Standard / Optional Equipment SK350DLC-10 SK400DLC-10 SK550DLC-10

STANDARD EQUIPMENT Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for specifics.

ENGINE CAB & CONTROL

SK350DLC / SK400DLC Tilt cab
Turbocharged and inter-cooled HINO J08EVV-KSDK Tier IV Final Diesel engine Demolition special cab
Automatic engine deceleration Electric horn

Demolition Machine
Auto Idle Stop (AIS) All-weather, sound-insulated cab
Batteries (2 x 12V - 96Ah) P5A glass
Starting motor (24V - 5 kW), 60 amp alternator Easy to read multi-display monitor
Removable radiator clean-out screen Automatic climate control
Automatic engine shut-down if low engine oil pressure Defroster
Side by side oil, hydraulic and engine radiators Air suspension seat with heater
Double-element air cleaner Headrest
Refueling pump Bluetooth installed radio (AM/FM Stereo with speakers)
Luggage tray
SK550DLC
Large cup holder
Engine, HINO P11C-VN, diesel engine with turbocharger and intercooler Detachable two-piece floor mat
Automatic engine deceleration Handrails
Auto Idle Stop (AIS) Wiper (top and front window)
Batteries (2 x 12V - 176Ah) Emergency escape hammer
Starting motor (24V - 5 kW), 60 amp alternator Attachment pressure release switch
Automatic engine shut-down for low engine oil pressure Manual DPF regeneration switch
Engine oil pan drain cock 12 V converter
Double element air cleaner Tip-over warning device
Refueling pump Cab interference prevention system
CONTROL Boom & arm & jib cylinder holding valves
Working mode selector (H-mode, S-mode and ECO-mode) Slow return check valves
Power Boost (only separate boom specification) 9mm thick swivel guard
6mm thick upper frame under cover guards
HYDRAULIC Auto lubrication system
Auto warm-up system Rotation and N&B auxiliary circuits and piping
Hydraulic oil cooler Stand for Ultra long and Separate Attachment
Hydraulic oil filter condition indicator Falling object deflector
Hydraulic oil for cold climates One way call
Quick hitch piping Remote machine monitoring system “KOMEXS”
Multi-coupler (QH line x 2, rotation line x 2, jib & arm pilot line x 2, drain x 1) Additional tool box (SK400DLC / SK550DLC)

SWING SYSTEM & TRAVEL SYSTEM Cab tilt operation alarm

Swing rebound prevention system Cab emergency lowering device
Two-speed travel with automatic down shift Crosspiece for operator safety in cab
Sealed & lubricated track links Console tilt
600mm shoes Cab tilt maintenance stopper
Grease-type track adjusters Battery shut-off
Automatic swing brake
Hydraulic retractable crawler

MIRRORS, LIGHTS & CAMERAS

Two rearview mirrors
Rear-view camera
Three front working lights (1 on upper carriage, 2 on cab)
Attachment front work light (separate boom: 2, ultra long attachment: 2)
Right side camera, additional monitor
Cab foot light
Cab foot mirror

OPTIONAL EQUIPMENT
Stand for 3.5m (2.4m) insert and 3.5m adapter
Extended guard rail (SK350DLC / SK400DLC)
Additional track guides
Full track guides
Travel alarm
Pin removal equipment
Water spray for separate boom and ultra long attachment
Additional tool box (only SK350DLC)

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications
that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
Veluwezoom 15
1327 AE Almere
The Netherlands
www.kobelco-europe.com

October 2018 | POD0131

 Designed and built to save time
and get you up and working!!
The KOBELCO demolition machine utilizes a common use type base boom
and exclusive NEXT attachment joint for the Ultra long front, boom insert and
the Separate boom.

KOBELCO’s demolition machines with the exclusive NEXT joint systems are made so you can set up or change
work fronts quick and easy to get the job done. With the ability to change tools on site and work at multiple
heights with a single machine, the productivity is maximized with the needs of the job.
The machine can be quickly set up and adapted to meet the job requirement and be use for the full duration of
the job instead of swapping out machines.
Due to the unique structure of this attachment, transport can be completed safely and with just a few steps.
Add that to the excellent fuel savings and machine durability, KOBELCO helps provide the owner reduced
operational costs, less downtime and greater return on investment.
KOBELCO’s SK350DLC, SK400DLC, SK550DLC demolition machine is the next generation of high performance
and cutting edge technology. It’s ready to go to work for you.

Focus on operation rate resulting in a machine with common use type base boom
Previous demolition machines had a structure that basically did not allow attachments to be exchanged, meaning one
complete machine was required for each specification. Having machines each dedicated to its specialty was useful onsite, but
this meant that the operation rate was low and users were required to own multiple machines. KOBELCO's solution was to
develop a machine structure that enabled one machine to be adapted to multiple specifications. Our solution took form in
the shape of the machine with common use type base boom.

The NEXT system, created with focus on the site

A machine with common use type base boom is transported by separating the main body and its attachments, requiring less
time for set-up after arriving onsite. KOBELCO studied in detail how the assembly work could be completed safely in a short
time. We threw out the previous fixed concepts about attachments and developed an innovative attachment that
incorporated our various ideas, resulting in the NEXT system.

All 3 models
8 wide line up of specification

1 2
 Designed and built to save time
and get you up and working!!
The KOBELCO demolition machine utilizes a common use type base boom
and exclusive NEXT attachment joint for the Ultra long front, boom insert and
the Separate boom.

KOBELCO’s demolition machines with the exclusive NEXT joint systems are made so you can set up or change
work fronts quick and easy to get the job done. With the ability to change tools on site and work at multiple
heights with a single machine, the productivity is maximized with the needs of the job.
The machine can be quickly set up and adapted to meet the job requirement and be use for the full duration of
the job instead of swapping out machines.
Due to the unique structure of this attachment, transport can be completed safely and with just a few steps.
Add that to the excellent fuel savings and machine durability, KOBELCO helps provide the owner reduced
operational costs, less downtime and greater return on investment.
KOBELCO’s SK350DLC, SK400DLC, SK550DLC demolition machine is the next generation of high performance
and cutting edge technology. It’s ready to go to work for you.

Focus on operation rate resulting in a machine with common use type base boom
Previous demolition machines had a structure that basically did not allow attachments to be exchanged, meaning one
complete machine was required for each specification. Having machines each dedicated to its specialty was useful onsite, but
this meant that the operation rate was low and users were required to own multiple machines. KOBELCO's solution was to
develop a machine structure that enabled one machine to be adapted to multiple specifications. Our solution took form in
the shape of the machine with common use type base boom.

The NEXT system, created with focus on the site

A machine with common use type base boom is transported by separating the main body and its attachments, requiring less
time for set-up after arriving onsite. KOBELCO studied in detail how the assembly work could be completed safely in a short
time. We threw out the previous fixed concepts about attachments and developed an innovative attachment that
incorporated our various ideas, resulting in the NEXT system.

All 3 models
8 wide line up of specification

1 2
 Assembly and disassembly Transportability

Work setups done quickly and safely!

The new-generation NEXT demolition attachment

NEXT attachment
The new-generation NEXT demolition attachment for the demolition
machine with common use type base boom was designed by KOBELCO
without being limited by existing concepts. Each boom attachment has a
block structure that simplifies assembly/disassembly and transport, and the
attachments employ our original NEXT joint system. The piping can be
connected easily, and the steps for attachment assembly/disassembly from
pressure release to pin fixing can be completed safely in a short time. Separate boom specification

■ NEXT joint system Attachments and base machine designed for easy truck transport
KOBELCO's original joint system was developed by testing the assembly/disassembly process extensively. The boom attachment can be connected just by hooking the
upper (backside) pin and fixing with the separate opposing pins on the lower side (bottom side). Attachment height during transport Quick hitch piping
Upper pin Simple hooking structure Connection hook Hook Upper pin [NEXT ultra long attachment specification]
A hydraulic circuit for
The 3-piece NEXT ultra long attachment is designed with the jib cylinder and arm cylinder crossed the quick-hitch arm that
over the short inter arm, and the back of the arm is flat. The height while in the stored state has been allows quick and easy
lessened to approx. 2m to lower the entire height during transport. fitting of the front
attachment is supplied
Upper side (back side): Pins just need to be
hooked. There is no need to insert/remove Approx. as standard.
the pins.
Left/right split pins 2m

Short inter arm

Cross cylinder layout Flat arm back
Guide
Lower side (bottom side): Guided left/right
separate opposing pins make it easy to
Left/right separate opposing pins do not need to be removed position the pins.
Hydraulic crawler extension / Two-part counterweight [SK400DLC / SK550DLC]
■ Main front boom [NEXT separate boom specification] ■ Side-mounted hydraulic piping retraction mechanism [SK400DLC / SK550DLC]
Assembly of the separate boom simply means connecting the main front boom with which the jib All attachment joints have the hydraulic piping mounted on the side, The counterweight can be separated into two for
cylinder foot section is integrated, to the all-purpose base boom using the NEXT joint system. This adopting hydraulic multi-coupler system for connecting sections. Crawlers can be retracted to reduce crawler width to below 3m for ease of transport. One part forms a case into which the
transport. The hydraulic system makes light work of extending or retracting with other part is housed. It looks neat and uncluttered,
saves on the work otherwise required to connect the jib cylinder.
crawler shoes remaining on ground. and assembly/disassembly is faster than with an
integrated counterweight.

Retracted crawler width

2,980mm
Main front boom Piping connection: Hydraulic multi-coupler system on the side of the boom.
Extended crawler width 3,720mm
Photo shows earlier model

3 4
 Assembly and disassembly Transportability

Work setups done quickly and safely!

