Pneumatic Tyred Roller

BW 24 RH/BW 27 RH
BW 24 RH and BW 27 RH Pneumatic Tyred Rollers
Traditional compaction technology – with hydrostatic drive

Simple Operation ROPS Cab

– Clear dashboard layout – Optimum visibility (1m x 1m)
– Driving/braking control as – Swivel/sliding seat
in automotive design – Low noise level
– Choice of 3 travel speeds

Powerful Drive
– Reliable engine
Large Capacity Diesel – Easy access
Tank – Environmentally friendly
– Easy access
– Over 12 hours operation

Water Tank (Plastic)

– For wheel sprinkler system

Drainage for Water Hydrostatic Drive

Ballast (Optional) Access Steps – 2 hydraulic motors
– Easy and fast – Effortless – Sensitive; smooth handling
and safe – 2 multi-disc brakes for parking
and dynamic service brake
Automatic Tyre-Inflation System
(Optional)
– Flexible pressure adjustment on
Emptying Ballast
the run
– Large openings on both
– Safety valves prevent total air loss on
sides
all tyres through leakage
Steering Axle
– 2 steering pivots with axle
and wheel hub oscillation
– Uniform compaction across
the working width
– Good conformity on uneven
surfaces
 Flexible, Low-Cost Compaction
Drive concept: efficient and safe Application areas:
The BW 24 RH / BW 27 RH BOMAG pneu- BOMAG pneumatic tyred rollers are used for
matic tyred rollers combine traditional com- a wide range of compaction work.
paction technology with a modern hydrosta- This includes:
tic drive. The rear axle is now driven by two • Soil and asphalt
hydraulic motors. This system is efficient • Compaction of stabilized soil layers
and optimizes operating and maintenance • Rolling chippings on surface dressing.
costs. Two complete operator platforms with swivel/sliding
seat make work more efficient and give good visibility.

Automotive controls: Kneading and rolling effect of the

The pneumatic tyred rollers are driven using wheels:
gas pedal and brakes as in conventional cars. Pneumatic tyred rollers achieve a high level
The hydrostatic drive also gives highly sen- of compaction quality from the kneading and
sitive control when manoeuvring. This is rolling effect of the wheels. Highly uniform
important for smooth reversing. However, the compaction is produced which also gives a
system also sets new standards with regard dense finish at the surface. The heavy weight
to safety: e.g. by using the dynamic service of the rollers (up to 27 t) generates a vertical
brakes. These are maintenance-free, heavy- pressure combined with horizontal forces
duty and supplement the hydrostatic brake acting in all directions beneath the tyres.
effect.

Sensitive speed control using a hydrostatic drive.

The BW 24 RH and BW 27 RH are flexible pneumatic tyred rollers for compaction work in asphalt and earthworks.
Easy and quick to service: The engine is easily
accessible from all sides.
Simple to operate: Flexible Weight Adjustment:
As is typical on BOMAG machines, all opera- The BW 24 RH and BW 27 RH BOMAG rollers
ting controls are within easy reach. The can be adjusted to provide the specified weight
dashboard is clearly arranged for more safe- for the job. To achieve this, different ballasting
ty and efficiency. The operator’s platform has options are available. The rollers can be pre-
a swivel/sliding seat and two steering wheels. ballasted with individual weights (attached
Precise rolling along edges or high-speed under the frame). The large ballast space
transport over surfaces is safely mastered. (approx. 3.5 m 3) is usually filled with sand or
steel scrap for flexible weight adjustment. With
the watertight, welded frame option, the rollers
can also be ballasted with water.

Standard equipment: pressurized sprinkling produces

even wetting – regardless of gradients or water tank
level.
 The experience of the market leader
The advantages: The correct contact pressure: BOMAG provides local service
• Good visibility: the roller complies with The success of compaction work is primarily and support no matter where your
next contract is located.
1m x 1m visual range legislation determined by the correct contact pressure.
• Efficient hydrostatic drive; sensitive speed Accordingly, the pressure in the tyres can be As world market leader in com-
control varied within a range of 2 – 8 bar. Higher air paction equipment, we offer you
• Simple servicing and low maintenance pressure produces better compaction depth the widest range of products
backed by expert support and
costs effect which is important for thicker soil and
advice aimed at keeping your
• Flexible weight adjustment from 8.5 to 24 t asphalt layers. Lower tyre pressures are sui- operation profitable.
and 13 to 27 t table for thin cover layers. In principle, the air
• Easy water ballasting (optional) pressure is adjusted to give even surface Modern manufacturing plants in
contact by the tyres; a curved profile should Germany, USA and China together
with licencees and partners
Special compaction: be avoided. around the world supply BOMAG
• Automatic tyre inflation system for quick rollers to global markets.
adjustment of the internal tyre pressure
(optional) Regional customer care is centred
on six branches in Germany, eight
•Careful compaction of thin layers or shift
subsidiaries in Austria, Canada,
sensitive mixes China, France, Great Britain,
•Especially dense, close-knit surface finish Italy, Japan and USA, one sales
•Good wheel track overlap Air pressure too high Air pressure correct Air pressure too low
office in Singapore and over 500
independent BOMAG dealers.

