AWTP SCADA and Electrical Drawings IFT

Amherstburg WTP, 415 Front Rd N.
, Amherstburg, ON, N9V 2V5
Drawing Index Drawing Index

E-001 Electrical Legend & Abbreviations EI-612 RIO-2 IO Schedule
E-101 Electrical Site Plan EI-613 RIO-3 IO Schedule
E-102 Site Plan Details EI-614 RIO-4 IO Schedule
ED-111 Low Lift and Basement Plan Removals Elevation 580.00 DI-001 P&ID Legend
ED-112 High Lift Plan Removals Elevation 597.50 DI-002 P&ID Legend
ED-113 Filter Pipe Gallery Plan Removals Elevation 597.50 DI-003 P&ID Legend
ED-117 Chlorine/Chemical Rm. Plan Removal Elevation 597.50 DI-601 P&ID Low Lift Pumping
E-111 Low Lift and Basement Plan Proposed Elevation 580.00 DI-602 P&ID Clarifiers
E-112 High Lift Plan Proposed Elevation 597.50 DI-603 P&ID Filters
E-113 Filter Pipe Gallery Plan Proposed Elevation 597.50 DI-604 P&ID High Lift Pumping
E-114 Filter Gallery Plan Elevation 611.50 DI-605 P&ID Alum & Polymer
E-115 Control Room Plan Elevation 611.50 DI-606 P&ID Chlorine
Amherstburg WTP E-116

E-117
ED-501
E-501
E-502
Clarifier Plan Elevation 608.00
Chlorine/Chemical Rm. Plan Proposed Elevation 597.50
General Arrangement Existing MCC-1
General Arrangement SWB-1, MCC-1, MCPs
Clarifier Terminal Box Details
DI-607 P&ID Water Tower
Electrical & SCADA Upgrades

ED-601 Single-line Diagram Removals
ED-602 Single-line Diagram Removals
E-601 Single-line Diagram SWB-1
E-602 Single-line Diagram MCC-1
E-611 Lighting Panel Schedule LP-A
E-612 Lighting Panel Schedule LP-B & LP-C
E-613 Lighting Panel Schedule LP-B3
E-621 Control Schematics Automatic Transfer Switch
E-631 Control Schematics MCP-1/2/3/5/6/7/9 MCC-1
E-632 Control Schematics MCC-1
E-633 Control Schematics Miscellaneous
EI-601 Network Architecture
EI-602 Network Schematic
EI-501 SCADA Control Panel General Arrangment
EI-502 SCADA Control Panel Bill of Material
EI-503 SCADA Control Panel Terminal Block General Arrangment
EI-511 Communication Panel COM-2 General Arrangment & Bill of Material
Tender E08-2020-040 EI-521

EI-531
EI-621
OIT Panel & WAO General Arrangement & Bill of Materials
RTU Control Panel General Arrangment & Bill of Materials
SCADA Control Panel Typical AC/DC Distribution
\\cd1223-f01\01656\active\165620209\design\drawing\electrical\165620209-e000
EI-622 SCADA Control Panel Typical PLC Card Wiring
April 29th, 2022 EI-631

EI-632
EI-633
Loop Diagrams SCADA Control Panels
EI-611 RIO-1 IO Schedule
PROJECT NUMBER: 165620209

ORIGINAL SHEET - ANSI D
2022.05.03 11:48:07 AM
1 2 3 4 5
LAYOUT & PLANS SINGLE-LINE DIAGRAMS & POWER SCHEMATICS CONTROL SCHEMATICS DEVICE FUNCTION NUMBERS AND ACRONYMS
POWER SECURITY & SENSORS BREAKERS, SWITCHES, FUSES MOTOR CONTROL, CONVERTERS INSTRUMENT TRANSFORMERS MOTOR STARTERS & CONTACTORS INDICATING LIGHTS 2 Time-delay starting or closing relay
11 Multi-function relay
3 Motor starter (M, 42M) coil, Indicating light 21 Distance or impedance relay
Current transformer (CT) M A
Motor Security keypad 52 Manual motor starter (MS) Contactor (C, 42C) coil (letter indicates colour) 26 Thermal device (T-transformer winding, Q-oil)
K Power circuit breaker
42M 27 Undervoltage relay
3 Bushing current transformer Indicating light, push-to-test 42 Contactor
Power contact R Stantec Consulting Ltd.
(BCT) (letter indicates colour) 43 Selector switch
Draw-out power circuit Contactor (C, 42C) 171 Queens Avenue, 6th Floor
Disconnect switch OS Motion / occupancy sensor 52 46 Reverse Phase or Phase Balance Relay
breaker 42M London ON N6A 5J7
FVC Full-voltage contactor 3
Voltage transformer (VT) Power contact, vacuum 47 Phase Sequence Voltage Relay Tel: 519.645.2007
A Amber R Red 49 www.stantec.com
Machine or Transformer Thermal Relay
Motor starter /w O/L relay B Blue W White
Power circuit breaker (<1kV) 42M/a 50 Instantaneous Overcurrent
Fused disconnect switch DP Door position switch 52 FVNR Full-voltage non-revers.
Capacitive voltage Normally open auxiliary
G Green Y Yellow Copyright Reserved
D LSIG /w electronic trip unit FVR Ful-voltage reversing 3 51 Time Overcurrent Relay
The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
transformer (CVT) (>1kV) contact (a) 52 AC Circuit Breaker
TS1W 2-speed, 1-winding PROCESS ACTUATED SWITCHES - any errors or omissions shall be reported to Stantec without delay.
59 Overvoltage Relay The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
L Long-time I Instant. TS2W 2-speed, 2-winding 42M/b use for any purpose other than that authorized by Stantec is forbidden.
Combination motor starter S Short-time G Ground Normally closed auxiliary Temperature actuated switch 62 Time-delay Stopping or Opening Relay
T Thermostat Digital relay, meter, controller
or VFD Generic combination motor contact (b) (TS), normally open 63 Pressure switch (SP-sudden pressure or Legend
LSIG Moulded case circuit breaker VFD controller (FVC, FVNR, FVR, Buchholz relay, PR-pressure relief device)
COMMUNICATION /w electronic trip unit TS1W, TS2W, RVSS, VFD) Analog relay, meter, Temperature actuated switch 67 Directional Overcurrent Relay Existing Equipment
Overload relay (OL, 49M)
Reduce voltage soft starter controller (TS), normally closed 69 Permissive control device New Equipment
Enclosed circuit breaker
Telephone outlet (RVSS) /w internal bypass 71 Level switch
Moulded case circuit breaker NOTE: Number indicates quantity, Electronic O/L relay (49M), or
switch Pressure actuated switch (PS), 77 Telemetering relay
/w thermal magnetic trip unit polarity marks as shown. motor protection relay (11M),
normally open 79 Reclosing relay
Variable frequency drive current/voltage coil
Control station Combined telephone and 81 Frequency relay
(VFD) DISTRIBUTION CONTROL & TIME DELAY RELAYS
ethernet outlet Magnetic-only moulded case Pressure actuated switch (PS), 85 Pilot relay
circuit breaker, motor circuit normally closed 86 Lockout relay
Ann
MCP Automatic harmonic filter Control relay (CR)

protector (MCP) Panelboard (PB), lighting CR 87 Differential relay Notes
Line voltage switch EMERG.LIGHTING AND FIRE PROTECTION (AHF) panelboard (LP/LPL), distribution TIme-delay relay (TD)
Flow actuated switch (FS), 89 Line Switch
panelboard (DP/DPL)
~ Power converter, normally open 90 Voltage regulator
Ann Control or time-delay relay,
Moulded case switch, or AC/DC, AC/DC, DC/DC 94
M
Emergency/exit lighting normally open contact Tripping relay

moulded case circuit breaker = (AC ~, DC =) Flow actuated switch (FS), 97 Gas in oil relay
combination unit MCS
Manual motor starter (alternate) Motor control center (MCC)
~ Power converter, UPS, normally closed a Aux. contact, opened when main device
Control or time delay relay,
Ann = 2-inputs/1-output or, opened
MP
~
normally closed contact
1-input/2-outputs Level actuated switch, b Aux. contact, closed when main device
Manual motor starter Emergency luminaire Disconnect switch (<1kV) INSTRUMENTATION
Float (LS), normally open opened
c/w pilot light On-time-delay relay, normally A Alternate, Auto
LOADS, SOURCES
open contact, timed closed
COMMUNICATION NODE Level actuated switch, ATS Automatic transfer switch
P
Induction motor (M), (MOTOR O/L,VFD,RVSS,INTRUMENT) Float (LS), normally closed ATC Automatic transfer switch controller
Smoke alarm Fused disconnect switch X.Y.Z.W2 On-time-delay relay, normally
Switch c/w pilot light M Synchronous motor (S), B Bus, bypass
(<1kV) closed contact, timed open
Generator (G) Limit actuated switch (ZS), BF Breaker failure
C
120Vac normally open BL Block
LIGHTING INSTRUMENTATION TRANSMITTER Off-time-delay relay, normally
Unit heater (UH) mA C Contactor
4-WIRE DEVICE open contact, timed open
JBX Junction box A:nn Limit actuated switch (ZS), CB Circuit breaker
Surface mount or Isolation switch (>1kV) CL Close
normally closed
suspended luminaire Off-time-delay relay, normally CLS Closed limit switch
Generic Equipment
closed contact, timed closed CM
NOTE: All process actuated switches Customer multi-function power meter
Lighting/ panel board Isolation switch (>1kV), mA 2-WIRE TRANSMITTER
CPL Control panel
change state on a rising or
Ann grounded in open position 10K
M Power actuated valve Potentiometer end of the process condition. CPP Control power panel
A:nn A Wall mount luminaire CS Control switch/station, circuit switcher
DS Disconnect switch
Duplex receptacle Motorized isolation switch + PUSH BUTTONS PLC, CONTROLLERS I/Os
Battery TSL INSTRUMENTATION ELEMENT DFR Disturbance fault recorder Revision By Appd YYYY.MM.DD
Ann M
(>1kV) xx DI Discrete inputs ES Emergency stop
- Momentary push-button,
A:nn Recessed mount luminaire DI AI Analog inputs FU Fuse
normally open contact
PI Pulse inputs
Fourplex receptacle TRANSFORMERS, REACTORS, CAPCITORS G Ground, Generator
Grouding switch (>1kV) DO Discrete outputs GC Generator controller
Momentary push button,
DO AO Analog outputs GEO Generator-end-open
A:nn Power transformer (T) normally closed contact B For Review ML/DM SSS 2021.12.03
Ceiling mount or PO Pulse outputs
Special purpose plug & HH Handhole A For Review ML/DM SSS 2021.09.20
receptacle suspended strip luminaire
Maintained push button, PLC discrete relay output, ICP Instrumentation panel Issued By Appd YYYY.MM.DD
disconnect rated Loadbreak switch (>1kV) Power transformer (T) IS
normally open contact normally open Isolation switch
w/ load tap changer (LTC) JB(X) Junction box File Name: 165620209-E001 ML/DM SSS SSS 2020.07.15
Recessed mount strip
FIELDBUS NETWORK COMPONENTS Maintained push button, PLC discrete relay output, L Line, Lower, Local Dwn. Dsgn. Chkd. YYYY.MM.DD
luminaire
Loadbreak switch (>1kV), DeviceNet T-connector, normally closed contact normally closed LBS Load-break switch
STREET LIGHTING Autotransformer (AT)
grounded in open position M F male/female trunk & female LEO Line-end-open Permit/Seal
drop connection SELECTOR SWITCHES TERMINALS, TEST BLOCKS LTC Load Tap Changer
Wall mount strip luminaire F
M Motor, Manual
Utility pole Grounding transformer (GT) DeviceNet powertap, L R Feed-through terminal blocks
X0 Two-position selector switch, MH Manhole
Fused loadbreak switch M F shaded connection indicates (shape and hatch indicates
Delta winding normally open contact
B (>1kV) power only location) MOC Mechanism-operated auxiliary switch
F
N Neutral
A: Lighting Panel Tag Wye grounded winding DeviceNet terminating L R Two-positionselector switch, Terminal blocks in
X0 O Over
Control cabinet assembly M
REACTORS, CAPACITORS, RESISTORS resistor, male connector normally closed contact MCC/Control Panel
nn: Circuit Number O/H Overhead
O Terminal blocks in Local OLS Opened limit switch
Fuse cut-out (>1kV) H A Three-positionselector switch,
X00 Control Station OP Open
Capacitor
normally open contact
Handhole TAGGING CABLES NOMENCLATURE Terminal block in PLC/SCADA P Phase
O Control Panel PB Push-button
Fuse (FU) H A Three-positionselector switch,
X00 PB(X) Pull box
Inductor / reactor 3C#500 Three-conductor cable, Client/Project Logo
J
TAG-xxx Electrical equipment tag (letter indicates class/type) normally closed contact Grounding terminal block
Pole mounted luminaire 500kcmil size; PLC Programmable logic controller
(Single-Head/Double head) TAG-xxx 2-4#4/0 Two runs of four CONTACT INDICATION POT Potentiometer
single-conductor cables, X Closed contact Disconnect terminal block, or Q Negative sequence, oil
Disconnect-rated plug & De-tuned capacitor bank, #4/0AWG size; 0 Open contact potential FT switch
Instrumentation equipment receptacle single-tuned harmonic filter QC Reactive power controller
TAG-xxx 3#12 Three single-conductor Shorting terminal block, or
tag R Remote, Raise
TAG-xxx 52/a cables, #12AWG size POSITION TAG current shorting FT switch RC Remote close
Breaker/switch normally open 2P#18 Two-pair cable, #18AWG F/O/R Forward / Off / Reverse
auxiliary contact (a) size F/O/S Fast/Off / Slow RM Revenue metering (1-main, 2-alternate)
dV/dt filter (RL filter) Fused terminal block
2-1P#16 Two runs of single-pair F/R Forward / Reverse RO Remote open
LINE TYPES MISCELLANEOUS 52/b cables, #16AWG size F/S Fast / Slow RPU Remote programmable unit
Breaker/switch normally Supplementary circuit
closed auxiliary contact (b) 1T#16 One-triad cable, #16AWG O/O/C Open / OFF / Close RT Remote trip Client/Project
New Power Wiring Resistor breakers, DIN rail mounted
size O/C Open / Close RTU Remote terminal unit
Existing Power Wiring # Revision triangle H/O/A Hand / Off / Auto SCADA System control and data acquisition
The Coorporation of the
MISCELLANEOUS Potential FT switch
Field Power Wiring L/R Local / Remote SCP SCADA control panel Town of Amherstburg
O/O On / Off
New Control Wiring Grounding, bonding Current non-shorting FT switch SP Stop
Existing Control Wiring SUPPRESSORS, ARRESTERS /w test jack ST Start Amherstburg WTP Electrical &
# Keynote
T SCADA Upgrades
Field Control Wiring Transformer

Surge protective device Current shorting FT switch TR Trip
New Comm. Wiring
(SPD), surge suppressor TB(X) Terminal Box 415 Front Rd N., Amherstburg, ON, N9V 2V5
A Existing Comm. Wiring
PLC I/O TERMINALS TT Transfer trip
Field Comm. Wiring TTR Transfer trip received Title
Surge arrester (>1kV)
Ground/Bonding TTS Transfer trip sent
Fused terminal block
TOC Truck-operated auxiliary switch Electrical
Electrical Removals
Circuit breaker terminal block
U Under Legend & Abbreviations
U/G Underground
Disconnect terminal block

Project No. Scale
165620209
2022.05.03 11:13:45 AM
Feed-through terminal block

Revision Sheet Drawing No.
SH Grounding terminal block

of
E-001
1 2 3 4 5
Stantec Consulting Ltd.

171 Queens Avenue, 6th Floor
London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Contractor Scope of Work
Copyright Reserved
D The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
1. Contractor to install and/or supply the following, prior to Hydro - any errors or omissions shall be reported to Stantec without delay.
The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
completing their work, refer to Detail D on E-102.
use for any purpose other than that authorized by Stantec is forbidden.
1.1. Provide transformer Vault. Refer to Detail E on E-102.
1.2. Provide transformer primary grounding. Refer to Detail F on
Legend
E-102. Electrical Proposed
1.3. Provide primary underground electrical ductbank Electrical Removals
between transformer and new hydro dip pole (WL-1). This Existing
work is to be completed after Hydro One has installed new
HP hydro dip pole (WL-1). Refer to Detail B on E-102.
1.4. Provide primary service cables between transformer and
new hydro dip pole (WL-1). Sufficient cable is to be left on
each end for Hydro to make final connections.
OH
1.5. Provide primary riser, guards and straps as per Hydro One
request. Refer to Detail D on E-102. Notes
1.6. Provide secondary service underground ductbank
between transformer and existing building. Refer to Detail
C on E-102.
OH
CLARIFIER
AREA 1.7. Provide secondary service cable between new
transformer and switchboard SWB-1. Sufficient cable is to
be left in the transformer vault for Hydro One to make final
connections. Terminate cables on the switchboard prior to
OH
hydro's final connections.

1.8. Provide system grounding consisting of three 3m-19mmØ
copper clad ground rods installed 300mm below grade in a
triangle, spaced 3m apart, interconnected /w #2/0AWG
bare copper conductor, and grounding conductor to be
OH
GARAGE
connected to switchboard SWB-1 with one continuous
AREA insulated #2/0AWG, installed in the PVC-27 conduit inside
C
the plant.
1.9. ESA inspection once all work has been completed and
OH
prior to hydro making all final connections.

HP
COUN
Hydro One Scope of Work

TY R
OH
2. Hydro One is to install and/or supply the following, after

ADMIN/CHEMICAL
contractor has completed their work:
OAD
AREA
FILTER 2.1. New 750kVA, 27.6Y/16kV-600Y/347V, 3phase Padmounted
AREA Transformer after contractor has installed transformer vault.
NORT
Revision By Appd YYYY.MM.DD

20 (
OH
2.2. New dip pole WL-1 and ground at the pole

2.3. Run customer cable up the pole, make all final termination
H)
FRON
on the pole.
2.4. Make all final primary and secondary terminations at the
C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
Transformer.
OH
T
B For Review ML/DM SSS 2021.12.03

2.5. New meter base, current and voltage transformers in
STRE
A For Review ML/DM SSS 2021.09.20

metering cabinet, all wiring between meter and metering Issued By Appd YYYY.MM.DD
cabinet.
ET
OH
File Name: 165620209-E101 ML/DM SSS SSS 2020.07.15

HIGH LIFT Contractor Removals Dwn. Dsgn. Chkd. YYYY.MM.DD
AREA
3. After new system has been commissioned and old system has Permit/Seal
OH
1.8 SYSTEM been decommissioned. Remove the following:

GROUND 3.1. Existing overhead line
3.2. Existing pole.
B
3.3. Existing substation. Including but not limited to H-frame
OH
structure, transformer, transformer concrete pad, electrical

1.6 2xPVC-129 ductbank to building and fence surrounding substation.
Once everything has been removed a 300mm BFG surface
LOW LIFT layer is to be removed and finished with native soil and sod.
1.1 AREA 3.4. Existing Primary Metering Equipment (PME) is to removed and
OH
returned to hydro one.

1.3 2xPVC-129 TX-1
Client/Project Logo
WL-1
OH
TX-1
H-FRAME
OH
EX.HP SERVICE SUBSTATION 3.3
1.2
OH
OH
GROUND
OH
OH
OH
Client/Project
OH
OH
OH EXISTING OVERHEAD Town of Amherstburg
OH
3.1
HYDRO LINE
OH
Amherstburg WTP Electrical &
OH
EXISTING OVERHEAD SCADA Upgrades

3.1
HYDRO LINE HP 3.2
415 Front Rd N., Amherstburg, ON, N9V 2V5
A
OH
Title
Electrical
OH
Site Plan
Project No. Scale

OH
165620209 1:250
2022.05.03 1:38:37 PM
A SUBSTATION ELEVATION B PRIMARY SERVICE ELEVATION

NTS
NTS

of
E-101
1 2 3 4 5
Sod/Grass Concrete
Notes: Legend
Granular A Undisturbed soil 1. Transition conduits to 1000mm BFG with 1-1.5m from Backfill
the vault Bedding
Undistributed native material

Low Voltage
N High Voltage
Dead Front Dead Front
Finished Grade Finished Grade Stantec Consulting Ltd.

to PLANT 171 Queens Avenue, 6th Floor
London ON N6A 5J7
Tel: 519.645.2007
513
513
www.stantec.com
3xPVC-129
Copyright Reserved
206
843
843
E-102
D
943
943
1000
1000
2xPVC-129 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
148
B - any errors or omissions shall be reported to Stantec without delay.
1050
1050
1880 Warning tape Warning tape The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
Transformer 470 660
Vault Legend
100
100
1200
190 75 190 190 75
860
860
TX-1
to HYDRO POLE
1576
1370
1
290
290
Primary Secondary
Service Open Bottom Service 1
Base
75
75
1880
1880
Transformer vault
opening 1880
E-102
B 3000
B CROSS SECTION C CROSS SECTION Notes
1:16 1:16
Notes
1. All dimensions are in millimeters unless otherwise noted.
TOP VIEW FRONT VIEW SIDE VIEW
2. Bedding shall be sand, unless native is suitable. Compact to 95% SPD.
3. Place and compact native backfill, screened where particle size exceeds 26.5mm material free of debris, sharp,
organic, or frozen material. Install back fill in lifts of 150mm compacted to 90% SPD, 95% SPD in vehicular areas.
4. Where native soil is not suitable for backfill, supply granular 'A' material.
MAIN TRANSFORMER & VAULT 5. Provide warning tape 75mm wide, reading "CAUTION: BURIED ELECTRIC LINE BELOW". Brady Identonline or
approved equal.
A DETAIL
6. In sodden areas, supply and place 150mm of topsoil; sod or seed as indicated on the drawings. In vehicular
C areas, supply, place and compact granular sub-base / base / surface material to match existing conditions.
7. All materials are to be PVC unless noted.

Issued By Appd YYYY.MM.DD

Dwn. Dsgn. Chkd. YYYY.MM.DD
Permit/Seal
Client/Project Logo
Client/Project
Town of Amherstburg
HYDRO ONE STANDARD HYDRO ONE STANDARD SCADA Upgrades
HYDRO ONE PARTIAL 750KVA TRANSFORMER VAULT TRANSFORMER GROUNDING

A D SERVICE CONTRACT PLAN E DETAIL F DETAIL
Title
Site Plan Details
Project No. Scale

165620209 1:250
2022.05.03 1:38:47 PM

of
E-102
1 2 3 4 5
Matchline E
For continuation
N
see drawing E-116 Matchline B
For continuation
see drawing ED-112

to AE-2/AIT-6 171 Queens Avenue, 6th Floor
UM-SPS1 London ON N6A 5J7
HLS-C4 2 HLS-2 2 Tel: 519.645.2007
DP IAC-1 www.stantec.com
FE/PDT-8 Copyright Reserved

IAC-1/DS
- any errors or omissions shall be reported to Stantec without delay.
HLS-6 2 use for any purpose other than that authorized by Stantec is forbidden.
to distribution
M
valve chamber 5 IAC-2 Legend
5 FE-9 Existing
Electrical Removals
ceiling IAC-2/DS
5 FIT-9 PIT-8 5 opening SCADA Removals
T UH-5 3 Existing Equipment
REC-2
7
IAC-3/DS
Notes
RW-C1 2
TX-B IAC-3
7
BASEMENT FLOOR
ELEV. 586.00
M
FE-1
FT-10 5
C
A INSTRUMENT REMOVAL
FIT-1 5 TYP. LI/LT-10, LI/LT-12. LDI/LTD-11

Existing cable tray

AIT-1 UPS-1 8 B For Review ML/DM SSS 2021.12.03
5 A For Review ML/DM SSS 2021.09.20
AE-1
File Name: 165620209-ED111 ML/DM SSS SSS 2020.07.15

BSP-2 Permit/Seal
to AIT-1
& AIT-8
REC-3
T UH-4 3
to WETWEL HS/LL-1
B LI-12
4 HS/LL-2 1
HS/LL-3 LT-12
SD-3 2
LLD-1 2 LLDC-1
BSP-1
LL-1 Client/Project Logo

TSV-1
LDT-11
1 S
LDI-11 To service
TS-1
water
to INLET
LLD-2 2 LLDC-2
CRIB HS/TS-1 4 WETWELL
LL-2 BELOW
SCREEN WELL Notes

BELOW 1. Remove instrumentation complete, including but not limited Client/Project
to, all conduits, control wiring, pneumatic tubing, auxiliary
SI-2 2 equipment, from source to the existing General Control
Existing cable tray LLD-3 2 LLDC-3
mounted at 4000mm
Panel GCP-1. Applicable to: LT/LI-10, LT/LI-11, LT/LI-12 Town of Amherstburg
2. Remove control wiring/conduit to GCP-1 complete for the
LL-3 following valves and gates: IG-1, BS-1, SI-2, SB-4, SD-3, LLD-1, Amherstburg WTP Electrical &
LLD-2, LLD-3, HLS-2, HLS-6, HLS-C4, RW-C1.
\\cd1223-f01\01656\active\165620209\design\drawing\electrical\165620209-ed111
SCADA Upgrades
BS-1 2 3. Remove existing unit heater and thermostat to MCC-1
from SB-4 2 complete including all power and control wiring. Applicable 415 Front Rd N., Amherstburg, ON, N9V 2V5
A DETROIT IG-1 2 INLET WELL to UH-4, UH-6
RIVER BELOW 4. Remove control station to MCC-1 complete, including all
control wiring/conduit.
Title
LI-10
5. Remove instrumentation wiring/conduit to GCP-1 complete. Low Lift and Basement Plan Removals
1 LOW LIFT AREA Maintain existing instrumentation. Applicable to: AIT/AE-1,
LT-10 ELEV. 580.00
FIT-1, FT-10, FIT-9, PIT-9, FE-9, FE/PDT-8. Elevation 580.00
6. Once existing main cables have been removed, parge and
6 seal openings water-tight to match existing surface.
7. Remove power wiring and conduit complete for lighting Project No. Scale
0 500 1500 2500mm
panel transformer B and welding receptacle. 165620209
2022.05.03 11:14:16 AM
1:50
8. Remove UPS-1, maintain existing receptacle.

of
ED-111
1 2 3 4 5
N
Matchline C
For continuation
see drawing E-117 Stantec Consulting Ltd.
London ON N6A 5J7
9
to wash JBX-AC1 Tel: 519.645.2007
www.stantec.com
water drain
Copyright Reserved
CLEAR
Existing cable tray
WATER WELL 1 Legend
BELOW Matchline D
Electrical Removals
For continuation
see drawing ED-113 SCADA Removals
Existing Equipment
AR-6
HIGH LIFT AREA
WWD-6 5 A ATS, MAIN & MTS REMOVALS
Existing WWDC-6
8 MH-2/DS 4 ELEV. 597.50
7 NTS.
cable tray WW-6
5 HLW-1
Notes
VFD/HL-1 1
VFD/HL-2 1
VFD/HL-3 1
Matchline B
For continuation
Existing cable tray
see drawing ED-111
1 HLW-1 5
1 1
C
RB-6
VFD/LL-2
VFD/LL-3
VFD/LL-1
Existing
cable tray 4
HLD-1 5 5
HLDC-1
LP-A 2
LP-B HLD-2 5
2 AR-1
Existing 2 LP-C HLDC-2

4 HL-1
cable tray
1 1 B MCC-1 REMOVALS By Appd YYYY.MM.DD
3 NTS.
Revision
MCC-1
MCC-1
SAC-1
SAC-1/DS AR-2

HLDC-3 A For Review ML/DM SSS 2021.09.20
5 HLD-3 HL-2
GENERATOR Issued By Appd YYYY.MM.DD
ROOM
R-10 5
3
AR-3
Permit/Seal
HL-3
MTS
1
B
3
MAIN
1 to AE/AIT-11
TX-G BSP-5
Gen. ventilation
LP-G
control panel
ATS
1
CLEAR
WATER WELL 2
BELOW
Client/Project Logo
HIGH LIFT VFDs LOW LIFT VFDs

C REMOVALS D REMOVALS
NTS. NTS.
AH-1
CWI-5
AH-2 5 Notes
1. Refer to sequencing of scope for removal/installation of Client/Project
Main breaker, MTS, ATS, MCC1 and VFDs. Ensure all
REC-1 6
wiring/conduits are removed complete. The Coorporation of the
2. Maintain lighting panel field wiring for LP-A, LP-B & LP-C. Town of Amherstburg
Label all circuit wiring prior to removing lighting panels. All
wiring is to be pulled back and made safe. Amherstburg WTP Electrical &
3. Remove pump power cables in its entirety to high lift pumps. SCADA Upgrades
All standard are to be followed to ensure water in clearwell is
not contaminated. Once cables have been removed seal 415 Front Rd N., Amherstburg, ON, N9V 2V5
A openings water tight with non shrink grout, surface finish to
match existing.
4. Once VFDs and wiring have been removed, remove cable Title
tray complete.
High Lift Plan Removals
following valves and gates: HLW-1, HLD-1, HLD-2, HLD-3, RB-6, Elevation 597.50
R-10, CWI-5, WWD-6.
6. Remove receptacle, disconnect, power wiring/conduit
complete.
Project No. Scale
0 500 1500 2500mm
7. Remove power cable to wash water pump WW-1 complete.
165620209
2022.05.03 11:14:30 AM
1:50
8. Remove Hoist disconnect. Maintain existing wiring.
9. Remove AC-1 power wiring back to existing MCC from Revision Sheet Drawing No.
of
ED-112
existing junction box

1 2 3 4 5
Matchline 'D'
from Clarifier
by-pass
Drawing E-117
for continuation N

2 FCI-C9 (at riser) 171 Queens Avenue, 6th Floor
2 CLB-C5 London ON N6A 5J7
FILTER INFLUENT CHANNEL Tel: 519.645.2007
www.stantec.com
Copyright Reserved
FIB-C8
AE-1/AIT-6
to
BSP-3
Legend
Electrical Removals
2 FJW-C9 (at riser) FJW-C10 (at riser) 2 2 FJW-C11 (at riser) FJW-C12 (at riser) 2
SCADA Removals
TBX1-2 TBX2-2 TBX3-2 TBX4-2
Existing Equipment
2 FMW-C3 (at riser) FMW-C4 (at riser) 2

2 FMW-C1 (at riser) FMW-C2 (at riser) 2
JBX-3
JBX-4
JBX-1
JBX-2
5 5 5
FE-C1 2 2 FE-C2 FE-C3 2 2 FE-C4 Notes
5
Existing cable tray
Matchline 'D'
for continuation
see drawing
ED-112 & ED-113
FILTER F-1 FILTER F-2 FILTER F-3 FILTER F-4
C
PDIT-1 PDIT-2 PI-6 PI-7 PDIT-3 PDIT-4
FD-C6 (at riser) 2 FD-C8 (at riser) 2

2 FD-C5 (at riser) 2 FD-C7 (at riser)
FE-5
FE-2
FE-4
FE-3
M
M
to AIT-9 &
AIT-10 By Appd YYYY.MM.DD
Revision
BSP-4
PIPE GALLERY
Existing cable tray FF. ELEV. 597.50
FE-6 C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
M A For Review ML/DM SSS 2021.09.20
FJW-C13 FMW-C14 2
FE-7 FE-C5 2 FE-C6 2 FE-C7 2 FE-C8 2 Issued By Appd YYYY.MM.DD
2
HLW-1 DP AH-3
6 TBX4-3 UPS-3 4 ML/DM SSS SSS 2020.07.15
UPS-2 4 File Name: 165620209-ED113
6 TBX1-3 Dwn. Dsgn. Chkd. YYYY.MM.DD
FI-7 AE-4 AE-5

PI-18 (tbc) Permit/Seal
FT-7 AE-2 AE-3 AY-4 AY-5
LT-14
AY-2 AY-3 3 LIT-14 FIT-4
3 FIT-7 LI-14 AIT-4/5 3
AT-2/3 3 FIT-5
FI-6
FIT-2
B FT-6
FIT-3
3 FIT-6
Client/Project Logo
Client/Project
Notes
Town of Amherstburg
1. Remove instrumentation complete, including but not limited
to, all conduits, control wiring, pneumatic tubing, auxiliary Amherstburg WTP Electrical &
equipment, from source to the existing General Control
Panel GCP-1. Applicable to: PI-18, FT/FI-7, FT/FI-6, LT/LI-14, SCADA Upgrades
following valves and gates: Applicable to: FCI-C9, CLB-C5,
A FE-C1, FE-C2, FE-C3, FE-C4, FD-C5, FD-C6, FD-C7, FD-C8,
FJW-C9, FJW-C10, FJW-C11, FJW-C12, FMW-C1, FMW-C2, Title
FMW-C3, FMW-C4, FE-C5, FE-C6, FE-C7, FE-C8, FJW-C13,
FJW-C14. Maintain local junctions box. Filter Pipe Gallery Plan Removals
3. Remove instrumentation wiring/conduit to GCP-1 complete.
Maintain existing instrumentation. Applicable to: FIT-6, FIT-7, Elevation 597.50
AT-2/3, AIT-4/5, PDIT-1, PDIT-2, PDIT-3, PDIT-4, LIT-14.
UPS & INSTRUMENTATION REMOVAL UPS REMOVAL INSTRUMENTATION REMOVAL 4. Remove UPS-2 and UPS-3, maintain existing receptacle.
A B C 5. Remove junction boxes JBX-1, JBX-2 JBX-3 and JBX-4. Project No. Scale
0 500 1500 2500mm
NTS NTS TYP. LI/LT-14, PI/PT-7, FI/FT-6 Remove all associated wiring including but not limited to 165620209
2022.05.03 11:14:43 AM
1:50
wiring to/from GCP/FCP panels, and valves/instrumentation.
6. Remove terminal boxes TBX1-3, and TBX4-3. Remove all Revision Sheet Drawing No.

associated wiring including but not limited to wiring to/from
GCP/FCP panels, and valves/instrumentation.
of
ED-113
1 2 3 4 5
N
London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
EF-3/MD LP-A1 3 GMCP 4 Matchline 'D' Copyright Reserved

D EF-3 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
For continuation
see drawing ED-113 - any errors or omissions shall be reported to Stantec without delay.
CSH-1
CF-1 Legend
CHEMICAL CMP-1/2/VFD CF-1/VFD
2 Electrical Removals
FEED
CSH-1/CS
ROOM SCADA Removals
FILTER
POLYMER CSH-1/DS Existing Equipment
CMP-5/6/VFD 2 TANK
MX-1 CMP-6
M
CMP-3
CMP-5
2 Notes
CMP-4 CARBON
CMP-3/4/VFD
CLARIFIER 1 ROOM
POLYMER
CMP-1
CMP-2
TANK
LIT-8
MSP-1 AE/AIT-13
CHL-1/FI CHL-4/FI
CHL-1/FC CHL-4/FC
JANITOR Fluoride station
C CHLORINE Chlorinator 1 Chlorinator 4 CLOSET not functional
ROOM
CHL-2/FI CHL-3/FI
CHL-2/FC CHL-3/FC
Chlorinator 2 Chlorinator 3
MH-1/DS
EF-3/CS LP-SC
Matchline C
For continuation
see drawing ED-112


Permit/Seal
Client/Project Logo
Client/Project
Town of Amherstburg
A GMCP & LP-A1 REMOVAL
NTS
SCADA Upgrades
A
Notes
1. Remove instrumentation complete, including but not limited Title
Chlorine/Chemical Rm. Plan Removal
Panel GCP-1. Applicable to: LIT-8
Elevation 597.50
2. Remove VFD panel, power/control wiring and conduit to
GCP-1 complete for chemical pumps CMP-1, 2, 3, 4, 5, 6
3. Remove lighting panel. Maintain existing wiring. Before
removal of lighting panel ensure all existing circuits are Project No. Scale
0 500 1500 2500mm
labeled and made safe when disconnected. 165620209
2022.05.03 11:14:51 AM
1:50
4. Remove general motor control panel GMCP. All power and
control wiring/conduits are to be removed complete to

each of the five (5) loads not in use, and one (1) load in use
(CE-1).
of
ED-117
1 2 3 4 5
For continuation
see drawing E-116
London ON N6A 5J7
Tel: 519.645.2007
to AE-2/AIT-6 www.stantec.com
UM-SPS1 10
HLS-C4 HLS-2 Copyright Reserved
D DP IAC-1 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
FE/PDT-8 3 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
CT1-7 IAC-1/DS use for any purpose other than that authorized by Stantec is forbidden.
300mm Legend
HLS-6 Electrical Proposed
to distribution
M
valve chamber 5 IAC-2 SCADA Proposed
FE-9 Existing
ceiling IAC-2/DS Existing Equipment
6 FIT-9 PIT-8 6 opening

UH-2 7
11 TX-B TX-A 11 CT1-6

Notes
8.3 8
IAC-3/DS
450mm
RW-C1
2 IAC-3
BASEMENT FLOOR 9
ELEV. 586.00
M
FE-1
FT-10 6 9
3xPVC-103
12
1xPVC-21
FIT-1 6
Existing cable tray

2 Issued By Appd YYYY.MM.DD

SCP-2
AIT-1
6
AE-1 File Name: 165620209-E111 ML/DM SSS SSS 2020.07.15
1
UPS-2 Permit/Seal
BSP-2
to AIT-1
B & AIT-8 Notes
REC-3 LIT-11 1. Core drill through foundation wall at 900mm below grade.
UH-1 7 5
LE-11 Seal openings weather tight as required once all conduit
to WETWEL and cables have been installed.
2. Provide new control wiring to each valve/gate, cables are
to be routed on new/existing cable tray to SCP-2.
SD-3 Applicable for: RW-C1.
3. Provide new power/control wiring to air compressors. Cables
are to be fed through existing ceiling openings and routed
LLD-1 LLDC-1 on proposed cable tray to each air compressor. Secure Client/Project Logo
BSP-1 cables to wall or ceiling as required.
LE-11B 4. Provide new power cables to low lift pumps. Feed cables
5 LL-1 4
LDIT-11 TSV-1 through existing ceiling opening from VFDs. Route cables on
LE-11A 8.4 CT1-5 existing/proposed cable trays to each pump.
TS-1/DS
S
300mm
To service 5. Provide new instrumentation and wiring as indicated. Route
TS-1 new cable in existing/proposed cable tray to SCP-2.
water
Applicable to: LIT-10, LIT-11, LDIT-11
to INLET
LLD-2 LLDC-2 6. Provide new instrumentation wiring, route new cable in
CRIB
WETWELL existing/proposed cable tray to SCP-2. Applicable to:
LL-2 4 BELOW AIT/AE-1, FIT-1, FT-10, FIT-9, PIT-9, FE-9, FE/PDT-8.
Client/Project
8.4 CT1-4 7. Provide new power wiring to unit heaters with integrated
SCREEN WELL thermostat, and disconnect. Route cables on existing cable The Coorporation of the
BELOW tray and open conduit as required. Town of Amherstburg
300mm
8. Cable tray:
8.2 CT1-1
SI-2
Existing cable tray LLD-3 LLDC-3 8.1. Cable trays are to be Galvanized Steel ladder type, CSA Amherstburg WTP Electrical &
mounted at 4000mm D rated. Secure to ceiling at a min. every 3000mm. SCADA Upgrades
8.2. Installation height: 4000mm AFF.

