A6V10062647 en

Sinteso™
Fire control panel

FC2020
Compact, pre-assembled fire control panel with integrated, user-friendly

operating unit.
● Fire control panel for a maximum of 252 addresses
● Optional, integrated single-sector extinguishing
● Can be used as a standalone version or networked with up to 64 stations, such as
control panels and terminals
● Redundant network node with degraded mode operation according to EN 54
● Option to connect to Siemens 'Cloud for Buildings'
● Emergency power supply for emergency operating time of up to 72 hours
● Recognition, automatic read-in and immediate operational readiness of all FDnet
devices with auto-configuration
● Flexible configuration of complex applications and controls
● Configuration data can be uploaded/downloaded via remote access
● Time and situation-dependent changeover of detector parameter sets
● Extensions: Printer, key switches, LED indicators
009383_v_en_-- Smart Infrastructure

2021-10-22
Features and Functions
System
The diagrams have been simplified and do not include additional network hardware or
security components. Permissible applications are described in the A6V101039125
Network Security Guidelines document. Contact your Siemens IT security expert for more
information.
System overview
Fig. 1: System overview
2
Smart Infrastructure 009383_v_en_--
2021-10-22
1 Remote access with SintesoView/ Sinteso Touch
2 FS cloud applications
3 Customer network
4 Management platform
5 Remote access to management platform
6 Remote access with Sinteso Mobile
7 Router + firewall + virtual private network
8 Fire damper with actuator
Transmission of a fault signal
Transmission of an alarm signal
You will find a detailed labeled version of the diagram above along with further information in
the A6V10906627 planning guide, see chapter 'Product documentation'.
3
2021-10-22
Networking of fire control panels
The diagrams have been simplified and do not include additional network hardware or
security components. Permissible applications are described in the A6V101039125
Network Security Guidelines document. Contact your Siemens IT security expert for more
information.
Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet
network is connected to a danger management system via BACnet, up to 16 control panels
and terminals can be networked.
Fig. 2: Sub-net
An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated

in one network. A maximum of 64 stations is supported in total.
4
2021-10-22
Fig. 3: Backbone
1 Remote access with SintesoView/ Sinteso Touch
2 FS cloud applications
3 Customer network
6 Remote access with Sinteso Mobile
7 Router + firewall + virtual private network
You will find a detailed labeled version of the diagram above along with further information in
the A6V10906627 planning guide, see chapter 'Product documentation'.
5
2021-10-22
Control panels
General features and functions

● Fast Ethernet interface for a heterogeneous network
● Processes the signals of the Sinteso detector series FD20
● Floor repeater displays, terminals and alarm devices on the FDnet detector line with
power supply via FDnet
● Interface to Siemens danger management system
● Slots for RS232 and RS485 serial interfaces
● All detector lines are monitored for ground faults
● Integrated degraded mode function
● Freely configurable, time-dependent controls with optional weekly, monthly, and yearly
switching programs
● Time and situation-dependent changeover of detector parameter sets
● Controls for synchronous activation of sounder bases/sounders (acoustic, optical,
language)
● The control panel and the fire detection system are custom-configured using the
'SintesoWorks' software
● Firmware for all processor-controlled control panel components can be updated
● Customer texts can be adapted directly on the operating unit of the control panel or with
the 'SintesoWorks' software
● Up to 13000 events can be called up from the event memory and filtered based on
various criteria
● Automatic summer/normal time changeover
Control panel-specific features
From MP8, the fire control panels can be ordered with a periphery board with a 0.5 A or
1.5 A output current per FDnet line.
To convert existing fire control panels, the periphery board with 1.5 A per FDnet line can be
ordered separately.
You will find information on the integrated extinguishing system and the individual
extinguishing components that are available in a separate data sheet with the document ID
'A6V10880701'.
FC2020-AZ Housing (Standard)
Detector line (FDnet)

