KICE INDUSTRIES Spout Manual

Skilled Air for Industry
Speed Spout Manual

Product Data Sheet SS-12
S P E E D S P O U T M A N UA L
Series 20 Series 30
31 32 33 34 35 36
Series 10
25
26M Series 40
11
27
41 42 43 44 45 46 47
12
28
Series 50
29
14 55A
51 52 53 54 55A Automated
Series 50/60
56 57 67 68
Series 70
71-2 79N 79NL 79NLV
71-3 72 73 74 75 76 77 78
Series 80
81
87 89
Type C & E Camlocks 82 86 84 88 Angle Ring Flange
Series 90
96
93
91 94 97 SGH
95
[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Table of Contents
ELBOWS SIGHT GLASSES

Kice Formed Long Sweep Tube Elbows 4 71/72/73 Sight Glasses 27
Extended Tangent Flat Back Elbows 5
LIDS, CAPS, PLUGS & SPOUTS
11 & 12 Elbows 6
74/75/76/77 Fittings 28
Standard Long Radius Elbows 7
78/79N/79NL Fittings 29
14 Short Radius Elbows 8
Special Long Sweep Tube Elbows & 9
COUPLINGS AND CLAMPS
Stand-T Ells
81S/84A/86N Couplings & Clamps 30
Ceram-Back Elbow 9
82M Heavy Duty Tube OD Compression 31
Couplings
ADAPTERS
Kice 82M Heavy Duty Pipe Compression 32
25/26M/26F Adapters 10
Couplings
27/28/29 Adapters 11
FLANGES & SUPPORT RINGS
TRANSITIONS
87A/88A/89 Flanges & Support Rings 33
31/32/33 Transitions 12
Kice Angle Ring Flanges 34
34/35/36 Transitions 13
91/93 Miscellaneous Fittings 35
BRANCH FITTINGS
MAGNET SECTIONS
41/42/43/44 Branch Fittings 14
94 Manual Gravity Flow Magnet Section 36
45/46/47 Branch Fittings 15
MISCELLANEOUS COMPONENTS
GRAVITY VALVES
95 Damper & 96 Tattle Tale Fittings 37
51/52/53 Gravity Diverter Valves 16
97/Null Point Fittings/97/99 38
54 Dual Gravity Diverter Valves 17
SGH Streamguard Blender Fitting 39
55A Spout Diverter Valves 18
Porthole Sight Glass Assemblies 40
56 Bucket Valve 19
HOSE & CAMLOCKS
SLIDE GATE VALVES
Hose & Hose Connections Products 41
57GM Slide Gate Valves 20
Camlock Connections 42
58GM Slide Gate Valves 21
58GA Slide Gate Valves 22 DATA & DIMENSIONS
Automated Controls Package Specifications 23 Materials of Construction, Tube Data, & 45
Useful Formulas
DIVERTER & BIN FILL VALVES
Pipe and Flange Dimensions 46
67Q, 2-way Diverter Valves 24
Kice Round & Square Flange 47
67Q, 3-way Diverter Valves 25
Dimensions
68Q Bin Fill Valves 26
[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Kice Formed Long Sweep Tube Elbows

Smooth bore, formed long radius 45° and 90° elbows in Aluminum, C.S. or Stainless Steel in sizes 2"OD
through 8"OD readily available. Additional sizes, gauges, and angles available upon request.
T
FORMED LONG SWEEP 90˚ TUBE ELBOWS
Elbows are die formed to prevent egg-shape cross section. Common
centerline radii, materials, and wall thicknesses shown below. Call for D
special requirements.
90˚
CENTERLINE RADII GAUGE T

ANGLE D (OD) MIN / MAX (NOMINAL)
2'-0" 3'-0" 4'-0"
2 2A2 - 90 3A2 - 90 4A2 - 90 16 or 11 4 CLR
2.5 2A2.5 - 90 3A2.5 - 90 4A2.5 - 90 16 or 11 5
3 2A3 - 90 3A3 - 90 4A3 - 90 16 or 11 6
3.5 2A3.5 - 90 3A3.5 - 90 4A3.5 - 90 16 or 11 7
90˚
T
4 2A4 - 90 3A4 - 90 4A4 - 90 16 or 11 8
4.5 2A4.5 - 90 3A4.5 - 90 4A4.5 - 90 14 or 11 9
5 2A5 - 90 3A5 - 90 4A5 - 90 14 or 11 10
6 2A6 - 90 3A6 - 90 4A6 - 90 14 or 11 12
8 — — 4A8 - 90 14 or 11 16
“A” in part number specifies Aluminum material. Specify “B” for Steel and “S” for 304L Stainless Steel. Not all sizes available in all materials or centerlines.
Other centerlines and gauges available. Due to the manufacturing processes, overall tangent length may vary. To determine Kice part number =
Centerline-Material-Size-Bend Degree-Gauge. Example: Kice PN 4A5-90-14 = 4' (48") centerline, Aluminum, 5"OD, 90° elbow, .083" (14 ga.) wall
T
FORMED LONG SWEEP 45˚ TUBE ELBOWS
Elbows are die formed to prevent egg-shape cross section. Common centerline radii,
materials, and wall thicknesses shown below. Call for special requirements.
CENTERLINE RADII GAUGE T 45˚

ANGLE D (OD) MIN / MAX (NOMINAL)
2'-0" 3'-0" 4'-0"
2 2A2 - 45 3A2 - 45 4A2 - 45 16 or 11 4 CLR
2.5 2A2.5 - 45 3A2.5 - 45 4A2.5 - 45 16 or 11 5
3 2A3 - 45 3A3 - 45 4A3 - 45 16 or 11 6
T
3.5 2A3.5 - 45 3A3.5 - 45 — 16 or 11 7
45˚ 4
4.5
2A4 - 45
—
3A4 - 45
3A4.5 - 45
4A4 - 45
—
16 or 11
14 or 11
8
9
D
5 — 3A5 - 45 4A5 - 45 14 or 11 10
6 — 3A6 - 45 4A6 - 45 14 or 11 12 A = ALUMINUM
B = STEEL
8 — — 4A8 - 45 14 or 11 16 S = 304 STAINLESS STEEL
“A” in part number specifies Aluminum material. Specify “B” for Steel and “S” for 304L Stainless Steel. Not all sizes available in all materials or
centerlines. Other centerlines and gauges available. Due to the manufacturing processes, overall tangent length may vary. To determine Kice part
number = Centerline-Material-Size-Bend Degree-Gauge. Example: Kice PN 3B4-45-11 = 3' (36") centerline, Steel, 4"OD, 45° elbow, 11" ga. wall.
4 [email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Extended Tangent “T” Series Flat Back Elbows

Flat Back Elbows with extended discharge tangent available in Steel in sizes 2" through 12"OD.
Standard angles include 45° and 90°. Additional sizes, gauges, tangents and angles available
upon request.
EXTENDED TANGENT “T” SERIES FLAT BACK 45° AND 90° ELBOWS
TYPE “F”
D FLOW
ALL WELDED .1875" THK AR
CONSTRUCTION STEEL BACK
L C RADIUS
D x .8125 T
10 GA. MILD STEEL
(SIDE & THROAT) 90˚ 60˚
D
45˚
30˚
APPROX. BACKLINE RADII
ANGLE D (ZOD) L T C
3'-0" 4'-0"
3 3FT3 - 90 — 4.5 3 18
— D
4 3FT4 - 90 5 3 18
5 3FT5 - 90 — 7 3 18 The extended tangent on the discharge
90˚ 6
8
3FT6 - 90
—
—
4FT8 - 90
9
12
3
4
18
24
end protects the discharge transition from
wear as the conveyed material comes off
the flattened bend. Kice “T” series Flat Back
10 — 4FT10 - 90 12 4 24 elbows are marked with a directional arrow
and available in 3'0" & 4'0" backline radii.
12 — 4FT12-90 18 6 24
Recommended where wear is a problem.

3 3FT3 - 45 — 4.5 3 18 Flat Back elbows, like their name implies,
4 3FT4 - 45 — 5 3 18 have a flat, wide back to spread wear. The
5 3FT5 - 45 — 7 3 18 cross section area of the elbow is equal to
45˚
the area of the collar. Kice Flat Back elbows
6 3FT6 - 45 — 9 3 18 are manufactured with 10 ga. Steel sides and
8 — 4FT8 - 45 12 4 24 throat and .1875" thick AR (Abrasion Resistant)
10 — 4FT10 - 45 12 4 24 Steel back. This special alloy outlasts
ordinary steel up to 200%. Transitions back to
12 — 4F12 - 45 18 6 24 round OD collars are 11 ga. carbon steel.
Available in Steel only. Flat back elbows measured along backline, not centerline. Not Flat Back elbows are fabricated per order
directly interchangeable with formed elbows. To determine Kice part number = Backline- and can be supplied in almost any size,
Style-Size-Bend Degree. Example: Kice PN 3FT4-90 = 3' backline, Steel, Type “FT” Welded
back, 4"OD, 90° elbow.
radius, and/or angle.
TYPE “F” - The AR Steel back and transitions are solidly welded to throat and side plates. The back can be
replaced by welding. This is the most practical flat back elbow.
[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com 5

Series 11 & 12 Elbows

Short radius elbows for gravity spouting. See items for specific description.
#11 FREE FLOW CAST ELBOWS #12 ROTAJUST ELBOWS

D
Available in all angles from Adjustable from 0˚ to 60˚
5˚ to 45˚ in 5˚ increments, in
three diameters, 4", 5" and T 10˚ • Machined surfaces of two
6" OD, and two materials R = 1" identical halves are drawn tightly
- cast aluminum and cast together by stainless steel clamp
iron. A total of 36 single Y when set at the required angle.
piece elbows plus the six
Rotajust elbows - A total of ANGLE • Diameters match US Standard Tube
42 coordinated types and OD in 4", 5", 6" and 8"OD.
sizes to handle practically • Available in Aluminum alloy and
any gravity flow job. Cast Grey Iron.
T .15625" TYP • Aluminum never rusts, is lightweight, excellent
Smoothly curved surfaces
.0625" appearance, very smooth internal surface for stock
inside and out assure good
flow and weldable.
stock flow and excellent
sanitation. No segment Note: Wall in curved area is double • Cast Grey Iron is wear resistant.
angles or rough joints. thickness for extra wear protection.
• Formed with double thickness wall in curved area
for extra wearability.
CAST
SKETCH ANGLE D Y T ALUM. IRON • Smooth full round curved ends - no angular segments.
PART NO. PART NO.
• Joins to tube and/or other fittings with single band
4 4.5 1.5 11A4-05 — clamp couplings or compression couplings.
5˚ 5 5.5 2 11A5-05 —
• Banded butt joints are machined smooth and sanitary.
6 6.5 2.5 11A6-05 —
4 4.5 1.5 11A4-10 —
10˚ 5 6 2 11A5-10 — D STAINLESS STEEL CLAMP
RING WITH #10-24 BOLT
& NUT
6 6.75 2.5 11A6-10 —
4 4.75 1.5 11A4-15 11B4-15 R = 1"
15˚ 5 6 2 11A5-15 11B5-15 Y
L
6 7 2.5 11A6-15 11B6-15 ANGLE
4 5 1.5 11A4-20 —
20˚ 5 6.5 2 11A5-20 —
6 7.25 2.5 11A6-20 — T MACHINED SURFACES
F (OFFSET)
.15625" TYP (NOTE:
4 5.25 1.5 11A4-25 — EXTRA THICKNESS AT
.0625"
BEND)
25˚ 5 6.5 2 11A5-25 —
6 7.5 2.5 11A6-25 — SHOWN AT MAXIMUM ROTATED TO MINIMUM
4 5.25 1.5 11A4-30 11B4-30 ANGLE - 60˚ ANGLE - 0˚
30˚ 5 6.75 2 11A5-30 11B5-30

6 7.5 2.5 11A6-30 11B6-30 PART NO. DIMENSIONS
4 5 1.5 11A4-35 — CAST D
ALUMINUM L B Y F
35˚ 5 6.25 2 11A5-35 — IRON (OD)
6 8 2.5 11A6-35 — 12A4 12B4 4 7.25 7.25 6.125 .875

4 5.5 2 11A4-40 — 12A5 12B5 5 8.75 8.75 7.125 1
40˚ 5 6.75 2.5 11A5-40 — 12A6 12B6 6 10.25 10.25 8.125 1.125
6 7.875 2.75 11A6-40 — — 12B8 8 12 12 9.75 1.75
4 5.625 2 11A4-45 11B4-45
"A" in part number specifies Aluminum material. Specify "B" for
45˚ 5 6.75 2.5 11A5-45 11B5-45 Cast Iron. Cast Iron only in 8"OD.
6 8 3 11A6-45 11B6-45
"—" indicates not available in Cast Iron

Standard Long Radius Elbows
PART NO. (EXAMPLE) 3 B 4 - 9 0 - 1 6
Centerline Radius of Elbow Material thickness in gauge

in Feet 3 = 36" CLR or pipe schedule
Material of Construction Degree of bend
A = Aluminum
B = Carbon Steel
S = Stainless Steel
OD of Elbow in Inches
3B4-90-16 Elbow = 36"CLR, Carbon Steel, 4"OD, 90deg, 16ga Elbow
PART NO. D (OD) GAUGE B R T
2B2-90-16 2" 16GA 28" 24" 4"
2B2.5-90-16 2.5" 16GA 29" 24" 5"
2B3-90-16 3" 16GA 30" 24" 6"
2B3.5-90-11 3.5" 11GA 31" 24" 7"
3B4-90-16 4" 16GA 44" 36" 8"
3B4.5-90-14 4.5" 14GA 45" 36" 9"
3B5-90-14 5" 14GA 46" 36" 10"
3B6-90-14 6" 14GA 48" 36" 12"
4B8-90-11 8" 11GA 64" 48" 16"
PART NO. D (OD) GAUGE X Y R T
2B2-45-16 2" 16GA 9.875 25.750 24" 4"
2B2.5-45-16 2.5" 16GA 10.500 27.500 24" 5"
2B3-45-16 3" 16GA 11.250 27.250 24" 6"
2B3.5-45-11 3.5" 11GA 11.875 31.375 24" 7"
3B4-45-16 4" 16GA 16.250 39.125 36" 8"
3B4.5-45-14 4.5" 14GA 16.875 40.875 36" 9"
3B5-45-14 5" 14GA 17.500 42.500 36" 10"
3B6-45-14 6" 14GA 19.125 49.750 36" 12"
4B8-45-11 8" 11GA 25.375 61.250 48" 16"