The new-generation NEXT demolition attachment

NEXT attachment
The new-generation NEXT demolition attachment for the demolition
machine with common use type base boom was designed by KOBELCO
without being limited by existing concepts. Each boom attachment has a
block structure that simplifies assembly/disassembly and transport, and the
attachments employ our original NEXT joint system. The piping can be
connected easily, and the steps for attachment assembly/disassembly from
pressure release to pin fixing can be completed safely in a short time. Separate boom specification

■ NEXT joint system Attachments and base machine designed for easy truck transport
KOBELCO's original joint system was developed by testing the assembly/disassembly process extensively. The boom attachment can be connected just by hooking the
upper (backside) pin and fixing with the separate opposing pins on the lower side (bottom side). Attachment height during transport Quick hitch piping
Upper pin Simple hooking structure Connection hook Hook Upper pin [NEXT ultra long attachment specification]
A hydraulic circuit for
The 3-piece NEXT ultra long attachment is designed with the jib cylinder and arm cylinder crossed the quick-hitch arm that
over the short inter arm, and the back of the arm is flat. The height while in the stored state has been allows quick and easy
lessened to approx. 2m to lower the entire height during transport. fitting of the front
attachment is supplied
Upper side (back side): Pins just need to be
hooked. There is no need to insert/remove Approx. as standard.
the pins.
Left/right split pins 2m

Short inter arm

Cross cylinder layout Flat arm back
Guide
Lower side (bottom side): Guided left/right
separate opposing pins make it easy to
Left/right separate opposing pins do not need to be removed position the pins.
Hydraulic crawler extension / Two-part counterweight [SK400DLC / SK550DLC]
■ Main front boom [NEXT separate boom specification] ■ Side-mounted hydraulic piping retraction mechanism [SK400DLC / SK550DLC]
Assembly of the separate boom simply means connecting the main front boom with which the jib All attachment joints have the hydraulic piping mounted on the side, The counterweight can be separated into two for
cylinder foot section is integrated, to the all-purpose base boom using the NEXT joint system. This adopting hydraulic multi-coupler system for connecting sections. Crawlers can be retracted to reduce crawler width to below 3m for ease of transport. One part forms a case into which the
transport. The hydraulic system makes light work of extending or retracting with other part is housed. It looks neat and uncluttered,
saves on the work otherwise required to connect the jib cylinder.
crawler shoes remaining on ground. and assembly/disassembly is faster than with an
integrated counterweight.

Retracted crawler width

2,980mm
Main front boom Piping connection: Hydraulic multi-coupler system on the side of the boom.
Extended crawler width 3,720mm
Photo shows earlier model

3 4
 Workability Low fuel consumption

Boom attachments can be changed Fuel costs can be reduced with outstanding
easily, enabling a high machine low fuel consumption and mode selection
operation rate New environmental engine
A new electronically controlled engine with high
Separate boom specification power and low fuel consumption is installed.
Par ticulate matter and NOx emissions are
KOBELCO has pioneered the development of the suppressed through the engine’s high combustion
separate boom in Japan, and the NEXT separate boom is efficiency, exhaust gas after-treatment equipment,
the product of a wealth of technologies built up through and urea SCR system. The
long experience in this field. By attaching a large nibbler, engine also conforms to
demolition is completed swiftly and efficiently, whether EPA Tier IV Final regula-
it’s the lower floors of tall buildings where the concrete tions.
is thickest, or basement floors and foundations. Working
ranges at machine foot are extensive, and the maximum
working depth is top level in all classes.

■ Maximum work depth AIS (Auto Idle Stop)

6,260mm This idling stop function eliminates

wasteful fuel consumption while waiting
Pull up safety lock lever
Engine deceleration
between operations. The engine stops
6,210mm

Engine rpm
automatically when the operation lever Alarm
Engine
4 sec
continues to remain in the locked state. stops
6,320mm 55 sec
60 sec Elapsed
time
Note: The measurement is for the arm bucket pin position.

NEXT ultra long attachment specification Fuel consumption mode

A function is provided for H mode

Long reach attachment specifications ■ Maximum work height
are for high elevation demolition switching modes to prioritize When prioritizing work volume
fuel consumption depending
carried out from ground level. Maxi-
m u m wo r k i n g h e i g h t fo r b o t h
6.1m arm Approx. 25.0m 8.7m arm Approx. 27.5m on the work content. Modes S mode
can be switched while using When prioritizing the balance between
SK400DLC and SK550DLC is top level work volume and fuel consumption
in their class. Can handle general 6.1m arm Approx. 21.1m 8.7m arm Approx. 24.7m any front attachment including
the nibbler, breaker, or bucket. ECO mode
demolition of 8~9 story buildings, When extensively prioritizing fuel
and height can be reduced by remov-
ing the insert boom.
6.1m arm Approx. 21.0m consumption

Note: The measurement is for the arm bucket pin position. Bucket / nibbler / breaker mode switch

Large nibbler New cluster gauge

With ultra long attachment specification, large crusher with mouth width exceeding 1m can be accommodated. Separate boom
A new color multi-display with multi-function indicators is installed. In
specification have a large nibbler already installed, for powerful crushing and efficient performance.
addition to gauges and information such as fuel consumption, maintenance,
working radius/boom angle, and rear view camera images, the selected
KR1100TPR-2
attachment mode and mounted front attachment are also displayed.
Mouth width 1,100mm
Weight 2,580kg Crushing force (center) 1,520kN

KR1350TPR-40
Mouth width 1,350mm
Weight 3,750kg Crushing force (center) 1,770kN

KR1500TPR-50
Mouth width 1,530mm Ultra long attachment Fuel consumption Attachment mode Front attachment
Weight 5,200kg Crushing force (center) 2,080kN KR1100TPR-2 KR1350TPR-40
selection screen selection screen
specification
6.1m arm + 3.5m boom insert

5 6
 Workability Low fuel consumption

Boom attachments can be changed Fuel costs can be reduced with outstanding
easily, enabling a high machine low fuel consumption and mode selection
operation rate New environmental engine
A new electronically controlled engine with high
Separate boom specification power and low fuel consumption is installed.
Par ticulate matter and NOx emissions are
KOBELCO has pioneered the development of the suppressed through the engine’s high combustion
separate boom in Japan, and the NEXT separate boom is efficiency, exhaust gas after-treatment equipment,
the product of a wealth of technologies built up through and urea SCR system. The
long experience in this field. By attaching a large nibbler, engine also conforms to
demolition is completed swiftly and efficiently, whether EPA Tier IV Final regula-
it’s the lower floors of tall buildings where the concrete tions.
is thickest, or basement floors and foundations. Working
ranges at machine foot are extensive, and the maximum
working depth is top level in all classes.

■ Maximum work depth AIS (Auto Idle Stop)

6,260mm This idling stop function eliminates

wasteful fuel consumption while waiting
Pull up safety lock lever
Engine deceleration
between operations. The engine stops
6,210mm

Engine rpm
automatically when the operation lever Alarm
Engine
4 sec
continues to remain in the locked state. stops
6,320mm 55 sec
60 sec Elapsed
time
Note: The measurement is for the arm bucket pin position.

NEXT ultra long attachment specification Fuel consumption mode

A function is provided for H mode

Long reach attachment specifications ■ Maximum work height
are for high elevation demolition switching modes to prioritize When prioritizing work volume
fuel consumption depending
carried out from ground level. Maxi-
m u m wo r k i n g h e i g h t fo r b o t h
6.1m arm Approx. 25.0m 8.7m arm Approx. 27.5m on the work content. Modes S mode
can be switched while using When prioritizing the balance between
SK400DLC and SK550DLC is top level work volume and fuel consumption
in their class. Can handle general 6.1m arm Approx. 21.1m 8.7m arm Approx. 24.7m any front attachment including
the nibbler, breaker, or bucket. ECO mode
demolition of 8~9 story buildings, When extensively prioritizing fuel
and height can be reduced by remov-
ing the insert boom.
6.1m arm Approx. 21.0m consumption

Note: The measurement is for the arm bucket pin position. Bucket / nibbler / breaker mode switch

Large nibbler New cluster gauge

With ultra long attachment specification, large crusher with mouth width exceeding 1m can be accommodated. Separate boom
A new color multi-display with multi-function indicators is installed. In
specification have a large nibbler already installed, for powerful crushing and efficient performance.
addition to gauges and information such as fuel consumption, maintenance,
working radius/boom angle, and rear view camera images, the selected
KR1100TPR-2
attachment mode and mounted front attachment are also displayed.
Mouth width 1,100mm
Weight 2,580kg Crushing force (center) 1,520kN

KR1350TPR-40
Mouth width 1,350mm
Weight 3,750kg Crushing force (center) 1,770kN

KR1500TPR-50
Mouth width 1,530mm Ultra long attachment Fuel consumption Attachment mode Front attachment
Weight 5,200kg Crushing force (center) 2,080kN KR1100TPR-2 KR1350TPR-40
selection screen selection screen
specification
6.1m arm + 3.5m boom insert

5 6
 Safety

Enhanced safety functions to assist

the operator in production and performance
New cab interference prevention system

The cab interference prevention system is standard on the SK350DLC, ■ System operation
SK400DLC, SK550DLC. This feature sounds an alarm and prevents the As the working tool approaches the cab, alarm is sounded before any contact can occur, and the
machine from allowing the working tool to come into contact with the cab machine automatically prevents tool from making contact with the cab.
during operation. Current tool position can be detected with high accuracy
so the tool can be moved at close range near the cab , resulting in increased
safe working range.

