Samsung p2070 p2270 p2370 CH - Ls20efh Ls22efh Ls23efh LCD Monitor

LCD-Monitor
Chassis : LS20EFH
LS22EFH
LS23EFH
Model : P2070
P2270
P2370
SERVICE Manual
TFT-LCD Monitor Contens
1. Precautions
2. Product specifications
3. Disassembly and Reassemble
4. Troubleshooting
5. Exploded View & Part List
6. Wiring Diagram
7. Schematic Diagram
P2070 / P2270 / P2370
Refer to the service manual in the GSPN (see the rear cover) for the more information.
Contents
1. Precautions............................................................................................................... 1-1
1-1. Safety Precautions.......................................................................................................... 1-1
1-2. Servicing Precautions...................................................................................................... 1-2
1-3. Static Electricity Precautions........................................................................................... 1-2
1-4. Installation Precautions................................................................................................... 1-3
2. Product specifications............................................................................................. 2-1
2-1. Feature & Specifications.................................................................................................. 2-1
2-2. Spec Comparison to the Old Models............................................................................... 2-3
2-3. Accessories..................................................................................................................... 2-4
3. Disassembly and Assembly.................................................................................... 3-1
3-1. Disassembly.................................................................................................................... 3-1
4. Troubleshooting....................................................................................................... 4-1
4-1. Troubleshooting............................................................................................................... 4-1
4-2. When the power does Not Turn on.................................................................................. 4-2
4-3. When the screen is blank (Analog).................................................................................. 4-4
4-4. When a blank screen is displayed (Digital)...................................................................... 4-7
4-5. Error Examples and Actions.......................................................................................... 4-10
4-6. Adjustment..................................................................................................................... 4-11
5. Exploded View & Part List....................................................................................... 5-1
5-1. Exploded View (P2070)................................................................................................... 5-1
5-2. Parts List (P2070)............................................................................................................ 5-3
5-3. Exploded View (P2270)................................................................................................. 5-11
5-4. Parts List (P2270).......................................................................................................... 5-13
5-5. Exploded View (P2370)................................................................................................. 5-21
5-6. Parts List (P2370).......................................................................................................... 5-23
6. Wiring Diagram......................................................................................................... 6-1
6-1. Wiring Diagram - Main Board.......................................................................................... 6-1
6-2. Wiring Diagram - IP Board............................................................................................... 6-2
6-3. Connector Functions....................................................................................................... 6-3
6-4. Cables............................................................................................................................. 6-3
7. Schematic Diagram.................................................................................................. 7-1
7-1. Circuit Descriptions.......................................................................................................... 7-1
7-2. Schematic Diagrams (Power Flowchart)......................................................................... 7-2
7-3. Schematic Diagrams (Scaler Part).................................................................................. 7-3
7-4. Schematic Diagrams (IP Board)...................................................................................... 7-4
7-5. Schematic Diagrams (Main PBA)................................................................................... 7-5
GSPN (Global Service Partner Network)
Area Web Site
North America http://service.samsungportal.com
Latin America http://latin.samsungportal.com
CIS http://cis.samsungportal.com
Europe http://europe.samsungportal.com
China http://china.samsungportal.com
Asia http://asia.samsungportal.com
Mideast & Africa http://mea.samsungportal.com
© 2009 Samsung Electronics Co.,Ltd.

This Service Manual is a property of Samsung Electronics Co.,Ltd.
All rights reserved.
Any unauthorized use of Manual can be punished under applicable
Printed in Korea
International and/or domestic law.
P/N: BN82-00523A-00
1. Precautions
1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
1. For continued safety, do not attempt to modify the circuit board.
2. Disconnect the AC power and DC power jack before servicing.
1-1-2. Servicing the LCD Monitor

1. When servicing the LCD Monitor, Disconnect the AC line cord from the AC outlet.
2. It is essential that service technicians have an accurate voltage meter available at all times. Check the calibration of
this meter periodically.
1-1-3. Fire and Shock Hazard

Before returning the monitor to the user, perform the following safety checks:
1. Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the
chassis and other metal parts in the monitor.
2. Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and
compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.
3. Leakage Current Hot Check (Figure 1-1):
WARNING : Do not use an isolation transformer during this test.
Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI
C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).
(READING SHOULD)
NOT BE ABOVE 0.5mA
LEAKAGE
DEVICE
CURRENT
UNDER
TESTER
TEST
TEST ALL
EXPOSED METAL
SURFACES
2-WIRE CORD
*ALSO TEST WITH

PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
EARTH
GROUND
Figure 1-1. Leakage Current Test Circuit
4. With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch
first in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit,
etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.
1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual
inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,
wattage, etc. Parts that have special safety characteristics are identified by on schematics and parts lists. A substitute
replacement that does not have the same safety characteristics as the recommended replacement part might create
shock, fire and/or other hazards. Product safety is under review continuously and new instructions are issued whenever
appropriate.
1-1
1. Precautions
1-2. Servicing Precautions

WARNING: An electrolytic capacitor installed with the wrong polarity might explode.
Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of
this manual.
Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.
1-2-1 General Servicing Precautions

1. Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before
attempting to:
(a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test
component in parallel with an electrolytic capacitor.
2. Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes
used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such
elements to their original position.
3. After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that
the area around the serviced part has not been damaged.
4. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels,
input terminals and earphone jacks).
5. Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON.
Connect an insulation resistance meter (500 V) to theblades of the AC plug.
The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be
greater than 1 megohm.
6. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead;
always remove the instrument’s ground lead last.
1-3. Static Electricity Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect
transistors. The following techniques will reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your
body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard,
be sure to remove the wrist strap before applying power to the monitor.
2. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent
accumulation of an electrostatic charge.
3. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESDs.
4. Use only a grounded-tip soldering iron to solder or desolder ESDs.
5. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static” can generate
electrical charges sufficient to damage ESDs.
6. Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs
are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive
materials.
7. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective
material to the chassis or circuit assembly into which the device will be installed.
Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together,
or lifting your foot from a carpeted floor can generate enough static electricity to damage an ESD.
1-2
1. Precautions
1-4. Installation Precautions

1. For safety reasons, more than two people are required for carrying the product.
2. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock.
3. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal
temperature may cause fire.
4. Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed
to moisture. Otherwise, it may cause a fire or electric shock.
5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric
shock.
6. Keep the antenna far away from any high-voltage cables and install it firmly. Contact with the highvoltage cable or the
antenna falling over may cause fire or electric shock.
7. When installing the product, leave enough space (10cm) between the product and the wall for ventilation purposes.
A rise in temperature within the product may cause fire.
1-3
1. Precautions
Memo
1-4
2-1. Feature & Specifications
Model P2070 / P2270 / P2370
Feature
� Panel Specification : 250cd/m2, 5ms(G to G 2ms), CR 1000:1(DCR 50000:1), 170/160

� DPMS : <1.0W(Typical), <1.2W(Max)
� Off-Timer function for reducing standby power usages
� Windows Vista authentication
� DVI with HDCP (dual model)
� Picture;a screen size desire
� Supported Color Effect: Black and white/Sepia/Aqua/Green
Specifications
Item Description
Models P2070 P2270 P2370
LCD Panel TFT-LCD panel, RGB TFT-LCD panel, RGB TFT-LCD panel, RGB
vertical stripe, normally vertical stripe, normally vertical stripe, normally
white transmissive, white transmissive, white transmissive,
20.0” Wide viewable 21.6” Wide viewable 23.0” Wide viewable
0.2768(H) x 0.2768(V) mm 0.248(H) X 0.248(V)mm 0.2655(H) x 0.2655(V) mm
pixel pitch pixel pitch. pixel pitch
Scanning Frequency Horizontal : Horizontal : Horizontal :
30KHz ~ 75KHz 30KHz ~ 75KHz 30KHz ~ 75KHz
Vertical: 56Hz ~ 61Hz Vertical: 56Hz ~ 61Hz Vertical: 56Hz ~ 61Hz
Display Colors 16.7 Million colors 16.7 Million colors 16.7 Million colors
Maximum resolution Horizontal: 1920 Pixels Horizontal: 1920 Pixels
Horizontal: 1600 Pixels
Vertical: 1080 Pixels Vertical: 1080 Pixels
Vertical: 900 Pixels (60Hz)
(60Hz) (60Hz)
Input Signal DVI-I with HDCP DVI-I with HDCP DVI-I with HDCP
Input Sync Signal Seperate H/V sync, Seperate H/V sync, Seperate H/V sync,
Composite H/V, Composite H/V, Composite H/V,
Sync-on-Green Sync-on-Green Sync-on-Green
Level: TTL level Level: TTL level Level: TTL level
Maximum Pixel Clock rate 164 MHz 164 MHz 164 MHz
Active Display
442.8(H) x 249.075(V) 477.504(H) X 268.596(V) 509.76(H) x 286.74(V)
(Horizontal/Vertical)
AC power voltage & AC 110V~130V, 60Hz & AC 110V~130V, 60Hz & AC 110V~130V, 60Hz &
Frequency AC, 200V~240V 50Hz AC, 200V~240V 50Hz AC, 200V~240V 50Hz
Power Consumption MAX 28W/Typical 26W Max 30W / Typical 28W MAX 32W/Typical 30W
Dimensions Set 500.0mm x 325.0mm x 536.3 x 403.0 x 189.5 mm 571.0mm x 423.0mm x
(W x D x H) 47.0 mm (Without Stand) (Without Stand) 190.5 mm (Without Stand)
500.0mm x 382.0mm x 536.3 x 345.2 x 49.6 mm 571.0mm x 364.5mm x
190.0 mm (With Stand) (With Stand) 47.0 mm (With Stand)
Weight Set 3.0kg(without stand) Set 3.3kg(without stand) Set 3.8kg(without stand)
(Set/Package) / 3.3kg(with stand) / / 3.6kg(with stand) / / 4.1kg(with stand) /
Package : 5.0kg Package : 5.3kg Package : 5.9kg
2-1
Specifications
Item Description
Models P2070 P2270 P2370
Environmental Considerations Operating Temperature: 10˚C ~ 50˚C(50˚F ~ 122˚F)
Operating Humidity : 10% ~ 90%
Operating Temperature: -20˚C ~ 45˚C(-4˚F ~ 113˚F)
Operating Humidity: 5% ~ 90%
Note: Designs and specifications are subject to change without prior notice.
2-2
2-2. Spec Comparison to the Old Models