14 Short Radius Elbows

Smooth bore, formed short radius 45° and 90˚ elbows in Aluminum or Steel. 2"OD through 8"OD
readily available. Stainless Steel available on special order. Additional sizes, gauges, and angles
available upon request.
#14 SHORT RADIUS FORMED 90° ELBOWS

Kice short radius, formed 90˚ elbows are available in Aluminum and
Steel. Centerline radius dimensions vary from size to size. Used primarily B
for dust control, vacuum sweeper systems, and clean air applications.
PART NO. D (OD) GAUGE B R T

14A2-90-16 2" 16 13 9 4
90˚
14A2.5-90-16 2.5" 16 14 9 5
B
14A3-90-16 3" 16 15 9 6
14A3.5-90-16 3.5" 16 16 9 7
14A4-90-16 4" 16 18 10 8
14A4.5-90-11 4.5" 11 21 12 9
14A5-90-14 5" 14 22 12 10
D
14A6-90-14 6" 14 27 15 12
14B8-90-15 8" 15 26 12 14
"A" in part number specifies Aluminum material. Specify "B" for Steel. Note: Centerline radius and tangent length may vary due
Steel only in 7"OD and 8"OD. to manufacturing tolerances.
X
#14 SHORT RADIUS FORMED 45° ELBOWS
Kice short radius, formed 45° elbows are available in Aluminum and
Steel. Centerline radius dimensions vary from size to size. Used primarily
for dust control, vacuum sweeper systems, and clean air applications.
PART NO. D (OD) GAUGE X Y R T

45˚
14A2-45-16 2" 16 5.375 13.250 9 4
14A2.5-45-16 2.5" 16 6.250 14.875 9 5 Y
14A3-45-16 3" 16 6.875 16.625 9 6
14A3.5-45-16 3.5" 16 7.500 18.375 9 7
14A4-45-16 4" 16 8.500 20.750 10 8
14A4.5-45-11 4.5" 11 9.875 23.875 12 9
14A5-45-14 5" 14 10.500 25.500 12 10
14A6-45-14 6" 14 12.875 31.125 15 12
14B8-45-15 8" 15 14.875 35.875 12 16 D
"A" in part number specifies Aluminum material. Specify "B" for Steel. Specify "S" Note: Centerline radius and tangent length may vary due
for Stainless Steel. Steel only in 7"OD and 8"OD. to manufacturing tolerances.

Special Long Sweep Tube Elbows & Sand-T Ells

Kice purchases many special smooth bore, formed long radius elbows. Hard ceramic is commonly
applied to these fittings for extended wear life. Materials include Aluminum, Steel, and/or Stainless
Steel. In addition, Kice offers a Sand-T Ell designed to provide long life for a low price.
CERAM-BACK ELBOWS
Designed to eliminate unwanted costs such as maintenance,
loss of material, and downtime, the "Ceram-Back"® elbow
OUTER STEEL
replaces the conventional elbow and is manufactured to
SHELL BACK
remain on a system much longer, thus reducing costs and
maintaining production. STEEL ELBOW
CROSS SECTION
The "Ceram-Back"® elbow has a jacket across the back of the
core elbow which is approximately 1/2" of ceramic compound.
This compound has a Mohs hardness of 9+, second only to
diamond, which has a Mohs hardness of 10. The ceramic
jacket and core elbow is then wrapped with an exterior STEEL ELBOW
material to maintain hoop strength. Once the core elbow has CROSS SECTION
worn through, the abrasion is then transferred to the ceramic
outer jacket. The metal core also acts as a static conductor.
KICE SAND-T ELLS

Kice Sand-T Ells are designed for material-on-material impact to protect internal
steel surfaces from abrasion and wear at a turn. Ell ends couple directly to an
OD tube.
Note: 45 degree Sand-T Ells available upon request.
PART NO. D (OD) B R T
SANDELL2 2" 5.5" 3" 9.5"
SANDELL2.5 2.5" 6" 3" 10.5"
SANDELL3 3" 6.375" 3" 11.75"
SANDELL4 4" 7.125" 3" 13.75"
SANDELL5 5" 7.875" 3" 15.75"
SANDELL6 6" 8.625" 3" 17.75"
SANDELL8 8" 11" 3" 22"
SANDELL10 10" 13.5" 3" 27"
SANDELL12 12" 16" 3" 32"

Series 25/26M/26F Adapters

L
Adapter fittings are available from stock in Aluminum or
Steel. Stainless Steel available on special order. Standard
material thickness is 16 ga. Fittings are butt welded
without laps. Additional sizes, designs, gauges, and D O
angles available upon request.
#25 TUBE OD TO TUBE OD REDUCING ADAPTER

T
For connecting different sizes of OD tubing. T
PART NO. D (OD) O (OD) L T PART NO. D (OD) O (OD) L T

25A1.5-2 1.5 2 12 3 25A3.5-4 3.5 4 12 3
25A2-2.5 2 2.5 12 3 25A3.5-5 3.5 5 12 3
25A2-3 2 3 12 3 25A4-4.5 4 4.5 12 3
25A2-4 2 4 12 3 25A4-5 4 5 12 3
25A2.5-3 2.5 3 12 3 25A4-6 4 6 12 3
25A2.5-4 2.5 4 12 3 25A4.5-5 4.5 5 12 3
25A3-3.5 3 3.5 12 3 25A5-5.5 5 5.5 12 3
25A3-4 3 4 12 3 25A5-6 5 6 12 3
25A3-4.5 3 4.5 12 3 25A5.5-6 5.5 6 12 3
25A3-5 3 5 12 3 25A5-8 5 8 12 3
25A3-6 3 6 12 3 25A6-8 6 8 12 3
“A” in part number specifies Aluminum material. Specify “B” for Steel and “S” for 304L Stainless Steel. Call out smaller size first in part number.
#26M TUBE OD TO NPT-MALE ADAPTER #26F TUBE OD TO NPT-FEMALE ADAPTER
L
L
D D
O (NPT - MALE) O (NPT - FEMALE)
PART NO. D (OD) O L PART NO. D (OD) O L

26MA2-2 2 2" MPT - MALE 8 26FA2-2 2 2" FPT - FEMALE 8
26MA2.5-2.5 2.5 2.5" MPT - MALE 8 26FA2.5-2.5 2.5 2.5" FPT - FEMALE 8
"A" in part number specifies Aluminum material. Specify "B" for Steel "A" in part number specifies Aluminum material. Specify "B" for Steel
and "S" for 304L Stainless Steel. and "S" for 304L Stainless Steel.
For connecting OD tubing to Female Pipe Thread (NPT- Female). For connecting OD tubing to Male Pipe Thread (NPT- Male).
Reducing sizes available as special order. Reducing sizes available as special order.

Series 27/28/29 Adapters

Adapter fittings are available from stock in Aluminum or Steel. Stainless Steel available on special order.
Standard material thickness is 16 ga. Fittings are butt welded without laps. Additional sizes, designs,
gauges, and angles available upon request.
#27 TUBE OD TO METRIC TUBE ADAPTER

Kice manufactures many special fittings
L for customers and welcomes your inquiries.
Other fittings we manufacture, but are
not shown, include crosses, TY’s, welded
manifolds, and special angles, lengths,
D A materials and wall thicknesses. Contact
Kice Industries for pricing information.
For connecting OD tubing to Metric tubing.

Specify Tube OD and wall thickness and Metric
Tube OD and wall thickness For detailed information
on Kice Cyclone
PART NO. D (OD) A L Collectors, request Kice
27A2- 2 SPECIFY 8 Data Sheet IF-2.
27A2.5- 2.5 SPECIFY 8
27A3- 3 SPECIFY 8
27A4- 4 SPECIFY 8
27A5- 5 SPECIFY 8
27A6- 6 SPECIFY 8
“A” in part number specifies Aluminum material. Specify “B”
for Steel and “S” for 304L Stainless Steel.
L L
#28 TUBE OD TO FLANGE #29 TUBE OD TO ANSI 150#
ADAPTER FLANGE ADAPTER
For connecting OD tubing to For connecting OD tubing to
flange or for mating to floor. standard ANSI 150# flange.
Bolt holes drilled when specified. Standard tube construction is

D O 11 ga. steel. Reducing sizes BC O
D
.125" thick flange is standard, .1875" also available.
and .25" thick available on special
order. Reducing sizes also available.
.125"
.25"
PART NO. D (OD) L O THK BOLT CIRCLE (BC) PART NO. D (OD) L O THK # OF HOLES, DIA. & BC
28A3 3 4 6 .125" UNDRILLED/BLANK 29B3 3 4 7.5 .25" 4 EA .75" ON 6" BC
28A4 4 4 7 .125" UNDRILLED/BLANK 29B4 4 4 9 .25" 8 EA .75" ON 7.5" BC
28A8 8 4 11 .125" UNDRILLED/BLANK 29B8 8 4 13.5 .25" 8 EA .875" ON 11.75" BC
“A” in part number specifies Aluminum material. Specify “B” for Steel
“B” in part number specifies Steel Material. Specify “S” for 304
and “S” for 304L Stainless Steel.
Stainless Steel. Aluminum available on special order.
[email protected]
[email protected] || Toll-Free:
Toll-Free: 877.289.5423
877.289.5423 || Fax: 316.295.2411 | kice.com
Fax: 316.295.2411 kice.com 11
Series 31/32/33 Transitions

Square-to-Round transition fittings in Aluminum or Steel. All joints butt welded without laps. Standard
material thickness is 16 ga. with 1.5" wide x .134" (10 ga.) thick flange; not drilled. Additional sizes, flange
widths, and materials available upon request.
1.5"
#31 SQUARE-TO-ROUND 1.5" S (SQUARE) #32 SQUARE-TO-ROUND
TRANSITION WITH TRANSITION WITH 30˚
Y
STRAIGHT COLLAR COLLAR
L T
T
D 30.00˚
PART NO. D (OD) S T L PART NO. D (OD) S T Y

31A3-4 3 4 2 6 32A3-4 3 4 2 4
31A4-4 4 4 2 6 32A4-4 4 4 2 4
31A4-5 4 5 2 6 32A4-5 4 5 2 4
31A4-6 4 6 2 6 32A4-6 4 6 2 4
31A4-8 4 8 2 6 32A4-8 4 8 2 4
31A5-5 5 5 2.5 6.5 32A5-5 5 5 2.5 4
31A5-6 5 6 2.5 6.5 32A5-6 5 6 2.5 4
31A5-8 5 8 2.5 6.5 32A5-8 5 8 2.5 4
31A6-6 6 6 3 7 32A6-6 6 6 3 4
31A6-8 6 8 3 7 32A6-8 6 8 3 4
31A8-8 8 8 4 8 32A8-8 8 8 4 4
“A” in part number specifies Aluminum material. Specify “B” “A” in part number specifies Aluminum material. Specify “B”
for Steel and “S” for 304L Stainless Steel. for Steel and “S” for 304L Stainless Steel.
#33 SQUARE-TO-ROUND S (SQUARE) 1.5"

TRANSITION WITH 45˚ Kice can supply Series 31, 32, 33, 34, 35, and
COLLAR 36 transitions to match Kice Airlock flanges:
Y (Includes 1/4” thick flange, drilled to match Kice Airlock Flange)
T
For Round Kice Flange specify:
“to match Kice VJ Airlock, Ref. Pg. 47”
D For Square Kice Flange specify:
45˚ “to match Kice VJ Airlock, Ref. Pg. 47”
PART NO. D (OD) S T Y
33A3-4 3 4 2 4
For more information on
33A4-4 4 4 2 4
Kice Cyclone Collectors,
33A4-5 4 5 2 4
request Kice Data Sheet
33A4-6 4 6 2 4
CY-4.
33A4-8 4 8 2 4
33A5-5 5 5 2.5 4
“High efficiency, large
33A5-6 5 6 2.5 4
range of sizes and
33A5-8 5 8 2.5 4
variety of options.”
33A6-6 6 6 3 4
33A6-8 6 8 3 4
33A8-8 8 8 4 4

Series 34/35/36 Transitions

Round-to-Round transition fittings in Aluminum or Steel. All joints butt welded without laps. Standard
material thickness is 16 ga. with 1.5" wide x .134" (10 ga.) thick flange; not drilled. Additional sizes, flange
widths, and materials available upon request.
R (ROUND) 1.5"
#34 ROUND-TO-ROUND 1.5" R (ROUND) #35 ROUND-TO-ROUND
TRANSITION WITH TRANSITION WITH 30˚
STRAIGHT COLLAR COLLAR
L T
D 30˚
D
PART NO. D (OD) R T L PART NO. D (OD) S T Y

34A3-4 3 4 2 6 35A3-4 3 4 2 4
34A4-4 4 4 2 6 35A4-4 4 4 2 4
34A4-5 4 5 2 6 35A4-5 4 5 2 4
34A4-6 4 6 2 6 35A4-6 4 6 2 4
34A4-8 4 8 2 6 35A4-8 4 8 2 4
34A5-5 5 5 2.5 6.5 35A5-5 5 5 2.5 4
34A5-6 5 6 2.5 6.5 35A5-6 5 6 2.5 4
34A5-8 5 8 2.5 6.5 35A5-8 5 8 2.5 4
34A6-6 6 6 3 7 35A6-6 6 6 3 4
34A6-8 6 8 3 7 35A6-8 6 8 3 4
34A8-8 8 8 4 8 35A8-8 8 8 4 4
R (ROUND) 1.5"
#36 ROUND-TO-ROUND
TRANSITION WITH 45˚ Kice can supply Series 31, 32, 33, 34, 35, and
COLLAR 36 transitions to match Kice Airlock flanges:
Y
(Includes .25” thick flange, drilled to match Kice Airlock Flange)
T
For Round Kice Flange specify:

D
For Square Kice Flange specify:
45˚
PART NO. D (OD) S T Y
36A3-4 3 4 2 4
36A4-4 4 4 2 4
36A4-5 4 5 2 4
36A4-6 4 6 2 4
363A4-8 4 8 2 4
36A5-5 5 5 2.5 4
36A5-6 5 6 2.5 4
36A5-8 5 8 2.5 4
36A6-6 6 6 3 4
36A6-8 6 8 3 4
36A8-8 8 8 4 4

Series 41/42/43/44 Branch Fittings

Tube OD Branch fittings are Kice stock in Aluminum or Steel. Stainless Steel available on special order.
Fittings are mitered and butt welded without laps. Standard material thickness is 16 ga. Additional sizes,
designs, gauges, and angles upon request.
30˚
#41 SINGLE “Y” BRANCH #42 SINGLE “Y” BRANCH 45˚
WITH 30˚ LEG D WITH 45˚ LEG

