ACCESSES IVS DTMF 32 ACCESSES IVS DTMF 64 ACCESSES IVS DTMF+ 2 ACCESSES IVS DTMF+ 4 ACCESSES IVS DTMF+ 8 ACCESSES IVS DTMF+ 16 ACCESSES IVS DTMF+ 32 ACCESSES IVS DTMF+ 64 ACCESSES SGML/OPCO 2 SESSIONS SGML/OPCO 4 SESSIONS SGML/OPCO 8 SESSIONS SGML/OPCO 16 SESSIONS

ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED

---------------------------------------Figure 44: Display SA functions (F6) (continued)


DISPLAY SA FUNCTIONS

SGML/OPCO 32 SESSIONS SGML/OPCO 64 SESSIONS 10 IP TERMINALS 25 IP TERMINALS 50 IP TERMINALS 75 IP TERMINALS 100 IP TERMINALS 150 IP TERMINALS 200 IP TERMINALS 250 IP TERMINALS 300 IP TERMINALS 350 IP TERMINALS 400 IP TERMINALS 450 IP TERMINALS 500 IP TERMINALS

ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED ALLOWED

---------------------------------------Figure 45: Display SA functions (F6) (continued)

Page 76

11/2006

AMT/PTD/PBX/0053/2/2/EN

3.9

INTEGR. BUFFER MANAGEMENT (MENU 3-9)


For the Call Manager (F5): this menu is not available.
INTEGR. BUFFER MANAGEMENT 1 PARAMETER MANAGEMENT 2 RESET FLASH ENTER YOUR CHOICE .

--------------------------------------------------

Figure 46: Menu 3-9 (Integrated buffer management)

3.9.1

PARAMETER MANAGEMENT (MENU 3-9-1)


For the Call Manager (F5): this menu is not available.
PARAMETER MANAGEMENT FUNCTIONAL STATUS STAT: OPERATIONAL mode MODE: NORMAL TOTAL MEMORY CAPACITY SIZE REQUIRED FOR BACKUP MUFACT CALL NUMBER MUFACT CALL PROFILE START/END MARKER SUSPENDED FALLBACK (Fold) 6 MB 2 MB .

Figure 47: Integr. buffer parameter management (1)

PARAMETER MANAGEMENT STORAGE BLOCKS OF RECORD TYPES - TELEPHONY TYPE - PACKET DATA TYPE - CIRCUIT DATA TYPE - SERVICE TYPE (AND ALARMS) - MONITORING TYPE - MONITORING TYPE BLOCK n CHARACTERISTICS - TOTAL SIZE (KB) - FALLBACK MODE SIZE (KB) - FILLING RATE (%) - MANAGEMENT MODE - SATURATION THRESHOLD(%) DELETE ALL RECORDS BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK 6 MB 2 MB 50 . 75 YES 0 1 2 3 4 5

Figure 48: Integr. buffer parameter management (2) These screens are used to configure the integrated buffer and in particular the different file blocks it contains.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 77

FUNCTIONAL STATUS STATUS OPERATIONAL mode SUSPENDED

Select a functional status for the integrated buffer. Note : You must select the status SUSPENDED if you want to modify the integrated buffer parameters. MODE NORMAL FALLBACK EST FALLBACK IN PROG.

Select a mode for the integrated buffer. MUFACT CALL NUMBER Enter a directory number. MUFACT CALL PROFILE Enter the record type. START/END MARKER NO YES

Select YES to validate the presence of a start marker and an end marker. STORAGE BLOCKS OF RECORD TYPES Note : There can only be one record type in a single storage block.

- TELEPHONY TYPE Enter the storage block for the call records. - PACKET DATA TYPE Enter the storage block for the packet data communication records. - CIRCUIT DATA TYPE Enter the storage block for the circuit data communication records. - SERVICE TYPE (AND ALARMS) Enter the storage block for the service records. - SUPERVISION TYPE Enter the storage block for the supervision records.

Page 78

11/2006

AMT/PTD/PBX/0053/2/2/EN

- OBSERVATION TYPE Enter the storage block for the observation records. BLOC N CHARACTERISTICS (0 TO 5) - TOTAL SIZE Enter the total size of the buffer (in Kbytes). - SIZE IN FALLBACK MODE Enter the size of the buffer in fallback mode (in Kbytes). Note : The fallback size is the reduced size of the block, to enable software downloading.

- FILLING RATE Enter the saturation rate as a percentage. - MANAGEMENT MODE PERM. CONNECTION NON PERM. CONNECTION

Enter the block management mode. - SATURATION THRESHOLD Enter the saturation threshold as a percentage (by default, 75%). DELETE ALL RECORDS NO YES

If you select YES, all records are deleted. Note : You must confirm the operation by entering the Installer password.

3.9.2

RESET FLASH (MENU 3-9-2)


For the Call Manager (F5): this menu is not available. RESET INTEGRATED BUFFER FLASH PASSWORD INSTA

Figure 49: Reset flash When you validate the password, a reset of the flash memory on the integrated buffer is activated: the message "Reset requested" appears.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 79

4.

OPERATION ADMINISTRATION (MENU 4)

OPERATION ADMINISTRATION ADMINISTRATION PASSWORD .....

Figure 50: Administration password

OPERATION ADMINISTRATION 1 2 3 4 5 6 7 8 ADMINISTRATION PARAMETERS OVERALL DISPLAY OF CHARGE COUNTERS CHARGING OF INDIVIDUAL SUBSCRIBERS LOGBOOK DISPLAY DELETE LOGBOOK DISPLAY STATUSES TRAFFIC OBSERVATION STARTUP MONITORING

ENTER YOUR CHOICE

Figure 51: Menu 4 (Operation administration). For Call Manager (F5): Menu 4 (Operation administration). Menu 4-8 is not available for Call Manager (F5).

Page 80

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.1

ADMINISTRATION PARAMETERS (MENU 4-1)


For the Call Manager (F5): Menu 4-1 (Administration parameters). ADMINISTRATION PARAMETERS ------ PRE-PAYMENT PARAMETERS ------IN CURRENCY UNIT - CREDIT AND CHARGE UNIT (ROUNDED) 1/10 - CUMULATIVE SUM (ROUNDED OFF) 1 No. OF DECIMALS DISPLAYED 2 CHARGE UNIT PRICE 0.00.... . EURO/NATIONAL CURRENCY 6.55957. ---------- CHARGE RECORDS --------USE OF FORMAT 4500 NO STEP BY STEP DEFINITION OUTPUT CHANNEL SITE NUMBER OVERRIDDEN IN RECORD ...

---------------------------------------Figure 52: Menu 4-1 (Administration parameters). PREPAYMENT PARAMETERS IN CURRENCY UNIT CREDIT AND CHARGE UNIT (ROUNDED) 1/10 1 10 100 1/100 1/20

Select the measuring scale before modifying the prepayment counters. In countries where the monetary unit is divisible by 100, the unit charge can be expressed in hundredths (1/100), rounded off to 5 hundredths (1/20) or to 10 hundredths (1/10). CUMULATIVE SUM (ROUNDED OFF) 1 10 100 1/100 1/20 1/10

Select the rounded off cumulative sums. for example, to round off to the nearest euro, enter 1; to the nearest cent, enter 1/100 etc. The cumulative prepayment instalments is displayed in menu 4-3: Charging of individual subscribers. NO. OF DECIMALS DISPLAYED Value between 0 and 4. This field defines the display format for the various amounts, independently from the specified value to be rounded off to. You must check the consistency of your request. In the USA, for example, if the unit charge is rounded off to the nearest cent, 2 decimals must be displayed.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 81

CHARGE UNIT PRICE Enter in this field the price per charge unit. If the value 1/100 is selected in the field "Credit and charge unit (rounded)", enter 0.75 to indicate a unit of 75 cents. . EURO/NATIONAL CURRENCY CONVER. The Euro value is given in 6 figures (7 characters with a decimal point). CHARGE RECORDS USE OF FORMAT 4500 NO YES

If you enter YES, the record format can either be printed or processed by SMDR. STEP BY STEP DEFINITION SMDR PRINTER on a single line in format 4500. on several lines in format 4500.

The above parameters only appear if you have selected YES in the previous line. OUTPUT CHANNEL Billing data output is carried out on the CPU card serial port in format 6500 . If you are using PAD link, records are processed by an asynchronous link connected to the KITAXE or MUFACT server, in "format 6500".

PAD LINK

ATTENTION : If the message "SMDR active" is displayed, set the parameters as follows: ------------------------------Call records----------------------Step by step output NO ------------------------------Data records-------------------------Output packet data NO Output circuit data NO ------------------------------Service record output--------------------Agenda/alarm family Loggbook Prepayment family Logbook .. Roaming family Logbook ------------------------------Monitoring records------------------------Step by step output NO ------------------------------Alarm management--------------------Generation of a service record NO ---------------------------------------------------------------------------------Step by step definition OUTPUT CHANNEL

PRINT HEADER ZZ 40 characters

Page 82

11/2006

AMT/PTD/PBX/0053/2/2/EN

PRINT FOOTER 40 characters These fields are used to customise records on the printer for output in format 4500. The same fields can also be used in the case of an OXAL charge meter to note the ZZ synchronisation characters (only format 4500 and step by step: PRINTER are visible). The printed record is in the following form:

BEACH HOTEL 10:30 11/07/98 PHONE 20 FROM 19:30 08/07 COST 25.50 COST (EURO) 3.92

THANKS FOR YOUR VISIT PLEASE CALL AGAIN

The field displaying the cost in Euros is not featured if the Euro value is not assigned. SITE NUMBER OVERRIDDEN IN RECORD The site number overridden by the record. ADMINISTRATION PARAMETERS --------- CALL RECORDS -------STEP BY STEP OUTPUT YES OUTPUT FORMAT EXTENDED FORMAT V1 TRUNK IDENTIFIED BY CARD/CHANNEL TRUNCATE LAST 4 DIGITS YES CALL TYPE INCOMING AND OUTGOING DELETE RECORDS W/OUT CHARGING NO --------- DATA RECORDS ----------OUTPUT PACKET DATA OUTPUT CIRCUIT DATA NO NO

---------------------------------------Figure 53: Administration parameters (continued) CALL RECORDS STEP BY STEP OUTPUT NO YES

If you enter YES, all charged and non-charged call records (according to the parameter "delete records w/out charging") are output on the printer or on the PAD LINK, by means of the Kitaxe or Mufact call (with the sub-address for the PAD). If you enter NO, the records are not printed out.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 83

OUTPUT FORMAT EXTENDED FORMAT V0 EXTENDED FORMAT V2 (112 characters) (210 characters) EXTENDED FORMAT V1 EXTENDED FORMAT V3 (128 characters) (256 characters)

Enter the output format (V0, V1, V2, or V3). TRUNK IDENTIFIED BY CARD/CHANNEL CARD/CHANNE L EQUIPMENT TRUNCATE LAST 4 DIGITS NO YES EQUIPMENT Number of the card and equipment channel. NTL (logic terminal number): see menu 1-2-5 (Display trunks) for the number correspondence.

If you enter YES, the last 4 digits of the number dialled are masked. CALL TYPE INCOM. AND OUTGO. INCOMING OUTGOING

Which call records are print out in real time. Real time (step by step) output must be validated. INCOM. AND OUTGO. INCOMING OUTGOING DELETE RECORDS W/OUT CHARGING NO YES If you select YES, incoming calls will also be deleted. Incoming and outgoing calls are printed out. Incoming calls are printed out. Outgoing calls are printed out.

CAUTION:

DATA RECORDS OUTPUT PACKET DATA NO YES

Data record output is only available in format 6500 by means of the Kitaxe or Mufact call with the sub-address 10. If you enter YES, the field "Output format" is displayed.

Page 84

11/2006

AMT/PTD/PBX/0053/2/2/EN

OUTPUT CIRCUIT DATA NO YES

Data record output is only available in format 6500 by means of the Kitaxe or Mufact call with the sub-address 20. If you enter YES, the field "Output format" is displayed. ADMINISTRATION PARAMETERS ------ SERVICE RECORD OUTPUT ------OUTPUT FORMAT EXTENDED FORMAT V1 AGENDA/ALARM FAMILY LOGBOOK PREPAYMENT FAMILY LOGBOOK MONITORING FAMILY LOGBOOK FEATURE FAMILY LOGBOOK C.DIST. FAMILY LOGBOOK ROAMING FAMILY STEP BY STEP TRUNK IDENTIFIED BY CARD/CHANNEL ---------------------------------------Figure 54: Administration parameters (continued) SERVICE RECORD OUTPUT OUTPUT FORMAT EXTENDED FORMAT (112 characters) V0 Enter the output format (V0 or V1). AGENDA/ALARM FAMILY LOG BOOK PROGRESSIVEL Y STEP BY STEP AND LOG DUMMY EXTENDED FORMAT V1 (128 characters)

LOG BOOK

Enables all wake-up services to be used as output from the logbook: wake-up programming, wake-up cancellation, wake-up, no answer to wake-up. Same function as described above with a link on the output channel or PAD, by means of the Kitaxe or Mufact call with the sub-address 30. Same function as described above, with a link on the output channel or PAD by means of the Kitaxe or Mufact call with the sub-address 30. Wake-up call data is not acknowledged by the PBX.

PROGRESSIVELY

STEP BY STEP AND LOG DUMMY PREPAYMENT FAMILY LOG BOOK

PROGRESSIVEL Y

STEP BY STEP AND LOG

DUMMY

Prepayment processing: credit, prepayment balance, end of current balance.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 85

MONITORING FAMILY LOG BOOK PROGRESSIVEL Y STEP BY STEP AND LOG DUMMY

Message output when the TRACE key is pressed (nuisance call). Message output for a long call (parameter 38 - Menu 1-7-2 Miscellaneous Parameters). FEATURE FAMILY LOG BOOK PROGRESSIVEL Y STEP BY STEP AND LOG DUMMY

Indicator for validated or cancelled message in home automation function message lamp on set. C.DIST. FAMILY LOG BOOK PROGRESSIVEL Y STEP BY STEP AND LOG DUMMY

Message output on the call distribution set in or out of service (or on a set in a hunt group). Printout example: 3 CV 95 05 04 103450 01A 33 66

CV : VEILLEUSE CH : Hors Veilleuse

POSTE DEMANDEUR DE l'action POSTE En/Hors Veilleuse

ROAMING FAMILY

DAT E

H / MN / S

LOG BOOK

PROGRESSIVEL Y

STEP BY STEP AND LOG

DUMMY

Message output used for monitoring a mobile phone. The roaming record is a tool used to observe the operation of DECT terminals. Printout example: 3 LL 3 LL A. C S 960320184349 01 = = = = = A. 765432 C 123 S L CR LF 100 CR LF

Service ticket Wireless service CDR - Roaming Subscriber Cell Status (roaming, G = Mislaid, P = Lost)

Page 86

11/2006

AMT/PTD/PBX/0053/2/2/EN

TRUNK IDENTIFIED BY CARD/CHANNEL EQUIPMENT

This field determines whether the record is printed with the circuit number or with the card and channel number. ADMINISTRATION PARAMETERS -------- MONITORING RECORDS -------STEP BY STEP OUTPUT YES ---- SUBSCRIBER MANAGEMENT CALL TYPE INCOMING AND OUTGOING ---- JUNCTOR MANAGEMENT TRUNK IDENTIFIED BY CARD/CHANNEL CALL TYPE INCOMING AND OUTGOING - "SELECTION" PHASE YES - "RINGING" PHASE YES - "SPEECH" PHASE YES - "RELEASE" PHASE YES -------- MONITORING TICKETS -------MONITORING TICKET GENERATION NO ---------------------------------------Figure 55: Administration parameters (continued) MONITORING RECORDS STEP BY STEP OUTPUT (IF SIMPLE OR EXTENDED FORMAT) NO YES

Select YES to output monitoring records for subscribers and/or lines by means of the Kitaxe or Mufact server with the sub-address 40. This selection depends on the selections made in the following fields. SUBSCRIBER MANAGEMENT CALL TYPE INCOM. AND OUTGO. INCOMING OUTGOING

Monitoring is possible according to the call type and for each subscriber. To implement monitoring, validate the SUBSCRIBER MONITORING (RECORDS) line as YES in the menu: Extension characteristics. JUNCTOR MANAGEMENT TRUNK IDENTIFIED BY See explanation above. A record can be printed for each transition: Selection, Ringing, Conversation, Release. This field displays the transitions on a line or TS. For each line or TS (menu 1-2-4), validate "Transitions monitoring" by entering YES.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 87

OBSERVATION RECORDS GENERATING OBSERVATION RECORDS NO YES

YES validates output of a data observation ticket. ADMINISTRATION PARAMETERS ------- ALARM MANAGEMENT --------- GENERATION OF A SERVICE RECORD NO - MONITOR TEL. EXTENSION YES - REPORTED TO NUMBER 78669. - AND ACKNOWLEDGED BY CODE .... - TO CENTRALIZING SITE YES - SITE ........ - SITE ........ SNMP MANAGER IP ADDRESS ............... X25 ADDRESS No 1 X25 ADDRESS No 2 .................... ....................

---------------------------------------Figure 56: Administration parameters (continued) ALARM MANAGEMENT GENERATION OF A SERVICE TICKET NO YES

Alarm record output on the printer or PAD is only possible in format 6500. SUPERVISION ON TEL. EXT. NO YES

This field is used to monitor alarms on the ATDC or digital set. The digital set must be declared as a maintenance set in Extension characteristics (menu 1-1-1). Alarm management must also be authorised in menu 1-7-2. REPORTED TO NUMBER Enter in this field the directory number of the local or remote set which is activated on reception of alarm signal (only the dry loop alarm). AND ACKNOWLEDGED BY CODE This is used to program the acknowledgement code indicating reception of an alarm by the internal or remote set.

Page 88

11/2006

AMT/PTD/PBX/0053/2/2/EN

TO CENTRALISING SITE (MULTI SITE OPERATION) NO YES

Select YES to retransmit alarms to existing remote sites. SITE Enter the name(s) of the existing site(s). SNMP MANAGER IP ADDRESS Enter the SNMP manager IP address: field of 15 characters in standard format for an IP address, made up of 4 decimal values and separated by decimal points: If the IP address is modified, a message is sent to the SNMP requesting information. SNMP MANAGER CARD SLOT This indicates in 2 characters (cabinet, card) the location of the PTx card which is forwarding alarms: this location is only displayed if the information indicated is not 0. X25 ADDRESS NO. 1 AND NO. 2 Enter the X25 address number of the integrated buffer monitor. - NUMBER OF ATTEMPTS Enter the number of authorised attempts. - DELAY BETWEEN ATTEMPTS Enter in minutes the delay between two authorised attempts. ALARM VALIDATION PARAMETRES DE SUIVI ------- VALIDATION DES ALARMES --------GESTION ALARME BOUCLE SECHE 0 OUI - LABEL: DRY LOOP ALARM 0...... - DEBUT ALARME SI BOUCLE OUVERTE OUI GESTION ALARME BOUCLE SECHE 1 OUI - LABEL: DRY LOOP ALARM 1...... - DEBUT ALARME SI BOUCLE OUVERTE OUI GESTION ALARME BOUCLE SECHE 2 OUI - LABEL: DRY LOOP ALARM 2...... - DEBUT ALARME SI BOUCLE OUVERTE OUI GESTION ALARME BOUCLE SECHE 3 OUI - LABEL: DRY LOOP ALARM 3...... - DEBUT ALARME SI BOUCLE OUVERTE OUI POSTES EN PARKING NOTES DANS JDB OUI SORTIE JOURNAL SUR IMPRIMANTE NON ---------------------------------------Figure 57: Administration parameters (continued - alarm validation on F6)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 89

ADMINISTRATION PARAMETERS ------- ALARM VALIDATION --------alarm management STANDARD S10-20 DRY LOOP ALARM MANAGEMENT - ALARM BEGIN. IF OPEN LOOP LOGBOOK OUTPUT ON PRINTER YES YES NO NO

---------------------------------------Figure 58: Administration parameters (continued - alarm validation on F5) DRY LOOP ALARM MANAGEMENT NO YES

If you enter YES, an alarm is set off when 50% of the external trunk lines in service are faulty. Note : You can generate 4 dry loops on F6.

- ALARM BEGIN. IF OPEN LOOP NO YES

IMPORTANT : This line is only displayed if the "Dry loop alarm management" field is set to YES. This line is used to configure the alarm direction. On F6, there are 4 "dry loop" relays that can return an alarm. The nature of the alarms varies and depends on the physical connection made to these relays: a connection may start an alarm when the loop is closed and stop the alarm when the loop is opened. Select YES so that an alarm starts when the loop is opened (and stops when the loop is closed) and select NO so that an alarm starts when the loop is closed (and stops when the loop is opened). RECORD PARKED EXTENSIONS IN LOGBOOK NO YES

If you enter YES, parked sets are recorded in the logbook; if you enter NO, there in no logbook output. LOGBOOK OUTPUT ON PRINTER NO YES

Select YES to obtain step by step logbook output on a printer. Note : Since the logbook is of a limited size, it is recommended not to congest it with messages which simply show that digital sets are not connected to a card (sub-equipping).

Page 90

11/2006

AMT/PTD/PBX/0053/2/2/EN

SITE DEGRADATION STATE ADMINISTRATION PARAMETERS

SITE DEGRADATION STATE

- TAKE ACCOUNT OF THE DISABLE STATE YES ---------------------------------------Figure 59 : Administration parameters (site degradation state)

TAKE ACCOUNT OF THE DISABLE STATE. NO YES

This menu allows to configure the calculation mode of the site profile gravity. If you enter YES, the state under operator is taken into account in the calculation of the gravity profile. This modification is important because it makes it possible not to degrade the state of the site for a PBX which has boards unused.

