Grade 7 Computer

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Republic of the Philippines

Department of Education
PINILI INSTITUTE
Pinili, Ilocos Norte
COMPUTER 7
Name:_____________________________________________ Year and Section: Grade 7 Tulip/Rose
I. Multiple choice: Choose the best answer. Write your answer before the number.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-Static mat b. Hex driver c. Philips head screwdriver d. Wire Cutter
2. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens
screws?
a. Anti-static mat b. Hex Driver c. Philips head screwdriver d. Wire Cutter
3. Turn the screwdriver _________ to tighten the screw.
a. Clockwise b. Counter clockwise c. Upward d. Downward
4. A magnetic storage device that is installed inside the computer.
a. Flash Drive b. Hard Drive c. Floppy Drive d. Optical Drive
5. A storage device that uses lasers to read data on the optical media.
a. Flash Drive b. Hard Drive c. Floppy Drive d. Optical Drive
6. PPE stands for ________________.
a. Personal Protective Equipment c. People Performance Equipment
b. People Protective Equipment d. Personal Performance Equipment
7. Which of the following is the most effective method of control?
a. Elimination b. Substitution c. Education and training d. Good Housekeeping
8. It is the the physical, touchable, electronic and mechanical parts of a computer system.
a. Hardware b. Software c. Peopleware d. None of the above
9. It is the main part of a microcomputer, sometimes called the chassis.
a. Motherboard b. System Unit c. CPU d. RAM
10. It contains all the circuits and components that run the computer.
a. Motherboard b. System Unit c. CPU d. RAM
11. Which of the following hardware component that perform all of the instructions and calculations?
a. Motherboard b. System Unit c. CPU d. RAM
12. CPU stands for ____________________________.
a. Central Processing Unit b. Central Processor Unit c. Centralized Processor Unit d. Central Processing Unite
13. It is a type of memory that can hold data even when the power is ON or OFF.
a. CPU b. ROM c. both a and b d. None of the above
14. ________________ is sometimes called interface cards.
a. CPU b. Expansion Bus c. Adapters d. RAM
15. Which of the following accepts data and instructions from the user or from another computer system.
a. Input Devices b. Output devices c. Voice-input d. None of the above
16. Which of the following is considered as primary input device?
a. Mouse b. Monitor c. Keyboard d. Speakers
17. Which of the following is the most common pointing device?
a. Touch screen b. Mouse c. Light pen d. None of the above
18. It is piece of computer hardware that displays results after the computer has processed the input data that has been
entered.
a. Input Devices b. Output Devices c. Voice input d. None of the above
19. ___________ is used to play sound.
a. Speakers b. RAM c. CPU d. Monitor
20. Which of the following type of port used to connect monitors?
a. Serial Port b. Parallel Port c. VGA d. PS/2
II. Essay. In not more than ten(10) sentences, write some advantages of technology. (10 points)

You might also like