LL-3 4
300mm 8.3. Installation height: 3000mm AFF. 415 Front Rd N., Amherstburg, ON, N9V 2V5
8.4 CT1-3
300mm
A 8.4. Vertical cable trays CT1-4,5,6 are to be secured to floor

BS-1
from SB-4 with unitrut, secure top of cable tray to CT1-3 ceiling Title
supports.
DETROIT
RIVER
IG-1 INLET WELL 8.5. Provide metal barrier to separate power and Low Lift and Basement Plan Proposed
BELOW CT1-2 8.3 8.4 control/instrumentation cables.
9. High lift pump cable tray and openings, see E112 for more
Elevation 580.00
LE-10 LOW LIFT AREA details.
5
LIT-10 ELEV. 580.00 10. Communication cable opening for SCP-2, see E112 for more
details. Field route cable in open conduit to SCP-2. Project No. Scale
0 500 1500 2500mm
165620209
2022.05.03 11:15:01 AM
11. Install transformers at 3000mm AFF. To be secured with 1:50

unistrut support to foundation wall as required.
12. Rigid PVC conduit to be supported by unistrut support from

ceiling every 1500mm. of
E-111
1 2 3 4 5
Matchline C Stantec Consulting Ltd.

For continuation
London ON N6A 5J7
see drawing E-117 Tel: 519.645.2007
www.stantec.com
to wash JBX-AC1 9 Copyright Reserved

D water drain The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
Legend
CLEAR Electrical Proposed
WATER WELL 1
5 Existing cable tray BELOW SCADA Proposed
Matchline D
For continuation Existing Equipment
see drawing E-113
AR-6
MH-2/C WWD-6 6
HIGH LIFT AREA WWDC-6
ELEV. 597.50
5 WW-6 Notes
6 HLW-1
8
SCP-1 & COM-2
In control room
above
CT2-1
C 8
5 Existing cable tray
HLW-1 6
RB-6
HLD-1 6
HLDC-1
MCC-1
LP-A
HLD-2 6
AR-1
LP-B
HLDC-2
HL-1
SAC-1 4
SAC-1/DS AR-2 C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
LL-1
LL-2
LL-3 HLDC-3
6 HLD-3 HL-2 ML/DM SSS SSS 2020.07.15
GENERATOR File Name: 165620209-E112
VFDs
HL-1 Dwn. Dsgn. Chkd. YYYY.MM.DD
ROOM
R-10 6
HL-2
4 Permit/Seal
HL-3 AR-3
Notes
B WW-6 1. New MCC to be installed in same location as existing with
HL-3 reference to LP-A, LP-B and LP-C.
DIST 2. Only 600V feeders and motor controllers are being replaced
c/w cables, and 208Y/120V lighting panels, but not 120V
cables.
4
to AE/AIT-11 3. Electrical upgrades to be staged such that new service
SWB-1
entrance switchboard be installed first where temporary
TX-G ATS BSP-5 shutdown is required to power reminder of MCC-1 from the
Gen. ventilation
LP-G generator. After new switchboard is installed, free standing
control panel Client/Project Logo
VFDs can be installed one at the time. Last major shutdown is
CLEAR
required to replace reminder of MCC lineup.
WATER WELL 2
BELOW 4. Core drill as required, seal openings once cables have been
MAIN
installed. Route high lift pump power cables through existing
floor opening below VFDs. Cables are to be installed in new
AH-1/DS
cable tray in basement and up through each new opening

AHF-1 as indicated. Cables to be laid flat on floor, provide steel
cover for protection.
5. Power cable for wash water pump WW-6 is to be routed
7
AH-1 through existing floor openings below VFDs. Install cable in
existing tray in basement. Route cable back up through
Client/Project
CWI-5
6 opening, onto existing vertical tray in high lift area. Route
AH-2
cable through existing tray, drop cable down above WW-6 The Coorporation of the
and secure to wall or ceiling as required.
H1-ITE 10 Town of Amherstburg
6. Control cables are to be routed in open conduit, at 300mm
AH-2/DS 7 aff., secure conduits with unistrut to floor or wall as required. Amherstburg WTP Electrical &
Continue to route cables on CT2-1 up to SCP-1 in control
SCADA Upgrades
room. Applicable to: CWI-5, R-10, RB-6, HLD-1, HLD-2, HLD-3,

HLW-1, WWD-6
7. Power cable for existing area heating fans units to be 415 Front Rd N., Amherstburg, ON, N9V 2V5
A installed in conduit between new disconnect and MCC-1.
Field route conduits and secure to wall or ceiling as required.
Title
Applicable to: AH-1, AH-2.
8. Communication cables from PP-1, located in basement (see High Lift Plan Proposed
drawing E111), are to be in conduit PVC-51. Surface mount
conduit to column, up to proposed communication panel Elevation 597.50
COM-2. Seal all conduit openings once conduits have been
installed.
9. Provide new power wiring to AC-1 on roof (see drawing Project No. Scale
0 500 1500 2500mm
E-115). Splice new cables in junction box.
165620209
2022.05.03 11:15:15 AM
1:50
10. Supply and install PVC-31 conduit between Hydro One
Instrument Transformer Enclosure (H1-ITE) to Revenue Revision Sheet Drawing No.
Metering Compartment in Switchboard. Field route as

required at Basement Floor level.
of
E-112
1 2 3 4 5

Matchline 'D' 171 Queens Avenue, 6th Floor
from Clarifier Drawing E-117 London ON N6A 5J7
by-pass for continuation Tel: 519.645.2007
www.stantec.com
Copyright Reserved
2 CLB-C5 2 FCI-C9 (at riser)
FILTER INFLUENT CHANNEL Legend
5 Electrical Proposed
5
SCADA Proposed
1
Existing Equipment
FIB-C8
4 TBX1 6
AE-1/AIT-6
to
BSP-3
TBX2
TBX3
2 FJW-C9 (at riser) FJW-C10 (at riser) 2 2 FJW-C11 (at riser) FJW-C12 (at riser) 2
Notes
TBX1-2 TBX2-2 TBX3-2 TBX4-2
FMW-C3 (at riser) FMW-C4 (at riser) 2

2 FMW-C1 (at riser) FMW-C2 (at riser) 2 2
FE-C1 2 2 FE-C2 FE-C3 2 2 FE-C4
Provide open Provide open

conduit as required conduit as required
C
Existing cable tray
Matchline 'D'
for continuation
see drawing
E-112 & E-113 FILTER F-1 FILTER F-2 FILTER F-3 FILTER F-4
1 1
1 300mm 300mm
PDIT-1 PI-6 PI-7 PDIT-3 Revision By Appd YYYY.MM.DD
PDIT-2 PDIT-4
CT3-3 CT3-4
FD-C6 (at riser) 3 FD-C8 (at riser) 3

3 FD-C5 (at riser) 5
3 FD-C7 (at riser) C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
FE-5
FE-2
FE-4
FE-3
M
M
to AIT-9 & A For Review ML/DM SSS 2021.09.20
AIT-10 Issued By Appd YYYY.MM.DD
CT3-5
BSP-4
PIPE GALLERY
Existing cable tray FF. ELEV. 597.50
FE-6
Permit/Seal
3 M Provide open conduit as required
FJW-C13 FMW-C14 3
FE-7 FE-C5 3 FE-C6 3 FE-C7 3 FE-C8 3
HLW-1 CT3-1 AH-3 CT3-2
DP SCP-3 SCP-4
B
300mm 300mm
AE-4 AE-5
UPS-3 UPS-4 AY-4
8 AE-2 AE-3 8 AY-5
AY-2 AY-3 LIT-14 FIT-4
6 FIT-7 AIT-4/5 6
AT-2/3 OIT-1 FIT-5
6 FIT-2
FIT-3 Client/Project Logo
FIT-6
Notes
1. Core drill as required, seal openings water-tight once cables
have been installed.
2. Provide new control wiring to existing valves/gates. Route
cables on existing and/or proposed cable tray from terminal
box to SCP-3A/3B.
3. Provide new control wiring to existing valves. Route cables Client/Project
on proposed cable tray to SCP-3. Applicable to: FD-C5,
FD-C6, FD-C7, FD-C8, FE-C5, FE-C6, FE-C7, FE-C8, FJW-C13,
FJW-C14. Town of Amherstburg
4. Provide new terminal boxes (see Details on E-502.). Provide
600V Power (from MCC-1), 120 Aux (from LP-B) and control Amherstburg WTP Electrical &
(from SCP-4) to each terminal box respectively (TBX-1, TBX-2
SCADA Upgrades
& TBX-3). Remove all existing wiring back to its source once
cables have been terminated.
A 5. Provide new network cable from SCP-3 to COM-2. Route
cable through proposed cable tray. See continuation on
drawing E-112. Title
6. Provide new instrumentation wiring, route cables in proposed
cable tray to SCP-3A/3B. Applicable to: FIT-6, FIT-7, AT-2/3,
Filter Pipe Gallery Plan Proposed
AIT-4/5, PDIT-1, PDIT-2, PDIT-3, PDIT-4. Elevation 597.50
7. Cable tray:
7.1. Cable trays are to be Galvanized Steel ladder type, CSA
D rated (120lb/ft max weight capacity). Secure to Scale
Project No.
ceiling at min. every 3000mm. 0 500 1500 2500mm
165620209
2022.05.03 11:15:29 AM
7.2. CT3-1 installation height: 3700mm AFF. 1:50
7.3. CT3-2 installation height: 3700mm AFF. Revision Sheet Drawing No.
of
E-113
7.4. CT3-3 installation height: 3700mm AFF.
8. Install HMI on wall at 1500mm AFF.
1 2 3 4 5
N
12.112.2
LIT-13 6
LI-13 CT4-1
1 11
LT-13 12.2 CT4-5 CT4-4 12.2 12.2 CT4-3 12.2 CT4-2 LE-13
FI-C1 3 6 3 6 FI-C2 FI-C3 3 6 FI-C4 3 6 171 Queens Avenue, 6th Floor
12.3 12.3 12.3 5 London ON N6A 5J7
Tel: 519.645.2007
12.3 www.stantec.com
Copyright Reserved
Legend
LI-2 LI-3 LI-4 LI-5
1 1 1 1 Electrical Proposed
LT-2 LT-3 LT-4 LT-5
SCADA Proposed
Electrical Removals
SCADA Removals
Existing Equipment
FILTER F-1 FILTER F-2 FILTER F-3 FILTER F-4

Notes
LE-2 LE-3 LE-4 LE-5
5 AIT 1 5
OIT-2 5
C LIT-2/3 2 8 UPS-2 9 2 8 LIT-4/5
FCP-1 10 FCP-2 10
FILTER
GALLERY


Permit/Seal
Notes
1. Remove instrumentation complete, including but not limited
Panel GCP-1. Applicable to: LI/LT-13, LI/LT-1, LI/LT-2, LI/LT-3,
LI/LT-4, FCP-1 & FCP-2.
2. Remove instrumentation wiring to GCP-1 complete. Client/Project Logo
Applicable to LIT-2/3, LIT-4/5.
3. Remove control wiring/conduit complete valve or gate, also
indicated on E-113: Applicable to: FI-C1, FI-C2, FI-C3, FI-C4.
4. Remove UPS-4 wiring, maintain existing receptacle.
5. Core drill as required, seal opening water tight with non
shrink grout once cables have been installed. Penetrations
are also indicated on E-113.
6. Provide new instrumentation equipment and wiring. Route
cable through floor openings to SCP-3. See E-113 for cable
route continuation. Applicable to: LIT-13
Client/Project
7. Provide new control wiring to valve or gate. Route cable
through floor penetration to terminal box in pipe gallery. See The Coorporation of the
E-113 for cable route continuation. Applicable to: FI-C1, Town of Amherstburg
FI-C2, FI-C3, FI-C4.
8. Provide new instrumentation wiring to SCP-3. Route cable Amherstburg WTP Electrical &
through floor opening to filter pipe gallery. See E-113 for
SCADA Upgrades
cable route continuation. Applicable to: LIT-2/3 , LIT-4/5.

9. Surface mount HMI 1500mm AFF. 415 Front Rd N., Amherstburg, ON, N9V 2V5
A 10. Remove Filter Control Panels FCP-1 and FCP-2, c/w control
A INSTRUMENT REMOVAL B FILTER CONTROL PANEL REMOVAL wiring and pneumatic tubing from each field valve, gate,
instrument, and to GCP-1. Title
TYP. LI/LT-2, 3, 4, 5, 13 TYP. FCP-1, 2
11. Notch existing hatch as required to allow 53mm LB fitting to
enter channel. Ultrasonic sensor to be mounted within
Filter Gallery Plan
conduit inside inlet channel. Protect conduit at ground level Elevation 611.50
with galvanized metal enclosure, secured to existing hatch
and wall.
12. Cable tray:
Project No. Scale
0 500 1500 2500mm
12.1. Cable trays are to be Galvanized Steel ladder type, CSA
165620209
2022.05.03 11:15:37 AM
D rated. All trays 150mm wide. Secure to wall at a min of 1:50

every 3000mm.
12.2. Installation height: 2400mm AFF.

12.3. Vertical cable trays to be secured to floor with unistrut.
of
E-114
1 2 3 4 5
AH-5
London ON N6A 5J7
LP-B2
Tel: 519.645.2007
AH-4 www.stantec.com
not in use
Copyright Reserved
D WASHROOM The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
LUNCH
ROOM LE-7 Legend
Electrical Proposed
SCADA Proposed
LIT-7 2 3
Electrical Removals
LIT-6 2 3
ALUM STORAGE SCADA Removals
ROOM
& BELL BACKBOARD

Existing Equipment
AC-1
located on roof
UPS
Notes
LE-6
OFFICE
OPERATOR
AREA
SC W
A S
D
WATER
A
CLOSET
5
C GCP-1 Notes
FI-10 PI-7 FIC-5 FIC-3 1. Remove instrumentation and control equipment complete
PDI-4 PDI-2 as indicated, including but not limited to, all conduits,
CONTROL FIC-11 wire(power & controls), auxiliary equipment. Once panel has
UIR-3 LI-4 LI-3
ROOM LDI-11 FIC-12 been removed, floor opening is to be filled and structurally
FIC-1 UIR-2
UIR-4 CS-1/VFD sound. Floor finish shall match existing. Applicable to: GCP-1.
LI-10 FIC-4 FIC-2
PI-6
UIR-5 UIR-1 PDI-3 PDI-1 2. Remove instrumentation wiring to GCP-1, maintain existing
LI-3 LI-2 instrumentation equipment. Applicable to: AIT-6/7 , AIT-8,
AIT-9, AIT-10, AIT-11, AIT-12, LIT-6. LIT-7
3. Provide new instrumentation wiring to SCP-1. Field
route/surface mount conduit, secure to wall or ceiling as
RTU-WTP 4 required. Applicable to: AIT-6/7, AIT-8, AIT-9, AIT-10, AIT-11, Revision By Appd YYYY.MM.DD
1 AIT-12, LIT-6, LIT-7.
4. Relocate existing backplane and all internal wiring and
2 3 AIT-8 components from RTU-WTP, into new RTU-1.
AIT-6/7 2 3 5. HMI-2, UPS-5, and associated equipment per specification
405000.2.1 to be installed at Operator Workstation.
AIT-9 Issued By Appd YYYY.MM.DD
AIT-12 2 3 AY-6
2 3
AE-12 AE-6
AIT-11 AY-6 File Name: 165620209-E115 ML/DM SSS SSS 2020.07.15
AE-11 AE-6 Dwn. Dsgn. Chkd. YYYY.MM.DD
COM-2
2 3 AIT-10 OFFICE SCADA
AE-10 ROOM Permit/Seal
SCP-1 COM-1
B
RTU-1 4
UPS-1
Client/Project Logo
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
Control Room Plan
A GCP-1 REMOVAL B GCP-1 REMOVAL C GCP-1 REMOVAL D GCP-1 REMOVAL Elevation 611.50
NTS NTS NTS NTS
Project No. Scale

0 500 1500 2500mm
165620209
2022.05.03 11:15:48 AM
1:50

of
E-115
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
Legend
Existing Equipment
Notes
CLARIFIER 1. Drawing is to show completeness and is to be used for
reference only.
2. Relable lighting panel to LP-B1
CLARIFIER
EFFLUENT
CHANNEL
C
CS-1
LCP
CR-1 M
CLARIFIER
V VALVE
CHAMBER
CLD-C2
CLI-C1 CLI-C2 CBW-C1 Revision By Appd YYYY.MM.DD
CLD-3
LP-B1 By YYYY.MM.DD
Issued Appd

Permit/Seal
CLARIFIER
B
OVERFLOW
CHAMBER
Client/Project Logo
to Drain Client/Project
Town of Amherstburg
Matchline 'E'
for continuation
SCADA Upgrades
see drawing ED-111

A EXISTING
ELECTRICAL
DUCTBANK Title
Clarifier Plan
Elevation 608.00
Project No. Scale

0 500 1500 2500mm
165620209
2022.05.03 11:15:55 AM
1:50
Matchline 'E'
for continuation Revision Sheet Drawing No.
see drawing ED-111

of
E-116
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
Legend
Electrical Proposed
SCADA Proposed
Existing Equipment
Notes
1
LP-B3 JBX-2
EF-3/MD Matchline 'D'
EF-3 2 5 For continuation
see drawing E-113
CMP-3/VFD CSH-1
3
CF-1 CF-1/VFD
CHEMICAL 3 CMP-4/VFD
FEED
C ROOM 4 CSH-1/CS
CMP-6/VFD 3 FILTER
POLYMER CSH-1/DS
CMP-5/VFD 3
TANK
MX-1 CMP-6
M
CMP-3
CMP-5
3 3 CMP-4 CARBON
CLARIFIER ROOM
CMP-2/VFD
CMP-1/VFD
POLYMER
CMP-1
CMP-2
TANK

MSP-1 AE/AIT-13 B For Review ML/DM SSS 2021.12.03
CHL-1/FI CHL-4/FI Issued By Appd YYYY.MM.DD
CHL-1/FC CHL-4/FC File Name: 165620209-E117 ML/DM SSS SSS 2020.07.15

JANITOR Fluoride station Dwn. Dsgn. Chkd. YYYY.MM.DD
CHLORINE Chlorinator 1 Chlorinator 4 CLOSET not functional
ROOM
CHL-2/FI CHL-3/FI Permit/Seal
CHL-2/FC CHL-3/FC
MH-1/C
Chlorinator 2 Chlorinator 3
B
EF-3/CS LP-SC
Matchline C
For continuation
see drawing E-112
Client/Project Logo
Client/Project
Town of Amherstburg
SCADA Upgrades

A Notes
1. Core drill as required, seal openings water-tight once cables Title
have been installed. See continuation on E-115.
2. Provide 24 circuit lighting panel. Splice and extend existing
Chlorine/Chemical Rm. Plan Proposed
loads are required. Provide new power wiring to VFD panels.
Field route conduits, secure to wall or ceiling as required.
Elevation 597.50
3. Provide new VFD panel for chemical pumps. Install panel
1500mm AFF. Two port, wall mounted work area outlet to be
installed between pair of VFD's and fed to each. Project No. Scale
0 500 1500 2500mm
4. Provide new power wiring for CSH-1 from MCC-1. Route 165620209
2022.05.03 11:16:00 AM
1:50
cables in existing cable tray from MCC-1. See cable route
continuation on E-112. Revision Sheet Drawing No.

5. Supply and install new 150x150x150mm PVC junction box to
splice existing carbon shaker feed from carbon room.
of
E-117
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13
Copyright Reserved
MH-2 MH-1 FEEDER BREAKER - any errors or omissions shall be reported to Stantec without delay.
RECEPTACLE
MONORAIL HOIST MONORAIL HOIST FOR LTG. TRANSF. B EF-3 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
IN GARAGE
HIGH LIFT AREA CHLORINE STORAGE NORMAL & EMERG CHLORINE ROOM use for any purpose other than that authorized by Stantec is forbidden.
EMERG, EXHAUST FAN
Legend
LIGHTING PANEL B FEEDER BREAKER
FOR NORMAL & EMERG
CONTACTOR FOR LIGHTING PANEL A HEATING PANELBOARD
POWER LOGIC LL-2 LL-1
LTG. TRANSF A
POWER METER LOW LIFT PUMP LOW LIFT PUMP
NORMAL ONLY
AUTO-TRANSFER
SWITCH HL-3 HL-2 HL-1
CAPACITORS
HIGH LIFT PUMP HIGH LIFT PUMP HIGH LIFT PUMP HEATING PANELBOARD
NORMAL EMERG
SPACE
HEATING PANELBOARD Notes
NORMAL ONLY
LTG. TRANSF. A
LL-3 WW-6 NORMAL ONLY
SPACE
LOW LIFT PUMP WASHWATER PUMP
LTG. TRANSF. B CONTACTOR FOR
SPACE
NORMAL & EMERG NORMAL ONLY
HEATING &
SPACE
PANELBOARD
A MCC-1 FRONT ELEVATION

1:16
B Draft Pre-Design Report ML/DM SSS 2021.03.08

A For Pre-Design Workshop ML/DM SSS 2020.10.07

R13 R12 R11 R10 R9 R8 R7 R6 R5 R4 R3 R2 R1 Permit/Seal
A
RECEPTACLE
ROOFTOP AC CL-1 AH-1
B LOW LIFT AREA
B SPARE CLARIFIER HIGH LIFT PUMP AREA
SCARPER DRIVE HEATING FAN
C
RECEPTACLE RECEPTACLE
RECIRCULATOR LIGHTING PANEL C
IN HIGH LIFT AREA IN BASEMENT AREA
D
AH-2
E SPARE ? HIGH LIFT PUMP AREA
SEWAGE POWER PANEL HEATING FAN
PUMP STATION CHEMICAL FEED ROOM
F Client/Project Logo
MAIN BREAKER LTG. TRANSF. A
CAPACITORS REAR OF HL-1 REAR OF HL-2 REAR OF HL-3
1000A. 3 POLE NORMAL ONLY
G AH-3
IAC-1 LTG. TRANSF. C
SPARE LIGHTING PANEL C PIPE GALLERY
INST, AIR COMP NORMAL ONLY
H VFD RECIRCULATOR HEATING FAN
120V TRANSFORMER
FOR DUCT HEATER
J AH-4
OUTSIDE LTG. IAC-2
OFFICE CONTROL RM
CONTROLS INST. AIR COMP FEEDER BREAKER FOR
K HEATING FAN
LTC. TRANSF. C
SPACE SPACE
L AH-5
TS-1 Client/Project
SPACE SPACE COMPRESSOR FEED CHEMICAL ROOMS
TRAVELING SCREEN
M HEATING FAN The Coorporation of the
Town of Amherstburg
SCADA Upgrades
A MCC-1 REAR ELEVATION
B
1:16
Title
General Arrangement
Existing MCC-1
Project No. Scale

165620209
2022.05.03 11:16:04 AM

of
ED-501
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
1A 2
Copyright Reserved
D SWB-1 SWB-1 SWB-1 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
3A
SPD use for any purpose other than that authorized by Stantec is forbidden.
SPD SERIES
SURGE PROTECTIVE DEVICE
ATS-1 Legend
UTILITY METERING 3B1 3B2
COMPARTMENT LL-1 125AF 125AF LL-2
3C
ATC
LL-3 250AF
AVAILABLE
UNIT STATUS
PM
CONNECTED
SOURCE 1
3D
PREFERRED
LOAD
AVAILABLE
SOURCE 2 CONNECTED
PREFERRED
LL-4 250AF
HELP
3E
ENGINE
ENTER LAMP
TEST
TEST
HL-1 250AF
BYPASS
TIMER
ATC-900
3F
HL-2 250AF
43ATC 3G
2321
HL-3 400AF
1B
3H
HL-4 400AF
Notes
3J
WW-6 250AF
3K
AHF-1 400AF
3L
MCC-1 400AF
MAIN 3M1
SPS-1 125AF
965 965 965
2895
A SWB-1 ELEVATION
1:16


1 2 3 4 5 Permit/Seal
TX-A MH-1 AC-1 A

CSH-1
B MAIN LUGS
FVNR-1
TX-B MH-2 REC-1 B
4" WIREWAY
4" WIREWAY
TX-G C
EF-3 AH-2
SPARE SPARE
FVNR-1 FVNR-1
UH-1 D
SPARE SPARE UH-2 E

CS-1 AH-3
4" WIREWAY
4" WIREWAY
4" WIREWAY
FVNR-1 FVNR-1
SAC-1 F Client/Project Logo
G
2001
AH-5 IAC-1
FVNR-1 FVNR-1
H
WW-6 HL-3 HL-2 HL-1 LL-3 LL-2 LL-1

J
CR-1 TS-1 IAC-2
LP-A LP-B
VFD FVNR-1 FVNR-1
K
L
IAC-3 Client/Project
SPARE
FVNR-1
M The Coorporation of the
Town of Amherstburg
SCADA Upgrades
403 807
A 3225 2540
Title
B MCP/VFD ELEVATIONS C MCC-1 ELEVATION General Arrangement

1:16 1:16
SWB-1, MCC-1, MCPs
Project No. Scale

165620209
2022.05.03 11:16:10 AM

of
E-501
1 2 3 4 5
100mm
100mm
London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
150mm The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
150mm use for any purpose other than that authorized by Stantec is forbidden.
Legend
2
2
150mm
4
150mm
1
1
5
5
Notes
3
3
B TBX-2 TERMINAL BOX DETAIL

A TBX-1 TERMINAL BOX DETAIL
1:2.5
1:2.5
C
BILL OF MATERIALS
BILL OF MATERIALS
ITEM QTY DESCRIPTION SPECIFICATION
1 1 POLYESTER ENCLOSURE - CSA 4X HAMMOND
SINGLE DOOR TWIST LATCH WITH FLANGE PJU664TF 1 1 POLYESTER ENCLOSURE - CSA 4X HAMMOND
6"x6"x4" (HxWxD) SINGLE DOOR TWIST LATCH WITH FLANGE PJU664TF
2 1 INNER BACKPLATE HAMMOND 6"x6"x4" (HxWxD)
14R0505 2 1 INNER BACKPLATE HAMMOND
3 as req. DIN RAIL PERFORATED PHOENIX CONTACT 14R0505
NS 35 /7,5 1210019 3 as req. DIN RAIL PERFORATED PHOENIX CONTACT
NS 35 /7,5 1210019 By Appd YYYY.MM.DD
4 2 END BRACKET PHOENIX CONTACT WEIDMULLER Revision
GRAY, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000) 4 2 END BRACKET PHOENIX CONTACT WEIDMULLER
2 END COVER PHOENIX CONTACT WEIDMULLER GRAY, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
GRAY DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N (1084000000) 2 END COVER PHOENIX CONTACT WEIDMULLER
3 FEED-THRU, 1-LEVEL MODULAR TERMINAL BLOCK PHOENIX CONTACT WEIDMULLER GRAY DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N (1084000000)
GRAY, 30A/500V, #26-10AWG UT 2,5 (3044076) WDK 2.5/TR-DU, 24A 6 FEED-THRU, 1-LEVEL MODULAR TERMINAL BLOCK PHOENIX CONTACT WEIDMULLER
(102010000) GRAY, 30A/500V, #26-10AWG UT 2,5 (3044076) WDK 2.5/TR-DU, 24A C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
5 2 END BRACKET PHOENIX CONTACT WEIDMULLER (102010000)
GRAY, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000) 5 2 END BRACKET PHOENIX CONTACT WEIDMULLER A For Review ML/DM SSS 2021.09.20
2 END COVER PHOENIX CONTACT WEIDMULLER GRAY, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
GRAY DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N (1084000000) Issued By Appd YYYY.MM.DD
2 END COVER PHOENIX CONTACT WEIDMULLER
3 FEED-THRU, 1-LEVEL MODULAR TERMINAL BLOCK PHOENIX CONTACT WEIDMULLER GRAY DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N (1084000000)
GRAY, 30A/500V, #26-10AWG UT 2,5 (3044076) WDK 2.5/TR-DU, 24A 6 FEED-THRU, 1-LEVEL MODULAR TERMINAL BLOCK PHOENIX CONTACT WEIDMULLER
(102010000) File Name: 165620209-E502 ML/DM SSS SSS 2020.12.18
GRAY, 30A/500V, #26-10AWG UT 2,5 (3044076) WDK 2.5/TR-DU, 24A
(102010000) Dwn. Dsgn. Chkd. YYYY.MM.DD
Permit/Seal
100mm
Client/Project Logo
150mm
Client/Project
4
Town of Amherstburg
150mm
1
SCADA Upgrades
BILL OF MATERIALS

A
1 1 POLYESTER ENCLOSURE - CSA 4X HAMMOND
SINGLE DOOR TWIST LATCH WITH FLANGE PJU664TF
6"x6"x4" (HxWxD)
Title
3 2 1 INNER BACKPLATE HAMMOND
14R0505 Clarifier Terminal Box
3 as req. DIN RAIL PERFORATED
NS 35 /7,5
PHOENIX CONTACT
1210019 Details
4 2 END BRACKET PHOENIX CONTACT WEIDMULLER
GRAY, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
2 END COVER PHOENIX CONTACT WEIDMULLER
GRAY DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N (1084000000) Project No. Scale
3 FEED-THRU, 1-LEVEL MODULAR TERMINAL BLOCK PHOENIX CONTACT WEIDMULLER
C TBX-3 TERMINAL BOX DETAIL 165620209
2022.05.03 11:16:17 AM
GRAY, 30A/500V, #26-10AWG UT 2,5 (3044076) WDK 2.5/TR-DU, 24A

(102010000)
1:2.5

of
E-502
1 2 3 4 5
HONI O/H SERVICE

27.6Y/16kV, 3∅/4w
SUBSTATION
STANDBY LBS London ON N6A 5J7
GENERATOR Tel: 519.645.2007
www.stantec.com
G-1 SA
600Y/347V
410kW
Copyright Reserved
D G The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
UTILITY The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
REVENUE IT use for any purpose other than that authorized by Stantec is forbidden.
GEN Legend
LSIG 600AF, 18kAIR
600AT
UM Removal Equipment
GENERATOR
BREAKER Existing Equipment
FU
TX-1
750/840kVA, ONAN, 55/65°C
27,600-600Y/347V Notes
Z = 5.5%
1. High Lift Pump 3 VFD is in free-standing enclosures /w
incoming breaker (not shown and dv/dt filter.
2. Other High Lift and all Low Lift Pumps VFDs are wall mount /w
external output dv/dt filter located below VFD or in MCC-1.\
3. Remove grouped motor control panel GMCP compete will
all field wiring for existing 5 loads not in use; provide new
AUTOMATIC TRANSFER starter in new MCC-1 for Carbon Elevator.
SWITCH
ATS-1
1000A
C
MANUAL TRANSFER
SWITCH
MTS-1
1000A
MCC-1
600V, 3∅/3w
CB-MAIN
800A
1000A
MOTOR CONTROL
CENTRE
A ED-602:1D Issued By Appd YYYY.MM.DD
SPS TS-1 LL-1 LL-2 LL-3 CS-1 CR-1 HL-1 HL-2 HL-3 WW-6 IAC-1 IAC-2 IAC-3 DP-CH File Name: 165620209-ED601 ML/DM SSS SSS 2020.07.15
100A MCP MCP MCP MCP MCP MCP MCP MCP MCP MCP 30A Dwn. Dsgn. Chkd. YYYY.MM.DD
FVNR FVNR FVNR FVNR FVNR FVNR FVNR Permit/Seal
LL-1 LL-2 LL-3 HL-1 HL-2 HL-3

VFD 50HP/VT VFD 100HP/VT VFD 100HP/VT VFD 125HP/VT VFD 125HP/VT VFD 250HP/VT
600/0-600V 600/0-600V 600/0-600V 600/0-600V 600/0-600V 600/0-600V
CAP
UM 20kVAR
DV/DT-L1 DV/DT-L2 DV/DT-L3 DV/DT-H1 DV/DT-H2 DV/DT-H3
IAC-1 IAC-2 IAC-3 Client/Project Logo

CS-1 CR-1
MCC-1 MCC-1 MCC-1 30A 30A 30A
30A 30A
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V,3∅
575V,3∅
575V,3∅
575V,3∅
575V,3∅
575V,3∅
GMCP
100HP
125HP
125HP
250HP
100HP
0.5HP
50HP
50HP
10HP
2HP
5HP
5HP
5HP
SEWAGE PUMPING STATION M M M M M M M M M M M M M 600V, 3∅/3w
60A (?)
TEXAS RD. & HWY. 18
TS-1 LL-1 LL-2 LL-3 CS-1 CR-1 HL-1 HL-2 HL-3 WW-6 IAC-1 IAC-2 IAC-3
TRAVELLING LOW LIFT LOW LIFT LOW LIFT CLARIFIER CLARIFIER HIGH LIFT HIGH LIFT HIGH LIFT WATER WASH INSTANTANEOUS INSTANTANEOUS INSTANTANEOUS
SCREEN PUMP 1 PUMP 2 PUMP 3 SCRAPER RECIRCULATION PUMP 1 PUMP 2 PUMP 3 PUMP 6 AIR COMPRESSOR 1 AIR COMPRESSOR 2 AIR COMPRESSOR 3
Client/Project
GROUPED MCP
CHEMICAL ROOM The Coorporation of the
Town of Amherstburg
SCADA Upgrades
A
Title
Single-line Diagram
Removals
Project No. Scale

165620209
2022.05.03 11:16:25 AM

of
ED-601
1 2 3 4 5
ED-601:2C
MCC-1
600V, 3∅/3w
800A
MOTOR CONTROL
CENTRE Stantec Consulting Ltd.
London ON N6A 5J7
Tel: 519.645.2007
ED-601:4B A B 1B
www.stantec.com
TX-C TX-B TX-A HC-1 HC-2 HC-3 HC-4 HC-5 AC-1 Copyright Reserved
30A 50A 50A 100A 100A 100A 70A 30A 30A
TX-C
15kVA Legend
600-208Y/120V
Removal Equipment
Existing Equipment
TX-A
30kVA
600-208Y/120V
TX-B
30kVA
600-208Y/120V
BASEMENT AREA Notes

