DRAWING NUMBER

02-556-376
NPI OR ECN NO
ECN000574
2X .75 [19.1]
PORT LOCATION

.370 .010 .421 .005

[9.40 .25] [10.69 .12]

PART NUMBER AND DATE CODE STAMPED

ON COVER IN THIS APPROXIMATE AREA 2X BRAKE RELEASE PORTS
#4 SAE O-RING PORTS
PER SAE J1926/1: 7/16-20
(1) PRESSURE PORT 2X 3.33
R.060 .005 OR 45 $ CHAM. (1) BLEEDER PORT [84.6]
[1.52 .12] (120 $ APART)

+.007
R.023
-.008

1.00 [25.4]
MIN. FULL SPLINE
[.58
+.17
-.20 ] 30 $ 1 $
(TYP.)

.77
[19.5]

CL 6.96
[176.8]
3.999 .001
[101.57 .02]
4.003 .002
[101.68 .05]
CL
(AS CAST)

2X .531 .005 x THRU

[13.49 .12]
.135 .005 X 45 $
MOUNTING HOLES
[3.43 .12]

R.025 .010
[.64 .25]

30 $ INVOLUTE SPLINE-EXTERNAL
13 TOOTH 16/32 PITCH
FLAT ROOT, SIDE FIT, CLASS 5 CL CL 30 $ INVOLUTE SPLINE-INTERNAL
13 TOOTH 16/32 PITCH
PER ANSI B92. 1-1970 .95 FLAT ROOT, SIDE FIT, CLASS 7
[24.2] PER ANSI B92. 1-1970
2.875 .005
[73.03 .12]
1.62 2.29
[41.1] [58.1]
5.750 .010
[146.05 .25]
3.22
[81.9]

NOTES:
1. FOR USE WITH MINERAL BASE HYDRAULIC OIL ONLY
2. DIMENSIONS MAY VARY BETWEEN UNITS AND ARE FOR REFERENCE PURPOSES ONLY
MILLIMETER VALUES MAY NOT BE AN EXACT CONVERSION OF INCH VALUES
3. LINING REPAIR KIT P/N 20-060-107
4. BEARING REPAIR KIT P/N 02-500-142
5. O-RING REPAIR KIT P/N 02-500-141
6. SPRING REPAIR KIT P/N 12-501-515

SPECIFICATIONS:
TYPE: DRY MULTIPLE DISC BRAKE, SPRING APPLY, HYDRAULIC RELEASE

MAXIMUM SPEED: 4,000 RPM SHAFT SPEED CAPABILITY SPECIFIED IS

FOR BRAKE IN RELEASED CONDITION. ENERGY ABSORPTION
DURING APPLY CYCLE MUST BE CAREFULLY EXAMINED
FOR EACH APPLICATION.
INCH
[MILLIMETER] R

TORQUE RATING: 4,000 LBIN STATIC (BREAKAWAY)

ACTUAL TORQUE MAY VARY BY UP TO 10% DUE TO MANUFACTURING TOLERANCES.

North Mankato, Minnesota USA

RELEASE PRESSURE: 220 PSI INITIAL, 260 PSI FULL
& 3,000 PSI MAX.

LINING MATERIAL: SINTERED BRONZE SCALE TITLE LMB-131340-B

COMPONENT AND SYSTEM RECOMMENDATIONS MADE BY MICO, MICO, INC CLAIMS PROPRIETARY RIGHTS TO
INC ARE BASED ON INFORMATION SUPPLIED BY POTENTIAL THE MATERIAL DISCLOSED IN THIS DOCUMENT.
0.500 MULTIPLE DISC BRAKE
VOLUME OF OIL REQUIRED: 0.5 IN³ MIN., 0.9 IN³ MAX.
USER AND/OR SYSTEM DESIGNER. THE POTENTIAL USER AND/OR THIS DOCUMENT IS PROVIDED IN CONFIDENCE DWN SHYPO APVD PROD ENGRG SIZE DRAWING NUMBER REV
TO RELEASE BRAKE
DESIGNER MUST MAKE FINAL ACCEPTANCE AND APPROVAL OF AND MAY NOT BE REPRODUCED OR DISCLOSED
2014-08-06 PJS 2014-12-30
02-556-376 H
APPROXIMATE WEIGHT: 23 LB COMPONENTS AND SYSTEM AFTER TESTING PERFORMANCE ON WITHOUT WRITTEN PERMISSION FROM MICO, INC. X NO APVD ENGRG B 1
AN ACTUAL APPLICATION FOR WHICH SYSTEM WAS DESIGNED. COPYRIGHT MICO, INC. ALL RIGHTS RESERVED. RV 09-17-2014 CUSTOMER COPY
01-JAN-2012