International Product Catalogue

2019

1
 Contents
Introduction Secure Mesh
TM

Technically Superior Products 4 SecurameshTM 36

Help when you need it 5 Securamesh applications
TM
39

Steel Lintels Wall Accessories

6 Wall Connectors 40
Features of Catnic lintels
9 Wall Ties 41
Installation in minutes
Dovetail slots 44
Lintels Head Restraints fixing 45
10
Channel lintels Bed Joint reinforcement 46
11
Internal wall lintels Frame cramps & movement ties 47
12
Internal partition lintels
Lintel brackets
12 Technical Specification
Cavity wall lintels 13 Clauses
Plaster Beads Technical specification clauses 48

How to install Catnic plaster beads 14

Galvanised Beads 16

Galvanised beads with PVC nose 20

Stainless steel beads 21

PVCu Beads
Features of PVCu beads 23
PVCu Beads 24

External Wall Insulation

External wall insulation 26
Duo-base base profiles 31

Metal Lath
Diamond lath 32
Rib lath 33
Coil mesh 33
Mesh Arch formers 34
Mesh Arch former installation 35

2
Build it better
with Catnic
Acknowledged for our excellence of service and conformance to the highest
quality Standards for over 50 years, our products have been installed successfully in
municipal buildings and domestic properties in over 30 countries worldwide.

Building on our strength in the steel lintels market, Catnic supply a comprehensive
range of branded building components, expanded metal and plasterers’ profiles
which are manufactured to the same industry-leading high standard.

Selecting the Catnic brand assures that the products you have chosen are of superior
quality and are fully supported by our extensive distributor network.

If you need details of your local distributor, or if you require any further information
please contact.
International Sales Department

Catnic
Pontypandy Estate,
Caerphilly,
United Kingdom
CF83 3GL
Tel +44 (0) 29 2033 7900
Fax +44 (0) 29 2088 0855
www.catnic.com

3
 Technically Superior Products
Our rigid adherence to quality control and compliance is
your guarantee of technical superiority.

Quality Structural Performance Environment & Sustainability

Catnic are committed to quality control and The structural data published in the loading Catnic has been certified to BES 6001 so you
are a BSI registered company with quality tables included in this technical guide, are can rest assured that you are specifying/using
management systems in accordance with achieved in accordance with the requirements a sustainable product and can maximise the
BS EN ISO 9001: 2008. of BS EN 845-2 : 2013. potential for obtaining credits under the
Responsible Sourcing of Materials sections
Independent Testing of BREEAM, the Code for Sustainable Homes
Extensive testing was undertaken at and CEEQUAL. Certification of all our steel
the following test houses: construction products to BES 6001 provides
BS EN ISO 9001 : 2008 BS EN ISO 14001 : 2004 • The University of Wales, independent verification of our corporate
FM 14913 EMS 555046
School of Engineering responsibility, including the way we drive
sustainability considerations up the supply
Material Specification • The University of South Wales, Commercial chain to the point of raw material extraction.
Catnic’s Standard lintels are manufactured Services Centre for Engineering, Research It delivers a method for us to benchmark and
from high quality grade galvanised steel to and Environmental Applications (CEREA) show that we are continuously improving our
BS EN 10346:2009 DX51D & Z275, with a black
• Ceram Building Technology, Stoke-on-Trent sustainability credentials.
coloured polyester resin finish.

Thermal Performance / Insulation Fire Testing

All Catnic lintels for traditional external cavity Catnic lintels have been independently tested
walls are supplied fully insulated. Insulation inaccordance with the relevant parts of BS 476,
extends continuously along the full length of Methods of Determination of the Fire
the lintel, leaving no potential thermal bridges Resistance of Loadbearing Elements of
and cannot be dislodged. Construction.

Customer Support Fully committed to first class service support, providing the building
industry with new and improved products, borne from investment
in design and manufacturing technologies.
Full service support for customers
Catnic’s team: •  Have comprehensive product and
Catnic has been at the forefront of lintel
industry knowledge
design for over 50 years. Our reputation for
• Are professional and experienced
exceptional quality and technical expertise has • H
 ave a committed parent company
ensured customers satisfaction and loyalty in • Are extensively trained - Tata Steel
the products and services that we offer.

Regulatory authorities approval

Catnic’s excellence is internationally
recognised
91/2638

BS EN 845-2 : 2013 91/2638

KM 07234

Catnic lintels have gained the approval of the regulatory authorities both in the BSI Kitemark BBA Certification
domestic and international markets. Such wide-spread comprehensive approval is Catnic steel lintels have Catnic steel lintels are
an assurance to designers, specifiers and builders of the reliability and state-of-the- been awarded the BSI certified by the British
art quality of the Catnic range. Kitemark license Board of Agrément
number KM07234. under certificate
Catnic lintels are designed, manufactured and tested in accordance with
number 91/2638.
BS EN 845-2:2003

International Product Catalogue Introduction

4
Find your local
supplier, with our
online international
stockist search
catnic.com

5
Features of Catnic Lintels

Features of Catnic Lintels

Catnic lintels offer many benefits to specifiers and
builders through a combination of their design and
corrosion protection. These features ensure that Catnic
lintels are widely used and respected, throughout the
building industry.

Steel

Galvanised Steel

Duplex coating

Plaster key

International Product Catalogue Steel Lintels

6
 Features of Catnic Lintels

Integral Duplex Corrosion

Plaster Key Protection System

Many Catnic lintels come complete Initially, Catnic standard lintels are
with an integral plaster key that avoid manufactured from hot-dipped galvanised
the hazards of working with a mesh steel to BS EN 10346: 2009 plus coating
key. In addition the unique design of type Z275.
the perforated base plates on CG, TS, A coating of thermal setting polyester
CH, TH, CX, TX lintels minimise cold powder is then applied by an electrostatic
bridging without affecting the structural process, further protecting the lintel. High
performance. temperature curing then produces a tough
durable surface highly resistant to impact,
abrasion and damage during rough on-site
handling. This double method of protection
Continuous gives Catnic lintels inherent benefits over
those offered by other manufacturers using
Insulation the more traditional pre- or post-galvanised
steel techniques. The protection system
Many Catnic lintels are supplied with CFC and
complies fully with the chemical and
HCFC free insulation maximising their thermal
physical test requirements outlined in table
efficiency and compliance with Part L.
2 of BS 5977: PART 2: 1983 and table C.1
The insulation is accurately shaped of BS EN 845-2: 2003 for lintels effectively
to optimise the thermal performance having their own built-in DPC.
extending continuously along the
Both of these processes rely on just a
full length of the lintel and cannot be
simple coating of zinc to provide cathodic
dislodged, leaving no potential ‘cold spots’.
protection. The zinc protects the steel, but
is itself liable to rust with aqueous alkaline
solutions leaching from the building fabric
and therefore corrode. The famous black
coating makes Catnic lintels instantly
recognisable and provides an effective
barrier against moisture or chemical attack
BS EN 845-2 : 2013
KM 07234 leached from the mortar and masonry.

7
Our range of products
is growing, view the
full selection online
catnic.com
 Lintel Installation

Installation
in Minutes
Comparison of installation times with a Catnic lintel and
a conventional concrete cast in-situ lintel.

Catnic lintel installation

Total installation time

– 2 minutes
Concrete cast in-situ lintel installation
1 Vertical framework erected and
secured and a horizontal level taken. 2 Commencement of lintel framework. 3 Continuation of framework.

5 Completion of lintel after steel

4 Completion of framework. reinforcement and pouring of concrete. 6 W
 ait for concrete to set.

WAIT!

In the time taken to install just one concrete lintel, Total installation time
– 48 minutes
twenty four Catnic lintels could have The concrete lintel must be left to cure before
been installed. continuing with blockwork installation.

9
Lintels

Channel Lintels
For Solid Walls

Lintel Lintel Gauge Sheet Weight per Safe Working Load uniformly distributed (tonnes)
Dimension type code thickness metre Lengths available (mm) in increments of 100 (mm)
(mm)
L H code (mm) (kg) 900-1200 1300-1500 1600-1800 1900-2100 2200-2400 2500-2700 2800-3000

A 2.0 3.0 0.55 0.42 0.31 - - - -

50 CN100 B 2.5 3.7 0.80 0.58 0.38 0.24 0.18 - -

103
C 3.1 4.7 1.12 0.66 0.44 0.31 0.23 0.16 0.13

75 CN103 C 3.1 5.9 1.63 1.25 1.00 0.86 0.64 0.47 0.38

A 2.0 3.7 0.48 0.37 0.27 - - - -

50 CN150 B 2.5 4.7 0.76 0.58 0.41 0.27 0.19 - -

153
C 3.1 5.9 1.22 0.79 0.52 0.37 0.28 0.19 0.14

75 CN152 C 3.1 7.1 1.63 1.25 1.00 0.86 0.64 0.47 0.38

A 2.0 4.4 0.62 0.48 0.35 - - - -

50 CN200 B 2.5 5.6 0.77 0.59 0.41 0.29 0.21 - -

203
C 3.1 7.1 1.05 0.80 0.53 0.38 0.28 0.19 0.14

75 CN202 C 3.1 8.5 1.63 1.25 1.00 0.86 0.64 0.47 0.37

A 2.0 5.4 0.62 0.48 0.35 - - - -

253 50 CN250 B 2.5 6.7 0.77 0.59 0.41 0.29 ­0.21 - -

C 3.1 8.6 1.05 0.80 0.53 0.38 0.28 0.19 0.14

75 CN252C C 3.1 9.5 1.63 1.25 1.00 0.86 0.64 0.47 0.37

Note: Width dimensions are ‘inside of channel’ dimensions.

International Product Catalogue Lintels

10
 Lintels

Internal Wall Lintels

100mm Interior Solid Walls 140mm Interior Solid  Walls

Standard lengths are available in increments of Standard lengths are available in increments of
150mm at lengths up to 3000mm, 300mm at lengths 150mm at lengths up to 3000mm, 300mm at lengths
from 3000mm to 4800mm (including 4575mm, but from 3000mm – 4800mm (including 4575mm, but
excluding 4500mm). excluding 4500mm).