D
E E
F
F
G G
D D
PART NO. D (OD) E F G PART NO. D (OD) E F G

41A3 3 12 7.5 3 42A3 3 12 6 3
41A4 4 16 10 4 42A4 4 14 8 4
41A5 5 20 12.5 5 42A5 5 17 10 5
41A6 6 24 15 6 42A6 6 21 12 6
41A8 8 30 21 7 42A8 8 30 16.25 8
#43 DOUBLE “Y” 30˚ 30˚ #44 DOUBLE “Y” 45˚ 45˚
BRANCH WITH 2 D D BRANCH WITH 2
EACH 30˚ LEGS EACH 45˚ LEGS D D
E E
F F
G
G
D
D
PART NO. D (OD) E F G PART NO. D (OD) E F G

43A3 3 12 7.5 3 44A3 3 12 6 3
43A4 4 16 10 4 44A4 4 14 8 4
43A5 5 20 12.5 5 44A5 5 17 10 5
43A6 6 24 15 6 44A6 6 21 12 6
43A8 8 30 21 7 44A8 8 30 16.25 8

Series 45/46/47 Branch Fittings

Tube OD Branch fittings are Kice stock in Aluminum or Steel. Stainless Steel available on special order.
Fittings are mitered and butt welded without laps. Standard material thickness is 16 ga. Additional sizes,
designs, gauges, and angles upon request.
30˚ 30˚
#45 SYMMETRICAL #46 SYMMETRICAL
D D
“Y” BRANCH WITH “Y” BRANCH WITH 45˚ 45˚
EACH LEG 30° EACH LEG 45°

D D
FROM CENTER FROM CENTER
F
F
G G
D D
PART NO. D (OD) F G PART NO. D (OD) F G

45A3 3 5 3 46A3 3 4.5 3
45A4 4 6 4 46A4 4 6 4
45A5 5 7.5 5 46A5 5 7.5 5
45A6 6 9 6 46A6 6 9 6
45A8 8 10 4.375 46A8 8 9 6
D G
#47 SINGLE “T” Kice manufactures many special fittings for
BRANCH WITH customers and welcomes your inquiries.
90° LEG G
Other fittings we manufacture, but are
F
not shown, include crosses, TY's, welded
manifolds, and special angles, lengths,
E D
materials, and wall thicknesses. Contact
Kice Industries for pricing information.
G
For detailed information

F on Kice Diverter, Bin Fill,
and Slide Gate Valves,
PART NO. D (OD) E F G request Kice Data
Sheet DV-1.
47A3 3 12 6 4.5
47A4 4 12 6 4
47A5 5 12 6 3.5 “Heavy Duty design with
47A6 6 12 6 3 proven performance.”
47A8 8 16 8 4
“A” in part number specifies Aluminum material. Specify “B” for Steel and
“S” for 304L Stainless Steel.

Series 51/52/53 Gravity Diverter Valves

Gravity diverter valves available in Aluminum, Steel or Stainless Steel. Additional sizes, designs, gauges,
and angles available upon request. Also available with actuation.
Gravity Diverter Valve with streamlined design. Long

taper transitions assure good flow and sanitation. D
#51 SYMMETRICAL
No ledges or laps. Butt weld fabrication. Available in GRAVITY DIVERTER T
Aluminum, Steel or Stainless Steel. VALVE WITH EACH
LEG 15˚ FROM CENTER
Self centering valve blade is metal laminated with
white felt. Quadrant shows blade position and locks in F
place. Rectangular body section assures good stream
splitting action.
Options for Series 51/52/53/54 Gravity Diverter Valves:

• Tongue Seal Material
- White Food Grade Neoprene Tongue Seal D D
30˚
- Metal Tongue; no seal
• Automation
PART NO. D (OD) F T
- Rotary Air or Electric Actuation
• Chain and/or Rope Operation Handles 51A3 3 10.5 2
• Additional Sizes 51A4 4 13 2
51A5 5 16.25 2.5
51A6 6 19.5 3
See next page for series 54 Dual Gravity 51A8 8 23 4
Diverter Valve and automated drawing. “A” in part number specifies Aluminum material. Specify “B”
for Steel and “S” for Stainless Steel.
D D
#52 GRAVITY T #53 GRAVITY T

DIVERTER VALVE DIVERTER VALVE
WITH 30˚ LEG TO WITH 30˚ LEG
LEFT OF CENTER TO RIGHT OF
F CENTER
F
E
E
D
D
30˚ D
D 30˚
PART NO. D (OD) E F T PART NO. D (OD) E F G

52A3 3 12 10 2 53A3 3 12 10 2
52A4 4 16 13 2 53A4 4 16 13 2
52A5 5 20 16.5 2.5 53A5 5 20 16.5 2.5
52A6 6 24 19.5 3 53A6 6 24 19.5 3
52A8 8 32 25.75 4 53A8 8 32 25.75 4
for Steel and “S” for Stainless Steel. for Steel and “S” for Stainless Steel.

Series 54 Dual Gravity Diverter Valves

Gravity Diverter valves available in stock in Aluminum or Steel. Stainless Steel available on special order.
Additional sizes, designs, gauges, and angles available upon request. Also available with actuation.
Gravity Diverter Valve with streamlined design. Long D

taper transitions assure good flow and sanitation. #54 SYMMETRICAL DUAL T
No ledges or laps. Butt weld fabrication. Available GRAVITY DIVERTER
from Kice stock in Aluminum or Steel. Stainless Steel VALVE WITH EACH LEG
and other materials available on special order. 20° FROM CENTER
F
Self centering valve blade is metal laminated with
white felt. Quadrant shows blade position and locks in
E
place. Rectangular body section assures good stream
splitting action.
Options for Series 51/52/53/54 Diverter Valves:

• Tongue Seal Material D D
20˚ D 20˚
- White Food Grade Neoprene Tongue Seal
- Metal Tongue; no seal
PART NO. D (OD) E F T
• Automation
- Air Cylinder, Rotary Air or Electric Actuation 54A3 3 16 14 2
• Chain and/or Rope Operation Handles 54A4 4 20 17 2
• Additional Sizes 54A5 5 25 21.5 2.5
54A6 6 30 26 3
54A8 8 39.5 33.5 4
See previous page for Series 51/52/53
Manual Gravity Diverter Valves for Steel and “S” for Stainless Steel.
KICE GRAVITY DIVERTER VALVES WITH VARIOUS ACTUATION PACKAGES
F F
Kice Series 51/52/53 Single and Series 54 Dual Gravity Diverter Valves
(OD) F G H
with Air Actuation package, include as standard, rotary air actuator,
position switch and dual coil solenoid valve. Available in Nema 4/4X 3 13.875 12 16
and Nema 7/9. Includes heavier shaft and bearing seals. Series 54 has 4 14.375 16 20
separate controls for each tongue. See Speed Spout Technical Manual - 5 14.875 20 25
Page 23 for automation specifications. Contact Kice Technical 6 15.375 24 30
Sales with your applications and specifications. 8 16.375 32 39.5

Series 55A Spout Diverter Valve

Kice 55A gravity diverter valves are manufactured from cast Aluminum only.
Available in manual operation and pneumatic actuation.
#55A SPOUT DIVERTER VALVE

E A
D
ISO View
60˚
The Kice 55A Diverter Valve is a two-way gravity valve

PART NO. D (OD) A B E F
for diverting material flow. The unit is Cast Aluminum
with a machined body and rotor to assure positive 55A4 4 3.125 9.5 9.5 8.5
positioning. The Aluminum rotor has a hard anodized 55A5 5 3.75 11.75 11.75 10.5
surface to add wear resistance and long life. Normal 55A6 6 4.375 13.75 13.625 12.25
operation to 150°F. The valve is available in 4", 5" and Equipped with Self centering spring loaded detent and positive stops.
6"0D. Available with manual controls and air actuation. Manual Control adaptable to pull chain operation.
#55A SPOUT DIVERTER VALVE WITH

ROTARY AIR ACTUATION (CURRENT STYLE)
D Type A C See Kice Speed Spout Technical Manual - Page 23

for automation specifications.
Specify Nema 4/4X or Nema 7/9 controls when ordering.
B F
60˚
PART NO. D (OD) A B C E F

55A4 W/CONTROLS 4 3.125 9.5 9.875 9.5 8.5
55A5 W/CONTROLS 5 3.75 11.75 10.5 11.75 10.5
55A6 W/CONTROLS 6 4.375 13.75 11.5 13.625 12.25

Series 56 Bucket Valve

Kice 56 carbon steel bucket valves divert flow between two (2) 60° legs. Square inlet and outlet is
standard with transitions available to round. Also available in Stainless Steel. Available in manual
operation, pneumatic actuation and electric operation.
A D (Square)
ISO view shown with manual control 60˚

C
Kice 56 Bucket Valve is a heavy-duty

PART NO. D (SIZE) A B C E (HEIGHT)
diverter valve constructed of carbon
steel with an Abrasion-Resistant (AR) 56B6 6x6 1.5 9.250 8.625 11.500
Steel diverting plate. Available in 6" 56B8 8x8 1.5 11.000 10.375 13.750
to 24" square inlet and outlet with 56B10 10x10 1.5 12.750 12.125 16.125
manual control, rotary air actuator or 56B12 12x12 1.5 16.500 16.125 20.340
electric actuation. Undrilled flanges are 56B14 14x14 1.5 18.250 17.875 22.500
standard. Inlet and Outlet transitions 56B16 16x16 1.5 20.125 19.500 24.875
from square flange to round tubing are 56B18 18x18 1.5 21.875 21.250 27.125
available (see below). 56B20 20x20 1.5 23.500 22.875 29.250
56B22 22x22 1.5 25.250 24.500 31.500
56B24 24x24 1.5 27.125 26.340 34.250
“B” in part number specifies Steel material. Specify “A” for Aluminum and “S” for 304L Stainless Steel.
#56 BUCKET VALVE STEEL TRANSITIONS #56 BUCKET VALVE SHOWN WITH ROTARY AIR
ACTUATION PACKAGE
#56 BUCKET VALVE SHOWN WITH ELECTRIC

D (Round) D (Square) A H T AUTOMATION PACKAGE
6 6x6 1.5 7 3
7 7x7 1.5 7 3
8 8x8 1.5 8 3
9 9x9 1.5 8.5 3
10 10x10 1.5 10 4
12 12x12 1.5 11 4
14 14x14 1.5 12 4
16 16x16 1.5 13 4
See Kice Speed Spout Technical Manual - Page 23
for automation specifications.

Series 57GM Slide Gate Valves

Kice 57GM Manual Slide Gate Valves are used in gravity and dust control applications to throttle
or for "on-off' control of air flow. Carbon Steel is standard; Aluminum and Stainless Steel also
available.
#57GM SLIDE GATE VALVE Kice 57GM round, Slide Gate valves are designed and used for
throttling or shut-off of gravity and/or dust control applications. Standard
is painted, carbon steel with round knurled plastic knob for micro
adjustment of blade. Also available in aluminum or stainless steel.
Ideal for dust control applications where an absolute airtight seal is not
required. 45° angle 57GM available on special order.
PART
D (OD) A B C E F
NO.
57GM2 2 2.5 6.5 3.5 3 6.25
57GM2.5 2.5 1.875 5.25 4 3 6.25
D
Inlet
57GM3 3 2.25 5.5 4.5 3 6.25
57GM3.5 3.5 2.5 6.25 5 3 6.25
57GM4 4 2.75 7 5.5 3 6.25
57GM4.5 4.5 3 7.75 6 3 6.25
57GM5 5 3.25 8.5 6.5 3 6.25
E
F 57GM6 6 3.75 10.5 7.5 3 6.25
57GM7 7 4.25 12.5 8.5 3 6.25
57GM8 8 4.75 14 9.5 3 6.25

Series 58GM Slide Gate Valves

58GM Manual Slide Gate Valves are designed to shut off material from a hopper or silo when
maintenance of downstream equipment is required. In the open position, it positively seals
conveying air and material to atmosphere. The hand crank gearing is designed to close through
material in case of an upset condition.
QTY. (D) SIZE (DIA. E) HOLES
TYP. (2) FLANGES
#58GM SLIDE GATE VALVE
F A SQ.
B
F
G
OPEN
4.75
C
NOM.
PART
A B C D E F G** H
NO.
58GM4 4 8.5 15 - - BLANK FLANGE 4
58GM5 5 9.5 17 - - BLANK FLANGE 4
58GM6 5 9.5 17 12 .4375 2.125 3.125 4
58GM7 7 11.5 21 - - BLANK FLANGE 4
58GM8 7 11.5 21 12 .4375 3.25 - 4
58GM9 9 13.5 25 - - BLANK FLANGE 6
58GM10 9 13.5 25 12 .4375 BLANK FLANGE 6
58GM11 11 15.5 29 - - BLANK FLANGE 6
58GM12 11 15.5 29 12 .4375 4.5 - 6
58GM13 13 17.5 33 - - BLANK FLANGE 6
58GM14 13 17.5 33 12 .4375 5.25 - 6
**Dashes in these columns indicate that bolt hole spacing is the "G" dimension for the entire pattern.

Series 58GA Slide Gate Valves

58GA Automated Slide Gate Valves are the best choice for handling dry material in gravity flow
applications. It has live-loaded seals that extend service life by compensating for wear. These
seals provide an excellent material seal across the gate and to atmosphere, and can be replaced
while the valve is in service.
QTY. (E) SIZE (DIA. F) HOLES
TYP. (2) FLANGES
#58GA SLIDE GATE VALVE
A SQ.
B G
C D NOMINAL
PART
A B C D E F G H**
NO.
58GA4 4 8 16.625 8.875 - - BLANK FLANGE
58GA5 5 9 15 9.875 - - BLANK FLANGE
58GA6 5 9 15 9.875 12 .4375 2.125 3.125
58GA7 7 11 19 11.875 - - BLANK FLANGE
58GA8 7 11 19 11.875 12 .4375 3.25 -
58GA9 9 13 23 13.875 - - BLANK FLANGE
58GA10 9 13 23 13.875 12 .4375 3.875 -
58GA11 11 15 27 15.875 - - BLANK FLANGE
58GA12 11 15 27 15.875 12 .4375 4.5 -
58GA13 13 17 31 17.875 - - BLANK FLANGE
58GA14 13 17 31 17.875 12 .4375 5.25 -
58GA15 14 18 33 18.875 12 .4375 5.5 -
**Dashes in these columns indicate that bolt hole spacing is the "G" dimension for the entire pattern.

