Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    TM 210728 SRT

    Uploaded by

    ömer cılız
    This inspection certificate summarizes the testing and results of M8x30 bolts with a property class of 8.8. Various dimensional measurements were taken and found to be within specified tolerances. Mechanical tests for tensile strength, elongation, hardness and surface integrity also met standards. Chemical composition and microstructure were verified to match supplier specifications. The bolts were certified to have been manufactured according to ISO 898-1 standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TM 210728 SRT

    Uploaded by

    ömer cılız
    43 views3 pages
    This inspection certificate summarizes the testing and results of M8x30 bolts with a property class of 8.8. Various dimensional measurements were taken and found to be within specified tolerances. Mechanical tests for tensile strength, elongation, hardness and surface integrity also met standards. Chemical composition and microstructure were verified to match supplier specifications. The bolts were certified to have been manufactured according to ISO 898-1 standards.

    Original Description:

    rtr

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This inspection certificate summarizes the testing and results of M8x30 bolts with a property class of 8.8. Various dimensional measurements were taken and found to be within specified tolerances. Mechanical tests for tensile strength, elongation, hardness and surface integrity also met standards. Chemical composition and microstructure were verified to match supplier specifications. The bolts were certified to have been manufactured according to ISO 898-1 standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views3 pages

    TM 210728 SRT

    Uploaded by

    ömer cılız
    This inspection certificate summarizes the testing and results of M8x30 bolts with a property class of 8.8. Various dimensional measurements were taken and found to be within specified tolerances. Mechanical tests for tensile strength, elongation, hardness and surface integrity also met standards. Chemical composition and microstructure were verified to match supplier specifications. The bolts were certified to have been manufactured according to ISO 898-1 standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Norm Cıvata A.Ş. EN 10204 – 3.

    1
    15.12.2020
    INSPECTION CERTIFICATE
    DESCRIPTION M8x30 933-4017 8.8 C440 LOT NO B549A175 TEMPERATURE 22±3

    PROPERTY CLASS 8.8 COATING ZN CR+3 MAVI BILL OF LADING NO 8000545474

    NORM PART NO 920510000 CUSTOMER PART NO STOK BILL OF LADING QTY. 300

    TOP COATING USTLAK YOK ORDER NO

    COMPOSITION (From Çekme Kesit Sulama


    %Mn %C %P %S %Si %Cr %Ni %Mo %Cu %Al %Ti
    Supplier) Dayanımı Daralması Sertliği

    CHARGE NO 10039135 0,9900 0,2400 0,0060 0,0030 0,1000 0,2000 0,0400 0,0100 0,0800 577,0000 57,0000 0,0280 0,0360 43,0000

    DIMENSIONS 26.11.2020
    TOLERANCE
    NO CRITERIA DESCRIPTION CONTROL DEVICE CONTROL RESULTS
    INTERVAL
    Min Max 1 2 3 4 5 QUANTITY RESULTS
    20 Major diameter 7,76 7,97 Digital mikrometre 7,86 7,86 7,86 7,86 7,86 5 OK
    30 Pitch diameter 7,04 7,16 Pitch micrometer 7,05 7,05 7,05 7,05 7,05 5 OK
    40 Distance under head 1,25 3,75 Profile projection 2,30 2,30 2,30 2,30 2,30 5 OK
    50 Go Gauge Contr. ISO 6g Thread Go/NoGo gauge (6 OK 5 OK
    60 No-go Gauge Contr. ISO 6g Thread Go/NoGo gauge (6 OK 5 OK
    120 Width across flats 12,73 13,00 Digital caliper 12,8 12,85 12,82 12,86 12,81 5 OK
    130 Width across corners 14,38 999999,0 Digital caliper 14,48 14,45 14,47 14,49 14,47 5 OK
    150 Length 29,58 30,42 Digital caliper 29,8 29,85 29,86 29,83 29,86 5 OK
    190 Marking control Visual OK 5 OK
    Tests are made according to ISO 898-1
    We hereby certify that the parts have been manufactured according to requirements of the applicable standards and found in comformity with its standards.
    This document was created via computer. It is valid without signature.
    Form No:

    Prepared By Approval By

    Quality Assurance Responsible Quality Assurance Manager


    Norm Cıvata A.Ş. EN 10204 – 3.1
    15.12.2020
    INSPECTION CERTIFICATE
    DESCRIPTION M8x30 933-4017 8.8 C440 LOT NO B549A175 TEMPERATURE 22±3