BSD100 BSD140
Standard Duty

750- 2250- 2850- 3900- 750- 2250- 2850- 3900-

Standard lengths (mm) 4800 Standard lengths (mm) 4800
2100 2700 3600 4575 2100 2700 3600 4575
SWL (kN) 19 20 29 29 27 SWL (kN) 19 20 29 29 27
Weight (kg/m) 6.0 7.5 12.4 15.7 15.7 Weight (kg/m) 6.9 8.7 13.1 16.2 16.2
Nominal height (mm) 143 143 219 219 219 Nominal height (mm) 143 143 219 219 219

BHD100 BHD140
750- 1650- 2250- 2850- 3900- 750- 1650- 2250- 2850- 3900-
Heavy Duty

Standard lengths (mm) Standard lengths (mm)

1500 2100 2700 3600 4800 1500 2100 2700 3600 4800
SWL (kN) 29 39 39 51 51 SWL (kN) 29 39 39 51 51
Weight (kg/m) 7.5 9.4 12.4 15.7 18.8 Weight (kg/m) 8.7 10.9 13.1 16.2 20.5
Nominal height (mm) 143 143 219 219 295 Nominal height (mm) 143 143 219 219 295
Extra Heavy Duty

BXD100 BXD140
Standard lengths (mm) 750-1500 1650-2700 Standard lengths (mm) 750-1500 1650-2700

SWL (kN) 47 59 SWL (kN) 47 59

Weight (kg/m) 9.4 15.7 Weight (kg/m) 10.9 16.2
Nominal height (mm) 143 219 Nominal height (mm) 143 219

11
Lintels

Internal Partition Lintels

75 - 100mm Wide Internal Walls

Wall width Lintel dimension Lintel type/ Gauge Steel thickness Weight Safe Working Load Lengths available
(mm) W (mm) H code code (mm) (kg per metre) (tonnes) (metres)
75 65 25 CN92 - 1.2 1.2 0.7 1.05 & 1.20
100 98 25 CN102 - 1.2 1.8 0.7 1.05 & 1.20

Catnic corrugated lintels CN92 and CN102 are designed for internal These lintels are supplied in plain galvanised steel
partition walls only and are manufactured from galvanised steel to without powder coating.
BS EN 10327:2004-DX51D+Z275.

Note: When using these lintels normal building practice should be observed, in that one course of blockwork (Nominal height 200mm) should be
laid on the lintel and the mortar allowed to harden for at least 24 hours before additional loads are applied.

Lintel Brackets
External Application
Code Reference Suitable for lintels Maximum load tonnes/bracket
SB 02/15P* CN56X, CN66X 0.45 - 0.72 -
SB 02/15P/A1* CN56X, CN66X - 0.72 - 0.72
SB 02/19P* CN71, CN81, CN19/14, CN19/19 0.50 - 0.88 -
SB 02/19P/A1* CN71, CN81, CN19/14, CN19/19 - 0.88 - 0.90 Perforated
SB 02/24P* CN7, CN8 0.50 - 0.88 -
SB 02/24P/A1* CN7, CN8 - 0.88 - 1.04
SB 02/28P* CN11, CN12 0.50 - 0.88 -
SB 02/28P/A1* CN11, CN12 - 0.88 - 1.15
Metal expansion anchors quantity - diameter (mm) 2 No. M8 2 No. M10 4 No. M8 4 No. M10
Unperforated

Internal Application
Code Reference Suitable for lintels Maximum load tonnes/bracket
SB 01 CN5X, CN6X, CN100, CN1022, CN103 0.50 - 0.80 -
SB 01/A1 CN5X, CN6X, CN100, CN1022, CN103 - 0.88 - 0.90
SB 03 CN150, CN152 0.50 - 0.80 -
SB 03/A1 CN150, CN152 - 0.88 - 0.90
SB 08 CN200, CN202 0.50 - 0.77 -
Metal expansion anchors quantity - diameter (mm) 2 No. M8 2 No. M10 4 No. M8 4 No. M10

* Unperforated brackets can be supplied on request, simply delete “P” from code reference.

International Product Catalogue Lintels

 Lintels

Cavity Wall Lintels

Classic Box Lintels

For 200mm Wide Walls

Lintel dimension Lintel type/ Gauge Steel thickness Weight Safe Working Lengths available
L (mm) H code code (mm) (kg per metre) Load (tonnes) (metres)

195 143 CN71 A 2.0 2.0 1.6 9.3 2.0 1.95, 2.25 in 150mm
increments
195 219 CN81 B 2.5 2.5 2.0 15.1 3.0 3.00, 3.30, 3.60
195 219 CN81 C 3.1 3.1 2.0 18.5 3.0 3.90, 4.20

Open Back Lintels

For 90 - 105mm Cavity 100 - 115mm Inner Leaf

CG90/100
750- 1650- 1950- 2250- 2550- 2850- 3000-
Standard lengths (mm) 2400 2700 3000 3600
1500 1800 2100
SWL 1 : 1/3 : 1 (kN) 15 18 20 22 26 26 26
Weight (kg/m) 5.8 7.3 8.0 8.6 9.8 12.3 16.0
Nominal height (mm) 140 140 160 180 220 220 220

For 90 - 105mm Cavity 125 - 140mm Wide Inner Leaf

CG90/125
Standard lengths (mm) 750-1500 1350-1800 1950-2400 2250-2700 2850-3000
SWL 1 : 1/3 : 1 (kN) 12 17 20 26 26
Weight (kg/m) 6.3 7.8 9.0 12.9 16.6
Nominal height (mm) 140 140 180 220 220

13
Plaster Beads

Plaster Beads
Our comprehensive range of Plaster Beads are precision
engineered and simple to use. Fixing by nail or plaster dab is
straightforward and fast, generating arises, edges, corners and
joints that are easy to form and resistant to chipping, cracking
and impact damage.

How to install a Catnic plasterer’s bead

The most appropriate Catnic bead should be
chosen to suit the application, required plaster
depth and the desired finish of the work.
The application and installation of of the same material used for the undercoat
Catnic beads should be in accordance with or corrosion resistant galvanised nails for
BS 5492:1990 Code of Practice for internal galvanised bead and stainless steel nails for
plastering and BS 5262:1991 Code of stainless steel bead.
Practice for external renderings.
Beads may be trimmed to length using
Catnic beads should be fixed at a nominal tinman’s shears across the wings and a
600mm spacing by embedding with dabs fine toothed saw across bead noses.

Block
Use one of the following
methods to fix Catnic angle
beads and plaster stop
beads:
Nails
600mm
a) Using galvanised or stainless steel nails (compatible with bead
apart
material) complying with BS 1202: Part 1, fixed at a maximum of
(max)
Bead 600mm apart. When nailing to a solid background the line of the
bead will follow the line of the background.

Plaster

International Product Catalogue Plaster Beads

 Plaster Beads

Plaster Beads
b) Pressing the bead onto dabs of the same material as the undercoat,
Block dabs should be applied at a maximum of 600mm apart. This
method will even out minor irregularities in the line of the
background, although the line of the bead will tend to generally
follow the line of the background.

c) When beads are used with metal lath backgrounds, galvanised

Plaster dabs or stainless steel tying wire may be used to secure the beads in
600mm apart position. Soft galvanised wire to BS 443 and soft stainless steel wire
(max) complying with BS 1554 should be used to match the bead and
(dabs not lath materials. All wires should be twisted tightly and the ends bent
shown to scale away from the finished face of the coating.
Bead in relation to
bead).

Plaster

Corrosion Protection
In normal circumstances, matured The use of sand or water contaminated with In general, care should be taken to ensure that
plasterwork may be regarded as dry and soluble salts in plastering mixes should be metal accessories are kept dry and distortion is
therefore non-corrosive. Risks of corrosion avoided as should soluble chlorides as they are prevented during storage and handling.
in galvanised accessories only normally likely to increase the risk of metal corrosion. Care should also be taken to prevent
becomes apparent during the initial plaster The presence of sea salts in sand used in mechanical damage to the galvanised coating.
drying out period, which should be kept to a plastering which is in contact with galvanised
minimum, and subsequently during periods accessories will often cause rust staining and Stainless steel products are for use specifically
of heavy condensation. should therefore be avoided. with cement based renders.

All backgrounds should be free of deleterious In external applications and, in conditions Catnic Plaster Beads are manufactured
substances such as mould, oil and grease and where heavy condensation, persistent damp to BS EN 13658 : 2008 - Part 1 & 2.
be adequately prepared to accommodate the or regular exposure to moisture are likely, Galvanised products are manufactured
finished surface, all beading and attendant stainless steel, PVCu or PVCu nosed products with steel in accordance to BS EN 10346:
fixings at the specified depths. should be specified. 2009-DX51D+Z275.

15
Plaster Beads

Galvanised Beads
Angle Beads
Provides true and straight corners which are resistant to chipping and cracking giving
strength and protection against everyday knocks.

B B B

W
W W

Chisel Nose Angle Bead Round Nose Angle Bead Angle Bead
4000 4001 AB 38
lengths: Shrink film Euro packaged, lengths: Shrink film Euro packaged, lengths: 50 lengths/
3.0m 25 lengths/pack 3.0m 25 lengths/pack 3.0m pack
B = 7.5mm W = 34mm B = 7.5mm W = 34mm B = 5mm W = 38mm
12mm Plaster thickness 12mm Plaster thickness 13mm Plaster thickness

B B B

W W W

Supasave Angle Bead Standard Angle Bead Wide Wing Angle Bead
SS STD WW 3.0
lengths: 50 lengths/ lengths: 50 lengths/ lengths: 50 lengths/
2.4m, 2.7m, 3.0m pack 2.4m, 2.7m, 3.0m pack 3.0m pack
B = 5mm wide W = 45mm B = 5mm wide W = 53mm B = 5mm wide W = 65mm
13mm Plaster thickness 12-19mm Plaster thickness 12-19mm Plaster thickness

B B B

W W
W

Square Hole Angle Beads - Small Nose Square Hole Angle Beads - Small Nose Square Hole Angle Beads - Round Nose
4004 4005 4006
lengths: Shrink film Euro packaged, lengths: Shrink film Euro packaged, lengths: Shrink film Euro packaged,
2.5m, 3.0m 25 lengths/pack 2.5m, 3.0m 25 lengths/pack 2.5m, 3.0m 25 lengths/pack

B = 3mm wide W = 30mm B = 4mm wide W = 40mm B = 9.5mm wide W = 30mm

7mm Plaster thickness 10mm Plaster thickness 10mm Plaster thickness

Catnic Plaster Beads are manufactured to BS EN 13658 : 2008 - Part 1 & 2.

Galvanised products are manufactured with steel in accordance to BS EN 10346:
2009-DX51D+Z275.