■ System configuration
The system calculates the various boom, attachment and idler link angles to create a
proximity to the cab in order to prevent cab interference.

Tilt cab

Cab support to allow tilting up to 30° is supplied as standard. The operator

can maintain a comfortable posture during high elevation demolition work,
suffering less fatigue over long working periods.

Separate boom specification

• Crosspiece on right side cab window for operator safety should the glass be broken. Multiple standard features and accessories for ensuring safety
• Cab foot mirror and cab foot light to ensure full visibility for work at machine foot.
• Maintenance stopper for greater safety during tilt mechanism maintenance.
• Alarm to prevent accidents when cab tilting is operated.
• Cab lowering device for emergencies.

Demolition special cab Stability warning system

The adjoining edge of the top and front windows are free of The working radius and stability are calculated Rear view camera Right side camera + monitor Boom, arm and jib holding valves Cab with two lights
view-obstructing pillars, and radial type grid guards are installed from the position of the attachment, and the The rear view camera is displayed on the Rear and side camera views can be Standard - to prevent boom or arm from Cab mounted lights are standard.
on front and upper sides. This gives the operator an unobstructed operator is warned with a alarm (continuous multi-display. displayed on the separate monitor. falling if hose is damaged.
and continuous view from ground level to the maximum working sound) where the machine’s stability could be
height. compromised.

60°
Vertical
direction
Lateral 120°
Swing angle sensor direction
• ISO 10262 level II FOPS front and top guards.
• The cab guards can be opened and closed without tools, and the glass can be cleaned easily. The tip over risk area will vary according to the upper orientation since the
• Vertical open/close roller shades that can be stopped at any position. safety allowance will vary depending on the swing angle. The maximum
• Laminated front window. One way call Travel alarm Option Specialized attachment stands Option Falling object deflector
working radius is larger when facing the vertical direction.
• High strength security glass that complies with European P5A anti-crime standard. Operator is able to alert ground workers without The alarm cautions workers in the area that For greater safety and efficiency during The guard deflects falling debris away from the machine.
taking their hands off the machine controls. the machine is traveling. assembly, disassembly and transport. This is standard for the ultra long attachment.

* The accessory settings may differ according to the class or specification. Refer to the list of key accessories on the back page for details.
7 8
 Safety

Enhanced safety functions to assist

the operator in production and performance
New cab interference prevention system

The cab interference prevention system is standard on the SK350DLC, ■ System operation
SK400DLC, SK550DLC. This feature sounds an alarm and prevents the As the working tool approaches the cab, alarm is sounded before any contact can occur, and the
machine from allowing the working tool to come into contact with the cab machine automatically prevents tool from making contact with the cab.
during operation. Current tool position can be detected with high accuracy
so the tool can be moved at close range near the cab , resulting in increased
safe working range.

■ System configuration
The system calculates the various boom, attachment and idler link angles to create a
proximity to the cab in order to prevent cab interference.

Tilt cab

Cab support to allow tilting up to 30° is supplied as standard. The operator

can maintain a comfortable posture during high elevation demolition work,
suffering less fatigue over long working periods.

Separate boom specification

• Crosspiece on right side cab window for operator safety should the glass be broken. Multiple standard features and accessories for ensuring safety
• Cab foot mirror and cab foot light to ensure full visibility for work at machine foot.
• Maintenance stopper for greater safety during tilt mechanism maintenance.
• Alarm to prevent accidents when cab tilting is operated.
• Cab lowering device for emergencies.

Demolition special cab Stability warning system

The adjoining edge of the top and front windows are free of The working radius and stability are calculated Rear view camera Right side camera + monitor Boom, arm and jib holding valves Cab with two lights
view-obstructing pillars, and radial type grid guards are installed from the position of the attachment, and the The rear view camera is displayed on the Rear and side camera views can be Standard - to prevent boom or arm from Cab mounted lights are standard.
on front and upper sides. This gives the operator an unobstructed operator is warned with a alarm (continuous multi-display. displayed on the separate monitor. falling if hose is damaged.
and continuous view from ground level to the maximum working sound) where the machine’s stability could be
height. compromised.

60°
Vertical
direction
Lateral 120°
Swing angle sensor direction
• ISO 10262 level II FOPS front and top guards.
• The cab guards can be opened and closed without tools, and the glass can be cleaned easily. The tip over risk area will vary according to the upper orientation since the
• Vertical open/close roller shades that can be stopped at any position. safety allowance will vary depending on the swing angle. The maximum
• Laminated front window. One way call Travel alarm Option Specialized attachment stands Option Falling object deflector
working radius is larger when facing the vertical direction.
• High strength security glass that complies with European P5A anti-crime standard. Operator is able to alert ground workers without The alarm cautions workers in the area that For greater safety and efficiency during The guard deflects falling debris away from the machine.
taking their hands off the machine controls. the machine is traveling. assembly, disassembly and transport. This is standard for the ultra long attachment.

* The accessory settings may differ according to the class or specification. Refer to the list of key accessories on the back page for details.
7 8
 Reliability, Durability, and Maintainability

Highly durable structure to show enduring

excellent performance in hard operations
Factory engineered Heavy Duty boom and arm
[Ultra long attachment] Various functions and accessories for the longevity of the machine
Lifting eyes are provided.

Hoses are routed for easy maintenance.

Upper frame under cover guards Swivel guard Water spray (with drainage circuit) Option
Hydraulic oil filter restiction indicator The 6mm thick reinforced cover protects the The lower car body structure is fitted A drainage circuit is newly installed to
inner devices & engine unit. underneath with a 9mm thick reinforced prevent rusting valves. The pipe can be
cover. drained after sprinkle water.
Clogging is detected by the pressure Pressure detector
difference at the filter entrance and exit, and
warnings are displayed on the color
multi-display. Hydraulic equipment trouble
can be prevented by taking action before
contaminants enter the hydraulic oil tank. Hydraulic Hydraulic
oil filter oil tank

LED lights

Bright, long-life LED lights fitted to left and Air cleaner (double element) Auto lubrication system
right of arm for ultra long attachment New hydraulic oil filter The double filter structure and large The attachment is automatically oiled at
specification, and to left and right of boom for Glass filtration material with outstanding capacity prevent dust from being sucked in. specified times. Eliminates the trouble of
cleaning ability and durability is used. oiling before starting work.
separate boom specification.

Dedicated arm for the ultra long attachment

Various reinforcements and protective structures are incorporated in the arm section to
prevent damage from contact or flying debris.
Additional tool box Option SK350DLC Reinforced guard for travel motor Fuel fill-up pump
A large storage box for storing tools is Thick steel plate used to ensure strength Quick, safe fuel fill-ups possible from a
provided. and minimize gap with frame. standing position without the need to
mount upper carriage.

Guided reinforced bucket cylinder guard with Electric wiring with optimized routing and full
box-type structure cover for preventing damage

Battery shut-off device Full track guides Option Crawler extension/retraction

Single switch to prevent battery discharge Crawler de-tracking prevented even on mechanism guard
Ultra long attachment over long inactive periods. roughest ground littered with demolition Hydraulic cylinders protected from flying
Hoses routed to protect from damages Guarded work LED lights specification rubble. demolition rubble.
6.1m arm + 3.5m boom insert
* The accessory settings may differ according to the class or specification. Refer to the list of key accessories on the back page for details.
9 10
 Reliability, Durability, and Maintainability

Highly durable structure to show enduring

excellent performance in hard operations
Factory engineered Heavy Duty boom and arm
[Ultra long attachment] Various functions and accessories for the longevity of the machine
Lifting eyes are provided.

Hoses are routed for easy maintenance.

Upper frame under cover guards Swivel guard Water spray (with drainage circuit) Option
Hydraulic oil filter restiction indicator The 6mm thick reinforced cover protects the The lower car body structure is fitted A drainage circuit is newly installed to
inner devices & engine unit. underneath with a 9mm thick reinforced prevent rusting valves. The pipe can be
cover. drained after sprinkle water.
Clogging is detected by the pressure Pressure detector
difference at the filter entrance and exit, and
warnings are displayed on the color
multi-display. Hydraulic equipment trouble
can be prevented by taking action before
contaminants enter the hydraulic oil tank. Hydraulic Hydraulic
oil filter oil tank

LED lights

Bright, long-life LED lights fitted to left and Air cleaner (double element) Auto lubrication system
right of arm for ultra long attachment New hydraulic oil filter The double filter structure and large The attachment is automatically oiled at
specification, and to left and right of boom for Glass filtration material with outstanding capacity prevent dust from being sucked in. specified times. Eliminates the trouble of
cleaning ability and durability is used. oiling before starting work.
separate boom specification.

Dedicated arm for the ultra long attachment

Various reinforcements and protective structures are incorporated in the arm section to
prevent damage from contact or flying debris.
Additional tool box Option SK350DLC Reinforced guard for travel motor Fuel fill-up pump
A large storage box for storing tools is Thick steel plate used to ensure strength Quick, safe fuel fill-ups possible from a
provided. and minimize gap with frame. standing position without the need to
mount upper carriage.

