SAVITRIBAI PHULE PUNE UNIVERSITY

(Formerly University of Pune)

EXAMINATION CIRCULAR NO. 192 OF. 2023

THIRD YEAR ENGINEERING (2019 PATTERN)
End Sem Examination of April/May - 2023
(Under Faculty of SCIENCE AND TECHNOLOGY: B)ENGINEERING)
INSTRUCTIONS FOR CANDIDATES

• Candidates are required to be present at the examination centre, THIRTY

MINUTES before the stipulated time.

• Candidates are forbidden from taking any material into the examination hall
that can be treated as a malpractice.

• Candidates are requested to see the Notice Board at their center of

examination regularly for changes if any that may be notified later in the
program.

• No request shall be granted for change in time or date for the University
Examination on any ground.

• Candidates are requested to note the Day, Date and Time of Paper.

• Candidates are permitted to use stencils at the time of examination.

• The exchanges of side-rules, drawing instruments of othermaterials used in

the examination hall is not permitted at the time of examination. Candidates
must bring their own instruments and will not be allowed to borrow from
each other under any circumstances.

• Use of non-programmable battery operated electronic pocket size Calculator

is allowed. The exchange of Calculators is not allowed. Electronics
Devices including mobile are not allowed at the time of examination.

• The written examination will be conducted in the following order.

1
 AUTOMOBILE
SEM-II

2019 Course
Day & Date Time : 11:00 AM To 01:30 PM

Wednesday
Automotive Refrigeration and Air Conditioning (316485)
21-06-2023

Friday
Automotive Chassis and Transmission (316486)
23-06-2023

Monday
Design of Engine Components (316487)
26-06-2023

ELECTIVE-II Automotive Aerodynamics and Body Engineering (316488-A)

Friday
30/06/2023
ELECTIVE-II Automotive Materials (316488-B)

SEM-I
2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM

Tuesday
Numerical & Optimization Methods (316481)
06-06-2023

Thursday
Heat Transfer (316482)
08-06-2023

Saturday
Design of Machine Components (316483)
10-06-2023

Tuesday
Automobile Electrical and Electronics (316484)
13-06-2023

ELECTIVE-I Advanced Forming & Joining Processes (302045-A)*

Thursday
15-06-2023
ELECTIVE-I Machining Science and Technology (302045-B)*

Note :- * Common with Mechanical

2
 CHEMICAL
SEM-II
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Wednesday
Chemical Reaction Engineering I (309348)
21-06-2023
Friday
Mass Transfer II (309349)
23-06-2023

Monday
Transport Phenomena (309350)
26-06-2023

ELECTIVE-II Energy Conservation in Chemical Process Industries (309351 A)

ELECTIVE-II Process Instrumentation and Control (309351 B)

Friday
30/06/2023
ELECTIVE-II Corrosion Engineering (309351 C)

ELECTIVE-II Artificial intelligence and Data Science (309351 D)

SEM-I
2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM
Tuesday
Mass Transfer-I (309341)
06-06-2023
Thursday
Chemical Technology -II (309342)
08-06-2023

Saturday
Chemical Engineering Mathematics (309343)
10-06-2023
Tuesday
Chemical Engineering Thermodynamics (309344)
13-06-2023

ELECTIVE-I Chemical Industry Management (409345A)

ELECTIVE-I Food Technology (309345 B)

Thursday
15-06-2023
ELECTIVE-I Polymer Engineering (309345 C)

ELECTIVE-I Downstream Processing (309345 D)

3
 CIVIL
SEM-II
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Wednesday
Waste Water Engineering ( 301012)
21-06-2023
Friday
Design of RC Structures (301013)
23-06-2023
Monday
Remote Sensing and GIS (301014)
26-06-2023

ELECTIVE-II Advanced Engineering Geology with Rock Mechanics (301015 a)

ELECTIVE-II Soft Computing Techniques (301015 b)

ELECTIVE-II Advanced Surveying. (301015 c)

Friday
30/06/2023
ELECTIVE-II Advanced Geotechnical Engineering (301015 d)

ELECTIVE-II Architecture and Town Planning (301015 e)

ELECTIVE-II Solid Waste Management (301015 f)

SEM-I
2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM
Tuesday
Hydrology and Water Resources Engineering (301001)
06-06-2023