International Product Catalogue Galvanised Beads

16
 Plaster Beads

Galvanised Beads
Plasterstop Architrave
Provides clean, neat edges at openings or abutments onto Gives a shadow line decorative effect for aesthetic
other wall surfaces or ceiling finishes. purposes and creates a clean division between varying
wall finishes.
P W
W X
B
P

Plasterstop Bead Architrave with Flange

PS10 PS13 PS16 PS19 ARC10/WF/3.0 ARC13/WF/3.0 ARC20/WF/3.0 ARC30/WF/3.0
lengths: 3.0m, lengths: 3.0m, lengths: 3.0m, lengths: 3.0m,
lengths: 3.0m lengths: 3.0m lengths: 3.0m lengths: 3.0m
2.7m, 2.4m 2.7m, 2.4m 2.7m, 2.4m 2.7m, 2.4m
50 lengths/ 50 lengths/ 50 lengths/ 50 lengths/ 25 lengths/ 25 lengths/ 25 lengths/ 25 lengths/
pack pack pack pack pack pack pack pack
W = 58mm W = 55mm W = 60mm W = 57mm W = 37mm W = 37mm W = 37mm W = 37mm
B = 3mm B = 3mm B = 3mm B = 3mm X = 13mm X = 13mm X = 20mm X = 27mm
P = 10mm P = 13mm P = 16mm P = 19mm P = 10mm P = 13mm P = 13mm P = 13mm
10mm Plaster 13mm Plaster 16mm Plaster 19mm Plaster 10mm Plaster 13mm Plaster 13mm Plaster 13mm Plaster
thickness thickness thickness thickness thickness thickness thickness thickness

X
W
W
P

Plasterstop Punched Wing Architrave without Flange

6212 6213 6214 ARC10/WO/3.0 ARC13/WO/3.0
lengths: lengths: lengths: lengths: 3.0m lengths: 3.0m
2.5m, 3.0m 2.5m, 3.0m 2.5m, 3.0m
25 lengths/ 25 lengths/
25 lengths/pack 25 lengths/pack 25 lengths/pack pack pack

W = 53mm width W = 53mm width W = 53mm width W = 37mm W = 37mm

P = 18mm P = 12mm P = 8mm X = 20mm X = 20mm

18mm Plaster 12mm Plaster P = 10mm P = 13mm

8mm Plaster thickness
thickness thickness 10mm Plaster thickness 13mm Plaster thickness

Catnic Plaster Beads are manufactured to BS EN 13658 : 2008 - Part 1 & 2.

Galvanised products are manufactured with steel in accordance to BS EN 10346:
2009-DX51D+Z275.

17
Plaster Beads

Galvanised Beads
Drywall and Thin Coat Plaster Applications
Designed for single/thin coat plasterwork, enabling a thin coat finish of just 3mm.
Micromesh angle beads have fine mesh wings suitable for a single/thin coat of 6mm.

B
B 85º
80º

Drywall Angle Bead Drywall Thin Coat Bead

DW DWTC
2.4m, 3.0m lengths 50 lengths/pack 2.4m, 3.0m lengths 50 lengths/pack
B = 3mm W = 25mm B = 3mm W = 23mm
6mm Plaster thickness 3mm Plaster thickness

B B

W
W

Micromesh Angle Bead Micromesh Angle Bead Wide Wing

MM MMW
2.4m, 3.0m lengths 50 lengths/pack 2.4m, 3.0m lengths 50 lengths/pack
B = 3mm W = 25mm B = 3mm W = 30mm
6mm Plaster thickness 6mm Plaster thickness

P
W B P

Drywall Stop Bead Plasterboard Edging Bead

DWSB3 DWSB6 PBEB 10 PBEB 13 PBEB 15
3.0m lengths 3.0m lengths 3.0m lengths 3.0m lengths 3.0m lengths
50 lengths/pack 50 lengths/pack 50 lengths/pack 50 lengths/pack 50 lengths/pack
W = 30mm W = 30mm W = 25mm W= 25mm W = 25mm
B = 3mm B = 3mm B = 12mm B = 10mm B = 9mm
P = 3mm P = 6mm P = 10mm P = 13mm P = 15mm

3mm Plaster thickness 6mm Plaster thickness 2mm Plaster thickness 2mm Plaster thickness 2mm Plaster thickness

Catnic Plaster Beads are manufactured to BS EN 13658 : 2008 - Part 1 & 2.

Galvanised products are manufactured with steel in accordance to BS EN 10346:
2009-DX51D+Z275.

International Product Catalogue Galvanised Beads

 Plaster Beads

Galvanised Beads
Movement Beads Renderstop Beads
Movement bead allows for movement between adjoining Renderstop beads are used to obtain
surfaces resulting in differential expansion and expansion a neat, bell cast lower edge to external
within the plaster /rendered area. Allows movement of +/- finishes and helps to protect masonry
3mm. Movement Beads should be installed at no greater against run-off water.
than 5m intervals. Movement Beads should not be used
over structural movement /control joints.

W P

Movement Bead Renderstop Bead

MB10 MB13 MB16 MB19 RS3.0
Galvanised with Galvanised with Galvanised with Galvanised with Galvanised finish
PVCu strip PVCu strip PVCu strip PVCu strip 3.0m lengths 50 lengths/pack
3.0m lengths 3.0m lengths 3.0m lengths 3.0m lengths D = 45mm W = 25mm A = 120º
10 lengths/ 10 lengths/ 10 lengths/ 10 lengths/ 19mm Plaster thickness
pack pack pack pack
W = 25mm W = 25mm W = 25mm W = 25mm
P = 12mm P = 15mm P = 18mm P = 21mm
12mm Plaster 15mm Plaster 18mm Plaster 21mm Plaster
thickness thickness thickness thickness

Depth Gauge Beads

Provides a quick and accurate means of ensuring
consistent, minimum plaster depths as plaster is simply
‘ruled off’ to leave the required thickness.

P D

Depth Gauge Bead Renderstop Punched Wing

4100 4101 6215 6217 6219
2.5m, 3.0m 2.5m, 3.0m 2.5m, 3.0m
2.5m, 3.0m lengths 2.5m, 3.0m lengths lengths lengths lengths
25 lengths/ 25 lengths/ 25 lengths/
25 lengths/pack, 25 lengths /pack, 25 lengths/pack, 25 lengths pack pack pack
Shrink film Euro packaged /pack, Shrink film Euro packaged
D = 53mm D = 53mm D = 53mm
W = 21mm W = 23mm W = 13mm W = 9mm W = 18mm
P = 6mm P = 10mm A = 110º A = 110º A = 110º
6mm Plaster 10mm Plaster 13mm Plaster 13mm Plaster 13mm Plaster
thickness thickness thickness thickness thickness

Catnic Plaster Beads are manufactured to BS EN 13658 : 2008 - Part 1 & 2.

Galvanised products are manufactured with steel in accordance to BS EN 10346:
2009-DX51D+Z275.

19
Plaster Beads

Galvanised Beads
with PVC Nose
Angle Beads Plasterstop Beads
Provide true and straight corners which are resistant to Provide clean and straight edges whilst the PVCu nose adds
chipping and cracking giving strength and protection the advantage of a light, non-corrosive elegant solution for
against everyday knocks whilst the PVCu nose adds the an aesthetic finish with an easy to use material.
advantage of a light, non-corrosive elegant solution for an
aesthetic finish.
W
B P

Square Holed Angle Bead Plasterstop Bead

6000 6001 6050 6051 6222 6223 6224
2.5m, 3.0m 2.5m, 3.0m 2.5m, 3.0m 2.5m, 3.0m 2.7m, 3.0m lengths 2.7m, 3.0m lengths 2.7m, 3.0m lengths
lengths lengths lengths lengths
25 lengths/pack Shrink 25 lengths/pack Shrink 25 lengths/pack Shrink
15 lengths/ 15 lengths/ 15 lengths/ 15 lengths/ film Euro packaged film Euro packaged film Euro packaged
pack, Shrink film pack, Shrink film pack, Shrink film pack, Shrink film
Euro packaged Euro packaged Euro packaged Euro packaged W = 53mm W = 53mm W = 53mm
W = 30mm W = 41mm W = 41mm W = 52mm P = 20mm P = 14mm P = 10mm
B = 7mm B = 8mm B = 8.5mm B = 8.5mm 20mm Plaster 14mm Plaster 10mm Plaster
12mm Plaster 19mm Plaster 14mm Plaster 14mm Plaster thickness thickness thickness
thickness thickness thickness thickness

D
W
A

W
Standard Angle Bead
STD/PVC
50 lengths/pack Plasterstop Bead
2.7m, 3.0m lengths
Shrink film Euro packaged
6225 6227 6229
B = 8mm W = 53mm
12-19mm Plaster thickness 2.7m, 3.0m lengths 2.7m, 3.0m lengths 2.7m, 3.0m lengths
25 lengths/pack Shrink 25 lengths/pack Shrink 25 lengths/pack Shrink
film Euro packaged film Euro packaged film Euro packaged
Supersave Angle Bead
D = 53mm D = 53mm D = 53mm
ABPVC13
W = 14mm W = 10mm W = 20mm
50 lengths/pack
2.7m, 3.0m lengths
Shrink film Euro packaged A = 110º A = 110º A = 110º
B = 8mm W = 45mm 14mm Plaster 10mm Plaster 20mm Plaster
10-13mm Plaster thickness thickness thickness thickness

International Product Catalogue Galvanised Beads with PVC Nose

20
 Plaster Beads

Stainless Steel Beads

Angle Beads Plasterstop Beads

Provide true and straight corners which are resistant to Provide clean, neat edges at openings or abutments onto
chipping and cracking giving strength and protection other wall surfaces or ceiling finishes.
against everyday knocks.

B P W

W
B

Standard Angle Bead Plasterstop Bead

STD 3.0/SS PS10/3.0/SS PS13/3.0/SS
3.0m lengths 50 lengths/pack 3.0m lengths 3.0m lengths
B = 5mm W = 53mm 50 lengths/pack 50 lengths/pack
12-19mm Plaster thickness W = 58mm W = 55mm
B = 3mm B = 3mm
Supasave Angle Bead
P = 10mm P = 13mm
SS3.0/SS
10mm Plaster thickness 13mm Plaster thickness
lengths: 2.4m, 2.7m, 3.0m 50 lengths/ pack
B = 5mm wide W = 45mm
PS16/3.0/SS PS19/3.0/SS
13mm Plaster thickness
3.0m lengths 3.0m lengths
50 lengths/pack 50 lengths/pack
W = 60mm W = 57mm
B = 3mm B = 3mm
P = 16mm P = 19mm
B 16mm Plaster thickness 19mm Plaster thickness

Wide Wing Angle Bead

WW 3.0/SS
3.0m lengths 50 lengths/pack
B = 5mm W = 65mm Quality: Manufactured from Stainless Steel to BS EN 10088-2-1.4301. All
12-19mm Plaster thickness beads shown are manufactured in accordance with BS EN 13658: 2005.

