Bonderite C-Ak 5948DPM Eu Aero-En

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Technical Data Sheet

BONDERITE C-AK 5948DPM EU AERO


Known as TURCO 5948 DPM
September-2013

PRODUCT DESCRIPTION Use instructions

BONDERITE C-AK 5948DPM EU AERO provides the Immersion Cleaning: BONDERITE C-AK 5948DPM EU
following product characteristics: AERO may be diluted 1 part cleaner with 3 to 20 parts water,
depending on soil load. Use at 65° to 80°C for 5 to 15
Technology Metal Pretreatment minutes. Ideal for ultrasonic tanks.
Product Type Alkaline Cleaner
Application Immersion process
Control Procedure for BONDERITE C-AK 5948DPM EU
AERO
BONDERITE C-AK 5948DPM EU AERO is an alkaline,
water base, fluorescent compound formulated to effectively Apparatus
clean painted and unpainted aircraft surfaces when diluted ● 100 mL graduated cylinder
with water. ● pH meter
● Buret
● 250 mL beaker
Application Areas:
● Magnetic stirrer

BONDERITE C-AK 5948DPM EU AERO is used for metal Reagents


pretreatment processes. ● 1.0 N sulphuric acid

● Take a sample from the bath, and measure 100 mL


BONDERITE C-AK 5948DPM EU AERO offers these
features: ● Add sample to the beaker, and titrate to pH 8 with 1,0 N
1. For use on all aircraft metals and well bonded paint H2SO4
2. Nonstaining and nonstreaking to aluminum ● Record the amount of mls, and calculate the
3. Readily soluble and stable in water mixtures concentration
4. Free rinsing
5. Ideal for parts cleaning Calculation
6. Pleasant and refreshing odor ● V x 2.06 = % BONDERITE C-AK 5948DPM EU AERO
7. Nonflammable
8. Does not contain phosphates, chromates or butyl
cellosolve

Storage:
Temperature, °C 0 to 40
TECHNICAL DATA Shelf-life (in unopened original packaging), 24
months
(as supplied):
Appearance blue liquid
Classification:
pH-value 11.4 to 12.2
Please refer to the corresponding Material Safety Data
Density, g/mL 1.006 to 1.026
Sheets for details on:
Hazards identification
Transport information
DIRECTION OF USE
Regulatory information
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data
Sheet for information about precautionary measures and
safety recommendations. Also, for chemical products exempt
from compulsory labeling, the relevant precautions should
always be observed. Please also refer to the local safety
instructions and contact Henkel for analytical support.
TDS BONDERITE C-AK 5948DPM EU AERO , September-2013

ADDITIONAL INFORMATION
Disclaimer
Note:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. The
product can have a variety of different applications as well as differing
application and working conditions in your environment that are beyond our
control. Henkel is, therefore, not liable for the suitability of our product for the
production processes and conditions in respect of which you use them, as well
as the intended applications and results. We strongly recommend that you
carry out your own prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any
other written or oral recommendation(s) regarding the concerned product is
excluded, except if otherwise explicitly agreed and except in relation to death
or personal injury caused by our negligence and any liability under any
applicable mandatory product liability law.

In case products are delivered by Henkel Belgium NV, Henkel Electronic


Materials NV, Henkel Nederland BV, Henkel Technologies France SAS
and Henkel France SA please additionally note the following:
In case Henkel would be nevertheless held liable, on whatever legal ground,
Henkel’s liability will in no event exceed the amount of the concerned delivery.

In case products are delivered by Henkel Colombiana, S.A.S. the


following disclaimer is applicable:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. Henkel is,
therefore, not liable for the suitability of our product for the production
processes and conditions in respect of which you use them, as well as the
intended applications and results. We strongly recommend that you carry out
your own prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any
other written or oral recommendation(s) regarding the concerned product is
excluded, except if otherwise explicitly agreed and except in relation to death
or personal injury caused by our negligence and any liability under any
applicable mandatory product liability law.

In case products are delivered by Henkel Corporation, Resin Technology


Group, Inc., or Henkel Canada Corporation, the following disclaimer is
applicable:
The data contained herein are furnished for information only and are believed
to be reliable. We cannot assume responsibility for the results obtained by
others over whose methods we have no control. It is the user's responsibility to
determine suitability for the user's purpose of any production methods
mentioned herein and to adopt such precautions as may be advisable for the
protection of property and of persons against any hazards that may be
involved in the handling and use thereof. In light of the foregoing, Henkel
Corporation specifically disclaims all warranties expressed or implied,
including warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Henkel Corporation’s products.
Henkel Corporation specifically disclaims any liability for consequential
or incidental damages of any kind, including lost profits. The discussion
herein of various processes or compositions is not to be interpreted as
representation that they are free from domination of patents owned by others
or as a license under any Henkel Corporation patents that may cover such
processes or compositions. We recommend that each prospective user test
his proposed application before repetitive use, using this data as a guide. This
product may be covered by one or more United States or foreign patents or
patent applications.

Trademark usage: [Except as otherwise noted] All trademarks in this


document are trademarks and/or registered trademarks of Henkel and its
affiliates in the U.S. and elsewhere.

Reference 0.0

Henkel AG & Co. KGaA Henkel Corporation USA Henkel (China) Co. Ltd.
40191 Düsseldorf, Germany Madison Heights, MI 48071 201203 Shanghai, China
Phone: +49-211-797-0 Phone: +1-248-583-9300 +86.21.2891.8000
For more information, please contact us on www.henkel.com

You might also like