Guided reinforced bucket cylinder guard with Electric wiring with optimized routing and full
box-type structure cover for preventing damage

Battery shut-off device Full track guides Option Crawler extension/retraction

Single switch to prevent battery discharge Crawler de-tracking prevented even on mechanism guard
Ultra long attachment over long inactive periods. roughest ground littered with demolition Hydraulic cylinders protected from flying
Hoses routed to protect from damages Guarded work LED lights specification rubble. demolition rubble.
6.1m arm + 3.5m boom insert
* The accessory settings may differ according to the class or specification. Refer to the list of key accessories on the back page for details.
9 10
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Engine Boom, Arm & Bucket

SK350DLC SK400DLC SK550DLC SK350DLC SK400DLC SK550DLC
Model HINO JO8EVV-KSDK HINO P11C-VN 3-piece ultra long attachment
Type Four-stroke liquid-cooled direct injection type diesel engine with intercooler turbo-charger Boom cylinders 170 mm x 1,505 mm 180 mm x 1,580 mm
No. of cylinders 6
Arm cylinder 170 mm x 1,210 mm
Bore and stroke 112 mm x 130 mm 122 mm x 150 mm
Bucket cylinder 125 mm x 1,200 mm
Displacement 7.684 L 10.52 L
Jib cylinders 140 mm x 1,210 mm
Rated power output 201 kW/2,100 min-1 (ISO 9249) 213 kW/2,100 min-1 (ISO 14396) 271 kW/1,850 min-1 (ISO 14396)
Max. torque 988 N·m/1,600 min-1 (ISO 9249) 1,017 N·m/1,600 min-1 (ISO 14396) 1,470 N·m/1,400 min-1 (ISO 14396) Max. tool weight 2,600 kg (6.1m arm) 3,000 kg (6.1m arm) 2,600 kg (8.7m arm)
Separate attachment
Boom cylinders 170 mm x 1,505 mm 180 mm x 1,580 mm

Hydraulic System
Arm cylinder 170 mm x 1,788 mm 190 mm x 1,970 mm
Bucket cylinder 150 mm x 1,193 mm 160 mm x 1,410 mm
Jib cylinders 240 mm x 1,317 mm 270 mm x 1,418 mm
SK350DLC SK400DLC SK550DLC Max. tool weight 4,000 kg 5,300 kg
Pump
Type Two variable displacement piston pumps + one gear pump
Max. discharge flow 2 x 294 L/min,1 x 20 L/min 2 x 370 L/min, 1 x 63.5 L/min
Relief valve setting Refilling Capacities & Lubrications
Excavating circuits (main) 31.4 MPa
Power Boost* 34.3 MPa
SK350DLC SK400DLC SK550DLC
Travel circuit 34.3 MPa
Fuel tank 503 L 638 L
Swing circuit 29.0 MPa 26.0 MPa
Pilot control circuit 5.0 MPa Cooling system 35 L 48.5 L
Nibbler (Crusher) circuit 31.4 MPa (Power Boost 34.3MPa) Rotation 20.6 MPa Engine oil 28.5 L 42.5 L
Main control valve 8-spool Travel reduction gear 2 x 8.0 L 2 x 15 L
*Only Separate boom specification Swing reduction gear 7.4 L 7.4 L
245 L tank oil level 371 L tank oil level
Hydraulic oil tank
Swing System DEF/AdBlue tank
410 L hydraulic system
83 L
720 L hydraulic system
83 L

SK350DLC SK400DLC SK550DLC

Swing motor One fixed displacement piston pump Two fixed displacement piston pumps
Brake Hydraulic Attachments
Parking brake Wet multiple plate
Swing speed 10.0 min-1 7.6 min-1
Nibbler
Swing torque 119.6 k N·m 183 kN·m
Tail swing radius 3,600 mm 3,800 mm Model KR1100TPR-2 KR1350TPR-40 KR1500TPR-50
Weight kg 2,580 3,750 5,200

φ960
C φ900

Travel System
φ830
3,080
2,720
2,545
A Overall length A
SK350DLC SK400DLC SK550DLC B Width mm
Dimensions C Diameter
Travel motors Variable displacement piston pump
D Mouth width
Travel brakes Hydraulic
D 1,100 1,350 1,530
Parking brakes Wet multiple plate B 1,720 2,070 2,250
Travel shoes 48 each side 50 each side
Travel speed (high/low) 5.6/3.3 km/h 5.4/3.4 km/h Blade length mm 200 200 200
Drawbar pulling force 310kN (SAE) 318 kN (SAE) 415 kN (SAE)
Crushing Top kN 940 1,210 1,420
Gradeability 70 % (35 deg)
force Center kN 1,520 1,770 2,080
Assemble Arm top width mm 325 380 450
dimensions Pin diameter mm φ80 φ90 φ100
Cab & Control Working hydraulic pressure MPa 34.3 31.4 29.4
Note: Units follow the International System of Units (SI).

SK350DLC SK400DLC SK550DLC

Cab
All-weather, sound-suppressed steel cab mounted on the high suspension mounts
Operating Weight & Ground Pressure
Control SK350DLC SK400DLC SK550DLC
Two hand levers and two foot pedals for travel
3-piece ultra long
Two hand levers for excavating and swing 3-piece ultra long attachment/ 3-piece ultra long attachment/
attachment/ Separate Separate Separate
Electric rotary-type engine throttle Attachment Type equipment * equipment *
equipment * attachment * attachment * attachment *
Tilting Cab (30°)
Noise levels 6.1m arm 6.1m arm 8.7m arm 6.1m arm 8.7m arm
External 105dB(A) (ISO 6395) 104 dB(A) (ISO 6395) Operating Weight 44,700 kg 45,200 kg 48,800 kg 49,600 kg 49,300 kg 62,600 kg 63,100 kg 64,600 kg
Operator 69 dB(A) (ISO 6396) Ground Pressure 84 kPa 85 kPa 91 kPa 93 kPa 92 kPa 107 kPa 108 kPa 111 kPa
* Measured with max tool weight

11 12
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Engine Boom, Arm & Bucket

SK350DLC SK400DLC SK550DLC SK350DLC SK400DLC SK550DLC
Model HINO JO8EVV-KSDK HINO P11C-VN 3-piece ultra long attachment
Type Four-stroke liquid-cooled direct injection type diesel engine with intercooler turbo-charger Boom cylinders 170 mm x 1,505 mm 180 mm x 1,580 mm
No. of cylinders 6
Arm cylinder 170 mm x 1,210 mm
Bore and stroke 112 mm x 130 mm 122 mm x 150 mm
Bucket cylinder 125 mm x 1,200 mm
Displacement 7.684 L 10.52 L
Jib cylinders 140 mm x 1,210 mm
Rated power output 201 kW/2,100 min-1 (ISO 9249) 213 kW/2,100 min-1 (ISO 14396) 271 kW/1,850 min-1 (ISO 14396)
Max. torque 988 N·m/1,600 min-1 (ISO 9249) 1,017 N·m/1,600 min-1 (ISO 14396) 1,470 N·m/1,400 min-1 (ISO 14396) Max. tool weight 2,600 kg (6.1m arm) 3,000 kg (6.1m arm) 2,600 kg (8.7m arm)
Separate attachment
Boom cylinders 170 mm x 1,505 mm 180 mm x 1,580 mm

Hydraulic System
Arm cylinder 170 mm x 1,788 mm 190 mm x 1,970 mm
Bucket cylinder 150 mm x 1,193 mm 160 mm x 1,410 mm
Jib cylinders 240 mm x 1,317 mm 270 mm x 1,418 mm
SK350DLC SK400DLC SK550DLC Max. tool weight 4,000 kg 5,300 kg
Pump
Type Two variable displacement piston pumps + one gear pump
Max. discharge flow 2 x 294 L/min,1 x 20 L/min 2 x 370 L/min, 1 x 63.5 L/min
Relief valve setting Refilling Capacities & Lubrications
Excavating circuits (main) 31.4 MPa
Power Boost* 34.3 MPa
SK350DLC SK400DLC SK550DLC
Travel circuit 34.3 MPa
Fuel tank 503 L 638 L
Swing circuit 29.0 MPa 26.0 MPa
Pilot control circuit 5.0 MPa Cooling system 35 L 48.5 L
Nibbler (Crusher) circuit 31.4 MPa (Power Boost 34.3MPa) Rotation 20.6 MPa Engine oil 28.5 L 42.5 L
Main control valve 8-spool Travel reduction gear 2 x 8.0 L 2 x 15 L
*Only Separate boom specification Swing reduction gear 7.4 L 7.4 L
245 L tank oil level 371 L tank oil level
Hydraulic oil tank
Swing System DEF/AdBlue tank
410 L hydraulic system
83 L
720 L hydraulic system
83 L

SK350DLC SK400DLC SK550DLC

Swing motor One fixed displacement piston pump Two fixed displacement piston pumps
Brake Hydraulic Attachments
Parking brake Wet multiple plate
Swing speed 10.0 min-1 7.6 min-1
Nibbler
Swing torque 119.6 k N·m 183 kN·m
Tail swing radius 3,600 mm 3,800 mm Model KR1100TPR-2 KR1350TPR-40 KR1500TPR-50
Weight kg 2,580 3,750 5,200

φ960
C φ900

Travel System
φ830
3,080
2,720
2,545
A Overall length A
SK350DLC SK400DLC SK550DLC B Width mm
Dimensions C Diameter
Travel motors Variable displacement piston pump
D Mouth width
Travel brakes Hydraulic
D 1,100 1,350 1,530
Parking brakes Wet multiple plate B 1,720 2,070 2,250
Travel shoes 48 each side 50 each side
Travel speed (high/low) 5.6/3.3 km/h 5.4/3.4 km/h Blade length mm 200 200 200
Drawbar pulling force 310kN (SAE) 318 kN (SAE) 415 kN (SAE)
Crushing Top kN 940 1,210 1,420
Gradeability 70 % (35 deg)
force Center kN 1,520 1,770 2,080
Assemble Arm top width mm 325 380 450
dimensions Pin diameter mm φ80 φ90 φ100
Cab & Control Working hydraulic pressure MPa 34.3 31.4 29.4
Note: Units follow the International System of Units (SI).