Note : On a starting in MCONF mode, the state under operator is not taken into account in the calculation of the gravity profile, this allows to have a NORMAL state site with unused or under operator boards. Note : On a starting in TOTAL mode, the state under operator is taken into account in the calculation of the gravity profile, thus the PBX is seen degraded with unused or under operator boards.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 91

4.2

OVERALL DISPLAY OF CHARGE COUNTERS (MENU 4-2)


For the Call Manager (F5): Menu 4-2 (Overall display of charge counters). Levels 2 (Display trunk line counters), 3 (Display trunk group counters), and 4 (Display operator console counters) are not available. OVERALL CHARGE DATA 1 2 3 4 5 6 DISPLAY EXTENSION COUNTERS DISPLAY TRUNK LINE COUNTERS DISPLAY TRUNK GROUP COUNTERS DISPLAY OPERATOR CONSOLE COUNTERS DISPLAY DEPARTMENT COUNTERS RESET COUNTERS

ENTER YOUR CHOICE ---------------------------------------Figure 60: Overall charge data (F6) OVERALL CHARGE DATA 1 DISPLAY EXTENSION COUNTERS 2 DISPLAY DEPARTMENT COUNTERS 3 RESET COUNTERS ENTER YOUR CHOICE ---------------------------------------Figure 61: Overall charge data (F5) Note : The service counters can only be displayed in multi-company configuration.

Page 92

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.2.1

DISPLAY EXTENSION COUNTERS (MENU 4-2-1)


For the Call Manager (F5): Menu 4-2-1 (Display extension counters). DISPLAY EXTENSION COUNTERS COMPANY SELECTION ******** ... ......

DISPLAYED COUNTERS THRESHOLD DIRECTORY BEGINNING WITH

---------------------------------------Figure 62: Display extension meters COMPANY SELECTION xxxxxxxx CMPNY.0

This field only appears if the multi-company configuration is selected. Select xxxxxxx to display the extension counters for all companies and departments. If you have already created company names, these are displayed here. DISPLAYED COUNTERS THRESHOLD Counter threshold number: the threshold criterion is used to display extension counters the entered threshold value. DIRECTORY BEGINNING WITH Enter a digit (or number). All directory numbers that start with this digit (or number) will be displayed. EXTEN. COUNTERS DN SUBSC. NAME SINCE CU ---------------------------------------74021 FORRAINE C 00/00 0 74050 06/01 0 74070 00/00 0 74080 GENERAL PURPOSE JP 00/00 74095 00/00 0 74096 00/00 0 74261 LOUIS V 00/00 10 74640 BOUDARD T 00/00 4 74669 MARTIN B 00/00 57 INCOMPLETE DISPLAY 1000/2000 ---------------------------------------10 USERS CUMULATED CU 71 ---------------------------------------Figure 63: Extension counters

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 93

EXTEN. COUNTERS This screen displays all the counters for all the extensions connected to the PBX. You cannot modify this information. As of release R4.1, it is possible to display 4000 subscribers on a Call Manager (F5). The table shows:

the directory number the subscriber number the date of the last reset of the charge counter (DAY/MONTH) the number of CUs (Charge Units) the number of extensions connected to the PBX the total number of CUs for all extensions

Note : The "Incomplete display" line is an information line indicating that a certain number of subscribers are not displayed (display menu limited to 1000 lines). All directory numbers are in this list, including secondary numbers for multi-line sets and ISDN sets on S0 bus.

4.2.2

DISPLAY TRUNK LINE COUNTERS (MENU 4-2-2)


For the Call Manager (F5): this menu is not available. DISPLAY TRUNK LINE COUNTERS DISPLAYED COUNTERS THRESHOLD FIRST PHYSICAL EQUIPMENT 10. 00101

-----------------------------------------DISPLAYED COUNTERS THRESHOLD Counter threshold number: the threshold criterion is used to display trunk line counters equal to or greater than the entered threshold value.

Page 94

11/2006

AMT/PTD/PBX/0053/2/2/EN

FIRST PHYSICAL EQUIPMENT The trunk line counters are displayed starting with the first position indicated. DISPLAY TRUNK LINE COUNTERS EQT ACCESS TR. GP SINCE: C.U. ---------------------------------------------0-02-03 :236 FT0-ETSI 09/04 269 0-02-03 :236 FT0-ETSI 09/04 2 0-03-00 :240 FT0-ETSI 00/00 29 0-03-00 :241 FT0-ETSI 00/00 29 0-03-01 :244 FT0-ETSI 00/00 33 0-03-01 :245 FT0-ETSI 00/00 33 1-00-00 :000 VOIP.TG 00/00 33 1-00-01 :001 VOIP.TG 00/00 33 1-00-02 :002 VOIP.TG 00/00 33 1-00-03 :003 VOIP.TG 00/00 34 1-00-04 :064 VOIP.TG 00/00 28 1-00-05 :065 VOIP.TG 00/00 30 1-00-06 :066 VOIP.TG 00/00 32 1-00-07 :067 VOIP.TG 00/00 33 ---------------------------------------------Figure 64: Display of trunk line counters (F6) This screen displays all trunk lines (analogue, ISDN, and PCM) connected to the PBX. You cannot modify this information. This screen shows:

the equipment location and access the trunk group to which the external trunk line belongs the date of the last reset of the charge counter (DAY/MONTH) the number of CUs (Charge Units)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 95

4.2.3

DISPLAY TRUNK GROUP COUNTERS (MENU 4-2-3)


For the Call Manager (F5): this menu is not available. DISPLAY TRUNK GROUP COUNTERS trunk group NO. LINES: SINCE: C.U. ---------------------------------------------FT0-ETSI 2 00/00 271 VOIP.TG 30 00/00 474 ---------------------------------------------Figure 65: Display trunk group counters (F6) This menu is used to display all trunk groups declared in the PBX. You cannot modify this information. This screen shows:


4.2.4

the trunk group name the number of lines, the date of the last reset of the charge counter (DAY/MONTH) the number of CUs (Charge Units)

DISPLAY OPERATOR CONSOLE COUNTERS (MENU 4-2-4)


For the Call Manager (F5): this menu is not available.
DISPLAY OPERATOR CONSOLE COUNTERS

No. SINCE: C.U. -----------------------------------------------------------------------------Figure 66: Display operator console counters This screen displays the counters of the operator consoles declared in the PBX. You cannot modify this information. This screen shows:

the operator console directory number the date of the last reset of the charge counter (DAY/MONTH) the number of CUs (Charge Units)

Page 96

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.2.5

DISPLAY DEPARTMENT COUNTERS (MENU 4-2-5)


For the Call Manager (F5): Menu 4-2-2 (Display department counters).
DISPLAY DEPARTMENT COUNTERS

COMPANY DEPARTMENT NB DN SINCE: C.U. --------------------------------------------COMPANY DEPT 0 46 00/00 740 ----------------------------------------------Figure 67: Display department counters This screen displays all counters by company/department pair declared in the PBX. You cannot modify this information. The table shows:

the company name the department name, or for "all other departments" the number of extensions in the department the date of the last reset of the charge counter (DAY/MONTH) the number of CUs (Charge Units)

Note : The department counters can only be displayed in multi-company configuration.

4.2.6

RESET COUNTERS (MENU 4-2-6)


For the Call Manager (F5): Menu 4-2-3 (Reset counters).
SELECTION OF COUNTERS TO BE RESET

EXTENSION AND DEPARTMENT COUNTERS OF COMPANY OPERATOR COUNTERS RESERVED FOR OPERATOR NETWORK AND TRUNK GP COUNTERS OF TRUNK GROUP

YES ******** YES ........ YES ........

----------------------------------------------Figure 68: Selection of counters to be reset There are 3 types of counters which can be reset:

extension and department counters: of company operator counters: reserved for operator network and trunk GP counters: of trunk group

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 97

You can also select the extension and department counters associated with company x, the operator counters reserved for operator y, and the network counters of trunk group z.
COUNTERS RESET

CHARGE PASSWORD

.....

----------------------------------------------Figure 69: Reset counter password


COUNTERS RESET

COUNTER TABLES HAVE BEEN RESET ----------------------------------------------Figure 70: Message indicating that the counters have been reset

Page 98

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.3

CHARGING OF INDIVIDUAL SUBSCRIBERS (MENU 4-3)


For the Call Manager (F5): Menu 4-3 (Charging of individual subscribers).
SELECTION OF AN EXTENSION

DIRECTORY NUMBER

......

----------------------------------------------Figure 71: Menu 4-3 (Directory number selection) DIRECTORY NUMBER The extension is accessed by its directory number. When you validate this number the following screen is displayed:
CHARGING SUBSCRIBER 303

PREPAYMENT EXTENSION WITH PREPAYMENT EXTENSION WITH MULTI-CHARGING ACCOUNT CLOSED balance CUMULATED INSTALMENTS AMOUNT TO PAY DATE OF LAST RESET COUNTER VALUE COUNTER RESET

NO NO YES 0.00...... 0.00...... .......... 08/01 23:08 0 NO

----------------------------------------------Figure 72: Charging subscriber 28 PREPAYMENT EXTENSION WITH PREPAYMENT NO YES

If you enter YES, the set will have the prepayment feature. In this case, a credit allowance in euros can be assigned to it: this credit allowance is reduced as each charge unit is recorded (call limitation). If you enter NO, the set will not have the prepayment feature: it is not, therefore, affected by a credit sum (no call limitation). EXTENSION WITH MULTI-CHARGING NO YES

Enter YES for multi-user extensions: users must then enter their password for outgoing calls.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 99

ACCOUNT CLOSED NO YES

If you enter YES, the account corresponding to the set is closed. If you enter NO, the account corresponding to the set is in credit. Note : A closed account can be set to NO even if the account has been credited. In this case, the lines BALANCE and CUMULATED INSTALMENTS are reset (for a customer wishing to settle his bill).

BALANCE This field is reset when an amount is displayed on the line AMOUNT TO PAY: this balance is reduced as calls are made. CUMULATED INSTALMENTS This field gives the total of the amounts displayed on the line AMOUNT TO PAY. AMOUNT TO PAY Enter the amount (maximum 4 digits) of credit the set is allowed. After validating, the amount is displayed in "Balance": the "Account Closed" field changes to NO. DATE OF LAST RESET This field indicates the date (dd/mm) and time (hh/mm) of the last reset of extension counter. COUNTER VALUE This field indicates the total number of CUs (Charge Units) recorded for the extension. COUNTER RESET NO YES

If you enter NO, the counter is not reset. If you enter YES, the counter is reset (total number of CUs recorded). Note : If the prepayment feature is used, the PBX requests the ISDN network to continually retransmit charge units. The calls made are increased by one charge unit, corresponding to activation of this service (unless this service is part of the subscription). By default, when the user's balance falls below n currency units during a call, 3 beeps are emitted every 7 seconds to warn the user that the call will soon be cut off (see parameter 9 in table 56). The prepayment feature is not used with ISDN sets.

Page 100

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.4

LOGBOOK DISPLAY (MENU 4-4)


For the Call Manager (F5): Menu 4-4 (Logbook display). LOG BOOK 13:22:25 **SVF-BVF: 13:23:45 **SVF-BVF: 13:30:18 **SVF-BVF: 13:32:12 **SVF-BVF: PAGE 19/19 14/12/04 2 0-06- **OUT OF SRV** 14/12/04 2 0-06- **IN SERVICE** 14/12/04 2 0-06- **DOWNLOAD** 14/12/04 2 0-06- **IN SERVICE**

--------------------------------------Figure 73: Menu 4-4 (Logbook) The logbook is used to display information about PBX operations. The logbook can contain up to 320 reports on 76 pages, depending on the content.. The logbook indicates hardware and software errors and faults:

hardware data can be interpreted by the user software data is interpreted by the manufacturer

The logbook can also display service records: agenda/alarm family prepayment family monitoring family feature family C.Dist family alarms

The logbook displays the most recent recorded messages first: the title indicates the page number displayed and the total number of pages in the log. The key N (next page) and P (previous page) are used to navigate in the logbook: Position the cursor on the first page and use the "Listing" command to print the whole logbook. Use the "Hardcopy" command to print the current page. Note : When the logbook is saturated (i.e. when the number of messages in the logbook mailbox reaches 40), the logbook switches over to "congestion" mode, which means that the reception of all the messages is no longer guaranteed (some messages may be deleted). The message "Logbook: congestion" is displayed in the logbook. When the logbook returns to normal mode, the message "Logbook: normal lost: xx" appears, specifying the number of messages deleted during the congestion phase.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 101

4.4.1

HARDWARE EVENTS RECORDED IN THE LOGBOOK


1. Total reset, indication that the LAS card has been recognised correctly, indication of a PARKED extension (digital set not connected to PBX). 2. PBX time reset after an auto reset. 3. Analogue set switched to permanent off hook position (PARKED) and end of line lockout (PARK END). 4. Card switched to faulty state following removal with power on, or a card problem. 5. Wake-up appointment reminder report. (Not shown in diagram above). 6. Card set to faulty status if it is removed from cabinet while the system is powered on, or if there is a problem on the card. (Not shown in diagram above). Example of item 3 for an MC 6504 logbook display: 14:11:35 time Extn.: 13/06/91 date 00 network cabinet

00

PARKED

equipment

EVENT 02:58: 02/01/90 ERASE LOG 02:58:19 02/01/90 ERROR: 3E00 T0: 0-02-01 0000 0000 0000

DIAGNOSTIC T0 ALARM T0 (BRI) put in service on a DNT that is not active or not connected

02:58:55 02/01/90 ********T0: OCW * ALARM START ** 03:02:59 02/01/90 T0: OCW ALARM END

T0 ALARM Link cut-off during conversation re-established. Bad electrical connection check contacts

CF ER AIS RAI FA LFA

Clock loss Error date

MS

Sync loss

Alarm indicator signal Remote alarm indicator Remote frame alarm Frame lock loss

Page 102

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.4.2

LOGICAL SECURITY BLOCKS


Automatic system maintenance sees the configuration as a set of hierarchically arranged logical security blocks (LSB). When there is a malfunction this arrangement enables the system to identify the faulty element and take the appropriate action: when an error is detected, automatic maintenance can take fail safe action. This involves changing the status of the security block that covers the defective hardware element. Example: ******LA8 :0, 0, .. ** EN FAUTE ** The fail-safe action report is recorded in the logbook and contains the following information:


4.4.2.1

the type of security block that changed status the security block number new security block state

LIST OF SECURITY BLOCK STATUSES The security block statuses have the following meaning: NOT EQUIP. OUT OF SRV The BLS is not defined in the associated configuration table. The BLS is inaccessible by the software and cannot take part in network operations. This occurs, for example, when the LSB one step up in the hierarchy is faulty. This status is also the initial status of all LSBs before startup. DOWNLOAD IN SERVICE FAULTY DISABLED The processor associated with the BLS is being downloaded. The LSB is working. One of the BLS functions is defective. The LSB is removed from normal operation by automatic maintenance. The maintenance operator has withdrawn the BLS from operational state, using an operator command.

Other special statuses: PARKED The telephone subscriber has not gone on-hook (permanent off-hook condition).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 103

4.5

DELETE LOGBOOK (MENU 4-5)


For the Call Manager (F5): Menu 4-5 (Delete logbook). DELETE LOGBOOK LOGBOOK PASSWORD .....

----------------------------------------------Figure 74: Password for deleting the logbook LOGBOOK PASSWORD Enter the password. When you validate this password, the logbook is deleted and reset to zero. When the operation is complete, the following screen is displayed: DELETE LOGBOOK LOGBOOK DELETED .....

----------------------------------------------Figure 75: Delete logbook

Page 104

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.6

DISPLAY STATUSES (MENU 4-6)


For the Call Manager (F5): Menu 4-6 (Display statuses). Levels 2 (Status of external trunks), 3 (Status f dynamic trunk groups), and 9 (Status of integrated voice boxes) are not available.

DISPLAY STATUSES 1 2 3 4 5 6 7 8 9 STATUS OF EXTENSIONS STATUS OF EXTERNAL TRUNKS STATUS OF DYNAMIC TRUNK GROUPS STATUS OF DATA LINKS MAINTENANCE STATUS ROAMING STATUS OF MOBILES FILLING STATUS OF TABLES STATUS OF CONNECTIONS TCP TUNNEL STATUS OF INTEGRATED VOICE BOXES .

ENTER YOUR CHOICE

---------------------------------------------Figure 76: Display statuses (F6) DISPLAY STATUSES 1 2 3 4 5 6 STATUS OF EXTENSIONS STATUS OF DATA LINKS MAINTENANCE STATUS ROAMING STATUS OF MOBILES FILLING STATUS OF TABLES STATUS OF CONNECTIONS TCP TUNNEL .

ENTER YOUR CHOICE

---------------------------------------------Figure 77: Display statuses (F5)

Note : The status of the integrated voice mailboxes is only available on NeXspan-C/S/L /D PBXs.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 105

4.6.1

STATUS OF EXTENSIONS (MENU 4-6-1)


For the Call Manager (F5): Menu 4-6-1 (Status of extensions). STATUS OF EXTENSIONS 1 STATUS OF EXTENSIONS 2 IP SUBSCRIBERS STATUS ENTER YOUR CHOICE .

-------------------------------------------Figure 78: Status of extensions 4.6.1.1 STATUS OF EXTENSIONS (MENU 4-6-1-1) For the Call Manager (F5): Menu 4-6-1-1 (Status of extensions) SELECTION OF A STATUS TO MONITOR SEARCH STATUS ANY

DIRECTORY BEGINNING WITH

7.......

-----------------------------------------Figure 79: Selection of a status to monitor SEARCH STATUS ANY NO MISSION CAPABLE FREE PERMNT. BUSY UNSTABLE NOT CONNECTED PERM OFFHOOK COND.

RECORD WAITING

Press the space bar until the status you require is displayed. When you validate your selection the user interface displays the list of extensions in the selected status. The following information is given for each extension: DN, equipment number; type, and status. ANY FREE PERMNT. BUSY UNSTABLE PERM OFF-HOOK COND. To display a list of all extensions and their current status. To display a list of all extensions in service and free. To display a list of all extensions currently in the conversation phase. To display a list of all extensions currently setting up a call. To display a list of analogue sets off hook and digital sets not connected.

NO MISSION CAPABLE To display a list of all extensions put in service by an MMC. RECORD WAITING not connected To display a list of all extensions waiting to be registered. To display a list of all the sets or extensions not located

Page 106

11/2006

AMT/PTD/PBX/0053/2/2/EN

DIRECTORY BEGINNING WITH Enter a digit (or number). All sets with directory numbers that start with this digit (or number) will be displayed. Example: On an F6, display of extensions in any status with a directory number beginning with 7.
EXTENSIONS (ANY STATUS) NUM. EQPT. TYPE STATUS ---------------------------------------74042 IP DS FREE 74050 STANDAR FREE 74070 STANDAR FREE 74090 SET B FREE 74095 1-06-14 730 FREE 74096 1-06-15 610 FREE 77020 0-06-02 INT MSG. FREE 77261 1-06-00 760+ 70 FREE 77640 1-06-02 SET N PERM. OFF-HOOK COND. 78669 1-06-01 520N FREE INCOMPLETE DISPLAY 1000/2000

----------------------------------------

Figure 80: Display extensions (F6) (any status) Note : The "Incomplete display" line is an information line indicating that a certain number of subscribers are not displayed (display menu limited to 1000 lines). As of release R4.1, it is possible to display 4000 subscribers on a Call Manager (F5). 4.6.1.2 IP SUBSCRIBERS STATUS (MENU 4-6-1-2) For the Call Manager (F5): Menu 4-6-1-2 (IP subscribers status) APPLICATION STATUS SELECTION Type OF SET APPLICATIV SESSION DIRECTORY BEGINNING WITH: ETHERSET UNCONNECT. ......

---------------------------------------------Figure 81: IP subscribers status - selection This menu is used to display all IP sets declared on the site on the basis of several criteria (type of set, status of set's applicative session, directory number).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 107

TYPE OF SET IP DS TDPC ETHERSET SIP ..

Select the type of IP set you want. Only those IP sets of the type selected declared on the site will be displayed. To display all the IP sets (IP DS, TD PC and ETHERSET) declared on the site, select "..". APPLICATIV SESSION CONNECT. UNCONNECT. OPTIMISED NOT OPTIMISED ..

Select the status of the set's applicative session. Sets whose application session status is the same as the status selected will be displayed. To display all sessions, select "..". CONNECT. UNCONNECT. OPTIMISED List all the connected IP sets (regardless of the connection mode, optimised or not optimised). List all the IP sets that are not connected. List all the IP sets connected with an optimised connection IP address (session set up with one of the two recommended connection IP addresses). List all the IP sets connected with an optimised connection IP addres (session set up with the other recommended connection IP address). List all the connected IP sets, regardless of the session status.

NOT OPTIMISED . DIRECTORY BEGINNING WITH

Enter a digit (or number). All IP sets declared on the site with directory numbers that start with this digit (or number) will be displayed. When you have selected the search criteria, press Enter to confirm. Two examples of IP set display are given below: Example 1: SUBSCRIBERS ........NOT CONNECT. STATUS DN MODEL SESSION CAC COMPLEMENTARY INFORMATIONS --------------------------------------------------23 57 TDPC ETHERSET UNCONNECT. UNCONNECT. 01-0 01-1

--------------------------------------------------Lines of complementary information: Release L2: Site CCU Proc nb (CLX card) Release L3: IP address UDP Port Location nb Begin More Figure 82: IP subscribers status - display non-connected applicative sessions

Page 108

11/2006

AMT/PTD/PBX/0053/2/2/EN

Example 2: SUBSCRIBERS ........CONNECT. STATUS DN MODEL SESSION CAC COMPLEMENTARY INFORMATIONS ------------------------------------------------22 7808 CONNECT. 001-SITE LOC 02 (0-00) 131.129.11.124 : 40000 ETHERSET CONNECT. 003-SITE 3 02 (01) 131.129.13.62 : 40000 01-2

24

........

------------------------------------------------Lines of complementary information: Release L2: Site CCU Proc nb (CLX card) Release L3: IP address UDP Port Location nb Begin More Figure 83: IP subscribers status - display connected applicative sessions DN Shows the directory number of the IP sets matching the search criteria. Note : For a multi-line subscriber, only the main directory number is displayed.

MODEL Shows the type of IP set. For an IP DS set, gives the model of the set connected. SESSION Shows the status of the set's applicative session. CAC Shows the CAC center number (the center containing the main CAC server) and class number of the IP set. When the search criteria concern applicative sessions other than non-connected sessions, the following complementary information is given. SITE Shows the site where the IP signalling point is located. CLUSTER Shows the cluster where the IP signalling point is located.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 109

PROC NB (CLX BOARD) Shows the processor number of the card where the IP signalling point is located. Using the processor number, if the IP signalling point is located on the local site, the MMC will decode the processor number on the card slot (cabinet card) in order to make this processor number easily comprehensible. Otherwise, the processor number cannot be decoded. IP ADDRESS Shows the sets IP address. UDP PORT Shows the set's UDP port number. LOCATION NB Note : This menu is only displayed in a USA configuration. The location number identifies the geographical area of the subnet for an IP terminal connection. It is used to manage the number 911. It may be the same for two geographically close subnets.