1. Heater coils connected MCC-1 are converted to gas
heaters. Existing power and control wiring to be removed.
2. Unit heaters connected to Normal and Emergency Power
LP-C LP-B LP-A Heating Panel HP-1 and HP-2 are converted to gas heaters
14kW
28kW
28kW
14kW
28kW
28kW
14kW
28kW
28kW
10kW
20kW
10kW
208Y/120V, 3∅/4w 208Y/120V, 3∅/4w 208Y/120V, 3∅/4w
JBX-1
(not shown on drawings, Filter Room UH-1/2/3, Truck Door
__A, __kAint, 12cct __A, __kAint, 24cct __A, __kAint, 42cct UH-5, Garage UH-7/8). Existing power and control wiring to
HC-1/1 HC-1/2 HC-1/3 HC-2/1 HC-2/2 HC-2/3 HC-3/1 HC-3/2 HC-3/3 HC-4/1 HC-4/2 HC-5 AC-1 be removed.
HIGH LIFT PUMP HIGH LIFT PUMP HIGH LIFT PUMP HIGH LIFT PUMP HIGH LIFT PUMP HIGH LIFT PUMP PIPE GALLERY PIPE GALLERY PIPE GALLERY OFFICE AND CONTROLOFFICE AND CONTROL CHEMICAL ROOM 30A 3. Convection unit heaters connected to Normal and
AREA HEATING COIL AREA HEATING COIL AREA HEATING COIL AREA HEATING COIL AREA HEATING COIL AREA HEATING COIL HEATING COIL HEATING COIL HEATING COIL ROOM HEATING COIL ROOM HEATING COIL HEATING COIL
Emergency Power Heating Panel HP-1 and HP-2 are out of
service (not shown on drawings, Filter Gallery CUH-1/2/3/4).
Existing power and control wiring to be removed.
LIGHTING PANEL LIGHTING PANEL LIGHTING PANEL 4. Replace Low Lift Unit Heater UH-4 and Basement Unit Heater
UH-6, c/w power and control wiring as shown on E-602.
C 5. Existing Lighting Panel in Clarifier Area to remain and be
LP-AUX LP LP renamed to LP-B1.
208Y/120V, 3∅/4w 240/120V, 1∅/3w 208Y/120V, 3∅/4w
AC-1
__A, __kAint, 12cct 4cct, 10kAIR 100A, 10kAint, 24cct
ROOFTOP AC 6. Existing Lighting Panel in Alum Room to remain and be
renamed to LP-B2.
LIGHTING PANEL LIGHTING PANEL LIGHTING PANEL

CHEMICAL ROOM ALUM ROOM CLARIFIER

4D B A For Review ML/DM SSS 2021.09.20
SAC-1 EF-3 AH-1 AH-2 AH-3 AH-4 AH-5 MH-1 MH-2 REC-1 REC-2 REC-3 REC-4 REC-5 HP-1 HP-2
20A 20A 20A 100A 100A 100A 100A 100A 150A 100A File Name: 165620209-ED602 ML/DM SSS SSS 2020.07.15
FVNR FVNR FVNR FVNR FVNR FVNR

Permit/Seal
B
HP-1 HP-2
550V, 3∅/_w 550V, 3∅/_w
__A, __kAint, __cct __A, __kAint, __cct
SAC-1 MH-1 MH-2

30A 30A 30A
REC-3
30A HEATING PANEL HEATING PANEL Client/Project Logo
575V, 3∅
575V, 3∅
NORMAL EMERGENCY
0.5HP
10HP
M
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
0.75HP
0.5HP
1HP
1HP
SAC-1 EF-3 M M M M
SCREW CHLORINE ROOM
AIR COMPRESSOR 1 EMERGENCY REC-1 REC-2 REC-3 REC-4 REC-5
AH-2 AH-3 AH-4 AH-5 MH-1 MH-2 TX-G
EXHAUST FAN HIGH LIFT BASEMENT LOW LIFT TRUCK BAY GARAGE
10kW
20kW
HIGH LIFT PUMP PIPE GALLERY OFFICE & CONTROL CHEMICAL ROOM MONORAIL HOIST MONORAIL HOIST 15kVA, ANN
WELDING RECEPTACLE WELDING RECEPTACLE WELDING RECEPTACLE WELDING RECEPTACLE WELDING RECEPTACLE
AREA HEATING FAN HEATING FAN ROOM HEATING FAN HEATING FAN 600-208Y/120V
(NIS)
UH-5 UH-4
BASEMENT LOW LIFT
LP-G
UNIT HEATER UNIT HEATER 208Y/120V, 3∅/4w Client/Project
60A, 10kAint, 24cct
Town of Amherstburg
SCADA Upgrades
LIGHTING PANEL
GENERATOR ROOM 415 Front Rd N., Amherstburg, ON, N9V 2V5
A
Title
Single-line Diagram
Removals
Project No. Scale

165620209
2022.05.03 11:16:36 AM

of
ED-602
1 2 3 4 5
Electrical Ratings
Service Voltage 600Y/347V, 3Ø/4w
Installed Load 1232kW / 1449kVA
Demand Load 572kW / 606kVA
Available Short Circuit 18kA @ 600V
Demand load includes harmonic derating from VFD driven demand Stantec Consulting Ltd.
loads. 171 Queens Avenue, 6th Floor
Available SCC assumes 750kVA utility transformer /w 4% London ON N6A 5J7
impedance. Tel: 519.645.2007
www.stantec.com
Cable Schedule Copyright Reserved

Tag Description - any errors or omissions shall be reported to Stantec without delay.
3#2/0-28kV 3-1/C, #2/0AWG, Al, UD, TRXLPE 28kV-100%, use for any purpose other than that authorized by Stantec is forbidden.
100% CN (primary service, not shown)
Legend
HYDRO ONE 2-(3#600+#2) 2-3-1/C, 600kcmil, Cu, RW90 (sec. service/ph)
600Y/347V, 800A, 3∅/4w SERVICE 2-1/C, #2AWG, Cu, RW90 (reduced neutral) New Equipment
(PADMOUNT TRANSFORMER) 2-4C#350 2-4/C, 350kcmil, Cu, TECK90
Existing Equipment
STANDBY 3C#600 3/C, 600kcmil, Cu, TECK90
GENERATOR
3C#500 3/C, 500kcmil, Cu, TECK90
G-1 3C#2/0 3/C, #2/0AWG, Cu, TECK90
600Y/347V
2-(3#600+#2)
410kW
G 4C#2/0 4/C, #2/0AWG, Cu, TECK90

3C#1/0 3/C, #1/0AWG, Cu, TECK90
Notes
3C#3 3/C, #3AWG, Cu, TECK90
1. Each VFD is in located in Motor Control Panel, free-standing
GEN 3C#4 3/C, #4AWG, Cu, TECK90 enclosures /w breakers and output dv/dt filter.
LSIG 600AF, 18kAIR
600AT 1B 3C#6 3/C, #6AWG, Cu, TECK90 2. Reconnect neutral cable to generator X0 and remove
100% RATED 52M existing bond to ground.
GENERATOR 4C#8 4/C, #8AWG, Cu, TECK90
LSIG 800AF, 35kAIR
BREAKER
800AT 3C#10 3/C, #10AWG, Cu, TECK90
MAIN SERVICE
2-4C#350 ENTRANCE BREAKER 3C#12 3/C, #12AWG, Cu, TECK90
Individual motor control panel (MCP) feeder cables are sized same
VT
360-120V as motor branch circuit cables to a minimum 125% motor FLA.
MCPs are within 7.5m of switchboard SWB-1.
3
All power and control wiring to be copper, armored TECK90 cables
3 to CSA C22.2 No. 131. Alternatively, Thermoset Insulated RW90
UM
C CT cables to CSA C22.2 No. 38, with required number of conductors,
800-5A including bonding conductor sized to CSA C22.1/OESC, installed in
UTILITY METERING
COMPARTMENT UTILITY the conduit.
METERING
AUTOMATIC All conduit is to be rigid PVC conduit to CSA C22.2 No. 211.2, and
PANEL
ATC TRANSFER Flexible liquid-tight corrugrated non-metallic conduit to CSA C22.2
SWITCH No. 227.2.1 as Required. Size based on CSA C22.1/OESC unless
2B 2A
EO 89G EO 89U otherwise indicated.
MCS 800AF, 25kASCR MCS 800AF, 25kASCR
NON-AUTO NON-AUTO
GENERATOR UTILITY
SWITCH SWITCH
3
PM-1
A-V-kW/VAr-Hz
CT-1
800-5A
SWB-1
600V, 3∅/4w
3 to B For Review ML/DM SSS 2021.12.03
1200A, 50kASCR (BUS), 25kAIR
CT2 AHU-1 A For Review ML/DM SSS 2021.09.20
SERVICE ENTRANCE
800-5A
SWITCHBOARD Issued By Appd YYYY.MM.DD

SPD AHF-1 LL-1 LL-2 LL-3 LL-4 (FUTURE) HL-1 HL-2 HL-3 HL-4 (FUTURE) WW-6 MCC-1 SPS-1
125AF, 25kAIR LSIG 400AF, 25kAIR LSIG 125AF, 25kAIR LSIG 125AF, 25kAIR LSIG 250AF, 25kAIR LSIG 250AF, 25kAIR LSIG 250AF, 25kAIR LSIG 250AF, 25kAIR LSIG 400AF, 25kAIR LSIG 400AF, 25kAIR LSIG 250AF, 25kAIR LSIG 400AF, 25kAIR 125AF Permit/Seal
30AT 400AT 100AT 100AT 200AT 200AT 250AT 250AT 400AT 400AT 200AT 400AT 100AT
600Y/347V
3∅/4w
160kA
B
3C#600 3C#4 3C#4 3C#1/0 3C#2/0 3C#2/0 3C#500 3C#1/0 3C#600 3C#3
SPD
SURGE PROTECTIVE K 1
DEVICE
320A, 35kASCR
MCP-1 MCP-2 MCP-3 MCP-5 MCP-6 MCP-7 MCP-9

600V, 3∅
LL-1 LL-2 LL-3 HL-1 HL-2 HL-3 WW-6

LSI 125AF,25kASCR LSI 125AF,25kASCR LSI 250AF,25kASCR LSI 250AF,25kASCR LSI 250AF,25kASCR LSI 400AF,25kASCR LSI 250AF,25kASCR
100AT 100AT 200AT 250AT 250AT 400AT 200AT
UM
AHF-1 Client/Project Logo
AUTOMATIC 50A/LD 50A/LD 100A/LD 125A/LD 125A/LD 250A/LD 100A/LD
HARMONIC FILTER 600/0-600V 600/0-600V 600/0-600V 600/0-600V 600/0-600V 600/0-600V 600/0-600V
3C#4 3C#4 3C#1/0 3C#2/0 3C#2/0 3C#500 3C#1/0 E-602:D1

MCC-1
600V, 3∅/3w
600A, 42kASCR, 25kAIR
SEWAGE PUMPING STATION
TEXAS RD. & HWY. 18
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
52 FLA
125 FLA
125 FLA
242 FLA
52 FLA
99 FLA
99 FLA
100HP
125HP
125HP
250HP
100HP
Client/Project
50HP
50HP
T/LAH
M M M M M M M
LL-1
LOW LIFT
LL-2
LOW LIFT
LL-3
LOW LIFT
HL-1
HIGH LIFT
HL-2
HIGH LIFT
HL-3
HIGH LIFT
WW-6
WASH WATER
MOTOR CONTROL
CENTRE
Town of Amherstburg
PUMP 1 PUMP 2 PUMP 3 PUMP 1 PUMP 2 PUMP 3 PUMP 6
SCADA Upgrades

A
Title
Single-line Diagram
SWB-1
Project No. Scale

165620209
2022.05.03 11:16:45 AM

of
E-601
1 2 3 4 5
SWB-1
from
E-601:A3
MCC-1
600V, 3∅/3w
600A, 42kASCR, 25kAIR
MOTOR CONTROL Stantec Consulting Ltd.
CENTRE 171 Queens Avenue, 6th Floor
London ON N6A 5J7
Tel: 519.645.2007
3Ø 1B
www.stantec.com
3A 3B 1D 1F 1M 2B 2D 2F 2H 2K
TX-A TX-B EF-3 CS-1 CR-1 CSH-1 AH-2 AH-3 AH-5 TS-1 Copyright Reserved
LSI 125AF LSI 125AF MCP MCP MCP MCP MCP MCP MCP
D 60AT 60AT The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
FVNR-1 FVNR-1 FVNR-1 FVNR-1 FVNR-1 FVNR-1 FVNR-1 use for any purpose other than that authorized by Stantec is forbidden.
3C#6 3C#6
Legend
TX-A TX-B
45kVA, ANN 45kVA, ANN
600-208Y/120V 600-208Y/120V New Equipment
3C#12 3C#12 3C#12 3C#12 3C#12 3C#12 3C#12 3C#12 Existing Equipment
4C#2/0 4C#2/0
3M 4M
JBX-2
LP-A LP-B
208Y/120V, 3∅/4w 208Y/120V, 3∅/4w TBX-1
225A, 10kAint, 42cct 225A, 10kAint, 42cct
40A/3P
CS-1 CR-1 TS-1
20A/2P 100A/2P 30A 30A 30A
Notes
1. Existing distribution transformers TX-A and TX-C, and lighting
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
panels LP-A and LP-C, are being combined in single new
0.17HP
0.75HP
0.5HP
0.5HP
5HP
1HP
1HP
2HP
LIGHTING PANEL LIGHTING PANEL M M M M M M M M transformer TX-A and lighting panel LP-A.
2. New electric unit heaters are with integral thermostat and
EF-3 CS-1 CR-1 CSH-1 AH-2 AH-3 AH-5 TS-1 disconnect.
CHLORINE ROOM CLARIFIER CLARIFIER CARBON HIGH LIFT PUMP PIPE GALLERY CHEMICAL ROOM TRAVELLING
4C#8 3C#10 3C#3 3. For power cable schedule see drawing E-601.
EMERGENCY SCRAPER RECIRCULATOR SHAKER AREA HEATING FAN HEATING FAN HEATING FAN SCREEN
EXHAUST FAN
TBX-2
LP-B3 LP-B2 LP-B1

208Y/120V, 3∅/4w 208Y/120V, 3∅/4w 208Y/120V, 3∅/4w
100A, 10kAint, 24cct 4cct 100A, 10kAint, 24cct
C
LIGHTING PANEL LIGHTING PANEL LIGHTING PANEL

CHEMICAL ROOM ALUM ROOM CLARIFIER
4D 3Ø
4A 4B 5A 5B 5C 5D 5E 5F 5H 5K 5M Revision By Appd YYYY.MM.DD
MH-1 MH-2 AC-1 REC-1 TX-G UH-1 UH-2 SAC-1 IAC-1 IAC-2 IAC-3
125AF 125AF 125AF 125AF LSI 125AF 125AF 125AF 125AF MCP MCP MCP
20AT 20AT 20AT 30AT 20AT 25AT 15AT 30AT
FVNR-1 FVNR-1 FVNR-1

3C#10 3C#10 3C#10 3C#10 3C#12 3C#10 3C#12 3C#10 3C#12 3C#12 3C#12
JBX-1 TX-G Dwn. Dsgn. Chkd. YYYY.MM.DD
15kVA, ANN
MH-1/C MH-2/C
600-208Y/120V
30A 30A Permit/Seal
AC-1
30A
20A 20A
CLASS J CLASS J REC-1 LP-G SAC-1 IAC-1 IAC-2 IAC-3
30A 208Y/120V, 3∅/4w 30A 30A 30A 30A
FCV-2 FCV-2 60A, 10kAint, 24cct
B
575V, 3∅
575V, 3∅
575V, 3∅
575V, 3∅
10HP
10HP
20kW
10kW
5HP
5HP
M M M
REC-1
AC-1 UH-1 UH-2 SAC-1 IAC-1 IAC-2 IAC-3
LOW LIFT
ROOFTOP AC LOW LIFT BASEMENT SCREW INSTANTANEOUS INSTANTANEOUS INSTANTANEOUS
WELDING RECEPTACLE LIGHTING PANEL
MH-1 MH-2 UNIT HEATER UNIT HEATER AIR COMPRESSOR 1 AIR COMPRESSOR 1 AIR COMPRESSOR 2 AIR COMPRESSOR 3
GENERATOR ROOM
MONORAIL HOIST MONORAIL HOIST
Client/Project Logo
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
Single-line Diagram
MCC-1
Project No. Scale

165620209
2022.05.03 11:16:55 AM

of
E-602
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
LIGHTING PANEL LP-A (EXISTING) LIGHTING PANEL LP-A Legend

208Y/120V, 3Ø/4W 208Y/120V, 3Ø/4W
200A, 10kASC, 42cct 225A, 10kASC, 60cct
LOAD [VA] LOAD [VA]
CCT
CCT
DESCRIPTION DESCRIPTION DESCRIPTION CCT CCT DESCRIPTION
A B C A B C
Control Room and Laboratory Lights 15A 1 2 15A Alum Rm. And Locker Rm. Lights Control Room and Laboratory Lights 15A 1 2 15A Alum Rm. And Locker Rm. Lights
Lunch Rm. And Control Room Lights Filter Gallery Lunch Rm. And Control Room Lights Filter Gallery
Notes
15A 3 4 15A 15A 3 4 15A
1. Lighting Panel LP-A to be replaced with a like-for-like panel.
All existing circuits to be reconnected in place. Splice and
Building Exterior Lights 15A 5 6 15A Filter Lights Building Exterior Lights 15A 5 6 15A Filter Lights extend existing circuits as required.
Plugs 15A 7 8 15A Plugs Plugs 15A 7 8 15A Plugs
Cl. Storage Garage Chem. Feed Lights 20A 13 14 15A Building Exterior Lights Cl. Storage Garage Chem. Feed Lights 20A 13 14 15A Building Exterior Lights
C
H.P.L lights 15A 15 16 15A Building Exterior Lights H.P.L lights 15A 15 16 15A Building Exterior Lights
Truck Bay and Chem Storage Lights 15A 17 18 15A HLP Lights Truck Bay and Chem Storage Lights 15A 17 18 15A HLP Lights
Buliding Exterior Lights 15A 19 20 15A Basement Lights Buliding Exterior Lights 15A 19 20 15A Basement Lights
L.L. Area Lights 15A 21 22 15A Plugs L.L. Area Lights 15A 21 22 15A Plugs
Pipe Gallery 15A 23 24 15A Plugs Pipe Gallery 15A 23 24 15A Plugs

Plugs and Roadway Lights 15A 29 30 15A Plugs Plugs and Roadway Lights 15A 29 30 15A Plugs A For Review ML/DM SSS 2021.09.20
Roadyway Lights 15A 31 32 15A Spare Roadyway Lights 15A 31 32 15A Spare
TBC Sample Pump P-10 Dwn. Dsgn. Chkd. YYYY.MM.DD

Sample Pump P-10 15A 33 34 15A EF-4 EF-9 15A 33 34 15A EF-4 EF-9
Permit/Seal
EF-1 EF-2 AND EF-8 15A 35 36 15A EF-5 EF-10 EF-1 EF-2 AND EF-8 15A 35 36 15A EF-5 EF-10
Power Metering Panel 15A 37 38 Valves 15A 37 38

B 40A Water Heater 40A Water Heater
Valves 15A 39 40 Honeywell Panel 15A 39 40
Honeywell Panel 15A 41 42 15A P 11-12 Clarifier Sample Water Pumps Spare 15A 41 42 15A P 11-12 Clarifier Sample Water Pumps
COMMENTS:
Spare 15A 43 44 25A *Communication Cabinet COM-2
Spare 15A 45 46 20A *SCADA Control Panel SCP-1 Client/Project Logo
Spare 15A 47 48 20A *SCADA Control Panel SCP-2
Spare 15A 53 54 20A *RTU Control Panel RTU-1

Client/Project
Spare 15A 55 56 15A Spare The Coorporation of the
Town of Amherstburg
Spare 15A 57 58 15A Spare
Spare 15A 59 60 15A Spare SCADA Upgrades
COMMENTS: 415 Front Rd N., Amherstburg, ON, N9V 2V5

A * Denotes new circuits.
New cables shall be TECK90 cables with copper conductors, #12AWG for 15A and 20A, #10AWG for 25A branch circuits.
Title
Lighting Panel Schedule
LP-A
Project No. Scale

165620209
2022.05.03 11:16:58 AM

of
E-611
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
LIGHTING PANEL LP-B (EXISTING) LIGHTING PANEL LP-B Legend

208Y/120V, 3Ø/4W 208Y/120V, 3Ø/4W
LOAD [VA] LOAD [VA]
CCT
CCT
DESCRIPTION DESCRIPTION DESCRIPTION CCT CCT DESCRIPTION
A B C A B C
Low Lift Area and Basement Lights Pipe Galllery Lights 1 2

15A 1 2 15A
Kitchen Stove 40A 100A *Chemical Room Feed LP-B3
HLP Area Lights 15A 3 4 15A HLP Area Lights 3 4 Notes
1. Remove Lighting Panel LP-B & LP-C. All existing feeds to be
Chlorine Storage, Garage and Chem 5 6 rewired to new LP-B in place as seen in schedule. Splice and
Truckbay Lights 15A 5 6 15A extend existing circuits as required.
Feed *Alum Room Panel LP-B2 20A
7 8 40A *Clarifier Chamber Feed LP-B1
Lunch Room, Wash and Locker Room 15A 7 8 15A Office and Control Room
Low Lift Area and Basement Lights 15A 9 10

Filter Gallery and Lights 15A 9 10 15A Pipe Gallery and Lights
HLP Area Lights 15A 11 12 15A Pipe Galllery Lights

Control Room Lights 15A 11 12 15A Gallery Filter Lights
Truckbay Lights 15A 13 14 15A HLP Area Lights

Air Comp Blow Drydown 15A 13 14 15A Clocks Emerg Lights
C Chlorine Storage, Garage and Chem

Air Dryer Recep Honeywell Panel Lunch Room, Wash and Locker Room 15A 15 16 15A
15A 15 16 15A Feed
Filter Gallery and Lights 15A 17 18 15A Office and Control Room
Exit Lights 15A 17 18 15A Honeywell Panel
Control Room Lights 15A 19 20 15A Pipe Gallery and Lights

19 20 15A Clarifier Outside Lights
Air Comp Blow Drydown 15A 21 22 15A Gallery Filter Lights

Feed For Chemical Room Feed Room 40A 21 22 15A Clarifier Lights in Manhole
Air Dryer Recep 15A 23 24 15A Clocks Emerg Lights

23 24 15A Supply to Power Failure
COMMENTS: Exit Lights 15A 25 26 15A Honeywell Panel
North End Filter Gallery Unit Heater 15A 27 28 15A Honeywell Panel
Front Entrance Stairs Unit Heater 15A 29 30 15A Clarifier Outside Lights B For Review ML/DM SSS 2021.12.03

South East Garage Door Unit Heater 15A 31 32 15A Clarifier Lights in Manhole
South Gallery Unit Heater 15A 33 34 15A Supply to Power Failure Dwn. Dsgn. Chkd. YYYY.MM.DD
LIGHTING PANEL LP-C (EXISTING) Garage Door Unit Heater + Battery

208Y/120V, 3Ø/4W Charger
15A 35 36 15A South East Garage Door Unit Heater Permit/Seal
100A, 10kASC, 12cct
Spare 15A 37 38 15A North End Unit Heater
B LOAD [VA]
CCT
CCT
DESCRIPTION DESCRIPTION Spare 15A 39 40 15A Stairway Front Unit Heater

A B C
1 2 15A South End Gallery Unit Heater
Clarifier Chamber Feed LP-CL 100A
3 4 15A S. East Garage Door Unit Heater

North End Unit Heater 15A 5 6 15A Unit Heater Garage Door Client/Project Logo
Stair Front Unit Heater 15A 7 8
20A Air Station Alum Room Panel
9 10
Kitchen Stove 40A
11 12 15A MCC Panel Fan
COMMENTS: Spare 15A 53 54 15A Spare
Spare Spare
Client/Project
15A 55 56 15A
15A 57 58 15A Spare Town of Amherstburg
Spare
15A 59 60 15A Spare
SCADA Upgrades
COMMENTS:
* Denotes new circuits. 415 Front Rd N., Amherstburg, ON, N9V 2V5
A New cables shall be TECK90 cables with copper conductors, #10AWG for 20A, #6AWG for 40A, and #1AWG for 100A feeder circuits.
Title
LP-B & LP-C
Project No. Scale

165620209
2022.05.03 11:17:05 AM

of
E-612
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
LIGHTING PANEL LP-AUX (EXISTING) LIGHTING PANEL LP-B3 Legend

208Y/120V, 3Ø/4W 208Y/120V, 3Ø/4W
LOAD [VA] LOAD [VA]
CCT
CCT
CCT
CCT
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
A B C A B C
Exhaust Fan
1 2 15A 1 2 15A Exhaust Fan
Lime Mixer
Silica Water Heater 30A Silica Water Heater 30A
3 4 15A Carbon Feed Carbon Feed (CF-1)
Notes
3 4 15A
1. All breakers in LP-B3 feeding Chemical Metering Pumps to
be provided with lockable hasps.
Milltronic Feed 15A 5 6 *Clarifier Polymer Pump 1 (CMP-1) 15A 5 6
Fluoride Pump /
30A 30A Lime Feed
Lime Feed
Polymer Pump 15A 7 8 *Clarifier Polymer Pump 2 (CMP-2) 15A 7 8
Alum Pump 2 15A 9 10 15A Chlorine Dioxide Pump *Filter Polymer Pump 1 (CMP-3) 15A 9 10 15A Chlorine Dioxide Pump
Alum Pump 1 15A 11 12 15A Chlorine Detector *Filter Polymer Pump 2 (CMP-4) 15A 11 12 15A Chlorine Detector
COMMENTS:
*Alum Feed Pump 1 (CMP-5) 15A 13 14 15A Lime Mixer
C
*Alum Feed Pump 2 (CMP-6) 15A 15 16 15A Spare

COMMENTS:
* Denotes new circuits.
New cables shall be TECK90 cables with copper conductors, #12AWG for 20A branch circuits.


Permit/Seal
Client/Project Logo
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
LP-B3
Project No. Scale

165620209
2022.05.03 11:17:09 AM

of
E-613
1 2 3 4 5
ATC RIO-1
BK
∅C
∅B
RD
∅N
BL
∅A
89U/a ATC DO1
W
DI1 7C#14 DI
SOURCE 1
NORMAL AVAILABLE
G-1 SWITCH LOAD ON
600Y/347V
STATUS SOURCE 1
N ∅C ∅B ∅A
410kW
G Stantec Consulting Ltd.
89G/a DO2
52M 12 DI2 SOURCE 2 171 Queens Avenue, 6th Floor
DI
800AF, 35kAIR EMERGENCY AVAILABLE London ON N6A 5J7
N 800AT SWITCH LOAD ON Tel: 519.645.2007
LSIG STATUS SOURCE 2 www.stantec.com
GEN G N MAIN SERVICE HS-1
600AF, 18kAIR ENTRANCE BREAKER A M DO3
T ES Copyright Reserved
D N 600AT 00X0 DI3 DI
SOURCE 1
LSIG 13 14 ATS CONNECTED
G GENERATOR GROUND G MANUAL SOURCE 1 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
BREAKER MODE CONNECTED use for any purpose other than that authorized by Stantec is forbidden.
GRID
DO4 Legend
X000 DI4 DI
SOURCE 2
23 24 ATS CONNECTED
TEST SOURCE 2 New Equipment
MODE CONNECTED
Existing Equipment
DO5
360-120V 000X DI5 DI
GENERAL
33 34 ENGINE ALARM
TEST/AUTO/MAN/ START ATC
ENGINE START FAULT
DO6
COM NOT IN
DI
AUTO Notes
UTILITY METERING Where ATC does not have ATC 1. All new field control wiring to be multi-conductor, #14AWG
COMPARTMENT assignable inputs, wire appropriate NOT IN AUTO copper, armored TECK90 cables to CSA C22.2 No. 131,
of control switch HS-1 contacts number of conductors as indicated on drawing.
in ATS control circuit.
G GN GC GB GA G UN UC UB UA L
N ∅C ∅B ∅A ∅A
ATC ATC
VA2 VA1
SOURCE 2 SOURCE 1
VOLTAGE ∅A VOLTAGE ∅A
VB2 VB1
SOURCE 2 SOURCE 1 G-1
VOLTAGE ∅B VOLTAGE ∅B GEN GC
C VC2 VC1 2C#14
SOURCE 2 SOURCE 1
VOLTAGE ∅C VOLTAGE ∅C GENERATOR
VN2 VN1 START
SOURCE 2 SOURCE 1
CPT2 VOLTAGE N CPT1 VOLTAGE N
H1 X1 L2 H1 X1 L1
SOURCE 2 SOURCE 1
H2 X2 LINE H2 X2 LINE
N2 N1
600-120V 600-120V
SOURCE 2 SOURCE 1
LINE LINE
L2 By Appd YYYY.MM.DD
042
Revision
N2
035 DO1
5C#14 DI
GENERATOR
RUNNING
RUNNING STATUS C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
DO2 By YYYY.MM.DD
GENERATOR Issued Appd
DI
GENERAL
89G 89U GENERAL ALARM File Name: 165620209-E621 ML/DM SSS SSS 2020.12.18
800AF, 25kASCR 800AF, 25kASCR ALARM Dwn. Dsgn. Chkd. YYYY.MM.DD
NON-AUTO NON-AUTO
DO3
GENERATOR UTILITY L2 DI
GENERATOR Permit/Seal
SWITCH SWITCH 034 AUTO
AUTO MODE
ATC
DO4
B GENERATOR
DI
LOW FUEL
LOW FUEL ALARM
CLOSE/GS CLOSE/US ALARM
GENERATOR UTILITY
SWITCH CLOSE SWITCH CLOSE
ATC L
VA
LOAD
VOLTAGE ∅A
VB Client/Project Logo
LOAD
VOLTAGE ∅B
VC
LOAD
VOLTAGE ∅C
VN
LOAD
VOLTAGE N
12 89G/b 89U/b
GENERATOR UTILITY Client/Project
SWITCH SWITCH
M MOTOR
MECHANISM Town of Amherstburg
SCADA Upgrades

A
Title
G N C B A Control Schematics
Automatic Transfer Switch
Project No. Scale

165620209
2022.05.03 11:17:14 AM

of
E-621
1 2 3 4 5
001 071
600Vac
002 52M VFD DV/DT 072 52M 11M IAC-1
42M
003
from SWB-1 L1 073
088 06 L1
∅A 1L1 2T1 1L1 2T1 1L1 2T1 TB1 1L1 2T1 1L1 2T1 1L1 2T1 TB1 1L1 2T1
LL-1 IAC-1
from SWB-1 L2 L2
004 M LOW LIFT 074 M INSTANTANEOUS
∅B 3L2 4T2 3L2 4T2 3L2 4T2 TB1 3L2 4T2 3L2 4T2 3L2 4T2 TB1 3L2 4T2
PUMP 1 AIR COMPRESSOR 1
005
from SWB-1 L3 075
L3
∅C 5L3 6T3 5L3 6T3 5L3 6T3 TB1 5L3 6T3 5L3 6T3 5L3 6T3 TB1 5L3 6T3 Stantec Consulting Ltd.
50HP ∅A ∅B ∅C 5HP 171 Queens Avenue, 6th Floor
006 575V, 3∅ 076 575V, 3∅ London ON N6A 5J7
FU-1 V1
0.5A Tel: 519.645.2007
007 OIT 077
V2 www.stantec.com
H1 H2
008 Network (Ethernet/IP) 078 CPT-1 V3 Copyright Reserved
100VA
D 009 079
FU-2 X1 X2
600-120V The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
010 080
X2 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
NOTES TB2 use for any purpose other than that authorized by Stantec is forbidden.
Typical Motor Control Schematics
011 081
1A
1. Local control, speed reference and status indication, and LOC/REM selection:
MCC/MCP Tag Decription VFD OIT.
Legend
012 082
MCP-1 LL-1 Low Lift Pump 1 2. Remote control, speed reference and status indication: Network (Ethernet/IP). 11M
New Equipment
013 083 L 120Vac N
MCP-2 LL-2 Low Lift Pump 2 3. Provide new field power wiring.
Existing Equipment
014 MCP-3 LL-3 Low Lift Pump 3 084
Field Wiring (Controls)
015 MCP-5 HL-1 High Lift Pump 1 085 42M
RO1
STARTER
016 MCP-6 HL-2 High Lift Pump 2 086
1 1A MS
TB2 TB2 A1 A2
017
MCP-7 HL-3 High Lift Pump 3 087
RUN/FAULT NO 073,074,075
MCP-9 WW-6 Wash Water Pump 6 NC
018 088
PSH
OIT Notes
1 I1 1. All new field control wiring to be multi-conductor, #14AWG
019 089 I1
TB2 TB2 copper, armored TECK90 cables to CSA C22.2 No. 131,
REM RUN
020 090
100/125PSI number of conductors as indicated on drawing.
PRESSURE
11M/MMR I/O 2. For new power wiring, see drawings E-601.
021 091
CONTROL SW.
3. For communication wiring see drawing EI-602.
022 092
023 093 NOTES

Typical Motor Control Schematics 1. Motor Management Relay (11M/MMR) AB E300, ABB UMC100, Eaton C445, or
024 094
Schneider TeSys T, programmed as "Direct/Independent Mode (FVNR)".
MCC/MCP Tag Decription
025 095 2. 11M/MMR Relay Output RO1 closes on Local or Remote start command, opens
MCC-1/5H IAC-1 Instantaneous Air Compressor 1 on Local or Remote stop command, or fault.
026 096
MCC-1/5K IAC-2 Instantaneous Air Compressor 2 3. Local control and status indication, and LOC/REM selection: 11M/MMR OIT.
C 027 097 MCC-1/5M IAC-3 Instantaneous Air Compressor 3 4. Remote status indication: None.
028 098 5. Remote control: 11M/MMR IO, 2-wire control.
029 099
6. Reconnect existing field power and control wiring. Existing pressure switch and
and disconnect to remain.
030 100
031 101
032 102
033 103
034 104 Revision By Appd YYYY.MM.DD
035 105
036 106
600Vac 600Vac
037 52M 11M TS-1 107 52M 11M
42M 42M B For Review ML/DM SSS 2021.12.03
038
051 06 L1 051
108
121 06 L1 A For Review ML/DM SSS 2021.09.20
1L1 2T1 1L1 2T1 1L1 2T1 TB1 1L1 2T1 1L1 2T1 1L1 2T1 1L1 2T1 TB1
TS-1 AH-1 Issued By Appd YYYY.MM.DD
L2 L2
039 M TRAVELLING 109 M HIGH LIFT PUMP
SCREEN AREA HEATING FAN
040
L3 110
L3 File Name: 165620209-E631 ML/DM SSS SSS 2020.12.18
∅A ∅B ∅C 2HP ∅A ∅B ∅C 1HP Dwn. Dsgn. Chkd. YYYY.MM.DD
041 575V, 3∅ 111 575V, 3∅
FU-1 V1 FU-1 V1
042
0.5A 112
0.5A Permit/Seal
V2 V2
H1 H2 H1 H2
043 CPT-1 V3
113 CPT-1 V3
100VA 100VA
044 600-120V 114 600-120V
FU-2 X1 X2 FU-2 X1 X2
B X2 X2
045 115
TB2 TB2
046
1A 116
1A
11M
047 42M 117
TS-1/a RO1 11M
STARTER
1 038 1A
048 MS 118 L 120Vac N
TB2 13 14 TB2 A1 A2
049
RUN/FAULT NO 038,039,040 119
NC
050 120
RO1
42M Client/Project Logo
STARTER
I2 1 1A
051 I2 OIT 121 MS
TB2 TB2 TB2 A1 A2
READY/
Network (Ethernet/IP) RUN/FAULT
052 PERMISSIVE 122 NO 108,109,110,130
NC
053 123
AH-1/CP
HS1 HS2
1 I1 1 I1
054 I1 124 I1 OIT
TB2 TB2 TB2 11 12 13 14 TB2
SPARE REM START
055 125
STOP START
056 126
I2 Client/Project
057 L 120Vac N 127 I2
TB2
REM STOP/ The Coorporation of the
058 128 PERMISSIVE
11M/MMR I/O Town of Amherstburg
059 129 ON 11M/MMR I/O
42M/a TS-1/SV 42M/a
060
013 2 X2 WASH WATER 130
121 2 G
X2 Amherstburg WTP Electrical &
13 14 TB2 TB2 SOLENOID VALVE 13 14 TB2 X1 X2 TB2
SCADA Upgrades
061 131
062 Typical Motor Control Schematics NOTES 132 NOTES 415 Front Rd N., Amherstburg, ON, N9V 2V5
A Typical Motor Control Schematics
1. Motor Management Relay (11M/MMR) AB E300, ABB UMC100, Eaton C445, or 1. Motor Management Relay (11M/MMR) AB E300, ABB UMC100, Eaton C445, or
063 MCC/MCP Tag Decription Schneider TeSys T, programmed as "Direct/Independent Mode (FVNR)". 133
MCC/MCP Tag Decription Title
MCC-1/2K TS-1 Traveling Screen 2. 11M/MMR Relay Output RO1 closes on Local or Remote start command, opens 2. 11M/MMR Relay Output RO1 closes on Local or Remote start command, opens
064
on Local or Remote stop command, or fault.
134 MCC-1/2D AH-2 High Lift Pump Area Heating Fan
Control Schematics
065 135 MCC-1/2F AH-3 Pipe Gallery Heating Fan
3. Local control and status indication, and LOC/REM selection: 11M/MMR OIT. 3. Local control and status indication, and LOC/REM selection: 11M/MMR OIT. MCP-1/2/3/5/6/7/9
066 136 MCC-1/2H AH-5 Chemical Room Heating Fan
4. Remote control and status indication: Network (Ethernet/IP). 4. Remote status indication: None.
MCC-1
067 5. Provide new local disconnect, and field power and control wiring. 137 5. Remote control: 11M/MMR IO, 3-wire control.
6. Reconnect existing field power and control wiring. Existing control in local Project No. Scale
068 138
control panel to remain; rewire as required. 165620209
2022.05.03 11:17:21 AM
069 139
070 140

of
E-631
1 2 3 4 5
001 071
600Vac 600Vac
002 52M 11M 072 52M VFD DV/DT CR-1
42M TBX-1
003
016 013,016,019,048,051,054,057 L1 073
L1 2L1 051
1L1 2T1 1L1 2T1 1L1 2T1 TB1 1L1 2T1 1L1 2T1 1L1 2T1 TB1 TB2 1L1 2T1
EF-3 CR-1
L2 L2 2L2
004 M CHLORINE ROOM 074 M CLARIFIER
EMERGENCY RECIRCULATOR
L3 L3 2L3
005 EXHAUST FAN 075 Stantec Consulting Ltd.
∅A ∅B ∅C 0.5HP ∅A ∅B ∅C 5HP 171 Queens Avenue, 6th Floor
006 575V, 3∅ 076 575V, 3∅ London ON N6A 5J7
FU-1 V1
0.5A Tel: 519.645.2007
007
V2
077 OIT
www.stantec.com
H1 H2
008 CPT-1 078 Network (Ethernet/IP)
V3 Copyright Reserved
100VA
D 009
FU-2 X1 X2
600-120V 079 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
010
X2 080 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
TB2 NOTES use for any purpose other than that authorized by Stantec is forbidden.
Typical Motor Control Schematics
011
1A 081 1. Local control, speed reference and status indication, and LOC/REM selection:
MCC/MCP Tag Decription VFD OIT.
Legend
012 082
11M MCC-1/1M CR-1 Clarifier Recirculator 2. Remote control, speed reference and status indication: Network (Ethernet/IP). New Equipment
013 L 120Vac N 083
3. Existing local control panel, common to Clarifier Recirculator CR-1 and Clarifier
Existing Equipment
014 084 Scraper CS-1, is to remain but out of service.
015 42M 085
RO1
STARTER
016
1 1A MS 086
TB2 TB2 A1 A2
017
RUN/FAULT NO 003,004,005,022,E-631:060,E-633:060
087
NC
EF-3/CS
018
HS
088 Notes
1 I1 1. All new field control wiring to be multi-conductor, #14AWG
019 I1 OIT 089
TB2 TB2 copper, armored TECK90 cables to CSA C22.2 No. 131,
REM RUN
020 090 number of conductors as indicated on drawing.
HAND SWITCH
2. For new power wiring, see drawings E-601.
021 11M/MMR I/O 091
42M/a 3. For communication wiring see drawing EI-602.
022
013 2 X2 EF-3/MD 092
13 14 TB2 TB2 MOTORIZED
023
DAMPER 093
024 094
025 NOTES 095

