Data Sheet

28 Port Gigabit Ethernet PoE+ Switch

with Fiber Uplinks

Overview

The 28 Port Gigabit Ethernet PoE+ Switch with 4 Fiber uplink ports is the next generation
Layer 2 Power-over-Ethernet (PoE) switch from MICROSENS. It provides 24 Gigabit
Ethernet ports with PoE/PoE+ capability and four dual speed (100/1000Base-X) SFP slots.
The switch can be managed via Telnet/SSH or Web-based management. Additionally,
SNMP allows to configure essential functions. Due to powerful Layer 2 features, security
functions like RADIUS authentication and high PoE capability (in total 370 W) the switch is
ideally suited for enterprise environments with several PDs (powered devices) like IP
cameras, IP phones or Wireless Access Points.

Key Features and Benefits

 Easy manageability, basic security and QoS

 Low Total Cost of Ownership (TCO) with Energy-efficient Design

 DHCP Server

 Cost-effective Ethernet Switch for Enterprise-class

 Advanced Power-over-Ethernet management and scheduling

 24 PoE/PoE+ ports according to IEEE802.3af/at

 802.3az Energy Efficient Ethernet

©2018_MICROSENS GmbH & Co. KG_Kueferstr. 16_59067 Hamm/Germany_www.microsens.com

Data Sheet_19” 28 Port Gigabit Ethernet PoE+ Switch with Fiber Uplinks Page 2/6

Specifications

Gigabit Ethernet Switch Connectors

 Gigabit Ethernet Switch Uplink
 PoE(+) PSE according to  4x SFP slots 100/1000Base-X
IEEE 802.3af/at Local Ports
 Low power consumption switch-  24x RJ-45 10/100/1000Base-T PoE+
chipset ports

 Layer-2+ store-and-forward Power Supply

 100..240 VAC 50/60 Hz, internal
 Max. 8k MAC-addresses, automatic
learning and aging Mounting
 Jumbo Frames (max. 9k Bytes)
 Mounting into 19” racks requiring 1U
Energy-Efficient Ethernet space

 EEE according to IEEE 802.3az

 Reduced power consumption for each
RJ-45 port

Network Management
 Web Manager (HTTP/HTTPS)
 Telnet/SSH incl. standard-commands
(ping etc.)
 SNMP v1/v2c/v3 with
User-based Security Model (USM)

Feature Overview

Performance
Switching capacity 56 Gbps
Forwarding rate 41.7 mpps

Layer 2 Switching
Spanning Tree Standard Spanning Tree 802.1d
Protocol (STP) Rapid Spanning Tree (RSTP) 802.1w
Multiple Spanning Tree (MSTP) 802.1s
Trunking Link Aggregation Control Protocol (LACP) IEEE 802.3ad
Static aggregation
VLAN Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
 Port-based VLAN
 802.1Q tag-based VLAN
 Protocol-based VLAN
 IP subnet-based VLAN
 MAC-based VLAN
 Q-in-Q (double tag) VLAN
 Management VLAN
 Private VLAN Edge (PVE)
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated
with appropriate levels of QoS

©2018_MICROSENS GmbH & Co. KG_Kueferstr. 16_59067 Hamm/Germany_www.microsens.com

Data Sheet_28 Port Gigabit Ethernet PoE+ Switch with Fiber Uplinks Page 3/6

Feature Overview (continued)

DHCP Relay Relay of DHCP traffic to DHCP server in different VLAN

Supports DHCP Option 82
IGMP Snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters
Supports 512 multicast groups
IGMP Proxy IGMP snooping with proxy reporting or report suppression actively filters
IGMP packets in order to reduce load on the multicast router
MLD v1/v2 Deliver IPv6 multicast packets only to the required receivers
Snooping
Multicast VLAN The switch uses a dedicated manually configured VLAN, called the
Registration (MVR) multicast VLAN, to forward multicast traffic over Layer 2 network in
conjunction with IGMP snooping

Security
Secure Shell (SSH) SSH secures Telnet traffic in or out of the switch
Protocol SSH v1 and v2 are supported
Secure Sockets SSL encrypts the http traffic, allowing advanced secure access to the
Layer (SSL) browser-based management GUI in the switch
IEEE 802.1X RADIUS authentication, authorization and accounting, MD5 hash, guest
VLAN, single/multiple host mode and single/multiple sessions
Supports IGMP-RADIUS based 802.1X
Dynamic VLAN assignment
Layer 2 Isolation PVE (also known as protected ports) provides L2 isolation between clients
Private VLAN Edge in the same VLAN, supports multiple uplinks
(PVE)
Port Security Locks MAC addresses to ports and limits the number of learned MAC
addresses
IP Source Guard Prevents datagrams with spoofed addresses from being send over the
network
RADIUS/ TACACS+ Supports RADIUS and TACACS+ authentication. Switch operates as a
client.
ARP Inspection ARP inspection is a security feature that validates ARP packets in a
network. ARP inspection determines the validity of packets by performing
stored in a trusted database.
Storm Control Prevents traffic on a LAN from being disrupted by a broadcast, multicast,
or unicast storm on a port
DHCP Snooping DHCP snooping provides security by filtering un-trusted DHCP messages
and by building and maintaining a DHCP snooping binding table
ACLs Supports up to 384 entries
Drop or rate limitation based on source and destination MAC, VLAN ID,
IP address, protocol, port, differentiated services code point (DSCP) / IP
precedence, TCP/ UDP source and destination ports, 802.1p priority,
Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP
packets, TCP flag