Thursday
Water Supply Engineering (301002)
08-06-2023

Saturday
Design of Steel Structures (301003)
10-06-2023
Tuesday
Engineering Economics and Financial Management (301004)
13-06-2023

ELECTIVE-I Advanced Fluid Mechanics and Hydraulic Machines (301005 a)

ELECTIVE-I Research Methodology and IPR (301005 b)

ELECTIVE-I Construction Management. (301005 c)

Thursday
15-06-2023
ELECTIVE-I Advanced Concrete Technology (301005 d)

ELECTIVE-I Matrix Methods of Structural Analysis (301005 e)

ELECTIVE-I Advanced Mechanics of Structures (301005 f)

4
 COMPUTER
SEM-II
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Wednesday
Data Science and Big Data Analytics (310251)
21-06-2023
Friday
Web Technology (310252)
23-06-2023
Monday
Artificial Intelligence (310253)
26-06-2023

ELECTIVE-II Information Security (310254 A)

ELECTIVE-II Augmented and Virtual Reality (310254 B)

Friday
30/06/2023
ELECTIVE-II Cloud Computing (310254 C) *

ELECTIVE-II Software Modeling and Architectures (310254 D) *

SEM-I
2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM
Tuesday
Database Management Systems (310241) *
06-06-2023
Thursday
Theory of Computation (310242)
08-06-2023
Saturday
Systems Programming and Operating System (310243)
10-06-2023
Tuesday
Computer Networks and Security (310244)
13-06-2023

ELECTIVE-I Internet of Things and Embedded Systems (310245 A)

ELECTIVE-I Human Computer Interface (310245 B)

Thursday
15-06-2023
ELECTIVE-I Distributed Systems (310245 C)

ELECTIVE-I Software Project Management (310245 D)

Note :- * Common with A.I.D.S.

5
 ELECTRICAL
SEM-II
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Wednesday
Power System-II (303148)
21-06-2023

Friday
Computer Aided Design of Electrical Machines (303149)
23-06-2023

Monday
Control System Engineering (303150)
26-06-2023

ELECTIVE-II IoT and its Applications in Electrical Engineering (303151 A)

ELECTIVE-II Electrical Mobility (303151 B)

Friday
30/06/2023
ELECTIVE-II Cybernetic Engineering (303151 C)

ELECTIVE-II Energy Management (303151 D)

SEM-I
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM

Tuesday
Industrial and Technology Management (303141)
06-06-2023

Thursday
Power Electronics (303142)
08-06-2023

Saturday
Electrical Machines-II (303143)
10-06-2023

Tuesday
Electrical Installation Design and Condition Based Maintenance (303144)
13-06-2023

ELECTIVE-I Advanced Microcontroller and Embedded System (303145 A)

Thursday
ELECTIVE-I Digital Signal Processing (303145 B)
15-06-2023

ELECTIVE-I Open Elective (303145 C)

6
 ELECTRONICS
SEM-II
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Wednesday
Fundamentals of HDL (304212)
21-06-2023
Friday
Embedded Processors and Applications (304213)
23-06-2023
Monday
Industrial Management (304214)
26-06-2023

ELECTIVE-II PLC & Automation (304215 )

ELECTIVE-II Advanced JAVA Programming (304195) *

Friday
ELECTIVE-II Digital Signal Processing (304215 )
30/06/2023

ELECTIVE-II Fiber Optic Communication (304215 )

ELECTIVE-II e Mobility (304215 E)

Note : *Common with E&TC

SEM-I
2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM
Tuesday
Power and Industrial Electronics (304201)
06-06-2023
Thursday
Electromagnetic Waves and Propagation Theory (404202)
08-06-2023
Saturday
Database Management (304183) *
10-06-2023
Tuesday
Microcontrollers and Applications (304204)
13-06-2023

ELECTIVE-I Instrumentation systems (304205 )

ELECTIVE-I Machine Learning (304205 )

Thursday
15-06-2023 ELECTIVE-I Fundamentals of JAVA Programming (304185) *

ELECTIVE-I Data Communication (304205 )

ELECTIVE-I Computer Networks (304205 )

Note :- * Common with E&TC

7
 ELECTRONICS & TELECOMMUNICATION
SEM-II
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Wednesday
Cellular Networks (304192)
21-06-2023
Friday
Project Management (304193)
23-06-2023
Monday
Power Devices & Circuits (304194)
26-06-2023
ELECTIVE-II Digital Image Processing (304195)