4.6.2

STATUS OF EXTERNAL TRUNKS (MENU 4-6-2)


For the Call Manager (F5): this menu is not available.

SELECTION OF A STATUS TO MONITOR SEARCH STATUS ON TRUNK GROUP FIRST PHYSICAL EQUIPMENT ANY ...... 10900

-------------------------------------------------Figure 84: Selection of a status to monitor SEARCH STATUS ANY NO MISSION CAPABLE FREE BUSY PERM OFF-HOOK COND. FREE LOCKING FREE INCOMING FREE CALLBACK

ALARM MONITORI NG

ON SERVICE WAITING

LOCKING

Select a status and then a trunk group. When you validate your selection, the user interface displays the list of extensions in the selected status on the selected trunk group.

Page 110

11/2006

AMT/PTD/PBX/0053/2/2/EN

ANY FREE BUSY PERM OFF-HOOK COND. FREE INCOMING NO MISSION CAPABLE LOCKING ALARM MONITORING FREE LOCKING FREE CALLBACK ON SERVICE WAITING ON TRUNK GROUP Name of the trunk group. FIRST PHYSICAL EQUIPMENT

To display the list of all lines with their current status. To display the list of all lines in service and free. To display the list of all lines in conversation phase (call in progress). To display the list of all lines in permanent off-hook position. To display the list of all incoming leased lines in service and free. To display the list of all lines disabled by an MMC. To display the list of all lines in blocking status with respect to the public network. To display the list of all lines with no T0 access activated. To display the list of all lines in fault status with respect to the PBX. To display the list of all lines in free state, but which will receive automatic call-back. To display the list of trunks waiting to be IN SERVICE.

The external trunk lines on the trunk group are displayed starting with the first position indicated. Example: Display of the external trunk lines on the trunk group. LINES ANY TO ........
EQT ACCESS TR. GP STATUS IT.PH -----------------------------------------------0-02-03 :236 FT0-ETSI FREE 0-02-03 :237 FT0-ETSI FREE 0-03-00 :240 FT0-ETSI FREE 0-03-00 :241 FT0-ETSI FREE 0-03-01 :244 FT0-ETSI FREE 0-03-01 :245 FT0-ETSI OUT OF SERVICE 1-00-00 :000 VOIP.TG OUT OF SERVICE 1-00-01 :001 VOIP.TG OUT OF SERVICE 1-00-02 :002 VOIP.TG OUT OF SERVICE 1-00-03 :003 VOIP.TG OUT OF SERVICE 1-00-04 :064 VOIP.TG OUT OF SERVICE 1-00-05 :065 VOIP.TG OUT OF SERVICE 1-00-06 :066 VOIP.TG OUT OF SERVICE ------------------------------------------------

Figure 85: External trunk lines on the trunk group

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 111

4.6.3

STATUS OF DYNAMIC TRUNK GROUPS (MENU 4-6-3)


For the Call Manager (F5): this menu is not available. The selection screen displays the status and name of the trunk group you wish to view. SELECTION OF A STATUS TO MONITOR

STATUS SEARCHED

ANY

OVER THE DYNAMIC TRUNK GP

DYN S6

----------------------------------------

Figure 86: Selection of a status to monitor On the screen Selection of a status to monitor, select:

required

in the field "State searched", the status of the trunk group in the field "Over the dynamic trunk GP", the name of the trunk group

When you validate your selection, the following display menu shows the physical trunk groups used by the specified dynamic trunk group. LINES <TRUNK GROUP STATUS> OVER <TRUNK GROUP NAME> EQPT ACCES Tk gp STATUS IT.PH -----------------------------------------------1-00-04 064 VOIP.TG BUSY -----------------------------------------------Origin Session Print Begin More

Figure 87: Status of dynamic trunk groups

Page 112

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.6.4

STATUS OF DATA LINKS (MENU 4-6-4)


For the Call Manager (F5): Menu 4-6-2 (Status of data links). Example: Display of data links. STATUS OF DATA LINKS EQT NO. TYPE DN. STATUS NO.LC ---------------------------------------AFISER SERVER 010 FREE SERVTL SERVER 011 FREE KITAXE SERVER 012 FREE SAESAE SERVER 013 FREE MUFACT SERVER 014 FREE SERV SERVER 015 FREE SERGIC SERVER 016 IN.CALL 1 SRVRHM SERVER 017 FREE DEBUG SERVER 018 FREE TELBOR SERVER 019 FREE ERF SERVER 020 FREE BUFTIC SERVER 021 FREE ANISDN SERVER 022 FREE ----------------------------------------

Figure 88: Status of data links (F6) STATUS OF DATA LINKS SVMEVO 1-00-01 1-01-00 1-01-01 1-01-02 0-04-00 0-04-01 0-05-00 SERVER 023 LLP T2 1001 IP GWY IP TUN 1101 IP TUN 1102 IP GWY 030 IP TUN 0401 CP1 031 FREE OUT OF SE FREE FREE FREE FREE IN.COM DISCONNECT

---------------------------------------Figure 89: Status of data links (F6) (continued) NO MISSION CAPABLE To display a list of links out of service and in disabled status. DISCONNECTED RECOVERY FREE BUSY IN COMM To display the list of links in service but cut off (terminal switched off, level 2 not established, etc.). To display the list of links in course of level 3 restart procedure. To display the list of links in service and waiting for calls. To display the list of links with a call set up: the number of communications is shown by the NO.LC parameter. To display the list of links with a call set up.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 113

4.6.5

MAINTENANCE STATUS (MENU 4-6-5)


For the Call Manager (F5): Menu 4-6-3 (Maintenance status). A selection menu is used to define the state to be displayed. The names used to identify the devices are those used in the logbook. SELECTION OF A STATUS TO MONITOR SEARCH STATUS POSITION OF FIRST CARD ANY .

----------------------------------------------------Figure 90: Selection of a status to monitor SEARCH STATUS ANY DOWNLOAD FAULTY IN SERVICE LOCKED NET. ALARM DISABLED UNUSED NO MISSION CAPABLE

The software maintenance program manages the status of each PBX: a card is a device, an equipment interface is a device of a lower order. A device can be in the following statuses: ANY FAULTY LOCKED DISABLED NO CAPABLE ENABLED NET. ALARM UNUSED The status of all existing devices Cannot be used following a hardware problem encountered on a device. Device temporarily unavailable (for example: defective release). Cannot be used following a request made by the operator. Cannot be used because a device of a higher hierarchical level MISSION cannot be used (DISABLED or FAULTY). This device of a higher hierarchical level must be rectified in order to set the device which is out of service back in service. Available for application software. LSB status for NETWORK cards (in particular PTx/PVI) which indicates network disconnection (IP, ISDN, etc.). A board is considered unused for the Exploitation if this board is in the state under operator for Maintenance, if all its equipment are unused and if this board does not have an IP address.

Note : if BVI subscriber is in the state under operator and does not have a directory number, it will be considered unused. IVR Equipment of MEVO board will be

Page 114

11/2006

AMT/PTD/PBX/0053/2/2/EN

considered unused if it is in the state under operator and if there is no IVR catalogue present in the memory of MEVO board.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 115

POSITION OF FIRST CARD Enter the number of the first card in the display table. When you validate the status of the first number, the following screen is displayed. Example: Display of the cards in maintenance status. DISPLAY ANY MAINTENANCE STATUS POSITION BOARD EQUIPT. STATUS ---------------------------------------------0-00**Lnx*** IN SERVICE 0-00-01 **Lnx*** ***AbNum IN SERVICE 0-00-02 **Lnx*** ***AbNum IN SERVICE 0-00-03 **Lnx*** ***AbNum IN SERVICE 0-00-04 **Lnx*** ***AbNum IN SERVICE 0-00-05 **Lnx*** ***AbNum IN SERVICE 0-00-06 **Lnx*** ***AbNum IN SERVICE 0-00-07 **Lnx*** ***AbNum IN SERVICE 0-010-01-00 0-01-01 0-01-02 **Lax*** **Lax*** **Lax*** **Lax*** ***Abon ***Abon ***Abon IN IN IN IN SERVICE SERVICE SERVICE SERVICE

----------------------------------------------

Figure 91: Display any maintenance status

DISPLAY ANY MAINTENANCE STATUS POSITION BOARD EQUIPT. STATUS ---------------------------------------------0-01-03 **Lax*** ***Abon IN SERVICE 0-01-04 **Lax*** ***Abon IN SERVICE 0-01-05 **Lax*** ***Abon IN SERVICE 0-01-06 **Lax*** ***Abon IN SERVICE 0-01-07 **Lax*** ***Abon IN SERVICE 0-020-02-00 0-02-01 0-02-02 0-02-03 0-030-03-00 0-03-01 **LD4*** **LD4*** **LD4*** **LD4*** **LD4*** **LD4*** **LD4*** **LD4*** IN SERVICE NOT USED NOT USED NOT USED IN SERVICE IN SERVICE IN SERVICE IN SERVICE

***S0 ***S0 ***S0 ***T0 ***T0 ***T0

----------------------------------------------

Figure 92: Display any maintenance status (continued)

Page 116

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.6.6

ROAMING STATUS OF MOBILES (MENU 4-6-6)


For the Call Manager (F5): Menu 4-6-4 (Roaming status of mobiles). MOBILE LOCALIZATION STATUS 1 MOBILE BASIS 2 CELL BASIS ENTER YOUR CHOICE .

---------------------------------------Figure 93: Mobile localisation status 4.6.6.1 MOBILE BASIS (MENU 4-6-6-1) This menu is used to display the status and localisation of all the mobiles. MOBILE LOCALIZATION DN CEL.REF. CELL STATUS CT LEV ----------------------------------------------------------------------------------------------------Figure 94: Mobile localisation (menu 4-6-6-1) The following information is displayed:

The mobile's directory number the REF.CELL is not used the number of extensions in the group the last cell in which the mobile was located: if the cell is internal, the field gives the cell ID; if the cell is remote, the field gives the number of the remote site followed by the cell ID Mobile status: located (INTERNAL) or lost (REMOTE) the counter indicating the failed calls made to the mobile (the number of calls made when the mobile is called while it is outside coverage area or turned off) LEV is not used

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 117

4.6.6.2

CELL BASIS (MENU 4-6-6-2) This menu is used to display, for a given cell, all the mobiles attached to this cell. MOBILE LOCALIZED ON CELL SELECT THE CELL ........

---------------------------------------Figure 95: Mobile localisation (cell basis) (menu 4-6-6-2) Select the cell. Press Enter to confirm. MOBILES LOCALIZED ON CELL xxxxxx EQUIP NUM. DIR NUM. SITE STATUS ------------------------------------------------------------------------------------------Figure 96: Mobiles localised on cell xxxxxx The following information is displayed:

base station slot, base station number directory number of mobile attached to base station, the site name mobile status: located, busy, etc.

Page 118

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.6.7

FILLING STATUS OF TABLES (MENU 4-6-7)


For the Call Manager (F5): Menu 4-6-5 (Filling status of tables). FILLING STATUS OF TABLES PROGRAMMING KEYS PERSONAL ABBREV. NUMBER PREDEFINED FORWARD IMMEDIATE FORWARD FORWARD ON BUSY FORWARD ON NO ANSWER RECORDED CALL IMMEDIATE CALL DELAYED CALL MANAGER LINE WAKE-UP DID DIRECTORY NUMBER MULTILINE DIRECTORY NUMBER DIGITAL SETS MOBILES 219 / 4600 0 / 255 0 / 100 1 / 600 0 / 600 2 / 600 0 / 128 0 / 128 0 / 128 2 / 128 0 / 500 0 / 400 4 / 256 18 / 1024 0 / 256

---------------------------------------Figure 97: Filling status of tables

FILLING STATUS OF TABLES NUMBERING PLAN : TREE NUMBERING PLAN : DATA NETWORK PLAN : TREE NETWORK PLAN : DATA OUTGOING TRANSLATOR : OUTGOING TRANSLATOR : INCOMING TRANSLATOR : INCOMING TRANSLATOR : 34 / 356 100 / 384 2 / 228 2 / 320 1 / 128 3 / 64 1 / 128 1 / 96

TREE DATA TREE DATA

---------------------------------------Figure 98: Filling status of tables (cont.) This menu is used to display the filling status of the feature tables and the quantity used for each table. Note : It is important to check availability before offering or selling certain features.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 119

4.6.8

STATUS OF TCP TUNNEL CONNECTIONS (MENU 4-6-8)


For the Call Manager (F5): Menu 4-6-6 (Status of TCP tunnel connections) STATUS OF CONNECTIONS TCP TUNNEL NAME DN STATUS LC NO. ---------------------------------------S04>S20 1101 CONNECT. IN PROGRS S04>S06 1102 CONNECT. IN PROGRS S04>S21 0401 CONNECTED 1 ---------------------------------------Figure 99: Status of TCP tunnel connections This menu is used to display the status of TCP connections. It displays in table format the name of the connections, their directory number, their status, and the number of logical channels they have in busy status (if the connection is valid). STATUS The Status column displays the following connection statuses: CONNECT. IN PROGRS Waiting for connection and system requesting connection. CONNECT DISCONNECT Valid connection. Connection failed and disconnected.

4.6.9

STATUS OF INTEGRATED VOICE BOXES (MENU 4-6-9)


For the Call Manager (F5): this menu is not available. STATUS OF INTEGRATED VOICE BOXES 1.BVF OVERALL DISPLAY 2 MESSAGES IN A BOX DISPLAY 3 DISPLAY MESSAGES INVOLVED IN AUDIT 4 DISPLAY OF THE GENERAL CHARACTERISTICS 5 DISPLAY BUSY STATISTICS ENTER YOUR CHOICE . -------------------------------------------Figure 100: Status of integrated voice boxes Note : This menu is only accessible if integrated messaging is configured on the PBX.. This menu is used to display the status of integrated voice mailboxes: display of all the voice mailboxes, listing of the messages in a mailbox, display of hardware characteristics and message occupation statistics in the flash memory.

Page 120

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.6.9.1

OVERALL VIEW OF VOICE BOXES (MENU 4-6-9-1) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed: VOICE MAIL BOXES DISPLAY FROM NUMBER FOR THE SERVICE CLASS FOR THE FUNCTIONAL MODE FOR THE STATUS ....... ....... ....... .......

-------------------------------------------Figure 101: Overall view of voice mailboxes This menu is used to display all or part of the integrated voice mailboxes: FROM NUMBER A list of the voice mailboxes can be displayed in ascending order, from the directory number of any voice mailbox. Enter a directory number. When you validate this number, the following screen is displayed: GLOBAL VOICE MAIL DISPLAY BVF FUNCTION STATUS: IN SERVICE VOICE MAIL NUMBER: 16 RANGE/VOICE MAIL TOTAL NUMBER : 100% RANGE OF USED FLASH : 38% NUM STATUS MSG GREET. NGM NRM DURAT. ---------------------------------------200 AVAIL RS STANDARD 0 2 00:36 201 AVAIL RS STANDARD 0 2 00:36 202 DISPO RS BVF PERSONAL MESSAGE 3 0 203 AVAIL RS STANDARD 1 1 00:36 204 AVAIL RS STANDARD 0 1 00:18:00 205 AVAIL RS STANDARD 3 4 03:02:00 206 AVAIL RS STANDARD 1 0 00:18:00 207 AVAIL RS STANDARD 0 4 02:07:00

00:54

---------------------------------------Figure 102: Displaying voice mailboxes from a directory number

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 121

FOR THE SERVICE CLASS A list of the voice mailboxes belonging to the same service class can be displayed. Select the name of the class (select "----" to display all the voice mailboxes). When you validate the selection, the following screen is displayed (read only): VOICE MAIL DISPLAY FOR THE CLASS : BVI 0 BVF FUNCTION STATUS: IN SERVICE VOICE MAIL NUMBER: 2 RANGE/VOICE MAIL TOTAL NUMBER : 12% RANGE OF USED FLASH : 0% NUM STATUS MSG GREET. NGM NRM DURAT. ---------------------------------------200 AVAIL RS STANDARD 0 2 00:36 201 AVAIL RS STANDARD 0 2 00:36 ---------------------------------------TOTALS: 0 4 00:01:12 ---------------------------------------Figure 103: Displaying voice mailboxes belonging to the same service class FOR THE FUNCTIONAL MODE A list of the voice mailboxes can be displayed depending on their operating mode: ------RE RS View all voice mailboxes View voice mailboxes in Announcement and Recording mode View voice mailboxes in Announcement mode

Select a voice mailbox operating mode. When you validate the selection, the following screen is displayed (read only): GLOBAL VOICE MAIL DISPLAY BVF FUNCTION STATUS: IN SERVICE VOICE MAIL NUMBER: 15 RANGE/VOICE MAIL TOTAL NUMBER : 93% RANGE OF USED FLASH : 37% NUM STATUS MSG GREET. NGM NRM DURAT. ---------------------------------------200 AVAIL RS STANDARD 0 2 00:36 201 AVAIL RS STANDARD 0 2 00:36 202 DISPO RS BVF PERSONAL MESSAGE 3 0 203 AVAIL RS STANDARD 1 1 00:36 204 AVAIL RS STANDARD 0 1 00:18:00 205 AVAIL RS STANDARD 3 4 03:02:00 206 AVAIL RS STANDARD 1 0 00:18:00 207 AVAIL RS STANDARD 0 4 02:07:00 ----------------------------------------

00:54

Figure 104: Displaying voice mailboxes depending on operating mode Note : When the cursor is positioned on a voice mailbox number, a zoom command (ESC Z) can be used to display the details of the messages in the voice mailbox (see menu 4.6.9.2).

Page 122

11/2006

AMT/PTD/PBX/0053/2/2/EN

FOR THE STATUS A list of the voice mailboxes can be displayed depending on their status: ------D_SAT M_SAT View voice mailboxes with space available to receive new messages View voice mailboxes with no more recording space available View voice mailboxes with maximum number of authorised messages

Select a status. When you validate the selection, the following screen is displayed (read only): GLOBAL VOICE MAIL DISPLAY BVF FUNCTION STATUS: IN SERVICE VOICE MAIL NUMBER: 1 RANGE/VOICE MAIL TOTAL NUMBER : 6% RANGE OF USED FLASH : 4% NUM STATUS MSG GREET. NGM NRM DURAT. ---------------------------------------209 D SAT RS STANDARD 2 18 20:19 ---------------------------------------TOTALS: 2 18 00:20:19 ---------------------------------------Figure 105: Displaying voice mailboxes by status BVF FUNCTION STATUS: Indicates the status of the announcement and recording function. The announcement and recording function is locked. Until the unlocking code is entered (menu 3-8-1 Unlock SA functions), the voicemail operates in announcement mode for all the voice mailboxes declared. The answering and recording function is unlocked (menu 3-8-1 Unlock SA functions). All the mailboxes are in announcement and recording mode. The user can then choose the configuration for his voice mailbox and reactivate basic answering machine mode.

LOCKED

IN SERVICE

VOICE MAIL NUMBER: Indicates the total number of voice mailboxes meeting the selection criteria. RANGE/VOICE MAIL TOTAL NUMBER : Indicates the percentage of voice mailboxes meeting the selection criteria out of the total number of voice mailboxes declared.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 123

RANGE OF USED FLASH : Indicates the occupation rate of the flash memory for all messages listed on the basis of the criteria selected. NUMBER: Voice mailbox directory number (same as the directory number of the user with this mailbox). STAT: Status of the voice mailbox: AVAIL D SAT M SAT DISA. MOD: Voice mailbox operating mode: RE RS GREET.: Type of voice mailbox greeting message: STANDARD NAME PERSO. RE PERSO. RS NGM: Total number of greeting messages for each voice mailbox listed. NRM: Total number of messages left in each voice mailbox listed. DURAT.: Total duration of all messages recorded in the voice mailbox (messages left + greeting messages). TOTALS: - Total number of recorded messages (NGM and NRM) in all the voice mailboxes. - Total duration of all messages in all voice mailboxes. Standard message (voice mailbox number) Simple customised message (name of mailbox owner) Detailed customised message (greeting message in announcement and recording mode) Detailed customised message (greeting message in announcement mode) Announcement and Recording mode Announcement mode Voice mailbox not full (place available) Voice mailbox saturated in terms of duration Voice mailbox saturated in terms of messages. Voice mailbox inaccessible (for example, card absent)

Page 124

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.6.9.2

VIEW MESSAGES IN A BOX (MENU 4-6-9-2) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed:

SELECT A VOICE BOX VOICE MAIL NUMBER 203...

---------------------------------------Figure 106: Selecting a voice mailbox This menu is used to display all the messages contained in a selected voice mailbox. VOICE MAIL NUMBER Displays the messages in a voice mailbox by entering its number. DISPLAY DISPLAY : 203 CLASS : BVI 1

NUM DATE ACC.TYPE STATUS DURATION ----------------------------------------------------0 BVF PERSONAL MESSAGE 00:10 1 NAME 00:05 2 SVF PERSONAL MESSAGE 00:07 ----------------------------------------------------0 13/05/03 13:36 LEFT 00:18 ----------------------------------------------------TOTAL: 00:00:40 -----------------------------------------------------Figure 107: Displaying voice mailbox messages The recorded messages are of two types:

first part of menu: greeting messages (maximum of 3 types per voice mailbox) second part of menu: messages left

NUM Message number. DATE Date on which the message was left (dd/mm/yy hh:mm). ACCESS Type of greeting active: STANDARD NAME PERSO. RE PERSO. RS Greeting by voice mailbox number Greeting by name Announcement and recording mode customised greeting Announcement mode customised greeting

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 125

STATUS Message status (for messages left only): LEFT READ DURATION Duration of the message recorded in minutes/seconds. TOTAL Total duration of all the messages (greetings and messages left) in the voice mailbox. 4.6.9.3 VIEW MESSAGES INVOLVED IN AUDIT (MENU 4-6-9-3) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed: DISPLAY MESSAGES INVOLVED IN AUDIT BOX MSG DATE STATUS DURATION ----------------------------------------------200 0 13/05/03 13 :36 LEFT 00:10 200 1 13/05/03 13 :35 READ 00:08 201 0 29/04/03 13 :35 LEFT 00:04 201 1 29/04/03 13 :34 READ 00:03 ----------------------------------------------TOTALS: 00:00:25 BUSY RANGE : 0% A message has been left but not read The message left has been read

----------------------------------------------Figure 108: View messages involved in audit This menu is used to display all the messages which will be deleted when the audit is activated. BOX The voice mailbox number. MSG Number of messages in the voice mailbox. DATE Date on which the message was left (dd/mm/yy hh:mm). STATUS Message status:

left: a message has been left but not read read: the message left has been read.