Model ECOFIT(P2070 / P2270 / P2370) CREAM (2333SW)
Design
P2070 : 1600 x 900

Resolution 1920x1080
P2270/P2370 : 1920 x 1080
Input DVI-I with HDCP Analog / DVI digital with HDCP
Response Time 5ms(G to G 2ms) 5ms(W to B)
Viewing Angle 170/160(CR>10) 170/160(CR>10)
Brightness 250 cd/m2 300 cd/m²
Contrast 50000:1(DCR) 20000:1(DCR)
MagicBright 7 step 7 step
Magic Color Magic Color

Color Effect Color Effect
Feature Image Size Image Size
Magic Bright3 Magic Bright3
Magic Tune(Premium) Magic Tune (Premium)
*Color Effect
- Grey scale: Images are displayed in a grey tone on the screen.
- Green: Images are displayed in a green tone on the screen.
- Aqua: Images are displayed in a blue tone on the screen.
- Sepia: Images are displayed in a brown tone on the screen.
Image Size : If the resolution is not wide resolution, this option allows the screen size to be selected as normal or wide.
2-3
2-3. Accessories
Product Description Code. No Remark
Quick Setup Guide BN68-01650A
Warranty Card
BH68-00633B
(Not available in all locations)
User’s Guide,
Monitor Driver, BN96-09890A
Natural Color Pro Software
Stand Body BN96-09628A
Stand Base BN96-09629A
Samsung Electronics
Service center
CBF SIGNAL-DVI(I) to D-sub
BN39-00310D
1,500mm(1.5M)
Power Cord
3903-000085
1,830mm(1.8M)
Adator (12V/3V) BN44-00139A
Cleaning Cloth
BN63-02368B
160mm x 120mm
DVI Cable
BN39-00246L
1,500mm(1.5M)
2-4
3. Disassembly and Assembly

This section describes the disassembly and reassembly sequences for this monitor.
Warning: As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly
Caution: 1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Disassemble the monitor carefully as directed in the following procedures.
4. When assembling and disassembling the monitor, the gasket attached to the PCB may be detached
from the PCB. Therefore, make sure to check whether it is attached to the PCB correctly. If it is detached
from the PCB, make sure to reattach it.
Description Photo Screws

1. Place a soft cloth on the floor and place the
monitor on it so that the front of the monitor is on
the cloth.
Caution: If you do not tilt the stand and use too
much force to remove it, the connection
pin may break.
2. Hold one edge of the FRONT-COVER and push

it downwards to separate it.
3-1

3. Separate the other side in the same way.
4. Lift the REAR-COVER up to separate it.
5. Remove the LVDS(FFC Cable), LAMP wire,

Function cable.
LVDS
LAMP
WIRE
FUNCTION
6. Remove the LCD panel.
7. Remove the lead from the three (3) soldering

parts at the back of the PCB, as shown in the
figure.
Caution: When assembling and disassembling

the monitor, the gasket attached to the
PCB may be detached from the PCB.
Therefore, make sure to check whether
it is attached to the PCB correctly. If it is
detached from the PCB, make sure to
reattach it.
3-2

8. Remove the two (2) hexagonal screws, as shown
in the figure.
9. Lift the shield upwards and remove it.
10. Separate the Inverter, Main PBA .
11. Pulling over the direction of arrow as shown in

the figure.
3-3

12. Separate the Inverter, Main PBA and
SHIELD-MAIN.
13. HOLDER SUB-PCB.
※The assembly is in the reverse order of disassembly.
3-4
4. Troubleshooting
4. Troubleshooting
4-1. Troubleshooting
1. Set custom mode as follows before beginning a repair.
P2070 P2270/P2370
• Resolution: 1600 x 900 • Resolution: 1920 x 1080
• H-frequency: 60.000kHz • H-frequency: 67.500kHz
• V-frequency: 60.000Hz • V-frequency: 60.000Hz
2. If the screen is blank, check whether the power cord is connected correctly.
3. The circuits to check:
• When the raster does not appear: The Function PBA, Main PBA, Inverter, Adaptor
• When 5V is generated but a blank screen is displayed : Main PBA
• When 12V is not Generated : Adaptor
4. “Press the MENU button and hold down the, “ (Enter, Source)” button for more than five (5) seconds to return the monitor to
factory mode.
4-1
4. Troubleshooting
4-2. When the power does Not Turn on
- When turning on the power button after connecting Adaptor, the LED at the front of the monitor
Symptom
does not operate.
- Check the Adaptor power fuse and the Adaptor output power.
- Check the connections for Adaptor and the Main board inside the monitor.
Major checkpoints
- Check the Main board power part and also check whether there is any abnormal output at any of
the other output terminals
IC402
IC401
IC405
IC202
CN700
Yes Check the connection status for

the function ass’y.
Is DC12V measured at pins2 of the

CN700 connector when pins 1,3 are No
Replace the Adaptor.
0V?
Yes
Is DC5V measured at C222 when pin2 No Check the circuits related to

of IC202 is DC 12V? IC202.
Yes
Is DC3.3V measured at pin3 of the No Check the circuits related to

Diagnostics IC605.
IC605 when pin1 is DC 5V?
Yes

IC601 when pin1 is DC 5V? IC601.
Yes

IC602 when pin3 is DC 5V? IC602.
Yes
Check and replace the Adaptor.
Caution Make sure to disconnect the power before working on the Adaptor.
4-2
4. Troubleshooting
4-2-1. Circuit diagrams when the power does not turn on
4-3
4. Troubleshooting
4-3. When the screen is blank (Analog)
- Even though the LED power turns on, the screen is blank when connecting the DVI-I to D-sub
Symptom
cable.
- Check the DVI-I to D-sub cable connections.

Major checkpoints - Check whether the LVDS(FFC) cable is connected correctly to the panel.
- Check whether the lamp connector of the panel is connected correctly to the Inverter.
CN400
IC200
X201
CN700
Yes Check the signal cables and

their connections.
No Check and replace the circuits

① Is X201 oscillating correctly?
related to X201.
Yes
② Do the RGB inputs appear at R113, No Check the R113, R117 and
R117 and R120 of CN102? R120 input terminals.
Yes
Do the ③ Hsync and ④ Vsync No Check the circuits related to

waveforms appear at pins 32, 33 of IC200.
Diagnostics IC200, respectively?
Yes
Do output signals appear at pins 8 to 30 No Check the circuits related to

of CN400? CN400.
Yes
Is DC 5V measured at pins 1, 2 and 3 No Check the +5V_PANEL signal

of CN400? and the BL_EN signal.
Yes
Check and replace the panel.
4-4
4. Troubleshooting
4-3-1. When a blank screen is displayed (Analog)
4-5
4. Troubleshooting
4-3-2. Waveforms when no screen is displayed (Analog)
① ③
4-6
4. Troubleshooting
4-4. When a blank screen is displayed (Digital)
Symptom - Even though the LED power turns on, the screen is blank when connecting the DVI cable.
- Check the DVI cable connections.

Major checkpoints - Check whether the LVDS(FFC) cable is connected correctly to the panel.
- Check whether the lamp connector of the panel is connected correctly to the Inverter.
CN400
IC200
X201
CN700
Yes Check the signal cables and

their connections.
No Check and replace the circuits

① Is X201 oscillating correctly?
related to X201.
Yes
No Check the R100 to 105 input

② Do the RGB inputs appear at R100
terminals.
to R105 of CN102?
Yes
Diagnostics
Do output signals appear at pins 8 to 30 No Check the circuits related to
of CN400? CN400.
Yes
Is DC 5V measured at pins 1, 2 and 3 No Check the +5V_PANEL signal

of CN400? and the BL_EN signal.
Yes
Check and replace the Panel.
4-7
4. Troubleshooting
4-4-1. Circuit diagrams when a blank screen is displayed (Digital)
4-8
4. Troubleshooting
4-4-2. Waveforms when a blank screen is displayed (Digital)
1 2
4-9
4. Troubleshooting
4-5. Error Examples and Actions

Error Appearance Symptoms and Actions Remarks
Symptom: DVI signals are not recognized. *On how to input DDC, refer to the
training manual.
Cause: This error occurs because the PC cannot
recognize the mode information since the
DVI DDC is not input to the monitor.
Action: Input the DVI DDC.