ELECTIVE-II Sensors in Automation (304195 )

Friday
30/06/2023 ELECTIVE-II Advanced JAVA Programming (304195) *

ELECTIVE-II Embedded Processors (304195 )

ELECTIVE-II Network Security (304195)

Note :- * Common with Electronics

SEM-I
2019 Course
Day & Date Time : 11:00 AM To 01:30 PM
Tuesday
Digital Communication (304181)
06-06-2023
Thursday
Electromagnetic Field Theory (304182)
08-06-2023
Saturday
Database Management (304183) *
10-06-2023
Tuesday
Microcontrollers (304184)
13-06-2023

ELECTIVE-I Digital Signal Processing (304185 )

ELECTIVE-I Electronic Measurements (304185 )

Thursday
15-06-2023
ELECTIVE-I Fundamentals of JAVA Programming (304185 ) *

ELECTIVE-I Computer Networks (304185 )

Note :- * Common with Electronics

8
 INFORMATION TECHNOLOGY
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Computer Networks & Security (314451)
21-06-2023
Friday
Data Science and Big Data Analytics (314452)
23-06-2023
Monday
Web Application Development (414464A)
26-06-2023

ELECTIVE-II Artificial Intelligence (314454 A)

ELECTIVE-II Cyber Security (314454 B)

Friday
30/06/2023
ELECTIVE-II Cloud Computing (314454 C)

ELECTIVE-II Software Modeling and Design (314454 D)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Tuesday
Theory of Computation (314441)
06-06-2023
Thursday
Operating Systems (314442)
08-06-2023
Saturday
Machine Learning (314443)
10-06-2023
Tuesday
Human Computer Interaction (314444)
13-06-2023

ELECTIVE-I Design and Analysis of Algorithm (314445 A)

ELECTIVE-I Advanced Database and Management System (314445 B)

Thursday
15-06-2023
ELECTIVE-I Design Thinking (314445 C)

ELECTIVE-I Internet of Things (314445 D)

9
 INSTRUMENTATION & CONTROL
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Internet of Things (306268)
21-06-2023
Friday
Industrial Automation‐II (306269)
23-06-2023
Monday
Digital Signal Processing (306270)
26-06-2023

ELECTIVE-II Building Automation (306271 A)

ELECTIVE-II Machine Learning (306271 B)

Friday
30/06/2023
ELECTIVE-II Electrical Drives (306271 C)

ELECTIVE-II Analytical Instrumentation (306271 D)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Tuesday
Embedded Systems (306261)
06-06-2023
Thursday
Industrial Automation‐I (306262)
08-06-2023

Saturday
Modern Control Theory (306263)
10-06-2023

Tuesday
Operating System (306264)
13-06-2023

ELECTIVE-I Mechatronics & Robotics (306265 A)

ELECTIVE-I Data Science (306265 B)

Thursday
15-06-2023
ELECTIVE-I Power Electronics (306265 C)

ELECTIVE-I Bio-Medical Instrumentation (306265 D)

10
 MECHANICAL
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Artificial Intelligence & Machine Learning (302049)
21-06-2023
Friday Computer Aided Engineering (302050)
23-06-2023

Monday
Design of Transmission Systems (302051)
26-06-2023

ELECTIVE-II Composite Materials (302052-A)

Friday
30/06/2023
ELECTIVE-II Surface Engineering (302052-B)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM

Tuesday
Numerical & Statistical Methods (302041) *
06-06-2023

Thursday
Heat & Mass Transfer (302042) *
08-06-2023

Saturday
Design of Machine Elements (302043) *
10-06-2023

Tuesday
Mechatronics (302044) *
13-06-2023

ELECTIVE-I Advanced Forming & Joining Processes (302045-A)

Thursday
15-06-2023
ELECTIVE-I Machining Science & Technology (302045-B)

NOTE:- * Common to Mechanical Sandwich Engineering

11
 MECHANICAL-SANDWICH

SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Process Planning & Tool Selection (Self-Study-I) (302066)
21-06-2023
Friday Advanced Materials & Manufacturing (Self-Study-II) (302067)
23-06-2023

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM

Tuesday
Numerical & Statistical Methods (302041) *
06-06-2023

Thursday
Heat & Mass Transfer (302042) *
08-06-2023

Saturday Design of Machine Elements (302043) *

10-06-2023

Tuesday
Mechatronics (302044) *
13-06-2023

Thursday Fundamentals of Computer Aided Engineering (302061)