Page 126

11/2006

AMT/PTD/PBX/0053/2/2/EN

DURATION Duration of the message recorded in minutes/seconds. TOTALS Total duration of messages selected on the basis of certain criteria. BUSY RANGE Rate of occupation of flash memory by messages selected on the basis of certain criteria. 4.6.9.4 DISPLAY GENERAL CHARACTERISTICS (MENU 4-6-9-4) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed: DISPLAY GENERAL CHARACTERISTICS BVF BOARD SLOT: 0-06 --------------------------------------- FLASH FILLING RATE 10% - FLASH STEPS (IN SECOND) 18 - FLASH SIZE (MEGABYTES) 32 - FIRMWARE VERSION - CATALOGUE LIST OF VOICE ANNOUNCEMENTS: CATALOGUE 0 BXF003CD.CAT CATALOGUE 1 XXXX CATALOGUE N XXXX

Figure 109: Display general characteristics This menu is used to display the card characteristics. BVF BOARD SLOT: 0-06 Position of virtual voicemail card integrated in the CPU card (F6). FLASH FILLING RATE Filling rate (as a percentage) of the message area card signature. FLASH STEPS (IN SECOND) Messages recorded in the flash memory are stored in sections. The "step" represents the duration of recording per section (expressed in seconds). FLASH SIZR (MEGABYTES) Size of the flash memory in megabytes. FIRMWARE VERSION Version number in 8 alphanumeric character. CATALOGUE LIST OF VOICE ANNOUNCEMENTS Name of specified catalogues (from 0 to n) in 12 alphanumeric characters.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 127

4.6.9.5

DISPLAY BUSY STATISTICS (MENU 4-6-9-5) For the Call Manager (F5): not available When you select this feature, the following screen is displayed: BUSY STATISTICS DISPLAY ALL KIND OF MESSAGES TOTAL BOX NUM. MSG NUM.DURATION RATE(%) ------------------------------------16 140 02:38:53 38 ANNOUNCEMENT GREETING DURATIONS GREETING TYPE MSG. NUM DURATION RATE(%) ------------------------------------NAME 8 00:03:36 0 BVF PERS 6 00:02:06 0 sVF PERS 6 00:08:42 2 ---------------------------------------Figure 110: Displaying voicemail busy statistics BUSY STATISTICS DISPLAY RECORDED MESSAGES DURATIONS MSG STAT MSG NUM; DURATION RATE(%) ------------------------------------LEFT 97 01:17:06 18 READ 23 01:06:54 16 ---------------------------------------Figure 111: Displaying voicemail busy statistics (cont.) This menu gives an overall view of the occupation state of the flash memory:

recorded messages)

Display of all recorded messages (greeting messages + Display of greeting messages according to type (name, customised) Display of recorded messages according to status (read, not read)

Page 128

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.7

TRAFFIC OBSERVATION (MENU 4-7)


For the Call Manager (F5): Menu 4-7 (Traffic observation). Levels 1 (Define trunk group observation), 2 (Display trunk group observation), 3 (Base station observation), 4 (base station trunk observation), 7 (Integrated voice box parameters) are not available. TRAFFIC OBSERVATION 1 DEFINE TRUNK GROUP OBSERVATION 2 DISPLAY TRUNK GROUP OBSERVATION 3 BASE STATION OBSERVATION 4 BASE STATION TRUNK OBSERVATION 5 MOBILE OBSERVATION 6 RESET WIRELESS OBSERVATION 7 INTEGRATED VOICE BOX PARAMETERS 8 CAC SERVER MONITORING ENTER YOUR CHOICE . -------------------------------------------Figure 112: Traffic observation (F6) TRAFFIC OBSERVATION

1 MOBILE OBSERVATION 2 RESET WIRELESS OBSERVATION 3 CAC SERVER MONITORING ENTER YOUR CHOICE . -------------------------------------------Figure 113: Traffic observation (F5) Traffic observation is currently limited to trunk groups and mobiles. Traffic observation of mobiles is limited to output of counters on request and manual reset of the counters.

given moment.

A maximum of 8 trunk groups can be observed at a particular Periodic observation can be achieved by taking 10-, 20-, 30or 60-minute samples. A maximum of 256 samples can be stored. When a total of 256 samples is reached, the oldest samples are deleted by the new samples. Only significant samples are stored, and the minimum busy rate is set by the operator. Observation duration is defined in hours, beginning at the start date (infinite if no duration is declared).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 129

4.7.1

DEFINE TRUNK GROUP OBSERVATION (MENU 4-7-1)


For the Call Manager (F5): this menu is not available. DEFINE TRUNK GROUP OBSERVATION SAMPLING TIME observation period IN HOURS START DATE MINIMUM RATE OF RECORDING LIST OF TRUNK GROUPS MONITORED: 1 2 3 4 5 6 7 8 10 min 0. 00:00 01/01 0. ........ ........ ........ ........ ........ ........ ........ ........

----------------------------------------------Figure 114: Define trunk group observation This menu is used to identify the trunk group(s) to be observed, to select the sampling time, to set observation duration (optional), and to reset the sampling memory. SAMPLING TIME 10 MIN 20 MIN 30 MIN 60 MIN 1MIN (test)

Select the required sampling time. OBSERVATION PERIOD IN HOURS Enter the observation period (hh). The observation period is infinite if this field is not filled in. START DATE Observation start date (read only). MINIMUM RATE OF RECORDING Busy status percentage (in 2 digits) above which samples are stored. This is to avoid a significant sample being deleted by a non-significant sample. LIST OF TRUNK GROUP MONITORED Lists from 1 to 8 BRI.TG ANA.TG

Select the trunk group to be observed.

Page 130

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.7.2

DISPLAY TRUNK GROUP OBSERVATION (MENU 4-7-2)


For the Call Manager (F5): this menu is not available. DISPLAY TRUNK GROUP OBSERVATION TRUNK GROUP SELECTION MINIMUM BUSY RATE RATE IN ERLANGS ........ .. NO

----------------------------------------------Figure 115: Display trunk group observation This menu is used to select the trunk group to be observed and to display the characteristics of the trunk lines in service. TRUNK GROUP SELECTION Select a trunk group. MINIMUM BUSY RATE The minimum busy rate required to display samples of a given trunk group. This rate is only active if the trunk group selection is set at . Note : The minimum busy rate selected is only relevant if the value selected is at least equal to the busy rate value requested for storage. (See Minimum rate of recording).

RATE IN ERLANGS NO YES

Select the rate in Erlangs. Example: Display of trunk group observations. TRUNK GROUP OBSERVATION 13:17 14/12
QR

DIRECTION T0 NC SA BU RE SP ----------------------------------------------------------FT0-ETSI /02 D 8 1 0 0 1 0 0 A. 0 0 0 0 0 ----------------------------------------------------------VOIP.TG /06 D 0 0 0 0 0 0 A. 0 0 0 0 0 ---------------------------------------------------------------------------------------------------------------------

Figure 116: Observation of trunk group table This screen displays the hour, minutes, and date of the observation and a table showing the characteristics of the trunk group observed, including the number of lines in service.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 131

DIRECTION : D: Outgoing or A: incoming to : Busy rate for lines in the trunk group NC : Number of calls in the trunk group SA : Saturation (significant in outgoing mode only). BU : Busy (number of incoming calls for <busy subscribers>) RE : Free (number of incoming calls for <free subscribers>) SP : Conversation (number of voice communications) QR : Quality rate is equal to SP X 100): NC The first line (5) is not always significant for calculation of the busy rate. Example: Calculation is as follows for an outgoing and incoming call on the same trunk group: busy rate for all lines in the trunk group in service multiplied by 100, divided by the reference time, and multiplied by the number of lines in service. In the above table, busy time is from 08:36 to 08:37, that is, 1 minute, and the reference time is 1 MIN (test). The number of lines is 2, so we have 60 sec. x 100: 60 sec. x 2 = 50% busy rate for the trunk group lines. The trunk group can be observed by entering the minimum rate. Use the commands "Next" and "Previous" to move from overall trunk group observation, from busy rate to another rate.

4.7.3

BASE STATION OBSERVATION (MENU 4-7-3)


For the Call Manager (F5): this menu is not available. BASE STATION OBSERVATION
TRUNK GROUP SELECTION FBORNE0

-----------------------------------------------

Figure 117: Base station observation TRUNK GROUP SELECTION BASE TG0

Select the trunk group to be observed. OBS. BASE STATIONS .... since
EQT NO. trunk group PRESENTED CONNECTED CUT more abs radio abs Bchan hand over ----------------------------------------------------1-02-00 FBORNE0 0 0 0 0 0 1-02-01 FBORNE0 0 0 0 0 0 -----------------------------------------------------

Figure 118: Base station observation table This screen displays all the calls presented, made, or cut off on the base stations in a selected trunk group since the last reset. The base stations are identified by the cabinet/card/equipment numbers.

Page 132

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.7.4

BASE STATION TRUNK OBSERVATION (MENU 4-7-4)


For the Call Manager (F5): this menu is not available. BASE STATION TRUNK OBSERVATION
TRUNK GROUP SELECTION ........

-----------------------------------------------

Figure 119: Selection of trunk group to be observed TRUNK GROUP SELECTION BASE TG0

Select the trunk group to be observed. TRUNK. MONIT. FBORNE0 SINCE 00 :00 00/00
CALLS PRESENTED CALLS ESTABLISHED FAIL: NO B CHANNEL ROAMING REQUESTS ROAMING REQUEST CONGESTION TONE HANDOVER REQUESTS HANDOVER REQUESTS IN FAIL STATUS 0... 0... 0.... 4... 0.... 0.... 0....

----------------------------------------------------Figure 120: Observation of the selected trunk group CALLS PRESENTED Number of calls presented since the last reset. CALLS ESTABLISHED Number of calls established since the last reset. FAIL: NO B CHANNEL Number of failed calls since the last reset. ROAMING requests Number of roaming requests made since the last reset. ROAMING REQUESTS CONGESTION TONE Number of roaming request congestions since the last request. HANDOVER REQUESTS Number of handover requests made since the last reset. HANDOVER REQUESTS IN FAIL STATUS Number of handover requests made in fail status since the last reset. Note : To reset, see RESET WIRELESS OBSERVATION.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 133

4.7.5

MOBILE OBSERVATION (MENU 4-7-5)


For the Call Manager (F5): Menu 4-7-1 (Mobile observation). MOBILE OBSERVATION SINCE 00:00 00/00 CIRCUIT DIRECTORY NUMBER INCOMING Presented HANDO SUP -----------------------------------------------------------7500 0 0 0 7501 0 0 0 1502 0 0 0

Figure 121: Mobile observation table For each terminal, this screen displays the directory number and the number of incoming calls with or without roaming.

4.7.6

RESET WIRELESS OBSERVATION (MENU 4-7-6)


For the Call Manager (F5): Menu 4-7-2 (Reset wireless observation). RESET WIRELESS OBSERVATION MOBILES COUNTERS RADIO station COUNTERS CONFIRMATION NO NO NO

----------------------------------------------Figure 122: Rest wireless observation This screen is used to define all counters to be reset. The date and time of the operation is given for each correspondent. MOBILES COUNTERS NO YES

If you select YES, the mobile counters are reset. RADIO STATION COUNTERS NO YES

If you select YES, the counters connected to one ore more base station trunk groups are reset. CONFIRMATION NO YES

Select YES to confirm the deletion of the specified counters and to record the date and time of the operation.

Page 134

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.7.7

INTEGRATED VOICE BOX PARAMETERS (MENU 4-7-7)


For the Call Manager (F5): this menu is not available. IVB INTEGRATED VOICE BOX PARAMETERS 1 AUDIT START-UP CRITERIA 2 MESSAGE SELECTION CRITERION 3 RESET FLASH ENTER YOUR CHOICE .

-------------------------------------------Figure 123: Integrated voice box parameters This menu is used to select the parameters for starting the audit and deleting messages, audit start up, message deletion, and to reset the flash memory. Note : This menu is only accessible if integrated messaging is configured on the PBX..

4.7.7.1

AUDIT START-UP CRITERIA (MENU 4-7-7-1) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed: AUDIT START-UP CRITERIA FREQUENCY: HOURLY FREQUENCY: DAILY TIME OF START-UP STAT: ACTIVE ACTION: 0 1 0 ......

Figure 124: Audit start-up criteria This menu is used to define the audit start-up criteria. Auditing is set to be carried out periodically (hourly or daily) beginning at a start date. If the frequency fields are set at 0, auditing will not be carried out. FREQUENCY: HOURLY Hourly (hh: from 0 to 23). FREQUENCY: DAILY Daily (dd: from 1 to 31). TIME OF START-UP Time the audit will start (hh: from 0 to 23).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 135

STATUS This field displays the current state of the audit, ACTIVE or INACTIVE. ACTION MODIFY CREATE REMOVE

This field is used to create or delete an audit. It is also used to change the parameters for running the active audit with new parameters. 4.7.7.2 MESSAGE SELECTION CRITERIA (MENU 4-7-7-2) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed: MESSAGE SELECTION CRITERIA
OR CRITERIA VALUES - CONDITION: 0 -------------------------- FOR MESSAGE STATUS - AND THE LENTH OF SERVICE (DAYS) - AND THE DURATION (SECONDS) - AND THE SERVICE CLASS OR CRITERIA VALUES - CONDITION: 1 -------------------------- FOR MESSAGE STATUS - AND THE LENTH OF SERVICE (DAYS) - AND THE DURATION (SECONDS) - AND THE SERVICE CLASS OR CRITERIA VALUES - CONDITION: 2 -------------------------- FOR MESSAGE STATUS - AND THE LENTH OF SERVICE (DAYS) - AND THE DURATION (SECONDS) - AND THE SERVICE CLASS OR CRITERIA VALUES - CONDITION: 3 -------------------------- FOR MESSAGE STATUS - AND THE LENTH OF SERVICE (DAYS) - AND THE DURATION (SECONDS) - AND THE SERVICE CLASS

.... 0 0 ....

.... 0 0 ....

.... 0 0 ....

.... 0 0 ....

Figure 125: Message deletion criteria This menu is used to define four conditions for a message to be selected or destroyed when the sudit starts. For each condition you can specify 4 criteria: the message status (read or left), the length of time it has been in the voice mailbox (in days), its duration (in seconds) and its service class. FOR MESSAGE STATUS READ LEFT READ LEFT

Whatever the message status Message left and read Message left but not read

Page 136

11/2006

AMT/PTD/PBX/0053/2/2/EN

AND THE LENTH OF SERVICE (DAYS) In days. The selected (or deleted) message has reached or exceeded the maximum length of time a message is allowed to remain in the voice mailbox. AND THE DURATION (IN SECONDS) In seconds. The duration of the selected (or deleted) message has exceeded the specified limit. AND THE SERVICE CLASS Select the name of the class or "------" (whatever the class). Note : If no criteria are selected in a particular block, the audit will not be run on this block.

4.7.7.3

RESET FLASH (MENU 4-7-7-3) For the Call Manager (F5): this menu is not available. When you select this feature, the following screen is displayed: RESET VOICE BOX FLASH PASSWORD xxxxx

Figure 126: Reset voice mailbox flash This menu is used to delete all the recorded messages in the card flash memory (both greeting messages and messages left). IMPORTANT : Reset the PBX after the voice mail system has been reset so that the messages are deleted from the flash memory. PASSWORD xxxxx Enter your password in this field.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 137

4.7.8

CAC SERVER MONITORING (MENU 4-7-8)


For the Call Manager (F5): Menu 4-7-3 (CAC server monitoring) CAC SERVER MONITORING 1 DISPLAY OVERFLOW TO OTHER CENTRES 2 DISPLAY FLOW PER CLASS 3 CENTERS COUNTERS REINITIALIZATION 4 CLASS COUNTERS REINITIALIZATION 5 CAC SERVERS STATUS ENTER YOUR CHOICE .

-------------------------------------------Figure 127: CAC server monitoring This menu is used to access the menus for displaying and resetting current flow tables for the active server. Note : The active server is the server used to control inter-centre and/or intra-class flows. The server name may therefore be either the main server or secondary server

4.7.8.1

DISPLAYING FLOWS TOWARDS OTHER CENTRES (MENU 4-7-8-1) For the Call Manager (F5): Menu 4-7-3-1 (Disp. flow towards other centres) IMPORTANT : This menu only appears if the PBX is configured in multi-site mode (menu 3.6 - Parameters management). DISPLAY OVERFLOW TO OTHER CENTRES ACTIVE SERVER: 001-SITE LOC, CCU: 2 CENTER THGPT MAX NO CRIT NB REF ----------------------------------------------------------02-center 2 03-center 3 04-center 4 7 0 7* 9 0 9* 0 0 0 0 0 0

----------------------------------------------------------Figure 128: Display flows towards other centres This menu is used to display the current server counters on a centre-by-centre basis. Only the counters of the centres to which the flow is limited are displayed. These counters are read in the active server

Page 138

11/2006

AMT/PTD/PBX/0053/2/2/EN

ACTIVE SERVER: XXXXX, CCU: ZZ This line shows the name of the site where the active server is located (counters read in this server) and the cluster number (cluster no. 2 for "single-cluster" systems). CENTRE Shows the name of the centre. THROUGPT Shows the current flow (in kbit/s). Note : If a centre is attached to a transit centre, its current flow is in fact that of the transit centre. If this is the case, the symbol * is displayed. MAX Shows the maximum current flow reached. Note : If a centre is attached to a transit centre, its maximum current flow is in fact that of the transit centre. If this is the case, the symbol * is displayed. NO CRIT Shows the number of calls in a critical area. NB REF Shows the numer of calls refused. 4.7.8.2 DISPLAY FLOWS BY CAC CLASS (MENU 4-7-8-2) For the Call Manager (F5): Menu 4-7-3-2 (Disp. flow per class) DISPLAY FLOW PER CLASS ACTIVE SERVER: 001-SITE LOC, CCU: 2 CLASS THGPT MAX NO CRIT NB REF ----------------------------------------------------------0 1 2 0 7 0 7 9 0 0 0 0 0 0 0

----------------------------------------------------------Figure 129: Display flows by CAC class Only CAC class counters with limited flow are displayed. These counters are read in the active server ACTIVE SERVER: XXXXX, CCU: ZZ This line shows the name of the site where the active server is located (counters read in this server) and the cluster number (cluster no. 2 for "single-cluster" systems).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 139

CLASS shows the number of the class. THROUGPT Shows the current flow (in kbit/s). MAX Shows the maximum current flow reached. NO CRIT Shows the number of calls in a critical area. NB REF Shows the numer of calls refused. 4.7.8.3 CENTERS COUNTERS REINITIALIZATION (MENU 4-7-8-3) For the Call Manager (F5): Menu 4-7-3-3 (Centre counter re-initialisation)

IMPORTANT : This menu only appears if the PBX is configured in multi-site mode (menu 3.6 - Parameters management). CENTERS COUNTERS REINITIALIZATION ACTIVE SERVER: 001-SITE LOC, CCU: 2 COUNTRES:MAXIMUM FLOW REACHED CRITICAL AREA CALLS COUNTERS REFUSED CALL COUNTERS FOR THE CENTRE CONFIRMATION YES NO NO 02-centre_2 YES

----------------------------------------Figure 130: Reset the centre counters This menu is used to reset all or some of the CAC server counters on a centre-by-centre basis. Current throughput counters cannot be reset. ACTIVE SERVER: XXXXX, CCU: ZZ This line shows the name of the site where the active server and cluster number are located. Note : The user resets the counters of the site and cluster indicated in this line and in this way does not have to change the status of the local tables.

Page 140

11/2006

AMT/PTD/PBX/0053/2/2/EN

COUNTRES:MAXIMUM FLOW REACHED NO YES

If you select YES the counters are reset. CRITICAL AREA CALLS COUNTERS NO YES

If you select YES the counters are reset. REFUSED CALL COUNTERS NO YES

If you select YES the counters are reset. FOR THE CENTRE Select the name of a centre from those available. If you wish to reset the tables for all centres, simply select " ." . CONFIRMATION NO YES

If you select YES reset of the desired counters is confirmed. 4.7.8.4 CAC CLASS COUNTERS REINITIALIZATION (MENU 4-7-8-4) For the Call Manager (F5): Menu 4-7-3-4 (Class counters reinitialization) CLASS COUNTERS REINITIALIZATION ACTIVE SERVER: 001-SITE LOC, CCU: 2 COUNTRES:MAXIMUM FLOW REACHED CRITICAL AREA CALLS COUNTERS REFUSED CALL COUNTERS FOR THE CLASS CONFIRMATION YES NO YES ... YES

----------------------------------------Figure 131: Reset class counters This menu is used to reset all or some of the CAC server counters on a CAC class basis. Current throughput counters cannot be reset. ACTIVE SERVER: XXXXX, CCU: ZZ This line shows the name of the site where the active server and cluster number are located. Note : The user resets the counters of the site and cluster indicated in this line and in this way does not have to change the status of the local tables.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 141

COUNTRES:MAXIMUM FLOW REACHED NO YES If you select YES the counters are reset. CRITICAL AREA CALLS COUNTERS NO YES If you select YES the counters are reset. REFUSED CALL COUNTERS NO YES If you select YES the counters are reset. FOR THE CLASS Select the name of a class from those available. If you wish to reset the tables for all CAC classes, simply select " ." . CONFIRMATION NO YES If you select YES reset of the desired counters is confirmed. 4.7.8.5 CAC SERVERS STATUS (MENU 4-7-8-5) For the Call Manager (F5): Menu 4-7-3-5 (CAC servers status) IMPORTANT : This menu only appears if the PBX is configured in multi-site mode (menu 3.6 - Parameters management).

