CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|CB10|PAB.

09:43:46
This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting receipt of this drawing does so on the express understanding and agreement that it will neither copy,
reproduce, disclose to third parties or use this document for any purpose other than those expressly agreed to by ANDRITZ AG or one of its affiliates. Approved For Construction date of print: 31.10.2018

Customer: ##
Order: ¤¤
Project no.: ¤
Project: Real Equipment and Devices

Part: 133109074 / C-Start_Stop-00 / Extruder

Location:

Rev. Rev.Date Created Checked Description of Revision Crea.Date: 03.09.2018 Knifemotor start/stop - Box 133109074 Project: Real Equipment and Devices Function Unit: <F.No>
B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen Extruder Project no.: ¤ Location:
Checked: Laursen / 03.09.2018 Cover sheet Customer: ## Page: 1 /8 1 /8
Standard: EN 60617 Order: ¤¤ Draw. no.: 18087
 09:43:47
CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|CB10|PAB.2 Approved For Construction date of print: 31.10.2018

1 2 3 4 5 6 7

WARNING
DO NOT OPEN THIS JUNCTION BOX WHEN ENERGIZED
This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting receipt of this drawing does so on the

A A
General Information
express understanding and agreement that it will neither copy, reproduce, disclose to third parties or use this document for any purpose other than those

-These diagrams are shown with optional equipment that might not be installed at the current machine.
However, the junction box does contain terminals and cable glands for all of these options.
-Only use qualified personnel for installation and maintenance of EX-equipment.
-Always comply with relevant national and international regulations.
-For EX-installations always comply with Directive 2014/34/EU, relevant parts of the IEC 60079 Standard series,
with special attention to IEC 60079-14:2013 and IEC 60079-18:2014.
-Always follow the installation instructions and all other relevant instructions published by the manufacturers.
For this junction box, these manufacturers are found in Order list and Parts list.
-Manufacturer instructions for external equipment must also be followed.
B B

Cable Glands
-Apply tightening torques as specified by the cable gland manufacturer.
-Only feed cables within the diameter range specified for the cable gland in question.
-All unused cable glands must be sealed with approved screw plugs.

Cables
-All unused cable cores must be firmly isolated from ground.
-Cables and cable cores for intrinsically safe circuits must NOT be routed in cable trays
together with non-intrinsically safe circuits.
C C
-Only use cables approved for the purpose.

Protective Earth Connection

-Ensure proper PE-connection (both "inside" and "outside") of the junction box according to "Installation and Operating Instructions" for the cabinet.
Note: "Inside" PE conductor through cable gland "P-PE" must be connected at the same connection point as the factory pre-wired
PE-connection between cabinet interior and cabinet door.
expressly agreed to by ANDRITZ AG or one of its affiliates.

References and Flow number

-In these documents, <F.No> will be found. This refers to the Flow reference number, for the specific project.
-For cable labling, when mounting from Machine to Junctionbox, ignore the <F.No> part, unless other information is given!
D D

E E

Rev. Rev.Date Created Checked Description of Revision Crea.Date: 03.09.2018 Knifemotor start/stop - Box 133109074 Project: Real Equipment and Devices Function Unit: <F.No>
B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen Extruder Project no.: ¤ Location:
Checked: Laursen / 03.09.2018 Information Customer: ## Page: 2/8
Standard: EN 60617 Order: ¤¤ Draw. no.: 18087
1 2 3 4 5 6 7
CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|CB10|PAB.3

09:43:47
This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting receipt of this drawing does so on the express understanding and agreement that it will neither copy,
reproduce, disclose to third parties or use this document for any purpose other than those expressly agreed to by ANDRITZ AG or one of its affiliates. Approved For Construction date of print: 31.10.2018

Pages
Label/
Created Checked Revision Document number Document number
Sheet number Unit / Location / Funct. Description 1 Description 2 Description 3 Status ANDRITZ customer

Rev.
date by date by Description

Front matter

1 <F.No> / / Cover sheet Knifemotor start/stop - Extruder 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087
Box 133109074
2 <F.No> / / Information Knifemotor start/stop - Extruder 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087
Box 133109074
3 <F.No> / / Table of contents Knifemotor start/stop - Extruder 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087
Box 133109074