    PROPERTY CLASS 8.8 COATING ZN CR+3 MAVI BILL OF LADING NO 8000545474

    NORM PART NO 920510000 CUSTOMER PART NO STOK BILL OF LADING QTY. 300

    TOP COATING USTLAK YOK ORDER NO

    COMPOSITION (From Çekme Kesit Sulama


    %Mn %C %P %S %Si %Cr %Ni %Mo %Cu %Al %Ti
    Supplier) Dayanımı Daralması Sertliği

    CHARGE NO 10039135 0,9900 0,2400 0,0060 0,0030 0,1000 0,2000 0,0400 0,0100 0,0800 577,0000 57,0000 0,0280 0,0360 43,0000

    MECHANICAL 26.11.2020
    TOLERANCE
    NO CRITERIA DESCRIPTION CONTROL DEVICE CONTROL RESULTS
    INTERVAL
    Min Max 1 2 3 4 5 QUANTITY RESULTS
    10 Wedge Loading Test Tensile testing machine OK 5 OK
    20 Tensile strength (MPa) 800,00 1000,00 Tensile testing machine 930 935 936 933 935 5 OK
    30 % Elongation 12,00 999999,0 Tensile testing machine 18 18 17 17 18 5 OK
    40 Hardness (HRc) 22,00 32,00 Hardness (HRc) testing ma 28 29 29 28 29 5 OK
    50 Surface Hardness (HV0.3) 250,00 320,00 Hardness (Hv) testing mach 300 302 306 303 301 5 OK
    60 Decarburization (HV) 0,00 30,00 Hardness (Hv) testing mach 8 1 OK
    80 Surface integrity Macroscope OK 5 OK

    Tests are made according to ISO 898-1


    We hereby certify that the parts have been manufactured according to requirements of the applicable standards and found in comformity with its standards.
    This document was created via computer. It is valid without signature.
    Form No:

    Prepared By Approval By

    Quality Assurance Responsible Quality Assurance Manager


    Norm Cıvata A.Ş. EN 10204 – 3.1
    15.12.2020
    INSPECTION CERTIFICATE
    DESCRIPTION M8x30 933-4017 8.8 C440 LOT NO B549A175 TEMPERATURE 22±3

    PROPERTY CLASS 8.8 COATING ZN CR+3 MAVI BILL OF LADING NO 8000545474

    NORM PART NO 920510000 CUSTOMER PART NO STOK BILL OF LADING QTY. 300

    TOP COATING USTLAK YOK ORDER NO

    COMPOSITION (From Çekme Kesit Sulama


    %Mn %C %P %S %Si %Cr %Ni %Mo %Cu %Al %Ti
    Supplier) Dayanımı Daralması Sertliği

    CHARGE NO 10039135 0,9900 0,2400 0,0060 0,0030 0,1000 0,2000 0,0400 0,0100 0,0800 577,0000 57,0000 0,0280 0,0360 43,0000

    PLATING 26.11.2020
    TOLERANCE
    NO CRITERIA DESCRIPTION CONTROL DEVICE CONTROL RESULTS
    INTERVAL
    Min Max 1 2 3 4 5 QUANTITY RESULTS
    10 Color/Visual Cont. Visual OK OK OK OK OK 5 OK
    20 Go gauge control-ISO 6h Thread Go/NoGo gauge (6 OK OK OK OK OK 5 OK
    30 No-go Gauge Contr. ISO 6h Thread Go/NoGo gauge (6 OK OK OK OK OK 5 OK
    40 Adhesion (Zinc) Visual inspection OK OK OK OK OK 5 OK
    50 Corrosion resistance (White) 72 Salt spray test chamber OK OK OK OK OK 5 OK
    60 Corrosion resistance (Red) 120 Salt spray test chamber OK OK OK OK OK 5 OK
    70 Plating Thickness 7,00 999999,0 X-Ray coating thickness tes 10 10 10 10 10 5 OK

    TM 210728 SRT

    Tests are made according to ISO 898-1


    We hereby certify that the parts have been manufactured according to requirements of the applicable standards and found in comformity with its standards.
    This document was created via computer. It is valid without signature.
    Form No:

    Prepared By Approval By

    Quality Assurance Responsible Quality Assurance Manager

    You might also like