21
Plaster Beads

Stainless Steel Beads

Architrave Bead Movement Bead
Provide a shadow line decorative effect for aesthetic Movement bead allows for movement between
purposes and creates a clean division between varying adjoining surfaces resulting in differential expansion
wall finishes eg. at wall and ceiling abutments or door and and expansion within the plaster/rendered area. Allows
window reveals. movement of +/- 3mm. Movement Beads should be
installed at no greater than 5m intervals. Movement
W X Beads should not be used over structural movement
P / control joints.
W P

Architrave with Flange Movement Bead

ARC30/ MB10SS MB13SS MB16SS MB19SS
ARC10/WF/3.0/SS ARC13/WF/3.0/SS ARC20/WF/3.0/SS
WF/3.0/SS 3.0m lengths 3.0m lengths 3.0m lengths 3.0m lengths
3.0m lengths 3.0m lengths 3.0m lengths 3.0m lengths 10 lengths/pack 10 lengths/pack 10 lengths/pack 10 lengths/pack
25 lengths/pack 25 lengths/pack 25 lengths/pack 25 lengths/pack
W = 25mm W = 25mm W = 25mm W = 25mm
W = 37mm W = 37mm W = 37mm W = 37mm
P = 12mm P = 15mm P = 18mm P = 21mm
X = 13mm X = 13mm X = 20mm X = 13mm
12mm Plaster 15mm Plaster 18mm Plaster 21mm Plaster
P = 10mm P = 13mm P = 13mm P = 13mm thickness thickness thickness thickness

Renderstop Bead
Renderstop beads are used to obtain a neat, bell cast
X
lower edge to external finishes and helps to protect
W masonry against run-off water.
P

A
Architrave without Flange
W
ARC10/WO/3.0/SS ARC13/WO/3.0/SS
3.0m lengths 3.0m lengths
25 lengths/pack 25 lengths/pack Renderstop Bead
W = 37mm W = 37mm RS3.0/SS
X = 20mm X = 20mm 3.0m lengths 50 lengths/pack
P = 10mm P = 13mm D = 45mm W = 25mm A = 120º
10mm Plaster thickness 13mm Plaster thickness 19mm Plaster thickness

Catnic Plaster Beads are manufactured to BS EN 13658 : 2008 - Part 1 & 2.

Galvanised products are manufactured with steel in accordance to BS EN 10346:
2009-DX51D+Z275.

International Product Catalogue Stainless Steel Beads

22
 PVCu Beads

PVCu Beads
Catnic PVCu Plaster beads provide all the benefits of traditional
metal beads, but with the added advantages of being a light, rigid,
non-corrosive, easy to use material, offering elegant solutions for an
aesthetic finish and providing a cost-effective way to comply with
the latest regulations.

Features of PVCu Beads

PVCu plaster beads are designed to be used externally, where galvanised
beads are not recommended, and internally in areas where high moisture or
damp exist. They are an economical alternative to stainless steel.

PVCu Beads put a stop to the need for

remedial work on internal applications
Pro-Grip™ Colours
where staining can sometimes be Catnic offer a great range of colours to suit a
found with the use of galvanised beads The range of PVCu Plasterer’s beads variety of plastering and render applications
as a result of prolonged drying out. from Catnic come complete with the giving flexibility for both new build and
Pro-Grip™ innovative adhesion system refurbishment projects.
Material
for a stronger bond. N.B. All colours are matched as closely as
Manufactured from virgin polyvinylchloride
manufacturing and printing techniques allow.
unplasticized (PVCu) which is impact-resistant, Tiny grooves engineered into the face of the
external window grade and UV stable. bead, ribs and undercut perforations increasing Need another colour?
the surface area creating a stronger bond with Simply supply us with a RAL number and
• Eliminates cold-bridging
the plaster or render. The Pro-Grip™ adhesion Catnic can match PVCu Beads to suit any
•W
 ill not deteriorate during the lifetime system prevents slippage often found with
render or plaster colour.*
of the coating traditional PVCu beads, thus increasing the
speed of application. * Terms and conditions
Blanc Ivoire apply. Terre cuite
Excellent Adhesion RAL 9003 RAL 1015 RAL 8203

• Precision engineered perforation pattern

• 0.25mm high ribs at regular intervals
• Pro-Grip™ adhesion system for a stronger bond Blanc Ivoire Terre cuite Gris Marron Noir
RAL 9003 RAL 1015 RAL 8203 RAL 7037 RAL 8014 RAL 9005
High Durability
• Non-corrosive
• Impact resistant
Installation Guide When used in Thermal Insulation Systems,
please observe the system specifications.
Gris Marron
Interior Applications – Plastering Noir
• Withstands most site damage RAL 7037 RAL 8014 RAL 9005 Cutting to length
Secure beads with plaster dabs or stainless
Use fine toothed hacksaw or tin snips. PVC
• Exterior grade UV resistant steel staples every 600mm. When fixing, care
Pipe Weld adhesive can be used for butt joints
should be taken not to distort the beads.
• Unaffected by weathering in conjunction with link pegs where required.
In damp environments use only adhesive
• Resists chemical attack mortar dabs to secure. Storage
Store flat, away from heat and direct sun.
Exterior Applications – Rendering
Ease of use Use only adhesive mortar dabs to secure. Connectivity
• Simple to install Non-stainless mechanical pre-fixings should Beads may be easily butted together using plastic
be removed before rendering. Beads used in a link pegs (available for purchase on request).
• Easy to cut
vertical plane plumb straight and dub out where Regulatory Compliance
• Lightweight and safe handling necessary. Horizontal beads ideally should be set Catnic’s PVCu Beads conform to
• No sharp metal edges to cause injury on a continuous bed of adhesive mortar. BS EN 13914-1: 2005.

23
PVCu Beads

PVCu Beads
Angle Beads PVCu Drip Beads
For use on all plastered and rendered corners where a true, Used above doors, windows and at DPC level offering a
sharp corner is required. Its strong rigid arris protects and profile flush with the rest of the render. The Drip Bead
reinforces plaster where it is most vulnerable. prevents the retention of water that can often bring
staining at the bottom of the render.

W
W 80º
110 -120˚

L T L

PVCu Angle Beads PVCu Drip Beads

PAB10/2.5 PAB12/2.5 PAB15/2.5 PAB19/2.5 PDB08/2.5 PDB10/2.5 PDC16/2.5 PDB19/2.5
6 -10 depth mm 8-12 depth mm 15 depth mm 13-19 depth mm 8 depth mm 10 depth mm 16 depth mm 19 depth mm
50 per box 40 per box 30 per box 30 per box 50 per box 50 per box 50 per box 50 per box
T = 10mm T = 12mm T = 15mm T = 19mm T = 8mm T = 10mm T = 16mm T = 19mm
W = 40mm W = 40mm W = 40mm W = 40mm W = 45mm W = 45mm W = 45mm W = 45mm
L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m
Suitable for Internal and External use Suitable for Internal and External use

PVCu Thin Coat PVCu Twin Nose PVCu Thin Coat

Arch Beads Angle Beads Angle Beads
Readily bends to create curves and A bead suitable for twin-coat render Provides a true, clean corner
arch forms for decorative plaster work. The first nose acts as a gauge for for plasterboard or any smooth
requirements in thin coat and dry- a scratch coat and the second nose acts background. Protects and reinforces
lining applications. as a depth gauge for the finishing coat. plasterboard joints to minimise cracking.

T
W T

W
W
80º 80º
L
L L

PVCu Angle Beads PVCu Twin Nose Angle Beads PVCu Thin Coat Angle Beads
PAR03/2.5 PTN12/2.5 PAB03/2.5
3 depth mm W = 24mm 8 -12 depth mm W = 26mm 3 depth mm W = 24mm
50 per box L = 2.5m 30 per box L = 2.5m 50 per box L = 2.5m
T = 3mm T = 12mm T = 3mm
Suitable for Internal and External use Suitable for Internal and External use Suitable for Internal and External use

International Product Catalogue PVCu Beads

24
 PVCu Beads

PVCu Beads
PVCu Bell Cast PVCu Architrave T
W

Bead (Render Stop Bead) bead with flange

Designed to deliver a gentle
gradient at the base of the Gives a shadow line decorative
render, it is used above doors, effect for aesthetic purposes
W and creates a clean division
windows and at DPC level to
allow rainwater to drain clear of 120˚ between varying wall finishes.
L
the underlying substrate.
T L

PVCu Cast Bell Beads PVCu Architrave bead with flange

PBC10/2.5 PBC15/2.5 PBC20/2.5 PAT1325/3.0/WH
6 -13 depth mm 10-16 depth mm 12 - 22 depth mm 13 depth mm
50 per box 50 per box 50 per box 50 per box
T = 14mm T = 20mm T = 25mm T = 25mm
W = 45mm W = 45mm W = 45mm W = 25mm
L = 2.5m L = 2.5m L = 2.5m L = 2.5m, 3.0m
Suitable for Internal and External use Suitable for Internal and External use

PVCu Movement Beads W

Used where the underlying substrate changes, or where minor movement in the structure beneath
the render is expected. Movement beads can also be used where changes in render colour are T
specified. Movement beads should NOT be used over structural movement joints.

PVCu Movement Beads

PMBS06/2.5 PMBS08/2.5 PMBS10/2.5 PMBS15/2.5 PMBS20/2.5
6 depth mm 8 depth mm 10 depth mm 15 depth mm 20 depth mm
25 per box 25 per box 25 per box 25 per box 25 per box L
T = 6mm T = 8mm T = 10mm T = 15mm T = 20mm
W = 60mm W = 60mm W = 60mm W = 60mm W = 60mm
L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m
Suitable for Internal and External use

PVCu Plasterstop Beads

Used on door and window openings also at base of wall and ceiling level. Designed to deliver T W
a clean edge, they protect and finish plaster and render edges.