Symptom: A full white screen is displayed regardless of * A Full White pattern is a feature of a
the signals when turning on the monitor. TN panel when no video signals are
supplied.
Cause: This error occurs when only lamp power
is supplied and the video signals are not
input to the panel due to an LVDS cable
connection error.
Action: Replace the LVDS cable or connect the

cable correctly so that the video signals can
be supplied to the panel.
Symptom: When connecting the DVD, noise occurs on
the screen.
Cause: The HDCP key is not inserted.
Action: Enter the HDCP key. (See page 4-17.)
4-10
4. Troubleshooting
4-6. Adjustment
4-6-1. Service Adjustment Conditions
1. Precautions before a Service Adjustment
1) Check whether the devices for the service adjustment are operating normally.
2) Secure a space that is sufficiently wide for disassembling the monitor.
3) Prepare a soft mat on which the monitor will be disassembled.
2. Entering Service Mode
Entering: Menu Brightness 0 Contrast 0 Hold down the Enter button for five (5) seconds.
Exiting: Power OFF Power ON
3. Basic Service Items to Perform after Replacing a Board

1) Check the PC color adjustment status.
2) Input DDC (input both of Analog and Digital).
3) Check whether the appropriate MCU code for the model is input.
4) Hard power the monitor off after entering service mode and performing a reset.
4. DDC EDIT Data Input
1) Use when updating the AD board code.
2) Download the WinDDC program, DDC Input program, and Hex and DDC files appropriate to the model through the
Quality Control department of Samsung Electronics. Install the jig and input the data, as shown in the figure.
Monitor needing
adjustment
MTI-2031
DDC Manger
Parallel
Connector
(25P Cable)
Connect Monitor
(Signal Cable)
4-11
4. Troubleshooting
4-6-2. Service Function Specifications

 Checking the Code Version
1. Check the MCU code version and checksum after entering SVC Mode.
2. Entering SVC Mode
- Adjust the Brightness and Contrast values to 0.
- Hold down the Enter button for five (5) seconds.
- The SVC Function OSD is displayed.
- To exit the SVC Function, turn the power off.
3. Safe Mode
- When the input signal is higher than the supported frequency of the product, safe mode gives users some time (one
minute) to change the video card settings to the Recommended Mode settings.
Panel information
Select the Auto Auto option

Select the PixelShift option.
Country
Scaler Vender
Micom version
Micom checksum
 Service Mode (Moving around)

1. Press the + button to move to other items.
4-12
4. Troubleshooting
2. Press the - button to change the setting to On or Off.
 When replacing the panel

After replacing the panel, move to the Panel item and hold down the Menu button for five (5) seconds.
The Ch. No is incremented by 1 and then both the On Time and Cycle are set to 0.
This number is incremented by 1.
4-13
4. Troubleshooting
 Inputting the DDC Data
- After exchange the Main Board, We use DDC manager and must complete downloading.
- Connecting is refer to below picture.
- MICOM can be updated with DDC manager.
Connect to parallel port DDC MANAGER Connect to MAIN board

CN102
- Connect DDC Manager Jig to P2070 / P2270 / P2370 with DVI-I to D-Sub cable and DVI cable.
- Execute Winddc.exe Program on PC.
- Click the Winddc icon.
1. Click the Open [F5] icon
2. Select Port #
-> Open a DDC file. (Ex) “P220SA.ddc” : Analog
3. Select the other Port # “P220SD.ddc” : Digital
4. Click Next (OK) button
4-14
4. Troubleshooting
5. Enter the serial number and then press the Enter button.
If you using old version.

-> When inputting digital data after inputting analog data, repeat steps 2 to 5.
4-15
4. Troubleshooting
 Inputting the MCU Data

1) Check the following options.
- Manufacture : MSTAR
- Device Type :TSUMxx
- Communication Por t: DSUB15(Analog)
- External Memory : PMC25LV010
2) Click the LoadFile button, select an MCU code file, and then click the Open [O] button.
4-16
4. Troubleshooting
3) Click the Auto Program button.

4) When programming and verification are complete, hard power the monitor off and then on again.
4-17
4. Troubleshooting
 Inputting the Code (HDCP)
1. Run the service.exe file.
2. Click the HDCP button.
4-18
4. Troubleshooting
3. Click the HDCP Write button and select MStar_HDCPKEY.
4. Inputting the HDCP key is completed.
4-19
4. Troubleshooting
Memo
4-20

5-1. LS23EFHKFV/EN Exploded View (P2370)
M0013
STD
M0027
M0014
T0010
T0275
M0215
M0215
T0003
5-1
5-1-1. LS23EFHKFV/EN Parts List (P2370)
Location No. Code No. Description & Specification Q’ty SA/SNA Remark
M0215 BN07-00711A LCD-PANEL;LTM230HT02 1 S.A
M0215 BN44-00286B INVERTER;Ecofit23”w,INV23N02A,60khz,12V, 1 S.A
T0010 BN61-05083A HOLDER-SUB PCB;LS23EF,HIPS,BK23 1 S.N.A
T0275 BN63-05769A SHIELD-MAIN;ECOFIT 22”,SPTE,T0.3 1 S.N.A
M0014 BN94-02609B ASSY PCB MAIN-STZ,W/W;LS23EFH* 1 S.A
T0003 BN96-09624A ASSY COVER P-FRONT;ECOFIT 23,PMMA, PMMA+ 1 S.A
M0013 BN96-09625A ASSY COVER P-REAR;ECOFIT 23,PMMA+ABS,HB, 1 S.A
STD BN96-09628B ASSY STAND P-BODY;ECOFIT,PC 1 S.N.A
M0027 BN96-09629A ASSY STAND P-BASE;ECOFIT,ABS HB,BK23(H/G 1 S.A
5-2
5-2. LS23EFHKFV/EN Parts List (P2370)

Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE)
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
P2370,WBJ1/S23H0-LEF,23,LCD-
LS23EFHKFV/EN
MO,NETHERLAN
0.1 M0001 BN90-02018A ASSY COVER FRONT;LS23EF,ECOFIT 1 S.N.A

ASSY COVER P-FRONT;ECOFIT 23,PMMA,
..2 T0003 BN96-09624A 1 S.A
PMMA+
...3 CCM1 BN63-02183D COVER-SHEET;Rhcm,PE Vinyl,T0.05,680mm,20 0.5 S.N.A
COVER-FRONT;ECOFIT 23”,PMMA,
...3 M0112 BN63-05423A 1 S.N.A
PMMA+ABS,TO
...3 6003-000282 SCREW-TAPTYPE;BH,+,-,B,M3,L8,ZPC(BLK),SW 1 S.N.A
...3 T0212 BN61-05458A BRACKET-PANEL;ECOFIT 23”,SECC,T1.0 1 S.N.A
...3 M0140 BN63-01474G FELT-STAND;ECOFIT23”(P2370),T0.35,20,127 1 S.N.A
...3 M0020 BN96-10522B ASSY BOARD P;Ecofit,Function Assy,With H 1 S.N.A
LEAD CONNECTOR;ECOFIT,UL1571#30,5P,10
....4 M2893 BN39-01164A 1 S.A
0mm
....4 M0020 BN96-10522A ASSY BOARD P;Ecofit,Function Assy,Withou 1 S.N.A
.....5 BN94-02622R ASSY PCB MISC-ECOFIT,F/PCB,BN9;ECOFIT 1 S.N.A
KNOB-CONTROL MIRROR;ECOFIT
......6 BN64-01023A 1 S.N.A
23”,ABS,HB,WH
......6 BN64-01024A INLAY-PLATE;P2370,ECOFIT 23”,PET SHEET,T 1 S.N.A
TAPE-FUNCTION TAPE;DOUBLE FACE
......6 TOP BN74-00025A 1 S.N.A
TAPE,Poly
......6 BOTTOM BN74-00026A 1 S.N.A
TAPE,Poly
......6 T0174 BN97-03017N ASSY SMD;ECOFIT,F/PCB-SMD 1 S.N.A
.......7 L0405 0601-002331 LED;SMD,(SIDE VIEW ),WHT,2.04mm 1 S.A
IC-SENSOR;MCS-5000,UQFN,24P,4x4mm,PLA
.......7 U1 1209-001809 1 S.A
STI
.......7 R1 2007-000082 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 1 S.N.A
.......7 C1 2203-006618 C-CER,CHIP;2200nF,+80-20%,16V,Y5V,TP,160 1 S.N.A
HEADER-BOARD TO
.......7 CN330 3711-005743 1 S.N.A
CABLE;BOX,5P,1R,1.25mm,A
.......7 PCB BN41-01189A PCB-FUNCTION;Ecofit Function PCB,FR-4,2, 1 S.N.A
0.1 M0002 BN90-02019A ASSY COVER REAR;LS23EF,ECOFIT 1 S.N.A