SK350DLC SK400DLC SK550DLC

Cab
All-weather, sound-suppressed steel cab mounted on the high suspension mounts
Operating Weight & Ground Pressure
Control SK350DLC SK400DLC SK550DLC
Two hand levers and two foot pedals for travel
3-piece ultra long
Two hand levers for excavating and swing 3-piece ultra long attachment/ 3-piece ultra long attachment/
attachment/ Separate Separate Separate
Electric rotary-type engine throttle Attachment Type equipment * equipment *
equipment * attachment * attachment * attachment *
Tilting Cab (30°)
Noise levels 6.1m arm 6.1m arm 8.7m arm 6.1m arm 8.7m arm
External 105dB(A) (ISO 6395) 104 dB(A) (ISO 6395) Operating Weight 44,700 kg 45,200 kg 48,800 kg 49,600 kg 49,300 kg 62,600 kg 63,100 kg 64,600 kg
Operator 69 dB(A) (ISO 6396) Ground Pressure 84 kPa 85 kPa 91 kPa 93 kPa 92 kPa 107 kPa 108 kPa 111 kPa
* Measured with max tool weight

11 12
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Dimensions Dimensions
Dimensions (main body + base boom) Unit: mm Assembled machine dimensions Unit: mm Dimensions (main body + base boom) Unit: mm Assembled machine dimensions Unit: mm

• Ultra long attachment : 6.1m arm + 3.5m boom insert • Ultra long attachment : 8.7m arm + 2.4m boom insert
7,340 16,910
7,340
15,820

3,330
2,800
3,220
2,700
• Ultra long attachment : 8.7m arm 14,510

3,330
without boom insert

3,220

3,330
2,760
• Ultra long attachment : 6.1m arm
without boom insert

4,960 12,310 4,960 • Ultra long attachment : 6.1m arm + 3.5m boom insert 15,810

3,220
2,630

3,330
2,780
2,980
2,980

• Ultra long attachment : 6.1m arm 12,300

without boom insert
• Separate boom specification

3,330
3,330

2,700
3,220

2,980
2,870

13,350

• Separate boom specification 13,310

3,220
3,290

600 2,880 (2,380)

2,590 600

3,700

3,330
3,480 (2,980)
3,190 3,720

Disassembled dimensions and weight Unit: mm Disassembled dimensions and weight Unit: mm
Main body + base boom Main body + base boom (without counterweight) Main body + base boom + boom insert Main body + base boom Main body + base boom (without counterweight) Main body + base boom + 3.5m boom insert
7,340 7,120 10,750

7,340 7,120 10,770

3,330

3,330

3,330
Weight: 38,700 kg Weight: 28,500 kg Weight: 40,300 kg

3,220
3,220

3,220

Main body + base boom + 3.5m boom insert Main body + base boom + 2.4m boom insert Main body + base boom + 2.4m boom insert
(without counterweight) 10,530 9,660 (without counterweight) 9,440

3,330

3,330

3,330
Weight: 34,600 kg Weight: 25,100 kg Weight: 36,300 kg

Main body + base boom + boom insert Counterweight Ultra long attachment : 6.1m arm + 3.5m boom insert
(without counterweight) (including enclosed stand) Weight: 30,200 kg Weight: 40,100 kg Weight: 29,900 kg

Counterweight Case Counterweight Ultra long attachment : 8.7m arm + 2.4m boom insert
(including enclosed stand)
10,550 2,980 1,010 2,360 620
9,220 10,300
1,140

1,100
1,140

2,080
3,220

2,030

2,980 1,010 Weight: 3,220 kg Weight: 6,860 kg Overall width: 1,770 mm Weight: 8,450 kg

Ultra long attachment : 8.7m arm Ultra long attachment : 2.4m boom insert Ultra long attachment : 6.1m arm + 3.5m boom insert
Weight: 26,800 kg Weight: 9,460 kg Overall width: 1,770 mm Weight: 7,620 kg (including enclosed stand) (including optional stand) (including enclosed stand)
9,200 3,240 920 9,220
Ultra long attachment : 6.1m arm Ultra long attachment : 3.5m boom insert Separate boom
(including enclosed stand) (including optional stand) (including enclosed stand)

2,030
2,080

1,730

1,010
Overall width: 1,770 mm Weight: 7,040 kg Overall width: 1,770 mm Weight: 1,650 kg Overall width: 1,770 mm Weight: 7,620 kg
6,590 4,310 920 8,850
Ultra long attachment : 6.1m arm Ultra long attachment : 3.5m boom insert Separate boom
850

(including enclosed stand) (including optional stand) (including enclosed stand)

2,200

2,980
1,910

6,590 4,340 920 8,800

1,190

2,030

1,910

2,710
1,190
Overall width: 1,770 mm Weight: 5,930 kg Overall width: 1,770 mm Weight: 1,960 kg Overall width: 1,770 mm Weight: 6,680 kg Overall width: 1,770 mm Weight: 5,930 kg Overall width: 1,770 mm Weight: 1,960 kg Overall width: 1,850 mm Weight: 6,680 kg

13 14
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Dimensions Dimensions
Dimensions (main body + base boom) Unit: mm Assembled machine dimensions Unit: mm Dimensions (main body + base boom) Unit: mm Assembled machine dimensions Unit: mm

• Ultra long attachment : 6.1m arm + 3.5m boom insert • Ultra long attachment : 8.7m arm + 2.4m boom insert
7,340 16,910
7,340
15,820

3,330
2,800
3,220
2,700
• Ultra long attachment : 8.7m arm 14,510

3,330
without boom insert

3,220

3,330
2,760
• Ultra long attachment : 6.1m arm
without boom insert

4,960 12,310 4,960 • Ultra long attachment : 6.1m arm + 3.5m boom insert 15,810

3,220
2,630

3,330
2,780
2,980
2,980

• Ultra long attachment : 6.1m arm 12,300

without boom insert
• Separate boom specification

3,330
3,330

2,700
3,220

2,980
2,870

13,350

• Separate boom specification 13,310

3,220
3,290

600 2,880 (2,380)

2,590 600

3,700

3,330
3,480 (2,980)
3,190 3,720

Disassembled dimensions and weight Unit: mm Disassembled dimensions and weight Unit: mm
Main body + base boom Main body + base boom (without counterweight) Main body + base boom + boom insert Main body + base boom Main body + base boom (without counterweight) Main body + base boom + 3.5m boom insert
7,340 7,120 10,750

7,340 7,120 10,770

3,330

3,330

3,330
Weight: 38,700 kg Weight: 28,500 kg Weight: 40,300 kg

3,220
3,220

3,220

Main body + base boom + 3.5m boom insert Main body + base boom + 2.4m boom insert Main body + base boom + 2.4m boom insert
(without counterweight) 10,530 9,660 (without counterweight) 9,440

3,330

3,330

3,330
Weight: 34,600 kg Weight: 25,100 kg Weight: 36,300 kg

Main body + base boom + boom insert Counterweight Ultra long attachment : 6.1m arm + 3.5m boom insert
(without counterweight) (including enclosed stand) Weight: 30,200 kg Weight: 40,100 kg Weight: 29,900 kg

Counterweight Case Counterweight Ultra long attachment : 8.7m arm + 2.4m boom insert
(including enclosed stand)
10,550 2,980 1,010 2,360 620
9,220 10,300
1,140

1,100
1,140

2,080
3,220

2,030

2,980 1,010 Weight: 3,220 kg Weight: 6,860 kg Overall width: 1,770 mm Weight: 8,450 kg

Ultra long attachment : 8.7m arm Ultra long attachment : 2.4m boom insert Ultra long attachment : 6.1m arm + 3.5m boom insert
Weight: 26,800 kg Weight: 9,460 kg Overall width: 1,770 mm Weight: 7,620 kg (including enclosed stand) (including optional stand) (including enclosed stand)
9,200 3,240 920 9,220
Ultra long attachment : 6.1m arm Ultra long attachment : 3.5m boom insert Separate boom
(including enclosed stand) (including optional stand) (including enclosed stand)

2,030
2,080

1,730

1,010
Overall width: 1,770 mm Weight: 7,040 kg Overall width: 1,770 mm Weight: 1,650 kg Overall width: 1,770 mm Weight: 7,620 kg
6,590 4,310 920 8,850
Ultra long attachment : 6.1m arm Ultra long attachment : 3.5m boom insert Separate boom
850

(including enclosed stand) (including optional stand) (including enclosed stand)

2,200

2,980
1,910

6,590 4,340 920 8,800

1,190

2,030

1,910

2,710
1,190
Overall width: 1,770 mm Weight: 5,930 kg Overall width: 1,770 mm Weight: 1,960 kg Overall width: 1,770 mm Weight: 6,680 kg Overall width: 1,770 mm Weight: 5,930 kg Overall width: 1,770 mm Weight: 1,960 kg Overall width: 1,850 mm Weight: 6,680 kg

13 14
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Dimensions Lifting Capacity

Dimensions (main body + base boom) Unit: mm Assembled machine dimensions Unit: mm
Rating over front
• Ultra long attachment : 8.7m arm + 3.5m boom insert
A – Reach from swing centerline to arm tip
19,890
8,180 B – Arm bucket pin height above/below ground
Rating over side or 90 degrees C – Lifting capacities in kilograms

3,500
3,030
• Ultra long attachment : 8.7m arm 16,380

3,500
without boom insert
SK350DLC Boom: Separate boom Arm: 3.3 m Bucket: without Shoe: 600 mm (Heavy Lift)
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. Reach

