Scribd Logo
Upload

Welcome to Scribd!

  • 77 views

    Konica-Minolta-spectrometer 2012 FD5BT

    Uploaded by

    bill posters

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Konica-Minolta-spectrometer 2012 FD5BT

    Uploaded by

    bill posters
    77 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    77 views2 pages

    Konica-Minolta-spectrometer 2012 FD5BT

    Uploaded by

    bill posters

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    NEW

    Spectrodensitometer FD-5BT

    An innovative instrument for


    the color calibration, control
    and management of printers
    The Spectrodensitometer FD-5BT is equipped with new
    optical technology that not only offers high accuracy
    but also leaps ahead of competitors by offering M1
    (D50) measurement conditions, providing results
    that correlate closely with visual evaluation.

    Excellent product performance


    Demands for high image quality and definition continues to increase in commercial printing.
    The FD-5BT provides the constant readings and the minimized deviation among the multiple
    units needed to achieve high color reproducibility.

    Repeatability : Within E00 0.05


    Inter-instrument agreement : Within E00 0.3

    Greatly reduces differences between visual and


    instrumental evaluation
    One possible cause of differences between the results of visual evaluation and instrumental evaluation is differences
    between the illumination used for visual evaluation and the illumination used by the instrument for evaluation.
    The FD-5 can provide measurement results under various illuminants and measurement conditions. It even offers
    Measurement Condition M1 (D50), which is recommended in ISO 13655 (Graphic technology - Spectral measurement
    and colorimetric computation for graphic arts images) as being closest to visual evaluation.
    Example of differences in Color difference under Color difference
    evaluation conditions Illuminant D50 (Daylight) under Illuminant A
    (Incandescent lamp)
    Sample A Sample A' Sample A Sample A'

    Our bags are Huh?


    The colors are
    the same different now.
    color!

    L* = 50.93 L* = 50.93 L* = 50.94 L* = 53.95


    a* = 4.54 a* = 4.54 a* = 3.42 a* = 10.80
    b* = -5.12 b* = -5.12 b* = -5.60 b* = -2.00
    ⊿ E*ab = 0 ⊿ E*ab = 8.71

    Robust design
    Long-life LED
    • Until now, wavelength compensation could only be carried out as one part Wavelength-direction shift lamp light
    Spectral reflectance

    of manufacturer servicing.This task is now performed whenever white


    source
    calibration is done, helping to maintain the high reliability of measurement
    values until the next periodic servicing.
    • Compared to conventional instruments, which use tungsten lamps as a light
    source and may be subject to repeatability issues related to temperature
    drift, the LED illumination technology of the new FD-5BT offer an almost
    infinite lifetime and unprecedented repeatability levels for a handheld
    spectrodensitometer. Wavelength
    SYSTEM DIAGRAM DIMENSIONS (Units: mm)
    With removable target mask attached
    AC Adapter∗1
    Spectrodensitometer 171.5 90
    FD-5 USB Cable∗1 165 70
    IF-A17 (Europe)
    IF-A23 (worldwide except Europe)

    ∗1 Shape may vary by region.

    84.2
    Protection
    Glass
    FD-A04

    White Target Mask Ruler Soft Case


    Calibration Plate FD-A01 FD-A02 FD-A05
    FD-A06
    25 φ6.2
    Standard accessories

    Main specifications
    Model FD-5BT
    45°a: 0°(annular illumination)*1
    Illumination/viewing system
    Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reflectance measurements.
    Spectral separation device Concave grating
    Wavelength range Spectral reflectance: 380 to 730 nm
    Wavelength pitch 10 nm
    Half bandwidth Approx. 10 nm
    Measurement area Ø3.5mm
    Light source LED
    Measurement range Density: 0.0D to 2.5D; Reflectance: 0 to 150%
    Density: σ0.01D
    Short-term repeatability
    Colorimetric: Within σ⊿E00 0.05 (When white plate is measured 30 times at 10-second intervals after white calibration has been performed)
    Within ⊿ E00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard
    Inter-instrument agreement
    conditions)
    Measurement time Approx. 1.4 s
    Displayed values Colorimetric values, color-difference values, density values, density-difference values, dot area ratio, dot gain, PASS/FAIL judgment
    Corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A), M1 (CIE Illuminant D50), and M2 (illumination with UV-cut filter); User-
    Measurement conditions
    defined illuminant
    Illuminants A, C, D50, D65, ID50, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-defined illuminant
    Observers 2° Standard Observer, 10° Standard Observer
    Color spaces L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ and color-difference in these color spaces
    Color-difference equations ⊿ E*ab (CIE 1976), ⊿ E*94 (CIE 1994), ⊿ E00 (CIE 2000), ⊿ E (Hunter), CMC (l:c)
    Indexes WI (ASTM E313-96); Tint (ASTM E313-96); ISO Brightness (ISO 2470-1); D65 Brightness (ISO 2470-2); Fluorescence index
    Density ISO Status T, ISO Status E, ISO Status A, ISO Status I; DIN16536
    Storable data Colorimetric target data: 30 data; Density target data: 30 data
    Display language English, French, German, Spanish, Japanese, Chinese (Simplified)
    Interface USB 2.0
    Output data*2 Displayed values
    Power Rechargeable internal lithium-ion battery (Number of measurements per charge: Approx. 2,000 when new); AC adapter; USB bus power
    Dimensions (W × D × H) 70 × 165 × 83mm (Body only); 90 × 172 × 84mm (With target mask attached)
    Weight Approx. 350g (Body only); Approx. 430g (With target mask attached)
    Operating temperature/
    10 to 35°C, 30 to 85% relative humidity with no condensation
    humidity range
    Storage temperature/humidity
    0 to 45°C, 0 to 85% relative humidity with no condensation
    range
    *1 Illumination for wavelengths under 400nm is unidirectional. *2 Available when using PC software.
    • Displays shown are for illustration purpose only.

    SAFETY PRECAUTIONS • KONICA MINOLTA and the Konica Minolta logo and
    the symbol mark, and "The essentials of imaging"
    are registered trademarks or trademarks of KONICA
    For correct use and for your safety, be sure to read the instruction
    MINOLTA HOLDINGS, INC.
    manual before using the instrument. • The specifications and drawings given here are
    • Always connect the instrument to the specified power supply subject to change without prior notice.
    voltage. Improper connection may cause a fire or electric shock. Certificate No : LRQ 0960094/A Certificate No : JQA-E-80027
    Registration Date : March 3, 1995 Registration Date : March 12, 1997

    ©2012 KONICA MINOLTA OPTICS, INC.

    You might also like