Kice Automation Control Package Specifications

and Options
STANDARD ROTARY ACTUATOR WITH STANDARD AIR CYLINDER ACTUATION WITH

NEMA 4/4X CONTROLS: NEMA 4/4X CONTROLS:
• Double Acting Rotary Air Actuator (based on • Double Acting Air Cylinder (based on 80-120
80-120 PSIG clean, dry, plant air supply). PSIG clean, dry, plant air supply), covered with
expanded metal guard.
• Dual Coil Nema 4/4X Solenoid Valve, NAMUR
mount, with 120VAC coils and DIN connectors • Dual Coil Nema 4/4X Solenoid Valve, with
each end, flow control exhaust mufflers, 120VAC coils and DIN connectors each end, flow
bracketing and mounting. control exhaust mufflers, bracketing and mounting.
• Position Switch with 2 each mechanical limit • Position Switch with 2 each mechanical limit
switches, Nema 4/4X, internal terminal strip, switches, Nema 4/4X, internal terminal strip,
120VAC, .5" NPT conduit connection, bracketing 120VAC, .5" NPT conduit connection, bracketing
and mounting. and mounting.
STANDARD ROTARY ACTUATOR WITH STANDARD AIR CYLINDER ACTUATION WITH

NEMA 7/9 CONTROLS: NEMA 7/9 CONTROLS:
• Double Acting Rotary Air Actuator (based on • Double Acting Air Cylinder (based on 80-120
80-120 PSIG clean, dry, plant air supply). PSIG clean, dry, plant air supply), covered with
expanded metal guard.
• Dual Coil Nema 4/4X Solenoid Valve, NAMUR
mount, with 120VAC coils and DIN connectors • Dual Coil Nema 4/4X/7/9 Solenoid Valve, with
each end, flow control exhaust mufflers, 120VAC coils and DIN connectors each end, flow
bracketing and mounting. control exhaust mufflers, bracketing and mounting.
• Position Switch with 2 each mechanical limit • Position Switch with 2 each mechanical limit
switches, Nema 4/4X/7/9, internal terminal strip, switches, Nema 4/4X/7/9, internal terminal strip,
120VAC, .5'' NPT conduit connection, bracketing 120VAC, .5" NPT conduit connection, bracketing
and mounting. and mounting.
STANDARD ELECTRIC ACTUATION WITH KICE AUTOMATION OPTIONS:

NEMA 4/4X CONTROLS:
Single Coil solenoid valves, other voltages & designs,
• 120vAC Electric Actuator, Nema 4/4X, with switch configurations, or other branded OEM
internal heater and thermostat, torque-limiting equipment available upon request and specification.
system, 2 each extra limit switches, manual Contact Kice Technical Sales for more information
override, .75" NPT conduit connection, or your specifications.
bracketing and mounting.

Series 67Q 2-Way Diverter Valves

Kice Series 67Q 2-Way Heavy Duty Diverter Valves are designed for pressure applications to divert
flow from one conveying line to another with close tolerances to ensure a tight seal and prevent
product stream cross contamination.
#67Q 2-WAY DIVERTER VALVE C
Kice Series 67Q 2-Way Diverter

Valves are designed for High 30˚
Pressure pneumatic conveying B
applications. Straight thru
design with 30° divert leg with
close tolerances for tight seal
and to prevent product cross
contamination. Constructed
with cast iron bodies, rotors,
D Typ
and endplates, the Kice 67Q A
F
G
diverter valve is built for long E
lasting service.
Cast Iron transitions are included PART NO. D (OD) A B C E F G BARE WT

and are available in Tube OD and
IPS sizes. Fabricated transitions 67Q2-2 2 8 6.875 6 16 6.625 13.25 70
also available. A variety of control 67Q2.5-2 2.5 8 6.875 6 16 6.625 13.25 70
options are available, including
bare, manual, electric, rotary air 67Q3-2 3 8 6.875 6 16 6.625 13.25 75
actuator and air cylinder operation.
67Q4-2 4 10 9.25 8 21.5 7.5 15 125
“Converging Valve” configuration 67Q5-2 5 13 11.5 9.875 26.5 7.75 15.5 200
(multiple inlets to one common
outlet) available when specified. 67Q6-2 6 16 13.875 12.125 32.5 8.5 17 260
Chrome and nickel standard. 67Q8-2 8 21 15.5 17.375 40.25 9.875 19.75 370
67Q10-2 10 25 18.5 20.375 50.625 11.875 23.75 515
Transitions to Tube OD supplied as standard.

All Kice 67Q 2-way and Half Sizes and Pipe Size Transitions supplied
3-way Diverter Valves when specified. Standard mounting of
come standard with controls as shown below. Other side optional
Chrome Plated Interior and must be specified.
body surfaces and Nickel
Position Switch direct mounted to shaft
Plated Rotor. The valves opposite side as option. Stainless Steel F
are suitable for indoor Diverter Valves available on special order.
and/or outdoor service. Contact Technical Sales. 67Q shown with manual control
The treatment prevents
rust, corrosion, galling and See Kice Speed Spout Technical Manual - Page 23 for automation specifications.
“sticking” due to moisture.

Series 67Q 3-Way Diverter Valves

Kice Series 67Q 3-way Heavy Duty Diverter Valves are designed for pressure applications to divert flow
from one conveying line to any of three outlets with close tolerances to ensure a tight seal and prevent
product stream cross contamination.
30˚
#67Q 3-WAY DIVERTER VALVE
Kice Series 67Q 3-Way Diverter B

Valves are designed for High
Pressure pneumatic conveying
applications. Straight thru design
with 2 each 30° divert leg with
close tolerances for tight seal B
and to prevent product cross
contamination. Constructed
with cast iron bodies, rotors,
and endplates, the Kice 67Q 30˚
D Typ
diverter valve is built for long A C
F
lasting service. E G
Cast Iron transitions are included PART NO. D (OD) A B C E F G BARE WT

and are available in Tube OD and
IPS sizes. Fabricated transitions 67Q2-3 2 11.250 7.625 9.250 22.500 7.000 14.000 105
also available. A variety of control 67Q2.5-3 2.5 11.250 7.625 9.250 22.500 7.000 14.000 105
options are available, including
bare, manual, electric and air 67Q3-3 3 11.250 7.625 9.250 22.500 7.000 14.000 105
cylinder operation.
67Q4-3 4 12.250 8.125 10.000 24.500 8.125 16.125 130
“Converging Valve” configuration 67Q5-3 5 14.250 9.625 11.500 28.500 8.875 17.875 205
(multiple inlets to one common
outlet) available when specified. 67Q6-3 6 17.125 11.375 13.500 34.250 9.875 19.875 325
Chrome and nickel standard. 67Q8-3 8 22.375 14.375 17.375 44.750 11.875 23.875 590
67Q10-2 10 25.000 18.500 20.375 50.625 11.875 23.750 515
Transitions to Tube OD supplied as standard.

All Kice 67Q 2-way and Half Sizes and Pipe Size Transitions supplied
3-way Diverter Valves when specified. Standard mounting of
come standard with controls as shown below. Other side optional
Chrome and must be specified.
Plated Interior body
Position Switch direct mounted to shaft
surfaces and Nickel Plated opposite side as option. Stainless Steel
Rotor. The valves are Diverter Valves available on special order.
suitable for indoor and/or Contact Technical Sales. F
outdoor service. The 67Q 3-way with manual control
treatment prevents rust,
See Kice Speed Spout Technical Manual - Page 23 for automation specifications.
corrosion, galling and
“sticking” due to moisture.

Series 68Q Bin Fill Valves

Kice 68Q Bin Fill Valves are typically installed in pneumatic loop conveying systems, discharging to
multiple hoppers, scales or bins. Simultaneously, a second channel in the valve vents the conveying air
from the bin back to the point of origin.
#68Q BIN FILL VALVE
Kice Series 68Q Bin Fill Valve are designed C
B
for conveying into bins while being able to T E
F
vent conveying air at the same time. Straight D
thru design with 90° divert position with close

tolerances for tight seal and to prevent product
cross contamination. Low height requirements
FLOW A
and straight through tube connections simplify
installation. Constructed with cast iron bodies,
rotors, and endplates, the Kice 68Q Bin Fill Valve
is built for long lasting service. .1875"
O 60˚
Valves include cast transitions to Tube OD. BAFFLE PLATE
The sectional drawings to the right illustrate DIVERTED EXHAUST

POSITION FROM BIN
the basic simplicity of our unique design and how it
eliminates bin vent bags, cyclones, and vent piping
otherwise required. A variety of control options are
available, including bare, manual, electric, rotary air N
G .375"
actuator and air cylinder operation. POSITION #1
THRU
Kice 68Q Bin Fill Valves may be installed in MH J
POSITION
series to control the flow of stock to a number of
destinations. A bin level or weight-sensing device
POSITION #2
may be provided to switch the valve actuator when K
L
the scale hopper or bin is filled.
A 10 ga. carbon steel baffle plate to control fine All Kice 68Q Bin Fill Valves
product “carry-over” is supplied as standard. come standard with
Correct orientation or Baffle Plate shown at right or Chrome Plated Interior
see Kice Dwg#1-3439A for details. body surfaces and Nickel
Plated Rotor. The valves
Transitions to Tube OD supplied as standard. 8" are suitable for indoor
supplied with Bolt-On Transitions. and/or outdoor service.
The treatment prevents
Position Switch direct mounted to shaft opposite
side as option. 68Q8 and all Stainless Steel Diverter rust, corrosion, galling and
Valves are fabricated and available on special order. “sticking” due to moisture.
Contact Technical Sales.
PART NO. D (OD) A B C E F G H I J K L M N O T BARE WT

68Q2 2 9 12 24 13.75 6.875 6.5625 5 3.4375 6.875 4.25 8.5 8 9.0625 9 3 110
68Q2.5 2.5 9 12 24 13.75 6.875 6.5625 5 3.4375 6.875 4.25 8.5 8 9.0625 9 3 110
68Q3 3 9 12 24 13.75 6.875 6.5625 5 3.4375 6.875 4.25 8.5 8 9.0625 9 3 115
68Q4 4 9 12 24 13.75 6.875 6.5625 5 3.4375 6.875 4.25 8.5 8 9.0625 9 3 115
68Q5 5 10.75 13 26 14.25 7.125 9.125 6 4 8 5.5 11 9 12.125 10 3 150
68Q6 6 12.5 14 28 15.5 7.5 10.125 7 4.5 9 6.125 12.25 10 13.125 11 3 225
68Q8 8 13.625 22 44 20.125 10.0625 12 9.625 5.8675 11.375 6.625 13.25 12.5 14.875 12 --- 325

Series 71/72/73 Sight Glasses

Series 70 Kice Sight Glasses are available in flanged and Tube OD. Available from stock in Aluminum or Steel.
Stainless Steel available on special order. Additional sizes, designs, and gauges available upon request.
B B
A A
#71-2 ROUND-TO- #71-3 ROUND-TO-

ROUND FLANGED SQUARE FLANGED
SIGHT GLASS SIGHT GLASS
L L
C
PART NO. SIZE A (ID) B (OD) L PART NO. SIZE A (ID) B (OD) L C
71A6-2 6 5.5 9 6 71A6-3 6 5.5 9 6 9
71A8-2 8 7.5 11 6 71A8-3 8 7.5 11 6 11
71A10-2 10 9.5 13 6 71A10-3 10 9.5 13 6 13.25
71A12-2 12 11.5 15 6 71A12-3 12 11.5 15 6 15.25
71A14-2 14 13.5 17.25 6 71A14-3 14 13.5 17.25 6 17.25
71A15-2 15 14.5 18.25 6 71A15-3 15 14.5 18.25 6 18.25
“-2” specifies Round-to-Round Sight Glass and “-3” specifies Round-to Square Sight Glass. Sight Glass flange patterns shown on Speed Spout Technical
Manual - Page 47. “A” in part number specifies Aluminum material. Specify “B” for Steel and “S” for 304L Stainless Steel. Series 71 Sight Glass assemblies
rated to 15 PSIG and 15 in. Hg. 2" thru 6"0D size uses Polycarbonate tubing and is rated to 240°F; 8" and larger use Acrylic tubing and are rated to 150°F. For
4" long Series 71 Sight Glass replacement tube, specify PN 73P(Size)-4. For replacement Neoprene Garter, specify “Garter for (Size) Sight Glass.” For
replacement Band Clamp, specify “Band/Clamp Assembly for (Size) Sight Glass”
#72 TUBE OD SIGHT GLASS #73 REPLACEMENT SIGHT GLASS TUBE

B
PART
D (OD) L T B D
NO.
72A2 2 18 9 5.5
WALLS L
72A2.5 2.5 18 9 6
2 EA .375" 72A3 3 18 9 6.5 We maintain a large stock
HOLES
72A3.5 3.5 18 9 7 PART
of clear plastic tubing D (OD) L T
in full lengths, or cut to NO.
72A4 4 18 9 7.5
72A4.5 4.5 18 9 8 your specifications. Sight 73P2-X 2 96" .125"
glass is priced per inch, 73P2.5-X 2.5 96" .125"
72A5 5 18 9 8.5 plus a standard cutting
6" T L 72A6 6 18 9 9.5 charge. When ordering,
73P3-X 3 96" .125"
72A7 7 18 9 10 indicate desired length 73P3.5-X 3.5 96" .125"
in inches in place of the 73P4-X 4 96" .125"
72A8 8 18 9 10.5 “X.” Replacement tubes
72A10 10 18 9 12.5 73P4.5-X 4.5 72" .125"
3" TYP for Kice Series 71 and 72
72A12 12 18 9 14.5 Sight Glass are indicated 73P5-X 5 96" .125"
72A14 14 18 9 16.5 below. OD sizes 2", 2.5", 73P6-X 6 96" .125"
3", 3.5", 4", 5" and 6" are 73P7-X 7 72" .1875"
72A15 15 18 9 17.5 Polycarbonate; Other sizes
are Acrylic. Other sizes
73P8-X 8 72" .1875"
"A" in part number specifies Aluminum material. Specify "B" for Steel and "S" 73P10-X 10 72" .1875"
and wall thicknesses are
for 304L Stainless Steel. Note: Aluminum not available in 7", 10" and larger.
available on special order. 73P12-X 12 72" .1875"
Replacement Components: Series 72 Sight Glass Tubing: PN 73P(Size)-9.
Neoprene Garter: "Garter for (Size) Sight Glass." Band Clamp: "Band/Clamp 73P14-X 14 72" .1875"
Assembly for (Size) Sight Glass." Series 72 Sight Glass assemblies rated to 15 73P15-X 15 72" .1875"
PSIG and 15 in. Hg. OD sizes 2" thru 6" rated to 240°F. OD sizes 8" and larger L = Full Length
rated to 150°F. Metal bar between tubes is static conductor. For Series 71 replacement tube, specify PN 73P(Size)-4
For Series 72 replacement tube, specify PN 73P(Size)-9