● 252 addresses
● 2 loops/4 stubs
Properties
● Operating unit
● 70 W power supply
● Max. battery capacity 12 Ah
Options of the operating unit
● Event printer FTO2001-A1
● Key switch (Kaba) FTO2005-C1
● Key switch (nordic) FTO2006-B1
6
2021-10-22
FC2020-EZ Housing (Standard)

● 252 addresses
● 2 loops/4 stubs
Properties
● Operating unit (+LED indicator)
FC2020-AA Housing (Comfort)

● 252 addresses
● 2 loops / 4 stubs
Properties
● Operating unit
● Operating add-on (empty)
● 1 flooding zone (optional)
● Operating add-on (2xLED indicator) FCM2038-A2
● Operating add-on (4xLED indicator) FCM2036-A2
● Exting. terminal (1 sector) XCM2002-A2
FC2020-AE Housing (Comfort)

● 252 addresses
● 2 loops/4 stubs
Properties
● Operating unit
● Operating add-on (2xLED indicator)
7
2021-10-22
Extensions
'A6V10880701'.
FCM2036-A2 Operating add-on (4xLED indicator)
● Optional operating add-ons with 96 indicator groups and two LEDs each:
1x red/green LED and 1x yellow LED
FCM2038-A2 Operating add-on (2xLED indicator)
● Optional operating add-ons with 48 indicator groups and two LEDs each:
1x red/green LED and 1x yellow LED
FH2002-A1 Housing (Standard)
● Empty housing for free use

● 430 x 398 x 165 mm
● E.g., for extra batteries, operating add-ons, or event printers
● Space for the following battery configuration:
– 2x FA2004-A1 (12 Ah)
FH2003-A1 Housing (Comfort)

● 430 x 796 x 165 mm
● Space for the following battery configurations:
– 2x FA2005-A1 (17 Ah) or
– 2x BAT12-25 (25 Ah)
● The mounting kit for the batteries FHA2061-A1 must be ordered separately.
8
2021-10-22
FH2004-A1 Housing (Large Extension)

● 430 x 398 x 265 mm
● E.g., for extra batteries, operating add-ons, or event printer
– 2x FA2007-A1 (45 Ah) or
– 2x FA2008-A1 (65 Ah)
FH2005-A1 Housing (Large)

● 430 x 796 x 265 mm
– 2x BAT12-25 (25 Ah) or
– 2x FA2007-A1 (45 Ah) or
– 2x FA2008-A1 (65 Ah)
FH2007-A1 Housing (Standard + plan compartment)
● Empty housing for A4 documents

● 430 x 398 x 165 mm
● Depth 150 mm
FTO2001-A1 Event printer
● Thermal printer for installation in operating units or operating add-ons

● Can be controlled via the RS232 module FCA2001-A1 (order separately)
● Logs all important events, such as alarms, faults, isolations, and test functions
9
2021-10-22
DL3750+ Matrix printer (external)
● External matrix printer recommended by Siemens

● Supports monitoring for printing faults
● Can be controlled via the RS232 module FCA2001-A1 (order separately)
● Can be controlled via Ethernet via the print server PS104 from SEH
Use
For smaller-scale applications, e.g., workshops or hotels.
Also suitable for more comprehensive systems thanks to flexible networking options.
10
2021-10-22
Design
Function elements
Operating unit
The following elements are available on the operating unit:
● CPU module and electronics
● Ethernet connection
● Slots for RS232 and RS485 modules and network modules (SAFEDLINK)
● Space for 'Kaba' or 'nordic' key switch
● Space for event printer (depending on version)
● Peripheral data bus connection for optional LED modules
Periphery board
From MP8, the fire control panels can be ordered with a periphery board with a 0.5 A or
1.5 A output current per FDnet line.
To convert existing fire control panels, the periphery board with 1.5 A per FDnet line can be
ordered separately.
The following elements are available on the periphery board:

● Connection terminals for:
– FDnet lines
– Remote transmission (alarm, fault)
– Horn output
– Configurable control inputs and outputs
– Monitored alarm and fault output
– Power supply and emergency supply
● 1x slot for loop extension (FDnet)
70 W or 150 W power supply, emergency power supply

The power supply feeds the hardware and charges the batteries.
In the event of a power cut, the batteries provide emergency current.
Housing
An FHA2007-A1 pivoting mounting plate can be fitted for the following elements above the
periphery board on the rear housing panel:
● 1x fire brigade periphery module (for Germany)
● 1x sounder module (as an alternative to mounting on U-rail TS35)
● 1x Connect X200 Gateway
Configuration
The following software allows the system to be customized:
● SintesoWorks
Operation
Each control unit has an integrated operating unit. The control panel can also be operated
via a separate FT2040 or FT2080 (Touch) fire terminal.
You will find details and more information in the product data sheet 009386 or
A6V10378271.
11
2021-10-22
Setup
FC2020 inside housing (Standard)
Fig. 4: FC2020 Standard
Position Designation Type Comment
Basic equipment
1 Housing (Standard) FHA2002-A1 Items 1-5: Basic equipment for each

FC2020-xx in housing (Standard).
2 Periphery board (2 loops) FCI2002-A1 The periphery board (2 loops, P) can
be ordered separately to convert the
Periphery board (2 loops, P) FCI2023-A1 station to the 1.5 A FDnet line.
3 Power supply (70 W) FP2015-A1
4 Mains terminals on TS35 DIN rail - Space for socket, relay modules, etc.
5 Operating unit FCM20xx-xx Operating unit with CPU
6 Space for batteries - 2x 12 V, 12 Ah
12
2021-10-22
Extensions
7 Relay module Z3B171 Relay for fire controls
8 Event printer FTO2001-A1 For logging events
9 Key switch (Kaba) FTO2005-C1 For operating access authorization
Key switch (nordic) FTO2006-B1
10 Mounting plate FHA2007-A1 e.g., for fire brigade periphery module

or Connect X200 Gateway
11 Loop extension (FDnet) FCI2003-A1 For loop extension of the periphery

board (2 loops) FCI2002-A1 from two
to four loops, number of addresses
remains the same
Loop extension (FDnet/C-NET, P) FCI2025-A1 For loop extension of the periphery

board (2 loops, P) FCI2023-A1 from
two to four loops, number of
addresses remains the same.
12 RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485

interface
13 RS232 module (isolated) FCA2001-A1 For devices with an RS232 interface
14 Network module (SAFEDLINK) FN2001-A1 For networking several stations
15 Connect X200 Gateway CXG3.X200 For connecting an FS20 station to

Cloud for Buildings
The mounting plate FHA2007-A1 and
the accessory set + ACDC (X200)
FCA2056-A1 must be ordered
separately.
16 Sounder module FCA2005-A1 For splitting one conventional sounder

into four
17 Battery (12 V, 12 Ah, VdS) FA2004-A1 For the emergency power supply
18 Fire brigade periphery module FCI2001-D1 For Germany (FBF, FSD, ÜE, FSE,
ÖA, KL)
19 19" mounting kit FHA2016-A1 For installation in 19" third-party

housing
20 FM blind 1HE FHA2017-A1 For recessed mounting of housing
21 License key Sx FCA20xx For special functions
22 Cable kit (communication) FCA2014-A1 For flexible connections running to the

modules on the operating unit
Repeater (SAFEDLINK) FN2002-A1 Not in overview, as not an installation

part.
For extending the system bus FCnet
from 1000 m to 2000 m between two
stations. Max. 1x repeater
(SAFEDLINK) between two stations.
13
2021-10-22
FC2020 inside housing (Comfort)
Fig. 5: FC2020 Comfort
Basic equipment
1 Housing (Comfort) FHA2003-A1 Items 1-5: Basic equipment for each