P&ID of junctionbox relevant functions

4 @EX.ST1.02 / / Extruder Extrusion boxes Knifemotor start/stop - 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087
Box 133109074

Loop diagrams

5 <F.No>.HS1 / / HS Circuit diagram Extruder Knife Start/Stop 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087
Operation

Layout drawings

6 <F.No> / <F.No> / Exterior design 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087
Lists

7 <F.No> / <F.No> / Parts list 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087

Lists

8 <F.No> / <F.No> / Orderlist 1 31.10.2018 Laursen B 31.10.2018 Laursen Updated gland size / pos Approved For Construction 18087

Rev. Rev.Date Created Checked Description of Revision Crea.Date: 03.09.2018 Knifemotor start/stop - Box 133109074 Project: Real Equipment and Devices Function Unit: <F.No>
B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen Extruder Project no.: ¤ Location:
Checked: Laursen / 03.09.2018 Table of contents Customer: ## Page: 1 /8 3 /8
Standard: Order: ¤¤ Draw. no.: 18087
 1 2 3 4 5 6 date of print: 31.10.2018

09:43:49
Important note:
This P&ID show only Junctionbox relevant functions.
A For full P&ID of machine, consult project documentation. A

HS
<F.No>.HS1

B B

A B C D
E F G H

C C

D D

Revisions

Revisions
checked
B 31.10.2018 Laursen Updated gland size / pos 31.10.2018 Laursen
Rev. Date Name Quadrant, Description Date Name
Drawn by 03.09.2018 Laursen Ref. doc. no.
Checked 03.09.2018 Laursen Replaces
Model No.
Customer doc. no.
Scale Document Title Document no. Rev. Lang. Sheet

4
Extruder 18087 B EN of

E Extrusion boxes 8 E
CAE 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ
Knifemotor start/stop - Box 133109074 @EX|ST1|02|JPID.4

This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party
Project: Project no.: Customer: Order:
Document number: Rev.: accepting receipt of this drawing does so on the express understanding and agreement that it will neither copy, reproduce, Real Equipment and Devices ¤ ## ¤¤
disclose to third parties or use this document for any purpose other than those expressly agreed to by ANDRITZ AG or
18087 B one of its affiliates. ## Group No.
1 2 3 4 5 6
 09:43:50
CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|HS1|E|PFSS.5 Approved For Construction date of print: 31.10.2018

1 2 3 4 5 6 7

Extruder EX618-1021 Extruder EX618-1021

This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting receipt of this drawing does so on the

A - Knife Start/Stop Operation - Feedback - Knife Start/Stop Operation - Feedback A

DI2 DI1
express understanding and agreement that it will neither copy, reproduce, disclose to third parties or use this document for any purpose other than those

Feedback Stop Feedback Start

digital Input digital Input

-
-
-

-
-
-
IN

IN
COM

COM
VDC

VDC
B B

1
<F.No>.HS1-W2

-
4x1

<F.No>
C C
Extruder

<F.No>-S2 1 <F.No>-S1 4

Push Button NC - Red - Stop Knife Push Button [Green] Start

2 3
expressly agreed to by ANDRITZ AG or one of its affiliates.

D D

E E

Rev. Rev.Date Created Checked Description of Revision Crea.Date: 03.09.2018 Extruder Project: Real Equipment and Devices Function Unit: <F.No>.HS1
B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen Knife Start/Stop Operation Project no.: ¤ HS Location:
Checked: Laursen / 03.09.2018 AEI - v3.1 - Circuit diagram Customer: ## Page: 5/8
Standard: EN 60617 Order: ¤¤ Draw. no.: 18087
1 2 3 4 5 6 7
CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|CB10|0|PED.6 Approved For Construction date of print: 31.10.2018

09:43:51
third parties or use this document for any purpose other than those expressly agreed to by ANDRITZ AG or one of its affiliates.
This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting
receipt of this drawing does so on the express understanding and agreement that it will neither copy, reproduce, disclose to