3,500
2,970
Radius
B
13.5 m kg *13,100 *13,100 2.88 m
12.0 m kg *10,860 *10,860 *7,190 *7,190 *7,630 *7,630 6.41 m
5,450 • Ultra long attachment : 6.1m arm + 3.5m boom insert 19,890 10.5 m kg *9,380 *9,380 *9,560 *9,560 *5,930 *5,930 *6,240 6,240 8.31 m
9.0 m kg *8,530 *8,530 *9,510 *9,510 *5,180 *5,180 *5,290 *5,290 *5,570 4,700 9.61 m
7.5 m kg *9,680 *9,680 *10,480 *10,480 *7,770 7,590 *5,060 *5,060 *5,210 3,900 *5,200 3,850 10.53 m

3,500
3,030
2,980 6.0 m kg *16,120 *16,120 *11,590 10,080 *9,120 7,080 *5,090 *5,090 *4,960 3,880 *5,000 3,350 11.18 m
4.5 m kg *13,850 *13,850 *15,610 14,760 *11,480 8,830 *10,000 6,460 *5,640 4,870 *5,080 3,730 *4,920 3,040 11.60 m
3.0 m kg *10,780 *10,780 *13,520 8,040 10,270 5,890 7,850 4,540 *5,440 3,550 *4,940 2,880 11.82 m
• Ultra long attachment : 6.1m arm 16,380 1.5 m kg *8,620 *8,620 *11,970 7,460 9,810 5,480 7,570 4,280 *5,910 3,410 *5,060 2,850 11.84 m
without boom insert G.L. kg *9,300 *9,300 *8,260 *8,260 *10,630 7,220 9,590 5,290 7,400 4,130 5,970 3,330 *5,210 2,920 11.67 m
-1.5 m kg *9,480 *9,480 *8,270 *8,270 *11,440 7,320 9,580 5,280 7,380 4,100 5,990 3,360 *5,030 3,130 11.29 m
3,490

-3.0 m kg *17,450 *17,450 *14,890 *14,890 *12,860 12,050 *9,010 7,540 *8,070 5,410 *6,720 4,210 *4,790 3,540 *3,900 3,550 10.58 m

3,500
2,970
-4.5 m kg *21,280 *21,280 *13,160 12,500 *9,280 7,880 *7,130 5,670 *5,860 4,490 *4,730 4,420 9.27 m
-6.0 m kg *13,860 13,410 *9,920 8,590 *7,580 *7,580 6.52 m

• Separate boom specification 14,520

2,880 (2,380)
600 SK400DLC Boom: Separate boom Arm: 3.3 m Bucket: without Shoe: 600 mm (Heavy Lift)
4,000

3,500
3,480 (2,980)
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. Reach
3,720 Radius
B
13.5 m kg *13,090 *13,090 3.19 m
Disassembled dimensions and weight Unit: mm
12.0 m kg *11,000 *11,000 *7,850 *7,850 *7,620 *7,620 6.53 m
10.5 m kg *8,750 *8,750 *9,860 *9,860 *6,220 *6,220 *6,240 *6,240 8.40 m
Main body + base boom Main body + base boom (without counterweight) Counterweight Case 9.0 m kg *8,530 *8,530 *9,530 *9,530 *7,210 *7,210 *7,790 7,230 *5,570 *5,570 9.66 m
7.5 m kg *9,850 *9,850 *10,480 *10,480 *8,630 *8,630 *5,550 *5,550 *5,670 5,220 *5,200 5,170 10.57 m
8,180 7,790 6.0 m kg *16,420 *16,420 *11,910 *11,910 *9,410 9,150 *9,050 6,810 *5,480 5,210 *5,000 4,570 11.21 m
2,980 980
4.5 m kg *13,840 *13,840 *16,330 *16,330 *11,960 11,670 *10,490 8,510 *7,430 6,550 7,190 5,070 *4,920 4,220 11.62 m
3.0 m kg *12,300 *12,300 *13,980 10,980 *11,250 7,960 8,840 6,180 *5,440 4,880 *4,940 4,040 11.82 m
3,500

3,500

1,270

1.5 m kg *8,640 *8,640 *12,320 10,320 11,070 7,570 8,540 5,900 6,850 4,740 *5,050 4,000 11.83 m
G.L. kg *9,300 *9,300 *8,360 *8,360 *12,190 10,090 10,880 7,390 8,380 5,750 6,780 4,670 *5,280 4,090 11.65 m
-1.5 m kg *9,730 *9,730 *8,270 *8,270 *12,190 10,160 *10,560 7,340 8,350 5,730 6,800 4,690 *5,140 4,350 11.26 m
-3.0 m kg *17,440 *17,440 *15,260 *15,260 *14,310 *14,310 *10,130 *10,130 *9,070 7,470 *6,920 5,830 *4,910 4,860 *4,910 4,850 10.52 m
Weight: 50,700 kg Weight: 39,500 kg Weight: 4,810 kg -4.5 m kg *21,660 *21,660 *14,120 *14,120 *9,970 *9,970 *8,060 7,740 *6,000 *6,000 *5,890 *5,890 9.17 m
Counterweight Ultra long attachment : 8.7m arm + 3.5m boom insert Ultra long attachment : 8.7m arm -6.0 m kg *14,100 *14,100 *10,390 *10,390 *9,290 *9,290 6.21 m
(including enclosed stand) (including enclosed stand)
2,490 590
9,220 9,190

SK550DLC Boom: Separate boom Arm: 3.45 m Bucket: without Shoe: 600 mm (Heavy Lift)
1,230

2,030

2,030

A 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m At Max. Reach

Radius
B
Weight: 6,260 kg Overall width: 1,770 mm Weight: 8,120 kg Overall width: 1,770 mm Weight: 6,440 kg 13.5 m kg *14,010 *14,010 5.94 m
Ultra long attachment : 6.1m arm + 3.5m boom insert Ultra long attachment : 6.1m arm Ultra long attachment : 3.5m boom insert 12.0 m kg *11,980 *11,980 *10,650 *10,650 *11,080 *11,080 8.19 m
(including enclosed stand) (including enclosed stand) (including optional stand) 10.5 m kg *11,690 *11,690 *8,810 *8,810 *9,290 *9,290 *9,590 8,360 9.69 m
9.0 m kg *9,870 *9,870 *11,460 *11,460 *8,770 *8,770 *8,580 *8,580 *8,690 7,270 *8,720 6,820 10.78 m
9,220 6,590 4,340 930 7.5 m kg *15,640 *15,640 *11,110 *11,110 *8,400 *8,400 *7,990 *7,990 *8,250 7,200 *8,110 5,890 11.57 m
6.0 m kg *15,000 *15,000 *11,340 *11,340 *9,460 *9,460 *8,210 *8,210 *8,220 7,070 *7,750 5,450 *7,650 5,310 12.13 m
4.5 m kg *14,210 *14,210 *12,110 *12,110 *9,900 *9,900 *8,850 8,650 *8,440 6,820 *7,710 5,390 *7,240 4,960 12.47 m
2,030

2,030

1,910

1,190

3.0 m kg *8,390 *8,390 *12,770 *12,770 *11,190 10,170 *9,600 8,100 *8,640 6,430 *7,570 5,210 *6,850 4,780 12.63 m
1.5 m kg *7,570 *7,570 *8,510 *8,510 *12,250 9,870 *10,270 7,640 *8,780 6,200 *7,240 5,100 *6,420 4,750 12.60 m
G.L. kg *7,930 *7,930 *8,370 *8,370 *11,820 9,510 *9,940 7,450 *8,230 6,040 *6,770 5,080 *5,900 4,870 12.40 m
Overall width: 1,770 mm Weight: 7,620 kg Overall width: 1,770 mm Weight: 5,930 kg Overall width: 1,770 mm Weight: 1,960 kg -1.5 m kg *10,470 *10,470 *7,820 *7,820 *11,390 *11,390 *11,000 9,560 *9,030 7,420 *7,360 6,040 *5,220 5,160 12.00 m
-3.0 m kg *17,640 *17,640 *15,530 *15,530 *10,760 *10,760 *9,040 *9,040 *7,720 7,530 *6,510 6,190 *5,180 *5,180 11.23 m
Ultra long attachment : 3.5m boom adapter Separate boom
-4.5 m kg *26,160 *26,160 *15,920 *15,920 *11,530 *11,530 *8,560 *8,560 *7,100 *7,100 *6,300 *6,300 9.82 m
(including optional stand) (including enclosed stand)
-6.0 m kg *16,800 *16,800 *11,850 *11,850 *10,100 *10,100 6.93 m
9,420
4,340 970 Notes:
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
2,850
2,160

3. Arm bucket pin, without bucket is defined as lift point.

1,190

4. The above lifting capacities are in compliance with SAE J/ISO 10567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machines as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
7. Use this machine in the following applications. In specification for ultra long attachment type ,demolition work . In specification for separate boom type , demolition work & loading work. Never use the machine for any purpose other than the above applications.
Overall width: 1,850 mm Weight: 2,060 kg Overall width: 1,850 mm Weight: 8,680 kg 8. Please read carefully the manual before using machine.