Series 74/75/76/77 Fittings

Tube OD fittings are available from stock in Aluminum or Steel. Stainless Steel available on special
order. Fittings are mitered and butt welded without laps. Additional sizes, designs, gauges, and angles
available upon request.
#74 ROUND INSPECTION PORT #75 HINGED INSPECTION PORT
A Widely recognized to be the milling worlds outstanding spout
inspection design!
79NL CAP
A
B D
L
A very practical and convenient inspection port that simply

couples in place in a spouting line. L
Fitting couples
PART NO. D (OD) A L B PART NO. D (OD) A L
easily in-line.
74A4-4 4 4 18 9 75A4 4 10 18
74A5-4 5 4 18 9 Liner provides 75A5 5 10 18
74A5-5 5 5 18 9 smooth dust- 75A6 6 10 18
74A6-4 6 4 18 9 tight seal. Latch 75A8 8 10 18
pulls lid down
74A6-5 6 5 18 9
to spout under
74A6-6 6 6 18 9 tension.
74A8-5 8 5 18 9
74A8-6 8 6 18 9
Each 74 supplied with 79NL Neoprene Cap. “A” in part Each 75 supplied with 76 Hinged Lid. “A” in part number
number specifies Aluminum material. Specify “B” for Steel specifies Aluminum material. Specify “B” for Steel and “S” for
and “S” for 304L Stainless Steel. Stainless Steel.
#76 HINGED LIDS #77 SIFTER KNEE

LID LINED WITH
A BEAD
WHITE FOAM Very practical design.
B Top section is beaded
A to hold sifter sock and
lower section is long
D
C
79NL
enough to extend
Cap through the floor.
L Also available with

E
For installation on hinged lid.
PART NO. D (OD) A
spouting while on the job.
Cut hole, fasten hinges 76A4-7 4 7 May be varied to fit
and catch assembly to your requirements.
76A4-10 4 10
spouting and latch to Call Kice with your
76A5-7 5 7 specifications.
spout. 76A5-10 5 10 D
76A6-7 6 7
Liner provides dust
tight sanitary seal. 76A6-10 6 10 PART NO. D (OD) A B C E L
Use 10" length when 76A8-7 8 7 77A4-4 4 4 2.5 8.75 5 23
space permits: 7" when 76A8-10 8 10 77A5-4 5 4 2.5 8.75 5 23
crowded. Specify length "A" in specifies Aluminum material. 77A5-5 5 5 2.5 8.75 5 23
when ordering. Specify "B" for Steel. Specify "S" for 77A6-4 6 4 2.5 8.75 5 23
304L Stainless Steel.
77A6-5 6 5 2.5 8.75 5 23
Each 76 hinged lid includes 2 each plated steel hinges and 1 each 77A6-6 6 6 2.5 8.75 5 23
"latch & catch" assembly and is lined with white foam.

Series 78/79N/79NL Fittings

Lids, Caps, and Plugs are available from stock in Aluminum, Steel and/or Molded Neoprene. Stainless Steel
available on special order. Additional sizes, designs, gauges, and angles available upon request.
#78 SADDLE LID #79NLV MOLDED

NEOPRENE VENT CAP
LID CLAMPS
PAST SPOUT B
L CENTERLINE
A D
D
Fits hole cut in spout on

job. Hard temper aluminum PART NO. D (OD) L PART NO. D A B
saddle lid clamps to spout 78A4 4 7 79NLV4 4 3 .875
by spring tension . Can slide 78A5 5 7 79NLV5 5 4 .875
open without removing. 78A6 6 7 79NLV6 6 5 .875
78A8 8 7 79NL Molded Neoprene Cap (detailed below), bored, with
Available in Aluminum only. insert of Chrome Plated perforated metal with .0625" diameter
Handle riveted to saddle lid
holes on .09375" staggered centers. 79As' remain available for
plug style and sizes other than 4", 5"and 6"OD.
#79N MOLDED NEOPRENE PLUG #79NL MOLDED NEOPRENE CAP

W L
B
D C B
D
A simple, low cost, plug designed to fit inside OD tubing, for A simple cap designed to fit over OD tubing, for round inspection ports
round inspection ports that meet requirements for sanitation and that meet requirements for sanitation and convenience. Solid molded
convenience. Solid molded neoprene rubber has no hollow sections neoprene rubber has no hollow sections and will not break or bend out
or crevices and will not break or bend out of shape. Reusable. of shape. Reusable. Kice logo molded on top.
Material: 70 Durometer Food Grade Neoprene Color: Gray Material: 70 Durometer Food Grade Neoprene, Color: Gray
PART NO. D W B C PART NO. D L B

79N4 4 .75 4.5 3.8125 79NL4 4 1.8125 .875
79N5 5 .75 5.5 4.8125 79NL5 5 1.8125 .875
79NL6 6 1.8125 .875

Series 81S/84A/86N Couplings And Clamps

Joining spouting has never been easier. Practical and reusable screw clamp, band, and sleeve design
makes installing Kice Speed Spout easy. Series 82M heavy duty compression couplings are detailed
on the following page.
#81S SCREW CLAMPS HOW TO JOIN SPOUTING WITH SCREW
CLAMP COUPLINGS
D
2 CLAMPS & BAND COUPLING; TYPE 2CB(Size)
2 CLAMPS, BAND & SLEEVE; TYPE 2CBS(Size)
3 CLAMPS, BAND & SLEEVE; TYPE 3CBS(Size)
4 CLAMPS, BAND & SLEEVE;
TYPE 4CBS(Size)
1/2"
Stainless Steel worm WITHOUT 86N WITH 86N Screw clamp couplings are less expensive and less
gear clamps provide complicated than other joining systems.
dependable clamping PART NO. (OD) PART NO. (OD)
power for Speed Spout 81S1.5-24 1.5 81S1.5-24 1.5 The 2CB coupling shown at the left end of the drawing
connections 81S2-32 2 81S2-32 2 above is very satisfactory for joining gravity flow spouting.
81S2.5-36 2.5 81S2.5-40 2.5 This consists merely of two (2) 81S screw camps and one
Permanent, but easy to 81S3-44 3 81S3-48 3 (1) 84A aluminum metal band. installation involves butting
release when necessary 81S3.5-52 3.5 81S3.5-56 3.5 the square ends of the two spout sections together,
using a nut driver, screw wrapping the band around the joint and screw the clamps
81S4-60 4 81S4-64 4
driver, or small wrench. tightly. This pulls the band snug - making the connection
81S4.5-68 4.5 81S4.5-72 4.5 straight, strong, and leak-proof.
Rust-proof! 81S5-76 5 81S5-80 5
Corrosion-proof! 81S5.5-84 5.5 81S5.5-88 5.5 All of these couplings work with butt joints. Besides
Shake-proof! 81S6-92 6 81S6-96 6 being simple and quick, they make a smooth self-aligning
81S7-108 7 81S7-112 7 connection, and are 100% reusable. The couplings can
81S8-124 8 81S8-128 8 also be used to fasten rubber hose to metal spouting.
#84A STANDARD BANDS #86N NEOPRENE SLEEVES
D D
PART NO. D (OD) A PART NO. D L
84A1.5 1.5 3 86N1.5 1.5 3
84A2 2 3 L
86N2 2 3
84A2.5 2.5 3 86N2.5 2.5 3
L
84A3 3 3 86N3 3 3
84A3.5 3.5 3.5 86N3.5 3.5 3.5
84A4 4 3.5 86N4 4 3.5
Sleeves used in
84A4.5 4.5 3.5 conjunction with Kice 84A 86N4.5 4.5 3.5
Bands are sheared and 84A5 5 4 Standard Bands are non- 86N5 5 4
ridge formed from a 84A5.5 5.5 4.5 toxic neoprene, material. 86N5.5 5.5 4.5
select type of Aluminum. 84A6 6 5 86N6 6 5
The width is well suited 84A7 7 6 The sleeving ID is .125" 86N7 7 6
for both gravity spouting 84A8 8 6 smaller than the tubing 86N8 8 6
and OD for a snug fit.
air systems. Stainless
Steel available on Also available in standard
special order. rolls of 10' or cut to length.
Bands are shipped flat.

Kice 82M Heavy Duty Tube OD Compression Couplings

Each Kice 82M Series Heavy duty Compression Coupling comes with a White Neoprene Food
Grade Gasket and SS grounding strip as standard. OD sizes are typical for Kice systems and equipment.
See next page for details regarding sizes, gaskets, and materials of construction.
Kice 82M Heavy Duty compression couplings designed for SIZE SHELL SLEEVE GASKET
permanent installation in the joining of either plain end, threaded,
grooved end, or a combination of any of these joints. The band .5'' - 2.875"OD .062
type construction holds the entire surface of the joint in uniform .052
3"OD
compression. Couplings are reusable. Coupling consists of .052 .093
galvanized shell, inner sleeve, white food grade gasket and 3.25" - 5"OD
stainless steel grounding strip. Standard white food grade 5.25" - 5.625"OD .062
gaskets have a max. operating temp. of 180 degrees F. High .125
9" - 24"OD .062
temperature gaskets available upon request.
LINE SIZE OD KICE PART NO. CARTON QUANTITY NO. OF BOLTS WEIGHT EACH COUPLING LENGTH BOLT SIZE
82M1.5-2 22 2 2.0 4"

1.5"OD TUBE 1.5" .5" X 1.75"
1.82M1.5-3 24 3 2.9 6"
82M2-2 30 2 2.1 4"
2"OD TUBE 2.0" .5" X 1.75"
82M2-3 18 3 3.1 6"
82M2.5-2 24 2 2.6 4"
2.5"OD TUBE 2.5" 82M2.5-3 20 3 3.4 6" .5" X 1.75"
82M2.5-4 18 4 4.6 8"
82M3-2 24 2 3.2 4"
3"OD TUBE 3.0" 82M3-3 18 3 4.5 6" .625" X 2"
82M3-4 13 4 5.9 8"
82M3.5-2 20 2 3.4 4"
3.5"OD TUBE 3.5" 82M3.5-3 10 3 5.1 6" .625" X 2"
82M3.5-4 10 4 6.6 8"
82M4-2 16 2 3.7 4"
4"ODTUBE 4.0" 82M4-3 12 3 5.3 6" .625" X 2"
82M4-4 8 4 7.2 8"
82M4.5-2 12 2 3.8 4"
4.5"OD TUBE 4.5" 82M4.5-3 8 3 5.5 6" .625" X 2"
82M4.5-4 6 4 7.7 8"
82M5-2 12 2 4.2 4"
5"OD TUBE 5.0" 82M5-3 8 3 6.2 6" .625" X 2"
82M5-4 6 4 8.1 8"
82M5.5-2 8 2 4.4 4"
5.5"OD TUBE 5.5" 82M5.5-3 8 3 6.8 6" .625" X 2"
82M5.5-4 8 4 9.0 8"
82M6-2 12 2 4.7 4"
82M6-3 10 3 7.0 6"
6"OD TUBE 6.0" .625" X 2"
82M6-4 7 4 9.4 8"
82M6-5 5 5 11.8 10"
82M7-3 6 3 7.9 6"
7"OD TUBE 7.0" 82M7-4 5 4 10.8 8" .625" X 2"
82M7-5 4 5 13.7 10"
82M8-2 4 2 11.0 6"
82M8-3 4 3 14.3 8"
8"OD TUBE 8.0" .75" X 3"
82M8-4 2 4 18.0 10"
82M8-5 2 5 22 12"
82M9-3 2 3 15.9 8
9"OD TUBE 9.0" .75 X 3"
82M9-4 2 4 19.9 10
82M10-3 2 3 17.5 8"
10"OD TUBE 10.0" 82M10-4 2 4 21.8 10" .75" X 3"
82M10-5 2 5 26.1 12"
82M12-3 1 3 20.4 8
12"OD TUBE 12.0" 82M12-4 1 4 25.5 10 .75" X 3"
82M12-5 1 5 30.2 12
Kice has complete couplings available in sizes from 2" IPS to 24" OD. Contact Kice for pricing. Kice Couplings are supplied with a white, food grade,
neoprene gasket as standard. Other gaskets (i.e. black neoprene, red rubber, silicone, or high-temperature) are available on special order. All replacement
gaskets are supplied with a SS grounding strip. Zinc plated steel couplings are standard. Aluminum & SS Couplings available on special order.

Kice 82M Heavy Duty Pipe Size Compression Couplings

Each Kice 82M Series Heavy duty Compression Coupling comes with a White Neoprene Food Grade Gasket
and SS grounding strip as standard. Pipe sizes are special Kice systems and equipment, but available.
Kice 82M Heavy Duty compression couplings
SIZE SHELL SLEEVE GASKET
designed for permanent installation in the joining
of either plain end, threaded, grooved end, or a .5'' - 2.875"OD .062
.052
combination of any of these joints. The band type 3"OD
construction holds the entire surface of the joint .052 .093
3.25" - 5"OD
in uniform compression. Couplings are reusable.
5.25" - 5.625"OD .062
Coupling consists of galvanized shell, inner sleeve, .125
white food grade gasket and stainless steel 9" - 24"OD .062
grounding strip.
LINE SIZE OD KICE PART NO. CARTON QUANTITY NO. OF BOLTS WEIGHT EACH COUPLING LENGTH BOLT SIZE
82M2 .375-2 26 2 2.2 4"

2" IPS 2.375" 82M2 .375-3 18 3 3.5 6" .5" X 1.75"
82M2 .375-4 12 4 4.7 8"
82M2 .875-2 20 2 2.4 4"
2.5" IPS 2.875" 82M2 .875-3 11 3 3.7 6" .5" X 1.75"
82M2 .875-4 10 4 5.0 8"
82M3.5-2 16 2 3.4 4"
3" IPS 3.500" 82M3.5-3 12 3 5.1 6" .625" X 2"
82M3.5-4 8 4 6.6 8"
82M4-2 14 2 3.7 4"
3.5" IPS 4.000" 82M4-3 10 3 5.3 6" .625" X 2"
82M4-4 7 4 7.2 8"
82M4.5-2 12 2 3.8 4"
4" IPS 4.500" 82M4.5-3 8 3 5.5 6" .625" X 2"
82M4.5-4 6 4 7.7 8"
82M5-2 12 2 4.2 4"
4.5" IPS 5.000" 82M5-3 8 3 6.2 6" .625" X 2"
82M5-4 6 4 8.1 8"
82M5 .5625-2 9 2 4.6 4"
5" IPS 5.563" 82M5 .5625-3 10 3 6.8 6" .625" X 2"
82M5 .5625-4 5 4 8.8 8"
82M6 .625-2 8 2 5.3 4"
82M6 .625-3 5 3 7.8 6"
6" IPS 6.625" .625" X 2"
82M6 .625-4 4 4 10.4 8"
82M6 .625-5 4 5 14.3 10"
82M8 .625-2 4 2 11.5 6"
82M8 .625-3 4 3 14.6 8"
8" IPS 8.625" .75" X 3"
82M8 .625-4 2 4 18.8 10"
82M8 .625-5 2 5 23.0 12"
82M10.75-3 1 3 16.4 8"
10" IPS 10.750" 82M103.75-4 2 4 20.3 10" .75" X 3"
82M10.75-5 2 5 25.2 12"
82M12.75-3 1 3 18.7 8
12" IPS 12.750" 82M12.75-4 1 4 23.3 10 .75" X 3"
82M12.75-5 1 5 28.1 12
Standard white food grade neoprene
gaskets have a maximum operating
temperature of 180 degrees F. High temp.
gaskets available upon request.
Kice has complete couplings available in sizes from 2" IPS to 24" OD. Contact Kice for pricing. Kice Couplings are supplied with a white, food grade,
neoprene gasket as standard. Other gaskets (i.e. black neoprene, red rubber, silicone, or high-temperature) are available on special order. All replacement
gaskets are supplied with a SS grounding strip. Zinc plated steel couplings are standard. Aluminum & SS Couplings available on special order.