PVCu Plaster Stop Beads

PPS03/2.5 PPS06/2.5 PPS08/2.5 PPS10/2.5 PPS15/2.5 PPS20/2.5 PWW15/2.5
3 - 4 depth mm 6 - 8 depth mm 8 -10 depth mm 10 -12 depth mm 15 -17 depth mm 20 -22 depth mm 15 depth mm
50 per box 50 per box 50 per box 50 per box 50 per box 50 per box 50 per box L
T = 3mm T = 6mm T = 8mm T = 10mm T = 15mm T = 20mm T = 15mm
W = 27mm W = 45mm W = 45mm W = 45mm W = 45mm W = 45mm W = 58mm
L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m L = 2.5m
Suitable for Internal and External use

25
External Wall Insulation

External Wall Insulation

(ewi)
External Wall Insulation (EWI) is an insulated layer applied to the
exterior wall of a building and covered with a render coat. An EWI
system can significantly improve the thermal performance of a
building by reducing the rate at which heat is lost through the walls.

In addition this system can dramatically Catnic supplies a range of base track and bead In 2013 Catnic became an associated
transform the buildings exterior with a wide components designed for EWI systems. Our member of the Insulated Render and
range of contemporary or traditional finishes EWI product range is manufactured to the Cladding Association (INCA).
using different textures, colours or finished same industry-leading high standards as our
effects. The result is a comfortable living renowned steel lintels.
environment with reduced heating costs for
the occupants and an increase in property
value with extended lifespan.

International Product Catalogue ExteÅrnal Wall Insulation

26
 External Wall Insulation

External Wall Insulation

Base Track
The aluminium channel provides a simple means
of locating and levelling the bottom run of
insulation boards.
The channels are available in different sizes to suit a range of
different insulation thickness.

Base Track
To suit insulation Overal Width Gauge
Product Code Length (m) Lengths/pack thickness (mm) (mm)* (mm)
8145 2.5 10 50 53 0.8
8148 2.5 10 80 83 0.8
8150 2.5 10 100 103 0.8
8152 2.5 10 120 123 1.0
8154 2.5 10 140 143 1.0

*Other sizes are available to order

Base Track Clip with Mesh

The PVC mesh clip is designed to fix onto the Base
Track, providing a drip edge to protect against
water ingress and ensure a professional finish.

Base Track Clip with Mesh

Product Code Length (m) Lengths/pack Render Depth (mm) Material
8007 2.5 25 7 PVC with mesh

27
External Wall Insulation

External Wall Insulation

Mesh Corner Bead

For use on all rendered corners where a true, sharp corner
is required.
The corner bead protects and reinforces the corners of the insulation
boards, while the mesh ensures there are no cracks in the render.

Mesh Corner Bead

Product Code Length (m) Lengths/pack Mesh Overlap (mm) Material
8409 2.5 100 60 x 90 PVC with mesh
8410 2.5 100 80 x 120 PVC with mesh
8415 2.5 100 100 x 150 PVC with mesh
8423 2.5 50 100 x 230 PVC with mesh

Drip Bead with Mesh

To be fixed onto horizontal edges, such as door and
window heads, to prevent the retention of water that
can often bring staining at the bottom of the render.
It includes bevelled and grooved edges for better plaster adhesion.

Drip Bead with Mesh

Product Code Length (m) Lengths/pack Mesh Overlap (mm) Material
8407 2.5 25 100 x 100 PVC with mesh

International Product Catalogue External Wall Insulation

28
 External Wall Insulation

External Wall Insulation

Stop Bead with Mesh

Finishing sections for rendering with a fibre mesh strip
to reinforce edges of the thermal insulation system.
Designed to deliver a clean, neat edge, they protect and finish plaster
and render edges.

Stop Bead with Mesh

Product Code Length (m) Lengths/pack Plaster Depth (mm) Material
8403 2 25 3-4 PVC with mesh
8406 2 25 6-8 PVC with mesh

Window Frame Seal without Mesh

Used as a stop bead to give a clean, simple detail where
the rendered reveal meets the window frame.
The bead incorporates a compressible foam tape to allow it to seal against
the window frame. It also has an adhesive strip to temporarily fix a protective
sheet over the window while rendering. When rendering is completed this
section of the profile with the adhesive strip is simply removed.

Window Frame Seal without Mesh

Product Code Length (m) Lengths/pack Plaster Depth (mm) Material
3040M 2.4 60 6 PVC
3140L0 1.4 / 2.4 / 2.6 60 9 PVC

29
External Wall Insulation

External Wall Insulation

Window Frame Seal with Mesh

Used as a stop bead, where the reveal meets the window
frame, it gives a clean, simple detail while the mesh
reinforces the detail, ensuring a good adhesion to the
insulation layer.
The bead with 120mm mesh incorporates a compressible foam tape to
allow it to seal against the window frame. It also has an adhesive strip
to temporarily fix a protective sheet over the window while rendering.
When rendering is completed this section of the profile, with the
adhesive strip, is simply removed.

Window Frame Seal with Mesh

Product Code Length (m) Lengths/pack Plaster Depth (mm) Material
3040GL 2.5 60 6 PVC with mesh
3140GL 1.4 / 2.4 60 9 PVC with mesh

Fibreglass
Mesh
Fibreglass mesh provides a layer of reinforcement between
the insulation and final topcoat or finish.

Product features include:

• Full Heat Protection Mesh • Alcohol and Water Resistant
• Displacement Resistant • Chemically Finished
• Alkaline Resistant

Fibreglass Mesh
Fibremesh Rolls
Code FM165 Colour White Mesh Size (mm) 4 x 4mm
Description Fibreglass Mesh Roll Width (mm) 1000mm Weight 165g/m2
Application Render reinforcement Length (m) 50m Quanity Each

International Product Catalogue External Wall Insulation

30
 External Wall Insulation

External Wall Insulation

Duo-Base Base Profiles

The variable base system for 100–260 mm of insulation thickness

DuoBase base profile DuoBase outer corner

8180 – 200 cm 8190 – 100 cm
Two-part PVC 5 PVC corners (5 right corners and 5 left corners)
Length in cm: 200 Length in cm: 100
PU = 10 bars/bundle PU = 5 bars/bundle
Insulation thickness 100–160 mm Insulation thickness 100–160 mm

DuoBase 100 - 160 mm WP: 100 mm / FP: 100 mm

DuoBase 100–160 mm WP: 100 mm / FP: 100 mm

100 mm 120 mm 140 mm 160 mm

DuoBase DuoBase base profile DuoBase outer

WP:corner
100 mm / FP: 160 mm
DuoBase160 100
- 220- 160
mmmm WP: 100 mm / FP: 100 mm
8181 – 200 cm 8191 – 100 cm
Two-part PVC 5 PVC corners (5 right corners and 5 left corners)
Length in cm: 200 Length in cm: 100
160 mm
100 mm 180 mm 120 mm 200 mm 140 mm 220 mm 160 mm
PU = 10 bars/bundle PU = 5 bars/bundle
Insulation thickness 160–220 mm Insulation thickness 160–220 mm

DuoBase
DuoBase 160–220 160mm
- 220 mm WP: 100 mm / FP: 160 mm WP: 100 mm / FP: 160 mm
montagefertige Außenecken

Zehn Frontprofile sind paarweise auf Gehrung (45°) zugeschnitten.

Zur Montage werden
DuoBasedie100
Frontprofile
- 160 mm in das montierte Wandprofil gesteckt. WP: 100 mm / FP: 100 mm
100 cm

Das Wandprofil muss dazu nicht auf Gehrung geschnitten sein.

160 mm 180 mm 200 mm 220 mm
Kantenlänge: 100 cm
Verpackungseinheit: 5 Außenecken (5 linke und 5 rechte Profile)
100 mm 120 mm 140 mm 160 mm
Darstellungen nicht maßstabsgetreu
Properties Image/diagram
montagefertige Außenecken
Material (plastic) Rigid PVC, white, UV-stabilised, impact-resistant Wall profile (WP) Front profile (FP)
DuoBase 160 - 220 mm WP: 100 mm / FP: 160 mm
MaterialZehn Frontprofile
(fibre) ETICSsind paarweise
fibre, auf Gehrung
alkali-resistant, (45°) 165
approx. zugeschnitten.
g/m2
Zur Montage werden die Frontprofile in das montierte Wandprofil gesteckt.
Fibre is moulded
dazu nichtin the PVC profile through
100 cm

MaterialDas Wandprofil
bond muss auf Gehrung geschnitten
material and form-fitting co-extrusion
sein.

Holes Kantenlänge:
Round
160 mm and oval
100 cm 180 mm 200 mm 220 mm
Verpackungseinheit: 5 Außenecken (5 linke und 5 rechte Profile)
Profile connector Not required due to overlapping front
profile attached Darstellungen nicht maßstabsgetreu

Outer corners ready for assembly

montagefertige Außenecken

Ten front profilesZehn

are cut mitred in pairs (45°).
Frontprofile sind paarweise auf Gehrung (45°) zugeschnitten.
Images are not
For installation, the
Zurfront profiles
Montage werdenare dieinserted ininthe
Frontprofile dasinstalled wall profile.
montierte Wandprofil gesteckt. to scale
The wall profile does not havemuss
to be mitre
nichtcut
auf for this. geschnitten sein.
100 cm

Das Wandprofil dazu Gehrung

Edge lengths: Kantenlänge:

100 cm 100 cm
Packaging unit: Verpackungseinheit: 5 Außenecken
5 outer corners (5 left and (5 linke und 5 rechte Profile)
5 right profiles)
Darstellungen nicht maßstabsgetreu

31
Expanded Metal Lath

Expanded Metal Lath

Catnic metal lath is easy to fix and provides a secure key for many
plaster and render applications including joint and crack reinforcement
and refurbishment work. Available in Rib form as a plaster backing on
ceilings, walls and stud partitions or Diamond form that can be used as
part of a fire protection system for structural steel work.

Diamond Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is
especially useful at joints of dissimilar materials. Generally DL111 or DL089 lath is used for wall situations and
DL161 is used for ceiling work.

