FK-POS80 User's Manual

1. Printer appearance and components 2. Printer Connection

To ensure the printer and PC is

Power switch Mouth of paper out powered off

Cover of cutter Cover of paper warehouse Insert the matched data connection
Paper cover's opening button Bottom of printer lines to the interface(USB/Parallel/Serial)
Paper feeling button Cover of DIP switch of the printer, the other ends are to the PC.
Indicators(Power/Error/Paper) Power & Communication ports Connect to the supplied power adapter.

3. Load the Paper Roll 4. Load the Paper Roll

The printer has a cash drawer driver interface and many kinds of
Power off the Printer. Slide or press paper roll storehouse botton. communication interfaces: parallel, serial (RS-232), USB and
Open the top cover of printer. Ethernet ports. USB port and cash drawer interfaces are standard
interfaces, and it has Ethernet, serial and parallel ports as
Press down optional. Different interfaces depending on the specific model.
Push forward

Cash

Cash drawer

Load the thermal paper into printer as the following picture:

PC

USB

Paper roll loading direction

PC
Be careful of
the saw blade

Pull a part of paper out and then closed the storehouse cover. Serial

PC

Parallel

Use the cutter of printer to tear off the extra pater. The status
after paper loading.
Ethernet
Wifi/Bluetooth

Switch router

Shanghai Fukun Electronics Co.,Ltd Web:www.fukun-tech.com

5. Driver installation 7. IP address setting
The printer's Ethernet IP address can be set directly via printer inserted web
setting page.
Insert the CD
into your Connect printer and PC in a same Ethernet LAN.
Turn on the computer's
printer power CD-ROM Please visite address "http://printer 192.168.1.87" (e.g.: the"192.168.1.87",
switch drive
is factory IP address), then press Enter key, open Ethernet port setting
page in browser as below:

The printer CD has Windows driver procedure, the position is:

Drivers\Windows File.
Right click"Driver setup.exe",and run as administer.( (Double click to
run in XP system,and it needs administrator to run in WIN7/WIN8).

Open

Run as administrator

3 Click "Configure Interface" link in the left side, then enter the modified
target IP and click "save" button to save setting. Click "Reboot" button
Choose language as "Enclish" click "next",and choose printer to
to reset printer if you want the setting to take effect.
connect PC port click "next".
If you want to know the printer's current settings and parameters, Please
FK80 Printer Driver Install
4
FK80 Printer Driver Install click “ Printer Test Page” button to print self-test page, and check the IP
FK80 Printer Driver Install
Address contents in the self-test page is right or not.
Cable network-use cable connect
Cable network-use cable the printer
connect toprinter
the your network
to your network

Chinese USB -useUSB

USB-use
cable to connect
USB cable to the printer
connect toprinter
the your computer
to your computer

English A serial port-use

A serial port-use a seriala serial port cable,connect
port cable,connect thethe printerto
printer to your
your computer
computer

Parallel port-use parallel cable to connect the printer to your computer

8. Fix the Paper Jam

!
Welcome Next Welcome Prev Next
Welcome Prev Next Warning: Do not open the paper roll warehouse cover forcibly
when you cannot open it normally if it is paper jam, which to
avoid damaging the printer.
Then it will show"Printer was created successfully"
Take off the cutter adjusting cover
in vertical direction as photo. Cover of Cutter

Adjust paper-cutter to make

the cutter set back to print
mechanism completely as
photo direction
Open paper cover and
Finish
eliminate paper jam.
Install cutter adjusting cover Cutter's adjuster
vertically down.
5 Re-loading paper, close the
paper cover and then power on.
5. Driver installation
DIP switch
Switch Function On Off Default
Cutter
Buzzer
Forbidden
Enable
Enable
Forbidden
Off
On
9. Content in the package
Printing density Dark Light Off
Multi-byte encoding Single-byte multi-byte
Off
encoding encoding
Max. number of Printing
characters in each line 42 48 Off

Cash drawer Enable Forbidden On Printer Power supplier Power cord

Off
Baud rate options (bps) Ref. Chart 1
Off
Quick
Installation
Chart 1 Baud rate options and Use
Guide

Baud rate Switch 7 Switch 8 Default

On Off Communication cable Paper roll CD Quick installation
Off Off (USB;serial; parallel optional) and Use Guide
On On
Please check the parts when opening the box,if ther is something missed,please
Off On
contact with the supplier or the manufacturer.

Shanghai Fukun Electronics Co.,Ltd Web:www.fukun-tech.com