Typical Motor Control Schematics 1. Motor Management Relay (11M/MMR) AB E300, ABB UMC100, Eaton C445, or
026 096
C 027 2. 11M/MMR Relay Output RO1 closes on Local or Remote start command, opens 097
MCC-1/1D EF-3 Chlorine Room Emergency Exhaust Fan on Local or Remote stop command, or fault.
028 098
3. Local control and status indication, and LOC/REM selection: 11M/MMR OIT.
029 4. Remote status indication: None. 099
030 5. Remote control: 11M/MMR IO, 2-wire control. 100
031
6. Reconnect existing field power and control wiring. Existing control hand switch 101
to remain. Existing motorized damper to remain.
032 102
033 103
034 104 Revision By Appd YYYY.MM.DD
035 105
036 106
600Vac 600Vac
037 52M 11M 107 52M 11M CS-1
42M 42M TBX-1 B For Review ML/DM SSS 2021.12.03
038
051 06 L1 108
051 06 L1 1L1 051 A For Review ML/DM SSS 2021.09.20
CSH-1 CS-1 Issued By Appd YYYY.MM.DD
L2 L2 1L2
039 M CARBON 109 M CLARIFIER
SHAKER SCRAPER
040
L3 110
L3 1L3 File Name: 165620209-E632 ML/DM SSS SSS 2020.12.18
∅A ∅B ∅C 0.17HP ∅A ∅B ∅C 0.5HP Dwn. Dsgn. Chkd. YYYY.MM.DD
041 575V, 3∅ 111 575V,3∅
FU-1 V1 FU-1 V1
042
0.5A 112
0.5A Permit/Seal
V2 V2
H1 H2 H1 H2
043 CPT-1 V3
113 CPT-1 V3
100VA 100VA
044 600-120V 114 600-120V
FU-2 X1 X2 FU-2 X1 X2
B X2 X2
045 115
TB2 TB2
046
1A 116
1A
11M
047 117 42M
11M RO1
STARTER
1 1A
048 L 120Vac N 118 MS
TB2 A1 A2
RUN/FAULT
049 MCC-1 119 OIT NO 038,039,040
2B NC
050
RO1
42M 120 Network (Ethernet/IP) Client/Project Logo
STARTER
1 1A
051 MS 121 L 120Vac N
TB2 A1 A2
052
RUN/FAULT NO 038,039,040,060 122
CSH-1/CS NC
11M/MMR I/O
053
HS1 123
ON OFF
HS2 HS3
1 X0 I1 NOTES
054 I1 OIT 124
TB2 13 14 11 12 13 14 TB2
REM START Typical Motor Control Schematics 1. Motor Management Relay (11M/MMR) AB E300, ABB UMC100, Eaton C445, or
055
ON/OFF STOP START 125
056 126 2. 11M/MMR Relay Output RO1 closes on Local or Remote start command, opens
MCC-1/1M CR-1 Clarifier Recirculator on Local or Remote stop command, or fault. Client/Project
I2
057 I2 127
TB2
REM STOP/ 3. Local control and status indication, and LOC/REM selection: 11M/MMR OIT. The Coorporation of the
058 PERMISSIVE 128 4. Remote control and status indication: Network (Ethernet/IP).
Town of Amherstburg
059 ON 11M/MMR I/O 129 5. Existing local control panel, common to Clarifier Recirculator CR-1 and Clarifier
42M/a
060
051 2 G
X2 130
Scraper CS-1, is to remain but out of service. Amherstburg WTP Electrical &
13 14 TB2 X1 X2 TB2
SCADA Upgrades
061 131
062 NOTES 132

A Typical Motor Control Schematics
1. Motor Management Relay (11M/MMR) AB E300, ABB UMC100, Eaton C445, or
063 133
MCC/MCP Tag Decription Schneider TeSys T, programmed as "Direct/Independent Mode (FVNR)". Title
2. 11M/MMR Relay Output RO1 closes on Local or Remote start command, opens
064 MCC-1/2B CSH-1 Carbon Shaker
134
Control Schematics
065 135
3. Local control and status indication, and LOC/REM selection: 11M/MMR OIT. MCC-1
066 4. Remote status indication: None. 136
067 5. Remote control: 11M/MMR IO, 3-wire control. 137

6. Maintain existing local control station; confirm local wiring and rewire as Project No. Scale
068 138
required. 165620209
2022.05.03 11:17:31 AM
069 7. Provide new field power and control wiring. 139

070 140

of
E-632
1 2 3 4 5
001 071
208Y/120Vac LP-C
002 CB CMP-1/VFD 072
Network (Ethernet/IP)
003 073
CMP-1
004 M CLARIFIER POLYMER 074
METERING PUMP 1
005 075 Stantec Consulting Ltd.
∅A ∅B ∅C N 0.5HP 171 Queens Avenue, 6th Floor
006 0.5HP 208V, 3∅ 076
London ON N6A 5J7
208/0-208V
007 077
Tel: 519.645.2007
www.stantec.com
008 078
Copyright Reserved
D 009 079 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
010 080 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
011 Typical Motor Control Schematics NOTES 4.081
1. Local control, speed reference and status indication, and LOC/REM selection: Legend
012 Tag Decription Rating VFD OIT. 082
New Equipment
013 CMP-1 Clarifier Polymer Metering Pump 1 0.5HP, 208V-3Ø, 1.68A 2. Remote control, speed reference and status indication: Network (Ethernet/IP). 083
CMP-2 Clarifier Polymer Metering Pump 2 0.25HP, 115V-1Ø, 5.4A (existing); 3. Provide like-for-like replacement of CMP-2 & CMP-3 1Ø motor to 3Ø motor. See Existing Equipment
014 084
0.25HP, 208V-3Ø, 1.4A (new) nameplate details A & B.
015 085
CMP-3 Filter Polymer Metering Pump 1 0.5HP, 115V-1Ø, 4.6A (existing);
016 0.5HP, 208V-3Ø, 2.4A (new) 086
CMP-4 Filter Polymer Metering Pump 2 0.25HP, 208V-3Ø, 1.2A
017 087
CMP-5 Alum Metering Pump 1 0.5HP, 208V-3Ø, 1.68A
018 088 Notes
CMP-6 Alum Metering Pump 2 0.5HP, 208V-3Ø, 1.68A
019 089 1. For new power wiring, see drawings E-601 and E-613.
2. For communication wiring see drawing EI-602.
020 090
021 091
022 092
023 093
024 094
A Clarifier Polymer Metering Pump 2 B Filter Polymer Metering Pump 1
025 095
600Vac CMP-2 CMP-3
026 MH-1 DS 096
FU C
C 027
051
097
1L1 2T1 1L1 2T1
MH-1
028
3L2 4T2 3L2 4T2
M MONORAIL HOIST 098
CHLORINE ROOM
029 099
5L3 6T3 5L3 6T3
∅A ∅B ∅C 125AF 30A
20A
030 20AT 575V, 3∅ 100
CLASS J FU-1
031
0.5A 101
H1 H2
032 CPT-1 102
100VA
033 600-120V 103
FU-2 X1 X2
X2 By Appd YYYY.MM.DD
034
TB2
104 Revision
035
1A 105
HS-1
036 C 106
X0
ON OFF CONTACTOR
037 C 107 C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
13 14 A1 A2 B For Review ML/DM SSS 2021.12.03
038
ON/OFF NO 038,039,040,051 108 A For Review ML/DM SSS 2021.09.20
NC Issued By Appd YYYY.MM.DD
039 LT-1 109
C/a
048
ON
040 G 110 File Name: 165620209-E633 ML/DM SSS SSS 2020.12.18
13 14 X1 X2
041 111
042 112 Permit/Seal

043 NOTES 113
Typical Motor Control Schematics 1. Combination fused-disconnect full-voltage contractor in CSA 1 enclosure with
044 114
local control and indication.
B MCC/MCP Tag Decription
045 2. Reconnect existing line and load side conduit and cables. 115
- MH-1 Monorail Hoist 1
046 116
- MH-2 Monorail Hoist 2
047 117
048 118
049 119
050 120 Client/Project Logo

051 121
052 122
053 123
054 124
055 125
056 126
Client/Project
057 127
058 128
Town of Amherstburg
059 129
060 130
SCADA Upgrades
061 131
062 132
A
063 133
Title
064 134
Control Schematics
065 135
Miscellaneous
066 136
067 137
Project No. Scale
068 138
165620209
2022.05.03 11:17:42 AM
069 139
070 140

of
E-633
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
914,4mm Copyright Reserved

D [36,0"] The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
Legend
A3
406,8mm
[16,0"]
Notes
1. UPS to be mounted on stainless steel shelf directly next to
A4 SCADA Panel.
2. Stainless steel laptop shelf to be located directly above UPS
shelf.
3. Provide pre-drilled plate on top of panel.
4. Only installed in SCP-1.
C 838,2mm
[33,0"] A1
MANUFACTURE OF PANEL.
PP-x
4
MANUFACTURE ADDRESS, TELEPHONE, EMAIL ADDRESS.
CONTRACT NUMBER, PO NUMBER.
ENGINEERING CONTACT NUMBER IF DIFFERENT THAN CONTRACT
NUMBER.
DANGER
SCP-x
SCADA CONTROL PANEL THIS UNIT FED
VOLTAGE: 120VAC 1-PH BY UPS
FIELD
FIELD
CURRENT: 15A
POWER
X1
SCP-x
FREQUENCY:60HZ
A1 SHORT CIRCUIT RATING: 5kA

MAIN SUPPLY SOURCE: LP-1
CAUTION
SCADA CONTROL PANEL WARNING
YELLOW WIRING MAY
BE ENERGIZED BY AN Q8
DISCONNECT OUTSIDE SOURCE
A6 POWER
By Appd YYYY.MM.DD
BEFORE WORKING
WITHIN
Revision
POWER UPS POWER
ON ON
W W PANEL A7
AC1 Ma
Q1 Q3 C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29

A10 B For Review ML/DM SSS 2021.12.03
PANEL
DIO1
PS1
DC1
PS2
UPS-x REC2 ML/DM SSS SSS 2020.12.18

File Name: 165620209-EI501
B2 Dwn. Dsgn. YYYY.MM.DD
Chkd.
Q2 PANEL
Permit/Seal
AC2
1143mm
SPD
[45,0"]
Md
Q6
B FS1
PANEL
PANEL
PANEL
FIELD
FIELD
Me
Q7 Mc Q5
Client/Project Logo
A10
Q4 A7
A2 Mb
A10
B1
A10
Client/Project
REC01
A7 A7 A7 A10 A7 The Coorporation of the
Town of Amherstburg
A11
SCADA Upgrades
\\cd1223-f01\01656\active\165620209\design\drawing\electrical\165620209-ei501

A
Title
SCADA Control Panel
General Arrangment
Project No. Scale

165620209
2022.05.03 11:17:54 AM

of
EI-501
1 2 3 4 5
Bill of Material: Panel Components Bill of Material: Connection Components

Bill of Material: PLC
Item Tags Qty. Description Specification Item Tags Qty. Description Specification
A1 SCP1 1 Stainless Steel Freestanding Enclosure - TYPE 4X Hammond MFG. Rittal Q1 AC1 2 End Bracket Phoenix Contact Weidmuller
SCP-1 SCP-2 SCP-3 SCP-4 Spare Description Specification
SCP2 Single Door c/w Handle & Inner Backplate HW483616GYHK 8084.000 - Enclosure Gray, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000) 1 1 1 1 5069 CompactLogix Dual Port Ethernet / IP Adapter, Allen Bradley
SCP3 72"x36"x18" (HxWxD) 18P4533 8184.245 - Side Panels 1 Spacer Plate Phoenix Contact Weidmuller RJ45 Cable connector 5069-AENTR
SCP4 8618.200 - Handle Gray DP-UTTB 2.5/4 (3047303) WEW 35/1, WM, BG Stantec Consulting Ltd.
2484.000 - Lock (1059000000) 1 1 1 1 5069 CompactLogix PLC Allen Bradley 171 Queens Avenue, 6th Floor
8084.000 - Backplate Digital DC Input module 5069-IB16 London ON N6A 5J7
1 End Cover Phoenix Contact Weidmuller
A2 PK1 1 Literature Pocket Hammond MFG. Rittal 24 VDC 16 Inputs Tel: 519.645.2007
Gray DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N
PKT99 2513.000 www.stantec.com
(1084000000) 2 1 3 3 5069 CompactLogix PLC Allen Bradley
A3 LT 1 LED Panel Light 12", 120VAC Hammond MFG. Rittal Digital AC Input Module 5069-IA16
As Feed-Thru / Ground, 2-Level Modular Terminal Block Phoenix Contact Weidmuller Copyright Reserved
FLK7LED 2500.300 120VAC 16 Inputs
D Req. Gray / Beige, 30A/800V, #26-10AWG UTTB 4-PE/L (3044746) WDK 4N, DU-PE, Ground The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
A4 ZS 1 Remote Door Switch Hammond MFG. Rittal Block (1041925000) 1 1 1 2 5069 CompactLogix PLC Allen Bradley - any errors or omissions shall be reported to Stantec without delay.
FLKDS 4127.010
Digital AC Relay Output module 5069-OW16 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
A5 HT 1 Fan Heater with Thermostat Hammond MFG. Rittal 120VAC/24VDC 16 Relay Outputs use for any purpose other than that authorized by Stantec is forbidden.
CBxxx As Branch Circuit Breaker (UL489/CSA C22.2 No.5) Weidmuller
120VAC, 200W FLHTF200A115 3105.410 - Heater
Req. 120Vac/60Vdc, 1P, 5kAIR, Curve B, BR Series Legend
3110.000 - Thermostat
Rating as indicated 2 2 3 2 5069 CompactLogix PLC Allen Bradley
A6 ON 1 White LED Pilot Light AB Analog Input module 5069-IF8
Standard, NEMA 4/13 800T-QBTH2W Q2 AC2 3 End Bracket Phoenix Contact Weidmuller
Gray, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000) 8 Differential Inputs
30.5mm
12-130VAC/VDC Full Volt 1 Spacer Plate Phoenix Contact Weidmuller
Glass lens Gray DP-UTTB 2.5/4 (3047303) WEW 35/1, WM, BG 1 1 1 1 5069 CompactLogix PLC Allen Bradley
A7 Wiring Duct As Panduit (1059000000) Analog Output module 5069-OF8
1.75"W x 3.12"H, Slot Width 0.31"
Req. Grey c/w Cover (C1.5LG6) G1.5X3LG6 8 Voltage/Current Outputs
1 End Cover Phoenix Contact Weidmuller
2.25"W x 3.12"H, Slot Width 0.31" G2x3LG6 Gray DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N
Grey c/w Cover (C2LG6) G3x3LG6 1 1 1 1 1 5069 CompactLogix PLC Allen Bradley
(1084000000)
3.25"W x 3.12"H, Slot Width 0.31" Field Potential Distributor 5069-FPD
As Feed-Thru / Ground, 2-Level Modular Terminal Block Phoenix Contact Weidmuller 120VAC SA Power
Grey c/w Cover (C3LG6) Req. Gray / Beige, 30A/800V, #26-10AWG UTTB 4-PE/L (3044746) WDK 4N, DU-PE, Ground Notes
A8 Noise Shield As EMI Noise Shield Kit Panduit Block (1041925000) 1 1 1756 ControlLogix PLC Allen Bradley
Req. 3" Height wiring duct, SD3EMI
3MB Controller 1756-L81E
Bonding clip, and anti-oxidizing paste CBxxx As Branch Circuit Breaker (UL489/CSA C22.2 No.5) Weidmuller
A9 Support As Support bracket - TST Series Weidmuller Req. 120Vac/60Vdc, 1P, 5kAIR, Curve B, BR Series
Brackets Req. Height 2.7" 7924270070 Rating as indicated 1 1 1756 ControlLogix PLC Allen Bradley
Max spacing 300mm SPD01 1 Type 2/3 Pluggable Surge Protection Device Phoenix Contact Weidmuller Ethernet / IP Adapter 1756-EN2T
A10 DIN Rail As DIN Rail Perforated Phoenix Contact Integrated surge-proof fuse w/ indication contact, PLT-SEC-T3-120-FM-UT 6720005416
Req. NS 35/7,5 1210019 DIN-Rail mounted 1 1 1756 ControlLogix PLC Allen Bradley
A11 Ground Bar 1 10 TAP, Length 4.609" ILSCO 120Vac, 5kA, 26A 4 Slot Chassis 1756-A4
Ground Aluminum Bus NBAE-0410-1 Q3 Ma 2 End Bracket Phoenix Contact Weidmuller
1 1 1756 ControlLogix PLC Allen Bradley
Ext. FS1 1 Fold Down Shelf Hammond MFG. Rittal Q4 Mb Gray, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
75W, 120VAC Power Supply 1756-PA72
FDS1212GY 4120.000 Q5 Mc 1 Spacer Plate Phoenix Contact Weidmuller
Gray DP-UTTB 2.5/4 (3047303) WEW 35/1, WM, BG 1 1756 ControlLogix PLC Allen Bradley
(1059000000) FactoryTalk Historian Machine, 2GB 1756-HIST2G
C 1 End Cover Phoenix Contact Weidmuller
(1084000000)
16 Disconnect / Feed-Thru, 2-Level Modular Terminal Block Phoenix Contact Weidmuller
Gray, 30A/500V, #26-10AWG UTTB 4-MT (3044775) WDK 2.5/TR-DU, 24A
(1247290000)
Bill of Material: Electrical Components Q6 Md 2 End Bracket Phoenix Contact Weidmuller
Gray, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
Item Tags Qty. Description Specification 1 Spacer Plate Phoenix Contact Weidmuller
Gray DP-UTTB 2.5/4 (3047303) WEW 35/1, WM, BG
B1 REC1 1 Compact Receptacle Weidmuller (1059000000)
120VAC, 15A, 2-15R 7940084720 1 End Cover Phoenix Contact Weidmuller By Appd YYYY.MM.DD
DIN-Rail Mounted Revision
B2 PS1 1 24VDC Power Supply Phoenix Contact Weidmuller (1084000000)
PS2 240W - 24VDC, 10A Quint PRO TOP1 4 Feed-Thru / Ground, 2-Level Modular Terminal Block Phoenix Contact Weidmuller
Gray / Beige, 30A/800V, #26-10AWG UTTB 4-PE/L (3044746) WDK 4N, DU-PE, Ground
DIO1 1 24VDC Redundancy Module Phoenix Contact Block (1041925000) C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
2x20A/1x40A Quint-Diode
8 Disconnect / Feed-Thru, 2-Level Modular Terminal Block Phoenix Contact Weidmuller A For Review ML/DM SSS 2021.09.20
CBxxx As Branch Circuit Breaker (UL489/CSA C22.2 No.5) Weidmuller
Gray, 30A/500V, #26-10AWG UTTB 4-MT (3044775) WDK 2.5/TR-DU, 24A Issued By Appd YYYY.MM.DD
Req. 120Vac/60Vdc, 1P, 5kAIR, Curve B, BR Series
(1247290000)
Rating as indicated
8 Fused / Feed-Thru, 2-Level Modular Terminal Block Phoenix Contact Weidmuller File Name: 165620209-EI502 ML/DM SSS SSS 2020.12.18
2 End Bracket Phoenix Contact Weidmuller
Black, 30A/24V, #26-10AWG UT 4-L/HESILED 24 KDKS 1EN/LLC 10-36V Dwn. Dsgn. Chkd. YYYY.MM.DD
Gray, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
Fuse G / 5x20, GLASS, 100mA (3214366) AC/DC (9802720001)
1 Spacer Plate Phoenix Contact Weidmuller Permit/Seal
Q7 Me 2 End Bracket Phoenix Contact Weidmuller
Gray, 9.5mm E/NS 35 N (0800886) WEW 35/2 (1061200000)
(1059000000)
Weidmuller 1 Spacer Plate Phoenix Contact Weidmuller
1 End Cover Phoenix Contact
B (1084000000)
(1059000000)
As Weidmuller 1 End Cover Phoenix Contact Weidmuller

Feed-Thru / Ground, 2-Level Modular Terminal Block Phoenix Contact
Req. Gray / Beige, 30A/800V, #26-10AWG WDK 4N, DU-PE, Ground Gray DP-UTTB 2.5/4 (3047293) WAP/WDK 2.4/4N
UTTB 4-PE/L (3044746)
(1084000000)
Block (1041925000)
8 Disconnect / Feed-Thru, 2-Level Modular Terminal Block Phoenix Contact Weidmuller
EXT. UPS1 1 Uninterruptible Power Supply Eaton
Gray, 30A/500V, #26-10AWG UTTB 4-MT (3044775) WDK 2.5/TR-DU, 24A
c/w Optional Relay Communication card (RELAY-MS) 9SX1500
(1247290000)
120VAC Output
Output 6-15R, Receptacles, 4 2-Level Ground Terminal Block Phoenix Contact Weidmuller
1500VA/135W, 120VAC Input Green Yellow, 26-10AWG (3044759) WDK 4N PE
EXT. REC2 1 Duplex Receptacle
(1041920000) Client/Project Logo
CSA Type 5-15R, 125V, 15A Q8 PP-x As Copper Patch Panel Package Belden
Surface Mount Req. 4 Port CAT6 Ethernet Module (shielded), DIN-rail MIPP-01-024 EN
EXT. OIT1 1 Operator Interface Touch Screen AB mounted
9" Colour, 24VDC 2713P-T9WD1
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
SCADA Control Panel
Bill of Material
Project No. Scale

165620209
2022.05.03 11:18:00 AM

of
EI-502
1 2 3 4 5
AC1

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
DIO1
D
PS1
DC1
PS2
Legend
Notes
AC2
24VDC DISTRIBUTION TERMINAL BLOCKS
SPD SCALE 1:1
Ma Mb
C

File Name: 165620209-EI503 ML/DM SSS SSS 2020.12.18

Permit/Seal
DISCRETE INPUT 120VAC TERMINAL BLOCKS DISCRETE INPUT 24VDC TERMINAL BLOCKS
SCALE 1:1 SCALE 1:1
B
Md
Mc
Client/Project Logo
Me
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
SCADA Control Panel
Terminal Block
DISCRETE OUTPUT TERMINAL BLOCKS ANALOG OUTPUT TERMINAL BLOCKS ANALOG INPUT TERMINAL BLOCKS
120VAC DISTRIBUTION TERMINAL BLOCKS SCALE 1:1 SCALE 1:1 SCALE 1:1 General Arrangment
SCALE 1:1
Project No. Scale
165620209
2022.05.03 11:18:24 AM

of
EI-503
1 2 3 4 5
Source TAG + PORT ID

Destination TAG +PORT ID (Subistute Device Tag if direct
to a communicating device)
Example 1:
COM-101:EPP01-PORT01 (Source) 171 Queens Avenue, 6th Floor
MCC-201:EPP01-PORT01 (Destination) London ON N6A 5J7
Example 2: Tel: 519.645.2007
COM-101:EPP01-PORT01 (Source) www.stantec.com
PMP-201 (Destination)
Copyright Reserved
STRUCTURED WIRING LABEL - any errors or omissions shall be reported to Stantec without delay.
2 ROW LABEL, INSTALLED AND READABLE FROM FRONT OF PANEL. The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
INSTALLED WITHIN 50mm OF CABLE END.
Legend
Equipment ID(Tag, Field Communicating

Device)
Example 1:
PMP-101
Notes
INTERNAL PANEL PATCH CABLE LABEL
1 ROW LABEL, INSTALLED AND READABLE FROM FRONT OF PANEL. INSTALLED
WITHIN 50mm OF CABLE END.
1. Panel is wall mounted, top of panel shall be mounted at
~2000mm.
864,7mm 2. 24VDC power to be fed from SCP-1.
[34,0"]
Bill of Materials
Tags Qty. Description Specification

C COM-2 1 Communication Cabinet Tripp Lite
Heavy-Duty, Side Mounting Wall-Mount Rack Enclosure SRW18UHD
19" Tapped Panel Rails
622,6mm
As Strain Relief Bars Panduit

[24,5"]
reqd. 19" Rack Mounted SRBWCY

CSM-1 1 Horizontal Cable Storage Manager Neat-Patch
19" Rack Mounting, 2U High NP2 Cable Storage
Enclosure & Lid Enclosure & Lid
1 Fixed 4-Post Server Rack Cabinet Shelf Tripp Lite

Adjustable Mounting Depth SRSHELF4PHD
250lbs Capacity
1 Fixed 2-Post Server Rack Cabinet Shelf Tripp Lite

12" Deep SRSHELF2P1UTM
30lbs Capacity
EPP-1 1 Metal Shielded Ethernet Patch Panels Tripp Lite A For Review ML/DM SSS 2021.09.20
Category 6, RJ45 N252-048-SH-K By YYYY.MM.DD
48-Port, 1RU Issued Appd
NSW-1 1 Layer 2 Switch RuggedCom

625,1mm NSW-2 19" Rack Mounting RST2228
[24,6"] Dwn. Dsgn. Chkd. YYYY.MM.DD
120Vac Power Supply, Pluggable Terminal Block SFP1122-1SX
24-10/100/1000Mbs TX RJ45 Ports
4-1/10Gbs TX RJ45 Ports Permit/Seal
REC-1 EPP-1 REC-1 1 Power Distribution Unit Tripp Lite
13 Outlets, 2.4kW, 120VAC, 5-15/20R PDU1220
NAS-1 19" Rack Mounting
CSM-1 Wiring duct UPS-1 1 Uninterruptible Power Supply Eaton
B c/w Optional Relay Communication card (RELAY-MS) 9SX2000
120VAC Output
RTR-1 Output 6-15R, Receptacles,
NSW-1
2000VA/1800W, 120VAC Input
VOIP-1 *UPS-5 1 Uninterruptible Power Supply Eaton
NSW-2 c/w Optional Relay Communication card (RELAY-MS) 9SX700
Fixed Shelf 120VAC Output
Output 6-15R, Receptacles,
700VA/630W, 120VAC Input
RTR-1 1 Ethernet/IP Adapter to Modbus TCP/IP Server Anybus Client/Project Logo
AB7632
HIST-SE 1 Tower Server See specification

7.87"x18.07"x26.12" 405000.2.2
936,7mm
HMI-1 1 Workstation, Small Form Factor See specification

[36,9"]
*HMI-2 3.65"x11.53"x11.42" 405000.2.1

NAS-1 1 Network Attached Storage System See specification
1U High 405000.2.3
VOIP-1 1 Phone Modem See specification
Voice over IP 405000.2.1
Client/Project
* denotes installed outside of cabinet. See drawing E-115.
Town of Amherstburg
HIST-SE
SCADA Upgrades
UPS-1
HMI-1
A
Title
Communication Panel COM-2
Fixed Shelf Fixed Shelf
General Arrangment &
Bill of Material
Project No. Scale
165620209
2022.05.03 11:18:34 AM

COMMUNICATION CABINET LAYOUT

SCALE 1:5
of
EI-511
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
Legend
BILL OF MATERIALS
A1 1 Painted Steel Wallmounted Enclosure - CSA 4X Hammond MFG.

Single Door c/w Handle HW24206GYHK
24"x20"x6"
A2 1 Operator Interface Touch Screen AB
9" Colour, 24VDC 2713P-T9WD1
Notes
1. Provide terminal blocks for power distribution in OIT panel
from Scada Panel SCP-3.
100mm
C
BILL OF MATERIALS
150mm ITEM QTY DESCRIPTION SPECIFICATION
A1 As req. Copper Patch Panel Package Belden

4 Port CAT6 Ethernet Module (shielded), DIN-rail MIPP-01-024 EN
mounted
A2 As req. Copper Patch Panel Package Belden
2 Port CAT6 Ethernet Module (shielded), DIN-rail MIPP-01-024 EN
mounted *special order, 2 port
A3 As req. Single Gang PVC Device Box ABB
E381DWR
OIT-1 A1 A4 As req. 2 Port PVC Faceplate for Outlet Box Panduit
NK2FNWH
A5 As req. CAT6 RJ45 Jack Module, where xx is the VLAN Panduit
colour four per WAO CJ688TGxx Revision By Appd YYYY.MM.DD
A6 As req. CAT6 RJ45 1-Port Coupler Module Panduit
CC6X88IW
A2
100mm

Permit/Seal
4 PORT WORK 2 PORT WORK 2 PORT WORK 1 PORT SURFACE MOUNT

A OIT PANEL DETAIL
AREA OUTLET (WAO) AREA OUTLET (WAO) AREA OUTLET (WAO) WORK AREA OUTLET (WAO)
1:5 B C D E Client/Project Logo
1:2 1:2 1:2 1:2
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
OIT Panel & WAO
General Arrangement &
Bill of Materials
Project No. Scale
165620209
2022.05.03 11:18:41 AM

of
EI-521
1 2 3 4 5
Bill of Material: Panel Components
Item Tags Qty. Description Specification

A1 RTU-1 1 Stainless Steel Wallmount Enclosure - TYPE 4X Hammond MFG. Rittal
Single Door c/w Handle EN4SD302412SS 1376.000 - Enclosure Stantec Consulting Ltd.
30"x24"12" (HxWxD) 171 Queens Avenue, 6th Floor
London ON N6A 5J7
A2 BP-1 1 Existing Backplane and Components N/A Tel: 519.645.2007
Relocated from GCP-1 (RTU-WTP) www.stantec.com
Copyright Reserved
Legend
609,6mm
[24,0"] Notes
1. Existing backplane shown, located inside GCP to be
relocated into new enclosure inside SCADA room as shown
on plan drawings.
2. RTU-1 and SCP-1 to share UPS power from UPS-1.
305,2mm
[12,0"]

MANUFACTURE OF PANEL.
MANUFACTURE ADDRESS, TELEPHONE, EMAIL ADDRESS.
CONTRACT NUMBER, PO NUMBER.
ENGINEERING CONTACT NUMBER IF DIFFERENT THAN CONTRACT
NUMBER.
WARNING
RTU-1
RTU CONTROL PANEL DISCONNECT
VOLTAGE: 120VAC 1-PH
POWER
CURRENT: 15A BEFORE WORKING
FREQUENCY:60HZ
SHORT CIRCUIT RATING: 5kA WITHIN
MAIN SUPPLY SOURCE: LP-1
CAUTION C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29

DANGER
THIS UNIT FED

RTU-1 YELLOW WIRING MAY
BE ENERGIZED BY AN
OUTSIDE SOURCE
B
A
For Review
For Review
ML/DM
ML/DM
SSS
SSS
2021.12.03
2021.09.20
BY UPS
POWER Issued By Appd YYYY.MM.DD
RTU CONTROL PANEL
[30,0"]
762mm
Permit/Seal
Client/Project Logo
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
RTU Control Panel
General Arrangment &
Bill of Materials
Project No. Scale
165620209
2022.05.03 11:18:53 AM

of
EI-531
1 2 3 4 5
FXO PORT
MODEM
WAVEDIRECT LTE
ISP POE MODEM Stantec Consulting Ltd.
COM-2
London ON N6A 5J7
SCADA Room Control Room Tel: 519.645.2007
www.stantec.com
POWER METER
AHF-1
Copyright Reserved
D (SWB-1) The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
EN2
EN2
AUTOMATIC HARMONIC FILTER - any errors or omissions shall be reported to Stantec without delay.
Legend
HIST-SE VOIP-1 HMI-1 NAS-1 HMI-2
Windows Server, GrandStream Windows 11 Pro, Windows 11 Pro,
2019 LTSC, UCM6202 FTView SE Station FTView SE Station
FT Historian SE Networked, Networked,
FT View Client, RTU-WTP FTView Client,
X2TERM01
Win-911 Win-911
RTU-1
MBTCP
MBTCP
HMI
RTR-1 SCADA Room
Ethernet/IP
X8TERM02
Adapter to Modbus
TCP/IP Server
MBTCP
PLC
HMI
HMI
HMI
HMI
Notes
NWS-1 & NSW-2 1. PLC-1: ControlLogix 1756 PLC.
2. RIO-1/2/3/4: CompactLogix 5000 Series Adapter and IOs.
3. HMI-1: FactoryTalk View SE Local Application.
4. HISTORIAN-1: FactoryTalk Historian Site Edition.
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
PLC
5. OIT-1/2: Allen Bradley PanelView Plus 6.
HMI
HMI
HMI
HMI
6. See EI-602 for VLAN schedule.
RIO-1 PLC-1 RIO-3 By Appd YYYY.MM.DD

Revision

SCP-1 SCP-3 B For Review ML/DM SSS 2021.12.03
SCADA Room Pipe Gallery A For Review ML/DM SSS 2021.09.20

RIO-2 RIO-4
Permit/Seal
B
SCP-2 SCP-4
Lift Lift Area Pipe Gallery
TS-1/FVNR CS-1/FVNR
Client/Project Logo
OIT-1
FILTER GALLERY LL-1/VFD LL-3/VFD HL-2/VFD WW-6/VFD CR-1/VFD CMP-1/VFD CMP-3/VFD CMP-5/VFD
MCC-1
OIT-2
PIPE GALLERY LL-2/VFD HL-1/VFD HL-3/VFD CMP-2/VFD CMP-4/VFD CMP-6/VFD
Client/Project
Town of Amherstburg
SCADA Upgrades