CAC SERVERS STATUS CENTER MAIN SECONDARY ---------------------------------------------01-CENTRE1 001-SITE1 002-SITE2 02-CENTRE2 001-SITE1 002-SITE2 03-CENTRE3 003-SITE3 004-SITE4 04-CENTRE4 ........ ........ 05-CENTRE5 ........ ........ 06-CENTRE6 ........ ........ ---------------------------------------------Figure 132: CAC servers status This menu is used to display the status of all the CAC servers in a multi-site configuration. For each center, the site containing the main CAC server and the site containing the secondary CAC server are displayed.

Page 142

11/2006

AMT/PTD/PBX/0053/2/2/EN

4.8

STARTUP ADMINISTRATION (MENU 4-8)


For Call Manager (F5): Menu 4-8 not available

START-UP ADMINISTRATION 1 SAVED START LOGBOOK 2 START-UP TEST RESULT ENTER YOUR CHOICE

----------------------------------Figure 133: Start-up administration

4.8.1

SAVED START LOGBOOK


START LOGBOOK 0 REC

HOUR

WORDING

COUNTER

----------------------------------Figure 134: Saved start logbook Display entered if the cabinet has been downloaded in secure mode from an M7420 Enterprise V4.1 Management Centre. The title of the menu gives the date / month / year of log reset, as well as the number of reports recorded. The reports are displayed at the rate of one line per report.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 143

4.8.2

STARTUP TEST RESULT

STARTUP TEST RESULT CARD 1-0A, CU ACTIVE OK OK OK OK OK OK OK OK OK OK OK OK OK OK

-TEST 1.1 FPGA InitializationOK -TEST 1.2 Micro Controlor Init. -TEST 1.3 EEPROM Initialization -TESR 1.4 Matrix Initialization -TEST 1.5 TMS loading -TEST 1.6 VOICE MAIL loading -TEST 2.1 Racks Identification -TEST 2.2 NMI Test -TEST 2.3 Time/date stamp test -TEST 2.4 PICs Test -TEST 2.5 HSCK Test -TEST 2.6 Matrix and TMS test -TEST 2.7 Modem test -TEST 2.8 RAM and DRAM test -TEST 2.9 Flash Memory tst

----------------------------------Figure 135: Start-up test result

This menu is used to view the list of tests executed during startup.

Page 144

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.

INSTALLER DATA (MENU 5)

For the Call Manager (F5): Menu 5 (Installer data) Levels 2 (Configuration transfer) and 3 (Connection management) are not available

INSTALLER DATA INSTALLER PASSWORD .....

Figure 136: Password for access to installer data INSTALLER DATA 1 PROCESSOR ACCESS 2 CONFIGURATION TRANSFER 3 CONNECTION MANAGEMENT 4 IDENTIFICATION 5 TONE AND ANNOUNCEMENT DEFINITION 6 SIGNALING MANAGEMENT 7 ALARM CONFIGURATION ENTER YOUR CHOICE .

---------------------------------------------------Figure 137: Installer data (F6) INSTALLER DATA 1 PROCESSOR ACCESS 2 IDENTIFICATION 3 TONE AND ANNOUNCEMENT DEFINITION 4 SIGNALING MANAGEMENT 5 ALARM CONFIGURATION ENTER YOUR CHOICE .

-------------------------------------------Figure 138: Installer data (F5) Note : Installer data is only available using the Installer access password. To access functions for telephony data, and system management and to access system administration functions, the manufacturer password is required.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 145

5.1

PROCESSOR ACCESS (MENU 5-1)


For the Call Manager (F5): Menu 5-1 (Processor access). PROCESSOR ACCESS 1 DEBUG TOOLS 2 FORMAT OF PAS FILES 3 DISPLAY OF PAS FILES 4 RESTART REQUEST ENTER YOUR CHOICE .

---------------------------------------------------Figure 139: Menu 5-1 (Processor access).

5.1.1

DEBUG TOOLS (MENU 5-1-1)


For Call Manager (F5): Unavailable When this menu is selected, the only option proposed is to send a PING request to a PTx card IP address.

5.1.1.1

SEND A PING REQUEST PING REQUEST SENDING

TO IP ADDRESS WITH IP CARD DATA SIZE

5 5

122.123.124.125 004 32 32 1000. NO

TIME TO LIVE OF THE IP DATAGRAM WAITING PERIOD (ms) CONFIRMATION

---------------------------------------------------Figure 140 : Debug tool Sending a PING request (F6) TO IP ADDRESS You can use this line to enter the IP address of the device that you wish to reach. This is the only line displayed in this menu. Once an IP address is entered, the line WITH IP THE CARD is displayed. WITH THE IP CARD This line is used to indicate the IP card to be used to send the PING request to the IP address mentioned above. The choice is made using a list of all the IP card slots in the cabinet. Once this line is filled in, the following lines are displayed.

Page 146

11/2006

AMT/PTD/PBX/0053/2/2/EN

DATA SIZE This line is used to modify the size of the IP packet to be transmitted. By default, the value is 32. Possible values range between 32 and 1024 bytes. TIME TO LIVE OF THE IP DATAGRAM This line is used to modify the packet's life duration (that is, the maximum number of routers crossed). The defualt value is the value used by the PTx cards. Possible values are between 1 and 255. WAITING TIMEOUT This line is used to define the waiting timeout for a reply from the pinged IP equipment. The default value is 1 second. Possible values are between 100 and 65500 ms. CONFIRMATION This line is used to generate the PING request with the data entered previously. The error message CARD OUT OF SERVICE appears if the IP card is not IN SERVICE, indicating that the request cannot be sent. If the execution report message is not received within the second, an error message NO REPLY RECEIVED is displayed to show that the MMC did not receive any reply. This may happen if the card is not in the software release that allows the sending of a PING request. 5.1.1.2 RECEIVING REPLIES TO PING REQUESTS

ENVOI D'UNE REQUETE PING

TO IP ADDRESS WITH THE IP CARD DATA SIZE

5 5

122.123.124.125 004 32 32 1000. NO

TIME TO LIVE OF THE IP DATAGRAM AVERAGE WAITING TIME (ms) CONFIRMATION RESPONSE OF 10.102.10.91 10.102.10.91 10.102.10.91 10.102.10.91 BYTES 32 32 32 32 TIME(ms) <20 <20 <20 <20

TTL 127 127 127 127

STAT. 10.102.32.73 -> 10.102.10.91 PACKETS: SENT=4, RECE.=4, LOST=0 TIME: MIN= 0, MAX= 0, MEDI.=

---------------------------------------------------Figure 141 : Moyen de Debug Rception dune requte PING (F6)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 147

RESULT LINES Each line awaits a PING response message. Once it is received, it is stored in a screen image for statistical analysis. These lines show the target IP equipment, the number of bytes sent, the request transmission and return time and the TTL placed for per equipment. If the reply from the remote device does not arrive in time, the character * is displayed to show that no reply has been received. If the reply does not arrive in less than 20 ms, the IP card will not be able to know the exact response time ; this is mentioned by placing the character < in front of the number 20. STAT: This line is used to view the PTx card IP addresses and the address of the request addressee. PACKETS: This line is used to view the packet transmission statistics (number of packets sent, received, and lost). TIME: This line is used to view the minimum, maximum and average packet transmission and reception time. The maximum time corresponds to the longest transmission and reception time observed, excluding the packets not received.. The minimum time is the shortest transmission and reception time observed, excluding the packets not received or packets whose transmission time was below or equal to 20 ms. The average time is the total transmission and reception time observed, excluding the packets not received or packets whose transmission time was below or equal to 20 ms, divided by the number of requests sent.

5.1.2

FORMAT OF PAS FILES (MENU 5-1-1)


For the Call Manager (F5): Menu 5-1-1 (Format of PAS files). FORMAT OF PAS FILES

DESCRIPTOR SELECTION FROM THE TABLE

100 T.D.D. ..

---------------------------------------------------Figure 142: Format of PAS files PAS files are data files which describe the installation configuration. This menu is therefore used to display these files by entering the PAS descriptor or the start rank of the table. All the PAS files are displayed in a fixed list with the descriptor number and name.

Page 148

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.1.3

DISPLAY OF PAS FILES (MENU 5-1-2)


For the Call Manager (F5): Menu 5-1-2 (Display of PAS files). DISPLAY OF PAS FILES DESCRIPTOR SELECTION AND THE TABLE STARTING RANK END RANK 100 T.D.D. .. .... ....

---------------------------------------------------Figure 143: Display of PAS files This MMC is used to display the address and contents of an element in a given table. Selection is by entering the PAS descriptor, the table number, and element rank (giving the element rank is optional). If the rank is not specified, the MMC selects the first element in the table. For a key code table, the screen displays both the address and the contents of the key code and the address and contents of the structure associated with the key code. At the top of the screen, the user interface indicates the format of the table (see previous paragraph). Tables with two indexes are displayed in the same way as tables with a single index: the number is the result of multiplying the two indexes together. For key code tables and tables with two indexes, the key code section of the table which is common to x elements in the sub-table is repeated for each element (customised abbreviated number, etc.).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 149

5.1.4

RESTART REQUEST (MENU 5-1-3)


For the Call Manager (F5): Menu 5-1-3 (Restart request). DEMANDE DE REDEMARRAGE INACTIVE DATA DATA FILE 1 -F6V162 DonG.2Aed9 00 FRA 22/07/05 14:27 R.ACTIVE VALID G.2Aed9 02/01/00 03:41

RESTART TYPE RESTART CONFIRMATION SECURITY

STANDARD YES DEACTIVATED

------------------------------------------------Figure 144: Restart request ACTIVE DATA DATA FILE 0 FILE NAME SOFTWARE RELEASE DATE TIME

Read-only line. Indicates the name of the active file and the date and time when the file was last saved. INACTIVE DATA DATA FILE 1 FILE NAME SOFTWARE RELEASE DATE TIME

Read-only line. Indicates the name of the inactive file and the date and time when the file was last saved. R.ACTIVE STATUS COMMERCIAL CODE DATE TIME

Read-only line. Indicates the status of the active directory (validated, test) and the corresponding commercial code as well as the date and time of the validation. R.INACTIVE STATUS COMMERCIAL CODE DATE TIME

Read-only line. Indicates the status of the inactive directory (validated, test) and the corresponding commercial code as well as the date and time of the validation. RESTART TYPE STANDARD CPU SWITCH

Select Standard as the restart type. For a duplex configuration, the CPU switch restart type causes a switchover from the active to the passive CPU card. The passive CPU card takes over and becomes active.

Page 150

11/2006

AMT/PTD/PBX/0053/2/2/EN

RESTART CONFIRMATION NO YES

Select YES to confirm the restart: the PBX will restart automatically. SECURISATION In the NeXspan C/S/L/D range, you may be required to restart the system in secure mode during update, restore, patch loading and switchover management operations from M7425 Enterprise (for further information, see the M7425 Enterprise User Manual Basic functions). On NeXspan C/S/L/D, two versions are kept in the memory: an active version and an passive version. Lors dun basculement, la version N-1 est conserve sur le PBX en version inactive, ce qui permet, en cas dchec, un retour en arrire. Lorsque le mode scuris est lanc, une phase de tests est droule. La dure de la priode de test ainsi que le temps restant avant la validation de la version logiciel sont alors affichs. Lorsque la phase de test est termine, si les tests sont positifs, la version N est valide sinon un retour la version N1 est effectu. Cette ligne, en lecture seule, permet de connatre le mode de scurisation lance depuis le centre de gestion : INACTIVATE Secured restart not activated. IMPLICIT VALIDATION BACKWARD At the end of the test phase, if the tests are positive, version N is automatically validated. At the end of the test phase, there is automatic return to version N-1.

TO PERFORM A TOTAL RESET: IMPORTANT : A total reset clears all data from existing programming. The system is then configured automatically with the equipment installed. 1. On the line "Restart type", select "Standard" and press Enter to confirm. 2. On the line "Restart confirmation", select "YES" and press Enter to confirm. 3. Enter "CO" while the startup tests are being performed. 4. Several tests are displayed then the system requests a password. Enter the default password "TOTAL". Press Enter to confirm. Note : If no password is requested, repeat the reset operation. 5. Wait for the system to run the test series, detect the installed cards, and configure itself automatically. This will take a few minutes. The system has reset successfully when the main menu is displayed.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 151

5.2

CONFIGURATION TRANSFER (MENU 5-2)


For the Call Manager (F5): this menu is not available. CONFIGURATION TRANSFER ---------- ZONE: RAMDISK 1 ---------REST 01/01/90 01:10 A6L3CDN FULL ---------- ZONE: RAMDISK 2 ---------REST 01/01/90 01:10 A6L3CDN FULL ---------- ZONE: FLASH EPROM ---------REST FULL TRANSFER MEDIUM DIRECTION OF TRANSFER SERIAL PORT FULL BACKUP

----------------------------------------------Figure 145: Menu 5-2 (Configuration transfer) RAM DISK1 and 2 areas contain the DATA (including directory data). These fields indicate the date and time of the last locked RAM restore/backup operations. The FLASH EPROM area indicates the date and time of the FLASH EPROM restore/backup operations. This area contains the software application code. TRANSFER MEDIUM SERIAL PORT PARALLEL PORT

Select the transfer medium:


DIRECTION OF TRANSFER FULL BACKUP

serial port: via a CPU card connector parallel port: using an additional loading card

RESTORE

Select the transfer direction: full backup or restore

Page 152

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.2.1

SERIAL PORT CONFIGURATION TRANSFER


When you validate the serial port as the transfer medium, the following screen is displayed: CONFIGURATION TRANSFER TRANSFER MEDIUM DIRECTION OF TRANSFER THGPT IDENTIFICATION CONFIRMATION SERIAL PORT FULL BACKUP 19200 .................... NO

----------------------------------------------Figure 146: Serial port configuration transfer THGPT 300 1200 2400 4800 9600 19200 38400 57600 115200

Select the transfer rate (in bauds). IDENTIFICATION Enter in this field the identification of the item to be transferred. CONFIRMATION NO YES

Select YES to validate the throughput and the item identification. Note : On restart, the system will reset automatically.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 153

5.2.2

PARALLEL PORT CONFIGURATION TRANSFER


When you validate the parallel port as the transfer medium, the following screen is displayed. CONFIGURATION TRANSFER transfer mediUM DIRECTION OF TRANSFER IDENTIFICATION RAM DISK TRANSFER FLASH PROM TRANSFER CONFIRMATION PARALLEL PORT FULL BACKUP .. YES YES NO

---------------------------------------------Figure 147: Parallel transfer of the configuration IDENTIFICATION Enter in this field the identification of the item to be transferred. RAM DISK TRANSFER NO YES

If you enter YES, customer data is transferred. FLASH PROM TRANSFER NO YES

If you enter YES, the application software is transferred. ATTENTION :This file can be up to several megabytes in size.

Page 154

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.3

CONNECTION MANAGEMENT (MENU 5-3) NOT IN VALUES


For the Call Manager (F5): this menu is not available. CONNECTION MANAGEMENT CALL 1 - PHYSICAL SLOT A - PHYSICAL SLOT B - PHYSICAL SLOT C - TONE - COMMAND TYPE CALL 2 - PHYSICAL SLOT A - PHYSICAL SLOT B - PHYSICAL SLOT C - TONE - COMMAND TYPE .. .. .. SILENCE disconnect.

.. .. .. SILENCE disconnect.

-------------------------------------------------Figure 148: Menu 5-3 (Connection management) This menu is used to set up unilateral, bilateral or 3-party connections between designated circuits on tones, on demand. This menu offers the possibility of setting up 2 separate calls and to check the PBX transmission plan, between TRK -> SET and SET -> TRK (PSTN check). CALL 1 PHYSICAL SLOT A Indicate the physical slot of the first equipment for the first call. PHYSICAL SLOT B Indicate the physical slot of the second equipment for the first call. PHYSICAL SLOT C Indicate the physical slot of the third equipment for the first call. TONE SILENCE TONE 330 HZ TONE 440 HZ HIGH INTERNAL MUSIC TONE 440 HZ LOW EXTERNAL MUSIC

TONE 440 + 330 HZ Select the type of tone (call 1).

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 155

COMMAND TYPE DISCONNECT. CONNECTION A <--> B CONF A TR, B/C REC CONNECT A --> B CONNECTION TONE --> A A LOOP B1 CHANNEL CONNECTION B --> A CONFERENCE A-B-C A LOOP B2 CHANNEL

On this line, indicate the type of connection to be set up (call 1). CALL 2 PHYSICAL SLOT A Indicate the physical slot of the first equipment for the second call. PHYSICAL SLOT B Indicate the physical slot of the second equipment for the second call. PHYSICAL SLOT C Indicate the physical slot of the third equipment for the second call. TONE SILENCE TONE 330 HZ TONE 440 HZ HIGH INTERNAL MUSIC TONE 440 HZ LOW EXTERNAL MUSIC

TONE 440 + 330 HZ Select the type of tone (call 2). COMMAND TYPE DISCONNECT. CONNECTION A <--> B CONF A TR, B/C REC

CONNECT A --> B CONNECTION TONE --> A A LOOP B1 CHANNEL

CONNECTION B --> A CONFERENCE A-B-C A LOOP B2 CHANNEL

On this line, indicate the type of connection to be set up (call 2).

Page 156

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.4

IDENTIFICATION (MENU 5-4)


For the Call Manager (F5): Menu 5-2 (Identification). IDENTIFICATION 1 SOFTWARE IDENTIFICATION 2 IDENTIFICATION OF MULTISITE SITES 3 DISPLAY DIGITAL SET NAMES 4 MANAGEMENT OF DIGITAL SET NAMES ENTER YOUR CHOICE .

-------------------------------------------------Figure 149: Identification (F5) IDENTIFICATION 1 SOFTWARE IDENTIFICATION 2 HARDWARE IDENTIFICATION 3 IDENTIFICATION OF MULTISITE SITES 4 DISPLAY DIGITAL SET NAMES 5 MANAGEMENT OF DIGITAL SET NAMES ENTER YOUR CHOICE .

-------------------------------------------------Figure 150: Identification (F6)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 157

5.4.1

SOFTWARE IDENTIFICATION (MENU 5-4-1)


For the Call Manager (F5): Menu 5-2-1 (Software identification)

SOFTWARE IDENTIFICATION IDENTIFICATION BOOT PROM. APPLIC. MMI LANGUAGE: DS. LANGUAGE : Call Manager R4.1 F5V161 GenG.1Aed7 fra

XF-French XF-French French

Figure 151: Software identification (F5) IDENTIFICATION LOGICIELLE BOOT PROM. BOOT BUD1V31Gen3.1Aed3 03 FRA ACTIVE DIRECTORY Soft.Rel. 4.2 VALID 000 UT1V162GenG.2Aed4 03 FRA PRD SYS + 001 F6V162 GenG.2Aed9 00 FRA PRD APP + 002 F6V162 RamG.2Aed9 00 FRA RAMDISK + 003 qr835mevo_or ././00 APPLIC. + 004 qr640aas.1v1 ././00 APPLIC. + 005 qr821aae.110 ././00 APPLIC. + 006 qr836aaf.130 ././00 APPLIC. + 007 qs245aaf.100 ././00 APPLIC. + MMI LANGUAGE: DS. LANGUAGE : 0-08 TMS XF-FRANCAIS XF-FRANAIS FrancaisEnglish Deutsch TMS 3 XF01 V0.9

---------------------------------------Figure 152: Software identification (XD) SOFTWARE IDENTIFICATION 0-08 TMS TMS 3 XF01 V0.5 1-01 PTx 32 VOI PT2V41 Gen4.1Aed7 02 FRA 1-07 LA16X 16 A ANA XF01 V1.0 ---------------------------------------Figure 153: Software identification (continued) (XD) This menu shows:

the software release installed on the card the composition of the active directory (production, elementary ML overloads, patches) and its status (validated, test), the composition of the inactive directory elementary ML overloads, patches) and its status (validated, test) the list of languages available for the MMIs, the list of languages available on digital sets, the software releases of the cards. (production,

Page 158

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.4.2

HARDWARE IDENTIFICATION (MENU 5-4-2)


For the Call Manager (F5): this menu is not available. IMPORTANT : This menu is only displayed for NeXspan C/S/L systems (F6). This menu is used to display the hardware status of a PBX (slots of cards installed in PBX, card type, item code, serial number, quantity, etc.) HARDWARE IDENTIFICATION FROM THE EQUIPMENT ...

---------------------------------------Figure 154: Hardware identification (F6) FROM THE EQUIPMENT Enter the slot from which the hardware identification is made. For a hardware identification of the entire PBX (including CPU card), leave the field empty and press Enter to validate. Note : In an XD, the slots are numbered from 100 to 115 (main cabinet), from 200 to 215 (first expansion cabinet) and from 300 to 315 (second expansion cabinet). Dans un XL, les emplacements sont numrots de 100 113 (coffret principal), de 200 213 (premier coffret dextension) et de 300 313 (deuxime coffret dextension). Dans un XS, les emplacements sont numrots de 100 102 (coffret principal) et de 200 202 (coffret dextension). Press Enter to confirm. The following screen is displayed: HARDWARE IDENTIFICATION UCT.-UCT1L CNMHJ4612AA01 NMNMP031001995 LAN 1 1 SYNC 1 1 HDLC 1 1 TMS 3 1 MEVO 1 4 MEMO 1 32768 ITTS 1 24 MEMF 1 16384 LPT 1 1 RAM 1 32768 FLASH 1 32768 SRAM 1 2048 DPRAM 1 256 ----------------------------------------

Figure 155: Hardware identification (example of an XL cabinet)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 159

HARDWARE IDENTIFICATION 1-01-LD4Xi CNMHJ4699AB02 T0/S0 2 4 ADPCM 0 1 1-06-LN16XI CNMHJ4475AB01 NUM 1 16

NMNMP041103804

NMNMP040903781

1-07-LA16XI CNMHJ4431AA01 NMNMP040703993 ANA 1 16 ---------------------------------------Figure 156: Hardware identification (example of an XL cabinet) Note : If an ADPCM card is installed on the CPU cards of NeXspan S or NeXspan C PBXs, the "ADPCM" field is displayed in the hardware identification menu. Adding the ADPCM daughter board enables you to use the 4-channel function on the CPU card's ISDN ports. The cards installed in the PBX are listed from the slot selected. The following information is displayed for each slot occupied:

card)

position of the card in the PBX (no slot indicated for UCT card type (UCT, LA16X, PTx, LD4X...), card item code serial number resource name variant number (factory number) quantity.