FC2020-xx in housing (Comfort).
2 Periphery board (2 loops) FCI2002-A1 The periphery board (2 loops, P) can
be ordered separately to convert the
Periphery board (2 loops, P) FCI2023-A1 station to the 1.5 A FDnet line.
3 Power supply (SV 24 V-150 W) V24230-Z6-A5
4 Mains terminals on TS35 DIN rail - Space for socket, relay modules, etc.
5 Operating unit FCM20xx-xx Operating unit with CPU
6 Space for batteries - 2x 12 V, 25 Ah
Extensions
7 Relay module Z3B171 Relay for fire controls
8 Event printer FTO2001-A1 For logging events
9 Key switch (Kaba) FTO2005-C1 For operating access authorization
Key switch (nordic) FTO2006-B1
14
2021-10-22
10 Mounting plate FHA2007-A1 E.g., for fire brigade periphery module

or Connect X200 Gateway
11 Loop extension (FDnet) FCI2003-A1 For loop extension of the periphery

board (2 loops) FCI2002-A1 from two
to four loops, number of addresses
remains the same
Loop extension (FDnet/C-NET, P) FCI2025-A1 For loop extension of the periphery

board (2 loops, P) FCI2023-A1 from
two to four loops, number of
addresses remains the same.
12 RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485

interface
13 RS232 module (isolated) FCA2001-A1 For devices with an RS232 interface
14 Network module (SAFEDLINK) FN2001-A1 For networking several stations
15 Connect X200 Gateway and CXG3.X200 For connecting an FS20 station to

mounting plate (X200) FHA2063-A1 Cloud for Buildings
The mounting plate FHA2007-A1 and
the accessory set + ACDC (X200)
FCA2056-A1 or
the mounting plate (X200) FHA2063-
A1 and the accessory set + ACDC
(X200) FCA2056-A1 must be ordered
separately.
16 Sounder module FCA2005-A1 For splitting one conventional sounder

into four
17 Battery (12 V, 25 Ah, VdS) BAT12-25 For the emergency power supply
18 Fire brigade periphery module FCI2001-D1 For Germany (FBF, FSD, ÜE, FSE,
ÖA, KL)
19 19" mounting kit FHA2016-A1 For installation in 19" third-party

housing
20 FM blind 2HE FHA2015-A1 For recessed mounting of housing
21 License key Sx FCA2xx For special functions
22 Cable kit (communication) FCA2014-A1 For flexible connections running to the

modules on the operating unit
23 Power supply kit (150 W, B) FP2005-A1 For extra power supply
Repeater (SAFEDLINK) FN2002-A1 Not in overview, as not an installation

part.
For extending the system bus FCnet
from 1000 m to 2000 m between two
stations. Max. 1x repeater
(SAFEDLINK) between two stations.
15
2021-10-22
Type Overview
Housing (Standard) Housing (Comfort)
Type FC2020-AZ FC2020-EZ FC2020-AA FC2020-AE
Number of FDnet 252