ASSY COVER P-REAR;ECOFIT
..2 M0013 BN96-09625A 1 S.A
23,PMMA+ABS,HB,
SCREW-TAPTYPE;FH,+,B,M3,L8,ZPC(BLK),SW
...3 6003-001001 1 S.N.A
RC
...3 CIS4 BN61-05084A HOLDER-STAND;ECOFIT 23”,ACETAL,WHITE 1 S.N.A
COVER-REAR;P2370, ECOFIT
...3 M0006 BN63-05424A 1 S.N.A
23”,PMMA+ABS,HB
...3 BN63-05434A SHIELD-LAMP;ECOFIT 23”,SPTE,T0.3 1 S.N.A
5-3
COVER-STAND;P2370, ECOFIT
...3 M0111 BN63-05442A 1 S.N.A
23”,PMMA+ABS,H
...3 M0131 BN63-02966A GASKET;GASKET EMI,Polyurethane Sponge+Po 1 S.N.A
SCREW-TAPTYPE;FH,+,B,M4,L10,ZPC(WHT),S
...3 6003-001239 2 S.N.A
WR
...3 T0060 BN61-05090A SPRING ETC;ECOFIT 23”,SK5,T0.5 1 S.N.A
...3 BN61-05091A SPRING ETC-STAND;ECOFIT 23”,SUS304,T0.3 1 S.N.A
...3 T0069 AA63-60122K SPACER-FELT;SPD-42P3S,FELT,L60,D20,T0.35 2 S.N.A
0.1 M0017 BN91-03323T ASSY CHASSIS-STZ,W/W;LS23EFH* 1 S.N.A

..2 M0215 BN44-00286B INVERTER;Ecofit23”w,INV23N02A,60khz,12V, 1 S.A
..2 T0010 BN61-05083A HOLDER-SUB PCB;LS23EF,HIPS,BK23 1 S.N.A
..2 M0014 BN94-02609B ASSY PCB MAIN-STZ,W/W;LS23EFH* 1 S.A
...3 T0245 0202-001608 SOLDER-WIRE FLUX;LFC7-107,D0.8,99.3Sn/0. 0.003 S.N.A
CONNECTOR-DVI;24P+5C,3R,FEMALE,STRAI
...3 CN102 3701-001225 1 S.A
GHT,
...3 CN700 3722-001849 JACK-DC POWER;3P,7.1MM,SNPB,BLK 1 S.A
ASSY HDCP;BN46-00018A,BR20/21BS_
...3 HDCP BN97-00707A 1 S.N.A
CS,MSTAR
KEY CODE-CERTIFICATE;(HDCP
....4 BN46-00018A 1 S.N.A
KEY)PPM42M5S,
...3 T0174 BN97-03017C ASSY SMD;LS23EFHKFV/ZC 1 S.N.A
DIODE-SWITCHING;MMBD4148SE,100V,200m
....4 D100 0401-001056 1 S.A
A,SO
....4 D101 0401-001056 1 S.A
A,SO
....4 D102 0401-001056 1 S.A
A,SO
....4 D103 0401-001056 1 S.A
A,SO
....4 D104 0401-001056 1 S.A
A,SO
....4 D105 0401-001056 1 S.A
A,SO
....4 D106 0401-001056 1 S.A
A,SO
....4 D107 0401-001056 1 S.A
A,SO
....4 D108 0401-001056 1 S.A
A,SO
....4 D109 0401-001056 1 S.A
A,SO
....4 D110 0401-001056 1 S.A
A,SO
....4 D600 0402-001614 DIODE-RECTIFIER;S1G,400V,1A,DO-214AC,TP 1 S.A
....4 ZD102 0403-001411 DIODE-ZENER;5.49-5.73V,200mW,SOD-323,TP 1 S.N.A
DIODE-SCHOTTKY;SSC54,20V,5000mA,DO-
....4 D0254 0404-001307 1 S.A
214AB
5-4
....4 ZD103 0406-001061 DIODE-TVS;MMQA5V6T3,5.32/5.6/5.88V,24W,S 1 S.A

TR-SMALL SIGNAL;KTC3875S-
....4 Q201 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q203 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q204 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q601 0501-000445 1 S.A
Y,NPN,150mW,SOT
TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-
....4 Q101 0501-002080 1 S.A
59
....4 Q102 0501-002080 1 S.A
59
....4 Q202 0501-002080 1 S.A
59
....4 Q205 0501-002080 1 S.A
59
....4 Q207 0501-002080 1 S.A
59
....4 Q409 0505-001165 FET-SILICON;SI3443BDV,P,-20V,+-4.4A,65mo 1 S.A
....4 Q409 0505-001170 FET-SILICON;SI9933ADY-T1,P,-20V,3.4A,0.0 1 S.A
....4 IC112 1103-000129 IC-EEPROM;24C02,2Kbit,256x8,SOP,8P,5x4mm 1 S.A
....4 IC112 1103-001410 IC-EEPROM;S-24CS08AFJ-TB-1GE,8Kbit,1Kx8, 1 S.A
....4 IC604 1202-000104 IC-VOLTAGE COMP.;393,SOP,8P,150MIL,DUAL, 1 S.A
....4 T0170 1203-003059 IC-SWITCH VOL. REG.;MP1583,SOIC,8P,4.9x3 1 S.A
....4 T0087 1203-003695 IC-POSI.FIXED REG.;NCP1117ST33T3G,SOT-22 1 S.A
....4 T0087 1203-003696 IC-POSI.FIXED REG.;NCP1117DT18T5G,DPAK,3 1 S.A
IC-LCD CONTROLLER;SE859MRH-
....4 IC109 1205-003664 1 S.A
LH,PQFP,128P,
....4 R603 2007-000052 R-CHIP;10Kohm,1%,1/10W,TP,1608 1 S.N.A
....4 R123 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 S.N.A
....4 R111 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R113 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R114 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R117 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R118 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
5-5
....4 R120 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A

....4 R126 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R130 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R132 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R216 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R230 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R255 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R261 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R263 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R281 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R282 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R283 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R110 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 1 S.A
....4 R207 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 1 S.A
....4 R125 2007-000124 R-CHIP;2.2Kohm,5%,1/10W,TP,1608 1 S.N.A
5-6

....4 R232 2007-000309 R-CHIP;10ohm,5%,1/10W,TP,1608 1 S.A
....4 R273 2007-000309 R-CHIP;10ohm,5%,1/10W,TP,1608 1 S.A
....4 R121 2007-001044 R-CHIP;56ohm,5%,1/10W,TP,1608 1 S.A
....4 R122 2007-001044 R-CHIP;56ohm,5%,1/10W,TP,1608 1 S.A
....4 C215 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 1 S.N.A
....4 C216 2203-000236 C-CER,CHIP;0.1nF,5%,50V,C0G,1608 1 S.N.A
....4 C109 2203-000257 C-CER,CHIP;10nF,10%,50V,X7R,TP,1608 1 S.A
....4 C106 2203-000888 C-CER,CHIP;4.7nF,10%,50V,X7R,TP,1608 1 S.A
....4 C219 2203-000975 C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,- 1 S.N.A
....4 C100 2203-005005 C-CER,CHIP;100nF,10%,16V,X7R,1608 1 S.A
5-7

....4 C214 2402-001079 C-AL,SMD;100uF,20%,35V,WT,TP,10.3x10.3x1 1 S.A
....4 C602 2402-001128 C-AL,SMD;100μF,20%,16V,-,TP,6.3X5.7mm 1 S.A
....4 T0052 2703-002801 INDUCTOR-SMD;3.9uH,20%,7070 1 S.A
CRYSTAL-SMD;14.31818MHz,30ppm,28-
....4 X202 2801-003667 1 S.A
AAN,16p
HEADER-BOARD TO
....4 CN330 3711-005471 1 S.N.A
CABLE;BOX,12P,1R,1.25mm,
HEADER-BOARD TO
....4 CN330 3711-005743 1 S.N.A
5-8
....4 T0010 BN27-00009A COIL CHOKE;SMD 12x12x6,EOS,33uH,15%,0.12 1 S.A

....4 T0077 BN41-01155A PCB MAIN;Ecofit Project,CEM-3,2,MP 1.0,1 1 S.N.A
MAIN_
....4 BN97-02994K ASSY MICOM-STZ,W/W;LS23EFHKFV/* 1 S.N.A
MICOM
IC-FLASH MEMORY;MX25L1005,1Mbit,1Mx1,S
.....5 IC115 1107-001614 1 S.N.A
OP
DIODE-ZENER;BZX84C6V2,5.8-
....4 ZD108 0403-001180 1 S.A
6.6V,350mW,SOT
....4 T0568 3301-001407 BEAD-SMD;30ohm,1608,300mA,TP,,,0.4ohm 1 S.N.A
SOLDER-CREAM;LST309-M,D20~45um,96.5Sn/
....4 SUB05 0202-001477 0.733 S.N.A
3A
HEADER-BOARD TO
....4 CN330 3711-006222 1 S.A
CABLE;BOX,30P,1R,1mm,SMD
....4 C210 2203-000292 C-CER,CHIP;0.01nF,5%,50V,C0G,1608 1 S.A
....4 C244 2203-006141 C-CER,CHIP;1000nF,10%,16V,X5R,1608 1 S.N.A
...3 T0275 BN63-05769A SHIELD-MAIN;ECOFIT 22”,SPTE,T0.3 1 S.N.A
..2 M2893 BN39-00419C 1 S.A
0mm
LEAD CONNECTOR;ECOFIT,UL20276#30,30P,
..2 M2893 BN39-01188A 1 S.A
200
..2 T0073 AA63-00822A GASKET-EMI;71TSVK-15-5-15-13,Conductive 3 S.N.A
..2 M0131 AA63-00975A GASKET;CT40CS,Conductive Fabric,7mm,7mm, 1 S.N.A
..2 M0131 BN63-05878A GASKET;Ecofit,Polyurethane+Cu+Ni+Hotmelt 2 S.N.A
0.1 M0106 BN91-03324E ASSY LCD-STZ;LS23EFHKFV/ZC 1 S.N.A