Sheet Lath
Weight
Reference S W Mesh (mm) Material Sheet size (cm)
(kg/m2)
DL089 9 0.9 Galvanised Steel 250 x 70
DL111 9 1.11 Galvanised Steel 250 x 70
DL161 9 1.61 Galvanised Steel 250 x 70
DL111S 9 1.11 Stainless Steel 250 x 70

Strip Lath
Weight
Reference Width (cm) Material Length (cm)
(kg/m2)
SL021/100/2.5 1.11 10 Galvanised Steel 250
SL021/150/2.5 1.11 15 Galvanised Steel 250
SL023/100/2.5 1.61 10 Galvanised Steel 250
SL023/150/2.5 1.61 15 Galvanised Steel 250

Coil Lath
Weight Coil length
Reference Width (cm) Material (metres)
(kg/m2)
CL021/100/100 1.11 10 Galvanised Steel 100 - 50
CL021/150/100 1.11 15 Galvanised Steel 100 - 50
CL021/200/100 1.11 20 Galvanised Steel 100 - 50
CL023/100/100 1.61 10 Galvanised Steel 100 - 50
CL023/150/100 1.61 15 Galvanised Steel 100 - 50
CL023/200/100 1.61 20 Galvanised Steel 100 - 50

Quality: Manufactured from galvanised steel to BS EN 10346: 2009 – DX51D+Z275 or Stainless Steel to BS EN 10088-2-1.4301. All products shown
are manufactured in accordance with BS EN 13658: 2005. Metal Lath - Definitions, Requirements, Test Methods. Part 1 for Internal Plastering.
Part 2 for External Plastering.

International Product Catalogue Metal Lath

32
 Expanded Metal Lath

Expanded Metal Lath

Rib Lath
Extensively used as a plaster background for ceilings, walls and partitions. Generally
Rib 148 is suitable for wall situations. For ceiling work 184/222 should be used.

Sheet Lath
Weight
Reference Material Size (cm) Rib Height (mm)
(kg/m2)
RIB148 1.48 Galvanised Steel 250 x 60 10
RIB184 1.84 Galvanised Steel 250 x 60 10
RIB222 2.22 Galvanised Steel 250 x 60 10
RIB148 S 1.48 Stainless Steel 250 x 60 10
RIB184 S 1.84 Stainless Steel 250 x 60 10

Refurbishment of Masonry Lath should be fixed with apexes of ribs Stainless steel fixings should be used at
Stainless steel rib lath is ideal for refurbishing against the wall, edge ribs of the sheets sufficient intervals to hold the lath firmly in
damaged or aged masonry walls, when nesting into each other should be wire-tied position.
a key for rendering is not certain due to every 15cm and ends of sheets should be
disintegration or softening of the wall face. lapped not less than 2.5cm and nesting ribs
securely tied together.

Quality: Catnic expanded rib lath is manufactured in accordance with BS EN 13658: 2005. Metal Lath - Definitions, Requirements, Test Methods. Part 1
for Internal Plastering. Part 2 for External Plastering. The galvanised steel used in the manufacture of rib lath is in accordance with BS EN 10346: 2009 –
DX51D+Z275. Where stainless steel is used it is in accordance with BS EN 10088-2-1.4301.

Coil Mesh for Blockwork

Coil Mesh - Galvanised & Stainless Steel
Anti-crack reinforcement for non-structural use.

Coil Mesh
Coil length
Reference Wall width (mm) Coil width (mm)
(metres)
CM 50 100 50 50 or 20
CM 64 114 64 50 or 20
CM 100 150 100 100, 50, 20
CM 114 164 114 100, 50, 20
CM 150 200 150 100, 50, 20
CM 178 228 178 100, 50, 20
CM 200 250 200 100, 50, 20
CM 229 279 229 100, 50, 20
CM 305 355 305 100, 50, 20

Coil Mesh for Non Structural Usage

Expanded metal type bed joint reinforcement is supplied as an anti-crack
reinforcement in the design and construction of brick and block masonry.
It is generally provided at areas of high stress The cracking of masonry due to changes in BS EN 1996 1-1
concentration to dissipate these stresses to temperature, changes in moisture content and PD 6697
areas of low stress. A typical example would be settlement of foundations can all be controlled
at a point where the section of wall changes, by the use of block reinforcement.
such as at a door or window opening.

33
Expanded Metal Lath

Mesh Arch Formers

Mesh Arch Formers
The easy way to create attractive and perfectly finished arches.

For walls of up to 160mm thick, the frame

sections are designed to be overlapped. For
walls 160-300mm thick, standard infill soffit
pieces are provided to bridge the gap between
the sections.

If the thickness of the wall is between 300-

565mm, an Extra Soffit piece is available. Each
arch is supplied with installation instructions
and a complete fixing kit. Soffit pieces are also
included for walls up to 300mm thick.

Verona
65mm

Rise

60mm Brick to brick dimension

Verona with bridging sections Extra soffit section

600mm
65mm

295 x 1200mm
140mm

Extra soffit
section

International Product Catalogue Metal Arch Formers

34
 Expanded Metal Lath

Mesh Arch Formers

Verona Metal Arch Formers
Part code Brick to brick dimension (mm) Rise (mm)
VE 0750 750 375
VE 0800 800 400
VE 0850 850 425
VE 0900 900 450
VE 1200 1200 600
VE 1500 1500 750

Bridging Section Extra Soffit Section

Part code Length Part code Size Wall thickness
BS 0610 600mm ES 0295 295 x 1200mm 300 - 565mm

Installation

1 M
 easure the distance 2 Position the first section 3 F ix the other sections in the 4 T he arch is completed by
between the walls (brick of the arch to the wall and same way, aligning them at plastering directly onto the
to brick) and select the fix with the masonry nails the centre with the plastic steel mesh, using a suitable
appropriate arch size. provided. joining pieces provided. material.
If renovating, remove All arches and soffit pieces
existing plaster down to the should be joined with the self
masonry. Mark the centre of tapping screws provided.
the aperture.

Quality: The galvanised steel used in the manufacture of mesh arch formers is in accordance with BS EN 10346: 2009 – DX51D+Z275.

35
SecuraMeshTM

SecuraMesh
TM

Expanded metal security mesh.

These sheets of expanded steel mesh fit neatly into internal and external
walls, ceilings and roofs to defend premises against forced entry. Resistant
to bolt and hand cutters, SecuraMeshTM is the extra layer of security it pays
to put in place.

The benefits of SecuraMeshTM Important note on installation

• Manufactured in • Concealed, robust protection from break-ins To achieve the additional protection offered by
the UK • Diamond mesh profile is too small for bolt
SecuraMesh™ installers must strictly adhere to
the installation guidelines.
cutters and too strong for hand cutters
• Available in medium
• Manufactured from one sheet so strands
and heavy duty don’t unravel during installation
gauges • Can be installed during or after initial
construction
• Options to suit both
dry-lined and render • Available in mild steel as standard or
galvanised mild steel for additional corrosion
finish applications protection

International Product Catalogue Securamesh™

36
 SecuraMeshTM

SecuraMesh
TM

Material Specification Storage Handling Precautions

All SecuraMesh™ products are manufactured Unless required for immediate use on site, all Gloves should be worn to avoid injury from
from mild steel, following specification and SecuraMesh™ products should be stored in any sharp edges. In the event of a cut, the
tolerances set out in BS405 (1987). a clean and dry environment and should be injury is to be treated by a trained first-aider.
protected form moisture during shipment.
Where galvanised products are required they When lifting or carrying, consideration must
are post galvanised to BS EN 1461: 1999 SecuraMesh™ should be stored on pallets be given to the size and weight of the product.
or suitable racking where practicable. Do not Caution should be exercised when mechanical
Catnic operate a continuous development leave items projecting that could cause injury handling, ensuring the load is evenly balanced
programme and we reserve the right to amend and avoid storage in high traffic areas where and the straps or slings secure.
specification without prior notification. risk of damage is increased.

Uses Disposal COSHH

All SecuraMesh™ products should be used in Do not use damaged goods. Packaging to We are not aware of any risk to the person,
accordance with the Company’s be removed with care and disposed of in a arising from chemicals or any other substances
recommendations and comply with the details safe manner. When disposing of any Catnic present on or in our products. All COSHH
shown on the architects’/engineers’ drawings. products or packaging, due consideration related queries should be directed to our
Specifiers must ensure that the resulting finish must be given to the environmental impact of Technical Services Department on
will be suitable for the intended application. the method of disposal. +44 (0) 29 2033 7900.
For design and specification information
please refer to the British Standards listed
in this brochure and to the manufacturers’
literature.

37
SecuraMeshTM

SecuraMesh
TM

SMMD - Medium Duty Security Mesh

A medium-duty security mesh suitable for internal wall security, partitions, ceilings and roofs.

SMMD
Product Code SMMD01 SMMD02
Description 1.2mm thick flattened mesh 1.2mm thick flattened mesh
Mesh Aperture LWD (mm) 43.3 43.3
Mesh Aperture SWD (mm) 18.0 18.0
Strand width (mm) 2.3 2.3
Strand thickness (mm) 1.1 1.1
Weight (kg/m )2
1.85 1.89
Sheet Size (mm) 2440 x 1220 2440 x 1220
Material Mild Steel Galvanised Steel

SMHD - Heavy Duty Security Mesh

A heavy-duty security mesh suitable for internal wall security, partitions, ceilings and roofs.

SMHD
Product Code SMHD01 SMHD02
Description 3.0mm thick flattened mesh 3.0mm thick flattened mesh
Mesh Aperture LWD (mm) 42.9 42.9
Mesh Aperture SWD (mm) 14.2 14.2
Strand width (mm) 4.6 4.6
Strand thickness (mm) 2.7 2.7
Weight (kg/m2) 8.59 8.81
Sheet Size (mm) 2440 x 1220 2440 x 1220
Material Mild Steel Galvanised Steel

SMHR - Heavy Duty Raised Security Mesh

A heavy-duty raised security mesh suitable for internal or external brickwork and acts as keys for
render or plaster finishes when galvanised.

SMHR
Product Code SMHR01 SMHR02
3.0mm thick mesh with 3.0mm thick mesh with
Description
raised finish raised finish
Mesh Aperture LWD (mm) 50.8 50.8
Mesh Aperture SWD (mm) 22.6 22.6
Strand width (mm) 3.1 3.1
Strand thickness (mm) 3.0 3.0
Weight (kg/m )2
6.52 6.69
Sheet Size (mm) 2440 x 1220 2440 x 1220
Material Mild Steel Galvanised Steel

International Product Catalogue Securamesh™

38
 SecuraMeshTM

SecuraMesh
TM

Applications
Popular applications
Retail Commercial & Industrial Arts Public Service
Retail outlets Record storage rooms Museums Secure units
Cashier kiosks Computer server rooms Art galleries Airport security
Pharmaceutical stores Control rooms Libraries Hospitals

Roofs Ceilings Masonry

Recommended: SMMD Recommended: SMMD or SMHD Recommended: SMHR

Fixings: Fixed to stud with 30-38mm Fixings: Fixed to stud with 30-38mm Fixings: Suitable for both render and
galvanised staples, 30-38mm galvanised galvanised staples, 30-38mm galvanised plaster finishes. SMHR SecuraMesh™ fixed
screw-nails, or 65mm x 3.35mm bright screw-nails, or 65mm x 3.35mm bright with either suitable shot fired fixing, or
annular nails (to BS1202) and min 25mm annular nails (to BS1202) and min 25mm plug and M6 x 50mm screw and plug,
dia x 1.5mm galvanised washers fixed at dia x 1.5mm galvanised washers fixed at complete with minimum 25mm dia x
maximum 450mm centres. maximum 450mm centres. 1.5mm galvanised washers at maximum
450mm centres.