15-06-2023

NOTE:- * Common to Mechanical Engineering

Page 17 of 23
 B. Tech. Biotechnology
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Fermentation Technology (315471)
21-06-2023
Friday
Mass Transfer (315472)
23-06-2023
Monday
Bioseparation Engineering (315473)
26-06-2023

ELECTIVE-II Instrumentation and Process Control (315474 A)

Friday
ELECTIVE-II Food Biotechnology (315474 B)
30/06/2023

ELECTIVE-II Data base management systems (315474 C)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM

Tuesday
Analytical Techniques (315461)
06-06-2023

Thursday
Material Balances and Stoichiometry (315462)
08-06-2023

Saturday
Genetic Engineering (315463)
10-06-2023

Tuesday
Introduction to Immunology (315464)
13-06-2023

ELECTIVE-I Enzyme Technology (315465 A)

Thursday ELECTIVE-I Good Laboratory Practices and Good Manufacturing Practices

15-06-2023 (315465 B)

ELECTIVE-I Agricultural Biotechnology (315465 C )

Page 18 of 23
 Printing
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Flexo Printing Techniques (308289)
21-06-2023
Friday
Color Management (308290)
23-06-2023
Monday
Design of Experiments (308291)
26-06-2023

ELECTIVE-II Maintenance Management of Printing Machines (308293 A)

Friday
ELECTIVE-II Basic Communication Systems and Electronic Instrumentation (308293 B)
30/06/2023

ELECTIVE-II E-Publishing (308293 C)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM

Tuesday
Print Statistics (308281)
06-06-2023

Thursday
Offset Printing Techniques (308282)
08-06-2023

Saturday
Color Science and Measurement (308283)
10-06-2023

Tuesday
Ink Technology (308284)
13-06-2023

ELECTIVE-I Cyber Security (308286 A)

Thursday
ELECTIVE-I Wood, Glass and Metal Based Packaging (308286 B)
15-06-2023

ELECTIVE-I Engineering Ethics (308286 C )

Page 19 of 23
 Production
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM

Wednesday
Production Tooling (311088 (A)
21-06-2023

Friday
Production and Operations Management (311089) (A)
23-06-2023

Monday
Process Engineering and Resource Planning (311090 (A)
26-06-2023

ELECTIVE-II Product Design and Development (311091 (A)-I)

ELECTIVE-II Nano Manufacturing (311091 (A)-II)

Friday
30/06/2023
ELECTIVE-II Statistics and Numerical Methods (311091 (A)-III)

ELECTIVE-II Financial Management and Costing (311091 (A)-IV)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM

Tuesday
Engineering Metrology and Instrumentation (311081 (A)
06-06-2023

Thursday
Material Forming Technology (311082 (A)
08-06-2023

Saturday
Machining Science and Technology (311083 (A)
10-06-2023

Tuesday
Kinematics and Design of Machines (311084 (A)
13-06-2023

ELECTIVE-I Finite Element Analysis (311085 (A)-I)

ELECTIVE-I Advances in Manufacturing Processes (311085 (A)-II)

Thursday
15-06-2023
ELECTIVE-I Mechatronics (311085 (A)-III )

ELECTIVE-I Supply Chain Management (311085 (A)-IV )

Page 20 of 23
 Production Sandwich
SEM-II
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Wednesday
Kinematics and Design of Machines (311084 (A)
21-06-2023
Friday
Material forming and Mould Design (311124 (A)
23-06-2023

Monday
Metrology & Quality Control (311125 (A)
26-06-2023

Friday
Statistics and Numerical Optimization methods (311088 (A)
30/06/2023

ELECTIVE-II Advanced Materials (311126 (A)-I)

ELECTIVE-II Costing and Cost Control (311126 (A)-II)

Monday
03/07/2023
ELECTIVE-II Advanced Joining Technology (311126 (A)-III)

ELECTIVE-II World Class Manufacturing (311126 (A)-IV)

SEM-I
Day & Date 2019 Course
Time : 11:00 AM To 01:30 PM
Tuesday
Manufacturing Technology (Self Study) (311122 (A)
06-06-2023

Page 21 of 23
 Automation and Robotics
SEM-II
2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM

Wednesday
21-06-2023 Sensors and Vision Systems in Robots (302527 )

