NX100 ROBOT CONTROLLER offers high performance, open communication, and integrated cell control. Revolutionary controller features a windows(r) CE programming pendant with color touch screen. Dual-channel safety features include enhanced E-Stop functionality, integrated speed monitoring.
NX100 ROBOT CONTROLLER offers high performance, open communication, and integrated cell control. Revolutionary controller features a windows(r) CE programming pendant with color touch screen. Dual-channel safety features include enhanced E-Stop functionality, integrated speed monitoring.
NX100 ROBOT CONTROLLER offers high performance, open communication, and integrated cell control. Revolutionary controller features a windows(r) CE programming pendant with color touch screen. Dual-channel safety features include enhanced E-Stop functionality, integrated speed monitoring.
NX100 ROBOT CONTROLLER offers high performance, open communication, and integrated cell control. Revolutionary controller features a windows(r) CE programming pendant with color touch screen. Dual-channel safety features include enhanced E-Stop functionality, integrated speed monitoring.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1of 2
SOLUTIONS IN MOTION
OPTIONAL CUSTOM HMI
MULTIPLE ROBOT CONTROL
ROBOT CONTROLLER
NX100
Motoman Robotics NX100 robot controller offers high performance, open communication, and integrated cell control
LADDER EDITOR
FEATURES & OPTIONS
n
Patented multiple robot control capability (up to FOUR robots with one pendant) Windows CE operating system on programming pendant Standard Ethernet communication Compliance with ANSI/RIA R15.06-1999 safety standard Unmatched memory: 60,000 steps (taught points), 10,000 ladder (concurrent I/O) instructions On-board graphical ladder editor Ability to fit up to three external axis servo amplifiers
n n
The revolutionary NX100 controller features a Windows CE programming pendant with color touch screen, highspeed processing, unmatched memory (60,000 steps, 10,000 instructions), built-in Ethernet, and a robust PC architecture. The NX100 features password protection with four levels and up to 100 individual users. The NX100 easily handles multiple tasks, with unmatched ability to control up to four robots (up to 36 axes, including robots and external axes), and I/O devices. Dynamic interference spheres protect the robot arm, providing collision avoidance/arm interference prevention. Advanced Robot Motion (ARM) control provides high-performance path accuracy and vibration control. In addition, the NX100 features best-in-class path planning that dramatically reduces teaching time. The programming pendant features a unique cross-shaped navigation cursor that reduces teaching time by 30 percent. It has full-color touch-screen display and a convenient compact flash slot for easy
memory back-ups. All operator controls are located on the pendant, allowing the control cabinet to be mounted remotely. Dual-channel safety features include enhanced E-Stop functionality, integrated speed monitoring, and manual brake release for the robot. The NX100 also offers unmatched connectivity, highly flexible Fieldbus support, and easy connection to an information infrastructure through standard network options for DeviceNet, ControlNet, Profibus-DP, EtherNet/IP, and many others. An optional web server that allows remote monitoring and diagnosis is available. By eliminating the need for a separate PLC, PC-based human machine interface (HMI), and separate password protection hardware, and by providing a standard Ethernet port, the NX100 delivers significant cost savings at the system level, while also decreasing system complexity and improving overall system reliability.
NX100 Robot Controller
650 650
NX100 ROBOT CONTROLLER SPECIFICATIONS
Dimensions Approximate Mass Cooling System Ambient Temperature Relative Humidity Primary Power Requirements Digital I/O NPN - Standard PNP - Optional Position Feedback Program Memory Interface Multiple Robot Control 650(w) x 1,200(h) x 650(d) mm (25.6" x 47.2" x 25.6") 150-250 kg (330.8-551.3 lbs.) Indirect cooling During operation: 0 C (32 F) to 45 C (113 F) During transport and storage: -10 C (14 F) to +60 C (140 F) 90% max. non-condensing 3-phase, 240/480/575 VAC at 50/60 Hz Standard I/O: 40 inputs/40 outputs consisting of 16 system inputs/16 system outputs, 24 user inputs/24 user outputs Expandable to 1024 inputs/1024 outputs Absolute encoder 60,000 steps and 10,000 instructions Ethernet, RS-232C Dual, triple, and quad
1200
SAFETY FEATURES
All dimensions are metric (mm) and for reference only.
Dual-channel Emergency Stop Pushbuttons, 3-Position Enable Switch built into pendant, Manual Brake Release Meets ANSI/RIA R15.06-1999 safety standard Collision avoidance zones and radial interference zones Protects robot by monitoring torque levels on manipulator Permits testing of peripheral devices without robot operation Prevents robot operation while safety circuit is open
DOOR PENDANT
Pendant Dimensions Pendant Display Pendant Languages Pendant Weight Coordinate System Windows Menu-Driven Interface Pendant O/S Protection Rating
199 x 338 x 60 mm (7.8" x 13.3" x 2.4") 6.5 inch full color touch screen, 640 x 480 (VGA) English, German, Japanese, Spanish, Chinese 1.34 kg (2.96 lbs.) Joint, rectangular, cylindrical, tool, 24 user-coordinate frames User-selectable touch-screen menu Compact Flash slot for backup Windows CE IP65
Standard I/O - NPN
650
Forty optically isolated inputs, 32 transistor outputs, 8 relay contact outputs (configured to optimize each application), and four break-out cards are provided as standard. For arc welding applications, one XEW01 welder interface board is installed in the cabinet as standard.
PROGRAMMING
Programming Language Robot Motion Control Speed Adjustment Device Instructions I/O Instructions Operation
INFORM III, menu-driven programming Joint motion, linear, circular, spline interpolation Percentage of maximum for joint motion; mm/sec, cm/min, in/min for displacement; /sec for orientation Application-specific (ARCON, ARCOFF, LASERON, LASEROFF, HANDON, HANDOFF) Discrete I/O, 4-bit and 8-bit manipulation, analog output, analog input, analog scaling, sloping Up to 5 levels of undo/redo
I/O Expansion
MAINTENANCE
The NX100 supports I/O expansion via: Profibus-DP ControlNet Analog I/0 DeviceNet Remote I/0 Discrete I/O, NPN or PNP EtherNet/IP Other networks available
System monitor, internal maintenance clocks Classifies errors and major/minor alarms and displays data Displays alarm messages for peripheral devices Alarm messages and alarm history Permits simulated enabled/disabled input/output Automatically calibrates parameters for end-effectors, optional TCP recovery function Automatically calibrates total weight of tool, center of gravity and inertia for peak performance
www.motoman.com TECHNICAL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DS-232-F 2011 yASkAWA AMERICA, INC. JUNE 2011
MOTOMAN IS A REGISTERED TRADEMARk WINDOWS IS A REGISTERED TRADEMARk OF MICROSOFT ALL OTHER MARkS ARE THE TRADEMARkS AND REGISTERED TRADEMARkS OF yASkAWA AMERICA, INC.