A
Title
Network Architecture
Project No. Scale

165620209
2022.05.03 11:19:02 AM

of
EI-601
1 2 3 4 5
FXO PORT
MODEM
EN1
London ON N6A 5J7
Tel: 519.645.2007
SERVER HMI HMI NAS RTR RTR VOIP
www.stantec.com
10.1.3.2 10.1.3.3 10.1.3.4 10.1.3.254 10.1.4.254 10.1.7.2 10.1.3.253
COM-01 Copyright Reserved
D HIST-SE HMI-1 HMI-2 NAS-1 RTR-1/P1 RTR-1/P2 VOIP-1
EN2
EN2
EN2
EN2
EN2
EN2
EN2
WINDOWS SERVER WINDOWS 11 PRO WINDOWS 11 PRO NETWORK ATTACHED ETHERNET/IP ADAPTER VOICE OVER IP
STORAGE TO MODBUS TCP/IP CONTROLLER The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
FO
SERVER use for any purpose other than that authorized by Stantec is forbidden.
NSW-1
1-1000FX Legend
24-10/100/1000TX
SFP/LC HMI HMI HMI HMI PLC MBTCP HMI
A1 3 6 9 12 15 18 20
ETHERNET
SWITCH 1
1 2 4 5 7 8 10 11 13 14 16 17 19 21 22 23 24
PLC PLC HMI HMI PLC DIS PLC DIS HMI PLC DIS HMI MBTCP MBTCP PLC PLC PLC
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EPP-1 Notes
48-RJ45
PLC PLC HMI HMI PLC DIS PLC DIS HMI PLC DIS HMI MBTCP MBTCP PLC PLC PLC DIS DIS DIS DIS DIS DIS DIS
ETHERNET 1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
PATCH PANEL
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
SCP-1 SCP-2 SCP-3 OIT-2 SCP-4 OIT-1 SWB-1 AHF-1 MCP-1 MCP-2 MCP-3
WAO-1 WAO-2 WAO-3 WAO-4 WAO-5 WAO-6 WAO-7 WAO-8 WAO-9 WAO-10 WAO-11
PLC PLC HMI HMI PLC DIS PLC DIS HMI PLC DIS HMI MBTCP MBTCP PLC PLC PLC
1 2 3 4 1 2 1 2 1 1 2 1 1 1 1 1 1
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
E-601:B2 E-601:A1 E-601:A1 E-601:A2 E-601:A2
DIS DIS DIS
C 1 1 1
RIO PLC PLC PLC RIO RIO OIT RIO OIT CM AHF VFD VFD VFD
10.1.4.3 10.1.4.2 10.1.3.20 10.1.3.21 10.1.4.4 10.1.4.5 10.1.3.6 10.1.4.6 10.1.3.5 10.1.7.3 10.1.7.4 10.1.4.10 10.1.4.11 10.1.4.12
RIO-1 PLC-1/S0 PLC-1/S1 PLC-1/S3 RIO-2 RIO-3 OIT-2 RIO-4 OIT-1 SWB-1/CM AHF-1 LL-1 LL-2 LL-3
POWER AUTOMATIC LOW LIFT LOW LIFT LOW LIFT
METER HARMONIC FILTER PUMP 1 PUMP 2 PUMP 3
NSW-2
1-1000FX
SFP/LC
24-10/100/1000TX C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
A1
ETHERNET B For Review ML/DM SSS 2021.12.03
SWITCH 2 A For Review ML/DM SSS 2021.09.20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Issued By Appd YYYY.MM.DD
PLC PLC PLC PLC PLC PLC PLC DIS PLC PLC PLC PLC PLC PLC DIS DIS DIS DIS DIS DIS DIS DIS DIS DIS
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
Permit/Seal
PLC PLC PLC PLC PLC PLC PLC DIS PLC PLC PLC PLC PLC PLC DIS DIS DIS DIS DIS DIS DIS DIS DIS DIS
1
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
B
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
EN1
MCP-5 MCP-6 MCP-7 MCP-9 MCC-1
WAO-12 WAO-13 WAO-14 WAO-15 WAO-16 WAO-17 WAO-18 WAO-19 WAO-20 WAO-21
PLC PLC PLC PLC PLC PLC PLC PLC PLC PLC PLC PLC PLC
1 1 1 1 1 1 1 1 2 1 2 1 2
EN2
EN2
EN2
EN2
EN2
EN2
EN2
EN1
EN1
EN1
EN1
EN1
EN1
Client/Project Logo
E-601:A3 E-601:A3 E-601:A3 E-601:A4 E-602:2D 1F CMP-1 CMP-3 CMP-5
VFD VFD VFD VFD FVNR VFD VFD VFD

CABLE SCHEDULE
10.1.4.13 10.1.4.14 10.1.4.15 10.1.4.16 10.1.4.18 10.1.4.20 10.1.4.22 10.1.4.24
HL-1 HL-2 HL-3 WW-6 CS-1 CMP-1/VFD CMP-3/VFD CMP-5/VFD TAGS DESCRIPTION
HIGH LIFT LOW LIFT HIGH LIFT WASH WATER CLARIFIER CLARIFIER POLYMER FILTER POLYMER ALUM
PUMP 2 PUMP 2 PUMP 3 PUMP 6 SCRAPER E-602:2D METERING PUMP 1 METERING PUMP 1 METERING PUMP 1 EN1 Ethernet CAT6e armored, shielded, 600V rated insulation,
E-602:2D 2K 1M CMP-2 CMP-4 CMP-6 Belden 127953A (4/P, #24AWG, Cu, SHD, 600V, PVC,
AL-ARM)
FVNR VFD VFD VFD VFD Client/Project
EN2 Ethernet CAT6e patch cord, length to suit (4/P, #24AWG,
10.1.4.17 10.1.4.19 10.1.4.21 10.1.4.23 10.1.4.25
Cu, PVC) The Coorporation of the
TS-1
TRAVELLING
CR-1
CLARIFIER
CMP-2/VFD
CLARIFIER POLYMER
CMP-4/VFD
FILTER POLYMER
CMP-6/VFD
ALUM
Town of Amherstburg
FO Fibre Optic patch cord, length to suit (LC, MM, 1G)
SCREEN RECIRCULATOR METERING PUMP 2 METERING PUMP 2 METERING PUMP 2
SCADA Upgrades
Amherstburg WTP VLANs 415 Front Rd N., Amherstburg, ON, N9V 2V5
A VLAN Description Subnet Subnet Mask
Title
NET Network Management 10.1.1.1 255.255.255.0
MNT Maintenance 10.1.2.1 255.255.255.0

Network Schematic
HMI SCADA Servers, & View Nodes 10.1.3.1 255.255.255.0
PLC SCADA Servers, & Control Devices 10.1.4.1 255.255.255.0

Project No. Scale
EMS Energy Monitoring System 10.1.5.1 255.255.255.0
165620209
2022.05.03 11:19:14 AM
VOIP Voice Over IP 10.1.6.1 255.255.255.0

MBTCP Modbus TCP 10.1.7.1 255.255.255.0

of
EI-602
1 2 3 4 5
Module Point Address Type Variable Description Comments Module Point Address Type Variable Description Comments
1 00 RIO-1:1:I.Pt00.Data DI PS1_XA Power Supply 1 Alarm 6 08 RIO-1:6:I.Pt08.Data DI - Spare
1 01 RIO-1:1:I.Pt01.Data DI PS2_XA Power Supply 2 Alarm 6 09 RIO-1:6:I.Pt09.Data DI - Spare 171 Queens Avenue, 6th Floor
London ON N6A 5J7
1 02 RIO-1:1:I.Pt02.Data DI UPS_PFR UPS Utility Power Fail Alarm 6 10 RIO-1:6:I.Pt10.Data DI - Spare Tel: 519.645.2007
www.stantec.com
1 03 RIO-1:1:I.Pt03.Data DI UPS_FLT UPS Battery Low Alarm 6 11 RIO-1:6:I.Pt11.Data DI - Spare
Copyright Reserved
D 1 04 RIO-1:1:I.Pt04.Data DI UPS_XA UPS General Alarm 6 12 RIO-1:6:I.Pt12.Data DI - Spare The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
1 05 RIO-1:1:I.Pt05.Data DI ATS_EAH1 Utility Power Status 6 13 RIO-1:6:I.Pt13.Data DI - Spare The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
1 06 RIO-1:1:I.Pt06.Data DI ATS_EAH2 Generator Power Status 6 14 RIO-1:6:I.Pt14.Data DI - Spare
Legend
1 07 RIO-1:1:I.Pt07.Data DI ATS_JIS1 Utility Power Connected 6 15 RIO-1:6:I.Pt15.Data DI - Spare
1 08 RIO-1:1:I.Pt08.Data DI ATS_JIS2 Generator Power Connected
1 09 RIO-1:1:I.Pt09.Data DI ATS_XA ATS General Alarm
1 10 RIO-1:1:I.Pt10.Data DI ATS_YN ATS Auto Status
1 11 RIO-1:1:I.Pt11.Data DI GEN_MN Generator Running Status
1 12 RIO-1:1:I.Pt12.Data DI GEN_XA Generator General Alarm
1 13 RIO-1:1:I.Pt13.Data DI GEN_LAL Generator Low Fuel Alarm Notes

1 14 RIO-1:1:I.Pt14.Data DI GEN_YN Generator Auto Status
1 15 RIO-1:1:I.Pt15.Data DI - Spare
2 00 RIO-1:2:O.Pt00.Data DO WT1COM_YC1 Communication Source - Cellular
2 01 RIO-1:2:O.Pt01.Data DO WT1COM_YC2 Communication Source - Dialup
2 02 RIO-1:2:O.Pt02.Data DO WT1PT1_YC1 Water Tower Level Source - PT-1
2 03 RIO-1:2:O.Pt03.Data DO WT1PT2_YC2 Water Tower Level Source - PT-2
2 04 RIO-1:2:O.Pt04.Data DO - Spare
C 2 06 RIO-1:2:O.Pt06.Data DO - Spare
2 13 RIO-1:2:O.Pt13.Data DO - Spare Revision By Appd YYYY.MM.DD
3 00 RIO-1:3:I.Pt00.Data AI AIT6_AI Clarifier Effluent Turbidity C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
3 01 RIO-1:3:I.Pt01.Data AI AIT7_AI Plant Effluent Turbidity A For Review ML/DM SSS 2021.09.20

3 02 RIO-1:3:I.Pt02.Data AI AIT8_AI Raw Water Chlorine Analyzer
3 03 RIO-1:3:I.Pt03.Data AI AIT10_AI1 Filter Effluent Chlorine Analyzer File Name: 165620209-EI611 ML/DM SSS SSS 2020.12.18
3 04 RIO-1:3:I.Pt04.Data AI AIT11_AI1 Reservoir Chlorine Analyzer
3 05 RIO-1:3:I.Pt05.Data AI AIT12_AI Plant Effluent Chlorine Analyzer Permit/Seal

3 06 RIO-1:3:I.Pt06.Data AI LIT6_LI Alum Storage Tank 1 Level
3 07 RIO-1:3:I.Pt07.Data AI LIT7_LI Alum Storage Tank 2 Level
B
4 00 RIO-1:4:I.Pt00.Data AI AIT10_AI2 Filter Effluent pH Analyzer
4 01 RIO-1:4:I.Pt01.Data AI AIT11_AI2 Reservoir pH Analayzer
4 02 RIO-1:4:I.Pt02.Data AI WT1_LI Water Tower Level
4 03 RIO-1:4:I.Pt03.Data AI - Spare
4 05 RIO-1:4:I.Pt05.Data AI - Spare Client/Project Logo

5 00 RIO-1:5:O.Pt00.Data AO - Spare
5 04 RIO-1:5:O.Pt04.Data AO - Spare Client/Project
Town of Amherstburg
5 07 RIO-1:5:O.Pt07.Data AO - Spare Amherstburg WTP Electrical &

SCADA Upgrades
6 01 RIO-1:6:I.Pt01.Data DI - Spare 415 Front Rd N., Amherstburg, ON, N9V 2V5

A
Title
RIO-1 IO Schedule
Project No. Scale
165620209
2022.05.03 11:19:22 AM

of
EI-611
1 2 3 4 5
1 00 RIO-2:1:I.Pt00.Data DI PS1_XA Power Supply 1 Alarm 6 07 RIO-2:6:I.Pt07.Data DI - Spare Stantec Consulting Ltd.
1 01 RIO-2:1:I.Pt01.Data DI PS2_XA Power Supply 2 Alarm 6 08 RIO-2:6:I.Pt08.Data DI - Spare London ON N6A 5J7
Tel: 519.645.2007
1 02 RIO-2:1:I.Pt02.Data DI UPS_PFR UPS Utility Power Fail Alarm 6 09 RIO-2:6:I.Pt09.Data DI - Spare www.stantec.com
1 03 RIO-2:1:I.Pt03.Data DI UPS_FLT UPS Battery Low Alarm 6 10 RIO-2:6:I.Pt10.Data DI - Spare
Copyright Reserved
D 1 04 RIO-2:1:I.Pt04.Data DI UPS_XA UPS General Alarm 6 11 RIO-2:6:I.Pt11.Data DI - Spare The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
1 05 RIO-2:1:I.Pt05.Data DI WT1_LAH Water Tower - High Water Level 6 12 RIO-2:6:I.Pt12.Data DI - Spare The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
1 06 RIO-2:1:I.Pt06.Data DI WT1_LAL Water Tower - Low Water Level 6 13 RIO-2:6:I.Pt13.Data DI - Spare
Legend
1 07 RIO-2:1:I.Pt07.Data DI WT1_YF Water Tower - Loss of Communication 6 14 RIO-2:6:I.Pt14.Data DI - Spare
1 08 RIO-2:1:I.Pt08.Data DI WT1PT1_XA Water Tower - PT-1 Failure 6 15 RIO-2:6:I.Pt15.Data DI - Spare
1 09 RIO-2:1:I.Pt09.Data DI WT1PT2_XA Water Tower - PT-2 Failure
1 10 RIO-2:1:I.Pt10.Data DI WT1MJ_XA Water Tower Major Alarm
1 11 RIO-2:1:I.Pt11.Data DI WT1MI_XA Water Tower Minor Alarm
1 13 RIO-2:1:I.Pt13.Data DI - Spare Notes

2 00 RIO-2:2:O.Pt00.Data DO TSV1_VH Travelling Screen Wash Solenoid Valve, Open Command
2 01 RIO-2:2:O.Pt01.Data DO HLS-C4_VH High Lift Control Valve, Open Command
2 02 RIO-2:2:O.Pt02.Data DO HLS-C4_VL High Lift Control Valve, Close Command
C
3 00 RIO-2:3:I.Pt00.Data AI LIT10_LI Inlet Well Raw Water Level B For Review ML/DM SSS 2021.12.03
3 01 RIO-2:3:I.Pt01.Data AI LDIT11A_LI Travelling Screen Well Raw Water Level Upstream
3 02 RIO-2:3:I.Pt02.Data AI LDIT11B_LI Travelling Screen Well Raw Water Level Downstream
3 03 RIO-2:3:I.Pt03.Data AI LIT12_LI Low Lift Pump Well Raw Water Level
3 04 RIO-2:3:I.Pt04.Data AI RWC1_ZI Raw Water Control Valve, Position Indication
3 05 RIO-2:3:I.Pt05.Data AI FIT1_FI Raw Water Flow Permit/Seal

3 06 RIO-2:3:I.Pt06.Data AI FT10_FI Alum Injection Flow
3 07 RIO-2:3:I.Pt07.Data AI AIT1_AI Raw Water Turbidity Analyzer

B
4 00 RIO-2:4:I.Pt00.Data AI FIT9_FI Plant Effluent Flow
4 01 RIO-2:4:I.Pt01.Data AI PIT8_PI Plant Effluent Pressure
4 05 RIO-2:4:I.Pt05.Data AI - Spare Client/Project Logo

5 00 RIO-2:5:O.Pt00.Data AO RWC1_ZC Raw Water Control Valve, Position Control
Client/Project
Town of Amherstburg
SCADA Upgrades
6 00 RIO-2:6:I.Pt00.Data DI RWC1_ZH Raw Water Control Valve, Opened Status

6 01 RIO-2:6:I.Pt01.Data DI RWC1_ZL Raw Water Control Valve, Closed Status
A
6 02 RIO-2:6:I.Pt02.Data DI HLS-C4_ZH High Lift Control Valve, Opened Status Title
6 03 RIO-2:6:I.Pt03.Data DI HLS-C4_ZL High Lift Control Valve, Closed Status RIO-2 IO Schedule
6 04 RIO-2:6:I.Pt04.Data DI LIT10_LOE Inlet Well Raw Water Level Loss of Echo
Travelling Screen Well Raw Water Level Upstream Loss
6 05 RIO-2:6:I.Pt05.Data DI LDIT11A_LOE
of Echo
Travelling Screen Well Raw Water Level Downstream Project No. Scale
6 06 RIO-2:6:I.Pt06.Data DI LDIT11B_LOE
Loss of Echo
165620209
2022.05.03 11:19:32 AM

of
EI-612
1 2 3 4 5
1 00 RIO-4:1:I.Pt00.Data DI PS1_XA Power Supply 1 Alarm 7 00 RIO-4:6:O.Pt00.Data DI CLB-C5_OS_ZSH Clarifier Bypass Control Valve, Opened Status Stantec Consulting Ltd.
1 01 RIO-4:1:I.Pt01.Data DI PS2_XA Power Supply 2 Alarm 7 01 RIO-4:6:O.Pt01.Data DI CLB-C5_CS_ZSL Clarifier Bypass Control Valve, Closed Status London ON N6A 5J7
Tel: 519.645.2007
1 02 RIO-4:1:I.Pt02.Data DI UPS_PFR UPS Utility Power Fail Alarm 7 02 RIO-4:6:O.Pt02.Data DI FE-C1_OS_ZSH Filter 1 Effluent Control Valve 1, Opened Status
www.stantec.com
1 03 RIO-4:1:I.Pt03.Data DI UPS_FLT UPS Battery Low Alarm 7 03 RIO-4:6:O.Pt03.Data DI FE-C1_CS_ZSL Filter 1 Effluent Control Valve 1, Closed Status
Copyright Reserved
D 1 04 RIO-4:1:I.Pt04.Data DI UPS_XA UPS General Alarm 7 04 RIO-4:6:O.Pt04.Data DI FE-C2_OS_ZSH Filter 2 Effluent Control Valve 1, Opened Status The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
1 05 RIO-4:1:I.Pt05.Data DI - Spare 7 05 RIO-4:6:O.Pt05.Data DI FE-C2_CS_ZSL Filter 2 Effluent Control Valve 1, Closed Status The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
1 06 RIO-4:1:I.Pt06.Data DI - Spare 7 06 RIO-4:6:O.Pt06.Data DI FI-C1_OS_ZSH Filter 1 Influent Control Valve, Opened Status
Legend
1 07 RIO-4:1:I.Pt07.Data DI - Spare 7 07 RIO-4:6:O.Pt07.Data DI FI-C1_OS_ZSL Filter 1 Influent Control Valve, Closed Status
1 08 RIO-4:1:I.Pt08.Data DI - Spare 7 08 RIO-4:7:I.Pt00.Data DI FI-C2_OS_ZSH Filter 2 Influent Control Valve, Opened Status
1 09 RIO-4:1:I.Pt09.Data DI - Spare 7 09 RIO-4:7:I.Pt01.Data DI FI-C2_OS_ZSL Filter 2 Influent Control Valve, Closed Status
1 10 RIO-4:1:I.Pt10.Data DI - Spare 7 10 RIO-4:7:I.Pt02.Data DI FE-C5_OS_ZSH Filter 1 Effluent Control Valve 2, Opened Status
1 11 RIO-4:1:I.Pt11.Data DI - Spare 7 11 RIO-4:7:I.Pt03.Data DI FE-C5_CS_ZSL Filter 1 Effluent Control Valve 2, Closed Status
1 12 RIO-4:1:I.Pt12.Data DI - Spare 7 12 RIO-4:7:I.Pt04.Data DI FE-C6_OS_ZSH Filter 2 Effluent Control Valve 2, Opened Status
1 13 RIO-4:1:I.Pt13.Data DI - Spare 7 13 RIO-4:7:I.Pt05.Data DI FE-C6_CS_ZSL Filter 2 Effluent Control Valve 2, Closed Status Notes
1 14 RIO-4:1:I.Pt14.Data DI - Spare 7 14 RIO-4:7:I.Pt06.Data DI FD-C5_OS_ZSH Filter 1 Discharge Control Valve, Opened Status
1 15 RIO-4:1:I.Pt15.Data DI - Spare 7 15 RIO-4:7:I.Pt07.Data DI FD-C5_CS_ZSL Filter 1 Discharge Control Valve, Closed Status
2 00 RIO-4:2:O.Pt00.Data DO CLB-C5_OC_VH Clarifier Bypass Control Valve, Open Command 8 00 RIO-4:7:I.Pt08.Data DI FD-C6_OS_ZSH Filter 2 Discharge Control Valve, Opened Status
2 01 RIO-4:2:O.Pt01.Data DO FE-C1_OC_VH Filter 1 Effluent Control Valve 1, Open Command 8 01 RIO-4:7:I.Pt09.Data DI FD-C6_CS_ZSL Filter 2 Discharge Control Valve, Closed Status
2 02 RIO-4:2:O.Pt02.Data DO FE-C2_OC_VH Filter 2 Effluent Control Valve 1, Open Command 8 02 RIO-4:7:I.Pt10.Data DI FJW-C9_OS_ZSH Filter 1 Jet Water Control Valve, Opened Status Filter (not in use currently)
2 03 RIO-4:2:O.Pt03.Data DO FI-C1_OC_VH Filter 1 Influent Control Valve, Open Command 8 03 RIO-4:7:I.Pt11.Data DI FJW-C9_CS_ZSL Filter 1 Jet Water Control Valve, Closed Status
2 04 RIO-4:2:O.Pt04.Data DO FI-C2_OC_VH Filter 2 Influent Control Valve, Open Command 8 04 RIO-4:7:I.Pt12.Data DI FJW-C10_OS_ZSH Filter 2 Jet Water Control Valve, Opened Status Filter (not in use currently)
2 05 RIO-4:2:O.Pt05.Data DO FD-C5_OC_VH Filter 1 Discharge Control Valve, Open Command 8 05 RIO-4:7:I.Pt13.Data DI FJW-C10_CS_ZSL Filter 2 Jet Water Control Valve, Closed Status
C 2 06 RIO-4:2:O.Pt06.Data DO FD-C6_OC_VH Filter 2 Discharge Control Valve, Open Command 8 06 RIO-4:7:I.Pt14.Data DI FMW-C1_OS_ZSH Filter 1 Wash Water Control Valve, Opened Status
2 07 RIO-4:2:O.Pt07.Data DO FJW-C9_OC_VH Filter 1 Jet Water Control Valve, Open Command 8 07 RIO-4:7:I.Pt15.Data DI FMW-C1_CS_ZSL Filter 1 Wash Water Control Valve, Closed Status
2 08 RIO-4:2:O.Pt08.Data DO FJW-C10_OC_VH Filter 2 Jet Water Control Valve, Open Command 8 08 RIO-4:8:I.Pt00.Data DI FMW-C2_OS_ZSH Filter 2 Wash Water Control Valve, Opened Status
2 09 RIO-4:2:O.Pt09.Data DO FMW-C1_OC_VH Filter 1 Wash Water Control Valve, Open Command 8 09 RIO-4:8:I.Pt01.Data DI FMW-C2_CS_ZSL Filter 2 Wash Water Control Valve, Closed Status
2 10 RIO-4:2:O.Pt10.Data DO FMW-C2_OC_VH Filter 2 Wash Water Control Valve, Open Command 8 10 RIO-4:8:I.Pt02.Data DI FJW-C13_OS_ZSH Jet Wash Water Control Valve, Opened Status Filter (not in use currently)
2 11 RIO-4:2:O.Pt11.Data DO - Spare 8 11 RIO-4:8:I.Pt03.Data DI FJW-C13_CS_ZSL Jet Wash Water Control Valve, Closed Status Filter (not in use currently)
2 12 RIO-4:2:O.Pt12.Data DO - Spare 8 12 RIO-4:8:I.Pt04.Data DI FMW-C14_OS_ZSH Wash Water Control Valve, Opened Status
2 13 RIO-4:2:O.Pt13.Data DO - Spare 8 13 RIO-4:8:I.Pt05.Data DI FMW-C14_CS_ZSL Wash Water Control Valve, Closed Status
2 14 RIO-4:2:O.Pt14.Data DO - Spare 8 14 RIO-4:8:I.Pt06.Data DI LIT13_LOE Filter Inlet Channel Level Loss of Echo
2 15 RIO-4:2:O.Pt15.Data DO - Spare 8 15 RIO-4:8:I.Pt07.Data DI - Spare

3 00 RIO-4:3:O.Pt00.Data AI LIT23_LE2_LI Filter 1 Level 9 00 RIO-4:8:I.Pt08.Data DI - Spare
LIT23_LE3_LI Spare A For Review ML/DM SSS 2021.09.20
3 01 RIO-4:3:O.Pt01.Data AI Filter 2 Level 9 01 RIO-4:8:I.Pt09.Data DI -
3 02 RIO-4:3:O.Pt02.Data AI FIT2_FI Filter 1 Effluent Flow 9 02 RIO-4:8:I.Pt10.Data DI - Spare
3 03 RIO-4:3:O.Pt03.Data AI FIT3_FI Filter 2 Effluent Flow 9 03 RIO-4:8:I.Pt11.Data DI - Spare
3 04 RIO-4:3:O.Pt04.Data AI PDIT1_PI Filter 1 Differential Pressure Indication 9 04 RIO-4:8:I.Pt12.Data DI - Spare
3 05 RIO-4:3:O.Pt05.Data AI PDIT2_PI Filter 2 Differential Pressure Indication 9 05 RIO-4:8:I.Pt13.Data DI - Spare Permit/Seal

3 06 RIO-4:3:O.Pt06.Data AI AIT2_AI Filter 1 Turbidity Analyzer 9 06 RIO-4:8:I.Pt14.Data DI - Spare
3 07 RIO-4:3:O.Pt07.Data AI AIT3_AI Filter 2 Turbidity Analyzer 9 07 RIO-4:8:I.Pt15.Data DI - Spare

B
4 00 RIO-4:3:O.Pt08.Data AI FE-C5_ZI Filter 1 Effluent Control Valve 2, Position Indication Filter (not in use currently) 9 08 RIO-4:9:I.Pt00.Data DI - Spare
4 01 RIO-4:3:O.Pt09.Data AI FE-C6_ZI Filter 2 Effluent Control Valve 2, Position Indication Filter (not in use currently) 9 09 RIO-4:9:I.Pt01.Data DI - Spare
4 02 RIO-4:3:O.Pt10.Data AI FIT6_FI Wash Water Flow 9 10 RIO-4:9:I.Pt02.Data DI - Spare
4 03 RIO-4:3:O.Pt11.Data AI FIT7_FI Jet Wash Water Flow 9 11 RIO-4:9:I.Pt03.Data DI - Spare
4 04 RIO-4:3:O.Pt12.Data AI FJW-C13_ZI Jet Wash Water Control Valve, Position Indication Filter (not in use currently) 9 12 RIO-4:9:I.Pt04.Data DI - Spare
4 05 RIO-4:3:O.Pt13.Data AI FMW-C14_ZI Wash Water Control Valve, Position Indication Filter (not in use currently) 9 13 RIO-4:9:I.Pt05.Data DI - Spare Client/Project Logo
4 06 RIO-4:3:O.Pt14.Data AI LIT13_LI Filter Inlet Channel Level Filter 9 14 RIO-4:9:I.Pt06.Data DI - Spare
4 07 RIO-4:3:O.Pt15.Data AI - Spare 9 15 RIO-4:9:I.Pt07.Data DI - Spare
Client/Project
Town of Amherstburg
Spare
5 07 RIO-4:4:I.Pt07.Data AI -
SCADA Upgrades
6 00 RIO-4:5:I.Pt00.Data AO FE-C5_ZC Filter 1 Effluent Control Valve 2, Position Control

6 01 RIO-4:5:I.Pt01.Data AO FE-C6_ZC Filter 2 Effluent Control Valve 2, Position Control
A
6 02 RIO-4:5:I.Pt02.Data AO FJW-C13_ZC Jet Wash Water Control Valve, Position Control
Title
6 03 RIO-4:5:I.Pt03.Data AO FMW-C14_ZC Wash Water Control Valve, Position Control
RIO-3 IO Schedule
6 04 RIO-4:5:I.Pt04.Data AO - Spare
Project No. Scale
165620209
2022.05.03 11:19:43 AM

of
EI-613
1 2 3 4 5
1 00 RIO-4:1:I.Pt00.Data DI PS1_XA Power Supply 1 Alarm 6 00 RIO-4:6:O.Pt00.Data AO FE-C7_ZC Filter 3 Effluent Control Valve 2, Position Control Stantec Consulting Ltd.
1 01 RIO-4:1:I.Pt01.Data DI PS2_XA Power Supply 2 Alarm 6 01 RIO-4:6:O.Pt01.Data AO FE-C8_ZC Filter 4 Effluent Control Valve 2, Position Control London ON N6A 5J7
Tel: 519.645.2007
1 02 RIO-4:1:I.Pt02.Data DI UPS_PFR UPS Utility Power Fail Alarm 6 02 RIO-4:6:O.Pt02.Data AO - Spare
www.stantec.com
1 03 RIO-4:1:I.Pt03.Data DI UPS_FLT UPS Battery Low Alarm 6 03 RIO-4:6:O.Pt03.Data AO - Spare
Copyright Reserved
D 1 04 RIO-4:1:I.Pt04.Data DI UPS_XA UPS General Alarm 6 04 RIO-4:6:O.Pt04.Data AO - Spare The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
1 05 RIO-4:1:I.Pt05.Data DI - Spare 6 05 RIO-4:6:O.Pt05.Data AO - Spare The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
1 06 RIO-4:1:I.Pt06.Data DI - Spare 6 06 RIO-4:6:O.Pt06.Data AO - Spare
Legend
1 07 RIO-4:1:I.Pt07.Data DI - Spare 6 07 RIO-4:6:O.Pt07.Data AO - Spare
1 08 RIO-4:1:I.Pt08.Data DI - Spare Clarifier - splice existing at entrance to pipe

7 00 RIO-4:7:I.Pt00.Data DI CLI-C1_ZSH Clarifier 1 Intake Control Valve, Opened Status
gallery
Clarifier - splice existing at entrance to pipe
7 01 RIO-4:7:I.Pt01.Data DI CLI-C1_ZSL Clarifier 1 Intake Control Valve, Closed Status
1 10 RIO-4:1:I.Pt10.Data DI - Spare gallery

7 02 RIO-4:7:I.Pt02.Data DI CLI-C2_ZSH Clarifier 2 Intake Control Valve, Opened Status
gallery
7 03 RIO-4:7:I.Pt03.Data DI CLI-C2_ZSL Clarifier 2 Intake Control Valve, Closed Status
1 13 RIO-4:1:I.Pt13.Data DI - Spare gallery Notes
1 14 RIO-4:1:I.Pt14.Data DI - Spare 7 04 RIO-4:7:I.Pt04.Data DI CBW-C1_ZSH Clarifier Backwash Control Valve, Opened Status
gallery
7 05 RIO-4:7:I.Pt05.Data DI CBW-C1_ZSL Clarifier Backwash Control Valve, Closed Status
gallery
2 00 RIO-4:2:O.Pt00.Data DO FCI-C9_ZCH Filter/Clarifier Inlet Control Valve, Open Command
7 06 RIO-4:7:I.Pt06.Data DI FCI-C9_ZSH Filter/Clarifier Inlet Control Valve, Opened Status
2 01 RIO-4:2:O.Pt01.Data DO FE-C3_ZCH Filter 3 Effluent Control Valve 1, Open Command
7 07 RIO-4:7:I.Pt07.Data DI FCI-C9_ZSL Filter/Clarifier Inlet Control Valve, Closed Status
2 02 RIO-4:2:O.Pt02.Data DO FE-C4_ZCH Filter 4 Effluent Control Valve 1, Open Command
7 08 RIO-4:7:I.Pt08.Data DI FE-C3_ZSH Filter 3 Effluent Control Valve 1, Opened Status
2 03 RIO-4:2:O.Pt03.Data DO FI-C3_ZCH Filter 3 Influent Control Valve, Open Command
7 09 RIO-4:7:I.Pt09.Data DI FE-C3_ZSL Filter 3 Effluent Control Valve 1, Closed Status
2 04 RIO-4:2:O.Pt04.Data DO FI-C4_ZCH Filter 4 Influent Control Valve, Open Command
2 05 RIO-4:2:O.Pt05.Data DO FD-C7_ZCH Filter 3 Discharge Control Valve, Open Command
C 7 11 RIO-4:7:I.Pt11.Data DI FE-C4_ZSL Filter 4 Effluent Control Valve 1, Closed Status
2 06 RIO-4:2:O.Pt06.Data DO FD-C8_ZCH Filter 4 Discharge Control Valve, Open Command
7 12 RIO-4:7:I.Pt12.Data DI FI-C3_ZSH Filter 3 Influent Control Valve, Opened Status
2 07 RIO-4:2:O.Pt07.Data DO FJW-C11_ZCH Filter 3 Jet Water Control Valve, Open Command
7 13 RIO-4:7:I.Pt13.Data DI FI-C3_ZSL Filter 3 Influent Control Valve, Closed Status
2 08 RIO-4:2:O.Pt08.Data DO FJW-C12_ZCH Filter 4 Jet Water Control Valve, Open Command
7 14 RIO-4:7:I.Pt14.Data DI FI-C4_ZSH Filter 4 Influent Control Valve, Opened Status
2 09 RIO-4:2:O.Pt09.Data DO FMW-C3_ZCH Filter 3 Wash Water Control Valve, Open Command
7 15 RIO-4:7:I.Pt15.Data DI FI-C4_ZSL Filter 4 Influent Control Valve, Closed Status
2 10 RIO-4:2:O.Pt10.Data DO FMW-C4_ZCH Filter 4 Wash Water Control Valve, Open Command
2 11 RIO-4:2:O.Pt11.Data DO FIB-C8_ZCH Filter Bypass Control Valve, Open Command
2 12 RIO-4:2:O.Pt12.Data DO CLI-C1_ZCH Clarifier 1 Intake Control Valve, Open Command
8 02 RIO-4:8:I.Pt02.Data DI FE-C8_ZSH Filter 4 Effluent Control Valve 2, Opened Status By Appd YYYY.MM.DD
2 13 RIO-4:2:O.Pt13.Data DO CLI-C1_ZCL Clarifier 1 Intake Control Valve, Close Command Revision
2 14 RIO-4:2:O.Pt14.Data DO CLI-C2_ZCH Clarifier 2 Intake Control Valve, Open Command
8 04 RIO-4:8:I.Pt04.Data DI FD-C7_ZSH Filter 3 Discharge Control Valve, Opened Status
2 15 RIO-4:2:O.Pt15.Data DO CLI-C2_ZCL Clarifier 2 Intake Control Valve, Close Command
8 05 RIO-4:8:I.Pt05.Data DI FD-C7_ZSL Filter 3 Discharge Control Valve, Closed Status C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
3 00 RIO-4:3:O.Pt00.Data DO CLD-C2_ZCH Clarifier Blowoff Control Valve, Open Command
8 06 RIO-4:8:I.Pt06.Data DI FD-C8_ZSH Filter 4 Discharge Control Valve, Opened Status A For Review ML/DM SSS 2021.09.20
3 01 RIO-4:3:O.Pt01.Data DO CBW-C1_ZCH Clarifier Backwash Control Valve, Open Command
8 07 RIO-4:8:I.Pt07.Data DI FD-C8_ZSL Filter 4 Discharge Control Valve, Closed Status
8 08 RIO-4:8:I.Pt08.Data DI FJW-C11_ZSH Filter 3 Jet Water Control Valve, Opened Status Filter (not in use atm) File Name: 165620209-EI614 ML/DM SSS SSS 2020.12.18
8 09 RIO-4:8:I.Pt09.Data DI FJW-C11_ZSL Filter 3 Jet Water Control Valve, Closed Status
8 10 RIO-4:8:I.Pt10.Data DI FJW-C12_ZSH Filter 4 Jet Water Control Valve, Opened Status Filter (not in use atm)
3 05 RIO-4:3:O.Pt05.Data DO - Spare Permit/Seal
8 11 RIO-4:8:I.Pt11.Data DI FJW-C12_ZSL Filter 4 Jet Water Control Valve, Closed Status
8 12 RIO-4:8:I.Pt12.Data DI FMW-C3_ZSH Filter 3 Wash Water Control Valve, Opened Status
B 8 13 RIO-4:8:I.Pt13.Data DI FMW-C3_ZSL Filter 3 Wash Water Control Valve, Closed Status
8 14 RIO-4:8:I.Pt14.Data DI FMW-C4_ZSH Filter 4 Wash Water Control Valve, Opened Status
8 15 RIO-4:8:I.Pt15.Data DI FMW-C4_ZSL Filter 4 Wash Water Control Valve, Closed Status
9 00 RIO-4:9:I.Pt00.Data DI FIB-C8_ZSH Filter Bypass Control Valve, Opened Status
9 01 RIO-4:9:I.Pt01.Data DI FIB-C8_ZSL Filter Bypass Control Valve, Closed Status
3 13 RIO-4:3:O.Pt13.Data DO - Spare Client/Project Logo
4 00 RIO-4:4:I.Pt00.Data AI LIT45_LE4_LI Filter 3 Level
4 01 RIO-4:4:I.Pt01.Data AI LIT45_LE5_LI Filter 4 Level
4 02 RIO-4:4:I.Pt02.Data AI FIT4_FI Filter 3 Effluent Flow
4 03 RIO-4:4:I.Pt03.Data AI FIT5_FI Filter 4 Effluent Flow
9 09 RIO-4:9:I.Pt09.Data DI - Spare Client/Project
4 04 RIO-4:4:I.Pt04.Data AI PDIT3_PI Filter 3 Differential Pressure Indication
9 10 RIO-4:9:I.Pt10.Data DI - Spare The Coorporation of the
4 05 RIO-4:4:I.Pt05.Data AI PDIT4_PI Filter 4 Differential Pressure Indication
Town of Amherstburg
4 06 RIO-4:4:I.Pt06.Data AI AIT4_AI Filter 3 Turbidity Analyzer
AIT5_AI Filter 4 Turbidity Analyzer