Timber Stud Walls Metal Stud Walls

Recommended: SMMD or SMHD Recommended: SMMD or SMHD

Fixings: Fixed to stud with 30-38mm Fixings: Fixed to metalwork with No 6

galvanised staples, 30-38mm galvanised or 8 x 30 zinc plated self tapping screws,
screw-nails, or 65mm x 3.35mm bright complete with 25mm dia x1.5mm
annular nails (to BS1202) and min 25mm galvanised washers fixed at maximum
dia x 1.5mm galvanised washers fixed at 450mm centres.
maximum 450mm centres.

39
Wall Accessories

Wall Accessories
Catnic Wall Connectors are a simple yet effective system
for tying new masonry walls to existing walls.

Wall Connectors
Catnic wall connectors are suitable for wall thicknesses from 60mm up to
250mm and one pack contains all of the required fixings for a single wall of
2.4m high. This product is available with a choice of two different materials.

Stronghold Wall Connectors Galvanised Wall Connectors

SWC GWC
Stainless Steel to BS EN 10088-2 Galvanised Steel to BS EN 10327: 2004-DX51D+Z275
20 packs per carton 20 packs per carton

International Product Catalogue Wall Accessories

40
 Wall Accessories

Wall Ties
Cavity wall ties provide stability to masonry walls and care
should be taken during installation to avoid the ingress of
water to the inner skin and potential failure. Wall ties should
be installed in accordance to guidance given in BSI PD 6697.
(formerly BS5628 Code of Practice for use of masonry)

• Wall Tie embedment should be at least 50mm • Density should not be less than 2.5 ties per
in both leaves square metre with density increased vertically
around openings (900mm Horizontally,
• Wall Tie should be bedded into mortar and
450mm Vertically) Cavity Wall Ties are
not placed onto dry masonry with mortar
classified in to four types as detailed in
applied around the wall tie
Table 10 of BSI PD 6697 : 2010

Classification of wall tie by end use (as BSI PD 6697 : 2010)

Classification Type of Structure Geographical Location

Type 1 Suitable for most masonry cavity and cladding walls Suitable for most sites.
(Masonry: Heavy Duty) and most building sizes and types. Not very flexible and
should not be specified where large adjustments are However, for relatively tall buildings in the north
likely to be needed during construction, where large western fringes of the UK - particularly on coastal
differential movements are expected to take place sites - and for buildings of unusual shapes, the
between the leaves, or where very low strength/density necessary tie provision should be calculated.
masonry units are in use.

Type 2 Suitable for domestic dwellings and small commercial Suitable for buildings on flat sites where the
(Masonry: General purpose) buildings of a height of up to 15m above ground level, fundamental basic wind speed velocity is up to 31
made with box-form masonry walls comprising two m/s except areas where the site is at an altitude of
leaves of brickwork of similar thickness in the range 150m or more above sea level. May be adequate for
90mm to 150mm. May be suitable for cavity walls having higher altitudes and sloping sites exceeding a slope
leaves of disparate thickness or stiffness or for cladding of 1 in 20 if calculated.
walls (having none or limited horizontal spanning
capability) and for building exceeding 15m, but only
if shown to be adequate performance by calculation.

Type 3 As Type 2. As Type 2 but fundamental basic wind velocity

(Masonry: Basic) limited to 27 m/s.

Type 4 Suitable only for masonry cavity walls, comprising two Suitable for flat sites within towns and cities
(Masonry: Light Duty) leaves of similar thickness in the range of 90mm to anywhere in the UK except in the north western
150mm, in box form domestic dwelling of up to 10m fringes of Scotland and Ireland (where fundamental
in height. Not suitable for cavity walls having disparate basic wind velocity exceeds 27 m/s) and any areas
thickness or stiffness, for cladding walls of any type or for where the site is above an altitude of 150m or more
multi-storey structures of more than three storeys. Suitable above sea level.
for internal separating cavity walls in most buildings.

41
Wall Accessories

Wall Ties
All Catnic wall ties are manufactured from high quality stainless
steel wire and strip materials to ensure that structural design
and properties are maintained throughout the life cycle of the
structure.

BB-2
Length Width Cavity width Packing
191mm 19mm 50mm Cartons of 250

DD140 Part 2 1987 type 2 requirement Catnic BB-2

Tensile Load (N) At serviceability 500 1321
Tensile Load (N) At failure 1800 3183
Comprehensive Load (N) At serviceability 400 552
Comprehensive Load (N) At failure 1300 1300

BB-3
Length Width Cavity width Packing
220mm 19mm 75mm Cartons of 250

DD140 Part 2 1987 type 2 requirement Catnic BB-3

Tensile Load (N) At serviceability 500 ­1529
Tensile Load (N) At failure 1800 4051
Comprehensive Load (N) At serviceability 400 1540
Comprehensive Load (N) At failure 1300 2374

Fixings: For fixing masonry to masonry in cavity walls of domestic houses and small commercial buildings of up to three
storeys but not exceeding 15m in height. Tie density 2.4 ties/m2. Based on a design windspeed up to 56m/s.

BT 2-4
Length Width Cavity width Packing
120mm 19mm 50mm Cartons of 250

Fixings: For fixing masonry to timber framing in single and two storey dwellings up to a maximum height of 8m.
Also suitable for block to concrete applications. Tie density and windspeed refer to BBA certificate..

Stainless Steel Strip Ties

Cavity Design Tie Size (mm) Specify DD140: Part 2 Wind Speed
50mm 3 storeys up to 15m 0.6 x 19 x 191 BB-2 Type 2 Up to 56m/s
50mm 5 storeys up to 15m 0.8 x 19 x 220 BB-3 Type 2 Up to 56m/s
50mm 4 storeys up to 12m 0.6 x 19 x 120 BT 2-4 Up to 56m/s

International Product Catalogue Wall Accessories

42
 Wall Accessories

Wall Ties
Catnic Wall Ties are manufactured from stainless steel in accordance
with BS EN 10088-2-1.4301 (strip), BS EN 10088-3:2005 min. 18/8
composition (wire).

Double Triangular
Wall Tie
Ref: DTWT Available lengths are:
Double triangular Wall Ties are Manufactured Length Cavity Width
from Stainless Steel Wire with a diameter of 200mm 50mm - 75mm
3.3mm and Manufactured to BS EN 225mm* 76mm - 100mm
845-1:20033 and tested to BS EN 846-5:2000
Double Triangle Wall Ties DTWT are classed:
Type 2 (Masonry: General Purpose)
* Additional lengths available: 150mm,
200mm, 225mm, 225mm 250mm, 275mm,
300mm

Insulation Retainer
Ref: IRC85
Polypropylene insulation retainer,
85mm diameter.

43
Wall Accessories

Dovetail Slots
& Ties
Dovetail Slots
Ref: CDTS3000, CDTS100, CDTS150 Available lengths are:
Dovetail Channels are a cast in channel slot 3000mm - Bundles of 1 0
allowing vertical movement and horizontal 100mm - Boxes 100
restraint. Manufactured from Grade 304 150mm - Boxes 100
stainless steel and are pre-filled with
polystyrene to prevent the ingress of concrete
during the installation stage.
Dovetail Slots are used in conjunction
with safety-end ties. Can also be used with
De­Bonding Sleeves (CDS) where lateral
movement is required.
Dovetail slots should be cast in-situ at a
minimum of 50mm from the edge of the wall.

Dovetail Slot Ties

Ref: CDTST/ ... /SS Projection lengths available:
75mm 100mm 125mm 150mm 175mm
200mm 225mm 250mm & 300mm

CDTS Dovetail Safety End Ties

Length
75-300mm
Tensile Load (Cast in) 2960N
Tensile Load Morter End 5284N
75-200mm
Comprehensive Load Capacity 4896N
225-300mm
Comprehensive Load Capacity 1470N

Important note: Specifiers now use various wire diameters, if possible please check specification. Note: BS5628 part 2 recommends that Stainless Steel
material should be used on an external wall, including the inner leaf of a cavity wall.

44
 Wall Accessories

Head Restraint Fixings

Internal Head
Restraint
Ref: CHRF215 Available lengths are:
Head restraints are used to restrain the top Head restraint Fixing are
of a masonry free standing wall through 215mm and in box of 50 pieces
fixing to the underside of the concrete slab,
preventing sideways movement.
Head restraint fixings allow for vertical
movement to accommodate shrinkage or
thermal movement of the structural frame,
while restraining lateral loads.
Head restraint fixing are generally fixed at
450mm or 900mm dependant on the load
applied at the head of the masonry.

Head Restraint
Ref: CHR
Designed to restrain the inner leaf of a cavity Supplied in boxes of:
wall. Manufactured as two angles with 50 pieces
holes positioned to accommodate 100mm
& 140mm clock thickness. 215mm block
thickness also available.
Fixed using an MB fixing anchor (set at
torque setting 15Nm) to the underside of the
slab.

45
Wall Accessories

Bed Joint Reinforcement -

Ladder Type
Ladder Type
Ref: CLBR
Ladder type Bed Joint Reinforcement with Available lengths are:
outer wires and welded cross wires. Generally Ladder bed Joint Reinforcement
used in structural masonry or anti-crack comes in bundles of
control. Conforms to BS5268: Part 2 2000. 10 x 2.7m lengths.