Example 1: 1-06 Card position CNMHHJ4475AB01 item code NUM Resource

LN16X Type of card NMNMP040903781 Serial number 1 Variant

16 Quantity

Note : The variant of T0/S0 and/or T0 equipment on NeXspan S and NeXspan C PBXs is used to distinguish PBXs with a component for synchronisation by the M bit in the S frame (variant= 2) from PBXs without this component (variant = 1).

Page 160

11/2006

AMT/PTD/PBX/0053/2/2/EN

Example 2: 1-01 Card position CNMHHJ4699AB02 item code T0/S0 Resource ADPCM Resource LD4Xi Type of card NMNMP041103781 Serial number 2 Variant 0 Variant

4 Quantity 1 Quantity

Note : If the LD4X card is not equipped with an ADPCM16 daughter card, the line that presents the ADPCM resource is not displayed.

5.4.3

IDENTIFICATION OF MULTI-SITE SITES (MENU 5-4-3)


For the Call Manager (F5): Menu 5-2-2 (Identification of multi-site sites) Note : This menu is only accessible in a multi-site configuration. IDENTIFICATION OF MULTISITE SITES NAME OF SITE HARDWARE AND SOFTWARE TYPE ---------------------------------------------010-SITE10 06XL F6V151 GenF.1Aed1 03 FRA 011-SITE11 06XL F6V151 GenF.1Aed1 03 FRA 012-SITE12 06XL F6V151 GenF.1Aed1 03 FRA ---------------------------------------------Figure 157: Identification of multi-site sites This menu indicates, for each of the sites on a multi-site configuration, the remote PBX type and the associated software release.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 161

5.4.4

DISPLAY DIGITAL SET NAMES (MENU 5-4-4)


For the Call Manager (F5): Menu 5-2-3 (Display digital set names) DISPLAY DIGITAL SET NAMES MODEL No. NAME ------------------------------------0 DIGITAL SET 1 640N 2 640NV24 3 640N +600 4 640NV+600 5 405-E 6 405-L 10 410N-ML 11 620N 12 620NV24 13 620N +600 14 620NV+600 20 420-ML 21 420E-ML -------------------------------------------------Figure 158: Display digital set names DISPLAY DIGITAL SET NAMES 22 23 24 25 40 41 42 43 44 49 50 51 52 53 54 55 420EMLV24 420N 420N +500 420N+2500 520 520+600 520N 520N +500 520N+2500 730 720 740 760 760+ 700 760+ 700 760x

-------------------------------------------------Figure 159: Display digital set names (continued)

Page 162

11/2006

AMT/PTD/PBX/0053/2/2/EN

DISPLAY DIGITAL SET NAMES


56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 128 760x+ 700 760x+2700 780 780+ 700 780+2700 780+3700 780x 780x+ 700 780x+2700 780x+3700 i740 725 i760 i760+ 700 i760+2700 400

-----------------------------------

Figure 160: Display digital set names (continued) DISPLAY DIGITAL SET NAMES
129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 401 405 410 410N 410NV24 420 420V24 420E 420EV24 510 510V24 610 610V24 620 620V24 640

-----------------------------------

Figure 161: Display digital set names (continued) DISPLAY DIGITAL SET NAMES
145 146 147 640V24 640+600 640V +600

-----------------------------------

Figure 162: Display digital set names (end) These screens display the correspondence between the model numbers of the digital sets and the names by which they are identified. MODEL No. The set model number. NAME The name allocated to the model number.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 163

5.4.5

MANAGEMENT OF DIGITAL SET NAME (MENU 5-4-5)


For the Call Manager (F5): Menu 5-2-4 (Management of digital set names) MODIFICATION OF DIGITAL SET NAMES MODEL No. NAME TO APPLY ACTION ........ .................... ........

-------------------------------------------------Figure 163: Modification of digital set names This menu is used to add new names to the list in the event of release of new telephones on the market or to customise the set names according to the distributor. Each set model is designated by a name which is shown when the extension characteristics are displayed. MODEL NO. Enter the model number using 3 digits. Note : If the number has not already been defined, the associated name is displayed automatically.

NAME TO BE ASSIGNED Enter the name to be assigned to the model using up to 20 characters. ACTION Select the current type of action: add modify, or delete. Note : The name is assigned when the field Action is validated.

Page 164

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5

TONE AND ANNOUNCEMENT DEFINITION (MENU 5-5)


For the Call Manager (F5): Menu 5-3 (Tone and announcement definition). Pre-recorded messages are sound files (.wav) linked to system tones. The tones correspond to the different states of a telephone call. A pre-recorded message or music can be linked to each PBX system tone. The PBX supports 128 tones (numbered from 0 to 127) divided up as follows:

80 so-called system tones (from 0 to 63 and 112 to 127) 48 definable tones (from 64 to 111) for customising prerecorded messages depending on the spoken language or the company/department pair.

In XD/XL/XS/XC cabinets, the pre-recorded messages and announcements are integrated in the CPU card: PBX Type XD XL XS XC CPU card UCT-D UCT-L UCT-S UCT-C Daughter card 2 FMEVO 2 FMEVO 1 FMEVO

Table 1: Voice cards in the NeXspan C/S/L/D range (XD, XL, XS and XC) FMEVO daughter cards do not alter the capacity of synchronous announcements (they each provide 2 additional IVB voicemail channels). TONE AND ANNOUNCEMENT DEFINITION 1 2 3 4 5 6 7 8 TONE DEFINITION ANNOUNCEMENT MESSAGES ON SVF-BVF DEFINITION OF SPOKEN LANGUAGES ALLOCATION OF TONES TO LANGUAGES COMPANY/DEPARTMENT SPECIFIC TONES DEFINITION OF DIRECT ACCESS MESSAGES DISPLAY DEFINABLE TONES EXTENNAL MUSIQUE LEVEL ADJUST. .

ENTER YOUR CHOICE

------------------------------------------------Figure 164: Menu 5-5 (Tone and announcement definition - F6). TONE AND ANNOUNCEMENT DEFINITION 1 2 3 4 5 6 TONE DEFINITION DEFINITION OF SPOKEN LANGUAGES ALLOCATION OF TONES TO LANGUAGES COMPANY/DEPARTMENT SPECIFIC TONES DEFINITION OF DIRECT ACCESS MESSAGES DISPLAY DEFINABLE TONES .

ENTER YOUR CHOICE

-------------------------------------------------

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 165

Figure 165: Menu 5-5 (Tone and announcement definition - F5).

5.5.1

TONE AND ANNOUNCEMENT DEFINITION (MENU 5-5-1)


For the Call Manager (F5): menu 5-3-1 SELECTION OF AN INTERNAL TYPE TONE OR NETWORK TONE OR DEFINABLE, NUMBER (64 to 111) .. .. ...

-------------------------------------------------Figure 166: Selection of tone type Menu 5-5-1 is used to configure the various tones and link them to pre-recorded messages, by indicating the card type supporting the messages (CC1, BVF, CCS, SVF-BVF), the slot number of the card in the PBX and the number of the message linked to the tone. INTERNAL NORMAL DIAL TONE ROUTING INTRUSION TONE NETWORK RINGBACK TONE RESTRICTION FAIL CONGESTION TONE WAKE-UP RECALL MINIMUM CREDIT CONSULT. CALL NO INTR. VAR FRWD ACTIV DISA PASSWORD EXTERNAL DIAL TONE ON BUSY WARNING INTERNAL EXT. O.S. PROGRAM AGENDA TONE UNKNOWN NUMBER TONE MSG IN BOX CONSULT. CALL INTRUS. SINGLE CALL NO INTR. AUTO CALLBACK ACTIV DIRECTORY ENQUIRY INTERNAT. DIAL TONE INTERNAL ON HOLD TONE INTERN. RINGBACK TONE EXTERNAL O.S.. CALL ACCEPTED TONE ENTER PASSWORD ZERO CREDIT SINGLE CALL INTRUSION D.N.D ACTIV PREDEF. CBACK ACTIV

NORMAL DIAL TONE Internal tone EXTERNAL DIAL TONE INTERNAT. DIAL TONE ROUTING ON BUSY Dial tone on external line International dial tone Call routing in progress (silence) Busy

Page 166

11/2006

AMT/PTD/PBX/0053/2/2/EN

INTERNAL ON HOLD TONE INTRUSION TONE WARNING INTERN. RINGBACK TONE NETWORK RINGBACK TONE INTERNAL EXT. O.S. EXTERNAL O.S.. RESTRICTION FAIL PROGRAM AGENDA TONE CALL ACCEPTED TONE CONGESTION TONE UNKNOWN number TONE ENTER PASSWORD WAKE-UP RECALL MSG IN BOX ZERO CREDIT MINIMUM CREDIT CONSULT. CALL INTRUS. SINGLE CALL INTRUSION CONSULT. CALL NO INTR. SINGLE CALL NO INTR. D.N.D ACTIV VAR FRWD ACTIV AUTO CALLBACK ACTIV PREDEF. CBACK ACTIV DISA PASSWORD DIRECTORY ENQUIRY

Internal on-hold tone Interrupt during call Warning Automatic internal callback Automatic network or tie-line callback Internal extension out of service External line out of service Barred number, call not allowed Programmed reminder Function accepted Overflow, call cannot be connected Number unknown Personal code Automatic callback requested Voicemail waiting Prepayment empty Prepayment nearly empty Enquiry call with intrusion privilege Single call with intrusion privilege Enquiry call without intrusion privilege Single call without intrusion privilege Do not disturb activated Variable forwarding activated Automatic callback activated Predefined automatic callback activated Personal code for DISA Directory enquiry

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 167

Select an internal tone.

Page 168

11/2006

AMT/PTD/PBX/0053/2/2/EN

OR NETWORK TONE EXTERNAL DIAL TONE BF ANS: FWD OPCO FREE AP REP AB OCC BF ANS: DAY DISSUA EXTERNAL DIAL TONE INTERNAL ON HOLD TONE NETWORK HOLD BF ANS: EXT free BF ANS: fwd OPco free <:CS "MMI.PARAMETER" 2>AF ANS: EXT FREE<:/CS> INTERNAL ON HOLD TONE AF ANS: EXT FRE BF DAY RING BF ANS: NIGHT DISSUA NETWORK HOLD AF ANS: opco FREE BF NIGHT RING AF ANS: DAY DISSUA BF ANS: EXT FRE AV REP AB OCC MEET-ME PAGING AF ANS: NIGHT DISSUA

Dial tone on external line Internal on-hold tone Network on-hold tone Ringing before answer on free extension (subscriber or operator) Ringing before answer on free CAP (Central Answering Position) or night console extension number Ringing after answer on free extension (subscriber or operator)

AF ANS: OPCO FREE Ringing after answer on free CAP or night console extension number <:CS "MMI.PARAMETER" 2>BF ANS: EXT BUSY<:/CS> AP REP AB OCC BF DAY RING BF NIGHT RING MEET-ME PAGING BF ANS: DAY DISSUA BF ANS: NIGHT DISSUA AF ANS: DAY DISSUA AF ANS: NIGHT DISSUA Select a network tone. Note : The tones can be customised in multi-company configuration in the same was as announcements can be customised according to the user's language. Ringing before answer on busy extension

Tone after answer on busy extension Ringing before answer on day service Ringing before answer on night service Awaiting response from person paged Dissuasion before answer on day service Dissuasion before answer on night service Dissuasion after answer on day service Dissuasion after answer on night service

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 169

OR DEFINABLE, NUMBER (64 TO 111) Enter the number of a definable tone in 3 digits (from 64 to 111). These tones are unused on system start-up. When created, a definable tone replaces an existing tone. To select a definable tone you need to run the following MMCs:

menu Allocation of tones to languages menu Company/department specific tones

These allocations are valid for both operation types: single and multi-company. 5.5.1.1 SELECTION OF A TONE NORMAL DIAL TONE SIGNAL TYPE ORIGIN NUMBER 1 PEAK DURATION (UNIT 10 MS) TROUGH DURATION (UNIT 10 MS) ORIGIN NUMBER 2 PEAK DURATION (UNIT 10 MS) TROUGH DURATION (UNIT 10 MS) TONE 330Hz TONE ..... 0.... UNDEFINED ..... 0....

-------------------------------------------------Figure 167: Normal dial tone SIGNAL TYPE TONE ANNOUNCE MENT ANNOUNCEMENT OR TONE MULTISITE ANNOUNCEMENT (Multi-site only) configuration

Select the signal type. IMPORTANT : When you select DIAL TONE, you can combine origins (numbers 1 and 2) in the menu. However, when you select ANNOUNCEMENT, you only have one origin ANNOUNCEMENT FROM. In this latter case, this new selection appears on screen. ORIGIN NUMBER 1 TONE 330 HZ *MUSIC TONE 440 HZ HIGH SILENCE TONE 440 HZ LOW TONE 440 + 330 HZ

Select origin number 1 or modify the existing origin. * INTERNAL MUSIC (1 melody)

Page 170

11/2006

AMT/PTD/PBX/0053/2/2/EN

PEAK DURATION (UNIT 10 MS) Number of 10 ms units for defining peak duration. TROUGH DURATION (UNIT 10 MS) Number of 10 ms units for defining trough duration. ORIGIN NUMBER 2 TONE 330 HZ *MUSIC TONE 440 HZ HIGH UNDEFINED TONE 440 HZ LOW SILENCE TONE 440 + 330 HZ

Select origin number 2 or modify the existing origin. * INTERNAL MUSIC (1 melody) PEAK DURATION (UNIT 10 MS) Number of 10 ms units for defining peak duration. TROUGH DURATION (UNIT 10 MS) Number of 10 ms units for defining peak duration. ANNOUNCEMENT FROM Select the origin of the announcement. EXTERNAL MUSIC ANALOG EXTENS. SVF-BVF

SLOT/CARD/EQT OR MESSAGE NUMBER This line is displayed for an ANALOGUE EXTENS. or SVF-BVF selection. Enter the card/equipment number to be connected or the message number (from 1 to 8). OPTION: LISTENING DEVICE: CABINET CARD EQTThis option is used to set up a connection between the equipment which emits the tone (analogue or digital set) and the control equipment. Enter the cabinet number and the listening device card number (5 digits). Note : The field E-TONE indicates that the tone can be put in service. Use a prefix to request that a message be replaced by a tone or vice-versa (see the menu for accessing voice announcement features).

ANNOUNCEMENT DURATION (SEC) By default the duration is unlimited. To limit the duration, enter the desired duration here (limiting the listening time releases TSs more rapidly for other synchronised use). It is advisable to take account of the length of the recorded message.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 171

OVERFLOW ON COMMON TIMESLOTS ALLOWED YES NO

Select YES to specify whether the TS output search can use the common TSs on the card (SVF-BVF). ORIGIN SITE (SIGNAL TYPE: MULTISITE ANNOUNCEMENT) Select an origin site. ORIGIN CLUSTER (SIGNAL TYPE: MULTISITE ANNOUNCEMENT) Enter a numerical value from 2 to 99. Note : The MMC does not check that there is a device in the cluster site specified. For an internal site, the cluster number is 2. DEVICE NUMBER (SIGNAL TYPE: MULTISITE ANNOUNCEMENT) Enter a numerical value from 0 to 767. NUMBER OF AUTHORISED CONNECTIONS (SIGNAL TYPE: MULTISITE ANNOUNCEMENT) Enter a numerical value from 0 to 32. Example: Signal type - Tone BUSY TONE SIGNAL TYPE ORIGIN NUMBER 1 PEAK DURATION (UNIT 10 MS) TROUGH DURATION (UNIT 10 MS) ORIGIN NUMBER 2 PEAK DURATION (UNIT 10 MS) TROUGH DURATION (UNIT 10 MS) TONE TONE 440 LOW 50... 50... TONE 440 LOW 50... 50...

-------------------------------------------------Figure 168: Busy tone Example: Signal type Announcement or Tone CALL ACCEPTED TONE SIGNAL TYPE ORIGIN NUMBER 1 PEAK DURATION (UNIT 10 MS) TROUGH DURATION (UNIT 10 MS) ORIGIN NUMBER 2 PEAK DURATION (UNIT 10 MS) TROUGH DURATION (UNIT 10 MS) ANNOUNCEMENT OR TONE TONE 440 LOW 20... 20... TONE 440 LOW 20... 500..

ANNOUNCEMENT FROM VOCT ROM MESSAGE EQT OR NO CARD BOX MSG 3.... OPTION: Listening device: cabinet card eqt .... -------------------------------------------------Figure 169: Call accepted tone

Page 172

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5.2

ANNOUNCEMENTS (MENU 5-5-2)


For the Call Manager (F5): this menu is not available. Menu 5-5-2 contains the functions for the management of messages and announcements recorded on the SVF-BVF voice card. ANNOUNCEMENT MESSAGES ON SVF-BVF 1 2 3 4 5 SVF-BVF: SVF-BVF: SVF-BVF: SVF-BVF: SVF-BVF: VIEW ANNOUNCEMENTS ANNOUNCEMENT ALLOCATION OBSERVE COUNTERS RESET COUNTERS RECORD ANNOUNCEMENTS .

ENTER YOUR CHOICE

-------------------------------------------------Figure 170: Menu 5-5-2 (Announcements - F6) The recorded messages and announcements are integrated in the CPU card: PBX Type XD (F6) XL (F6) XS (F6) XC (F6) CPU card UCT-D UCT-L UCT-S UCT-C Daughter card 2 FMEVO 2 FMEVO 1 FMEVO

Figure 171: Summary of voice cards installed in F6 PBXs

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 173

5.5.2.1

DISPLAY ANNOUNCEMENTS (MENU 5-5-2-1) For the Call Manager (F5): this menu is not available. SVF-BVF: VIEW ANNOUNCEMENTS MSG LOC NAME DUR SY NS TO DUR ---------------------------------------------------0-06 1 AVIVALDI.WAV 31 0 0 12 0-06 2 AXF511.WAV 8 0 0 45 0-06 3 AXF512.WAV 8 0 0 26 0-06 4 AXF513.WAV 8 0 0 28 0-06 5 AXF514.WAV 8 0 0 13 0-06 6 AXF515.WAV 8 0 0 27 0-06 7 AXF516.WAV 8 0 0 15 0-06 8 AXF517.WAV 8 0 0 17 0-06 9 AXF518.WAV 8 0 0 16 0-06 10 AXF521.WAV 8 0 0 29 0-06 11 AXF522.WAV 8 0 0 33 0-06 12 AXF53.WAV 32 0 0 34 0-06 13 AXF54.WAV 16 0 0 35 0-06 14 AXF551.WAV 16 0 0 36

Figure 172: View announcements (F6) This menu is used to:

BVF)

display the messages in the voice cards (BVF, CCS, SVFlist the various uses of messages summarise the allocation of TSs to messages

The table displays the following details SYNC (location): LOC (message): NAME: DUR: SY: NS: TO: DUR: card slot in the cabinet message number

message label duration of the recording number of TSs reserved for synchronised messages number of TSs reserved for unsynchronised messages number of the first tone using the message duration of message playback

Note : Messages not defined, not used, or with no TS allocated are not displayed.

Page 174

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5.2.2

ANNOUNCEMENT ALLOCATION (MENU 5-5-2-2) For the Call Manager (F5): this menu is not available. SVF-BVF: ANNOUNCEMENT ALLOCATION BOARD PHYSICAL SLOT-MSG NUMBER NUMBER OF SYNCHRONIZED OUTPUTS EXISTENCE OF NOT SYNC. OUTPUT YES NUMBER OF COMMON OUTPUTS 20 0061.. 0.

-----------------------------------------------------Figure 173: Announcement distribution BOARD PHYSICAL SLOT-MSG NUMBER Enter the cabinet number, card number, and message number (6 characters). This field is used to identify the message initialised in the cabinet and card. Note : In an XD/XL/XS/XC, the slot number of the virtual MEVO (voice mail) card is 006. Enter 006 + the message number.

NUMBER OF SYNCHRONIZED OUTPUTS Enter the number of synchronised outputs in 2 digits. Note : This field only appears if the first field has been validated.

EXISTENCE OF NOT SYNC. OUTPUT NO YES

Select YES to confirm the existence of unsynchronised outputs. Note : This field only appears if the first field has been validated.

NUMBER OF COMMON OUTPUTS Read-only line. Enter 2 digits to indicate the number of remaining common TSs updated by the modification of the other fields. Note : The message "Full Table" only appears if there are no more common TSs.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 175

5.5.2.3

COUNTER OBSERVATION (MENU 5-5-2-3) For the Call Manager (F5): this menu is not available. SVF-BVF: OBSERVE COUNTERS COMMON SYNC MSG TONE LOC NOT SYNC ---------------------------------------2 0-06- 15 0 0 0 0 12 0-06- 23 0 0 0 0 13 0-06- 4 0 0 0 0 15 0-06- 6 0 0 0 0 16 0-06- 8 0 0 0 0 17 0-06- 7 0 0 0 0 26 0-06- 2 0 0 0 0 27 0-06- 5 0 0 0 0 28 0-06- 3 0 0 0 0 29 0-06- 9 0 0 0 0 30 0-06- 14 0 0 0 0 31 0-06- 16 0 0 0 0 33 0-06- 10 0 0 0 0 34 0-06- 11 0 0 0 0 ---------------------------------------Figure 174: Observe counters (F6) This menu displays the number of connections per tone number, and is used to optimise TS distribution. The table displays the following details COMMON (tone): SYNC (location): LOC (message): TONE (synchronisation): LOC (common): : FAILED (not synchronised): : NOT SYNC (failed): Tone number Card rack position Message number Number of connections on synchronised TS Number of connections on common TS Number of connections on not synchronised TS Number of failed connections

Note : Only tones using a CCS message are displayed, maximum 128 lines.

