TDS Aropol Is 4650
TDS Aropol Is 4650
TDS Aropol Is 4650
Technical Datasheet
AROPOL IS 4650 is a medium viscosity, medium reactivity, Isophthalic based resin with good
mechanical properties combined with high temperature resistance. This resin is classifies as UP 2 A
following the EN-13121-1.
Application and use AROPOL IS 4650 resin is suitable for Filament winding and production of high quality laminates,
surface linings or other composites exposed to a corrosive environment and for production of
composites where good mechanical properties are important.
AROPOL IS 4650 resin is used manufacturing a variety of products like, water equipment, silos,
shunt boxes, protecting plaques, vessels, pipes, protecting screens, ship equipments, etc.
INEOS Composites is committed to the continuous evolution of technology and service solutions that promote health, safety and environmental protection around the world.
® Registered trademark and ™ trademark INEOS Composites
Document 2745 V2 F2, Language EN V1,Approved 2022-02-01, © 2022 INEOS Page 2 (2)
Technical Datasheet
Handling and Storage It is highly recommended that all material is stored at stable temperatures under 25°C preferably
indoors, and away from direct sunlight. Prolonged storage outside of recommended conditions can
influence liquid resin properties like viscosity and gel time. It is also strongly recommended to mix
resin thoroughly before use. Shelf life of AROPOL IS 4650 resin is six (6) months.
Notice All information presented herein is believed to be accurate and reliable, and is solely for the user's
consideration, investigation and verification. The information is not to be taken as an express or
implied representation or warranty for which INEOS Composites assumes legal responsibility. Any
warranties, including warranties of merchantability, fitness for use or non-infringement of
intellectual property rights of third parties, are herewith expressly excluded.
Since the user's product formulations, specific use applications and conditions of use are beyond
the control of INEOS Composites, INEOS Composites makes no warranty or representation
regarding the results which may be obtained by the user. It shall be the sole responsibility of the
user to determine the suitability of any of the products mentioned for the user's specific
application.
INEOS Composites requests that the user reads, understands and complies with the information
contained herein and the current Material Safety Data Sheet.
INEOS Composites is committed to the continuous evolution of technology and service solutions that promote health, safety and environmental protection around the world.
® Registered trademark and ™ trademark INEOS Composites