Available in Stainless Steel Grade

304 S15. Galvanised also available

CLBR3 CLBR3 6
Product Ref. Product Width Wall Width Product Ref. Product Width Wall Width
CLBR3/60/2.7 60mm 100mm CLBR3.6/60/2.7 60mm 100mm
CLBR3/100/2.7 100mm 140mm CLBR3.6/100/2.7 100mm 140mm
CLBR3/150/2.7 150mm 190mm CLBR3.6/150/2.7 150mm 190mm
CLBR3/175/2.7 175mm 215mm CLBR3.6/175/2.7 175mm 215mm
3mm outer wires with 2.5mm cross wires 3.6mm outer wires with 2.5mm cross wires

Length 2700mm +/- 1.5% Length 2700mm +/- 1.5%

Profile Height 3.5mm +/- 0.4mm Profile Height 4mm +/- 0.4mm
Longitudinal Wire Size 3.0mm +/- 0.1mm Longitudinal Wire Size 3.6mm +/- 0.1mm
Cross Wire Size 2.5mm +/- 0.1mm Cross Wire Size 2.5mm +/- 0.1mm
Pitch of Cross Wires 450mm +/- 3.0% Pitch of Cross Wires 450mm +/- 3.0%
Characteristics Yield Strength 500N/mm2 Characteristics Yield Strength 500N/mm2
Lap Length 225mm Lap Length 225mm
Shear Load Capacitry Wields 2988N Shear Load Capacitry Wields 4306N

CLBR5
Product Ref. Product Width Wall Width
CLBR5/60/2.7 60mm 100mm
CLBR5/100/2.7 100mm 140mm
CLBR5/150/2.7 150mm 190mm
CLBR5/175/2.7 175mm 215mm
5mm outer wires with 2.5mm cross wires

Length 2700mm +/- 1.5%

Profile Height 3.5mm +/- 0.4mm
Longitudinal Wire Size 5.0mm +/- 0.1mm
Cross Wire Size 2.5mm +/- 0.1mm
Pitch of Cross Wires 450mm +/- 3.0% Important note: Specifiers now use various wire diameters, if possible
Characteristics Yield Strength 500N/mm2 please check specification. Note: BS5628 part 2 recommends that
Stainless Steel material should be used on an external wall, including
Lap Length 225mm
the inner leaf of a cavity wall.
Shear Load Capacitry Wields 3172N

46
 Wall Accessories

Frame Cramps & Movement Ties

Cramps
Ref: CFC
Frame Cramps are used for restraining Supplied in boxes of:
masonry to new or existing masonry and to Frame Cramps (CSEF) are
columns (steel or & concrete). Can also be supplied in Galvanised or Stainless
used for restraining non-structural elements Steel Grade 304 and supplied in
such as frames. Boxes of 250
A Plain End Frame Cramp is also available for
use with Debonding Sleeve (CDS supplied as
extra) allowing lateral movement.

CFC Movement Ties

Shear Load capacity 2060N
Minimum Embedment 62.5mm
Miniumum Mortar Joint 10mm
Protection 150mm - 300mm
Lengths 150mm, 200mm,
225mm, 250mm,
300mm

Movement Ties
Ref: CPET
Movement ties are used over a movement Supplied in boxes of:
joint in masonry providing restraint in one Movement Ties (CPET) are
direction and movement in the other when supplied in Galvanised and
used with a Debonding Sleeve (CDS supplied Stainless Steel Grade 304 and
separately) supplied in boxes of 250

CPET Movement Ties

Shear Load capacity 1180N
Minimum Embedment 62.5mm
Miniumum Mortar Joint 10mm
Protection 75mm - 300mm
Lengths 75mm, 100mm, 150mm,
175mm, 200mm,
225mm, 250mm,
300mm

Debonding Sleeves
Ref: CDS
Plastic Debonding Sleeves are suitable for Supplied in boxes of:
use with Plain Ended Frame Cramps and 100mm 120mm 150mm &
Movement Ties. 200mm in bags of 250

Expansion indicator sight

hole allows setting of the
steel insert

47
Technical Specification Clauses

Technical Specification Clauses

1. Angle bead or corner bead Stainless Architrave beads shall be 6. Expanded metal lath
Galvanised Angle bead shall be manufactured manufactured in accordance with BS EN Galvanised Expanded metal lath shall be
in accordance with BS EN 103658: 2008 Parts 103658: 2008 Parts 1 & 2 using stainless steel manufactured in accordance with BS EN
1 & 2 using galvanised steel to BS EN 10346: to BS EN 10088-2-1.4301 and to suit plaster 103658: 2008 Parts 1 & 2 using galvanised
2009-DX51D+Z275 with 45mm (53mm: thickness of 10mm and 13mm without and steel to BS EN 10346: 2009-DX51D+Z275
65mm) wing size as manufactured by Catnic with return flange as manufactured by Catnic and weighing 0.90kgs per sq.metre (1.11kgs
under code reference SS3.0 (STD3.0: WW3.0). under code reference ARC10/WF/3.0/SS per sq.metre: 1.61kgs per sq.metre) as
(ARC10/WF/3.0/SS, ARC13/W0/3.0/SS, ARC13/ manufactured by Catnic under code reference
Stainless Angle bead shall be manufactured in WF/3.0/SS, ARC20/WF/3.0/SS. DL089 (DL111: DL161).
accordance with BS EN 103658: 2008 Parts 1 &
2 using stainless steel to BS EN 10088-2-1.4301 4. Movement bead Stainless Expanded metal lath shall be
with 53mm wing size as manufactured by Galvanised Movement beads shall be manufactured in accordance with BS EN
Catnic under code reference STD3.0SS. manufactured in accordance with BS EN 103658: 2008 Parts 1 & 2 using stainless steel to
103658: 2008 Parts 1 & 2 using galvanised steel BS EN 10088-2-1.4301 and weighing 1.11kgs
2. Plasterstop or casing bead to BS EN 10346: 2009-DX51D+Z275 and to per sq.metre as manufactured by Catnic under
Galvanised Plasterstops shall be manufactured suit plaster thickness of 12mm (15mm: 18mm: code reference DL111S.
in accordance with BS EN 103658: 2008 21mm) as manufactured by Catnic under code
Parts 1 & 2 using galvanised steel to BS EN reference MB10/3.0 (MB13/3.0: MB16/3.0: 7. Rib Lath
10327-DX51D+Z275 and to suit plaster MB19/3.0). Galvanised Rib Lath shall be manufactured
thickness of 10mm (13mm: 16mm: 19mm) as in accordance with BS EN 103658: 2008 Parts
manufactured by Catnic under code reference Stainless Movement beads shall be 1 & 2 using galvanised steel to BS EN 10346:
PS10/3.0 (PS13/3.0:PS16/3.0: PS19/3.0). manufactured in accordance with BS EN 2009-DX51D+Z275 with 10mm ribs at 100mm
103658: 2008 Parts 1 & 2 using stainless steel centres and weighing 1.48kgs per sq.metre
Stainless Plasterstops shall be manufactured in to BS EN 10088-2-1.4301 and to suit plaster (1.84kgs per sq.metre: 2.22 per sq.metre) as
accordance with BS EN 103658: 2008 Parts 1 & thickness of 12mm (15mm: 18mm: 21mm) as manufactured by Catnic under code reference
2 using stainless steel to BS EN 10088-2-1.4301 manufactured by Catnic under code reference RIB148 (RIB184: RIB222).
and to suit plaster thickness of 10mm (13mm: MB10/3.0/SS (MB13/3.0/SS: MB16/3.0/SS:
16mm: 19mm) as manufactured by Catnic MB19/3.0/SS). Stainless Rib Lath shall be manufactured in
under code reference PS10/3.0/SS (PS13/3.0/ accordance with BS EN 103658: 2008 Parts
SS: PS16/3.0/SS: PS19/3.0/SS). 5. Renderstop 1 & using stainless steel to BS EN 10088-2-
Galvanised Renderstops shall be manufactured 1.4301 with 10mm ribs at 100mm centres and
3. Architrave beads in accordance with BS EN 103658: 2008 Parts weighing 1.48kgs per sq.metre (1.84kgs per
Galvanised Architrave beads shall be 1 & 2 using galvanised steel to BS EN 10346: sq.metre) as manufactured by Catnic under
manufactured in accordance with BS EN 2009-DX51D+Z275 as manufactured by Catnic code reference RIB148/SS (RIB184/SS).
103658: 2008 Parts 1 & 2 using galvanised steel under code reference RS3.0.
to BS EN 10346: 2009-DX51D+Z275 and to suit 8. Steel lintels
plaster thickness of 10mm and 13mm without Stainless Renderstops shall be manufactured Steel lintels shall be manufactured
and with return flange as manufactured in accordance with BS EN 103658: 2008 Parts in accordance with BS EN 845: 2013
by Catnic under code reference ARC10/ 1 & 2 using stainless steel to BS EN 10088-2- using galvanised steel to BS EN 10346:
WF/3.0 (ARC13/WF/3.0: ARC20/WF/3.0) or 1.4301 as manufactured by Catnic under code 2009-DX51D+Z275 and coated with a
ARC10WO/3.0 (ARC13/WO/3.0). reference RS/3.0/SS. thermosetting polyester powder coating as
manufactured by Catnic.

International Product Catalogue Technical Specification Clauses

48
Stay up to date
on the latest
Catnic News
catnic.com

49
 CATNIC WORLD

Catnic Distributors

Albania Czech Republic Hong Kong Malta Switzerland

Austria Denmark Hungary Northern Ireland Turkey
Bahrain Egypt Ireland Norway Uganda
Belgium Estonia Jordon Oman United Arab Emirates
Bosnia Herzegovina France Kuwait Quatar United Kingdom
Bulgaria Germany Latvia Romania
Canary Islands Gibraltar Lebanon Saudi Arabia
Croatia Greece Lithuania Slovakia
Cyprus Holland Macedonia Sweden

International Product Catalogue Catnic Distributors

50
 Catnic Products Used

Afghanistan Libya Taiwan

Australia Morocco Uzbekistan
Bermuda Nigeria Vietnam
Grenada Russia
India Senegal
Iraq South Africa
Kenya Singapore

51
 www.catnic.com

Catnic Conditions of Sale can be downloaded from

www.catnic.com

Care has been taken to ensure that the

contents of this publication are accurate, but
Tata Steel Europe Limited and its subsidiaries,
which includes Tata Steel UK Limited, do not
accept responsibility or liability for errors
or information that is found to be misleading.
Suggestions for, or descriptions of, the end use
or application of products or methods of working
are for information only and Tata Steel Europe
Limited and its subsidiaries accept no liability in
respect thereof.

Before using products or services supplied or

manufactured by Tata Steel Europe Limited
and its subsidiaries, customers should satisfy
themselves as to their suitability.

Catnic reserves the right to change information

contained within this brochure at any time.

© Copyright 2019 Tata Steel UK Limited

Catnic
Pontypandy Industrial Estate
Caerphilly
CF83 3GL
T: 029 2033 7900
F: 029 2086 7796
www.catnic.com

English version

52