..2 M0215 BN07-00711A LCD-PANEL;LTM230HT02 1 S.A
0.1 M0112 BN91-03700A ASSY SHIELD;LS23EF,ECOFIT 1 S.N.A

..2 CIS1 BN74-00021A TAPE-FILAMENT;Filament tape,clear,#8915, 0.06 S.N.A
0.1 M0019 BN92-03547X ASSY LABEL;LS22EFHKFV/ZC 1 S.N.A
0.1 BN92-04218Z ASSY P/MATERIAL-W/W;LS23EFHKFV/ZC 1 S.N.A

..2 T0376 6902-000061 BAG AIR;LDPE,T0.2,W500,L1000,TRP,370.000 0.006 S.N.A
..2 T0003 6902-000604 BAG WRAPPING;LDPE,T0.02,W500,L10000,TRP, 1.05 S.N.A
..2 M0081 6902-000609 BAG ROLL;LDPE,T0.05,W2400,L1000,TRP,30.0 0.017 S.N.A
..2 T0524 6902-000996 BAG PE;HDPE/NITRON,T0.015/T0.5,W800,L600 1 S.N.A
0.1 M0045 BN92-04233Y ASSY ACCESSORY;LS22EFHKFV/CI 1 S.N.A

CBF-POWER CORD;DT,EU,FP3/YES,IEC320
..2 T0268 3903-000042 1 S.A
C13/
ADAPTOR;SAD03612A-UV,ADAPTOR,90 ~
..2 M0158 BN44-00139A 1 S.A
264Vac
...3 BN81-02978A A/S-THREAD LOCKER;762,760G,0201-003005 0.08 S.N.A
5-9
A/S-ADHESIVE SEALANT;TSE3854-
...3 BN81-02979A 0.007 S.N.A
DW,SILICONE
...3 BN81-02983A A/S-SILICON GREESE;YG-6111,0206-000001 0.05 S.N.A
...3 D103 BN81-02988A A/S-DIODE-SWG;0401-000002 1 S.N.A
...3 D1 BN81-02989A A/S-DIODE-BRIDGE;0402-000003 1 S.N.A
...3 ZD201 BN81-02990A A/S-DIODE-ZENER;0403-000003 1 S.N.A
...3 D202 BN81-02991A A/S-DIODE-SCH;0404-000005 1 S.N.A
...3 D102 BN81-02992A A/S-DIODE-UF;0409-000007 1 S.N.A
...3 Q102 BN81-02993A A/S-TR-PNP;0502-000001 1 S.N.A
...3 Q201 BN81-02993A A/S-TR-PNP;0502-000001 1 S.N.A
...3 Q202 BN81-02994A A/S-TR-NPN;0502-000002 1 S.N.A
...3 Q101 BN81-02995A A/S-FET-N MOS;0505-000006 1 S.N.A
...3 PC201 BN81-02996A A/S-PHOTO-COUPLER;0604-000001 1 S.N.A
...3 IC101 BN81-02997A A/S-IC-PWM CONTROLLER;0904-000001 1 S.N.A
...3 IC201 BN81-02998A A/S-IC-SHUNT REGULATOR;1203-000003 1 S.N.A
...3 TH1 BN81-02999A A/S-THERMISTOR-NTC;1404-000003 1 S.N.A
...3 TH101 BN81-03001A A/S-THERMISTOR-CHIP;1404-000005 1 S.N.A
...3 R109 BN81-03002A A/S-RESISTOR-CARBON;2001-000007 1 S.N.A
...3 R106 BN81-03004A A/S-RESISTOR-MOR;2001-100005 1 S.N.A
...3 R114 BN81-03007A A/S-RES-CHIP;2007-300003 1 S.N.A
...3 J101 BN81-03019A A/S-RES-CHIP;2007-500001 1 S.N.A
...3 C5 BN81-03024A A/S-CAP-C DS;2201-000003 1 S.N.A
...3 C104 BN81-03026A A/S-CAP-C MLCC;2203-000001 1 S.N.A
5-10

...3 C2 BN81-03032A A/S-CAP-FILM;2305-000012 1 S.N.A
...3 C101 BN81-03034A A/S-CAP-E AL;2401-000005 1 S.N.A
...3 T101 BN81-03037A A/S-TRANS-SWG;2602-000013 1 S.N.A
...3 LF1 BN81-03038A A/S-LINE-FILTER;2902-000002 1 S.N.A
...3 L102 BN81-03039A A/S-FERRITE-BEAD FILTER;3301-002073 1 S.N.A
...3 L101 BN81-03041A A/S-FERRITE-BEAD CORE;3301-002075 1 S.N.A
...3 F1 BN81-03042A A/S-FUSE;3601-000005 1 S.N.A
...3 BN81-03043A A/S-SCREW-M;6001-000004 2 S.N.A
...3 BN81-03044A A/S-NUT-HEXAGON;6021-000001 2 S.N.A
...3 D202 BN81-03045A A/S-HEAT SINK;6203-000008 1 S.N.A
...3 Q101 BN81-03046A A/S-HEAT SINK;6203-000014 1 S.N.A
...3 BN81-03047A A/S-EYELET;6402-000001 4 S.N.A
...3 BN81-03048A A/S-EYELET;6402-000002 4 S.N.A
...3 BN81-03054A A/S-VINYL SACK;MA69-00325F 1 S.N.A
...3 BN81-03055A A/S-LABEL-HIPOT;MB68-00001A 1 S.N.A
...3 BN81-03056A A/S-LABEL-CODE;MB68-00002A 1 S.N.A
...3 BN81-03057A A/S-LABEL;MB68-00038A 1 S.N.A
...3 BN81-03058A A/S-CASE-TOP;MB72-00003A 1 S.N.A
...3 BN81-03059A A/S-CASE-BOTTOM;MB72-00003B 1 S.N.A
...3 BN81-03060A A/S-CHOKE COIL ASSY;MB75-00007A 1 S.N.A
...3 BN81-03061A A/S-IN-LET;MB75-30002A 1 S.N.A
...3 BN81-03062A A/S-INSULATION-SHEET;MB75-40001A 1 S.N.A
...3 BN81-03063A A/S-INSULATOR-RING;MB75-40012A 1 S.N.A
...3 BN81-03064A A/S-PCB-MAIN;MB81-10014A 1 S.N.A
...3 BN81-03065A A/S-DC CABLE;MB84-20001A 1 S.N.A
..2 M0045 BN96-09373V ASSY ACCESSORY;LS22EFHKFV/CI 1 S.A
...3 T0524 6902-000110 BAG PE;LDPE,T0.05,W250,L400,TRP,28,2,-,9 1 S.N.A
MANUAL FLYER-03,WARRANTY
...3 BH68-00633B 1 S.N.A
CARD;comm,Samsu
...3 BH68-70448A CARD-01;TFT LCD,SRC,RUSSIA,S/W,120,W210* 1 S.N.A
...3 M0125 BN39-00246L CBF SIGNAL-DVI(D);DVI-Cable,24P/24P,2027 1 S.A
ASSY MANUAL P-IB+QSG;P2070,P2270,P237
...3 M0215 BN96-09890B 1 S.N.A
0,P
....4 CCM1 BN59-00841B S/W DRIVER-02,IB;P2*70(G),WW,SyncMaster 1 S.N.A
....4 BN68-01905B MANUAL FLYER-QSG;P2*70(G),W/W,Mojo 80g,1 1 S.N.A
...3 M9889 BN63-02368B CLOTH-CLEAN;cloth,120,160,sea blue,ToC 1 S.N.A
MANUAL FLYER-00,WEE;comm,Samsung,23La
...3 BN68-00907F 1 S.N.A
ng,
5-11
MANUAL FLYER-WARRANTY
...3 T0238 BN68-01925B 1 S.N.A
CARD;comm,Samsung,
ASSY STAND P-BASE;ECOFIT,ABS HB,BK23(H/
..2 M0027 BN96-09629A 1 S.A
G
...3 CIS4 BN61-01717A HOLDER-STAND;BIZET,NI PLT,CH,+,M4,L11(5) 1 S.N.A
BRACKET-STAND BOTTOM;ECOFIT 23”,SECC
...3 BN61-05087A 1 S.N.A
T0.
...3 CCM1 BN63-02183K COVER-SHEET;Rhcm,PE Vinyl,T 0.05,250MM,2 0.3 S.N.A
COVER-STAND BASE;ECOFIT
...3 T0004 BN63-05425A 1 S.N.A
23”,ABS,HB,BK23,
...3 T0132 BN73-00077A RUBBER FOOT;MATISSE,BUMPON,Ф13.5,T2.0,6 4 S.N.A
...3 6003-001001 4 S.N.A
RC
...3 T0524 6902-000109 BAG PE;HDPE,T0.015,W350,L430,TRP,28,2,4. 1 S.N.A
...3 BN68-02009B MANUAL FLYER-STAND;Ecofit,Lavender,Mojo 1 S.N.A
..2 BN39-00310D CBF SIGNAL-DVI(A);DVI(A) cable,15P/10P,U 1 S.A
..2 STD BN96-09628B ASSY STAND P-BODY;ECOFIT,PC 1 S.N.A
...3 T0524 6902-000023 BAG PE;LDPE,T0.08,W150,L120,TRP,1.650g 1 S.N.A
...3 T0069 BN60-00119B SPACER-FELT;ECOFIT 23”(P2370),FELT,L145, 1 S.N.A
...3 BN61-05095A STAND-BAR;P2370, ECOFIT 23”,PC CLEAR,TP3 1 S.N.A
....4 BN61-05094A STAND-BAR IN;P2370, ECOFIT 23”,PC CLEAR, 1 S.N.A
....4 BN61-05410A STAND-BAR A;ECOFIT, LB650 19”,22”,PC BLU 1 S.N.A
BRACKET-STOPPER NUT;ECOFIT
.....5 BN61-02932E 1 S.N.A
20,M4,D8,L12,
0.1 M0003 BN92-04332G ASSY BOX;LS23EFHKFV/CH 1 S.N.A