0
0

Front view Left side view

Start Stop

100

100
-S1

-S2
50

160

90
CB10
C-Start_Stop-00
133109074

Gland pos. Description Cable Remark

A1 JACOB PERFECT M 20x1,5 (9 - 13mm) HS1-W2
Bottom view B1 JACOB PERFECT M 12 x 1,5 (3 - 6mm) P-PE Grounding

A B
90

1
M12
M20
40

60 40

160

All measures in mm

M=1:2

Rev. Rev.Date Created Checked Description of Revision Crea.Date: 03.09.2018 Project: Real Equipment and Devices Function
Unit: <F.No>
B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen Project no.: ¤ Location: <F.No>
Checked: Laursen / 03.09.2018 Layout drawings - Exterior design Customer: ## Page: 6/8
Standard: EN 60617 Order: ¤¤ Draw. no.: 18087
 09:43:52
This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting receipt of this drawing does so on the express understanding and agreement that it will
neither copy, reproduce, disclose to third parties or use this document for any purpose other than those expressly agreed to by ANDRITZ AG or one of its affiliates. CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|CB10|91|ET-PAR.7
Date of print: 31.10.2018
Project name: Real Equipment and Devices Parts list
Project number: ¤ Doc. no.: 18087 for
Project description: # Plant Type - Feed - Pet- Bio Plant Status: Approved For Construction @EX.ST1.02 / Knifemotor start/stop - Box 133109074
Customer: ## Customer
Customer project no.: ¤¤ doc. no.:

Rev.
Unit Location Label Page Path Description Manufacturer Type Part number Remark

<F.No> <F.No> -S1 5 5 Push Button NO - Green - Start Knife TELEMECANIQUE XB5AA31 7517901569
<F.No> <F.No> -S2 5 4 Push Button NC - Red - Stop Knife TELEMECANIQUE XB5AA42 7517901598

Rev. Rev.Date Created Checked Description of Revision Creation date: 03.09.2018

B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen
Checked: Laursen / 03.09.2018
Page: / Of: 1 /8 7 /8
 09:43:53
This document constitutes confidential and proprietary information of ANDRITZ AG and/or its affiliates. Any party accepting receipt of this drawing does so on the express understanding and agreement that it will
neither copy, reproduce, disclose to third parties or use this document for any purpose other than those expressly agreed to by ANDRITZ AG or one of its affiliates. CAE: 0_3_AFB_REAL_EQUIPMENT_AND_DEVICES/GRZ:@EX|ST1|02|010|CB10|91|LI-ORD.8
Date of print: 31.10.2018
Project name: Real Equipment and Devices Orderlist
Project number: ¤ Doc. no.: 18087 for
Project description: # Plant Type - Feed - Pet- Bio Plant Status: Approved For Construction <F.No> / C-Start_Stop-00 - Box 133109074
Customer: ## Customer
Customer project no.: ¤¤ doc. no.:

Rev.
Pcs. Manufacturer Description Type Part number SAP mat. number Remark

2 Label
1 JACOB Hexagonal locknut, M 12x1,5 (15 mm) JACOB 50.2xx Mzzz 50.212 M
1 JACOB Hexagonal locknut, M 20x1,5 (24 mm) JACOB 50.2xx Mzzz 50.220 M B
1 JACOB JACOB PERFECT M 12 x 1,5 (3 - 6mm) JACOB PERFECT M 12x1,5 50.612 M 132589042
1 JACOB JACOB PERFECT M 20x1,5 (9 - 13mm) JACOB PERFECT M 20x1,5 50.620 M 132916472 B
1 RITTAL Button housing, stainless steel, 160/100/90 SM 2384.020 SM 2384.020 132655386
2 SCHNEIDER ELECTRIC Label holder (round , plain, 8x27) ZBZ 32 ZBZ 32
1 TELEMECANIQUE Push Button NO - Green - Start Knife XB5AA31 7517901569
1 TELEMECANIQUE Push Button NC - Red - Stop Knife XB5AA42 7517901598
1 WEIDMÜLLER Switch mark SM 27/18 K MC NE SI 1713760000

Rev. Rev.Date Created Checked Description of Revision Creation date: 03.09.2018

B 31.10.2018 Laursen Laursen Updated gland size / pos Created: Laursen
Checked: Laursen / 03.09.2018
Page: / Of: 1 /8 8 /8