15 16
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Dimensions Lifting Capacity

Dimensions (main body + base boom) Unit: mm Assembled machine dimensions Unit: mm
Rating over front
• Ultra long attachment : 8.7m arm + 3.5m boom insert
A – Reach from swing centerline to arm tip
19,890
8,180 B – Arm bucket pin height above/below ground
Rating over side or 90 degrees C – Lifting capacities in kilograms

3,500
3,030
• Ultra long attachment : 8.7m arm 16,380

3,500
without boom insert
SK350DLC Boom: Separate boom Arm: 3.3 m Bucket: without Shoe: 600 mm (Heavy Lift)
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. Reach

3,500
2,970
Radius
B
13.5 m kg *13,100 *13,100 2.88 m
12.0 m kg *10,860 *10,860 *7,190 *7,190 *7,630 *7,630 6.41 m
5,450 • Ultra long attachment : 6.1m arm + 3.5m boom insert 19,890 10.5 m kg *9,380 *9,380 *9,560 *9,560 *5,930 *5,930 *6,240 6,240 8.31 m
9.0 m kg *8,530 *8,530 *9,510 *9,510 *5,180 *5,180 *5,290 *5,290 *5,570 4,700 9.61 m
7.5 m kg *9,680 *9,680 *10,480 *10,480 *7,770 7,590 *5,060 *5,060 *5,210 3,900 *5,200 3,850 10.53 m

3,500
3,030
2,980 6.0 m kg *16,120 *16,120 *11,590 10,080 *9,120 7,080 *5,090 *5,090 *4,960 3,880 *5,000 3,350 11.18 m
4.5 m kg *13,850 *13,850 *15,610 14,760 *11,480 8,830 *10,000 6,460 *5,640 4,870 *5,080 3,730 *4,920 3,040 11.60 m
3.0 m kg *10,780 *10,780 *13,520 8,040 10,270 5,890 7,850 4,540 *5,440 3,550 *4,940 2,880 11.82 m
• Ultra long attachment : 6.1m arm 16,380 1.5 m kg *8,620 *8,620 *11,970 7,460 9,810 5,480 7,570 4,280 *5,910 3,410 *5,060 2,850 11.84 m
without boom insert G.L. kg *9,300 *9,300 *8,260 *8,260 *10,630 7,220 9,590 5,290 7,400 4,130 5,970 3,330 *5,210 2,920 11.67 m
-1.5 m kg *9,480 *9,480 *8,270 *8,270 *11,440 7,320 9,580 5,280 7,380 4,100 5,990 3,360 *5,030 3,130 11.29 m
3,490

-3.0 m kg *17,450 *17,450 *14,890 *14,890 *12,860 12,050 *9,010 7,540 *8,070 5,410 *6,720 4,210 *4,790 3,540 *3,900 3,550 10.58 m

3,500
2,970
-4.5 m kg *21,280 *21,280 *13,160 12,500 *9,280 7,880 *7,130 5,670 *5,860 4,490 *4,730 4,420 9.27 m
-6.0 m kg *13,860 13,410 *9,920 8,590 *7,580 *7,580 6.52 m

• Separate boom specification 14,520

2,880 (2,380)
600 SK400DLC Boom: Separate boom Arm: 3.3 m Bucket: without Shoe: 600 mm (Heavy Lift)
4,000

3,500
3,480 (2,980)
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. Reach
3,720 Radius
B
13.5 m kg *13,090 *13,090 3.19 m
Disassembled dimensions and weight Unit: mm
12.0 m kg *11,000 *11,000 *7,850 *7,850 *7,620 *7,620 6.53 m
10.5 m kg *8,750 *8,750 *9,860 *9,860 *6,220 *6,220 *6,240 *6,240 8.40 m
Main body + base boom Main body + base boom (without counterweight) Counterweight Case 9.0 m kg *8,530 *8,530 *9,530 *9,530 *7,210 *7,210 *7,790 7,230 *5,570 *5,570 9.66 m
7.5 m kg *9,850 *9,850 *10,480 *10,480 *8,630 *8,630 *5,550 *5,550 *5,670 5,220 *5,200 5,170 10.57 m
8,180 7,790 6.0 m kg *16,420 *16,420 *11,910 *11,910 *9,410 9,150 *9,050 6,810 *5,480 5,210 *5,000 4,570 11.21 m
2,980 980
4.5 m kg *13,840 *13,840 *16,330 *16,330 *11,960 11,670 *10,490 8,510 *7,430 6,550 7,190 5,070 *4,920 4,220 11.62 m
3.0 m kg *12,300 *12,300 *13,980 10,980 *11,250 7,960 8,840 6,180 *5,440 4,880 *4,940 4,040 11.82 m
3,500

3,500

1,270

1.5 m kg *8,640 *8,640 *12,320 10,320 11,070 7,570 8,540 5,900 6,850 4,740 *5,050 4,000 11.83 m
G.L. kg *9,300 *9,300 *8,360 *8,360 *12,190 10,090 10,880 7,390 8,380 5,750 6,780 4,670 *5,280 4,090 11.65 m
-1.5 m kg *9,730 *9,730 *8,270 *8,270 *12,190 10,160 *10,560 7,340 8,350 5,730 6,800 4,690 *5,140 4,350 11.26 m
-3.0 m kg *17,440 *17,440 *15,260 *15,260 *14,310 *14,310 *10,130 *10,130 *9,070 7,470 *6,920 5,830 *4,910 4,860 *4,910 4,850 10.52 m
Weight: 50,700 kg Weight: 39,500 kg Weight: 4,810 kg -4.5 m kg *21,660 *21,660 *14,120 *14,120 *9,970 *9,970 *8,060 7,740 *6,000 *6,000 *5,890 *5,890 9.17 m
Counterweight Ultra long attachment : 8.7m arm + 3.5m boom insert Ultra long attachment : 8.7m arm -6.0 m kg *14,100 *14,100 *10,390 *10,390 *9,290 *9,290 6.21 m
(including enclosed stand) (including enclosed stand)
2,490 590
9,220 9,190

SK550DLC Boom: Separate boom Arm: 3.45 m Bucket: without Shoe: 600 mm (Heavy Lift)
1,230

2,030

2,030

A 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m At Max. Reach

Radius
B
Weight: 6,260 kg Overall width: 1,770 mm Weight: 8,120 kg Overall width: 1,770 mm Weight: 6,440 kg 13.5 m kg *14,010 *14,010 5.94 m
Ultra long attachment : 6.1m arm + 3.5m boom insert Ultra long attachment : 6.1m arm Ultra long attachment : 3.5m boom insert 12.0 m kg *11,980 *11,980 *10,650 *10,650 *11,080 *11,080 8.19 m
(including enclosed stand) (including enclosed stand) (including optional stand) 10.5 m kg *11,690 *11,690 *8,810 *8,810 *9,290 *9,290 *9,590 8,360 9.69 m
9.0 m kg *9,870 *9,870 *11,460 *11,460 *8,770 *8,770 *8,580 *8,580 *8,690 7,270 *8,720 6,820 10.78 m
9,220 6,590 4,340 930 7.5 m kg *15,640 *15,640 *11,110 *11,110 *8,400 *8,400 *7,990 *7,990 *8,250 7,200 *8,110 5,890 11.57 m
6.0 m kg *15,000 *15,000 *11,340 *11,340 *9,460 *9,460 *8,210 *8,210 *8,220 7,070 *7,750 5,450 *7,650 5,310 12.13 m
4.5 m kg *14,210 *14,210 *12,110 *12,110 *9,900 *9,900 *8,850 8,650 *8,440 6,820 *7,710 5,390 *7,240 4,960 12.47 m
2,030

2,030

1,910

1,190

3.0 m kg *8,390 *8,390 *12,770 *12,770 *11,190 10,170 *9,600 8,100 *8,640 6,430 *7,570 5,210 *6,850 4,780 12.63 m
1.5 m kg *7,570 *7,570 *8,510 *8,510 *12,250 9,870 *10,270 7,640 *8,780 6,200 *7,240 5,100 *6,420 4,750 12.60 m
G.L. kg *7,930 *7,930 *8,370 *8,370 *11,820 9,510 *9,940 7,450 *8,230 6,040 *6,770 5,080 *5,900 4,870 12.40 m
Overall width: 1,770 mm Weight: 7,620 kg Overall width: 1,770 mm Weight: 5,930 kg Overall width: 1,770 mm Weight: 1,960 kg -1.5 m kg *10,470 *10,470 *7,820 *7,820 *11,390 *11,390 *11,000 9,560 *9,030 7,420 *7,360 6,040 *5,220 5,160 12.00 m
-3.0 m kg *17,640 *17,640 *15,530 *15,530 *10,760 *10,760 *9,040 *9,040 *7,720 7,530 *6,510 6,190 *5,180 *5,180 11.23 m
Ultra long attachment : 3.5m boom adapter Separate boom
-4.5 m kg *26,160 *26,160 *15,920 *15,920 *11,530 *11,530 *8,560 *8,560 *7,100 *7,100 *6,300 *6,300 9.82 m
(including optional stand) (including enclosed stand)
-6.0 m kg *16,800 *16,800 *11,850 *11,850 *10,100 *10,100 6.93 m
9,420
4,340 970 Notes:
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
2,850
2,160

3. Arm bucket pin, without bucket is defined as lift point.

1,190

4. The above lifting capacities are in compliance with SAE J/ISO 10567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machines as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
7. Use this machine in the following applications. In specification for ultra long attachment type ,demolition work . In specification for separate boom type , demolition work & loading work. Never use the machine for any purpose other than the above applications.
Overall width: 1,850 mm Weight: 2,060 kg Overall width: 1,850 mm Weight: 8,680 kg 8. Please read carefully the manual before using machine.