ASSY MISC P-01,HANDLE PACKING;ALL
..2 BN96-02895A 1 S.N.A
MODEL,
...3 M0103 BN66-00007A LEVER-TOP;ALL MODEL,LDPE,WHITE,5.8g 1 S.N.A
LEVER-BOTTOM;ALL
...3 M0102 BN66-00008A 1 S.N.A
MODEL,LDPE,WHITE,4.01g
..2 BN69-03563C BOX-SET;P230S,CB,A-01,SW2, ECT40,YEL,W68 1.01 S.N.A
5-12

5-1. LS23EFHKFV/EN Exploded View (P2370)
M0013
STD
M0027
M0014
T0010
T0275
M0215
M0215
T0003
5-1
5-1-1. LS23EFHKFV/EN Parts List (P2370)
Location No. Code No. Description & Specification Q’ty SA/SNA Remark
M0215 BN07-00711A LCD-PANEL;LTM230HT02 1 S.A
M0215 BN44-00286B INVERTER;Ecofit23”w,INV23N02A,60khz,12V, 1 S.A
T0010 BN61-05083A HOLDER-SUB PCB;LS23EF,HIPS,BK23 1 S.N.A
T0275 BN63-05769A SHIELD-MAIN;ECOFIT 22”,SPTE,T0.3 1 S.N.A
M0014 BN94-02609B ASSY PCB MAIN-STZ,W/W;LS23EFH* 1 S.A
T0003 BN96-09624A ASSY COVER P-FRONT;ECOFIT 23,PMMA, PMMA+ 1 S.A
M0013 BN96-09625A ASSY COVER P-REAR;ECOFIT 23,PMMA+ABS,HB, 1 S.A
STD BN96-09628B ASSY STAND P-BODY;ECOFIT,PC 1 S.N.A
M0027 BN96-09629A ASSY STAND P-BASE;ECOFIT,ABS HB,BK23(H/G 1 S.A
5-2
5-2. LS23EFHKFV/EN Parts List (P2370)

Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE)
P2370,WBJ1/S23H0-LEF,23,LCD-
LS23EFHKFV/EN
MO,NETHERLAN
0.1 M0001 BN90-02018A ASSY COVER FRONT;LS23EF,ECOFIT 1 S.N.A

ASSY COVER P-FRONT;ECOFIT 23,PMMA,
..2 T0003 BN96-09624A 1 S.A
PMMA+
COVER-FRONT;ECOFIT 23”,PMMA,
...3 M0112 BN63-05423A 1 S.N.A
PMMA+ABS,TO
...3 6003-000282 SCREW-TAPTYPE;BH,+,-,B,M3,L8,ZPC(BLK),SW 1 S.N.A
...3 T0212 BN61-05458A BRACKET-PANEL;ECOFIT 23”,SECC,T1.0 1 S.N.A
...3 M0140 BN63-01474G FELT-STAND;ECOFIT23”(P2370),T0.35,20,127 1 S.N.A
...3 M0020 BN96-10522B ASSY BOARD P;Ecofit,Function Assy,With H 1 S.N.A
....4 M2893 BN39-01164A 1 S.A
0mm
....4 M0020 BN96-10522A ASSY BOARD P;Ecofit,Function Assy,Withou 1 S.N.A
.....5 BN94-02622R ASSY PCB MISC-ECOFIT,F/PCB,BN9;ECOFIT 1 S.N.A
KNOB-CONTROL MIRROR;ECOFIT
......6 BN64-01023A 1 S.N.A
23”,ABS,HB,WH
......6 BN64-01024A INLAY-PLATE;P2370,ECOFIT 23”,PET SHEET,T 1 S.N.A
......6 TOP BN74-00025A 1 S.N.A
TAPE,Poly
......6 BOTTOM BN74-00026A 1 S.N.A
TAPE,Poly
......6 T0174 BN97-03017N ASSY SMD;ECOFIT,F/PCB-SMD 1 S.N.A
IC-SENSOR;MCS-5000,UQFN,24P,4x4mm,PLA
.......7 U1 1209-001809 1 S.A
STI
.......7 R1 2007-000082 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 1 S.N.A
HEADER-BOARD TO
.......7 CN330 3711-005743 1 S.N.A
.......7 PCB BN41-01189A PCB-FUNCTION;Ecofit Function PCB,FR-4,2, 1 S.N.A
0.1 M0002 BN90-02019A ASSY COVER REAR;LS23EF,ECOFIT 1 S.N.A

ASSY COVER P-REAR;ECOFIT
..2 M0013 BN96-09625A 1 S.A
23,PMMA+ABS,HB,
...3 6003-001001 1 S.N.A
RC
...3 CIS4 BN61-05084A HOLDER-STAND;ECOFIT 23”,ACETAL,WHITE 1 S.N.A
COVER-REAR;P2370, ECOFIT
...3 M0006 BN63-05424A 1 S.N.A
23”,PMMA+ABS,HB
...3 BN63-05434A SHIELD-LAMP;ECOFIT 23”,SPTE,T0.3 1 S.N.A
5-3
COVER-STAND;P2370, ECOFIT
...3 M0111 BN63-05442A 1 S.N.A
23”,PMMA+ABS,H
...3 M0131 BN63-02966A GASKET;GASKET EMI,Polyurethane Sponge+Po 1 S.N.A
SCREW-TAPTYPE;FH,+,B,M4,L10,ZPC(WHT),S
...3 6003-001239 2 S.N.A
WR
...3 T0060 BN61-05090A SPRING ETC;ECOFIT 23”,SK5,T0.5 1 S.N.A
...3 BN61-05091A SPRING ETC-STAND;ECOFIT 23”,SUS304,T0.3 1 S.N.A
...3 T0069 AA63-60122K SPACER-FELT;SPD-42P3S,FELT,L60,D20,T0.35 2 S.N.A
0.1 M0017 BN91-03323T ASSY CHASSIS-STZ,W/W;LS23EFH* 1 S.N.A

..2 M0215 BN44-00286B INVERTER;Ecofit23”w,INV23N02A,60khz,12V, 1 S.A
..2 T0010 BN61-05083A HOLDER-SUB PCB;LS23EF,HIPS,BK23 1 S.N.A
..2 M0014 BN94-02609B ASSY PCB MAIN-STZ,W/W;LS23EFH* 1 S.A
...3 T0245 0202-001608 SOLDER-WIRE FLUX;LFC7-107,D0.8,99.3Sn/0. 0.003 S.N.A
CONNECTOR-DVI;24P+5C,3R,FEMALE,STRAI
...3 CN102 3701-001225 1 S.A
GHT,
...3 CN700 3722-001849 JACK-DC POWER;3P,7.1MM,SNPB,BLK 1 S.A
ASSY HDCP;BN46-00018A,BR20/21BS_
...3 HDCP BN97-00707A 1 S.N.A
CS,MSTAR
KEY CODE-CERTIFICATE;(HDCP
....4 BN46-00018A 1 S.N.A
KEY)PPM42M5S,
...3 T0174 BN97-03017C ASSY SMD;LS23EFHKFV/ZC 1 S.N.A
....4 D100 0401-001056 1 S.A
A,SO
....4 D101 0401-001056 1 S.A
A,SO
....4 D102 0401-001056 1 S.A
A,SO
....4 D103 0401-001056 1 S.A
A,SO
....4 D104 0401-001056 1 S.A
A,SO
....4 D105 0401-001056 1 S.A
A,SO
....4 D106 0401-001056 1 S.A
A,SO
....4 D107 0401-001056 1 S.A
A,SO
....4 D108 0401-001056 1 S.A
A,SO
....4 D109 0401-001056 1 S.A
A,SO
....4 D110 0401-001056 1 S.A
A,SO
DIODE-SCHOTTKY;SSC54,20V,5000mA,DO-
....4 D0254 0404-001307 1 S.A
214AB
5-4
....4 ZD103 0406-001061 DIODE-TVS;MMQA5V6T3,5.32/5.6/5.88V,24W,S 1 S.A

....4 Q201 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q203 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q204 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q601 0501-000445 1 S.A
Y,NPN,150mW,SOT
....4 Q101 0501-002080 1 S.A
59
....4 Q102 0501-002080 1 S.A
59
....4 Q202 0501-002080 1 S.A
59
....4 Q205 0501-002080 1 S.A
59
....4 Q207 0501-002080 1 S.A
59
....4 Q409 0505-001170 FET-SILICON;SI9933ADY-T1,P,-20V,3.4A,0.0 1 S.A
....4 IC112 1103-001410 IC-EEPROM;S-24CS08AFJ-TB-1GE,8Kbit,1Kx8, 1 S.A
....4 IC604 1202-000104 IC-VOLTAGE COMP.;393,SOP,8P,150MIL,DUAL, 1 S.A
....4 T0170 1203-003059 IC-SWITCH VOL. REG.;MP1583,SOIC,8P,4.9x3 1 S.A
....4 T0087 1203-003696 IC-POSI.FIXED REG.;NCP1117DT18T5G,DPAK,3 1 S.A
IC-LCD CONTROLLER;SE859MRH-
....4 IC109 1205-003664 1 S.A
LH,PQFP,128P,
....4 R111 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R113 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R114 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R117 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R118 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
5-5
....4 R120 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A