Series 87A/88A/89 Flanges And Support Rings

Flanges and Support Rings to fit Tube OD fittings are available from stock in Aluminum. Floor flanges
and Support Rings are cast aluminum.
#87 A FLOOR FLANGE #88A SUPPORT RING
D
TAPPED .375-16UNC
F D
.3125"
1"
Two piece cast aluminum Designed to meet your needs

alloy - clamps to tube and PART NO. D F for a more attractive and PART NO. D W
trims around hole through 87A2 2 3.25 sanitary tube support. 88A2 2 1
floor. Should be set in caulk 87A2.5 2.5 3.25 88A2.5 2.5 1
and fill each screw recess 87A3 3 4.25 Polished aluminum alloy 88A3 3 1
with caulking. casting in two (2) identical
87A3.5 3.5 4.75 88A3.5 3.5 1
halves except one half
87A4 4 5.25 tapped for clamp bolts and 88A4 4 1
87A4.5 4.5 5.75 3/8"-16 tap for support rod. 88A4.5 4.5 1
87A5 5 6.25 88A5 5 1
87A5.5 5.5 6.75 Supports tube vertically, 88A5.5 5.5 1
87A6 6 7.25 horizontally, or at any angle 88A6 6 1
- very versatile.
#89 MATING FLANGE

"Locks", "Star Valves", "RV"'s, "Feeders"--
Whatever you call them... Call the industry leader!
Flanges to mate
to standard Request Kice Data Sheet RA-1 for detailed
Kice Airlocks. information on Kice
Can be used as
a convenient
floating flange for
hoppers, cyclones,
transitions, etc ...
PART NO. A(ID) B(OD) C THK HOLES D

89A6 6 9.25 8 .1875" 8 .4375"
89A8 8 11.25 10 .1875" 8 .4375"
89A10 10 13.25 12 .1875" 8 .4375"
89A12 12 15.375 14 .1875" 8 .4375"
89A14 14 17.375 16 .75" 8 .4375"
89A15 15 18.375 16.75 .75" 12 .4375"
“A” in part number specifies Aluminum material. Specify “B” for Steel
and “S” for 304L Stainless Steel.

Kice Angle Ring Flanges

Kice offers fabricated, close tolerance, angle ring flanges for use with our Kice Speed Spout and Dust
Duct components. "Leg Out" is standard and shown below, but many other styles are available.
Kice Fabricated Angle Ring Flanges can be attached to all standard

Kice Speed Spout components and are easily welded on in the
field. 3", 4" and 5" flanges are pressed; Larger flanges are rolled
angle iron, "leg out" style. Angle specifications and thickness shown
under "Specifications" column. Standard material is mild steel;
Aluminum and Stainless Steel are also available. Mild Steel flanges
are usually shipped within 48 hours of ordering. Special order
sizes, bolt hole dimensions, punching, and patterns available. Oval
flanges available on special order. Aluminum and Stainless Steel
material, specials and Oval flanges are usually shipped within 7-1
0 working days. Kice offers a full line of angle ring flanges through
72"ID. Call or consult Dust Duct catalog for larger sizes.
INSIDE OUTSIDE
ORDER ANGLE WEIGHT BOLT NO. OF BOLT HOLE
MATERIAL DIAMETER DIAMETER
SIZE SPECIFICATIONS (IN LBS) CIRCLE (C) BOLT HOLES DIAMETER
(A) (B)
3" Mild Steel 10 ga., 1" X 1", PRESSED .70 3.125 5.125 4.375 6 .28125
4" Mild Steel 10 ga., 1" X 1", PRESSED .85 4.125 6.125 5.375 6 .28125
5" Mild Steel 10 ga., 1" X 1", PRESSED 1.20 5.125 7.125 6.375 6 .28125
6" Mild Steel 1.25" X 1.25" X .125" 1.75 6.125 8.625 7.500 6 .375
8" Mild Steel 1.25" X 1.25" X .125" 2.25 8.125 8.625 9.500 8 .375
10" Mild Steel 1.25" X 1.25" X .125" 2.75 10.125 10.625 11.500 8 .375
11" Mild Steel 1.25" X 1.25" X .125" 3.00 11.125 11.625 12.500 8 .375
12" Mild Steel 1.5" X 1.5" X .125" 4.00 12.250 15.250 13.875 12 ZZZ
Rotary Stream Splitters mixes and

spreads coarse and fine products into
a homogeneous mixture, splits it into
smaller streams and discharges it into
gravity spouts for further processing.
Request Kice Data Sheet RSS-1 for
detailed information.
Gravity Stream Splitters spreads

coarse and fine ground products, splits
it into smaller streams and discharges
it into gravity spouts for further
processing. Request Kice Data Sheet
GSS-1 for detailed information.

Series 91/93 Miscellaneous Fittings

Additional components to complete your project are available from Kice in Aluminum or Steel. Stainless
Steel available on special order. Fittings are mitered and butt welded without laps. Additional sizes,
designs, gauges, and angles available upon request.
#91 SPOUT DEAD FALL BOX #93 SPOUT AIR INLET
B
A
L
Vent fitting relieves excessive vacuum or pressure in

gravity spouts. Open area around inlet spout covered
by perforated metal. For installation in vertical and
sharp pitch spouting.
Product speed slows when going through the Kice

#91 Dead Fall Box. Self cleaning stock funnel made PART NO. D (OD) L B
from 12 ga. carbon steel. Easy access through hinged
93A4 4 7 9
dust-tight door. For installation in vertical or steep
93A5 5 7 10
pitch spouting.
93A6 6 8 11
“A” 1n part number specifies Aluminum. Specify “B”
PART NO. D (OD) L T A B for Steel. Specify “S” for Stainless Steel.
91B4 4 14.000 2.000 5.000 1.500
91B5 5 15.000 2.500 5.500 1.750
91B6 6 16.000 3.000 5.500 1.750
Steel Only; Replacement Funnel, Hinge & Latch/catch available

Series 94 Gravity Flow Magnet Sections

Series 94 Gravity Flow Magnet Sections with manual cleaning operator. Available with three (3)
transition arrangements in Aluminum, Carbon Steel, and Stainless Steel.
#94S-M MAGNET SECTION WITH 3

MANUAL CLEANING OPERATOR
2 1
D
A
14"
ACCESS
DOOR
F
STRIPPER
PLATE
DESTACO
9.875" MAGNET LATCHES
DESTACO
E LATCHES
4
1
.75" C .75"
(INSIDE) PART NO. D (OD) A B C E F
94S-M-4 4 15.5 3 4.125 28 23.75
94S-M-5 5 15.5 4 6.125 31.5 26.75
B
(INSIDE) 94S-M-6 6 16.5 4 8.125 35 29.75
94S-M-8 8 17.5 5 10.125 42 35.75
94S-M-10 10 19.25 5.5 14.125 49 42.75
PART NO. (EXAMPLE)94S-M-5-B-1-1

MODEL OUTLET TRANSITION TYPE
(SEE NOTE #1) __________
INLET TRANSITION TYPE
CLEANING 1 - 90˚ TO CENTER LINE
__________ (SEE NOTE #3)
OD TUBE DIAMETER TRANSITION MATERIAL __________ 3 - VERTICAL
M-MANUAL (SEE NOTE #2) __________
1 - 90˚ TO CENTER LINE 4 - STRAIGHT THRU (OFFSET
__________ A - ALUMINUM FOR EVEN CENTER LINES
4" 5" 6" 8" 10" 2 - STRAIGHT THRU
B - MILD STEEL
3 - VERTICAL
S - STAINLESS STELL
NOTES: (1) Material of Construction for all body components to be 304SS

(2) OD tube Diameter to be constant at inlet and outlet transitions.
(3) Highest percentage of tramp metal retrieved with installed with inlet transition #1 or #2.

Series 95 Damper & 96 Tattle Tale Fittings

#95 DAMPER SECTION #95 ACTUATED DAMPER SECTION
L D
Controls air flow by reducing open Kice Series 95 Dampers are available
PART NO. D (OD) L
area of tube with minimum potential with an electric rotary actuator.
for dust to accumulate on internal 95A2 2 12 Automated Kice Series 95 Dampers
surfaces. Left Hand locking quadrant 95A2.5 2.5 12 have stem bearings and seals.
is standard (shown). 95A3 3 12
Quadrant marked for accurate 95A3.5 3.5 12 Automated is only full open or full close
positioning. (Tighten wingnut to lock 95A4 4 12
into position.) 95A4.5 4.5 12
95A5 5 12
Options: 95A5.5 5.5 12
Right Hand locking quadrant damper- 95A6 6 12
Specify "R/H Damper" 95A8 8 12
“A” in Specifies Aluminum. Specify “B” for
Steel. Specify “S” for Stainless Steel.
#96 TATTLE TALE SECTION
B A
Insufficient suction is indicated by Slight concave indicates proper

overinflated sleeve suction - severe concave indicates
too much suction
PART NO. D A B
Series 96 Tattle Tale sections are often used on the air outlet of a cyclone and/ 96A2 2 6 15
or other pneumatic lines to indicate proper suction. An over inflated sleeve may 96A2.5 2.5 6 15
indicate insufficient suction, while severe suction is shown by a concave sleeve. 96A3 3 6 15
Adjust and set damper for best results. 96A3.5 3.5 6 15
96A4 4 6 15
Damper is standard Left Hand quadrant. Right Hand quadrant also available 96A4.5 4.5 6 15
upon request. 96A5 5 6 15
96A5.5 5.5 6 15
Replacement Nylon/Satin Sleeve x 12" length available as spare part. Nylon/ 96A6 6 6 15
Satin Sleeve have no UV protection and will deteriorate quicker in outdoor 96A8 8 6 15
applications. “A” in part number Specifies Aluminum. Specify
“B” for Steel. Specify “S” for Stainless Steel.

Series 97/99 Fittings

#97 ATMOSPHERIC AIR OPENING
L D
PART NO. D (OD) L
97A3 3 12
97A4 4 12
97A5 5 12
97A6 6 12
“A” in Specifies Aluminum. Specify “B” for Steel. Specify “S”
for Stainless Steel.
Used to admit free air for maintaining conveying velocity in branch and main lines while reducing air volume being withdrawn
from controlled chamber. Adjustment made by loosening screw clamps and rotating to desired position, then tightening
screw clamps to maintain position.
#99 KICE NULL POINT FITTINGS
Kice Industries manufacturers a variety of styles of free ADJUSTABLE SLEEVE
air inlets, also known as “null point fittings.” The free air
inlet fittings allow air to enter the system. Typically, a sifter
performs best at atmospheric conditions, a Kice "Null Point
Fitting" on the inlets and outlets prevents excessive vacuum
or pressure from developing. In a pneumatic conveying
system, a Kice “Null Point Fitting” will allow make-up air into
the system to provide conveying velocity. Available in sizes, FLOW
materials and designs to meet your application.

DAMPER FREE AIR
REF: Kice Dwg 2-0134
TOP TO TOP TO BOTTOM QTY. 3

OVERALL OVERALL
CENTERLINE OF FREE AIR UP TO CENTERLINE HOLES
DIAMETER LENGTH
DAMPER ROD HOOD OF HOLE DIAMETER
3" 12.000" 2.000" 5.250" 5.250" 1.750"

3.5" 14.000" 2.750" 5.750" 6.625" 2.000"
4" 14.000" 3.000" 3.750" 6.625" 2.500"
5" 18.000" 3.000" 6.250" 9.750" 3.000"
6" 18.000" 3.375" 6.750" 9.000" 3.500"

Series SGH Streamguard Blender Fittings

Standard with a 304L Stainless Steel body and has an adjustable counterweight and adjustable air
inlet.
SGH STREAMGUARD BLENDER FITTING
A
E (INLET)
C
ADJUSTABLE
COUNTERWEIGHT
AIR IN
3"
CL
ADJUSTABLE
AIR INLET D
PIVOTED GATE
(STOCK RELIEF)
45˚ AIR IN
CL
CL B
(OUTLET)
(SYM)
ISO View
Kice SGH Streamguard Blender Fittings serve as an acceleration

zone for pneumatically conveyed stocks and also as an automatic
release for overload quantity.
When suction requirements for conveying exceed vacuum being PART NO. A B C D E F
developed by fan, the counter-weighted gate will fall away and SGH -4·3 4 3 11.75 13.875 5.5 4.75
permit excess stock to drop out of the system. SGH -5-4 5 4 12.625 17.5 6 5.75
SGH -5-5 5 5 12.625 17.5 5.5 5.75
When overload condition is corrected, air speed naturally SGH -6-6 6 6 14.0625 19.5625 7 6.75
increases and pulls gate back into place. Standard with
adjustable makeup air inlet.
Options:
• If larger than standard inlet is required on given body size, inlet
transition is required.
• Metric OD outlet sizes available on special order.
• Flanged connections.
• Non-standard sizes available on special order.

Porthole Sight Glasses

QUICK ACCESS PORTHOLE SIGHT GLASS BOLT-ON PORTHOLE SIGHT GLASS
GASKET
WELD FLANGE
FRAME
.25" THK SIGHT GLASS
GASKET
COVER FLANGE
DOOR
HARDWARE
ASSEMBLY
60˚ .25" THICK POLYCARBONATE

Typ
12 GA. OR EQUIV.
10" DIA. 7.375" DIA.