addresses
Number of lines:
Loops 2 (4)
(with loop
extension) or
Stubs 4 (8)
(with loop
extension)
Power supply 70 W 150 W
Battery size 12 Ah 25 Ah
Indicator groups - 24 - 48
with one
red/green and
one yellow LED
each
16
2021-10-22
Details for ordering
Control panels
Type Designation Weight Order number
FC2020-AZ Fire control panel (2-loop) 8.537 kg A5Q00015550
FC2020-AZ Fire control panel (2 loops, P) 8.600 kg S54400-C33-A1
FC2020-EZ Fire control panel (2-loop) 8.657 kg A5Q00016827
FC2020-AA Fire control panel (2-loop) 14.869 kg A5Q00016829
FC2020-AA Fire control panel (2 loops, P) 14.928 kg S54400-C33-A6
FC2020-AE Fire control panel (2-loop) 15.124 kg A5Q00016851
Extensions
'A6V10880701'.
FCA2001-A1 RS232 module (isolated) 0.033 kg A5Q00005327
FCA2002-A1 RS485 module (isolated) 0.027 kg A5Q00009923
FCA2005-A1 Sounder module 0.100 kg A5Q00014866
FCA2014-A1 Cable kit (communication) 0.126 kg A5Q00023027
FCI2001-D1 Fire brigade periphery module 0.207 kg A5Q00013100
FCI2003-A1 Loop extension (FDnet) 0.030 kg A5Q00010136
FCI2023-A1 Periphery board (2-Loop, P) 0.119 kg S54400-A183-A1
FCI2025-A1 Loop extension (FDnet/C-NET, P) 0.030 kg S54400-A185-A1
FCM2036-A2 Operating add-on (4xLED indicator) 3.905 kg S54400-B147-A1
FCM2038-A2 Operating add-on (2xLED indicator) 2.516 kg S54400-B146-A1
FH2002-A1 Housing (Standard) 7.193 kg A5Q00018931
FH2003-A1 Housing (Comfort) 11.051 kg A5Q00009906
FH2004-A1 Housing (Large Extension) 11.367 kg A5Q00018778
FH2005-A1 Housing (Large) 17.900 kg A5Q00019543
FH2007-A1 Housing (Standard + plan 9.430 kg A5Q00022369

compartment)
FHA2007-A1 Mounting plate 0.800 kg A5Q00010151
17
2021-10-22
FHA2015-A1 FM blind 2HE 5.050 kg A5Q00024621
FHA2016-A1 19" mounting kit 3.000 kg A5Q00020179
FHA2017-A1 FM blind 1HE 3.020 kg A5Q00024719
FN2001-A1 Network module (SAFEDLINK) 0.022 kg A5Q00012851
FN2002-A1 Repeater (SAFEDLINK) 0.105 kg S24236-B2502-A1
FN2006-A1 Fiber network module (SM) 0.792 kg S54400-A109-A1
FN2007-A1 Fiber network module (MM) 0.792 kg S54400-A110-A1
FTO2001-A1 Event printer 0.141 kg A5Q00010126
- Spare printer reels (10 reels) 0.090 kg A5Q00017619
FTO2005-C1 Key switch (Kaba) 0.083 kg A5Q00010113
FTO2006-B1 Key switch (nordic) 0.046 kg A5Q00010129
Z3B171 Relay module 250 V AC / 10 A 0.042 kg 4843830001

(1 relay)
Auxiliary power supply
FP2004-A1 Power supply kit (150 W, A) for EN- 1.286 kg A5Q00020825

compliant installation in empty
housing
FP2005-A1 Power supply kit (150 W, B) for 1.181 kg A5Q00018779

extension
FP2015-A1 Power supply (70 W) for EN- 1.300 kg S54400-B121-A1

compliant installation in empty
housing
Network (backbone)
FCA2031-A1 Connection module (MoNet) 0.081 kg S54400-A153-A1

incl. cable
FHA2029-A1 Mounting kit (switch) 1.261 kg S54400-B79-A1
FN2012-A1 Ethernet switch (modular) 0.600 kg S54400-B152-A1
VN2002-A1 Ethernet module (MM) 0.026 kg S54400-A43-A1
VN2003-A1 Ethernet module (SM) 0.026 kg S54400-A44-A1
18
2021-10-22
Cloud gateway
CXG3.X200 Connect X200 Gateway 0.300 kg S55842-Z131-A100
FHA2063-A1 Mounting plate (X200) 0.269 kg S54400-B116-A1
FCA2056-A1 Accessory kit + ACDC (X200) 0.200 kg S54400-S115-A1
Batteries
FA2004-A1 Battery (12 V, 12 Ah, VdS) 3.750 kg A5Q00019354
BAT12-25 Battery (12 V, 25 Ah, VdS) 7.8 kg S54302-Z102-A1
FHA2061-A1 Mounting kit for batteries ‒ S54400-B91-A1
FHA2062-A1 Cable tie for batteries ‒ S54400-B92-A1
License keys
FCA2033-A1 License key (S1) 0.010 kg S54400-P154-A1
External printer
DL3750+ Matrix printer (external) 7.300 kg A5Q00023962
- Color ribbon for matrix printer 0.078 kg A5Q00023963

