BERGERTHANE PU GLOSSY FINISH PART A

Safety Data Sheet

Section 1 - Chemical Product / Company Information
Product Name: BERGERTHANE PU GLOSSY Issued On: 31/10/2011
FINISH PART A Revision #: 00
SDS ref:MKT(P)325/43 M150800 - BLACK
Product use/class:
FOR INDUSTRIAL USE ONLY
Manufacturer: BERGER PAINTS INDIA LIMITED
Corporate Office Research & Development
BERGER HOUSE PROTECTON DEPARTMENT
129,Park Street 14 & 15 Swarnamoyee Road
Kolkata‐700017 Shibpur
Phone‐91‐33‐22299725 (5 lines) Howrah‐ 711 103
Fax‐91‐33‐2249729/90 Phone: 91‐33‐26684706 (4 lines)
E‐mail: [email protected] Fax: 91‐33‐26682956

Section 2 - Composition / Information On Ingredients

Name CAS No. Approx Wt %
XYLENE 1330-20-7 20-26

BUTYLACETATE 123-86-4 2-4

Section 3 - Hazards Identification

Emergency Overview: Use ventilation necessary to keep exposures below recommended exposure limits, if any.
Irritating to eyes, respiratory system and skin.
Effects Of Overexposure - Eye Contact: Can cause eye burns.
Effects Of Overexposure - Skin Contact: Direct skin contact may cause irritation
Effects Of Overexposure - Inhalation: Use in inadequately ventilated areas may result in irritation headache and
nausea. Harmful if inhaled and may cause delayed lung injury. May cause nose, throat and lung irritation.
Inhalation of vapors and/or aerosols in high concentration may cause irritation of the respiratory system.
Effects Of Overexposure - Ingestion: May be harmful if swallowed
Effects Of Overexposure - Chronic Hazards: There is no known health effects associated with chronic exposure to
this product. Under normal use conditions, this product is not expected to cause adverse health effects
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact
Medical Conditions Prone to Aggravation by Exposure: If sensitized to amines, epoxies, or other chemicals do not
use. See a physician if a medical condition exists.

Page 1 of 4
“All information, suggestions for use concerning this product as declared herein are offered in good faith and are believed to be
reliable. Berger Paints makes no warranty as to the accuracy of and/or sufficiency of information”.
 BERGERTHANE PU GLOSSY FINISH PART A

Section 4 - First Aid Measures

First Aid - Eye Contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician
First Aid - Skin Contact: In case of contact, immediately flush skin with plenty of water while removing
contaminated clothing and shoes. Launder clothing before reuse. If rash or irritation develops, consult a physician.
First Aid - Inhalation: If inhaled, remove to fresh air. Administer oxygen if necessary. Consult a physician if
symptoms persist or exposure was severe.
First Aid - Ingestion: If swallowed do not induce vomiting. Seek immediate medical attention.

Section 5 - Fire Fighting Measures

Flash Point, : Above 28ºc Lower Explosive Limit, %: N/A
Upper Explosive Limit, %: N/A
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog
Unusual Fire And Explosion Hazards: May generate ammonia gas. May generate toxic nitrogen oxide gases.
Incomplete combustion may form carbon monoxide. Downward personnel must be evacuated. Burning produces
obnoxious and toxic fumes.
Special Firefighting Procedures: Non-flammable. Cool fire-exposed containers using water spray. Wear self
contained breathing apparatus for firefighting if necessary.

Section 6 - Accidental Release Measures

Steps To Be Taken If Material Is Released Or Spilled: If a spill or leak occurs, contain the material. It can be
allowed to dry or cure and presents no health or fire hazard. The material can then be removed and disposed of as
non-hazardous waste. Before drying, the material can be washed or removed using soap and water. Soak up with
inert absorbent material and dispose of as hazardous waste. Evacuate personnel to safe areas. Use personal
protective equipment.

Section 7 - Handling And Storage

Handling: Do not get in eyes, on skin, or on clothing. Keep container tightly closed when not in use. Wear personal
protection equipment. Do not breathe vapors. Wash thoroughly after handling. Use only in accordance with Berger
application instructions, container label and Product Data Sheet.
Storage: Do not freeze. Keep containers tightly closed in a dry, cool and well-ventilated place.