....4 R126 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R130 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R132 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R216 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R230 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R255 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R261 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R263 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R281 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R282 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
....4 R283 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 S.A
5-6

....4 R232 2007-000309 R-CHIP;10ohm,5%,1/10W,TP,1608 1 S.A
....4 R273 2007-000309 R-CHIP;10ohm,5%,1/10W,TP,1608 1 S.A
....4 R121 2007-001044 R-CHIP;56ohm,5%,1/10W,TP,1608 1 S.A
....4 R122 2007-001044 R-CHIP;56ohm,5%,1/10W,TP,1608 1 S.A
....4 C219 2203-000975 C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,- 1 S.N.A
5-7

....4 T0052 2703-002801 INDUCTOR-SMD;3.9uH,20%,7070 1 S.A
CRYSTAL-SMD;14.31818MHz,30ppm,28-
....4 X202 2801-003667 1 S.A
AAN,16p
HEADER-BOARD TO
....4 CN330 3711-005471 1 S.N.A
CABLE;BOX,12P,1R,1.25mm,
HEADER-BOARD TO
....4 CN330 3711-005743 1 S.N.A
5-8
....4 T0010 BN27-00009A COIL CHOKE;SMD 12x12x6,EOS,33uH,15%,0.12 1 S.A

....4 T0077 BN41-01155A PCB MAIN;Ecofit Project,CEM-3,2,MP 1.0,1 1 S.N.A
MAIN_
....4 BN97-02994K ASSY MICOM-STZ,W/W;LS23EFHKFV/* 1 S.N.A
MICOM
IC-FLASH MEMORY;MX25L1005,1Mbit,1Mx1,S
.....5 IC115 1107-001614 1 S.N.A
OP
DIODE-ZENER;BZX84C6V2,5.8-
....4 ZD108 0403-001180 1 S.A
6.6V,350mW,SOT
SOLDER-CREAM;LST309-M,D20~45um,96.5Sn/
....4 SUB05 0202-001477 0.733 S.N.A
3A
HEADER-BOARD TO
....4 CN330 3711-006222 1 S.A
CABLE;BOX,30P,1R,1mm,SMD
....4 C244 2203-006141 C-CER,CHIP;1000nF,10%,16V,X5R,1608 1 S.N.A
...3 T0275 BN63-05769A SHIELD-MAIN;ECOFIT 22”,SPTE,T0.3 1 S.N.A
..2 M2893 BN39-00419C 1 S.A
0mm
LEAD CONNECTOR;ECOFIT,UL20276#30,30P,
..2 M2893 BN39-01188A 1 S.A
200
..2 T0073 AA63-00822A GASKET-EMI;71TSVK-15-5-15-13,Conductive 3 S.N.A
..2 M0131 AA63-00975A GASKET;CT40CS,Conductive Fabric,7mm,7mm, 1 S.N.A
..2 M0131 BN63-05878A GASKET;Ecofit,Polyurethane+Cu+Ni+Hotmelt 2 S.N.A
0.1 M0106 BN91-03324E ASSY LCD-STZ;LS23EFHKFV/ZC 1 S.N.A

..2 M0215 BN07-00711A LCD-PANEL;LTM230HT02 1 S.A
0.1 M0112 BN91-03700A ASSY SHIELD;LS23EF,ECOFIT 1 S.N.A

..2 CIS1 BN74-00021A TAPE-FILAMENT;Filament tape,clear,#8915, 0.06 S.N.A
0.1 M0019 BN92-03547X ASSY LABEL;LS22EFHKFV/ZC 1 S.N.A
0.1 BN92-04218Z ASSY P/MATERIAL-W/W;LS23EFHKFV/ZC 1 S.N.A

..2 T0003 6902-000604 BAG WRAPPING;LDPE,T0.02,W500,L10000,TRP, 1.05 S.N.A
..2 M0081 6902-000609 BAG ROLL;LDPE,T0.05,W2400,L1000,TRP,30.0 0.017 S.N.A
..2 T0524 6902-000996 BAG PE;HDPE/NITRON,T0.015/T0.5,W800,L600 1 S.N.A
0.1 M0045 BN92-04233Y ASSY ACCESSORY;LS22EFHKFV/CI 1 S.N.A

CBF-POWER CORD;DT,EU,FP3/YES,IEC320
..2 T0268 3903-000042 1 S.A
C13/
ADAPTOR;SAD03612A-UV,ADAPTOR,90 ~
..2 M0158 BN44-00139A 1 S.A
264Vac
...3 BN81-02978A A/S-THREAD LOCKER;762,760G,0201-003005 0.08 S.N.A
5-9
A/S-ADHESIVE SEALANT;TSE3854-
...3 BN81-02979A 0.007 S.N.A
DW,SILICONE
...3 BN81-02983A A/S-SILICON GREESE;YG-6111,0206-000001 0.05 S.N.A
...3 D103 BN81-02988A A/S-DIODE-SWG;0401-000002 1 S.N.A
...3 D1 BN81-02989A A/S-DIODE-BRIDGE;0402-000003 1 S.N.A
...3 ZD201 BN81-02990A A/S-DIODE-ZENER;0403-000003 1 S.N.A
...3 D202 BN81-02991A A/S-DIODE-SCH;0404-000005 1 S.N.A
...3 Q102 BN81-02993A A/S-TR-PNP;0502-000001 1 S.N.A
...3 Q201 BN81-02993A A/S-TR-PNP;0502-000001 1 S.N.A
...3 Q202 BN81-02994A A/S-TR-NPN;0502-000002 1 S.N.A
...3 Q101 BN81-02995A A/S-FET-N MOS;0505-000006 1 S.N.A
...3 PC201 BN81-02996A A/S-PHOTO-COUPLER;0604-000001 1 S.N.A
...3 IC101 BN81-02997A A/S-IC-PWM CONTROLLER;0904-000001 1 S.N.A
...3 IC201 BN81-02998A A/S-IC-SHUNT REGULATOR;1203-000003 1 S.N.A
...3 TH1 BN81-02999A A/S-THERMISTOR-NTC;1404-000003 1 S.N.A
...3 TH101 BN81-03001A A/S-THERMISTOR-CHIP;1404-000005 1 S.N.A
5-10