Friday
23-06-2023 Artificial Intelligence in Robots (302528 )

Monday
26-06-2023 Modelling and Simulation (302529 )

ELECTIVE-II Machining Science and Technology ( 302530-A )

Friday
30/06/2023
ELECTIVE-II Maintenance and Safety Engineering ( 302530-B)

SEM-I

2019 Course
Day & Date
Time : 11:00 AM To 01:30 PM

Tuesday
Design of Robot Elements (302521 )
06-06-2023

Thursday
Robot Kinematics and Dynamics (302522 )
08-06-2023
Saturday
Computer Aided Engineering and Manufacturing (302523 )
10-06-2023
Tuesday
Signal Processing and Conditioning (302524 )
13-06-2023

ELECTIVE-I Advanced Forming & Joining Processes (302525-A )

Thursday
15-06-2023
ELECTIVE-I Optimization Techniques (302525-B)

Page 22 of 23
 Electronics and Computer Engineering
SEM-II

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Wednesday
Software Engineering and Project Management (310352)
21-06-2023
Friday
Computer Networks and Security (310353)
23-06-2023
Monday
Embedded Processors & Applications (310354)
26-06-2023

Software Modeling and Design (Elective - II) (310355 A)

Advanced Database Management Systems (Elective -II) (310355 B)

Friday
30/06/2023
Power Electronics (Elective - II) (310355 C)

PLC and Automation (Elective - II) (310355 D)

SEM-I

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Tuesday
06-06-2023 Database Management Systems [310341]
Thursday
08-06-2023 Advanced Java Programming [310342]
Saturday
10-06-2023 Data Communication [310343]
Tuesday
13-06-2023 Microcontroller and Applications [310344]

ELECTIVE-I Distributed Systems [310345 A]

Thursday ELECTIVE-I Block Chain Technology [310345 B]

15-06-2023
ELECTIVE-I Digital Signal Processing [310345 C]

ELECTIVE-I Sensors and Applications [310345 D]

Page 23 of 23
 Mechatronics Engineering
SEM-II

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM

Wednesday
Industrial Automation (317547)
21-06-2023

Friday
Electro-Mechanical System (317548)
23-06-2023

Monday
Finite Element Analysis (317549)
26-06-2023

Friday
Embedded System Design (317550)
30/06/2023

Monday
Artificial Intelligence & Machine Learning (317551 )
03/07/2023

SEM-I

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM

Tuesday
Machine Design [317541]
06-06-2023

Thursday
Manufacturing Processes [317542]
08-06-2023

Saturday
Control System [317543]
10-06-2023

Tuesday
Digital Signal Processing [317544]
13-06-2023

Thursday
15-06-2023 Microcontrollers [317545]

Page 19 of 23
 Robotics and Automation Engineering
SEM-II

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM

Wednesday
Robot Programming (311508(A))
21-06-2023

Friday
Artificial Intelligence for Robotics (311509(A))
23-06-2023

Monday
Flexible Manufacturing Systems (311510(A))
26-06-2023

Micro-electro-mechanical Systems (Elective - II) (311511(A)-I)

Humanoid Robots (Elective -II) (311511(A)-II)

Friday
30/06/2023
Modeling and Simulation (Elective - II) (311511(A)-III)

Swarm Intelligence in Robotics (Elective - II) (311511(A)-IV)

SEM-I

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Tuesday
Embedded systems in Robotics [311501] (A)
06-06-2023
Thursday
Hydraulics and Pneumatics [311502] (A)
08-06-2023
Saturday
Robot Kinematics and Dynamics [311503] (A)
10-06-2023
Tuesday
Sensors Technology [311504] (A)
13-06-2023

ELECTIVE-I Statistics and Numerical Methods [311505] (A)-I

ELECTIVE-I Finite Element Analysis [311505] (A)-II

Thursday
15-06-2023
ELECTIVE-I Industrial Robotics and Material handling Systems [311505] (A)-III

ELECTIVE-I Intelligent Manufacturing System [311505] (A)-IV

Page 20 of 23
 Artificial Intelligence and Data Science
SEM-II

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Wednesday
Data Science (317529)
21-06-2023
Friday
Cyber security (317530)
23-06-2023
Monday
Artificial Neural Network (317531)
26-06-2023
Robotics and Automation (Elective - II) (317532 (A))

Natural Language Processing (Elective -II) (317532(B))