PHENOLIC
KNOB 11" 7.5"
(2 EACH)
6 EACH .3125" DIAMETER HOLES, 60˚ APART ON 8.875" BOLT

CIRCLE FOR .3125" FLAT COUNTERSUNK MACHINE SCREW
Kice Quick Access Porthole Sight Glass offers a 5 3/4" Kice Bolt-On Porthole Sight Glass offers a full 7.5"
round viewing area. round viewing area.
The unit has a Cast Aluminum frame and door. There The unit has a steel frame, with threaded studs, that
is a machined step in the Plexiglas for a flush internal can be welded to any flat steel surface. There is a
fit. With a 7.5" diameter hole cut in your flat surface, the machined step in the Plexiglas for a flush internal fit.
Quick Access Porthole Sight Glass can be bolted into A 7.125" hole should be cut into the existing surface.
place. It offers two phenolic twist knobs that secure the The Cast Aluminum flange aligns with the frame for
door in place. easy installation. The glass can be caulked for a
tight seal.
Available as an installed option on Kice Filters,
Hoppers, and other equipment or as a component part Available as an installed option on Kice Filters,
that can easily be installed in the field. Hoppers, and other equipment or as a component
part that can easily be installed in the field.
Note: Not for use on or near rotating equipment.
Note: bolt style may be used near rotating
equipment. Caution is required if glass is removed.

Hose And Hose Connection Products

In addition to rubber, Kice offers Kuriyama of America Tigerflex™ plastic hose as standard for many of
our pneumatic handling applications. Kuriyama and other manufacturers' products are available. Please
contact Kice Sales for more information.
TIGERCLAMP™ SERIES SB SPIRAL DOUBLE BOLT CLAMPS.
For use on Tigerflex™ hoses with convoluted

cover (counter-clockwise spiral only). For
adequate holding power, a single clamp may
be used on each end of 1 1/4"- 4" hose. Two
clamps are recommended for each end on 5"
hose and larger. Each clamp now provided with
threaded protective caps to help prevent injury.
TigerCiampTM Serial Double Bolt Clamps are
recommended for use on the following Tigerflex™
convoluted hoses: Series 2001, 2020, F, G, H,
J, K, MH (2"), PT, S, UBB, Ureflex-1, Ureflex-2, W,
WBS, WE, WG, WH, WT, and WU.
Caution: Proper evaluation of holding power for clamp must be determined
Note: Use of pneumatic air tools for tightening for each individual installation.
purposes is not recommended due to potential
clamp damage by excess torque. Both hex nuts FITS HOSE FITS HOSE
SERIES SERIES
should be tightened equally to prevent possible ID (IN.) ID (IN.)
leakage. If sockets are used, they should be SDBC-1.5 1.5 SDBC-6 6
deep well sockets. SDBC-2 2 SDBC-8 8
SDBC-3 3 SDBC-10 10
SDBC-4 4 SDBC-12 12
SDBC-5 5
TAD 688SB 690SB WE WT FT CWC HAR VAC

BLACK COVER X X X
GRAY COVER X X X
CLEAR COVER X X X
WHITE BORE X X
CLEAR BORE X X X
BLACK BORE X X X
PRESSURE RATED X X X X X X X X
VACUUM RATED X X X X X X X X
CORRUGATED COVER X X X X X X X
SMOOTH COVER X
WIRE REINFORCED X X X X
STATIC WIRE X X
FDA APPROVED X X X X X
OIL RESISTANT X
NUMBER OF PLYS 4 2 2 2 2 2 2 2 1
BEND RADIUS (X DIAMETER) NA 8X 6X 2-4X 3-5X 4-8X 1X 3X 1X
Kice Industries can offer many other types, sizes, styles, and manufacturers of hose beyond those listed. Rubber and
thermoplastics hose manufacturers such as Goodyear, Gates, Flexhaust, Duravent, Boston, and Kuriyama of America
manufacture many different sizes, styles and types of hoses, many application specific. We welcome your inquiries
and will work to meet your plant requirement. We can also provide different styles of flexible metal hoses and coupling
connections. Please contact Kice QuikShip or Kice Technical Sales with your application.

Camlock Connections
Kice camlock fittings are available from stock in Aluminum and Brass. Camlock connections meet
MIL-C-27487 and are interchangeable with other manufacturers connections through 6" size. Other
materials & sizes available on special order.
PART A MALE ADAPTERS - FEMALE THREAD PART B FEMALE COUPLERS - MALE THREAD
BSP and BST threads available on request.
Aluminum couplers are standard with
Available in 8" and 10" sizes. Please call for stainless-steel handles. Brass handles
more information. available on request.
available in 8" and 10" sizes. Please call for

more information.
ITEM ITEM
SIZE SIZE
CODE CODE
20A-XX 2" 20B-XX 2"
25A-XX 2.5" 25B-XX 2.5"
30A-XX 3" 30B-XX 3"
40A-XX 4" 40B-XX 4"
50A-XX 5" 50B-XX 5"
60A-XX 6" 60B-XX 6"
PART C FEMALE COUPLERS - HOSE SHANK PART D FEMALE COUPLERS - FEMALE THREAD
Aluminum couplers are standard with
Available in 8" and 10" sizes. Please call for stainless-steel handles. Brass handles
more information. available on request.
Available in 8" and 10" sizes. Please call for

more information.
ITEM ITEM
SIZE SIZE
CODE CODE
20C-XX 2" 20D-XX 2"
25C-XX 2.5" 25D-XX 2.5"
30C-XX 3" 30D-XX 3"
40C-XX 4" 40D-XX 4"
50C-XX 5" 50D-XX 5"
60C-XX 6" 60D-XX 6"
METAL SELECTION: XX indicates that a metal selection must be designated when ordering: BR = Brass; AL = Aluminum; SS = 316 Stainless Steel
Other available materials include Carbon Steel, Stainless Steel, Ductile Iron, Nylon, and Polypropylene.
Many other sizes and types of connections also available. Contact Kice with your special requirements.
A complete line of spare parts and accessories, including replacement gaskets, cam arm assemblies,
and safety chains, are available from Kice Industries.

PART E MALE ADAPTERS - HOSE SHANK PART F MALE ADAPTERS - MALE THREAD
Available in 8" and 10" sizes. Please call Available in 8" and 10" sizes. Please call
for more information. for more information.
ITEM ITEM
SIZE SIZE
CODE CODE
20E-XX 2" 20F-XX 2"
25E-XX 2.5" 25F-XX 2.5"
30E-XX 3" 30F-XX 3"
40E-XX 4" 40F-XX 4"
50E-XX 5" 50F-XX 5"
60E-XX 6" 60F-XX 6"
PART W DUST PLUG FOR USE WITH COUPLERS PART V DUST CAP FOR USE WITH ADAPTERS
Not to be used in pressure applications. Not to be used in pressure applications.
Available in 8" and 10" sizes. Please call Aluminum couplers are standard with
for more information. stainless-steel handles. Brass handles
available on request.
Available in 8" and 10" sizes. Please call

ITEM ITEM for more information.
SIZE SIZE
CODE CODE
20W-XX 2" 20V-XX 2"
25W-XX 2.5" 25V-XX 2.5"
30W-XX 3" 30V-XX 3"
40W-XX 4" 40V-XX 4"
50W-XX 5" 50V-XX 5"
60W-XX 6" 60V-XX 6"
FEMALE CAMLOCK LINE ADAPTERS MALE CAMLOCK LINE ADAPTERS

Female fitting with tube stub welded on. Male fitting with tube stub welded on.
available in different gauges of tubing. available in different gauges of tubing.
ITEM ITEM
SIZE SIZE
CODE CODE
20QXX-FXX 2" 20Q-XXMXX 2"
25QXX-FXX 2.5" 25Q-XXMXX 2.5"
30QXX-FXX 3" 30QXX-MXX 3"
METAL SELECTION: XX indicates that a metal selection must be designated when ordering: BR = Brass; AL = Aluminum; SS = 316 Stainless Steel
Other available materials include Carbon Steel, Stainless Steel, Ductile Iron, Nylon, and Polypropylene.
Many other sizes and types of connections also available. Contact Kice with your special requirements.
A complete line of spare parts and accessories, including replacement gaskets, cam arm assemblies,
and safety chains, are available from Kice Industries.

Tube & Pipe Bend Availability Chart

Kice utilizes several manufacturers of tubing and
tube benders. Combined with our inventory, no other
supplier provides the full range of products and
services to the pneumatic conveying industry.
Pipe and tube bends of up to 180 degrees are available

in aluminum, stainless, carbon steel, and galvanized
in the sizes listed below. Other centerline radii are
available but not shown. Special shapes, "U" bends,
offsets, and bifurcated bends available upon request.
A large inventory is maintained, available for 72-hour

shipment direct from our suppliers. Many popular
bend sizes are stocked in carbon steel, aluminum, and
stainless steel materials.
D (OD) AVAILABLE CENTERLINE

TUBE SIZE PIPE SIZE TANGENT
IN MM RADII (CLR) INCHES
2" 2.00 50.80 2.5, 6, 8.5, 9, 10, 12, 18, 24, 30, 36, 48 4"
2" 2.375 60.20 6, 7.5, 10, 12, 17, 24, 30, 36, 48 4"
2.5" 2.50 63.5 4, 6, 9, 12, 15, 17, 24, 30, 36, 48 5"
2.5" 2.875 73.0 17, 24, 30, 36, 48, 60 5"
3" 3.00 76.2 4.5, 7.5, 9, 10, 12, 15, 18, 24, 30, 36, 48, 52, 60 6"
3.5" 3" 3.50 88.99 6, 12, 15, 16, 18, 24, 30, 36, 48 7" (6" - PIPE)
4" 3.5" 4.00 101.6 12, 18, 20, 24, 30, 32, 36, 48, 60 8" (7" - PIPE)
4.5" 4" 4.50 114.30 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 9" (8" - PIPE)
5" 5.00 127.00 12, 24, 30, 36, 48, 60, 90 10"
5" 5.563 114.30 20, 30, 36, 42, 48, 60, 72 10"
6" 6.00 152.40 9, 15, 24, 30, 36, 48, 60, 72 12"
6" 6.625 168.20 24, 30, 36, 48, 60, 72 12"
8" 8.00 203.20 12, 20, 48, 60, 72 16"
8" 8.625 219.10 32, 40, 48, 60, 72 16"
Standard Tubing OD Wall Thickness: Standard Material of Constructio:

16 ga. (.065") Aluminum: 6063-T1 extruded
14 ga. (.083") Stainless Pipe: T304 ASTM A312
11 ga. (.120") Stainless Tube: T304 ASTM A249
Iron Pipe Size (IPS): Carbon Steel Pipe: ASTM A53
Sch. 5 Carbon Steel Tubing: ASTM A513
Sch. 10 Galvanized Pipe: ASTM A53
Sch 40 Galvanized Tubing: ASTM A513
Other wall thickness available upon request

Materials Of Construction, Tube Data & Formulas

Kice Industries uses common materials of construction and has determined data based on these
materials. Other materials of construction are also available. Please contact Kice Technical Sales for
help in determining correct material for your application.
TYPICAL MATERIALS OF CONSTRUCTION

Carbon Steel:
Tubing: HREW, Hot Rolled, Electric Weld, Flash Controlled to 0.0015"
Plate: Hot Rolled to ASTM A36
Sheet: Hot Rolled to ASTM A569
Aluminum:
Tubing: Welded 3004H26 to ASTM 8210
Barstock: 2024T3 - Heat Treatable, to ASTM A209 with Mill Finish
Plate: 3003H14 toASTM 8209 and 6061T6 toASTM 209 with Mill Finish
Sheet: 3003H14 toASTM 8209 and 6061T6 toASTM 209 with Mill Finish
304L Stainless Steel:
Tubing: Cold Finished, Annealed and Pickled, Welded to ASTM A249/A269
Plate: Cold Rolled, Annealed and Pickled to ASTM A240, with 28 Finish(annealed, pickled, and bright cold
rolled) outside, Mill Finish inside
Sheet: Cold Rolled, Annealed and Pickled to ASTM A240, with 28 Finish (annealed, pickled, and bright
cold rolled) outside, Mill Finish inside.
Other materials are available from Kice Industries. Contact Technical Sales for more information.
COMMON OUTSIDE DIAMETER (OD) TUBING WALL THICKNESSES
TUBE
18 17 16 15 14 13 12 11 .125 10 9 .1562 8 7 .1875 6 .25
GAUGE
WALL
.049 .058 .065 .075 .083 .095 .109 .120 .125 .134 .148 .156 .165 .180 .188 .203 .250
THICKNESS
Common OD tubing thickness used by Kice Industries, Inc. are noted in the bold boxes above.
TUBE DATA SHEET

VELOCITY - FEET PER MINUTE
TUBE AREA 3500 @ .76 IN.WC 4000 @ 1.0 IN.WC 4500 @ 1.26 IN.WC 5000 @ 1.55 IN.WC 90O ELLS IN
O.D. I.D. SQ. IN. SQ. FT. CFM IN.WC/100' CFM IN.WC/100' CFM IN.WC/100' CFM IN.WC/100' EQUIV. FT.
1 1/2" 1.37" 1.48 .0103 36 15.0" 41 18.0" 46 22" 52 27.5" 4'
2" 1.87" 2.76 .0192 67 9.5" 77 13.0" 86 15.5" 96 18.75" 5'
2 1/2" 2.37" 4.43 .0308 105 6.5" 123 9.5" 138 11.0" 154 13.5" 6'
3" 2.87" 6.49 .0451 158 5.5" 180 7.5" 203 8.75" 225 11.0" 8'
3 1/2" 3.37" 8.95 .0621 217 4.75" 248 6.3" 280 7.75" 310 8.75" 9'
4" 3.87" 11.79 .0819 285 4.0" 328 5.3" 370 6.25" 410 7.5" 10'
4 1/2" 4.37" 15.02 .1043 365 3.5" 418 4.6" 469 5.5" 522 6.5" 11'
5" 4.87" 18.60 .1292 452 3.0" 517 4.0" 580 4.8" 646 5.75" 12'
5 1/2" 5.37" 22.70 .1576 552 2.6" 630 3.7" 710 4.3" 788 5.2" 14'
6" 5.87" 27.01 .1882 659 2.2" 753 3.3" 847 3.9" 941 4.6" 15'
8" 7.87" 48.70 .3382 1184 1.6" 1353 2.3" 1522 2.7" 1691 3.2" 20'
10" 9.75" 74.66 .5185 1815 1.3" 2074 1.7" 2333 2.1" 2593 2.9" 25'
12" 11.75" 108.43 .7530 2635 1.1" 3012 1.4" 3388 1.7" 3765 2.1" 30'
Tube ID and area based on .065" wall thickness, except 1 0" and 12"00 have .125" wall thickness. Based on air@ .075 lbs/cu. ft. standard density.
USEFUL FORMULAS
Area of a Circle (Sq. Ft.)= 3.1416 x r2 (or .7854 x D2) Standard air at 70°F and sea level weighs 0.075 lbs/cu ft
Volume (CFM) =Velocity (Ft./Min.) x Area (Sq. Ft.) 1 inch = 25.4 millimeters
Pv =Velocity Pressure, in.wc 1 millimeter= 0.03937 inch
1" of Water Column (W.C.) = 0.03613 lbs. per sq. Inch Temperature Conversion Formulas:
For standard air, Velocity (Ft./Minute)= 4005 x √Pv Celsius = .556 x (F-32), Fahrenheit= (1.8 x C)+32

