• Contactless measurement according to the eddy current principle. • Measurement of static and dynamic processes possible. • Integrated electronics for sig- nal - processing in transducer housing. • Operation in explosion hazard- ous areas possible. • Transducer MMG 1070/. TS is available in four different di- mensions. • Suitable for industrial applica- tions. • Design meets common interna- tional standards, e.g. API 670, DIN 45670, VDI 2059
Application: The displacement transducer MMG The necessary electronics for the signal The epro eddy current displacement 1070/. TS is designed to measure me- processing is integrated in the trans- transducer MMG 1070/. TS is available chanical machine parameters such as ducer housing. in seven different versions, who differ in shaft vibrations, shaft displacements A complete measuring chain consists of the overall length, the usable thread and speeds. The measurement is con- a displacement transducer and a meas- length and the cable length of the trans- tactless according to the eddy current uring amplifier, e.g. a monitor of the ducer. principle on electrically conducting MMS 6000 Machine Supervisory Sys- material. tem. Machine Monitoring Systems
Technical Data: Operating temperature range: Power consumption: Cable protection: 0...+ 100°C max. 15 mA, at nominal power PG9-connection for cable protec- Operating frequency range: and unloaded output tion is provided, e.g. MPT 064 0...15 kHz (-3dB) typical: Class of protection: Displacement measuring range: 8…12 mA IP 67 2,15 mm Housing material: Intrinsic safety protection: Residual gap: material No.1.4541 II 1G, EEx ia IIC T6, Ta<53°C approx. 0,5 mm ( X10CrNiTi 1810 ) II 1G, EEx ia IIC T4, Ta<60°C Sensitivity: Standard cable: II 1G, EEx ia IIC T3, Ta<90°C 2 7,87 V/mm (200 mV/mil) 4 - core (4 x 0,2 mm ) PTB 03 ATEX 2151 2 Mean voltage: one supplementary core (0,5mm ) Weight: net / gros -10,00 V at the cable end for screen Type .../1 TS appr. 0,6 kg / 0,7 kg Voltage output limits: connection Type .../2 TS appr. 0,8 kg / 0,9 kg appr. -1,5...-21,5 V at Usupply=-24 V PTFE - isolation Type .../3 TS appr. 1,1 kg / 1,2 kg (or -1,5....(Usupply +2,5 V) e.g.: -1,5...-19,5 V Terminal connections: Type .../4 TS appr. 0,7 kg / 0,8 kg at Usupply=-22 V) red………………... SIGNAL Scope of supply: Power supply: blue………………. - 24 Volt - Core end tubing to be used for -24 V nominal ( -18....-32 V ) black……………… 0 Volt cable shortening white……………… 0 V, - Nut size 36 connected to black at the sensor green/yellow…….. SCREEN
Dimensions:
wrench opening 36 type label Typ dimension "A" dimension "B" cable length MMG 1070/1 TS 3m 193 mm 0 mm 3m
Printed in Germany. Due to continued research and product development
MMG 1070/2 TS 3m 291 mm 100 mm 3m wrench opening 19 MMG 1070/3 TS 3m 421 mm 204 mm 3m
epro reserves the right to change these specifications without notice.
MMG 1070/4 TS 3m 127 mm 0 mm 3m junction thread PG 9 MMG 1070/1 TS 10m 193 mm 0 mm 10 m MMG 1070/2 TS 10m 291 mm 100 mm 10 m MMG 1070/4 TS 10m 127 mm 0 mm 10 m connection cable
Fig. 2 all dimensions in [mm]
Order codes: MMG 1070/1 TS 3m Eddy current displacement sensor with 3 m cable................................................... 9200 – 00022 MMG 1070/2 TS 3m Eddy current displacement sensor with 3 m cable................................................... 9200 – 00023 MMG 1070/3 TS 3m Eddy current displacement sensor with 3 m cable................................................... 9200 – 00024 MMG 1070/4 TS 3m Eddy current displacement sensor with 3 m cable................................................... 9200 – 00034 6040 – 00009 06/05 Reh
MMG 1070/1 TS 10 m Eddy current displacement sensor with 10 m cable................................................. 9200 – 00036 MMG 1070/2 TS 10 m Eddy current displacement sensor with 10 m cable................................................. 9200 – 00035 MMG 1070/4 TS 10 m Eddy current displacement sensor with 10 m cable................................................. 9200 – 00025