15 16
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Working Ranges

Unit: mm Unit: mm Unit: mm

Ultra long attachment specification : 6.1m arm Ultra long attachment specification : 8.7m arm Ultra long attachment specification : 6.1m arm Ultra long attachment specification : 8.7m arm
15,620 14,620
13,120 14,120
15,120 14,120 15,120 14,120 18,090 17,090
Max. operation reach (front swing) 13,000 12,000
12,620 11,620 12,620 11,620 16,090 15,090
Max. operation reach (side swing) 10,500 11,500
Max. operation reach (front swing) 12,500 11,500 4,240 3,990 Max. operation reach (front swing) 12,500 11,500 Max. operation reach (front swing) 15,500 14,500
2,940 2,680 Max. operation reach (side swing) 13,500 12,500
Max. operation reach (side swing) 10,000 9,000 Max. operation reach (side swing) 10,000 9,000 4,480 4,120
3,520 3,150 28m 3,520 3,150
3,200 2,840
2,820 2,450 2,820 2,450
26 30m
26m 26m
28
24 24 24
26
22 22 22
24
20 20 20
22

18 18 18 20

16 16 16 18
23,610 20,130

23,730 20,250
27,360 22,350

30,120 26,640
14 14 14 16
20,990 17,510

21,110 17,630
24,740 22,350
14
12 12 12

27,530 24,040
12
10 10 10

18,100 14,620
14,120 10,640

14,230 10,750
15,320 12,940

10
8 8 8
8
2,700 2,630

2,780 2,700
2,800 2,760

6 6 6

3,030 2,970
6
4 4 4
4

18m 16 14 12 10 8 6 4 2 18m 16 14 12 10 8 6 4 2 18m 16 14 12 10 8 6 4 2 18m 16 14 12 10 8 6 4 2

15,820 12,310 16,910 14,510 15,810 12,300 19,890 16,380
Red: With 3.5m boom insert Red: With 2.4m boom insert Red: With 3.5m boom insert Red: With 3.5m boom insert
Blue: Without boom insert Blue: Without boom insert Blue: Without boom insert Blue: Without boom insert

Separate boom specification Separate boom specification Separate boom specification Ultra long attachment specification : 6.1m arm
18,090 17,090
13,060 13,060
15,500 14,500
11,850 11,850 14,360
Max. operation reach (front swing) 15,090 14,090
11,260 11,260 12,360
Max. operation reach (side swing) 12,500 11,500
10,200 10,200 11,200 3,880 3,520
8,400 8,400 9,200 3,200 2,840
3,470 3,470 3,600 28m
2,460 2,460 2,690
26
18m 18m 18m

16 24
16 16

14 14 14 22

12 20
12 12

10 10 10 18

17,780
16,420

16,530

8 8 8 16

27,580 24,100
14,620
13,560

13,680

14

12,760
11,630

11,740

6 6 6

24,990 21,510
4 4 4 12

18,100 14,620
10

3,030 2,970
6
2 2 2
6,260
6,320

6,210

4
4 4 4
9,420
9,180

9,070

6 6 6

8 8 8 18m 16 14 12 10 8 6 4 2
19,890 16,380
10m 10m 10m
16m 14 12 10 8 6 4 2 16m 14 12 10 8 6 4 2 16m 14 12 10 8 6 4 2 Red: With 3.5m boom insert
Blue: Without boom insert

17 18
 Specifications SK350DLC-10 SK400DLC-10 SK550DLC-10

Working Ranges

Unit: mm Unit: mm Unit: mm

Ultra long attachment specification : 6.1m arm Ultra long attachment specification : 8.7m arm Ultra long attachment specification : 6.1m arm Ultra long attachment specification : 8.7m arm
15,620 14,620
13,120 14,120
15,120 14,120 15,120 14,120 18,090 17,090
Max. operation reach (front swing) 13,000 12,000
12,620 11,620 12,620 11,620 16,090 15,090
Max. operation reach (side swing) 10,500 11,500
Max. operation reach (front swing) 12,500 11,500 4,240 3,990 Max. operation reach (front swing) 12,500 11,500 Max. operation reach (front swing) 15,500 14,500
2,940 2,680 Max. operation reach (side swing) 13,500 12,500
Max. operation reach (side swing) 10,000 9,000 Max. operation reach (side swing) 10,000 9,000 4,480 4,120
3,520 3,150 28m 3,520 3,150
3,200 2,840
2,820 2,450 2,820 2,450
26 30m
26m 26m
28
24 24 24
26
22 22 22
24
20 20 20
22

18 18 18 20

16 16 16 18
23,610 20,130

23,730 20,250
27,360 22,350

30,120 26,640
14 14 14 16
20,990 17,510

21,110 17,630
24,740 22,350
14
12 12 12

27,530 24,040
12
10 10 10

18,100 14,620
14,120 10,640

14,230 10,750
15,320 12,940

10
8 8 8
8
2,700 2,630

2,780 2,700
2,800 2,760

6 6 6

3,030 2,970
6
4 4 4
4

18m 16 14 12 10 8 6 4 2 18m 16 14 12 10 8 6 4 2 18m 16 14 12 10 8 6 4 2 18m 16 14 12 10 8 6 4 2

15,820 12,310 16,910 14,510 15,810 12,300 19,890 16,380
Red: With 3.5m boom insert Red: With 2.4m boom insert Red: With 3.5m boom insert Red: With 3.5m boom insert
Blue: Without boom insert Blue: Without boom insert Blue: Without boom insert Blue: Without boom insert

Separate boom specification Separate boom specification Separate boom specification Ultra long attachment specification : 6.1m arm
18,090 17,090
13,060 13,060
15,500 14,500
11,850 11,850 14,360
Max. operation reach (front swing) 15,090 14,090
11,260 11,260 12,360
Max. operation reach (side swing) 12,500 11,500
10,200 10,200 11,200 3,880 3,520
8,400 8,400 9,200 3,200 2,840
3,470 3,470 3,600 28m
2,460 2,460 2,690
26
18m 18m 18m

16 24
16 16

14 14 14 22

12 20
12 12

10 10 10 18

17,780
16,420

16,530

8 8 8 16

27,580 24,100
14,620
13,560

13,680

14

12,760
11,630

11,740

6 6 6

24,990 21,510
4 4 4 12

18,100 14,620
10

3,030 2,970
6
2 2 2
6,260
6,320

6,210

4
4 4 4
9,420
9,180

9,070

6 6 6

8 8 8 18m 16 14 12 10 8 6 4 2
19,890 16,380
10m 10m 10m
16m 14 12 10 8 6 4 2 16m 14 12 10 8 6 4 2 16m 14 12 10 8 6 4 2 Red: With 3.5m boom insert
Blue: Without boom insert

17 18
Standard / Optional Equipment SK350DLC-10 SK400DLC-10 SK550DLC-10

STANDARD EQUIPMENT Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for specifics.

ENGINE CAB & CONTROL

SK350DLC / SK400DLC Tilt cab
Turbocharged and inter-cooled HINO J08EVV-KSDK Tier IV Final Diesel engine Demolition special cab
Automatic engine deceleration Electric horn

Demolition Machine
Auto Idle Stop (AIS) All-weather, sound-insulated cab
Batteries (2 x 12V - 96Ah) P5A glass
Starting motor (24V - 5 kW), 60 amp alternator Easy to read multi-display monitor
Removable radiator clean-out screen Automatic climate control
Automatic engine shut-down if low engine oil pressure Defroster
Side by side oil, hydraulic and engine radiators Air suspension seat with heater
Double-element air cleaner Headrest
Refueling pump Bluetooth installed radio (AM/FM Stereo with speakers)
Luggage tray
SK550DLC
Large cup holder
Engine, HINO P11C-VN, diesel engine with turbocharger and intercooler Detachable two-piece floor mat
Automatic engine deceleration Handrails
Auto Idle Stop (AIS) Wiper (top and front window)
Batteries (2 x 12V - 176Ah) Emergency escape hammer
Starting motor (24V - 5 kW), 60 amp alternator Attachment pressure release switch
Automatic engine shut-down for low engine oil pressure Manual DPF regeneration switch
Engine oil pan drain cock 12 V converter
Double element air cleaner Tip-over warning device
Refueling pump Cab interference prevention system
CONTROL Boom & arm & jib cylinder holding valves
Working mode selector (H-mode, S-mode and ECO-mode) Slow return check valves
Power Boost (only separate boom specification) 9mm thick swivel guard
6mm thick upper frame under cover guards
HYDRAULIC Auto lubrication system
Auto warm-up system Rotation and N&B auxiliary circuits and piping
Hydraulic oil cooler Stand for Ultra long and Separate Attachment
Hydraulic oil filter condition indicator Falling object deflector
Hydraulic oil for cold climates One way call
Quick hitch piping Remote machine monitoring system “KOMEXS”
Multi-coupler (QH line x 2, rotation line x 2, jib & arm pilot line x 2, drain x 1) Additional tool box (SK400DLC / SK550DLC)

SWING SYSTEM & TRAVEL SYSTEM Cab tilt operation alarm

Swing rebound prevention system Cab emergency lowering device
Two-speed travel with automatic down shift Crosspiece for operator safety in cab
Sealed & lubricated track links Console tilt
600mm shoes Cab tilt maintenance stopper
Grease-type track adjusters Battery shut-off
Automatic swing brake
Hydraulic retractable crawler

MIRRORS, LIGHTS & CAMERAS

Two rearview mirrors
Rear-view camera
Three front working lights (1 on upper carriage, 2 on cab)
Attachment front work light (separate boom: 2, ultra long attachment: 2)
Right side camera, additional monitor
Cab foot light
Cab foot mirror

OPTIONAL EQUIPMENT
Stand for 3.5m (2.4m) insert and 3.5m adapter
Extended guard rail (SK350DLC / SK400DLC)
Additional track guides
Full track guides
Travel alarm
Pin removal equipment
Water spray for separate boom and ultra long attachment
Additional tool box (only SK350DLC)

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications
that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
Veluwezoom 15
1327 AE Almere
The Netherlands
www.kobelco-europe.com

October 2018 | POD0131