9 12 RIO-4:9:I.Pt12.Data DI - Spare Amherstburg WTP Electrical &
4 07 RIO-4:4:I.Pt07.Data AI
SCADA Upgrades
5 00 RIO-4:5:I.Pt00.Data AI FE-C7_ZI Filter 3 Effluent Control Valve 2, Position Indication Filter (not in use atm)
9 14 RIO-4:9:I.Pt14.Data DI - Spare 415 Front Rd N., Amherstburg, ON, N9V 2V5
5 01 RIO-4:5:I.Pt01.Data AI FE-C8_ZI Filter 4 Effluent Control Valve 2, Position Indication Filter (not in use atm)
A
5 02 RIO-4:5:I.Pt02.Data AI PIT6_PI Wash Water Pressure Indication
Title
5 03 RIO-4:5:I.Pt03.Data AI PIT7_PI Jet Wash Water Pressure Indication
RIO-4 IO Schedule
5 04 RIO-4:5:I.Pt04.Data AI LIT14_LI Filter Clearwell Level Transmitter
Project No. Scale
165620209
2022.05.03 11:19:52 AM

of
EI-614
1 2 3 4 5
to LP-x
001 120VAC,1∅/3W 071
15A FEED
002 072
003 073
120VAC LU201
036 L +
0Vac
G
120Vac
120Vac
0VAC NU
24Vdc
004 074
036 N
G GND
005 CB100 075 Stantec Consulting Ltd.
040 G 240W/10A -
NOTE: Redundancy module is 171 Queens Avenue, 6th Floor
006
L
120Aac N
076 PS1 not required if power supplies London ON N6A 5J7
15A POWER SUPPLY 1 are capable of being paralleled Tel: 519.645.2007
007 077
+
G G in redundant mode. www.stantec.com
L 120VAC LU202 2x10A
008 3kA/26A 078
L N 042 L + + - Copyright Reserved
120Vac
0VAC NU NU
24Vdc
24Vdc
24Vdc
D 009 SPD1 079 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
039 N - any errors or omissions shall be reported to Stantec without delay.
GND G GND GND P1
010 080 The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
043 G 240W/10A - - + use for any purpose other than that authorized by Stantec is forbidden.
011 CB101 LT1 081 PS2 DIO1
POWER ON POWER SUPPLY 2 REDUNDANCY Legend
NU
012
X1
W
X2
082 DCB300 MODULE
10A Proposed Equipment
013
G 083 Proposed Field Wiring
10A
014 084
ZS LT
NU
015 085 DCB301
PANEL RIO-1/MOD
G N1
016 DOOR SWITCH LIGHT 086 + 24Vdc -
5A
017
REC1 087
CONTROLLER/ADAPTER MOD POWER
NU
018 088 DCB302
RIO-1/SA
Notes
G N1 1. All new field control wiring to be multi-conductor, #14AWG
019 089 + 24Vdc -
5A copper, armored TECK90 cables to CSA C22.2 No. 131,
020
REC2 090 number of conductors as indicated on drawing.
CONTROLLER/ADAPTER SA POWER
NU 2. UPS to be wall mounted directly next to SCP.
021 091 DCB3__
to OIT 3. Provide breaker quantities and wiring as required in each
022
G 092
P3__ 24VDC 0VDC N1 N1 panel.
1A (SCP-3/4 only)
023
NU 093
G P301 GND
024 094 DCB3__
EI621:12 to ANALOG INPUT MODULE
025 095
P3__ 24VDC 24VDC LOOP POWER 0VDC N1 N1
L
1A (one per module)
026 096
120Vac
120Vac
C 027
N
097 DCB3__
to FIELD INSTRUMENTS
028
1,500VA G
098
P3__ 24VDC (See Loop Diagrams and 0VDC N1 N1
UPS1 1A Schedule)
029 UNINTERRUPTABLE 099
POWER SUPPLY
NU
030 100 DCB3__
031
G 101 SPARE (MINIMUM 4) N1
1A
032 LT2 102
UPS ON
033
LU W
NU 103
X1 X2
034
G 104 Revision By Appd YYYY.MM.DD
035 CB201 105

LU201 120VAC PS1 0VAC NU NU
036 106
073 24VDC POWER SUPPLY 074
4A
037
G GND G 107
075 B For Review ML/DM SSS 2021.12.03
038 CB202 108
LU202 120VAC PS2 0VAC NU NU
039 109
078 24VDC POWER SUPPLY 079
4A
040
G GND G 110 File Name: 165620209-EI621 ML/DM SSS SSS 2020.12.18
080 Dwn. Dsgn. Chkd. YYYY.MM.DD
041 CB203 111
RIO-1/SA1
NU Permit/Seal
042 L 120Vac N 112
5A
043 G
G 113
044 114
B FDP1 SA POWER
045 CB2__ 115
PLC1-1/PS
NU
046 L 120Vac N 116
5A (SCP-1 only)
047 G
G 117
048 118
PLC POWER
049 CB2__ 119
to RELAY OUTPUT MODULE
050
LU2__ 120VAC EXTERNAL POWER NU NU 120 Client/Project Logo
2A (One per module)
051
GND G 121
052 CB2__ 122

to FIELD INSTRUMENTS
053
LU2__ (See Loop Diagrams and NU NU 123
1A Schedule)
054
GND G 124
055 CB2__ 125
056 SPARE (MINIMUM 4) NU 126

1A
G Client/Project
057 127
058 128
Town of Amherstburg
059 129
060 130
SCADA Upgrades
061 131
062 132
A
063 133
Title
064 134
SCADA Control Panel
065 135
Typical AC/DC Distribution
066 136
067 137
Project No. Scale
068 138
165620209
2022.05.03 11:20:02 AM
069 139
of
EI-621
070 140

1 2 3 4 5
SA Power
Rockwell, Compactlogix Rockwell, Compactlogix Stantec Consulting Ltd.
120VAC
SA POWER
5069-IA16 5069-IB16 Rockwell, Compactlogix 171 Queens Avenue, 6th Floor
120/240Vac London ON N6A 5J7
24VDC
24Vdc 5069-OF8
Tel: 519.645.2007
16-Pt Digital Input 16-Pt Digital Input 8-Pt Analog Output
www.stantec.com
Module a Module b Module e
EPAV Copyright Reserved
D O.e/0 Me
Mb I.b/0 The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
b00 TAG e00 W W
TAG AO 00+ + AOxx - any errors or omissions shall be reported to Stantec without delay.
Ma I.a/0 00 DI DESCRIPTION - + The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
a00 DESCRIPTION POSITION
TAG BK BK use for any purpose other than that authorized by Stantec is forbidden.
00 DI 00- - SETPOINT
DESCRIPTION
P SH
SH Legend
L I.b/1
b01 TAG Proposed Equipment/Wiring
I.a/1 01 DI
a01 DESCRIPTION Proposed Wiring (Field)
TAG
01 DI
DESCRIPTION O.e/1
Fused terminal block
P TAG e01 W
AO 01+ Disconnect terminal block
DESCRIPTION - +
L I.b/2
b02 BK Feed-through terminal block
TAG 01-
I.a/2 02 DI
Grounding terminal block
a02 DESCRIPTION SH
TAG
02 DI SH
DESCRIPTION
P
L I.b/3 Notes
b03 TAG
I.a/3 03 DI O.e/2 1. For further wiring details, see control schematic and loop
a03 DESCRIPTION
TAG TAG e02 W diagrams,
03 DI AO 02+
DESCRIPTION DESCRIPTION - +
P BK
02-
L
SH
04
TYPICAL 120Vac DISCRETE INPUT CARD WIRING TYPICAL 24Vdc DISCRETE INPUT CARD WIRING
O.e/3
1. Panel wiring to be #16AWG, Cu, SIS or TEW, red, white for neutral where required. 1. Panel wiring to be #16AWG, Cu, SIS or TEW, blue wiring. TAG e03 W
Alternatively, field power provided by SA power and neutral not required.
AO 03+
DESCRIPTION - +
2. Terminals to be two-level terminal block, quantity as required, with bottom BK
2. Terminals to be two-level terminal block, quantity as required, with bottom feed-through terminal for common 24Vdc power supply, and top level 03-
feed-through terminal for common 120Vac power supply, and top level disconnect disconnect terminal for signal input. SH
C terminal for signal input.
TYPICAL ISOLATED ANALOG OUTPUT CARD WIRING

Rockwell, Compactlogix
24VDC
0VDC
5069-IF8 1. Panel wiring to be 1/P or multi-pair, #18AWG, Cu, CIC, shielded twisted-pair(s)
8-Pt Analog Input stranded wire.
Module d
2. Signal terminals to be two-level terminal block, quantity as required, with bottom
Md feed-through terminal for negative signal output, and top level disconnect
to SCP terminal for positive signal output.
F00
N
I.d/0
G
L By Appd YYYY.MM.DD
120Vac 1P#16 W d00 W TAG 3. Shield terminal blocks to be two-level grounding type, one per two inputs. Revision
to SENSOR 00+ AI
+ + - DESCRIPTION
0-xxm
BK BK
-
00-
4-20mA
N
Rockwell, Compactlogix SH
LIT/FIT/AIT-xx SH B For Review ML/DM SSS 2021.12.03
5069-OW16 4 WIRE A For Review ML/DM SSS 2021.09.20
120VAC
120/240Vac TRANMISTTER By YYYY.MM.DD

Issued Appd
0VAC
16-Pt Relay Output

Module c File Name: 165620209-EI622 ML/DM SSS SSS 2020.12.18
0-xxm 1P#16 W
F01
COM + I.d/1
BK d01 W TAG Permit/Seal
01+ AI
- + - DESCRIPTION
BK
4-20mA G
01-
O.c/0 Mc SOV
B c00 PIT/PDIT N
TAG SOLENOID
00 LOOP POWERED
DESCRIPTION VALVE TRANMISTTER SH
N
O.c/1
TAG c01
01
DESCRIPTION
N
EPAV F02
I.d/2
O.c/3 1P#16 W d02 W TAG Client/Project Logo
c02 + 02+ AI
TAG AIxx + - DESCRIPTION
02
DESCRIPTION POSITION BK BK
- 02-
INDICATION
N
N
O.c/4
c03 E/P VALVE POSITIONER PO MODULE SH
TAG
03
DESCRIPTION
N
Client/Project
F03 The Coorporation of the
I.d/3
d03 W TAG
TYPICAL DISCRETE OUTPUT RELAY CARD WIRING 03+ +
AI
- DESCRIPTION Town of Amherstburg
BK
1. Panel wiring to be #16AWG, Cu, SIS or TEW, red. 03-
N
2. Terminals to be two-level terminal block, quantity as required, with bottom SCADA Upgrades
feed-through terminal for return, and top level disconnect terminal.

SH
A
TYPICAL ANALOG INPUT CARD WIRING
Title
1. Panel wiring to be 1/P or multi-pair, #18AWG, Cu, CIC, shielded twisted-pair(s)
stranded wire. SCADA Control Panel
2. Signal terminals to be two-level terminal block, quantity as required, with bottom Typical PLC Card Wiring
feed-through terminal for negative signal input, and top level disconnect
terminal for positive signal input; one per analog input
3. Fused terminal blocks to be double-level, quantity as required, with top level Project No. Scale
fused terminal, and bottom level feed-through terminal; one per analog input. 165620209
2022.05.03 11:20:11 AM
4. Shield terminal blocks to be two-level grounding type, one per two inputs. Revision Sheet Drawing No.

of
EI-622
1 2 3 4 5
SCP-x SCP-x
001 JBX 071
JBX
002 072
NO
6C#14 DI
FILTER 1 EFFLUENT
ZSH CONTROL VALVE 1 8C#14 HIGH LIFT
003 073 NO DI
FE-C1 OPENED STATUS ZSH CONTROL VALVE
C L
HLS-C4 OPENED STATUS
004 074 C L
G
005 075 G Stantec Consulting Ltd.
006 OPENED LIMIT 076 London ON N6A 5J7
OPENED LIMIT Tel: 519.645.2007
007 077
FILTER 1 EFFLUENT www.stantec.com
NO DI
ZSL CONTROL VALVE 1 HIGH LIFT
008 078 NO DI
FE-C1 CLOSED STATUS ZSL CONTROL VALVE Copyright Reserved
C L
D HLS-C4 CLOSED STATUS
009 079 C L The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
G - any errors or omissions shall be reported to Stantec without delay.
010 080 G The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
011 CLOSED LIMIT 081
CLOSED LIMIT Legend
012 082 Proposed Equipment/Wiring
L DO
FILTER 1 EFFLUENT
ZCH CONTROL VALVE 1 HIGH LIFT Existing Equipment/Wiring
013 083 L DO
FE-C1 OPEN COMMAND ZCH CONTROL VALVE
N N 0.1A
HLS-C4 OPEN COMMAND
014 084 N N 24Vdc Fused terminal block, 24Vdc, 0.1A
G G Disconnect terminal block
015 085 G
120Vac, 7VA Feed-through terminal block
016 OPEN SV 086 120Vac, 7VA SH Grounding terminal block
1A
OPEN SV 120Vac Circuit breaker, 120Vac, 1A
017 087
HIGH LIFT
018 Typical Loop Diagram - Existing Pneumatic-Electric Actuated Valve 088
ZCL L DO
CONTROL VALVE
Notes
HLS-C4 CLOSE COMMAND 1. All new field control wiring to be multi-conductor, #14AWG
019 SCP Tag Decription 089 N N
copper, armored TECK90 cables to CSA C22.2 No. 131,
020 SCP-3 FE-C1 FILTER 1 EFFLUENT CONTROL VALVE 1 090 G G number of conductors as indicated on drawing.
SCP-3 FE-C2 FILTER 2 EFFLUENT CONTROL VALVE 1 2. All new field instrumentation wiring to be #16AWG copper
021 091 120Vac, 7VA twisted, shielded pair conductors, armored ACIC cables to
SCP-4 FE-C3 FILTER 3 EFFLUENT CONTROL VALVE 1 CLOSE SV
022 092 CSA C22.2 No. 239, number of pairs as indicated on
SCP-4 FE-C4 FILTER 4 EFFLUENT CONTROL VALVE 1 drawings.
023 093 3. Splice new and existing cables in the existing junction boxes
SCP-3 FMW-C1 FILTER 1 WASH WATER CONTROL VALVE
or conduit fittings as indicated. Supply and install new
024 094
SCP-3 FMW-C2 FILTER 2 WASH WATER CONTROL VALVE Typical Loop Diagram - Existing Pneumatic-Electric Actuated Valve 150mmx150mm PVC non-metallic junction boxes as required.
025 SCP-4 FMW-C3 FILTER 3 WASH WATER CONTROL VALVE 095
SCP Tag Decription
026 SCP-4 FMW-C4 FILTER 4 WASH WATER CONTROL VALVE 096
SCP-2 HLS-C4 HIGH LIFT CONTROL VALVE
C 027 SCP-3 FJW-C9 FILTER 1 JET WATER CONTROL VALVE 097
SCP-4 CLI-C1 CLARIFIER 1 INTAKE CONTROL VALVE
SCP-3 FJW-C10 FILTER 2 JET WATER CONTROL VALVE
028 098 SCP-4 CLI-C2 CLARIFIER 2 INTAKE CONTROL VALVE
SCP-4 FJW-C11 FILTER 3 JET WATER CONTROL VALVE
029 099
SCP-4 FJW-C12 FILTER 4 JET WATER CONTROL VALVE Conduit Fitting A
030 100
SCP-3 FD-C5 FILTER 1 DISCHARGE CONTROL VALVE
031 101 NO
6C#14 DI
FILTER 1 INFLUENT
SCP-3 FD-C6 FILTER 2 DISCHARGE CONTROL VALVE ZSH CONTROL GATE
FI-C1 OPENED STATUS
032 SCP-4 FD-C7 FILTER 3 DISCHARGE CONTROL VALVE 102 C L
033 SCP-4 FD-C8 FILTER 4 DISCHARGE CONTROL VALVE 103 G
034 SCP-4 FIB-C8 FILTER BYPASS CONTROL VALVE 104 Revision By Appd YYYY.MM.DD
SCP-3 CLB-C5 CLARIFIER BYPASS CONTROL VALVE OPENED LIMIT

035 105
SCP-4 FCI-C9 FILTER/CLARIFIER INLET CONTROL VALVE FILTER 1 INFLUENT
036 106 NO DI
SCP-4 CBW-C1 CLARIFIER BACKWASH CONTROL VALVE ZSL CONTROL GATE
FI-C1 CLOSED STATUS C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
037 107 C L
038 108 G A For Review ML/DM SSS 2021.09.20

039 109
4C#14 FILTER 1 INFLUENT
ZSH NO DI CLOSED LIMIT
040
CONTROL GATE 110 File Name: 165620209-EI631 ML/DM SSS SSS 2020.12.18
FE-C5 OPENED STATUS Dwn. Dsgn. Chkd. YYYY.MM.DD
C L
041 111 L DO
FILTER 1 INFLUENT
ZCH CONTROL GATE
SIG
FI-C1 OPEN COMMAND Permit/Seal
042 112 N N
043 OPENED LIMIT 113 G G
044 114 120Vac, 7VA

B FILTER 1 INFLUENT
ZSL NO DI OPEN SV
045
CONTROL GATE 115
FE-C5 CLOSED STATUS
C L
046 116
SIG G Typical Loop Diagram - Existing Pneumatic-Electric Actuated Valve
047 117
SCP Tag Decription
048 CLOSED LIMIT 0.1A 118
24Vdc SCP-3 FI-C1 FILTER 1 INFLUENT CONTROL GATE
049 119
2P#16 W W FILTER 1 EFFLUENT SCP-3 FI-C2 FILTER 2 INFLUENT CONTROL GATE
+ AI
ZI + - CONTROL VALVE 2 Client/Project Logo
050 120 SCP-4 FI-C3 FILTER 3 INFLUENT CONTROL GATE
FE-C5 -
BK BK POSITION CONTROL
051 121 SCP-4 FI-C4 FILTER 4 INFLUENT CONTROL GATE
G N
052 122
4-20mA G JBX
053 POSITION 123
INDICATION
054 124 L
2C#14 DO
CLARIFIER BLOWOFF
W W FILTER 1 EFFLUENT ZCH CONTROL VALVE
+ AO
ZC + - CONTROL VALVE 2 CLD-C2 OPEN COMMAND
055 125 N N
FE-C5 -
BK BK POSITION CONTROL
056 126 G G
G G Client/Project
057 127 120Vac, 7VA
4-20mA OPEN SV The Coorporation of the
058 POSITION 128
CONTROL Town of Amherstburg
059 129
Typical Loop Diagram - Existing Pneumatic-Electric Actuated Valve

Typical Loop Diagram - Existing Pneumatic-Electric Actuated Valve Amherstburg WTP Electrical &
060 130
SCADA Upgrades
SCP Tag Decription

061 SCP Tag Decription 131
SCP-4 CLD-C2 CLARIFIER BLOWOFF CONTROL VALVE 415 Front Rd N., Amherstburg, ON, N9V 2V5
062 SCP-3 FE-C5 FILTER 1 EFFLUENT CONTROL VALVE 2 132
A
SCP-3 FE-C6 FILTER 2 EFFLUENT CONTROL VALVE 2
063 133
Title
064
134
Loop Diagrams
065
SCP-2 RW-C1 RAW WATER CONTROL VALVE
135
SCADA Control Panels
066 SCP-3 FJW-C13 JET WATER CONTROL VALVE 136
067 SCP-3 FMW-C14 WASH WATER CONTROL VALVE 137

Project No. Scale
068 138
165620209
2022.05.03 11:20:21 AM
069 139
of
EI-631
070 140

1 2 3 4 5
SCP-x SCP-x
001 071
002 072
1A 1A
2C#14 BK 2C#14 BK
003 L 120Vac 073 L 120Vac
POWER W POWER W
004 N N 074 N N
SUPPLY SUPPLY
005 G G 075 G G Stantec Consulting Ltd.
006 076 London ON N6A 5J7
0.1A 0.1A Tel: 519.645.2007
007 24Vdc 077 24Vdc www.stantec.com
1P#16 W W FLOW 1P#16 W 1P#16 W W LEVEL
008
FE FIT + + AI 078
LE + +
LIT + + AI
+ - INDICAITON + - INDICAITON Copyright Reserved
D 1 1 BK BK 10 BK 10 BK BK
009 - - 079 - - - - The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
010 N 080 N The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
FLOW SENSOR FLOW TRANSMITTER LEVEL SENSOR LEVEL TRANSMITTER use for any purpose other than that authorized by Stantec is forbidden.
011 G 081 G
Legend
012 082 Proposed Equipment/Wiring
Typical Loop Diagram - Existing Magnetic Flow Transmitter
013 083 Existing Equipment/Wiring
SCP Tag Decription Typical Loop Diagram - Proposed Ultrasonic Level Transmitter 0.1A
014 084 24Vdc Fused terminal block, 24Vdc, 0.1A
SCP-2 FIT-1 RAW WATER FLOW SCP Tag Decription
Disconnect terminal block
015 085
SCP-3 FIT-2 FILTER 1 EFFLUENT FLOW SCP-2 LIT-10 INLET WELL RAW WATER LEVEL Feed-through terminal block
016 SCP-3 FIT-3 FILTER 2 EFFLUENT FLOW 086
SCP-2 LIT-12 LOW LIFT PUMP WELL RAW WATER LEVEL SH Grounding terminal block
1A
120Vac Circuit breaker, 120Vac, 1A
017 SCP-4 FIT-4 FILTER 3 EFFLUENT FLOW 087 SCP-3 LIT-13 FILTER INLET CHANNEL LEVEL
018 SCP-4 FIT-5 FILTER 4 EFFLUENT FLOW 088 Notes
019
SCP-3 FIT-6 WASH WATER FLOW 089
1. All new field control wiring to be multi-conductor, #14AWG
copper, armored TECK90 cables to CSA C22.2 No. 131,
SCP-2 FIT-9 PLANT EFFLUENT FLOW
020 090 number of conductors as indicated on drawing.
2. All new field instrumentation wiring to be #16AWG copper
021 091
twisted, shielded pair conductors, armored ACIC cables to
1A
2C#14 BK CSA C22.2 No. 239, number of pairs as indicated on
022 092 L 120Vac
0.1A drawings.
1P#16 W POWER W
023
FIT + 24Vdc 093 N N
SUPPLY
7 BK W FLOW
024 - AI 094 G G
+ - INDICAITON
025 - BK 095
FLOW TRANSMITTER 0.1A
026 N 096 24Vdc
C G 1P#16 W 1P#16 W W DIFF. LEVEL
027 097
LE + +
LDIT + + AI
Typical Loop Diagram - Existing Differential Pressure Flow Transmitter + - INDICAITON
11A BK 11 BK BK
028 098 - - - -
SCP Tag Decription
1P#16 W
029 099 + N
SCP-3 FIT-7 JET WASH WATER FLOW LEVEL SENSOR
BK
030 100 UPSTREAM - G
SCP-2 FT-10 ALUM INJECTION FLOW
031 101
LEVEL TRANSMITTER
032 102 +
LE
033 103 11B -
1A
2C#14 BK Revision By Appd YYYY.MM.DD
034 L 120Vac 104
POWER LEVEL SENSOR
035 N N 105 DOWNSTREAM
SUPPLY
036 G G 106
037 107
Typical Loop Diagram - Proposed Dual Ultrasonic Differential Level Transmitter B For Review ML/DM SSS 2021.12.03
038 24Vdc 108
SCP Tag Decription Issued By Appd YYYY.MM.DD
1P#16 W W LEVEL X
039
LE + +
LIT + + AI 109
+ - INDICAITON SCP-2 LDIT-11 TRAVELING SCREEN WELL RAW WATER LEVEL
2 2/3 BK BK File Name: 165620209-EI632 ML/DM SSS SSS 2020.12.18
040 - - - - 110
041 + + N 111
LEVEL SENSOR
042 - - G 112 Permit/Seal
043
LE + 24Vdc 113 JBX
LEVEL TRANSMITTER 0.1A
3 1P#16 W W LEVEL Y 1P#16 W
044 - + AI 114
PIT + 24Vdc
B + - INDICAITON
BK BK 8 BK W PRESSURE
045 - 115 - + AI
+ - INDICATION
LEVEL SENSOR
BK
046 N 116 -
PRESSURE TRANSMITTER
047 G 117 N
Typical Loop Diagram - Existing Dual Ultrasonic Level Transmitter
048 118 Typical Loop Diagram - Existing Pressure and Differential Pressure Transmitters G
SCP Tag Decription
049 119 SCP Tag Decription
SCP-3 LIT-2/3 FILTER 1/2 LEVEL
050
SCP-4 LIT-4/5 FILTER 3/4 LEVEL 120 SCP-3 PDIT-1 FILTER 1 DIFFERENTIAL PRESSURE Client/Project Logo
051 121 SCP-3 PDIT-2 FILTER 2 DIFFERENTIAL PRESSURE
SCP-4 PDIT-3 FILTER 3 DIFFERENTIAL PRESSURE
052 122
SCP-4 PDIT-4 FILTER 4 DIFFERENTIAL PRESSURE
053 123
1A SCP-4 PIT-6 WASH WATER PRESSURE
2C#14 BK
054 L 120Vac 124
SCP-4 PIT-7 JET WASH WATER PRESSURE
POWER
055 N N 125 SCP-2 PIT-8 PLANT EFFLUENT PRESSURE
SUPPLY
056 G G 126
Client/Project
057 127
0.1A The Coorporation of the
058 24Vdc 128
Town of Amherstburg
W 1P#16 W W LEVEL
059
LE + +
LIT + + AI 129
+ - INDICAITON
6 BK 6 BK Amherstburg WTP Electrical &
060 - - - - 130
SCADA Upgrades
061 N 131
LEVEL SENSOR LEVEL TRANSMITTER 415 Front Rd N., Amherstburg, ON, N9V 2V5
062 G 132
A
063 133
Typical Loop Diagram - Existing Ultrasonic Level Transmitter Title
064
SCP Tag Decription
134
Loop Diagrams
065
PLC-1 LIT-6 ALUM STORAGE TANK 1 LEVEL
135
066 LIT-7 136
PLC-1 ALUM STORAGE TANK 2 LEVEL
067 SCP-4 LIT-14 FILTER CLEARWELL LEVEL 137
Project No. Scale
068 138
165620209
2022.05.03 11:20:32 AM
069 139
of
EI-632
070 140

1 2 3 4 5
SCP-x SCP-x
001 071
002 072
003 073
2A 2A
2C#14 BK 2C#14 BK
004 L 120Vac 074 L 120Vac
POWER W POWER W
005 N N 075 N N Stantec Consulting Ltd.
SUPPLY SUPPLY
006 G G 076 G G London ON N6A 5J7
Tel: 519.645.2007
007 077
www.stantec.com
0.1A 0.1A
008 24Vdc 078 24Vdc
Copyright Reserved
D 1P#16 W W CHLORINE 1P#16 W W TURBIDITY
009
AE + +
AIT + + AI 079
AE AIT + + AI The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
+ - INDICAITON + - INDICAITON - any errors or omissions shall be reported to Stantec without delay.
x x BK BK 1 1 BK BK The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
010 - - - - 080 - -
011 N 081 N
CHLORINE SENSOR CHLORINE TRANSMITTER TURBIDITY SENSOR TURBIDITY TRANSMITTER Legend
012 G 082 G Proposed Equipment/Wiring
013 083 Existing Equipment/Wiring
Typical Loop Diagram - Existing Turbidity Transmitter 0.1A
014 Instrument Control Schematics 084 24Vdc Fused terminal block, 24Vdc, 0.1A
SCP Tag Decription Disconnect terminal block
SCP-2 AIT-1 RAW WATER TURBIDITY Feed-through terminal block
016 PLC-1 AIT-8 RAW WATER CHLORINE 086 SH Grounding terminal block
1A
120Vac Circuit breaker, 120Vac, 1A
017 087
018 088 Notes

019 089
1. All new field control wiring to be multi-conductor, #14AWG
2A 2A copper, armored TECK90 cables to CSA C22.2 No. 131,
2C#14 BK 2C#14 BK number of conductors as indicated on drawing.
020 L 120Vac 090 L 120Vac
POWER W POWER W 2. All new field instrumentation wiring to be #16AWG copper
021 N N 091 N N twisted, shielded pair conductors, armored ACIC cables to
SUPPLY SUPPLY
022 G G 092 G G CSA C22.2 No. 239, number of pairs as indicated on
drawings.
023 093
0.1A 0.1A
024 24Vdc 094 24Vdc
1P#16 W W CHLORINE 2P#16 W W TURBIDITY
025
AE + +
AIT + + AI 095
AE AY + +
AIT + + AI
+ - INDICAITON + - INDICATION
x x BK BK 2 2 2/3 BK BK
026 - - - - 096 - - - -
C 027 N 097 + + N
CHLORINE SENSOR CHLORINE TRANSMITTER TURBIDITY SENSOR TURBIDITY POWER SUPPLY
028 G 098 & NETWORK CONNECTION - - G
029 099
TURBIDITY TRANSMITTER 0.1A
030 Instrument Control Schematics 100 24Vdc
W W TURBIDITY
AE AY + + AI
+ - INDICATION
PLC-1 AIT-12 PLANT EFFLUENT CHLORINE 3 3 BK BK
032 102 - -
033 103 N
TURBIDITY SENSOR TURBIDITY POWER SUPPLY
034 104 & NETWORK CONNECTION G
035 105
2A
2C#14 BK
036 106 L 120Vac
2A
2C#14 BK POWER W C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
037 L 120Vac 107 N N
SUPPLY B For Review ML/DM SSS 2021.12.03
POWER W A For Review ML/DM SSS 2021.09.20
038 N N 108 G G
SUPPLY By YYYY.MM.DD
Issued Appd
039 G G 109
040 110
0.1A Typical Loop Diagram - Existing Turbidity Transmitter Dwn. Dsgn. Chkd. YYYY.MM.DD
041 24Vdc 111
SCP Tag Decription
2P#16 W W CHLORINE Permit/Seal
042
AE + +
AIT + + AI 112
+ - INDICAITON SCP-3 AIT-2 FILTER 1 TURBIDITY
x x BK BK
043 - - - - 113
SCP-3 AIT-3 FILTER 2 TURBIDITY
044 N 114 SCP-4 AIT-4 FILTER 3 TURBIDITY
B CHLORINE SENSOR CHLORINE TRANSMITTER
045 G 115 SCP-4 AIT-5 FILTER 4 TURBIDITY
046 116 PLC-1 AIT-6 CLARIFIER EFFLUENT TURBIDITY
Instrument Control Schematics PLC-1 AIT-7 PLANT EFFLUENT TURBIDITY
047 117
SCP Tag Decription
048 118
PLC-1 AIT-10 FILTER EFFLUENT CHLORINE
049 119
PLC-1 AIT-11 RESERVOIR CHLORINE
050 120 Client/Project Logo
051 121
052 122
053 123
054 124
055 125
056 126
Client/Project
057 127
058 128
Town of Amherstburg
059 129
060 130
SCADA Upgrades
061 131
062 132
A
063 133
Title
064 134
Loop Diagrams
065 135
066 136
067 137
Project No. Scale
068 138
165620209
2022.05.03 11:20:42 AM
069 139
of
EI-633
070 140