BOMAG Service. Everywhere and

for every need. Our branches
and dealers are backed by
BOMAG’s Central Parts ware-
house where about 40,000 parts
are held against customer require-
ments. You expect top service
from BOMAG. We aim to provide it.
Even weight distribution on each tyre.
Quality! For the paint finish of the
machine BOMAG as far as possible
uses a high quality environmentally
friendly powder coating, which
excels by its excellent resistance
against corrosion, scratching and
ultraviolet light.

BOMAG. The world’s foremost

Design feature protecting against overturning thanks to level compensator. compaction company.

BW 24/27 RH – Level compensator.

Die abgebildeten Maschinen besitzen teilweise Sonderausstattungen, die gegen Aufpreis lieferbar sind. Änderungen bei Konstruktion, Form und Lieferumfang sowie
The machines illustrated
Abweichungen im Farbtonmay showvorbehalten.
bleiben optional equipment which can be supplied at additional cost. Specifications may change without notice.

• Head Office/Hauptsitz:
BOMAG, Hellerwald, 56154 Boppard, GERMANY, Tel.: +49 6742 100-0,
Fax: +49 6742 3090, e-mail: [email protected]
• BOMAG Maschinenhandelsgesellschaft m.b.H., Porschestraße 9, 1230 Wien, AUSTRIA,
Tel.: +43 1 69040-0, Fax: +43 1 69040-20, e-mail: [email protected]
• BOMAG (CANADA), INC., 3455 Semenyk Court, Mississauga, Ontario L5C 4P9, CANADA,
Tel.: +1 905.361.9961, Fax: +1 905.361.9962, e-mail: [email protected]
• BOMAG (CHINA) Compaction Machinery Co. Ltd., No. 2808 West Huancheng Road,
Shanghai Comprehensive Industrial Zone (Fengxian), Shanghai 201401, CHINA,
Tel.: +86 21 33655566, Fax: +86 21 33655505, e-mail: [email protected]
• BOMAG FRANCE S.A.S., 2, avenue du Général de Gaulle, 91170 Viry-Châtillon, FRANCE,
Tel.: +33 1 69 57 86 00, Fax: +33 1 69 96 26 60, e-mail: [email protected]
•
346

BOMAG (GREAT BRITAIN), LTD., Sheldon Way, Larkfield, Aylesford, Kent ME20 6SE, GREAT BRITAIN,
106063

Tel.: +44 1622 716611, Fax: +44 1622 718385, e-mail: [email protected]
• BOMAG Kereskedelmi Kft., PC Alkotmány u. 16, 2051 Biatorbágy, HUNGARY,
Tel.: +36 23 530 368, Fax: +36 23 530 369, e-mail: [email protected]
PRE108

• BOMAG Italia Srl., Z.I. - Via Mella 6, 25015 Desenzano del Garda (Bs), ITALY,
Tel.: +39 030 9127263, Fax: +39 030 9127278, e-mail: [email protected]
• BOMAG Japan Co., LTD., Oval Court Ohsaki Mark West Bldg. 8th floor, 2-17-1, Higashi Gotanda, Shinagawa-ku,
03/06PRF

Tokyo, JAPAN, 141-0022, Tel: +81 3 5449 7560, Fax: +81 3 5449 0160, e-mail: [email protected]
• BOMAG Polska Sp. z o.o., Ul. Szyszkowa 52, 02-285 Warszawa, POLAND,
Tel.: +48 22 482 04 00, Fax: +48 22 482 04 01, e-mail: [email protected]
•
02/05

BOMAG GmbH, 300 Beach Road, The Concourse, #38-03, Singapore 199555, SINGAPORE,
Tel.: +65 6 294 1277, Fax: +65 6 294 1377, e-mail: [email protected]
• BOMAG Americas, Inc., 2000 Kentville Road, Kewanee, Illinois 61443, U.S.A., Tel.: +1 309 8533571,
Fax: +1 309 8520350, e-mail: [email protected]

+ www.bomag.com + www.bomag.com + www.bomag.com + www.bomag.com +