...3 T101 BN81-03037A A/S-TRANS-SWG;2602-000013 1 S.N.A
...3 LF1 BN81-03038A A/S-LINE-FILTER;2902-000002 1 S.N.A
...3 L102 BN81-03039A A/S-FERRITE-BEAD FILTER;3301-002073 1 S.N.A
...3 F1 BN81-03042A A/S-FUSE;3601-000005 1 S.N.A
...3 BN81-03043A A/S-SCREW-M;6001-000004 2 S.N.A
...3 BN81-03044A A/S-NUT-HEXAGON;6021-000001 2 S.N.A
...3 D202 BN81-03045A A/S-HEAT SINK;6203-000008 1 S.N.A
...3 Q101 BN81-03046A A/S-HEAT SINK;6203-000014 1 S.N.A
...3 BN81-03047A A/S-EYELET;6402-000001 4 S.N.A
...3 BN81-03048A A/S-EYELET;6402-000002 4 S.N.A
...3 BN81-03054A A/S-VINYL SACK;MA69-00325F 1 S.N.A
...3 BN81-03055A A/S-LABEL-HIPOT;MB68-00001A 1 S.N.A
...3 BN81-03056A A/S-LABEL-CODE;MB68-00002A 1 S.N.A
...3 BN81-03057A A/S-LABEL;MB68-00038A 1 S.N.A
...3 BN81-03058A A/S-CASE-TOP;MB72-00003A 1 S.N.A
...3 BN81-03059A A/S-CASE-BOTTOM;MB72-00003B 1 S.N.A
...3 BN81-03060A A/S-CHOKE COIL ASSY;MB75-00007A 1 S.N.A
...3 BN81-03061A A/S-IN-LET;MB75-30002A 1 S.N.A
...3 BN81-03062A A/S-INSULATION-SHEET;MB75-40001A 1 S.N.A
...3 BN81-03063A A/S-INSULATOR-RING;MB75-40012A 1 S.N.A
...3 BN81-03064A A/S-PCB-MAIN;MB81-10014A 1 S.N.A
...3 BN81-03065A A/S-DC CABLE;MB84-20001A 1 S.N.A
..2 M0045 BN96-09373V ASSY ACCESSORY;LS22EFHKFV/CI 1 S.A
...3 T0524 6902-000110 BAG PE;LDPE,T0.05,W250,L400,TRP,28,2,-,9 1 S.N.A
MANUAL FLYER-03,WARRANTY
...3 BH68-00633B 1 S.N.A
CARD;comm,Samsu
...3 BH68-70448A CARD-01;TFT LCD,SRC,RUSSIA,S/W,120,W210* 1 S.N.A
...3 M0125 BN39-00246L CBF SIGNAL-DVI(D);DVI-Cable,24P/24P,2027 1 S.A
ASSY MANUAL P-IB+QSG;P2070,P2270,P237
...3 M0215 BN96-09890B 1 S.N.A
0,P
....4 CCM1 BN59-00841B S/W DRIVER-02,IB;P2*70(G),WW,SyncMaster 1 S.N.A
....4 BN68-01905B MANUAL FLYER-QSG;P2*70(G),W/W,Mojo 80g,1 1 S.N.A
...3 M9889 BN63-02368B CLOTH-CLEAN;cloth,120,160,sea blue,ToC 1 S.N.A
MANUAL FLYER-00,WEE;comm,Samsung,23La
...3 BN68-00907F 1 S.N.A
ng,
5-11
MANUAL FLYER-WARRANTY
...3 T0238 BN68-01925B 1 S.N.A
CARD;comm,Samsung,
ASSY STAND P-BASE;ECOFIT,ABS HB,BK23(H/
..2 M0027 BN96-09629A 1 S.A
G
...3 CIS4 BN61-01717A HOLDER-STAND;BIZET,NI PLT,CH,+,M4,L11(5) 1 S.N.A
BRACKET-STAND BOTTOM;ECOFIT 23”,SECC
...3 BN61-05087A 1 S.N.A
T0.
...3 CCM1 BN63-02183K COVER-SHEET;Rhcm,PE Vinyl,T 0.05,250MM,2 0.3 S.N.A
COVER-STAND BASE;ECOFIT
...3 T0004 BN63-05425A 1 S.N.A
23”,ABS,HB,BK23,
...3 T0132 BN73-00077A RUBBER FOOT;MATISSE,BUMPON,Ф13.5,T2.0,6 4 S.N.A
...3 6003-001001 4 S.N.A
RC
...3 T0524 6902-000109 BAG PE;HDPE,T0.015,W350,L430,TRP,28,2,4. 1 S.N.A
...3 BN68-02009B MANUAL FLYER-STAND;Ecofit,Lavender,Mojo 1 S.N.A
..2 BN39-00310D CBF SIGNAL-DVI(A);DVI(A) cable,15P/10P,U 1 S.A
..2 STD BN96-09628B ASSY STAND P-BODY;ECOFIT,PC 1 S.N.A
...3 T0524 6902-000023 BAG PE;LDPE,T0.08,W150,L120,TRP,1.650g 1 S.N.A
...3 T0069 BN60-00119B SPACER-FELT;ECOFIT 23”(P2370),FELT,L145, 1 S.N.A
...3 BN61-05095A STAND-BAR;P2370, ECOFIT 23”,PC CLEAR,TP3 1 S.N.A
....4 BN61-05094A STAND-BAR IN;P2370, ECOFIT 23”,PC CLEAR, 1 S.N.A
....4 BN61-05410A STAND-BAR A;ECOFIT, LB650 19”,22”,PC BLU 1 S.N.A
BRACKET-STOPPER NUT;ECOFIT
.....5 BN61-02932E 1 S.N.A
20,M4,D8,L12,
0.1 M0003 BN92-04332G ASSY BOX;LS23EFHKFV/CH 1 S.N.A

ASSY MISC P-01,HANDLE PACKING;ALL
..2 BN96-02895A 1 S.N.A
MODEL,
...3 M0103 BN66-00007A LEVER-TOP;ALL MODEL,LDPE,WHITE,5.8g 1 S.N.A
LEVER-BOTTOM;ALL
...3 M0102 BN66-00008A 1 S.N.A
MODEL,LDPE,WHITE,4.01g
..2 BN69-03563C BOX-SET;P230S,CB,A-01,SW2, ECT40,YEL,W68 1.01 S.N.A
5-12
6. Wiring Diagram
6. Wiring Diagram
6-1. Wiring Diagram - Main Board
6-1
6. Wiring Diagram
6-2. Wiring Diagram - IP Board
LVDS Connector
(Connect to Panel)
CN400
Flash
LVDS
memory
Inverter Connector
(Connect to
CN601
Inverter)
Inverter
IC200
Scaler EEPROM
CN200 X201
Function
Function Connector
(Connect to
Function)
CN700 CN102
Adapter DVI-I Input
DVI=I Connector
(Connect to PC)
6-2
6. Wiring Diagram
6-3. Connector Functions

Connector Functions
CN700 Supplies 12V From the Adaptor to the main board.

*When a problem occurs : The No Power and Blank screen errors may occur.
CN1 -CN601 Transmits the PWM output from the power board to the inverter.
* When a problem occurs : The blank screen errors may occur.
CN200 Connects the function board.

* When a problem occurs : The No LED screen and Function failure errors may occur.
CN102 DVI/VGA signal input terminal.

* When a problem occurs : The No RGB output error may occur.
CN400 Transmits the LVDS signals from the main board to the panel.
* When a problem occurs : The Blank screen and No POWER error may occur.
CN2, CN3 Transmits the lamp current(6mA ~ 7mA) generated in the inverter to the lamp of the panel.
* When a problem occurs : The Blank Screen error may occur.
6-4. Cables
Use LVDS 30p FFC cable
Code BN96-08740E
Photo
6-3
6. Wiring Diagram
Memo
6-4
7-1. Circuit Descriptions
7-1
Location Function Remark
Scaler Besides the ADC, LVDS and scaling part, an MCU is embedded
SE859MRH-LF
IC200 as well, All of them are integrated into one chip.
Flash
Stores the MCU program embedded in the scaler. It is of a flash
Memory MX25L1005MC
type and rewritable.
IC201
IC203 Stores the OSD and various timing values. 24C08
IC301 The memory to which DIGITAL DDC Data is input. 24C02
IC302 The memory to which ANALOG DDC Data is input. 24C02
DC-DC con. An IC that receives DC voltage inputs, It is used in circuits that
MP1583DN
IC202 stabilize the DC voltage.
NCP1117ST33T3G
An IC that receives DC voltage inputs. It is used in circuits that
Regulator NCP1117DT18T5G
stabilize the DC voltage.
AP1117-33VC-TRL
7-2. Schematic Diagrams (Power Flowchart)
7-2
7-3. Schematic Diagrams (Scaler Part)
7-3
7-4. Schematic Diagrams (IP Board)

 Inverter Part
7-4
Memo
7-5
7. Schematic Diagrams
7-5. Schematic Diagrams (Main PBA)

This Document can not be used without Samsungs authorization.
7-5
7. Schematic Diagrams
Memo
7-6

Samsung p2070 p2270 p2370 CH - Ls20efh Ls22efh Ls23efh LCD Monitor

Uploaded by

Copyright:

Available Formats

Samsung p2070 p2270 p2370 CH - Ls20efh Ls22efh Ls23efh LCD Monitor

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Samsung p2070 p2270 p2370 CH - Ls20efh Ls22efh Ls23efh LCD Monitor

Uploaded by

Copyright:

Available Formats

LCD-Monitor

TFT-LCD Monitor Contens

3. Disassembly and Reassemble

5. Exploded View & Part List

P2070 / P2270 / P2370

© 2009 Samsung Electronics Co.,Ltd.

1-1-2. Servicing the LCD Monitor

1-1-3. Fire and Shock Hazard

*ALSO TEST WITH

1-1-4. Product Safety Notices

1-2. Servicing Precautions

1-2-1 General Servicing Precautions

1-3. Static Electricity Precautions

1-4. Installation Precautions

� Panel Specification : 250cd/m2, 5ms(G to G 2ms), CR 1000:1(DCR 50000:1), 170/160

2-2. Spec Comparison to the Old Models

P2070 : 1600 x 900

Input DVI-I with HDCP Analog / DVI digital with HDCP

Response Time 5ms(G to G 2ms) 5ms(W to B)

Viewing Angle 170/160(CR>10) 170/160(CR>10)

Brightness 250 cd/m2 300 cd/m²

Contrast 50000:1(DCR) 20000:1(DCR)

MagicBright 7 step 7 step

Magic Color Magic Color

Quick Setup Guide BN68-01650A

Stand Body BN96-09628A

Stand Base BN96-09629A

Adator (12V/3V) BN44-00139A

3. Disassembly and Assembly

Description Photo Screws

2. Hold one edge of the FRONT-COVER and push

Description Photo Screws

4. Lift the REAR-COVER up to separate it.

5. Remove the LVDS(FFC Cable), LAMP wire,

6. Remove the LCD panel.

7. Remove the lead from the three (3) soldering

Caution: When assembling and disassembling

Description Photo Screws

9. Lift the shield upwards and remove it.

10. Separate the Inverter, Main PBA .

11. Pulling over the direction of arrow as shown in

Description Photo Screws

13. HOLDER SUB-PCB.

※The assembly is in the reverse order of disassembly.

4-2. When the power does Not Turn on

Yes Check the connection status for

Is DC12V measured at pins2 of the

Is DC5V measured at C222 when pin2 No Check the circuits related to

Is DC3.3V measured at pin3 of the No Check the circuits related to

Is DC3.3V measured at pin3 of the No Check the circuits related to

Is DC1.8V measured at pin1 of the No Check the circuits related to

Check and replace the Adaptor.

4-2-1. Circuit diagrams when the power does not turn on

4-3. When the screen is blank (Analog)

- Check the DVI-I to D-sub cable connections.

Yes Check the signal cables and

No Check and replace the circuits

Do the ③ Hsync and ④ Vsync No Check the circuits related to

Do output signals appear at pins 8 to 30 No Check the circuits related to

Caution: When assembling and disassembling