Pipe & Flange Dimensions

Kice Industries commonly uses 16 ga., 14 ga., and 11 ga. OD tubing for systems and product
connections. Iron Pipe Size is also used when specified by the customer. Please use these charts to
help determine your system requirements.
COMMON IRON PIPE SIZE (IPS) PIPE DIMENSIONS AND WEIGHTS
PIPE SCHEDULES
PIPE OD IN 5S 5 10S 10 40S & STD 40 80S & EH 80
SIZE INCHES WALL WT/FT WALL WT/FT WALL WT/FT WALL WT/FT WALL WT/FT WALL WT/FT WALL WT/FT WALL WT/FT
.125" .405 --- --- .035 .1383 .049 .1863 .049 .1863 .068 .2447 .068 .2447 .095 .3145 .095 .3145
.25" .540 --- --- .049 .2570 .065 .3297 .065 .3297 .088 .4248 .088 .4248 .119 .7388 .119 .5351
.375" .675 --- --- .049 .3276 .065 .4235 .065 .4235 .091 .5676 .091 .5676 .126 .7388 .126 .7388
.5" .840 .065 .5383 .083 .6710 .083 .6710 .109 .8510 .109 .8510 .109 .8510 .109 .8510 .147 1.088
.75" 1.050 .065 .6838 .065 .6838 .083 .8572 .083 .8572 .113 1.131 .113 1.131 .154 1.474 .154 1.474
1" 1.315 .065 .8678 .065 .8678 .109 1.404 .109 1.404 .133 1.679 .133 1.679 .179 2.172 .179 2.172
1.25" 1.660 .065 1.107 .065 1.107 .109 1.806 .109 1.806 .140 2.723 .140 2.723 .191 2.997 .191 2.997
1.5" 1.900 .065 1.274 .065 1.274 .109 2.085 .109 2.085 .145 2.718 .145 2.718 .200 3.631 .200 3.631
2" 2.375 .065 1.604 .065 1.604 .109 2.638 .109 2.638 .154 3.653 .154 3.653 .218 5.022 .218 5.022
2.5" 2.875 .083 2.475 .083 2.475 .120 3.531 .120 3.531 .203 5.793 .203 5.793 .276 7.661 .276 7.661
3" 3.500 .083 3.209 .083 3.209 .120 4.332 .120 4.332 .216 7.576 .216 7.576 .300 10.25 .300 10.25
3.5" 4.000 .083 3.472 .083 3.472 .120 4.937 .120 4.937 .226 9.109 .226 9.109 .318 12.51 .318 12.51
4" 4.500 .083 3.915 .083 3.915 .120 5.613 .120 5.613 .237 10.79 .237 10.79 .337 14.98 .337 14.98
4.5" 5.000 --- --- --- --- --- --- --- --- .247 12.54 --- --- .355 17.61 --- ---
5" 5.563 .109 6.349 .109 6.349 .134 7.770 .134 7.770 .258 14.62 .258 14.62 .375 20.78 .375 20.78
6" 6.625 .109 7.585 .109 7.585 .134 9.290 .134 9.290 .280 18.97 .280 18.97 .432 28.57 .432 28.57
7" 7.625 --- --- --- --- --- --- --- --- .301 23.54 --- --- .500 38.04 --- ---
8" 8.625 .109 9.914 .109 9.914 .148 13.40 .148 13.40 .322 28.55 .322 28.55 .500 43.39 .500 43.39
9" 9.625 --- --- --- --- --- --- --- --- .342 33.91 --- --- .500 48.73 --- ---
10" 10.75 .134 15.19 .134 15.19 .165 18.65 .165 18.65 .365 40.48 .365 40.48 .500 54.74 .500 54.74
11" 11.75 --- --- --- --- --- --- --- --- .375 45.56 --- --- .500 60.08 --- ---
12" 12.75 .156 21.07 .165 22.18 .180 24.16 .180 24.16 .375 49.56 .406 53.52 .500 65.42 .688 88.63
14" 14.00 .156 23.07 --- --- .188 27.73 .250 45.61 .375 54.57 .438 63.44 .500 72.09 .750 106.1
16" 16.00 .165 27.90 --- --- .188 31.75 .250 52.27 .375 62.58 .500 82.77 .500 82.77 .844 136.6
18" 18.00 .165 31.43 --- --- .188 35.76 .250 58.94 .375 70.59 .562 104.7 .500 93.45 .938 170.9
20" 20.00 .188 39.78 --- --- .218 46.05 .250 78.60 .375 78.60 .594 123.1 .500 104.1 1.031 208.9
Although pipe size products are not common in Kice equipment, they are used. This is a guildline for determining if your project requires nominal pipe size
(IPS) or Outside Diameter (OD) tubing.
BASIC DIMENSIONS FOR ANSI 150# FLANGES
IRON PIPE SIZE (IPS) 2" 2.5" 3" 3.5" 4" 5" 6" 8" 10" 12"
OUTSIDE DIAMETER 6" 7" 7.5" 8.5" 9" 10" 11" 13.5" 16" 19"
BOLT CIRCLE 4.75" 5.5" 6" 7" 7.5" 8.5" 9.5" 11.75" 14.75" 17"
NUMBER OF BOLT HOLES 4 4 4 8 8 8 8 8 12 12
DIAMETER OF BOLT HOLES .75" .75" .75" .75" .75" .875" .875" .875" 1" 1"
IRON PIPE SIZE (IPS) 14" 16" 18" 20" 24"

OUTSIDE DIAMETER 21" 23.5" 25" 27.5" 32"
BOLT CIRCLE 18.75" 21.25" 22.75" 25" 29.5"
NUMBER OF BOLT HOLES 12 16 16 20 20
DIAMETER OF BOLT HOLES 1.25" 1.125" 1.25" 1.25" 1.3125"
Flange thicknesses vary depending on type of flange.

Kice Airlock Round And Square Flange Dimensions

Kice Speed Spout is often connected to Kice Airlocks, Cyclones, and other Kice equipment. Below are
the typical flange dimensions for Kice Round & Square VJ & VJOT, Square VD & VDOT, and Round VB
& VBOT Kice Airlocks.
VJ & VJOT BODY

MODEL A B C D E F
VJ & VJOT 8X6X6 5.75 9 3.125 2.125 --- .375" UNC
VJ & VJOT 10X8X8 7.75 11 3.25 3.25 --- .375" UNC
VJ & VJOT 12X8X8 7.75 11 3.25 3.25 --- .375" UNC
VJ & VJOT 14X10X10 9.75 13.25 3.875 3.875 --- .375" UNC D C D
VJ & VJOT 16X12X12 11.75 15.25 4.5 4.5 --- .375" UNC
VJ & VJOT 18X12X12 11.75 15.25 4.5 4.5 --- .375" UNC
VJ & VJOT 18X14X14 13.75 17.25 5.25 5.25 --- .375" UNC
VJ & VJOT 20X12X12 11.75 15.25 4.5 4.5 --- .375" UNC
VJ & VJOT 20X15X15 14.75 18.25 5.5 5.5 --- .375" UNC
VJ & VJOT 24X15X15 14.75 18.0625 5.5 5.5 --- .375" UNC
VJ & VJOT 24X20X20
VJ & VJOT 30X24X24 24 29 1/16 0 4.5 24 HOLES .625" UNC
B SQ.
VD & VDOT BODY A SQ.
MODEL A B C D E F
VD 6X6X6 6 9.25 3.125 2.125 .4375 ---
VD & VDOT 8X6X6 6 9.25 3.125 2.125 .4375 ---
VD & VDOT 10X6X6 6 9.25 3.125 2.125 .4375 ---
VD & VDOT 10X8X8 8 11.25 3.25 3.25 .4375 ---
VD & VDOT 12X8X8 8 11.25 3.25 3.25 .4375 ---
VD & VDOT 14X10X10 10 13.25 3.875 3.875 .4375 ---
VD & VDOT 16X12X12 12 15.375 4.5 4.5 .4375 --- E - HOLE DIAMETER WHEN DRILLED
VD & VDOT 18X12X12 12 15.375 4.5 4.5 .4375 --- F - TAP SIZE FOR VJOT SERIES
VD & VDOT 18X14X14 14 17.375 5.25 5.25 .4375 ---
VD & VDOT 20X12X12 12 15.375 4.5 4.5 .4375 ---
VD & VDOT 20X15X15 15 18.375 5.5 5.5 .4375 ---
VD & VDOT 24X15X15 15 18.375 5.5 5.5 .4375 ---
VJ & VJOT BODY

MODEL A B C E F G
VJ 6X6 5.75 9 8 --- .375" UNC 45 DEG. 8
F VJ & VJOT 8X6 5.75 9 8 --- .375" UNC 45 DEG. 8
VJ & VJOT 10X8 7.75 11 10 --- .375" UNC 45 DEG. 8
VJ & VJOT 12X8
C
VB & VBOT BODY
B MODEL A B C D F G
A
VB 6X6 6 9.25 8 .4375 --- 45 DEG. 8
VB & VBOT 8X6 6 9.25 8 .4375 --- 45 DEG. 8
VB & VBOT 10X6 6 9.25 8 .4375 --- 45 DEG. 8
VB & VBOT 10X8 8 11.25 10 .4375 --- 45 DEG. 8
VB & VBOT 12X8 8 11.25 10 .4375 --- 45 DEG. 8
VB & VBOT 14X10 10 13.25 12 .4375 --- 45 DEG. 8
VB & VBOT 16X12 12 15.375 14 .4375 --- 45 DEG. 8
VB & VBOT 18X12 12 15.375 14 .4375 --- 45 DEG. 8
VB & VBOT 18X14 14 17.375 16 .4375 --- 45 DEG. 8
D - HOLE DIAMETER WHEN DRILLED
E - TAP SIZE FOR VJOT SERIES VB & VBOT 20X12 12 15.375 14 .4375 --- 45 DEG. 8
G - NUMBER OF BOLT HOLES VB & VBOT 20X15 15 18.375 16.75 .4375 --- 30 DEG. 12
VB & VBOT 24X15 15 18.375 16.75 .4375 --- 30 DEG. 12

5500 N. Mill Heights Dr.
Wichita, KS 67219-2358
(P) 316.744.7151
(F) 316.744.7355
[email protected]
kice.com
© 2013 Kice Industries, Inc. PDB-3-8/12

KICE INDUSTRIES Spout Manual

Uploaded by

Copyright:

Available Formats

KICE INDUSTRIES Spout Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KICE INDUSTRIES Spout Manual

Uploaded by

Copyright:

Available Formats

Skilled Air for Industry

Speed Spout Manual

71-2 79N 79NL 79NLV

Type C & E Camlocks 82 86 84 88 Angle Ring Flange

[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

ELBOWS SIGHT GLASSES

[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Kice Formed Long Sweep Tube Elbows

CENTERLINE RADII GAUGE T

CENTERLINE RADII GAUGE T 45˚

4 [email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Extended Tangent “T” Series Flat Back Elbows

Recommended where wear is a problem.

[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com 5

Series 11 & 12 Elbows

#11 FREE FLOW CAST ELBOWS #12 ROTAJUST ELBOWS

30˚ 5 6.75 2 11A5-30 11B5-30

6 8 2.5 11A6-35 — 12A4 12B4 4 7.25 7.25 6.125 .875

"—" indicates not available in Cast Iron

6 [email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Standard Long Radius Elbows

PART NO. (EXAMPLE) 3 B 4 - 9 0 - 1 6

Centerline Radius of Elbow Material thickness in gauge

3B4-90-16 Elbow = 36"CLR, Carbon Steel, 4"OD, 90deg, 16ga Elbow

PART NO. D (OD) GAUGE B R T

2B2-90-16 2" 16GA 28" 24" 4"

2B2.5-90-16 2.5" 16GA 29" 24" 5"

2B3-90-16 3" 16GA 30" 24" 6"

2B3.5-90-11 3.5" 11GA 31" 24" 7"

3B4-90-16 4" 16GA 44" 36" 8"

3B4.5-90-14 4.5" 14GA 45" 36" 9"

3B5-90-14 5" 14GA 46" 36" 10"

3B6-90-14 6" 14GA 48" 36" 12"

4B8-90-11 8" 11GA 64" 48" 16"

PART NO. D (OD) GAUGE X Y R T

2B2-45-16 2" 16GA 9.875 25.750 24" 4"

2B2.5-45-16 2.5" 16GA 10.500 27.500 24" 5"

2B3-45-16 3" 16GA 11.250 27.250 24" 6"

2B3.5-45-11 3.5" 11GA 11.875 31.375 24" 7"

3B4-45-16 4" 16GA 16.250 39.125 36" 8"

3B4.5-45-14 4.5" 14GA 16.875 40.875 36" 9"

3B5-45-14 5" 14GA 17.500 42.500 36" 10"

3B6-45-14 6" 14GA 19.125 49.750 36" 12"

4B8-45-11 8" 11GA 25.375 61.250 48" 16"

[email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com 7

14 Short Radius Elbows

#14 SHORT RADIUS FORMED 90° ELBOWS

PART NO. D (OD) GAUGE B R T

PART NO. D (OD) GAUGE X Y R T

8 [email protected] | Toll-Free: 877.289.5423 | Fax: 316.295.2411 kice.com

Special Long Sweep Tube Elbows & Sand-T Ells

KICE SAND-T ELLS

Note: 45 degree Sand-T Ells available upon request.

PART NO. D (OD) B R T

SANDELL2 2" 5.5" 3" 9.5"

SANDELL2.5 2.5" 6" 3" 10.5"

SANDELL3 3" 6.375" 3" 11.75"

SANDELL4 4" 7.125" 3" 13.75"

SANDELL5 5" 7.875" 3" 15.75"