Page 2 of 4
“All information, suggestions for use concerning this product as declared herein are offered in good faith and are believed to be
reliable. Berger Paints makes no warranty as to the accuracy of and/or sufficiency of information”.
 BERGERTHANE PU GLOSSY FINISH PART A

Section 8 - Exposure Controls / Personal Protection

Exposure Limits:
Name CAS No Permissible Exposure Limit
TLV-TWA(ACGIH) : 434 mgm/ M3
STEL(ACGIH) : 651 mgm/ M3
XYLENE 1330-20-7
LD 50 (ORAL-RAT) : 4300 mgm/Kg
LC 50 (IHL-RAT) : 5000 PPM/4 HRS
LD50: 10768 mg/kg : 17601 mg/kg. Acute
BUTYL ACETATE 123-86-4 toxicity of the vapor (LC50):
2000 4 hours
Engineering Controls: Where reasonably practicable this should be achieved by the use of local exhaust ventilation
and good general extraction.
Respiratory Protection: Use only with ventilation to keep levels below exposure guidelines reported in this
document. User should test and monitor exposure levels to ensure all personnel are below guidelines. If not sure,
or not able to monitor, use State or Nationally approved supplied air respirator. For silica containing coatings in a
liquid state, and/or if no exposures limits are established above, air supplied respirators are generally not required.
Skin Protection: Recommend impervious gloves and clothing to avoid skin contact. If material penetrates to skin,
change gloves and clothing. The use of protective creams may be beneficial to certain individuals. Protective
creams should be applied before exposure.
Eye Protection: Safety glasses with side-shields
Other protective equipment: Eye wash and safety showers should be readily available.
Hygienic Practices: Wash with soap and water before eating, drinking, smoking, applying cosmetics, or using toilet
facilities. Use of a hand cleaner is recommended. Launder contaminated clothing before reuse. Leather shoes can
absorb and allow hazardous materials to pass through. Check shoes carefully after soaking before reuse.

Section 9 - Physical And Chemical Properties

Physical State: Liquid Vapor Density: Heavier than Air
Odour: Smell of solvent Odor Threshold: N/D
Appearance: Smooth and uniform Evaporation Rate: N/D
Solubility in H2O: Insoluble Specific Gravity: 1.15+/- 0.03
Freeze Point: N/D PH: N/D
Vapor Pressure: N/D Solvent wt % : 34.00+/- 4.0
Boiling Range: 112°C-160°C Color: Signal Red

Page 3 of 4
“All information, suggestions for use concerning this product as declared herein are offered in good faith and are believed to be
reliable. Berger Paints makes no warranty as to the accuracy of and/or sufficiency of information”.
 BERGERTHANE PU GLOSSY FINISH PART A

Section 10 - Stability And Reactivity

Conditions To Avoid: Heat, flames and sparks.
Incompatibility: Keep away from strong oxidizing agents, heat and open flames.
Hazardous Decomposition Products: Nitric acid, Ammonia, Nitrogen Oxides, Carbon Monoxide, Carbon Dioxide,
Nitrosamine
Hazardous Polymerization: Will not occur under normal conditions.
Stability: Stable under normal conditions. This product is stable under normal storage conditions.

Section 11 - Toxicological Information

Name CAS No. Approx Wt % Risk Factors
Harmful in contact with skin,
XYLENE 1330-20-7 20-26 Harmful if swallowed,
Irritating to skin
Harmful in contact with skin,
BUTYL ACETATE 123-86-4 2-4 Harmful if swallowed,
Irritating to skin

Section 12 - Ecological Information

Ecological Information: No data

Section 13 - Disposal Information

Disposal Information: Dispose of in accordance with State, Local, and National Environmental regulations.
Responsibility for proper waste disposal is with the owner of the waste.

Section 14 - Transportation Information

DOT Proper Shipping Name: PAINT Packing Group III
DOT Technical Name: N/A Hazard Subclass: N/A
DOT Hazard Class: 3 Resp. Guide Page: None

DOT UN/NA Number: 1263

Section 15 - Regulatory Information

NEPA HEATH HAZARDS SIGNAL
HEALTH :1 FLAMMABILITY :3 REACTIVITY :0

Section 16 – Other Information

Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained herein is, to the best of our knowledge and belief accurate. However, since the
conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability
for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable
state, and local laws and regulations.

Page 4 of 4
“All information, suggestions for use concerning this product as declared herein are offered in good faith and are believed to be
reliable. Berger Paints makes no warranty as to the accuracy of and/or sufficiency of information”.