Friday
30/06/2023
Cloud Computing (Elective - II) (310254 (C)) *

Software Modeling and Architecture (Elective - II) (310254 (D)) *

SEM-I

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Tuesday
Data Base Management System [310241] *
06-06-2023
Thursday
Computer Networks [317521]
08-06-2023
Saturday
Web Technology [310252]
10-06-2023
Tuesday
Artificial Intelligence [310253]
13-06-2023

ELECTIVE-I Embedded Systems & Security [317522] (A)

ELECTIVE-I Design Thinking [314445] (C)

Thursday
15-06-2023
ELECTIVE-I Pattern Recognition [317522] (B)

ELECTIVE-I Human Computer Interface [310245] (B)

Note :- * Common with Computer Engineering

Page 20 of 23
 Artificial Intelligence and Machine Learning

SEM-II

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Wednesday
Machine intelligence for Data Science (318552)
21-06-2023
Friday
Data Mining & Warehousing (318553)
23-06-2023
Monday
Artificial Neural Network (318554)
26-06-2023
Industrial Internet of Things (Elective - II) (318555 (A))

Brain computer interface (Elective -II) (318555 (B))

Friday
30/06/2023
AI for cyber security (Elective - II) (318555 (C))

Video Analytics (Elective - II) (318555 (D))

SEM-I

Day & Date 2019 Course

Time : 11:00 AM To 01:30 PM
Tuesday
Design and analysis of Algorithm [318541]
06-06-2023
Thursday
IoT with Artificial Intelligence [318542]
08-06-2023
Saturday
Web Technology [318543]
10-06-2023
Tuesday
Management & Entrepreneurship for IT Industry [318544]
13-06-2023

ELECTIVE-I Robotics [318545] (A)

ELECTIVE-I Pattern Recognition [318545] (B)

Thursday
15-06-2023
ELECTIVE-I Information Security [318545] (C)

ELECTIVE-I Business Intelligence [318545] (D)

Page 21 of 23
 HONORS / MINORS
SEM-I

2019 Course
Day & Date Honors / Minors
Time : 11:00 AM To 01:30 PM

Artificial Intelligence And Machine Computational Statistics (310301)

Cyber Security Information and Cyber Security (310401)

Data Science Data Science and Visualization (310501)

Embedded Systems and Internet of Things

Internet of Things
(310601)

Virtual Reality And Augmented Reality Virtual Reality (310701)

Foundations of systems & systems engineering

Systems Engineering
(302041MJ)

Energy Management in Utility Systems Energy Management (302021MJ)

Saturday
17-06-2023
Electric Vehicles e-Vehicle Technology (302031MJ)

3D Printing Additive Manufacturing Technology (302011MJ)

Robotics Principles of Robotics (304181 HR)

Block Chain Technology Introduction to Block chain (304181 HBCT)

Metro Construction Surveying in Metro construction (301301)

Urban Housing and Infrastructure Planning

Architecture and Town Planning
(301401)

Advanced Packaging Technology Internet of Things (308211)

Page 22 of 23
 HONORS / MINORS
SEM-II

2019 Course
Day & Date Honors / Minors
Time : 11:00 AM To 01:30 PM

Artificial Intelligence And Machine Artificial Intelligence (310303)

Enterprise Architecture and Components

Cyber Security
(310403)

Data Science Statistics and Machine Learning (310503)

Internet of Things Architectures, Protocols and

Internet of Things
Systems Programming (310603)

Virtual Reality And Augmented Reality Augmented Reality (310703)

Systems Engineering Model Based Systems Engineering (302043MJ)

Energy Efficiency of Thermal Utilities

Energy Management in Utility Systems
(302023MJ)
Tuesday
04/07/2023 Electric Vehicles e-Vehicle System Design (302033MJ)

3D Printing Design for Additive Manufacturing (302013MJ)

Robotics Robot Programming & Simulation (304183 HR)

Decentralize & Blockchain Technologies

Block Chain Technology
(304183 HBCT)

Planning and Quantity estimation for metro

Metro Construction
construction (301303)

Sustainable Architecture and Landscape Design

Architecture and Town Planning
(301403)

Advanced Packaging Technology Smart Packaging ( 308213 )

Ganeshkhind, Pune - 411 007

Ref.No/ XCT/399
Date: 10 / 05 / 2023 Director
Board of Examinations and Evaluation

Page 23 of 23