1 2 3 4 5
PIPING ARRANGEMENT GUIDELINES BALLOON SYMBOLS FIELD MOUNTED INSTRUMENTS MAY BE POST OR WALL MOUNTED TAG NUMBERS MEANINGS OF IDENTIFICATION LETTERS
1. FIELD CHECK ALL EXISTING STRUCTURES, 20. ARRANGE PIPE RACKS WITH DUE AE ANALYZER PRIMARY ELEMENT FIRST LETTER SUCCEEDING LETTERS
EQUIPMENT, PIPING AND APPURTENANCES FOR CONSIDERATION TO SUPPORT OF ELECTRICAL STATUS LIGHT SHOW COLOUR VCP LOCAL CONTROL PANEL
AI ANALYZER INDICATOR INDLUDED IN VENDOR PACKAGE
COMPLETENESS OF DETAIL, LOCATION TRAYS. GENERALLY, ELECTRICAL TRAYS ARE INSIDE SYMBOL MEASURED OR
AT ANALYZER TRANSMITTER READOUT OR PASSIVE
DIMENSIONS, ETC. PRIOR TO CONSTRUCTION. LOCATED ABOVE PIPING. GROUP HOT LINES LETTER INTIATING MODIFER OUTPUT FUNCTION MODIFIER
AIT ANALYZER INDICATOR TRANSMITTER ACP AREA CONTROL PANEL
VARIABLE
FUNCTION
REQUIRING EXPANSION LOOPS ON ONE SIDE OF CV GENERAL CONTROL VALVE
2. FIELD CHECK NEW PIPING ROUTING, VALVE A RACK FOR EASE OF SUPPORT. FAH FLOW ALARM HIGH SYSTEM LOGIC A ANALYSIS (2) ALARM Stantec Consulting Ltd.
I
LOCATIONS ETC. FOR INTERFERENCE AND FAL FLOW ALARM LOW 171 Queens Avenue, 6th Floor
COORDINATE WITH OTHER TRADES WHERE 21. GROUP HOT LINES REQUIRING EXPANSION DIGITAL INPUT CLOSE, DECREASE (1) London ON N6A 5J7
FC FLOW CONTROLLER\ B BURNER, COMBUSTION
REQUIRED. REVIEW ANY LOCAL ADJUSTMENTS LOOPS ON ONE SIDE OF A RACK FOR EASE OF MANUAL RESET Tel: 519.645.2007
FE FLOW ELEMENT R
WITH ENGINEER PRIOR TO STARTING WORK. SUPPORT. FI FLOW INDICATOR C CONTROL www.stantec.com
USE STANDARD FITTINGS WHENEVER POSSIBLE. FIC FLOW INDICATOR CONTROLLER
22. LOCATE UTILITY STATIONS, CONTROL VALVE EMERGENCY SHUTDOWN LOGIC D DIFFERENTIAL START, INCREASE (1)
FIT FLOW INDICATOR TRANSMITTER E
DIGITAL OUTPUT Copyright Reserved
3. ARRANGE PIPING IN TUNNELS AND PUMP STATIONS, ETC. ADJACENT TO STANCHIONS FOR
D HOUSES IN STRAIGHT LINES, PARALLEL TO SUPPORT.
FQ FLOW METER
E VOLTAGE SENSOR (PRIMARY ELEMENT) The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
FS FLOW SWITCH PURGE OR FLUSHING DEVICE - any errors or omissions shall be reported to Stantec without delay.
WALLS AND OTHER STRUCTURES, WITH A FT FLOW TRANSMITTER FAIL, FORWARD The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
MINIMUM OF BENDS AND FITTINGS. 23. PLACE ISOLATION VALVES IN HORIZONTAL RUNS P ANALOG INPUT F FLOW RATE RATIO (FRACTION)
(1) use for any purpose other than that authorized by Stantec is forbidden.
FV FLOW VALVE
WHENEVER POSSIBLE. FY FLOW TRANSDUCER
4. USE MITER JOINTS ONLY ON LARGER PIPE. HS HAND SWITCH G GLASS, VIEWING DEVICE Legend
24. ALWAYS PLACE SWING CHECK VALVES ON LAH LEVEL ALARM HIGH ORIFICE PLATE C/W ORIFICE FLANGES H HAND OPEN
HIGH (OPENED),
5. PROVIDE FLANGES, UNIONS, COUPLINGS, OR HORIZONTAL PIPE RUNS. BALL CHECK VALVES LAL LEVEL ALARM LOW FAST
ANALOG OUTPUT
OTHER CONNECTIONS THAT CAN BE READILY SHOULD BE PLACED IN VERTICAL RUNS. LC LEVEL CONTROLLER
DISASSEMBLED AT THE INTERVALS SPECIFIED FI FLOW INDICATOR ROTAMETER TYPE CURRENT (ELECTRICAL)
LE LEVEL ELEMENT I INDICATE
TO PROVIDE FOR DISASSEMBLY. 25. LOCATE VALVES WITHIN 1.8 METRES OF LG LEVEL GLASS
OPERATING FLOOR WHENEVER POSSIBLE. LI LEVEL INDICATOR TURBINE OR PROPELLER TYPE J POWER SCAN
PULSE INPUT
6. ARRANGE PIPING INLETS AND OUTLETS FROM WHEN LOCATING VALVES IN TRENCH, PROVIDE LS LEVEL SWITCH PRIMARY ELEMENT
EQUIPMENT SO THAT EQUIPMENT CAN BE VALVE STEM EXTENSIONS TO OPERATING TIME RATE OF
LT LEVEL TRANSMITTER K TIME, TIME SCHEDULE CONTROL STATION
REMOVED WHEN NECESSARY FOR FLOOR LEVEL AND TERMINATE IN OPERATING CHANGE
LIT LEVEL INDICATOR TRANSMITTER
REPLACEMENT OR MAINTENANCE WITHOUT HATCH. WHEN LOCATING VALVES ABOVE 1.8 LV LEVEL VALVE ANNUBAR OR PITOT TUBE LOW (CLOSED),
MODULATING DIGITAL OUTPUT L LEVEL LIGHT CLOSE
DISRUPTING PIPE INSTALLATION. TO THE METER HEIGHT, PROVIDE CHAIN OPERATOR. LY LEVEL TRANSDUCER SLOW
DEGREE POSSIBLE, DO NOT RUN PIPING OVER EXTEND CHAIN TO 1200 mm ABOVE FLOOR MV MOTORIZED VALVE
M MAGNETIC FLOW METER MIDDLE OR
EQUIPMENT WHERE IT MAY INTERFERE WITH LEVEL AND DRAPE OUT OF WAY OF TRAFFIC. M MOTION (1) MOMENTARY MOTOR (1) Notes
PAH PRESSURE ALARM HIGH INTERMEDIATE
LIFTING. DO NOT USE CHAIN OPERATOR ON VALVES 75 PAL PRESSURE ALARM LOW
mm OR SMALLER. ON OR OPERATE
PC PRESSURE CONTROLLER N
(1)
7. PROVIDE CLEANOUTS AT INDICATED LOCATIONS PE PRESSURE ELEMENT VORTEX FLOW METER
AND AT INTERVALS ON PIPING SPECIFIED. 26. WHERE VALVES MUST BE USED TO ISOLATE A PI PRESSURE INDICATOR O ORFICE, RESTRICTION OVERLOAD (1)
PROVIDE A DRAIN CONNECTION AT ALL LOW LINE IN THE EVENT OF A FIRE OR OTHER PIT PRESSURE INDICATOR TRANSMITTER U
POINTS AND A VENT CONNECTION AT HIGH SAFETY INCIDENT, LOCATE CLOSE TO AN AREA PS PRESSURE SWITCH ULTRASONIC FLOW METER P PRESSURE POINT (TEST) CONNECTION PUMP (1)
POINTS. ACCESS POINT. PSV PRESSURE RELIEF VALVE INTERGRATE,
PT PRESSURE TRANSMITTER Q QUANTITY (2)
TOTALIZE
8. SUPPORT PIPING IN PIPE RACKS WHEREVER 27. PROVIDE ACCESS FOR LIFTING EQUIPMENT FOR PV PRESSURE VALVE V-CONE DIFFERENTIAL
POSSIBLE. ARRANGE PIPE RACKS IN TUNNELS LARGE VALVES OVER 50 KG. PY PRESSURE TRANSDUCER R RADIATION RECORD REVERSE
SO THAT THE CLEAR OPEN SPACE IS TAHH TEMPERATURE ALARM HIGH
CONTINUOUS AND A MINIMUM OF 2.5 METRES 28. ARRANGE PIPING AND VALVES OR OTHER S SPEED, FREQUENCY SAFETY SWITCH
TAH TEMPERATURE ALARM HIGH HIGH FIELDBUS INTERFACE INCLUDED IN MCC PACKAGE
WIDE. ARRANGE PIPING SO THAT THE BOTTOM APPURTENANCES SO THAT THE UPSTREAM OR TAL TEMPERATURE ALARM LOW T TEMPERATURE TRANSMIT
OF PIPE RACKS OVER WALKWAYS IS A MINIMUM DOWNSTREAM PIPING HAS SUFFICIENT PLAY TO TC TEMPERATURE CONTROLLER
OF 2.0 METRES ABOVE THE FINISHED FLOOR ENABLE THE VALVES OR APPURTENANCES TO TE TEMPERATURE ELEMENT INSTRUMENTS AND/OR CONTROLS INCLUDED MULTIFUNCTION
U MULTIVARIABLE (2) MULTIFUNCTION (2) MULTIFUNCTION (2)
ELEVATION AND PREFERABLY, 2.5 METRES BE EASILY REMOVED. TI TEMPERATURE INDICATOR IN EQUIPMENT PACKAGE (2)
C ABOVE FINISHED FLOOR ELEVATION. IN TS TEMPERATURE SWITCH VIBRATION,
STAIRWAYS, ENSURE THAT THE PIPING IS A 29. FOR DIGESTER GAS AND NATURAL GAS, TT TEMPERATURE TRANSMITTER V VALVE, DAMPER, LOUVER
MECHNICAL ANALYSIS
MINIMUM OF 2.35 METRES ABOVE FINISHED PROVIDE SPECTACLE FLANGES AT ISOLATION TV TEMPERATURE VALVE
FLOOR ELEVATION. POINTS TO ALLOW SAFE POSITIVE SYSTEM TW THERMOWELL W WEIGHT, FORCE WELL
SHUTDOWN. TY TEMPERATURE TRANSDUCER
9. LOCATE VALVES, GAUGES, STRAINERS, AND
RELAY FUNCTION DESIGNATORS X UNCLASSIFIED (2) UNCLASSIFIED (2) UNCLASSIFIED (2) UNCLASSIFIED (2)
XAH LIMIT ALARM HIGH
OTHER APPURTENANCES WHERE ACCESSIBLE 30. FOR PIPES LESS THAN 65mm, SUPPORT ON XAL LIMIT ALARM LOW
FOR MAINTENANCE. RACKS OR TRAPEZES, PROVIDE HALF PIPE XV SOLENOID VALVE EVENT, STATE,
RELAY, COMPUTE, CONVERT
Y
>
M
CRADLES AT SUPPORTS, MANUFACTURED OF ADD HIGH SELECT PRESENCE
XY LIMIT SWITCH
10. GENERALLY ARRANGE PIPING SO THAT THERE MALLEABLE MATERIAL. ZA POSITION ALARM DRIVER, ACTUATOR,
IS A MINIMUM OF 0.75 METRE CLEAR AROUND ZS POSITION SWITCH SUBTRACT < LOW SELECT Z POSITION, DIMENSON UNCLASSIFIED FINAL CONTROL
EQUIPMENT ON TWO SIDES AND 1.5 METRES ON 31. PROVIDED COVER PLATES FOR ALL OPENINGS ELEMENT
ONE SIDE. PROVIDE ADDITIONAL SPACE AS IN WALLS OR FLOORS LEFT AFTER REMOVAL OF BIAS ANALOG TO DIGITAL
REQUIRED FOR SPECIAL EQUIPMENT WHERE EQUIPMENT PER PROCESS STANDARD DETAILS. A/D
THIS SPACE IS NECESSARY TO REMOVE % By Appd YYYY.MM.DD
GAIN OR ATTENUATE REV REVERSE (1) USER'S CHOICE
Revision
EQUIPMENT PARTS (PERISTALTIC OR 32. VERIFY ALL PENETRATIONS THROUGH
CHANNELS OR WALLS PRIOR TO ANY CORING. EXTRACT SQ ROOT (2) WHEN USED, SYMBOL OR SIGNAL LINE IS ANNOTATED
PROGRESSIVE CAVITY PUMPS, BOILERS, HEAT E/P POTENTIAL TO PNEUMATIC
EXCHANGERS, ETC.).
33. ALL ANCHOR BOLTS STAINLESS STEEL.
DIVIDE I/P CURRENT TO PNEUMATIC
11. ALLOW SPACE FOR FUTURE LINES NOTED ON FUNCTION DESIGNATIONS AND ABBREVIATIONS
THE DRAWINGS. 34. ADHESIVE ANCHOR BOLT SYSTEM, HILTI HVA OR C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
X MULTIPLY E/I POTENTIAL TO CURRENT
APPROVED EQUAL. B For Review ML/DM SSS 2021.12.03
12. STAGGER FLANGES IN PIPING, WITH A MINIMUM
INSTRUMENT DESIGNATIONS HAND SWITCH DESIGNATIONS A For Review ML/DM SSS 2021.09.20
OF 300 mm CLEARANCE FROM SUPPORTS. 35. AFTER REMOVAL OF EQUIPMENT, 1:1 BOOST
GAIN OR ATTENUATE (INPUT:OUTPUT) Issued By Appd YYYY.MM.DD
APPURTENANCES, ETC. OR MAKING NEW CUTS K ES EMERGENCY STOP
13. ARRANGE SO THAT FIELD WELDS AND OTHER OR HOLES IN EXISTING CONCRETE FR FORWARD-REVERSE
-K GAIN AND REVERSE
JOINTS ARE AT LEAST 200 mm FROM SUPPORTS, STRUCTURES, REFINISH CONCRETE SURFACES, FS FAST-SLOW File Name: 165620209-DI001 AS SSS SSS 2020.08.06
WALLS, OR OTHER STRUCTURAL ELEMENTS FILL IN OLD BOLT HOLES ETC. PER STRUCTURAL INSTRUMENT TAG NUMBERS & INDENTIFICATION ADD OR SUM (ADD AND SUBTRACT) HOA HAND-OFF-AUTO Dwn. Dsgn. Chkd. YYYY.MM.DD
THAT OBSTRUCT WORK ON THE PIPELINE. STANDARD DETAILS. HORA HAND-OFF-REMOTE-AUTO
FUNCTIONAL IDENTIFICATION CODE SUBTRACT (DIFFERENCE) J JOG
725-FCV-0714A
14. AT WALL PENETRATIONS, EXTEND PIPE A (SEE ABOVE) LOR LOCAL-OFF-REMOVE Permit/Seal
MINIMUM OF 150 mm FROM THE WALL TO ALLOW EXTRACT SQUARE ROOT
LR LOCAL-REMOTE
THE JOINT TO BE MADE. ADDITIONAL IDENTIFICATION OC OPEN-REMOVE
(SEE ABBREVIATION LIST) DIVIDE
OO ON-OFF
15. PROVIDE FOR THERMAL EXPANSION OF PIPING F(X) CHARACTERIZE SIGNAL
INSTRUMENT SYMBOLS xx xx OOA ON-OFF-AUTO
B IN SUPPORT SYSTEMS AND PIPING DESIGN. FCV
REFER TO THE SPECIFICATIONS. OCR ON-OFF-REMOTE
HIGH-SELECT
xxxx OOR ON-OFF-REMOTE
16. IN PIPE RACKS, PLACE SMALLER PIPE ON LOW-SELECT
HIGHER RACKS. GENERALLY PLACE SLUDGE
LINES FURTHEST FROM THE WALL AND CLEAN MULTIPLY
CONTROL SEQUENTIAL LOOP IDENTIFIER
WATER LINES CLOSEST TO THE WALL. ALSO, FIELD LOCAL UNIQUE NUMBER ASSIGNMENT INTEGRATE (TIME INTEGRAL)
PLACE LARGEST LIQUID FILLED PIPES CLOSEST ROOM
MOUNTED PANEL
TO THE SUPPORTS (WALL OR STANCHIONS) TO PANEL PROCESS AREA NUMBER METHANE
REDUCE BENDING STRESS IN STRUCTURAL
SUPPORTS. CHLORINE RESIDUAL POWER SUPPLY ABBREVIATIONS
Client/Project Logo
17. PROVIDE CLEARANCES BETWEEN PIPES DISCRETE SD* CARBON DIOXIDE AS AIR SUPPLY
ACCORDING TO THE FOLLOWING GUIDELINES: INSTRUMENTS ES ELECTRIC SUPPLY
· - MINIMUM DISTANCE BETWEEN PIPE EXTERIOR DO DISSOLVED OXYGEN
GS GAS SUPPLY
(INCLUDING INSULATION) WHERE NEITHER PIPE LOWER EXPLOSIVE LIMIT HS HYDRAULIC SUPPLY
LEL
IS FLANGED OR VICTAULIC COUPLED - 75 mm.
NS NITROGEN SUPPLY
· - MINIMUM DISTANCE BETWEEN PIPE EXTERIOR MCC MOTOR CONTROL CENTRE
WHERE ONE OR BOTH PIPES ARE VICTAULIC SHARED DISPLAY SHARED SS STEAM SUPPLY
COUPLED - 50 mm PLUS THE OFFSET DISTANCE CONTROL eg. DCS = MLSS MIXED LIQUOR SUSPENDED SOLIDS WS WATER SUPPLY
OF LARGEST PIPE VICTAULIC COUPLING. DISTRIBUTED CONTROL OXYGEN (PURITY) POWER SUPPLY SOURCE LABEL.
· - MINIMUM DISTANCE BETWEEN PIPE EXTERIOR AS
SYSTEM USED ONLY WHERE NECESSARY TO
WHEN PIPE IS FLANGED - 50 mm PLUS THE pH pH CELL HELP CLARIFY AN INSTRUMENT OR
OFFSET DISTANCE OF THE FLANGE ON THE
SYSTEM FUNCTION. Client/Project
\\cd1223-f01\01656\active\165620209\design\drawing\process\amherstburg wtp\pid dwg\pi\165620209-di001
LARGEST PIPE. TURB TURBIDITY

· - INCREASE THIS DISTANCE AS NECESSARY
WHERE JUMP OVERS OR RUN UNDERS ARE
COMPUTER The Coorporation of the
FUNCTION eg. FLOW METER SB SLUDGE BLANKET
USED. Town of Amherstburg
18. ENSURE THAT LOWEST POINT OF CROSSING
PIPES IS SET AT AN ELEVATION AT LEAST 75 mm
XXX XXX XXX
ABOVE EXTERIOR WALL OF LOWER PIPE IF NOT
FLANGED OR VICTAULIC COUPLED, 50 mm
PROGRAMMABLE 3 4 SCADA Upgrades
LOGIC CONTROL 1
ABOVE TOP OF FLANGE IF FLANGED, OR 50 mm
ABOVE TOP OF VICTAULIC COUPLING IF JOINED
(PLC) (RTU) 2 415 Front Rd N., Amherstburg, ON, N9V 2V5
5 6
A USING THIS METHOD.
19. ENSURE THAT THERE IS SUFFICIENT VERTICAL Title

* SUBSCRIPT ABBREVIATION SPECIFIES INSTRUMENT
ROOM, PLUS 100 mm BETWEEN RACKS TO
ALLOW THE LARGEST PIPE TO BE REMOVED FUNCTION OR LOCATION. P&ID
FROM THE RACK WITHOUT DISTURBING THE
RACK OR PIPES ABOVE.
eg. IP#1 (INSTRUMENT PANEL #1), SD (SHUTDOWN)
Legend
Project No. Scale

165620209
2022.05.03 11:20:55 AM

of
DI-001
1 2 3 4 5
PUMP SYMBOLS SCREEN SYMBOLS PIPE ACCESORY SYMBOLS VALVE SYMBOLS FLOW DIRECTION
M M M M M FLEXIBLE HOSE (TT)
M BACK PRESSURE VALVE FCV PRESSURE RELIEF/

ROTARY SCREEN FLEXIBLE TUBE (CU) BPV PRESSURE SUSTAINING,
PR/PS CONTROL VALVE
FLEXIBLE CONNECTOR (SS) PRESSURE REDUCING Stantec Consulting Ltd.
PDV
S London ON N6A 5J7
FLEXIBLE HOSE FCV BACK PRESSURE/
DIAPHRAGM OPERATED
PRESSURE BALANCE SOLONOID S/O Tel: 519.645.2007
CENTRIFUGAL PUMP GRINDER PUMP CHOPPER PUMP VERTICAL CENTRIFUGAL BLOWER GEAR PUMP DIAPHRAGM PUMP BP/SOV CONTROL VALVE www.stantec.com
CENTRIFUGAL PUMP FAN OR COMPRESSOR
Y-STRAINER DIAPHRAGM OPERATED
MANUAL BAR SCREEN SPRING Copyright Reserved
D M (PLAN)
FCV DIFFERENTIAL The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
PRESSURE RELIEF, - any errors or omissions shall be reported to Stantec without delay.
M STRAINER, BASKET TYPE PRESSURE RELIEF
DPR CONTROL VALVE The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
M PRV
M use for any purpose other than that authorized by Stantec is forbidden.
GATE VALVE
PROGRESSIVE CAVITY M STRAINER, GTV Legend
M PUMP MECHANICAL BAR SCREEN DUPLEX BASKET KNIFE GATE VALVE
FCV PRESSURE REDUCING/
M TYPE KNV PRESSURE SUSTAINING,
PD/PS CONTROL VALVE
CHEMICAL DIAPHRAGM SEAL BALL VALVE
BLV
PLV PLUG VALVE

DIAPHRAGM SEAL FCV
METERING PUMP CHEMICAL FEED MACERATOR ROTARY LOBE RATE OF FLOW CONTROL
LOW HEAD PERISTALTIC PUMP PISTON PUMP GLOBE VALVE
PUMP GLV RFC CONTROL VALVE
PROPELLER PUMP PUMP
REMOVABLE SPOOL PIECE
DIAPHRAGM VALVE
FCV
OPEN DRAIN BUTTERFLY VALVE Notes
M BFV
ALT
ALTITUDE,
CONTROL VALVE
SWING CHECK VALVE
M M M
SCV
DRUM SCREEN CORPORATION COCK SILENT CHECK GLOBE VALVE
M M
CHV
M M MIXER SYMBOLS PCV PISTON CHECK VALVE

SAMPLE DRAIN
WCV WAFER CHECK VALVE

STATIC MIXER
CARTRIDGE FILTER FMV FLOW MONITOR VALVE

INLINE MIXER
BOOSTER PUMP VERTICAL TURBINE VERTICAL TURBINE SUBMERSIBLE SUMP PUMP SUBMERSIBLE POSITIVE ROTARY LOBE STOP CHECK VALVE (COCK)
SCV
PUMP PUMP WELL PUMP PUMP DISPLACEMENT BLOWER
C (OPEN SHAFT) (ENCLOSED SHAFT) BLOWER SILENCER BALL CHECK VALVE
BCV
SURFACE MIXER
DOUBLE LEAF CHECK VALVE
MECHANICAL SEPARATOR
METER SYMBOLS FGV FLAP GATE VALVE
BACK FLOW PREVENTER (BALL)

FIT/FE FIT/FE FIT/FE FIT/FE FIT/FE FIT/FE FIT/FE FLASH MIXER
QUICK DISCONNECT COUPLING
BFP
03 03 03 03 03 03 03
BACK FLOW PREVENTER (GATE)
U BFP
M TRAP By Appd YYYY.MM.DD
T Revision
MAGNETIC ROTA TURBINE OR VORTEX PITOT DOPPLER ULTRASONIC AINV ANGLE VALVE (AIR RELEASE)
FLOW FLOW PROPELLER FLOW FLOW FLOW FLOW FLOW
MECHANICAL FLOCCULATOR HOSE CONNECTION
ANV ANGLE VALVE
(BIBB) UP TO 25 mm DIA.
GATE SYMBOLS PIPE CONNECTION SYMBOLS PINCH VALVE
HOSE CONNECTION PNV A For Review ML/DM SSS 2021.09.20
(BIBB) 30 mm DIA. OR By YYYY.MM.DD
WRP WEIR LARGER FLAME CHECK Issued Appd
CAPPED LINE VICTAULIC FLANGE CONNECTION
VICTAULIC JOINT TANK MIXER File Name: 165620209-DI001 AS SSS SSS 2020.08.06
WEIR GATE PLUGGED LINE CAPPED CONNECTION FLAME ARRESTER VALVE
WRG CONNECTION (RIGID) Dwn. Dsgn. Chkd. YYYY.MM.DD
UNION VICTAULIC JOINT
STOP LOG CONNECTION (FLEXIBLE)
STL PLUMBING SYMBOLS FLOAT VALVE
SLIP ON FLANGE CONNECTION VICTAULIC JOINT CONNECTION FLUSHING CONNECTION
Permit/Seal
(FOR POLYETHYLENE PIPE)
STP STOP PLATE BLIND FLANGE FOOT VALVE
CONCENTRIC REDUCER
WELD NECK FLANGE
B SLIDE GATE (N.O.) ECCENTRIC REDUCER ROTARY VALVE
SLG CONNECTION VALVE SYMBOLS (Cont'd)
IF
INSULATING FLANGE
SLG SLIDE GATE (N.C.) EXPANSION JOINT EMERGENCY EYE NEEDLE VALVE
NEV
WELDED CONNECTION WASH/SHOWER
CYLINDER OPERATED VALVE
SCG SLUICE GATE (N.O.)
SCREWED CONNECTION THREE-WAY VALVE
SLUICE GATE (N.C.) BELL & SPIGOT JOINT

SCG
CLOSURE COUPLING CYLINDER SINGLE ACTING 4 - WAY VALVE
MECHANICAL JOINT
LEVEL CONTROL GATE Client/Project Logo
DRESSER COUPLING EJECTOR OR EDUCTOR
TELESCOPIC GATE VALVE EMERGENCY EYE WASH CYLINDER DOUBLE ACTING
STRAUB COUPLING
FLANGE ADAPTOR
FLAP GATE MDV MUD VALVE
FGV
CYLINDER DOUBLE ACTING
WITH POSITIONER
P NC
PRESSURE SWITCH SYMBOL TRUCK SYMBOLS NORMALLY CLOSED
FIRE HOSE
NO
NORMALLY OPEN Client/Project
PI PSH
1841 1841 COMBINATION AIR VALVE
MANUAL OPERATOR
HOSE REEL Town of Amherstburg
PRESSURE SWITCH
SQUARE NUT OPERATOR Amherstburg WTP Electrical &
CALIBRATION COLUMN SYMBOLS SCADA Upgrades
TRUCK LOADING 1 M
AIR RELEASE VALVE MOTORIZED VALVE
ANALYZER PANEL 415 Front Rd N., Amherstburg, ON, N9V 2V5
A S
PI
SOLENOID VALVE
- Title
AIT
-
AIR AND VACUUM VALVE S
P&ID
ANALYZER PANEL
SOLENOID VALVE (3 WAY)
Legend
S
AE AE SOLENOID VALVE (4 WAY)

- - Project No. Scale
V/AIR VALVE
pH Cl
165620209
2022.05.03 11:20:56 AM
TYPE 1 TYPE 2 TYPE 3

CHECK VALVE (DUCK BILL)
TRUCK LOADING 2

of
DI-002
1 2 3 4 5
PROCESS DRAWINGS PIPING PROCESS CODE ABBREVIATIONS FUNCTION CODE ABBREVIATIONS

ACETIC ACID ACET POLYMER POLY AERATOR, SURFACE AES GAS FLARE GF SCUM RAKE ASSEMBLY SCD
EXIST. PIPING, > 75 mm DIA. ACETYLENE ACTL POTASSIUM PERMANGANATE KMNO AERATION TANK AER GAS WATER HEATER GWH SEPARATOR SEP
ACTIVATED CARBON - GRANULAR CA POWDERED ACTIVATE CARBON PAC AFTERCOOLER AFC GATE, FLAP FLAG SIGHTGLASS SG Stantec Consulting Ltd.
EXIST. PIPING, < 75 mm DIA AERATION AER PRE-AERATION PAER AIR DRYER AID GATE, SLIDE SLG SILENCER SIL 171 Queens Avenue, 6th Floor
AERATION AIR/PROCESS AIR AA PRESEDIMENTATION PSED AIR FILTER AF GATE, SLUICE SLUG SLUDGE COLLECTOR, CIRCULAR SLC
London ON N6A 5J7
NEW PIPING, > 75 mm DIA. AIR WASH AW PRIMARY CLARIFICATION PCLR AIR RECEIVER AR GATE, STOP STG SLUDGE COLLECTOR, STRAIGHT LINE SLC
Tel: 519.645.2007
ALUMINUM SULFATE ALUM PRIMARY EFFLUENT PREF AIR SEPARATOR AS GATE, WEIR WRG SLUDGE GRINDER SLG
NEW PIPING, < 75 mm DIA GENERATOR (BACKUP POWER)
www.stantec.com
ANHYDROUS AMMONIA NH3 PRIMARY INFLUENT PRIN AIR STRIPPER AST GEN SLUDGE SCREEN-INLINE SCR
AQUA AMMONIA NHOH PRIMARY SCUM PRSC AERATION MEMBRANE/AIR BLOWER MBB GRAVITY BELT THICKENER GBT SOLIDS BLENDER-INLINE SBL
EXISTING PIPING TO BE REMOVED ARGON AR PRIMARY SLUDGE PRS AIR MIXING BLOWER, GRIT ABL GRAVITY THICKENER GVT STRAINER -Y TYPE STR Copyright Reserved
D ASH ASH RAW WASTEWATER RWW BACKFLOW PREVENTER GBB GRINDER GDR STRAINER - BASKET TYPE STR The Contractor shall verify and be responsible for all dimensions. DO NOT scale the drawing
EXISTING EQUIPMENT BACKWASH SUPPLY BWS RECIRCULATED SLUDGE RCS BASIN, AERATION BFP GRIT BASIN, AERATED OR VORTEX TYPE GRB SURGE CHAMBER SRCH - any errors or omissions shall be reported to Stantec without delay.
TO BE REMOVED BACKWASH WASTE BWW RECLAIMED WATER RCW BASIN, ANOXIC BSN GRIT COLLECTOR, VORTEX VGC TANK, AERATION ATK The Copyrights to all designs and drawings are the property of Stantec. Reproduction or
BIOSOLIDS BIOS REFRIGERANT R BASIN, CHLORINE CONTACT BSN HEAT EXCHANGER HEX TANK, BIOSOLIDS STORAGE BTK
BLENDED SLUDGE BLS RESIDUALS WRES BELT FILTER PRESS BSN HEATING WATER BOILER BLR TANK, CHEMICAL DAY TANK CDT
BYPASS BYP RETURN ACTIVATED SLUDGE RAS BIN ACTIVATOR BFPS HOIST, CHAIN HST TANK, CHEMICAL STORAGE CST
Legend
LEGEND FOR PROCESS FLOW CARBON DIOXIDE CO2 SCREENINGS SCRS BIN, CLOSED TOP BA HOIST, WIRE ROPE HST TANK, ELEVATED STORAGE ELST
CARBON SLURRY CASR SECONDARY CLARIFICATION SCLR BIN, LIVE BOTTOM BIN HYDRANT, FIRE HYD TANK, GRIT REMOVAL AGT
AND INSTRUMENTATION DIAGRAMS BIN HYDRANT, WALL
CAUSTIC CAU SECONDARY EFFLUENT SCEF BIN, OPEN TOP HYD TANK, PRESSURE/EXPANSION PTK
CENTRATE CEN SECONDARY INFLUENT SCIN BIN, SLIDING FRAME BIN HYDROCYCLONE HYC TANK, PRIMARY CLARIFIER CLT
INSTRUMENT SIGNAL CHLORINE CL SECONDARY SCUM SCSC BOILER BLR INJECTOR, CHEMICAL INJ TANK, SLUDGE HOLDING SHT
PRIMARY PIPING LINES CHLORINE DIOXIDE CLO2 SEPTAGE SEPT CALIBRATION COLUMN CCLM LIME SLAKER LS TRAP, DRIP TRP
CITIRC ACID CIT SETTLED WATER SET CENTRIFUGE CEN METER, MAGNETIC FLOW FE TRAP, SEDIMENT TRP
PRIMARY PIPING LINES EXISTING
COMPRESSED AIR - INSTRUMENT IA SEWAGE SEW CHEMICAL FEEDER CHF METER, WATER WM TURBIDIMETER TB
PRIMARY PIPING LINES FUTURE COMPRESSED AIR - SERVICE SA SLUDGE - DIGESTER DS CHEMICAL TRANSFER (PROGRESSIVE CAVITY) PUMP CFP MEMBRANE, MICROFILTRATION MB VACUUM REGULATOR VRG
SECONDARY PIPING LINES COPPER SULFATE CUSO SODA ASH NACO CHEMICAL FEED (METERING) PUMP CMP MEMBRANE, NANOFILTRATION MB VALVE, ANGLE ANV
DEWATERING DWTR SODIUM ALUMINATE NAAL CHLORINATOR CHL MEMBRANE, REVERSE OSMOSIS MB VALVE, AIR RELEASE ARV
SECONDARY PIPING LINES EXISTING
DIESEL FUEL DF SODIUM ALUMINATE SALM CHLORINE CONTACT CHAMBER CCC MEMBRANE, ULTRAFILTRATION MB VALVE, AIR-VACUUM VRV
SECONDARY PIPING LINES FUTURE
DIGESTER DIG SODIUM BICARBONATE NABC CHLORINE GAS SCRUBBER EGS MIXER, STATIC INLINE SMX VALVE, BALL BLV Notes
UTILITY PIPING LINES DIGESTER GAS DG SODIUM BISULFITE NAHS CLARIFIER, PRIMARY CLR MIXER MX VALVE, BUTTERFLY BFV
UTILITY PIPING LINES EXISTING DIGESTER GAS MIXING DGM SODIUM CHLORIDE SCL CLARIFIER, SECONDARY SEC MIXER, POLYMER PMX VALVE, CHECK CHV
DISINFECTION CONTACT BASIN DCB SODIUM HEXAMETAPHOSPHATE NAHX CLASSIFIER, GRIT GRC OVERFLOW ROOF DRAIN ORD VALVE, DIAPHRAGM OPERATED OPEN OR CLOSE V
UTILITY PIPING LINES FUTURE ODU V
DISSOLVED AIR FLOTATION DAF SODIUM HYDROXIDE NAOH CLEARWELL CW OZONE DESTRUCT UNIT VALVE, DIAPHRAGM OPERATED WITH POSITIONER
(E) EXISTING DRAINAGE DRN SODIUM HYPOCHLORITE NAOC COMPACTOR CMPT OZONE GENERATOR OGEN VALVE, DOUBLE DISC CHECK DCV
(F) FUTURE ENGINE EXHAUST EXH SODIUM SILICOFLUORIDE NASF COMPRESSOR CMP PARTIAL FLUME PRF VALVE, EXPLOSION RELIEF ERV
EQUALIZATION BASIN EQB STEAM STM CONTAINER, PROCESS (GRIT, SCREENINGS, ETC.) CTR PARTICLE COUNTER PCN VALVE, GATE GTV
(S) PRE SELECTED EQUIPMENT
FERRIC CHLORIDE FECL STORM SEWER STS CONVEYOR, BELT CON PELLETIZER PLT VALVE, GLOBE GLV
YH YARD HYDRANT FERRIC SULFATE FESF STORM WATER STW CONVEYOR, SCREW SSC PLANT SERVICE WATER PUMP PLP VALVE, GLOBE SILENT CHECK CHV
FERROUS CHLORIDE FRCL SULFUR DIOXIDE SO2 CRANE CR PLATE SETTLER PSE VALVE, KNIFE GATE KNV
REMOVAL FERROUS SULFATE FRSF SULFURIC ACID HSO4 DEWATERING SCREW DWS POLYMER, DOSING SYSTEM PPD VALVE, MIXING MXV
FILTRATION FLTR SURFACE WASH SW DIAPHRAGM SEAL DPS POLYMER, MAKE-UP SYSTEM PMS VALVE, MUD MDV
VENDOR PACKAGE BOUNDARY GASEOUS OXYGEN GOX SUPERNATANT SUP DIFFUSER DIF POWER SUPPLY UNIT PSU VALVE, PISTON OPERATED POV
GASOLINE GASL TERTIARY EFFLUENT TREF DIFFUSER BANK DC PRESSURE TANK PTK VALVE, PISTON OPERATED WITH POSITIONER POV
GREASE GR TERTIARY INFLUENT TRIN DIGESTER, AEROBIC DIG PUMP, BACKWASH BWP VALVE, PLUG PLV
MATCH LINE No.
GRIT GRT THICKENED PRIMARY SLUDGE TPRS DIGESTER, ANAEROBIC PRIMARY DIG PUMP, DRAIN DRP VALVE, PRESSURE RELIEF PRV
C HELIUM HEL THICKENED WASTE ACTIVATED SLUDGE TWAS DIGESTER, ANAEROBIC SECONDARY DIG PUMP, DRAIN PROCESS PDP VALVE, PRESSURE/VACUUM RELIEF PRV
2 DI102 HYDRAULIC FLUID HYFL THICKENING THCK DIGESTER COVER, FIXED DC PUMP, CENTRATE/DECANT SUP VALVE, PRESSURE REGULATING PRV
HYDROCHLORIC ACID HCL TREATED WATER TW DIGESTER COVER, FLOATING DC PUMP, EFFLUENT WATER/SERVICE WATER EWP VALVE, SAFETY SFV
HYDROFLUOSILIC ACID (FLUORIDE) HFSA TRICKLING FILTER TF DIGESTER COVER, MEMBRANE DC PUMP, HIGH LIFT HL VALVE, SOLENOID SOV
MATCH SHEET No. IDENTIFIER H ULTRAVIOLET UV DIGESTER COVER, GAS HOLDER DC PUMP. LOW LIFT LL VALVE, SWING CHECK SCV
HYDROGEN
HYDROGEN PEROXIDE H2O2 VACUUM VAC DISINFECTION UNIT, UV UV PUMP, MIX LIQUOR MLP VALVE, THERMAL SHUTOFF TSV
DI102 5 PROCESS LINE GOING TO OR FROM INCINERATION INC VENT VT DISINFECTION, UV AUTOMATIC LEVEL CONTROLLER ALC PUMP, PERMEATE RCP VALVE, THREE WAY VVR
ANOTHER SHEET LAPP WW DAF PUMP, RAW ACTIVATED SLUDGE RASP VALVE, VACUUM BREAKER VBV
LAND APPLICATION WASH WATER DISSOLVED AIR FLOTATION THICKENER EQUIPMENT
LIME - HYDRATED CAOH WASTE ACTIVATED SLUDGE WAS DUST COLLECTOR DUC PUMP, RAW SLUDGE RSP VALVE, VACUUM RELIEF VRV
T LIME - QUICKLIME CAO WASTE WASH WATER WWW ELECTRICAL DOMESTIC HOT WATER TANK EDWH PUMP, RECIRC SLUDGE/MIXING SRP VALVE, V-PORT BALL BVV
TIE IN POINT
LIME STABILIZATION LS WATER - CONDENSATE CDW EMERGENCY EYE WASH EEW PUMP, SCUM SCP VAPORIZER VAP
LIQUID OXYGEN LOX WATER - COOLING COLW EMERGENCY SAFETY SHOWER ESW PUMP, SLUDGE FEED SFP VICTAULIC FLANGE ADAPTER VFA
LP GAS OR PROPANE GAS LPG WATER - DISTILLED WATER DW EMERGENCY SHOWER & EYEWASH (COMBINED UNIT) ESE PUMP, SLUDGE LOAD-OUT SLP VICTAULIC COUPLING VC
METHANE GAS ME WATER - EFFLUENT EW EXPANSION CHAMBER EXC PUMP, SLUDGE TRANSFER STP WELL, VERTICAL WL
IDENTIFICATION SYSTEM MTHL WATER - FILTERED FW EV PUMP, SLUDGE PRIMARY PSP WELL, HORIZONTAL COLLECTOR WL Revision By Appd YYYY.MM.DD
METHANOL EVAPORATOR
MIXED LIQUOR MXL WATER - FILTRATE FILT FAN SUPPLY OR EXHAUST FAN PUMP, SUMP SMP WEIGHT SCALE WT
EQUIPMENT IDENTIFICATION VALVE IDENTIFICATION NATURAL GAS NG WATER - FIRE FIW FILTER, DISK FLT PUMP, WATER/BOOSTER WP WEIR, CIPOLETTI W
NITROGEN N2 WATER - IRRIGATION IRW FILTER SURFACE WASH FSW PUMP, WASTE ACTIVATED SLUDGE WASP WEIR, RECTANGULAR W
EQUIPMENT IDENTIFIER NO OZW FAR RESERVOIR RSV W
VALVE SIZE & NITROUS OXIDE WATER - OZONATED FLAME ARRESTER WEIR, V-NOTCH
VALVE TYPE ODOR CONTROL ODC WATER - SEAL SW FLAME CHECK FC RESIDUAL COLLECTOR RCO YARD HYDRANT YH
DRP 250-BFV
OIL - FUEL FO WATER - WATER HEATING HW FLOCCULATOR, HORIZONTAL FLC ROTAMETER RM
V-200 B For Review ML/DM SSS 2021.12.03
211 OIL - LUBRICATING LO WATER - DEIONIZED DEIW FLOCCULATOR, VERTICAL FLC RUPTURE DISK RD
OIL - WASTE WO WATER - NON-POTABLE NPW FLOOR DRAIN FD SAMPLER SAMP
PW SC Issued By Appd YYYY.MM.DD
TAG No. OZONE OZ WATER - POTABLE FLOW SPLITTER FS SCALE
SEQUENTIAL NUMBER AGS
OZONE DESTRUCT OZD WATER - RAW RW FLUME, PARSHALL PRF SCREEN, AUGER
REDUCER SIZE PERMEATE HPO4 WET WEATHER TREATMENT WWT FILTER SEPARATOR FTSP SCREEN, BAR BS File Name: 165620209-DI001 AS SSS SSS 2020.08.06
PHOSPHORIC ACID PER FOAM SEPARATOR FMSP SCREEN, DRUM DRS
350x100 PHOSPHATE PPP FLOW CONTROL VALVE FCV SCRUBBER SCU
POLYALUMINUM CHLORIDE PACL FLUSHING CONNECTION FC SCUM CHAMBER SCC
GAS CYLINDER CYL SCUM WEIR - ROTATING SCW
GFD
Permit/Seal
PIPE IDENTIFICATION GAS FEEDER
MISCELLANEOUS SYMBOLS
250-DRN-822-SS-ET+I
INSULATED
B
ELECTRIC TRACED LE
1804
LEVEL INDICATOR SECTION TAIL PIPE CONVERSION CHART GENERAL NOTES
PIPE MATERIAL METRIC EQUIVALENT METRIC EQUIVALENT METRIC EQUIVALENT METRIC EQUIVALENT
SIZE IMPERIAL SIZE IMPERIAL SIZE IMPERIAL SIZE IMPERIAL
(mm) (in) (mm) (in) (mm) (in) (mm) (in) 1. IN GENERAL, THE P & ID SYMBOLS AND DEVICE IDENTIFICATIONS ARE
LINE NUMBER
SECT. 3 1/8 65 2-1/2 500 20 1100 44 BASED ON INSTRUMENT SOCIETY OF AMERICA, STANDARD PRACTICE
SERVICE 6 1/4 80 3 550 22 1200 48 ISA-S5.1 (1988). SOME MODIFICATIONS, ADDITIONS, AND ALTERATIONS
FLOW DIRECTION ARROWS
10 3/8 90 3-1/2 600 24 1350 54 HAVE BEEN MADE AS NEEDED TO ACCOMMODATE THE PROJECT
PIPE SIZE (DIAMETER mm) 12 1/2 100 4 650 26 1500 60 REQUIREMENTS.
LSH SECTION BUBBLES 18 5/8 150 6 700 28 1650 66
ULTRASONIC LEVEL SENSOR 20 3/4 200 8 750 30 1800 72 2. SOME CONTROL AND INTERLOCK REQUIREMENTS WHICH CAN BE
-
25 1 250 10 800 32 2000 78 MORE CLEARLY ILLUSTRATED ON SCHEMATIC DRAWINGS HAVE BEEN Client/Project Logo
32 1-1/4 300 12 850 34 2100 84 OMITTED FROM THE P&ID DRAWINGS.
40 1-1/2 350 14 900 36
PIPE SPECIFICATION DATA SHEET 45 1-3/4 400 16 1000 40 3. THIS IS A GENERAL LEGEND SHEET. SOME SYMBOLS AND
1 1 1 1 50 2 450 18 1050 42
ABBREVIATIONS MAY NOT BE UTILIZED ON THIS SPECIFIC PROJECT.
ABS/DWV ABS 101 101 101 101 101 101 101 101
CAST IRON CI
4. PIPING AND EQUIPMENT LEGEND APPLIES TO P & ID SHEETS ONLY
CONCRETE PRESSURE PIPE CCP1 EXIST. NEW
SPEC CHANGE AND MAY DIFFER FROM LEGENDS FOR OTHER SHEETS.
CHLORINATED POLYVINYL CPVC LSH
CHLORIDE - LEVEL SWITCH 5. FOR THE FOLLOWING SYMBOLS REFER TO DWG. DI001, DI002 & DI003
CARBON STEEL CS1/CS2/CS3/CS4 1 SECTION - LINE SYMBOLS
- MECHANICAL EQUIPMENT SYMBOLS
CARBON STEEL PIPE CS/PP - VALVE AND GATE ACTUATOR SYMBOLS
NORTH
NORTH
101 101 1:1
Client/Project
POLYPROPYLENE LINED - MECHANICAL SYMBOLS