DL3750+
19
2021-10-22
Product documentation
Title Document ID
System documentation
System description 008836
Product data 008837
Planning 008843
Mounting/Installation 008851
System data sheet
FS20 – Fire detection system 008955
Data sheets
FC2020 - fire control panel 009383
FC2030 - fire control panel for modernization A6V10087532
FC2040 - fire control panel 009384
FC2060 - fire control panel (modular) A6V10087844
FC2080 - fire control panel (19", modular) A6V10275515
FT2040 - fire terminal 009386
FT2080 - fire terminal (Touch) A6V10378271
Fire detection system with integrated single A6V10880701

or multi-sector extinguishing
Network Security Guidelines A6V101039125
Planning overview A6V10906627
Related documents such as the environmental declarations, CE declarations, etc., can be

downloaded from the following Internet address:
www.siemens.com/bt/download
Guarantee
The application-specific technical data is guaranteed only in combination with the Siemens
products listed in the 'Device combinations' section. If third-party products are used, any
guarantee provided by Siemens will be invalidated.
20
2021-10-22
Technical data
Fire control panel (2 loops)/(2 loops, P) FC2020 in housing (Standard)
Supply Mains voltage AC 97…127 V / AC 196…253 V
Power supply 70 W
Operating voltage DC 20.5…28.6 V
Operating current Max. 2.5 A
Battery capacity 2x 12 V, max. 12 Ah
Battery monitoring Yes
Network monitoring Yes
Inputs / outputs Connectable detector series Sinteso (FDnet)
Number of addresses Max. 252
Number of integrated line cards 1
Number of lines:
● Loops (with loop extension) or 2 (4)
● Stubs 4 (8)
Integrated inputs/outputs:
● Alarm RT relay output 1
● Fault RT relay output 1
● Monitored alarm outputs 1
● Monitored fault outputs 1
● Monitored horn outputs 1
● Freely configurable inputs/outputs 8
Interfaces Operating unit Integrated
Slots for serial interfaces RS232, RS485 2
Slots for network modules 2
Slot for loop extension 1
Mounting space for cable kit 1

(communication)
Sounder module Max. 1
Ethernet port RJ45 1
21
2021-10-22
Fire control panel (2 loops)/(2 loops, P) FC2020 in housing (Standard)
Ambient conditions Operating temperature -8…+42 °C
Storage temperature -20…+60 °C
Air humidity (no condensation permitted) ≤95 % rel.
Maximum height above sea level 4000 m
Mechanical data Dimensions (W x H x D):
● Without cover cap 430 x 398 x 160 mm
● With cover cap 430 x 398 x 183 mm
Protection category (IEC 60529) IP30
Color:
● Housing ~RAL 7035 light gray
● Cover cap ~RAL 9010
Approvals VdS G206109
LPCB 126bn/01
FM 3048514
22
2021-10-22
Fire control panel (2 loops)/(2 loops, P) FC2020 in housing (Comfort)
Supply Mains voltage AC 115 / 230 V +10/-15 %
Power supply 150 W
Operating voltage DC 21…28.4 V
Operating current Max. 5 A
Battery capacity 2x 12 V, max. 25 Ah
Battery monitoring Yes
Network monitoring Yes
Inputs / outputs Connectable detector series Sinteso (FDnet)
Number of addresses Max. 252
Number of integrated line cards 1
Number of lines:
● Loops (with loop extension) or 2 (4)
● Stubs 4 (8)
Integrated inputs/outputs:
● Alarm RT relay output 1
● Fault RT relay output 1
● Monitored alarm outputs 1
● Monitored fault outputs 1
● Monitored horn outputs 1
● Freely configurable inputs/outputs 8
Interfaces Operating unit Integrated
Slots for serial interfaces RS232, RS485 2
Slots for network modules 2
Slot for loop extension 1
Mounting space for cable kit 1