Page 176

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5.2.4

SVF-BVF: RESET COUNTERS (MENU 5-5-2-4) For the Call Manager (F5): this menu is not available. SVF-BVF: COUNTERS RESET COMMON SYNC MSG TONE LOC NOT SYNC ---------------------------------------2 0-06- 15 0 0 0 0 12 0-06- 23 0 0 0 0 13 0-06- 4 0 0 0 0 15 0-06- 6 0 0 0 0 16 0-06- 8 0 0 0 0 17 0-06- 7 0 0 0 0 26 0-06- 2 0 0 0 0 27 0-06- 5 0 0 0 0 28 0-06- 3 0 0 0 0 29 0-06- 9 0 0 0 0 30 0-06- 14 0 0 0 0 31 0-06- 16 0 0 0 0 33 0-06- 10 0 0 0 0 34 0-06- 11 0 0 0 0 ---------------------------------------Figure 175: Reset counters (F6) This menu displays the number of connections, and is used to reset the counters. The table displays the following details COMMON (tone): SYNC (location): LOC (message): TONE (synchronisation): LOC (common): : NOT SYNC (failed): Tone number Card rack position Message number Number of connections on synchronised TS Number of connections on common TS Number of failed connections

FAILED (not synchronised): : Number of connections on not synchronised TS

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 177

5.5.2.5

RECORD ANNOUNCEMENTS (MENU 5-5-2-5) For the Call Manager (F5): this menu is not available. SVF-BVF: RECORD ANNOUNCEMENTS PHYSICAL SLOT OF SOURCE BOARD PHYSICAL EQUIPMENT CATALOGUE NUM/GUIDE - LABEL - DURATION IN SEC. RECORDING PARAMETERS - CATALOGUE-MIXED GUIDE - RECORDING LEVEL - ATTENUATE MUSIC BY VOICE start recording .. YES YES

Figure 176: Record announcements This menu is used to record customised announcements using a digital or analogue set, and to replace the pre-configured announcements on the card with new announcements. To update messages (also called announcements) on a UCT card (F6), you need the M7420 Update tool. For messages written in Flash PROM, a list showing the location and length of each message is displayed. Synchronised messages are broadcast from the beginning. This menu can therefore be used to listen to the different message on the card without having to temporarily define a definable tone. Note : Accessing this menu puts the set out of service: it is therefore not recommended to access this menu unnecessarily. PHYSICAL SLOT OF SOURCE Enter the equipment number of the set from which the announcement will be recorded (5 digits). BOARD PHYSICAL EQUIPMENT Enter the equipment number of the card containing the pre-configured announcements (006 for XD/XL/XS/XC) Note : For XD/XL/XS/XC, the voice mail system's virtual card on the UCT board contains pre-configured annoncements. Its equipment number is 006.

Page 178

11/2006

AMT/PTD/PBX/0053/2/2/EN

CATALOGUE NUM/GUIDE Enter the catalogue number (if different from 0) and the announcement number (value between 1 and 255). When the bothway connection is made with the first time interval allocated to the message function, you can listen to the selected message. Note : To view the number of an announcement, display the announcement list.

LABEL When the announcement number is validated, enter the message name. DURATION IN SEC. When the announcement number is validated, enter the message duration. RECORDING PARAMETERS CATALOGUE-MIXED GUIDE Enter the catalogue number (if different from 0) and the number of the announcement to be mixed (value between 1 and 255). This field is only filled in if mixing is requested. Therefore, the announcement which will be combined with another announcement must logically be a background melody on which another message is to be superimposed. RECORDING LEVEL Enter the recording level (value between 1 and 255). ATTENUATE MUSIC BY VOICE NO YES

Select YES to lower the music level when someone speaks: this parameter is also known as "fading". START RECORDING NO YES

Select YES to start recording the message. During the operation, the message "Work In Progress" is displayed. When the card detects the end of the operation, the recording stops and the message is played back. After playback, you can make further recordings with different recording and sound levels.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 179

5.5.3

DEFINITION OF SPOKEN LANGUAGES (MENU 5-5-3)


For the Call Manager (F5): Menu 5-3-2 (Definition of spoken languages). DEFINITION OF SPOKEN LANGUAGES LANGUAGE NAMED FRENCH WITH REGARD TO EXTENSION CORRESPONDS TO 0. LANGUAGE NAMED ENGLISH. WITH REGARD TO EXTENSION CORRESPONDS TO 0. LANGUAGE NAMED DEUTCH.. WITH REGARD TO EXTENSION CORRESPONDS TO 0. LANGUAGE NAMED ........ LANGUAGE NAMED LANGUAGE NAMED LANGUAGE NAMED LANGUAGE NAMED ........ ........ ........ ........ 0. 1. 2.

Figure 177: Definition of spoken languages The MMC is used to associate a code number with a language name. The languages are used for messages from a broadcasting device connected to analogue sets. These messages are allocated to definable tones according to their use. LANGUAGE NAMED Enter the language name on this line (maximum 8 characters). WITH REGARDS TO EXT CORRESPONDS TO Enter a language code on 2 digits: for example, the first language name defined takes code 0, the second takes code 1, and so on. Allocation of the created language is carried out for each user in menu 1-1-1 (Extension Characteristics) in the field "Spoken Language" which appears after definition has been complete in this menu.

Page 180

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5.4

ALLOCATION OF TONES TO LANGUAGES (MENU 5-5-4)


For the Call Manager (F5): Menu 5-3-3 (Allocation of tones to languages). ALLOCATION OF TONES TO LANGUAGES FOR LANGUAGE ........

-------------------------------------------------------Figure 178: Allocation of tones to languages This menu is used to replace the standard tone of a function (0 to 63 and 112 to 127) with a definable tone (64 to 111), for a given language: This assumes that customised announcements can be connected to analogue set interfaces. FOR LANGUAGE ----------FRENCH ENGLISH DEUTSCH

Select a language (defined in menu 5.5.3). The following screen is displayed: ALLOCATION OF TONES TO LANGUAGES FOR LANGUAGE AND TONE IDENTIFIED BY THE NUMBER IS REPLACED BY THE STANDARDIZED TONE NUMBER (64 to 111) --------------------------------------Figure 179: Allocation of tones to languages (continued) AND TONE
INTERNAL ON HOLD TONE PROGRAM WAKE-UP ENTER PASSWORD MINIMUM CREDIT SINGLE CALL NO INTR. EXT. INTERNAL O.S. CALL ACCEPTED TONE WAKE-UP RECALL CONSULT. CALL INTRUS. D.N.D. ACTIV EXTERNAL O.S. CONGESTION TONE MSG IN BOX SINGLE CALL INTRUSION AUTO CALLBACK ACTIV RESTRICTION FAIL UNKNOWN NUMBER TONE ZERO CREDIT CONSULT. CALL NO INTR. PREDEF. CBACK ACTIV

FRENCH RESTRICTION FAIL 25.

...

Select the tone to be modified.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 181

IDENTIFIED BY THE NUMBER A number linked to the tone previously selected is displayed. To select a tone not in the above list and for definable tones (dual criteria company-dept/language), enter the tone number in three digits IS REPLACED BY DEFINABLE TONE (NUMBER 64 TO 111) Enter the number of the definable tome (3 digits) which will replace the tone selected.

5.5.5

COMPANY/DEPARTMENT SPECIFIC TONES (MENU 5-5-4)


For the Call Manager (F5): Menu 5-3-4 (Company/department specific tones). This MMC enables you to replace network tones with definable tones (single-company or multi-company configuration).

5.5.5.1

SINGLE-COMPANY CONFIGURATION SPECIFIC TONE TONE IS REPLACED BY DEFINABLE TONE NUMBER (64 to 111) ... EXTERNAL DIAL TONE

Figure 180: Specific tone (single-company) TONE EXTERNAL DIAL TONE BF ANS: FWD OPCO FREE AP REP AB OCC BF ANS: DAY DISSUA INTERNAL ON HOLD TONE AF ANS: EXT FRE BF DAY RING BF ANS: NIGHT DISSUA NETWORK HOLD AF ANS: opco FREE BF NIGHT RING AF ANS: DAY DISSUA BF ANS: EXT FRE AV REP AB OCC MEET-ME PAGING AF ANS: NIGHT DISSUA

Select the network tone to be allocated to the definable tone. IS REPLACED BY DEFINABLE TONE (NUMBER 64 TO 111) Enter the number of the definable tome (3 digits) which will replace the tone selected.

Page 182

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5.5.2

MULTI-COMPANY CONFIGURATION This menu is used to link a network tone with a definable tone for a company/department pair. COMPANY/DEPARTMENT SPECIFIC TONES COMPANY NAME CMPNY 0

-----------------------------------------------------Figure 181: Company/department specific tones COMPANY NAME Select a company. The following screen is displayed. SPECIFIC TONE CMPNY 0 AND DEPARTMENT TONE IS REPLACED BY DEFINABLE TONE NUMBER (64 to 111) ... DEPT 0 EXTERNAL DIAL TONE

-----------------------------------------------------Figure 182: Company/department specific tones (cont.) AND DEPARTMENT Select a department. TONE EXTERNAL DIAL TONE BF ANS: FWD OPCO FREE AP REP AB OCC BF ANS: DAY DISSUA INTERNAL ON HOLD TONE AF ANS: EXT FRE BF DAY RING BF ANS: NIGHT DISSUA NETWORK HOLD AF ANS: opco FREE BF NIGHT RING AF ANS: DAY DISSUA BF ANS: EXT FRE AV REP AB OCC MEET-ME PAGING AF ANS: NIGHT DISSUA

Select the network tone to be allocated to the definable tone. IS REPLACED BY DEFINABLE TONE (NUMBER 64 TO 111) Enter the number of the definable tome (3 digits) which will replace the tone selected.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 183

5.5.6

DEFINITION OF DIRECT ACCESS MESSAGES (MENU 5-5-6)


For the Call Manager (F5): Menu 5-3-5 (Definition of direct access messages). DEFINITION OF DIRECT ACCESS MESSAGES FOR MESSAGE 0 COMMON TONE No 68. listening time (SEC) FOR MESSAGE 1 COMMON TONE No 111 listening time (SEC) FOR MESSAGE 2 COMMON TONE No ... FOR MESSAGE 3 COMMON TONE No FOR MESSAGE 4 COMMON TONE No FOR MESSAGE 5 COMMON TONE No FOR MESSAGE 6 COMMON TONE No FOR MESSAGE 7 COMMON TONE No ... ... ... ... ...

8.. 8..

-------------------------------------------------Figure 183: Definition of direct access messages This menu is used to set up correspondence between a direct message and a definable tone. Listen to the message by dialling a prefix (see volume 1, Feature class). FOR MESSAGE N DEFINABLE TONE NO. Enter the definable tone number. Note : Several messages can use the same tone. A direct access message can reach an announcement or a tone directly (for example: an internal speaking clock).

LISTENING TIME (SEC) Length of message (in seconds).

Page 184

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.5.7

DISPLAY DEFINABLE TONES (MENU 5-5-7)


For the Call Manager (F5): Menu 5-3-6 (Display definable tones).

5.5.7.1

SINGLE COMPANY OPERATION USE OF DEFINABLE TONES TONE LANG/CMPNY DEPARTMENT Tone REPLACED --------------------------------------------68 ******** ******** HOLD NETWORK 69 ******** ******** BF ANS: EXT free 111 ******** ******** AV REP AB OCC -------------------------------------------------Figure 184: Display of definable tones in single-company configuration This screen is used to display the definable tones of a single company. Note : In single-company configuration, the company name displayed is not significant. Example: Display of the definable tones used by the company-department:


5.5.7.2

tone 068 is reserved for NETWORK HOLD tone 069 is reserved for BF ANS: EXT FREE (pre-response) tone 111 is reserved for BF ANS: EXT BUSY (pre-response)

MULTICOMPANY OPERATION USE OF DEFINABLE TONES Tone LANG/CMPNY DEPARTMENT Tone REPLACED --------------------------------------------68 CMPNY 0 DEPT 0 Hold NETWORK 69 CMPNY 1 SERV0 NETWORK HOLD CMPNY 1 SERV1 NETWORK HOLD 111 CMPNY 0 DEPT 0 BF ANS: EXT free -------------------------------------------------Figure 185: Display of definable tones in multi-company configuration This screen is used to display the definable tones for the departments of more than one company. Example: Display of the definable tones used by COMPANY 0/1, DEPARTMENT 0/1.


and 1

tone 068 is reserved for COMPANY 0 and DEPARTMENT 0 tone 069 is reserved for COMPANY 1 and DEPARTMENTS 0 tone 111 is reserved for COMPANY 0 and DEPARTMENT 0

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 185

5.5.8

EXTENNAL MUSIQUE LEVEL ADJUST. (MENU 5-5-8)


For the Call Manager (F5): this menu is not available. Music-on-hold is specific to the UCT card (F6) (external and internal music) and is adjusted by an electronic potentiometer using this MMC. EXTENNAL MUSIQUE LEVEL ADJUST. PHYSICAL SLOT OF LIST. DEVICE ATTENUATE LEVEL (Db) SOUND LEVEL 16 MIN. .....

----------------------------------------------Figure 186: Adjust external music level (F6) PHYSICAL SLOT OF LIST. DEVICE Enter the set's equipment number (cabinet no. + card slot no. + card equipment no.) from which the music is played (5 digits). ATTENUATE LEVEL (DB) Line read only, appears only on F6. Gives the attenuation level at a given moment. SOUND LEVEL MIN. MAX. MORE LESS

This choice is used to increase the volume of the music. Selecting MORE or LESS increases or decreases the volume by 1 Db. Selecting MIN. and MAX. sets the minimum and maximum volume respectively.

Page 186

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.6

SIGNALLING MANAGEMENT (MENU 5-6)


For the Call Manager (F5): MENU 5-4 SIGNALlING MANAGEMENT 1 2 3 4 5 6 SIGNALING ACTIVATION NON ISDN SIGNALING PARAMETERS ISDN SIGNALING PARAMETERS INITIALIZE A SIGNALING TYPE RECORDING PARAMETERS IP SIGNALING PARAMETERS .

ENTER YOUR CHOICE

---------------------------------------Figure 187: Signalling management (F6) SIGNALlING MANAGEMENT 1 SIGNALING ACTIVATION 2 IP SIGNALING PARAMETERS ENTER YOUR CHOICE .

---------------------------------------Figure 188: Signalling management (F5)

5.6.1

SIGNALLING ACTIVATION (MENU 5.6.1)


For the Call Manager (F5): MENU 5-4-1 This MMC is used to activate only the signalling used for each type of trunk card present in the system. Note : On a Call Manager, only the signalling for VoIP is presented. SIGNALLING ACTIVATION FOR THE PHYSICAL TYPE (fix format below) -------------------------------------------------Figure 189: Signalling activation DIGITAL TRK

FOR THE PHYSICAL TYPE (FIX FORMAT BELOW) DIGITAL TRK Select a trunk type. ANALOG TRK TIE LINE ISDN:T0 ISDN:T2 VOICE OVER IP

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 187

5.6.1.1

SIGNALLING FOR DIGITAL TRK SIGNALLING FOR DIGITAL TRK CODE AB SOCOTEL DID TYPE L0 COLISEE MASTER COLISEE SLAVE S.N.C.F. RENAULT LRN-OUTGOING R2 LRN-INCOMING R2 LRN-WINKSTART LRN-COMBINED R2 LRN-SOCOTEL CE IN IN IN IN IN NO NO NO NO NO NO NO SERVICE SERVICE SERVICE SERVICE SERVICE MISSION MISSION MISSION MISSION MISSION MISSION MISSION

CAPABLE CAPABLE CAPABLE CAPABLE CAPABLE CAPABLE CAPABLE

-------------------------------------------------Figure 190: Signalling for digital TRK Set each signalling type In service or Out of service.

5.6.1.2

SIGNALLING FOR ANALOGUE TRK SIGNALLING FOR ANALOGUE TRK STANDARD OVERDIALLING LRA.CT2 IN SERVICE NO MISSION CAPABLE IN SERVICE

-------------------------------------------------Figure 191: Signalling for analogue TRK Set each signalling type In service or Out of service.

Page 188

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.6.1.3

SIGNALLING FOR TIE-LINE SIGNALLING FOR TL TYPE L0


COLISEE MASTER COLISEE SLAVE S.N.C.F. RENAULT RITTER IMM START WINK START CHGT. STATUS LIB TYPE L0 LIB TYPE L1 LR4A-SDA R2 LR4A-SDA Q2 CHGT. EDF STATUS IN SERVICE IN SERVICE IN SERVICE NO MISSION CAPABLE NO MISSION CAPABLE NO MISSION CAPABLE IN SERVICE NO MISSION CAPABLE NO MISSION CAPABLE MISSION CAPABLE MISSION CAPABLE MISSION CAPABLE MISSION CAPABLE NO MISSION CAPABLE

NO NO NO NO

-------------------------------------------------Figure 192: Signalling for tie-line Set each signalling type In service or Out of service. 5.6.1.4 SIGNALLING FOR ISDN:T0 SIGNALLING FOR ISDN:T0
NUMERIS BRI 1 TR6 T0 BELGIUM T0 SWITZERLAND T0 ETSI T0 ISdn QSIg VN2+ T0 IN SERVICE NO MISSION CAPABLE NO MISSION CAPABLE NO MISSION CAPABLE IN SERVICE IN SERVICE IN SERVICE

-------------------------------------------------Figure 193: Signalling for ISDN:T0 Set each signalling type In service or Out of service. 5.6.1.5 SIGNALLING FOR ISDN:T2 SIGNALLING FOR ISDN:T0 ISDN: T2
ISDN: QSIG 1 TR6 PRI BELGIUM T2 SWITZERLAND T2 ETSI PRI VN2+ T2 IN IN NO NO NO IN IN SERVICE SERVICE MISSION CAPABLE MISSION CAPABLE MISSION CAPABLE SERVICE SERVICE

-------------------------------------------------Figure 194: Signalling for ISDN:T2 Set each signalling type In service or Out of service.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 189

5.6.1.6

SIGNALLING FOR VOICE IP SIGNALLING FOR VOICE IP MOVACS: H.323 SIP IN SERVICE IN SERVICE IN SERVICE

-------------------------------------------------Figure 195: Signalling for voice IP Set each signalling type In service or Out of service.

5.6.2

NON ISDN SIGNALLING PARAMTERS (MENU 5-6-2)


For the Call Manager (F5): this menu is not available. All signalling for connection to the public network, or recommended by the public carrier for connection of PBXs, is specified in standards. However, since carriers may differ from country to country even in the smallest amount, and even if the signalling set-up remains the same, the signalling values require modification (for example, Export). IMPORTANT : Only modify the default values if you are entitled to do so.

NON ISDN SIGNALLING PARAMETERS FOR THE PHYSICAL TYPE (fix format below) DIGITAL TRK FOR THE SIGNALLING CODE AB

---------------------------------------Figure 196: Non ISDN signalling parameters FOR THE PHYSICAL TYPE (FIX FORMAT BELOW) DIGITAL TRK Select a trunk type. Note : DIGITAL TRK is available on a NeXspan L/S PBX using an LT2 card. ANALOG TRK TIE LINE

Page 190

11/2006

AMT/PTD/PBX/0053/2/2/EN

When you validate the screen Non ISDN signalling parameters, the following screen is displayed: DIGITAL TRK PARAMETERS AB CODE ms:UNIT MILLISECOND, sec:UNIT SECOND ---------------------------------------------SEIZURE COLLISION ms 10.. IF EXTERNAL TONE EXPECTED: - WAIT DELAY sec 2. - CONFIRM. PRESENCE DURATION ms 100. - TRANSMIT 1ST DIGIT AFTER sec 1100 OTHERWISE TRANSMIT 1ST DIGIT AFTER sec 2. INTERMEDIATE TONE WAIT TIME sec IN IN IN IN In DTMF: DTMF: DEC.: AUTO. auto. TRANSMIT DIGIT DURATION ms TRANSMIT SILENCE DURATION ms TRANSMIT NEXT DIGIT ms DIALLING: SHORT PAUSE sec DIALLING: LONG PAUSE sec 21 70.. 70.. 900. 0. 0.

-------------------------------------------------Figure 197: Non ISDN signalling parameters (continued) DIGITAL TRK PARAMETERS AB CODE IN OPEN DIALLING: DIGIT DELAY sec SET UP TIME-OUT ms IN CLOSED DIALLING: DIGIT DELAY sec END OF SELECTION DELAY sec ANSWER DELAY min REMOTE ANSWER SIMULATION AFTER sec .. INCOMING: - TONE SENDING DELAY TIME-OUT msec - DIGIT DELAY sec - ANSWER SENDING DELAY TIME-OUT msec ACK OF RELEASE DELAY ms REPEAT RELEA. REQUEST OUTGOING TRK sec REPEAT RELEA. REQUEST BOTHWAY TRK sec WAIT CHARGE UNIT AFTER RELEASE ms 7. 100.. 15 60 0.

150 3. 0.. 800.. 0.. 0.. 2000

-------------------------------------------------Figure 198: Non ISDN signalling parameters (continued)

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 191

DIGITAL TRK PARAMETERS AB CODE WAIT RELEASE AFTER HANG-UP sec 0.. BOTHWAY INCOMING PRIORITY ms OUTGOING TRK INCOMING PRIORITY ms RESPONSE DURING RINGING OFF NO CANCEL TX OF FREQ. DIAL TONE SIGN CANCEL TX OF PULSE DIAL TONE SIGN IN R2: NO REC. REJECT NOT ASSIGNED NO 500.. 500.. NO YES

-------------------------------------------------Figure 199: Non ISDN signalling parameters (end) These screens are used to define most timeouts linked to non ISDN signalling. For each timeout, you are reminded of the unit of measurement: seconds (sec), milliseconds (ms), or minutes (min). SEIZURE COLLISION IF EXTERNAL TONE EXPECTED - WAIT DELAY - CONFIRM. PRESENCE DURATION - TRANSMIT 1ST DIGIT AFTER ELSE TRANSMIT 1ST DIGIT AFTER INTERMEDIATE TONE DELAY IN DTMF: TRANSMIT DIGIT DURATION IN DTMF: TRANSMIT SILENCE DURATION IN DEC.: TRANSMIT NEXT DIGIT IN AUTO. DIALLING: SHORT PAUSE IN AUTO. DIALLING: LONG PAUSE IN OPEN DIALLING: DIGIT DELAY SET UP TIME-OUT IN CLOSED DIALLING: DIGIT DELAY END OF SELECTION DELAY ANSWER DELAY REMOTE ANSWER SIMULATION AFTER INCOMING - TONE SENDING DELAY TIME-OUT - DIGIT DELAY - ANSWER SENDING DELAY TIME-OUT Enter a duration (in sec). Enter a duration (in ms). Enter a duration (in ms). Enter a duration (in sec). Enter a duration (in sec). Enter a duration (in ms). Enter a duration (in ms). Enter a duration (in ms). Enter a duration (in sec). Enter a duration (in sec). Enter a duration (in sec). Enter a duration (in ms). Enter a duration (in sec). Enter a duration (in sec). Enter a duration (in min). Enter a duration (in sec). Enter a duration (in ms).