WALL
CARBON STEEL PIPE CS/PVDF - WASTE WATER PROCESS EQUIPMENT SYMBOLS The Coorporation of the
POLYVINYLIDENE FLUORIDE - CHEMICAL FEED EQUIPMENT SYMBOLS
LINED
COPPER CU1/CU2/CU3
CAPTION TITLE - PUMP AND BLOWER SYMBOLS
- EQUIPMENT IDENTIFICATION DESCRIPTION
Town of Amherstburg
GRADE - PIPELINE IDENTIFICATION DESCRIPTION
DUCTILE IRON DI1/DI2/DI3 1:1
- VALVE AND GATE SYMBOLS Amherstburg WTP Electrical &
FIBER REINFORCED PLASTIC FRP - PRIMARY ELEMENT & FITTING SYMBOLS
GALVANIZED CARBON STEEL GCS1/GCS2 SAMPLE BARSCALES NORTH ARROW - MATERIAL HANDLING EQUIPMENT SYMBOLS
SCADA Upgrades
FLOOR PENETRATION INSULATION COLD OR
HASTELLOY HT PERSONAL PROTECTION 415 Front Rd N., Amherstburg, ON, N9V 2V5
A HIGH DENSITY POLYETHYLENE HDP1/HDP2/HDP3 1 : 50
POLYETHYLENE PE 0000.000 500 0 1000mm
WATER LEVEL SYMBOL E Title
POLYVINYL CHLORIDE PVC1/PVC2/PVC3/PVC4
RUBBER RUB INSULATION P&ID
STAINLESS STEEL TYPE 304L SS1/SS2/SS3/SS4 TRACE - ELECTRIC
STAINLESS STEEL TYPE 316L SS5/SS6/SS7/SS8 2000

1 : 200
0 4000mm Legend
FIELD WELD SYMBOL
TEFLON TUBING (TC) TU1
POLYETHYLENE TUBING (TVP) TU2
TEFLON TUBING (PFA) TU3 Project No. Scale
INSULATION 165620209
2022.05.03 11:21:01 AM
TUBETRACE TUBING TU4

TRACE - STEAM OR GLYCOL

of
DI-003
1 2 3 4 5
LEVEL (CALCULATED)
DOWNSTREAM
DIFFERENTIAL
REFERENCE
RAW WATER
RAW WATER
RAW WATER
INLET WELL
INDICATION
INDICATION
INDICATION
INDICATION
UPSTREAM
COMMAND
CHLORINE
COMMAND
COMMAND
TURBIDITY
CONTROL
POSITION
POSITION
RUNNING
LOSS OF
LOSS OF
LOSS OF
RUNNING
SCREEN
SCREEN
SCREEN
OPENED
OPENED
CLOSED
REMOTE
REMOTE
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
POWER
MOTOR
POWER
MOTOR
SPEED
SPEED
COMM
COMM
FAULT
FAULT
FAULT
FAULT
ECHO
ECHO
ECHO
LEVEL
LEVEL
LEVEL
FLOW
ALUM
FLOW
RUN
RUN
PLC-1
PLC-1
RIO-2
RIO-2
RIO-2
RIO-2
RIO-1
RIO-2
RIO-2
RIO-2
LI LI LI LI LI LI LDI MD MN YN XA YA JI MD MN YN XA YA JI SI SC AI AI FI VH ZH ZL ZI ZC FI
10 10 11A 11B 11A 11B 11 TS-1 TS-1 TS-1 TS-1 TS-1 TS-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 1 8 1 TSV-1 RW-C1 RW-C1 RW-C1 RW-C1 10 171 Queens Avenue, 6th Floor
London ON N6A 5J7
AI DI AI AI DI DI DO DI DI DI DI AI DO DI DI DI DI AI AI AO AI AI AI DO DI DI AI AO AI Tel: 519.645.2007
www.stantec.com
EtherNet/IP EtherNet/IP
ST SP ST SP NTU CL2 Copyright Reserved

UIR-1
UIR-5
UIR-4
ZLH ZLL LI LDI HMS1 MLN HMS2 MLB MLF HMS1 MLN HMS2 MLB MLF AI AI FI ZLN ZLH ZLL FI - any errors or omissions shall be reported to Stantec without delay.
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
IG-1 IG-1 10 11 TS-1 TS-1 TS-1 TS-1 TS-1 LL-1 LL-1 LL-1 LL-1 LL-1 1 8 1 RW-C1 RW-C1 RW-C1 10
Legend
RST LR ST SP RST Electrical Proposed
SCADA Proposed
MCC-1
MCP-1
FCI-1
HMS MLF HMS1 HMS2 HMS3 HMS4 SI SC YN MN XA FIC ZC
GCP
GCP
Electrical Removals
TS-1 TS-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 LL-1 1 RW-C1
SCADA Removals
Existing
1 2 3 4 12 13 14 8 9 10 11 AIT 15 VH 16 17
8 TSV-1 Notes
5 6 7
LR ST SP RST CL2
1. Data Recorder UR-1:
MCC-1
1.1. Raw Water Turbidity HMS1 HMS2 HMS3 HMS4 YLN MLN XLA AE 8A
TS-1 TS-1 TS-1 TS-1 TS-1 TS-1 TS-1 8
1.2. Clarifier Turbidity
1.3. Plant Effluent Turbidity
1.4. Alum Flow DS
1.5. Pump Station 4 Flow HS2
2. Data Recorder UR-2: TS-1
AIT
2.1. Filter 1 Turbidity 1
2.2. Filter 1 Headloss (differential pressure)
C 2.3. Filter 1 Flow 8 NTU
2.4. Filter 2 Turbidity
AE
2.5. Filter 2 Headloss (differential pressure) 1
2.6. Filter 2 Flow
3. Data Recorder UR-3: 14
3.2. Filter 3 Headloss (differential pressure) BSP- 1
3.3. Filter 3 Flow LDI LDIT 13
11 11
3.5. Filter 4 Headloss (differential pressure)
LIT By Appd YYYY.MM.DD
4. Filter 4 Flow Data Recorder UR-4: 12 Revision
BSP- 2
4.1. Raw Water Flow LI
11
4.2. Plant Effluent Pressure 12 12
8 HOA
4.3. Plant Effluent Flow
4.4. Reservoir Level HOA LE HS C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
PS 8A 12 LL-3 B For Review ML/DM SSS 2021.12.03

4.5. New Water Tower Level HS A For Review ML/DM SSS 2021.09.20
TS-1 TS-1
5. Data Recorder UR-5: Issued By Appd YYYY.MM.DD
S SERVICE WATER
5.1. Pre Chlorine
5.2. Low Lift Chlorine DI604 112 File Name: 165620209-DI601 ML/DM SSS SSS 2020.07.15
M V
5.3. Post Chlorine Dwn. Dsgn. Chkd. YYYY.MM.DD
TSV- 1
5.4. Reservoir Chlorine LE LE
11A 11B Permit/Seal
5.5. Pre CL Test (tbc) TS- 1
7
Note: Not all data recorder signals shown. All

data recorder signals and recorders are to be LIT HOA
B removed. See above list of all recorders and LLC- 3 LLD- 3
LI 10 HS
signals. 3 LL- 3 10
10 LE LE LL-2
11A 11B LE
12
LE V
SD- 3
10
TRAVELING 6
SCREEN 2
WELL Client/Project Logo
LLW-1 LLC- 2 LLD- 2

SI- 2 LOW LIFT PUMP WELL HOA
LL- 2
LE
HS
10 9
4 LL-1
1
SB- 4 V
INLET FROM
IW-1
DETROIT RIVER
INLET WELL
5 15
Client/Project
IG- 1
Town of Amherstburg
LLC- 1 LLD- 1 16
LL- 1
FIT Amherstburg WTP Electrical &
1
SCADA Upgrades
ZC ZI ZSL ZSH
RW-C1 RW-C1 RW-C1 RW-C1
A
BS- 1
FROM FE Title
CHLORINE ROOM 1
204 DI606 TO CLARIFIERS
P&ID
M 102 DI602 Low Lift Pumping
PRE CHLORINE FM- 1 RW-C1
FT
206 DI606 17
10 FROM CHEMICAL Project No. Scale
ROOM (ALUM) 165620209
2022.05.03 11:21:12 AM
M DI605 201 Revision Sheet Drawing No.

FIT- 10

of
DI-601
1 2 3 4 5
REFERENCE
INDICATION
INDICATION
INDICATION
COMMAND
COMMAND
COMMAND
COMMAND
COMMAND
COMMAND
TURBIDITY
CLARIFIER
RUNNING
RUNNING
OPENED
OPENED
OPENED
OPENED
OPENED
CLOSED
CLOSED
CLOSED
REMOTE
REMOTE
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
POWER
POWER
MOTOR
MOTOR
SPEED
SPEED
COMM
COMM
FAULT
FAULT
FAULT
FAULT
RUN
RUN
PLC-1
PLC-1
RIO-3
RIO-3
RIO-4
RIO-4
ZH ZL ZCH ZCL ZCH ZH ZL VH AI MD MN YN XA YA JI MD MN YN XA YA JI SC SC
CLI-C1 CLI-C1 CLI-C1 CLI-C1 CLD-C2 CBW-C1 CBW-C1 CBW-C1 6 CS-1 CS-1 CS-1 CS-1 CS-1 CS-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 171 Queens Avenue, 6th Floor
London ON N6A 5J7
DI DI DO DO DO DI DI DO AI DO DI DI DI DI AI DO DI DI DI DI AI AI AO Tel: 519.645.2007
www.stantec.com
OP CL OP OP NTU ST SP A/M ST SP SP M A ST SP
Copyright Reserved
UIR-5
HMS1 ZLH HMS2 ZLL HMS1 HMS1 ZLH ZLL AI HMS1 MLN HMS2 MLB MLF HMS1 HMS2 HMS3 SI SC HMS1 HMS2 HMS3 HMS1 MLN HMS2 MLB MLF - any errors or omissions shall be reported to Stantec without delay.
GCP
GCP
GCP
GCP
CLI-C1 CLI-C1 CLI-C1 CLI-C1 CLD-C2 CBW-C1 CBW-C1 CBW-C1 6 CS-1 CS-1 CS-1 CS-1 CS-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CS-1 CS-1 CS-1 CS-1 CS-1
Legend
SP M A RST Electrical Proposed
SCADA Proposed
MCC-1
MCC-1
MLN HMS1 HMS2 HMS3 HMS3
Electrical Removals
CS-1 CR-1 CR-1 CR-1 CR-1
SCADA Removals
Existing
5A 5A
1 2 3 6 7 AIT LR ST SP RST LR ST SP RST

6/7 Notes
MCC-1
MCC-1
HMS1 HMS2 HMS3 HMS4 YN MN XA HMS1 HMS2 HMS3 HMS4 SI SC YN MN XA
CS-1 CS-1 CS-1 CS-1 CS-1 CS-1 CS-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1 CR-1
NTU
AE AT
6 6
5A 5A
ST SP ST SP
HMS1 HMS2 WIC MLN MLF HMS1 HMS2 MLN
LCP
LCP
CS-1 CS-1 CS-1 CS-1 CS-1 CR-1 CR-1 CR-1
4 5

FROM LOW LIFT File Name: 165620209-DI602 ML/DM SSS SSS 2020.07.15
TO FILTER INLET
PUMP WELL Dwn. Dsgn. Chkd. YYYY.MM.DD
102 DI601 105 DI603

Permit/Seal
2
B ZSL ZSH ZCL ZCH

CLI-C2 CLI-C2 CLI-C2 CLI-C2
TO FILTER INLET
104 DI603
CLI-C2
Client/Project Logo
1 4 5 6
ZSL ZSH ZCL ZCH M V

ZSL ZSH ZCH
CLI-C1 CLI-C1 CLI-C1 CLI-C1 CS-1 CR-1 CLD-C2 CLD-C2 CLD-C2
FROM
BSP- 3 CHEMICAL ROOM
(POLYMER)
DI605 203
Client/Project
CLI-C1
CLD- 3
CL- 1 Town of Amherstburg
CLD- 1 CLD-C2 SCADA Upgrades
7 415 Front Rd N., Amherstburg, ON, N9V 2V5
A
ZSL ZSH ZCH FROM PLANT Title
CBW-C1 CBW-C1 CBW-C1 EFFLUENT
P&ID
DI604 111
CBW-C1
Clarifiers
Project No. Scale

165620209
2022.05.03 11:21:21 AM

of
DI-602
1 2 3 4 5
CHANNEL LEVEL
DIFFERENTIAL
FILTER INLET
CLEARWELL
INDICATION
PRESSURE
CHLORINE
COMMAND
COMMAND
COMMAND
TURBIDITY
CONTROL
POSITION
POSITION
FILTER 1
FILTER 1
FILTER 1
FILTER 1
LOSS OF
OPENED
OPENED
OPENED
OPENED
OPENED
OPENED
OPENED
CLOSED
CLOSED
CLOSED
CLOSED
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
FILTER
ECHO
LEVEL
FLOW
RIO-3/4
RIO-3/4
RIO-3/4
RIO-3/4
RIO-3/4
RIO-3/4
RIO-3/4
RIO-3/4
RIO-3/4
RIO-4
LI FI PDI AI ZH ZL VH ZH ZL VH ZH ZL VH ZH ZL ZI ZC AI LI LI
2 2 1 2 FCI-C9 FCI-C9 FCI-C9 FE-C1 FE-C1 FE-C1 FJW-C9 FJW-C9 FJW-C9 FE-C5 FE-C5 FE-C5 FE-C5 10 13 13 171 Queens Avenue, 6th Floor
London ON N6A 5J7
AI AI AI AI DI DI DO DI DI DO DI DI DO DI DI AI AO AI AI DI Tel: 519.645.2007
www.stantec.com
NTU OP CL OP CL CL2 Copyright Reserved

UIR-2
UIR-5
LI FCI PDI FI PDI AI HMS1 ZLH HMS2 ZLL HMS1 ZLH HMS2 ZLL ZLH ZLL ZLN ZLH ZLL AI - any errors or omissions shall be reported to Stantec without delay.
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
2 2 1 2 1 2 FCI-C9 FCI-C9 FCI-C9 FCI-C9 FE-C1 FE-C1 FE-C1 FE-C1 FJW-C9 FJW-C9 FE-C5 FE-C5 FE-C5 10
Legend
OP CL OP CL Electrical Proposed
SCADA Proposed
FCI-2
HMS1 ZLH HMS2 ZLL HMS1 ZLH HMS2 ZLL ZC
GCP
FCP
FCP
34A 33A 32A 31A Electrical Removals
FE-C1 FE-C1 FE-C1 FE-C1 FJW-C9 FJW-C9 FJW-C9 FJW-C9 FE-C5
SCADA Removals
35 36 Existing
19 20 37 38
31A 32A 33A 34A
21 22
AIT-4/5
AT-2/3
27 28 29 AT AT AIT AIT ZSH ZSL ZCH ZSH ZSL ZCH ZSL ZSH ZCH ZSL ZSH ZC ZI 43
2 3 4 5 FCI-C9 FCI-C9 FCI-C9 FE-C1 FE-C1 FE-C1 FJW-C9 FJW-C9 FJW-C9 FE-C5 FE-C5 FE-C5 FE-C5
45 Notes
30 44
1. Original level transmitters LT-2, LT-3, LT-4 & LT-5 for Filter 1, 2, 3 &
4 not shown (not functional).
1 2 46 3 4 5 6 11 12 13 14
23 24 25 26
39 40 41 42 15 16 17 18
7 8 9 10 FROM
CHEMICAL ROOM
31 32 33 34
(POLYMER)
DI605 202
FROM WASH WATER LINE

C
DI604 106
7
FI- C1
FILTER 1 INLET CHANNEL FROM JET
39 WASH LINE
FD-C5
DI604 108
LIT LE 11
27 44
2/3 2
45 28 F-1
FILTER LIT AIT By Appd YYYY.MM.DD
43 Revision
FJW-C9 19 31 14 10
LI TU PI
LIT LE CL2
14 23
13 13
FE FIT AE AY
PDIT AE
15 35 2 2 2 2
3 LE 10 C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
LE 1
13 14 B For Review ML/DM SSS 2021.12.03
BSP- 6 A For Review ML/DM SSS 2021.09.20
M By YYYY.MM.DD
FMW-C1 Issued Appd
FE-C1 8 FM- 2 FE-C5
FI- C2 File Name: 165620209-DI603 ML/DM SSS SSS 2020.07.15
FILTER 2 INLET CHANNEL Dwn. Dsgn. Chkd. YYYY.MM.DD
40
FD-C6
CL2
Permit/Seal
LE AIT
12
FROM CLARIFIER 3 9
1
EFFLUENT
F-2
B 20 32
104 DI602 FILTER FJW-C10
TU
FCI-C9 24
FILTER INLET FE FIT AE AY
FROM CLARIFIER 2 CHANNEL PDIT 3 3
16 4 36 3 3
BY-PASS 2
BSP- 7
105 DI602
M
CLB-C5 FMW-C2 FE-C2 FM- 3 FE-C6
9 Client/Project Logo
FI- C3
FILTER 3 INLET CHANNEL
41
FD-C7
FILTER
LIT LE 13 CLEARWELL
29
4/5 4
30 BSP- 4
F-3 21 33
FJW-C11
FILTER TU
25
Client/Project
FE FIT AE AY
PDIT 4 4
17 5
3
37 4 4 The Coorporation of the
BSP- 8 TO RESERVOIR Town of Amherstburg
M
110 DI604 Amherstburg WTP Electrical &
FMW-C3 FE-C3 FE-C7
FM- 4
FI- C4
10 SCADA Upgrades
FILTER 4 INLET CHANNEL 415 Front Rd N., Amherstburg, ON, N9V 2V5
42 TO RESERVOIR
A FD-C8 34
113 DI604
Title
LE 14
AY
5
5
P&ID
FJW-C12 22 TU Filters
F-4
FILTER AE 26
FE FIT 5
PDIT 5 5
Project No. Scale
18 6 38
4 BSP- 9 165620209
2022.05.03 11:21:32 AM
46 FE-C4 FM- 5 FE-C8

M Revision Sheet Drawing No.
FMW-C4

CLB-C5?
of
DI-603
1 2 3 4 5
WASH WATER
REFERENCE
REFERENCE
INDICATION
INDICATION
INDICATION
INDICATION
INDICATION
INDICATION
RESERVOIR
PRESSURE
PRESSURE
CHLORINE
CHLORINE
COMMAND
COMMAND
COMMAND
COMMAND
TURBIDITY
EFFLUENT
EFFLUENT
EFFLUENT
EFFLUENT
CONTROL
POSITION
POSITION
RUNNING
RUNNING
OPENED
OPENED
CLOSED
CLOSED
REMOTE
REMOTE
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
POWER
POWER
MOTOR
MOTOR
CLOSE
SPEED
SPEED
SPEED
SPEED
COMM
COMM
PLANT
PLANT
PLANT
PLANT
FAULT
FAULT
FAULT
FAULT
OPEN
FLOW
FLOW
RUN
RUN
PLC-1
PLC-1
RIO-3
RIO-3
RIO-4
RIO-2
RIO-1
RIO-1
RIO-1
RIO-2
RIO-2
FI ZH ZL ZI ZC PI ZH ZL VH VL MD MN YN XA YA JI SC SC MD MN YN XA YA JI SC SC AI AI AI FI PI
6 FMW-C14 FMW-C14 FMW-C14 FMW-C14 6 HLS-C4 HLS-C4 HLS-C4 HLS-C4 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 7 12 11 9 8 171 Queens Avenue, 6th Floor
London ON N6A 5J7
AI DI DI AI AO AI DI DI AI AO DO DI DI DI DI AI AI AO DO DI DI DI DI AI AI AO AI AI AI AI AI Tel: 519.645.2007
www.stantec.com
ST SP ST SP TU CL2 CL2 Copyright Reserved

UIR-4
UIR-4
UIR-1
UIR-5
UIR-5
ZLN ZLH ZLL PI ZLH ZLL ZLN ZLH ZC HMS1 MLN HMS2 MLB MLF HMS1 MLN HMS2 MLB MLF AI AI AI FI PI - any errors or omissions shall be reported to Stantec without delay.
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
GCP
FMW-C14 FMW-C14 FMW-C14 6 WWD-6 WWD-6 HLS-C4 HLS-C4 HLS-C4 HL-1 HL-1 HL-1 HL-1 HL-1 WW-6 WW-6 WW-6 WW-6 WW-6 7 12 11 9 8
Legend
LR ST SP RST Electrical Proposed
SCADA Proposed
MCC-1
MCP-5
FI ZLN ZLH ZLL ZC HMS1 HMS2 HMS3 HMS4 SC SI YN MN XA MLN
FCP
FCP
Electrical Removals
FM-6 FMW-C14 FMW-C14 FMW-C14 FMW-C14 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 HL-1 WW-6
SCADA Removals
Existing
11
27
LR ST SP RST
MCP-9
1 2 3 4 5 6 7 8 9 10 23 14 13 12 AIT HMS1 HMS2 HMS3 HMS4 SC SI YN MN XA AIT 27 25 26
11 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 WW-6 12 Notes
15 16 17 18 PI
CL2 CL2
19 20 21 22 NTU
AE AE
AE AY AIT
24 11 11 12
7 7 6/7
PI
SERVICE SERVICE
WATER WATER
DI601 112 112 DI605
TO CLARIFIER
C BACKWASH WATER
DI602 111
25
2
4 FIT FE
6 9 9 24
FIT/PDE
ZSH ZSL ZC ZI
7
PT FJW-C13 FJW-C13 FJW-C13 FJW-C13
M
TO FILTER 7
FM- 9 HLS- 6
JET WATER
FE- 7
DI603 108
FJW-C13
HLW- 1
21 FIT
HLW- 3
3 8 23 C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29
20 B For Review ML/DM SSS 2021.12.03
5 A For Review ML/DM SSS 2021.09.20
1 8 22 TO DISTRIBUTION/
ZSH ZSL ZC ZI WATER TOWER Issued By Appd YYYY.MM.DD
PT FMW-C14 FMW-C14 FMW-C14 FMW-C14 FM- 8

FE FIT
6 114 DI607 File Name: 165620209-DI604 ML/DM SSS SSS 2020.07.15
TO FILTER 6 6
AR- 3 HLDC- 3 HLD- 3 HLS- 2 HLS- C4 Dwn. Dsgn. Chkd. YYYY.MM.DD
WASH WATER
DI603 106 M
Permit/Seal
FMW-C14 FE- 6
PIT
WWD- 6
8
7 9
B BSP- 5
26
AR- 2 HLDC- 2 HLD- 2
12 11 13 14
WWDC- 6
V V V V
HL- 3 WW- 6 HL- 2 HL- 1
Client/Project Logo
AR- 6
10
AR- 1 HLDC- 1 HLD- 1
Client/Project

Town of Amherstburg
HIGH LIFT HIGH LIFT
CLEAR WELL 2 17 CLEAR WELL 1 Amherstburg WTP Electrical &
R- 10 SCADA Upgrades
18
16
RB- 6
A 15
FROM Title
FILTER CLEARWELL CWI- 5 19
P&ID
110 DI603 R- 8
R- 9
RESERVOIR High Lift Pumping
FROM
FILTER CLEARWELL
Project No. Scale
113 DI603 165620209
2022.05.03 11:21:41 AM
POST CHLORINE Revision Sheet Drawing No.

205

DI606 of
DI-604
1 2 3 4 5
ALUM TANK 1
ALUM TANK 2
REFERENCE
REFERENCE
REFERENCE
INDICATION
INDICATION
INDICATION
COMMAND
COMMAND
COMMAND
RUNNING
RUNNING
RUNNING
REMOTE
REMOTE
REMOTE
STATUS
STATUS
STATUS
STATUS
STATUS
STATUS
COMM
COMM
COMM
FAULT
FAULT
FAULT
LEVEL
LEVEL
FLOW
FLOW
FLOW
FLOW
FLOW
FLOW
RUN
RUN
RUN
PLC-1
PLC-1
PLC-1
PLC-1
PLC-1
MD MN YN YA FI FC MD MN YN YA FI FC MD MN YN YA FI FC LI LI Stantec Consulting Ltd.
CMP-1 CMP-1 CMP-1 CMP-1 CMP-1 CMP-1 CMP-3 CMP-3 CMP-3 CMP-3 CMP-3 CMP-3 CMP-5 CMP-5 CMP-5 CMP-5 CMP-5 CMP-5 6 7 171 Queens Avenue, 6th Floor
London ON N6A 5J7
DO DI DI DI AI AO DO DI DI DI AI AO DO DI DI DI AI AO AI AI Tel: 519.645.2007
www.stantec.com
EtherNet/IP EtherNet/IP EtherNet/IP
Copyright Reserved
Legend
Electrical Proposed
SCADA Proposed
MLN MLN MLN MLN
GCP
GCP
GCP
Electrical Removals
CMP-1/2 CMP-3/4 CMP-5 CMP-6
SCADA Removals
Existing
Notes
1. Polymer pump VFDs in control panel, common for pair, to be
replaced with singe wall mount VFD per pump, EtherNet/IP
control.
2. Alum pump VFDs in control panel to be replaced with new
wall mount VFD, EtherNet/IP control.
LIT LIT
6 7
CHEMICAL FEED ROOM
1 1
C AM ST SP AM ST SP
CMP-1/VFD
CMP-3/VFD
LE LE
HMS HMS HMS MN HMS HMS HMS MN 6 7
CMP-1 CMP-1 CMP-1 CMP-1 CMP-3 CMP-3 CMP-3 CMP-3
FI FC YN FI FC YN ALUM ALUM
CMP-1 CMP-1 CMP-1 CMP-3 CMP-3 CMP-3 STORAGE STORAGE
1 2 3 4 TANK 1 TANK 2
SERVICE
WATER CST- 3? CST- 4
112 DI604

M
ALUM STORAGE ROOM B For Review ML/DM SSS 2021.12.03
SERVICE A For Review ML/DM SSS 2021.09.20
WATER By YYYY.MM.DD
Issued Appd
112 DI606
File Name: 165620209-DI605 ML/DM SSS SSS 2020.07.15
PMX- 1
Permit/Seal
LIT
8 CLARIFIER FILTER
POLYMER P1/O/P2 POLYMER P1/O/P2
TANK TANK
B HS1 HS1
CP
CP
CMP-1/2 CMP-3/4
CST- 1 CST- 2
1 1 2 2
2 3 AM ST SP AM ST SP
AM ST SP AM ST SP
CMP-5/VFD
VFD/CP
VFD/CP
VFD/CP
HMS HMS HMS HMS HMS HMS HMS HMS HMS MN HMS HMS HMS
CMP-1/2CMP-1/2CMP-1/2 CMP-3/4CMP-3/4CMP-3/4 CMP-5 CMP-5 CMP-5 CMP-5 CMP-5 CMP-5 CMP-5
FI FC FI FC FI FC YN FI FC
CMP-1/2CMP-1/2 CMP-3/4CMP-3/4 CMP-5 CMP-5 CMP-5 CMP-5 CMP-5 Client/Project Logo
1 4 5 6 5 6
1 2 3 4 5 6
Client/Project

Town of Amherstburg
CMP- 1 CMP- 2 CMP- 3 CMP- 4 CMP- 5 CMP- 6 SCADA Upgrades
A
TO CLARIFIER Title
DI602 203
P&ID
TO FILTERS Alum & Polymer
DI603 202
TO COMPRESSOR ROOM
Project No. Scale
DI601 201 165620209
2022.05.03 11:21:51 AM

of
DI-605
1 2 3 4 5

London ON N6A 5J7
Tel: 519.645.2007
www.stantec.com
Copyright Reserved
FI FI - any errors or omissions shall be reported to Stantec without delay.
GCP
GCP
CHL-1 CHL-2
Legend
Electrical Proposed
SCADA Proposed
Electrical Removals
SCADA Removals
Existing
2 4
Notes
LOW LIFT
204 DI601
POST CHLORINE
205 DI604
PRE CHLORINE A For Review ML/DM SSS 2021.09.20
206 DI601 Issued By Appd YYYY.MM.DD

CHLORINE CHLORINE
TANK 1 TANK 2 File Name: 165620209-DI606 ML/DM SSS SSS 2020.07.15
CST- 5 CST- 6
Permit/Seal
Client/Project Logo
1
AUTO PRE/OFF/POST FI FI FI
CHL-2 CHL-3 CHL-4
FIC HS
2 3 4
CHL-1 CHL-1
MAN AUTO MAN AUTO MAN AUTO
Client/Project
AIT MAN FC FIC FC FIC FC FIC

13 CHL-2 CHL-2 CHL-3 CHL-3 CHL-4 CHL-4 The Coorporation of the
FI FC
CHL-1 CHL-1 Town of Amherstburg
PRE/OFF/POST PRE/OFF/POST PRE/OFF/POST
AE PI HS HS HS
13 CHL-1 CHL-2 CHL-3 CHL-4 SCADA Upgrades
CHLORINE GAS MONITOR CLORINATOR 1 (LOW LIFT CL2) CLORINATOR 2 (PRE CL2) CLORINATOR 3 (STAND-BY) CLORINATOR 4 (POST CL2) 415 Front Rd N., Amherstburg, ON, N9V 2V5
A
Title
P&ID
SERVICE
WATER Chlorine
112 DI605
Project No. Scale

165620209
2022.05.03 11:22:00 AM

of
DI-606

AWTP SCADA and Electrical Drawings IFT

Uploaded by

Copyright:

Available Formats

AWTP SCADA and Electrical Drawings IFT

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AWTP SCADA and Electrical Drawings IFT

Uploaded by

Copyright:

Available Formats

Amherstburg WTP, 415 Front Rd N.

, Amherstburg, ON, N9V 2V5

Drawing Index Drawing Index

Amherstburg WTP E-116

Electrical & SCADA Upgrades

Tender E08-2020-040 EI-521

EI-622 SCADA Control Panel Typical PLC Card Wiring

April 29th, 2022 EI-631

PROJECT NUMBER: 165620209

MCP Automatic harmonic filter Control relay (CR)

Emergency/exit lighting normally open contact Tripping relay

Field Control Wiring Transformer

Disconnect terminal block

Feed-through terminal block

ORIGINAL SHEET - ANSI D

Stantec Consulting Ltd.

hydro's final connections.

prior to hydro making all final connections.

Hydro One Scope of Work

2. Hydro One is to install and/or supply the following, after

Revision By Appd YYYY.MM.DD

2.2. New dip pole WL-1 and ground at the pole

B For Review ML/DM SSS 2021.12.03

A For Review ML/DM SSS 2021.09.20

File Name: 165620209-E101 ML/DM SSS SSS 2020.07.15

1.8 SYSTEM been decommissioned. Remove the following:

structure, transformer, transformer concrete pad, electrical

returned to hydro one.

EXISTING OVERHEAD SCADA Upgrades

Project No. Scale

A SUBSTATION ELEVATION B PRIMARY SERVICE ELEVATION

ORIGINAL SHEET - ANSI D

Undistributed native material

Finished Grade Finished Grade Stantec Consulting Ltd.

Revision By Appd YYYY.MM.DD

C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29

Issued By Appd YYYY.MM.DD

File Name: 165620209-E102 ML/DM SSS SSS 2020.07.15

HYDRO ONE PARTIAL 750KVA TRANSFORMER VAULT TRANSFORMER GROUNDING

Project No. Scale

Revision Sheet Drawing No.

ORIGINAL SHEET - ANSI D

Stantec Consulting Ltd.

FE/PDT-8 Copyright Reserved

T UH-5 3 Existing Equipment

Revision By Appd YYYY.MM.DD

C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29

File Name: 165620209-ED111 ML/DM SSS SSS 2020.07.15

LL-1 Client/Project Logo

SCREEN WELL Notes

ORIGINAL SHEET - ANSI D

Existing 2 LP-C HLDC-2

C Issued for Tender E08-2020-040 ML/DM SSS 2022.04.29

HIGH LIFT VFDs LOW LIFT VFDs

ORIGINAL SHEET - ANSI D

Stantec Consulting Ltd.

2 FMW-C3 (at riser) FMW-C4 (at riser) 2

Existing cable tray

PDIT-1 PDIT-2 PI-6 PI-7 PDIT-3 PDIT-4

FD-C6 (at riser) 2 FD-C8 (at riser) 2