(communication)
Sounder module Max. 1
Ethernet port RJ45 1
Ambient conditions Operating temperature -8…+42 °C
Storage temperature -20…+60 °C
Air humidity (no condensation permitted) ≤95 % rel.
Maximum height above sea level 3700 m
23
2021-10-22
Fire control panel (2 loops)/(2 loops, P) FC2020 in housing (Comfort)
Mechanical data Dimensions (W x H x D):
● Without cover cap 430 x 796 x 160 mm
● With cover cap 430 x 796 x 183 mm
Protection category (IEC 60529) IP30
Color:
● Housing ~RAL 7035 light gray
● Cover cap ~RAL 9010
Approvals VdS G206109
LPCB 126bn/01
FM 3048514
DNV GL (marine) MEDB00003UW
24
2021-10-22
Issued by
© Siemens Switzerland Ltd, 2007
Siemens Switzerland Ltd
Technical specifications and availability subject to change without notice.
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
+41 58 724 2424
www.siemens.com/buildingtechnologies
Document ID 009383_v_en_--
Edition 2021-10-22

A6V10062647 en

Uploaded by

Copyright:

Available Formats

A6V10062647 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

A6V10062647 en

Uploaded by

Copyright:

Available Formats

Sinteso™

Fire control panel

Compact, pre-assembled fire control panel with integrated, user-friendly

009383_v_en_-- Smart Infrastructure

Fig. 1: System overview

5 Remote access to management platform

6 Remote access with Sinteso Mobile

7 Router + firewall + virtual private network

8 Fire damper with actuator

Transmission of a fault signal

Transmission of an alarm signal

2 Remote access to management platform

Transmission of a fault signal

Transmission of an alarm signal

An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated

1 Remote access with SintesoView/ Sinteso Touch

5 Remote access to management platform

6 Remote access with Sinteso Mobile

7 Router + firewall + virtual private network

Transmission of a fault signal

Transmission of an alarm signal

General features and functions

Control panel-specific features

FC2020-AZ Housing (Standard)

Detector line (FDnet)

Detector line (FDnet)

FC2020-AA Housing (Comfort)

Detector line (FDnet)

FC2020-AE Housing (Comfort)

Detector line (FDnet)

FCM2036-A2 Operating add-on (4xLED indicator)

FCM2038-A2 Operating add-on (2xLED indicator)

FH2002-A1 Housing (Standard)

● Empty housing for free use

FH2003-A1 Housing (Comfort)

● Empty housing for free use

● Empty housing for free use

FH2005-A1 Housing (Large)

● Empty housing for free use

FH2007-A1 Housing (Standard + plan compartment)

● Empty housing for A4 documents

FTO2001-A1 Event printer

● Thermal printer for installation in operating units or operating add-ons

● External matrix printer recommended by Siemens

The following elements are available on the periphery board:

70 W or 150 W power supply, emergency power supply

FC2020 inside housing (Standard)

Fig. 4: FC2020 Standard

Position Designation Type Comment

1 Housing (Standard) FHA2002-A1 Items 1-5: Basic equipment for each

5 Operating unit FCM20xx-xx Operating unit with CPU

6 Space for batteries - 2x 12 V, 12 Ah

7 Relay module Z3B171 Relay for fire controls

8 Event printer FTO2001-A1 For logging events

9 Key switch (Kaba) FTO2005-C1 For operating access authorization

Key switch (nordic) FTO2006-B1

10 Mounting plate FHA2007-A1 e.g., for fire brigade periphery module

11 Loop extension (FDnet) FCI2003-A1 For loop extension of the periphery

Loop extension (FDnet/C-NET, P) FCI2025-A1 For loop extension of the periphery