Enter a duration (in ms). Enter a duration (in sec). Enter a duration (in ms).

Page 192

11/2006

AMT/PTD/PBX/0053/2/2/EN

ACK OF RELEASE DELAY REPEAT RELEA. REQUEST OUTG. TRK REPEAT RELEA. REQUEST BOTHWAY TRK WAIT CHARGE UNIT AFTER RELEASE WAIT RELEASE AFTER HANG-UP BOTHWAY INCOMING PRIORITY OUTGOING TRK INCOMING PRIORITY RESPONSE DURING RINGING OFF CANCEL TX OF FREQ. DIAL TONE SIGN. CANCEL TX OF PULSE DIAL TONE SIGN. IN R2: NO REC. REJECT NOT ASSIGNED

Enter a duration (in ms). Enter a duration (in sec). Enter a duration (in sec). Enter a duration (in ms). Enter a duration (in sec). Enter a duration (in ms). Enter a duration (in ms). NO NO NO NO YES. YES. YES. YES.

5.6.3

ISDN SIGNALLING PARAMETERS (MENU 5.6.3)


For the Call Manager (F5): this menu is not available. All signalling for connection to the public network, or recommended by the public carrier for connection of PBXs, is specified in standards. However, private ISDN signalling requires modification of the signalling characteristics for some special applications. IMPORTANT : Only modify the default values if you are entitled to do so. ISDN SIGNALLING PARAMETERS FOR THE PHYSICAL TYPE (fix format below) for the signalling NUMERIS BRI ISDN:T0

-------------------------------------------------Figure 200: ISDN signalling parameters

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 193

FOR THE PHYSICAL TYPE (FIX FORMAT BELOW) ISDN:T0 ISDN:T2

Select a trunk type. ISDN PARAMETERS:T0 NUMERIS BRI YES 51 YES 10 0. NO CHARGE 0. .. BEFORE YES NO

LEVEL 2 BREAK - WITH HOLD CALL - ALARM REPORTED AFTER - PBX RECOVERY - AFTER ALARM MONITORING NUMBER OF SUCCESSIVE TRANSITS CHARGING DISPLAY MODE - INFORMATION TYPE - IDENTIFIER LENGTH - START IDENTIFIER - SITE USER TO USER INFORMATION (SUU) TRT MESSAGE STATUS

-------------------------------------------------Figure 201: ISDN signalling parameters (continued) ISDN PARAMETERS:T0 NUMERIS BRI

FWD. TO ATDC DISABLED NO TRANSMIT NUM. IN BLOCK NO TIMEOUT T301 RING (sec) 100TEMPO T302 RECEPTION INTER-DIGIT 20 TIMEOUT T303 ANSWER DELAY 10 TIMEOUT T304 TRANSMISSION INTER-DIGIT 60 TIMEOUT T305 ACK OF RELEASE 4. TIMEOUT T308 ACK END OF RELEASE 4. TIMEOUT T309 LEVEL 2 RECOVERY 60. TIMEOUT T310 ESTABLISHMENT 60. TIMEOUT T313 CONNECTION ACCEPTANCE 4. TIMEOUT T316 RESET ACCEPTANCE 120 TIMEOUT T322 STATUS DELAY 5.. REMOTE TONE MONITORING - FLAG PROGRESSION 1 - FLAG PROGRESSION 2 NO NO

-------------------------------------------------Figure 202: ISDN signalling parameters (continued)

Page 194

11/2006

AMT/PTD/PBX/0053/2/2/EN

ISDN PARAMETERS:T0 FLAG PROGRESSION 3 FLAG PROGRESSION 4 FLAG PROGRESSION 5 FLAG PROGRESSION 8

NUMERIS BRI NO NO NO NO

-------------------------------------------------Figure 203: ISDN signalling parameters (continued) LEVEL 2 BREAK WITH HOLD CALL ALARM REPORTED AFTER PBX RECOVERY AFTER ALARM MONITORING NO NO YES. Enter a duration (in sec). YES. Enter a duration (in sec). 2 digits NO YES. 4 CHARACTERS 2 digits 2 CHARACTERS 4 CHARACTERS NO NO YES. YES. Enter a duration (in sec).

NUMBER OF SUCCESSIVE TRANSITS CHARGING DISPLAY MODE INFORMATION TYPE IDENTIFIER LENGTH START IDENTIFIER LOCATED

USER TO USER INFORMATION (SUU) TRT MESSAGE STATUS TIME-OUT T301 TO T322

Note : The default values vary depending on the signalling, and are recorded in a table (they cannot be accessed).

T301 ISDN QSIG ETSI 1TR6 100 180 100 100

T302 20 15 15 20

T303 10 5 4 4

T304 60 20 30 60

T305 4 4 30 30

T308 4 4 4 4

T309 60 90 60 60

T310 60 90 40 80

T313 4 4 4 4

T316 120 120 120 120

T322 5 5 5 5

REMOTE TONE MONITORING FLAG PROGRESSION 1 TO 8 NO YES.

FOR THE SIGNALLING ISDN: T0 Select the line signalling. VN2+_T0 VN2+_T2

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 195

5.6.4

INITIALIZE A SIGNALLING TYPE (MENU 5-6-4)


For the Call Manager (F5): this menu is not available. To define new signalling derived from an existing signalling without modifying it, you can copy the existing signalling and make any modifications required on the copy. This MMC is used to make a copy of the existing signalling and give a name to this new signalling. When you have made the necessary modifications, you can initialise the new signalling and allocate it to the trunk group concerned. IMPORTANT : Only modify this MMC if you are entitled to do so.

INITIALIZE A SIGNALLING TYPE FOR THE PHYSICAL TYPE (fix format below) copy signalling for the signalling which will be called CONFIRMATION TIE LINE TYPE L0 RESVLIA1 RESVLIA1...... NO

-------------------------------------------------Figure 204: Initialise a signalling type FOR THE PHYSICAL TYPE (FIX FORMAT BELOW) DIGITAL TRK Select a trunk type. COPY SIGNALLING Select the outgoing signalling. IN SIGNALLING Select the incoming signalling. WHICH WILL BE CALLED Give a name to the new signalling. ANALOG TRK TIE LINE ISDN:T0 ISDN:T2

Page 196

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.6.5

RECORDING PARAMETERS (MENU 5-6-5)


For the Call Manager (F5): this menu is not available. RECORDING PARAMETERS R2 STANDARD INCOMING, code trans; by pbx Bx - FREE EXTENSION - BUSY EXTENS. - NUMBER NOT ASSIGNED - CONGESTION TONE - remote identification outgoing, code 0 INTERPRETED 1 INTERPRETED 2 INTERPRETED 3 INTERPRETED 4 INTERPRETED 5 INTERPRETED rec. by PBX Bx AS AS AS AS AS AS 6 3 . 4 NO ignored ignored ignored BUSY EXTENS. CONGESTION TONE NUMBER NOT ASSIGNED

------------------------------------------------Figure 205: R2 Standard recorder parameters This menu is used to configure the parameters of a recorder. Note : The only type of recorder that can currently be configured is the R2 type.

INCOMING, CODE TRANS; BY PBX BX FREE EXTENSION Select a number: from 0 to 9 NUMBER NOT ASSIGNED Select a number: from 0 to 9 CONGESTION TONE Select a number: from 0 to 9 REMOTE IDENTIFICATION NO AT END DURING

Select an identification.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 197

RECEIVED DIGITS NUMBER Select a number: from 1 to 20 Note : This field is only displayed if the previous field is set as DURING: this specifies when the identification request will be made. The recorder knows that this request is not made after the number dialled is received.

OUTGOING, CODE REC. BY PBX BX N INTERPRETED AS IGNORE SUBSCR BUSY EXTENS.

NO NOT ASSIGNED CONGESTION TONE Select how you want the n codes to be interpreted. Note : These fields indicate the PBX how to interpret the codes received during an outgoing call.

5.6.6

IP SIGNALING PARAMETERS (MENU 5-6-6)


For the Call Manager (F5): Menu 5-4-2 IP SIGNALING PARAMETERS

BYTES TOS VOICE (hexa) B8 BYTES TOS SIGNALING (hexa) TIME TO LIVE OF THE IP DATAGRAM ---- VOICE ENCRYPTION PARAMETERS ------FUNCTI.STATUS LOCKED UPDATED ON: .............. Ed: ..... ENCRYPTION ALLOWED ENCRYPTION KEYS : - CMEX ................................ - CMSK ............................ --------- MISCELLANEOUS PARAMETERS ----ARP INPUTS NUMBER 50. TIME TO LIVE OF THE ARP INPUT sec 600.. ARP ENTRIES DELETION NO TIME-OUT NETWORK ALARM START sec TIME-OUT NETWORK ALARM END sec 120.. 30...

A0 32.

---------------------------------------Figure 206: IP signalling parameters (F6)

Page 198

11/2006

AMT/PTD/PBX/0053/2/2/EN

IP SIGNALING PARAMETERS BYTES TOS VOICE (hexa) B8 BYTES TOS SIGNALING (hexa) TIME TO LIVE OF THE IP DATAGRAM ---- VOICE ENCRYPTION PARAMETERS ------FUNCTI.STATUS LOCKED UPDATED ON: .............. Ed: ..... ENCRYPTION ALLOWED ENCRYPTION KEYS : - CMEX ................................ - CMSK ............................

A0 32.

---------------------------------------Figure 207: IP signalling parameters (F5) This menu is used to modify the parameters used by the PTx cards linked to IP signalling.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 199

BYTES TOS VOICE (HEXA) Note : TOS (Type Of Service) is intrinsic data within an IP message used to determine the priority of the IP packet containing this value, compared to other IP messages passing through the TCP/IP network. The PBX manages two types of IP message (a marking message for voice, and a signalling message). The PBX assigns a value for the TOS that is specific to the transmitted IP message. The two lines below are used to modify the TOS value used for voice and signaling. Default value in hexadecimal of the TOS bit (IP segment header) used for RTP and RTCP packets. This value can be between 0x20 and 0xFF and is initialised at 0xB8 (low order byte of parameter 0 in the table).

OCTET TOS SIGNALISATION (HEXA) Valeur par dfaut, en hexadcimal, du bit TOS dun datagramme IP, vhiculant un segment TCP de signalisation. Cette valeur peut tre comprise entre 0x20 et 0xFF et est initialise 0xA0 (octet de poids fort du paramtre 0 de la table). TIME TO LIVE DU DATAGRAMME IP Nombre maximum de sauts que peut effectuer un datagramme IP (nombre de routeurs quil peut traverser). Cette valeur peut tre comprise entre 1 et 255 et est initialise 16 (paramtre 15 de la table). For Call Manager (F5): not available.

NOMBRE DENTREES ARP Valeur par dfaut de la taille du cache ARP. Cette valeur peut tre comprise entre 1 et 500 et est initialise 50 (paramtre 5 de la table). For Call Manager (F5): not available

DUREE DE VIE DUNE ENTREE ARP SEC Valeur par dfaut, en secondes, de la dure de vie dune entre du cache ARP. Cette valeur peut tre comprise entre 1 et 65534 secondes et est initialise 600 (10 minutes) (paramtre 4 de la table). For Call Manager (F5): not available

DELETE ARP INPUTS YES/NO Answering YES will delete the ARP inputs of all the cabinet IP cards. For Call Manager (F5): not available

DUREE DE VIE DUNE ENTREE ARP SEC Valeur par dfaut, en secondes, de la dure de vie dune entre du cache ARP. Cette valeur peut tre comprise entre 1 et 65534 secondes et est initialise 600 (10 minutes) (paramtre 4 de la table).

Page 200

11/2006

AMT/PTD/PBX/0053/2/2/EN

For Call Manager (F5): not available

TEMPO DEBUT ALARME RES SEC Valeur de la temporisation mise en uvre avant de conclure une dconnexion ethernet (absence de LINK) qui conduira la mise en faute des liaisons de donnes et des joncteurs VOIP. Cette valeur peut tre comprise entre1 et 65534 secondes et est initialise 120 (2 minutes) (paramtre 7 de la table). TEMPO FIN ALARME RES SEC Valeur de la temporisation mise en uvre avant de conclure la reconnexion ethernet (LINK retrouv) qui conduira la remise en service des liaisons de donnes et des joncteurs VOIP. Cette valeur peut tre comprise entre 1 et 65534 secondes et est initialise 30 (paramtre 8 de la table). VOICE ENCRYPTION PARAMETERS The encryption configuration parameters are defined in the IP SIGNALLING PARAMETERS menu. Encryption is performed using the 128 bits AES protocol. The following conditions must be fulfilled to allow voice encryption on the IP network. The encryption function must be unlocked on the master and slave PBXs. The PTx cards used for encryption must be compatible. The encryption keys (CMEK and CMSK) must be entered on the PBX declared as master; then these keys must be sent to all (slave) PBXs on the multi-site network. In a single-site configuration, the PBX must be declared in master mode. In a multi-site configuration, each PBX must be declared in master or slave mode (the slave mode is configured cannonically).

The operator MUST enter the secret encryption keys. Otherwise, no call will be encrypted. The codes are only entered on the PBX declared as master in the multi-site configuration, then sent (in encrypted form) from the master PBX to all the (slave) PBXs in the multi-site configuration. This transmission is recorded in the logbook. After the codes have been entered, it is no longer possible to reread them. However, the date and edition of the last modification are displayed. It is possible to declare another master PBX after cancelling the previous one; the MMCs do not control these modifications. From the master site, the operator can suspend the encryption on the entire multi-site network or on a site-by-site basis. Basically, all sites can encrypt calls but it is possible on each site to forbid local encryption.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 201

DEFINITION OF PARAMETERS:

FUNCTION STATUS This line is read only. When the encryption function is active, the status In Service is displayed. Otherwise, the reason for the malfunction is specified: Locked Codes not existing PTX not compatible Forbidden by master or locally ED:

UPDATED ON : ..

This line is read only. Date on which the encryption keys were last updated by the operator (dd/mm/yy hh: mn). For each update, the edition is increased by 1. By default, the edition is: . OPERATING/ENCRYPTION MODE

SINGLE-SITE CONFIGURATION In a single-site configuration, the PBX is by default declared in master mode. Encryption parameter: ALLOWED: encryption is allowed on the single-site network. FORBIDDEN: encryption is not allowed on the single-site network.

MULTI-SITE CONFIGURATION In a multi-site configuration, only one master must be declared, information uniqueness is not controlled. By default, the operating mode is set to: Master.

Page 202

11/2006

AMT/PTD/PBX/0053/2/2/EN

MASTER SITE: ..

CLUSTER:

Number and name of the site declared as master Master cluster number

This is a read only line and only appears in multi-site mode.

MASTER ENCRYPTION PARAMETER Encryption=local authorisation The master site allows local encryption and disallows it on other sites. Encryption=general prohibition The master site forbids encryption in the entire multi-site configuration Encryption=general authorisation The master site distributes the code to and allows encryption in the entire multi-site configuration. SLAVE ENCRYPTION PARAMETER Encryption=prohibition The slave site disallows encryption locally. Encryption=authorisation The slave site allows encryption locally.

ENCRYPTION KEYS CMEK (Customer Master Encryption Key): 32 alphanumeric characters (0 to 9, A to F). CMSK (Customer Master Salting Key): 28 alphanumeric characters (0 to 9, A to F). To be validated, both keys must be entered in full (60 characters). The characters remain visible when the keys are all entered; a control is performed regarding the number and syntax of the characters entered. When all the keys are entered, the display is replaced by the following characters: *********** . It then becomes impossible to display the keys clearly. So long as no key has been entered by the operator, the CMEK and CMSK lines are specified with the characters . .

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 203

These lines are visible only on the site declared in master mode. It is allowed to enter the encryption keys when the operating status is Out of service.

OTHER ENCRYPTION FUNCTION PARAMETERS: Unlock voice encryption function Voice encryption resources

UNLOCK VOICE ENCRYPTION FUNCTION The function must be unlocked on each site (on both the master and slave site) using the encryption function (Menu 3.8 Software lock management).

VOICE ENCRYPTION RESOURCES The Voice encryption resource must be declared in Menu 3.7.5.5 MISCELLANEOUS RESOURCES (multi-site configuration).

Page 204

11/2006

AMT/PTD/PBX/0053/2/2/EN

5.7

ALARM CONFIGURATION (MENU 5-7)


For the Call Manager (F5): Menu 5-5 (Alarm configuration). ALARM CONFIGURATION 1 INDIVIDUALIZED CONFIGURATION 2 GLOBAL RESET ENTER YOUR CHOICE . ---------------------------------------Figure 208: Alarm configuration

5.7.1

INDIVIDUALIZED CONFIGURATION (MENU 5-7-1)


For the Call Manager (F5): Menu 5-5-1 (Individualized configuration) ALARM CONFIGURATION: SELECTION DETECTION IN BY SBL GROUP OF ALARM ROUTED TO LOCAL SITE ANAL TRK CARD ........ RECORD

---------------------------------------Figure 209: Configure the alarms: selection This screen is used to fully configure the alarms, identified by their origin SBL group, and by type (alarm number in the SBL group). During installation, the alarms are programmed with a specific number in the SBL group to which they belong (alarm number in the SBL group). DETECTION IN Select a local site or another site. Note : This field only appears in multi-site configuration.

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 205

BY SBL GROUP .. DIG TRK CARD ANAL TRK DEV OPERATION DRY LOOP BUFFER_BLOCK_0 BUFFER_BLOCK_4 SUPPLY DATA CARD DIG TRK DEV FALLBACK ACCESS MONITORING BUFFER_BLOCK_1 CAC SERVER PROCESSOR SUBSCR CARD DATA DEVICE BILLING CPU_STARTUP BUFFER_BLOCK_ 2 ANAL. TRK CARD CONFER CARD SUBSCR.DEV SUBSCR ACTION INTEGRATED BUFFER BUFFER_BLOCK_3

Select an SBL group from the list. OF ALARM Select the alarm to be processed in the selected SBL group. ROUTED TO TICKET TOUCHE PN POSTE SONNE CENTRALISATEUR ADRESSES X25

ADRESSE X25 N 1 Slectionner un support de sortie. TICKET TOUCHE PN POSTE SONNE CENTRALISATEUR ADRESSE X25 N1 ADRESSE X25 N2 ADRESSES X25 SNMP TRAP

ADRESSE X25 N2

Provoque l'mission d'un ticket de service alarme. Provoque l'allumage d'une diode sur un poste numrique. Provoque l'appel d'un poste (ou dviateur). Remonte lalarme vers un site centralisateur (CG ou poste externe). Emet lalarme vers ladresse X25 n1. Emet lalarme vers ladresse X25 n2. Emet lalarme vers les deux adresse X25. Generates an SNMP trap, regardless of alarm ticket output.

For Call Manager (F5): not available R2 RELAY Activates or deactivates the R2 relay when alarm appears/disappears (example: mains supply failure on XD/XL/XS/XS).

For Call Manager (F5): not available Note : The Centralising option is not available in mono-site configuration. You can configure X25 addresses number 1 and number 2 in menu 4-1 (Administration parameters).

Page 206

11/2006

AMT/PTD/PBX/0053/2/2/EN

Press Enter to confirm. The following screen is displayed: <SBL GROUP NAME> ALARM: ALARM: ALARM: ALARM: ALARM: ALARM: ALARM: ALARM: TO <OUTPUT MEDIUM> NOT EQUIP. DOWNLOAD DISABLED IN SERVICE OUT OF SRV FAULTY ERR. MATER LOCKED KEYING KEYING KEYING KEYING KEYING KEYING NOT TRANS. KEYING

----------------------------------------------Figure 210: Alarm configuration ALARM: TYPE (EXCEPT FOR R2 RELAY) IMPOSE NON TRANS. NON URGENT URGENT

For Call Manager (F5): not available ALARM: TYPE (FOR R2 RELAY) ACTIVATION DESACTIVATION. NON TRANS

For Call Manager (F5): not available Slectionner, pour chaque alarme, son traitement.

5.7.2

GLOBAL RESET (MENU 5-7-2)


For the Call Manager (F5): Menu 5-5-2 (Global reset) ALARMS CONFIGURATION RESET DETECTION IN REPORTED TO SET REPORTED TO KEY ROUTED TO RECORD REPORTED TO CENTRAL. REPORT TO X25 ADDRESS RESET CONFIRMATION LOCAL SITE NOT TRANS. NOT TRANS. NOT URGENT NOT URGENT NOT TRANS. YES

---------------------------------------Figure 211: Configure the alarms: global reset This reset menu is used to define default processing for all LSB groups and alarms. DETECTION IN LOCAL SITE ANOTHER SITE

AMT/PTD/PBX/0053/2/2/EN

11/2006

Page 207

Select the local site if the reset is for alarms detected locally, or another site if the reset is for alarms detected in other sites and due to centralisation of the logbook. Note : This field only appears in multi-site configuration.

REPORTED TO SET / KEY / TICKET / CENTRAL. KEYING ADDRESS 1 NOT TRANS. ADDRESS 2 NOT URGENT TO 2 ADDR URGENT

Define for each output the default processing for all LSB groups and alarms. REPORT TO X25 ADDRESS NOT TRANS. ADDRESS 1 ADDRESS 2 TO 2 ADDR

Define for the X.25 Address output the default processing for all LSB groups and alarms. RESET CONFIRMATION YES NO

Select YES to reset and press Enter to confirm.

REPORT TO SNMP TRAP For Call Manager (F5): not available IMPOSE NON TRANS. REPORT TO R2 RELAY For Call Manager (F5): not available ACTIVATION DESACTIVATION.

NON URGENT

URGENT

NON TRANS

Page 208

11/2006

AMT/PTD/PBX/0053/2/2/EN

You might also like