©2018_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com

Data Sheet_28 Port Gigabit Ethernet PoE+ Switch with Fiber Uplinks Page 4/6

Feature Overview (continued)

Quality of Service
Hardware Priority Supports 8 hardware queues
Queue
Scheduling Strict priority and weighted round-robin (WRR)
Queue assignment based on DSCP and class of service (802.1p/ CoS)
Classification Port-based
802.1p VLAN priority based
Rate Limiting Ingress policer
Egress shaping and rate control per port

Management
Web GUI Interface Built-in switch configuration utility for browser-based device configuration
(HTTP/ HTTPs)
Dual Image Dual image provides independent primary and secondary images for
backup while upgrading
DHCP Server Supports DHCP server to assign IP to DHCP clients
SNMP Management of essential functions and parameters like IP settings, VLAN,
PoE, LACP or QoS through SNMP:
- version1, 2c and 3 with support for traps,
- version 3 user-based security model (USM)
NTP Network Time Protocol (NTP) is a networking protocol for clock
synchronization between computer systems over packet-switched
networks
Remote Monitoring Embedded RMON software agent supports RMON groups 1,2,3,9 (history,
(RMON) statistics, alarms, and events) for enhanced traffic management,
monitoring and analysis
Firmware Upgrade Web browser upgrade (HTTP/ HTTPs) and TFTP
Port Mirroring Traffic on a port can be mirrored to another port for analysis with a
network analyzer or RMON probe. Up to N-1(N is number of switch’s
ports) ports can be mirrored to single destination port. A single session is
supported.
Other Management  HTTP/HTTPs
 SSH
 RADIUS
 DHCP Client
 SNTP
 Cable diagnostics
 Ping test
 Syslog
 Telnet client
 IPv6 management

©2018_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com

Data Sheet_28 Port Gigabit Ethernet PoE+ Switch with Fiber Uplinks Page 5/6

Feature Overview (continued)

Green Ethernet
Energy Detect Compliant IEEE802.3az Energy Efficient Ethernet Task Force.
Automatically turns off power on Gigabit Ethernet RJ-45 port when
detecting link down or Idle of client. Active mode is resumed without loss
of any packets when the switch detects the link up.
Cable Length Adjusts the signal strength based on the cable length
Detection Reduces the power consumption for shorter cables

General
Jumbo Frames Frame sizes up to 9216 bytes
MAC Table Up to 8K MAC addresses

Discovery
Link Layer Used by network devices for advertising their identity, capabilities, and
Discovery Protocol neighbours on an IEEE 802ab local area network, principally wired Ethernet
(LLDP) Supports LLDP-MED extensions
(IEEE802.1AB) with
LLDP-MED
Extensions

Power-over-Ethernet
Port Configuration Supports per port PoE configuration
PoE Scheduling Supports per port PoE scheduling to turn on/off the PoE devices (PDs)
Auto-checking Check the link status of PDs; reboot PDs if there is no response
Power Delay The switch provides power to the PDs based on delay time when PoE
switch boots up, in order to protect switch from misuse of the PDs

Technical Specifications

Type 28 Port Gigabit Ethernet PoE+ Switch with 4x Fiber Uplinks

Device Interfaces 24x10/100/1000Base-T PoE(+) ports with RJ-45 connectors

4x100/1000Base-X SFP slots
Available PoE Power 370 W (max.)
Each of port 1 - 24 supports PoE (15.4 W) or PoE+ (30 W) within
available PoE power.
Power Supply 100..240 VAC, 50/60 Hz
Power Consumption 32 W (typ., without PoE, GBE links at all ports, 4x SFPs inserted)
426 W (typ., with PoE , GBE links at all ports, 4x SFPs inserted)
Operating Temperature 0…+50 °C
Storage Temperature -20…+70 °C
Operating Humidity 10…90 % (relative, non-condensing)
Altitude < 3000 m
Dimensions (W x H x D) 442 x 44 x 211.2 mm
Weight < 3 Kg
EMC CE mark
Safety CE mark

©2018_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com

Data Sheet_28 Port Gigabit Ethernet PoE+ Switch with Fiber Uplinks Page 6/6

Order Information

Description Article No.:

28 Port Gigabit Ethernet PoE+ Switch with 4 Fiber Uplinks

28 Port Gigabit Ethernet PoE+ Switch, 24x10/100/1000Base-T

PoE+ ports, 4x100/1000Base-X SFP slots, smart management, 19" MS400834M
1U, internal 230 VAC power supply

Accessories
Description Article No.:

SFP 1G Transceiver (Fast Ethernet & WDM on request)

SFP Transceiver, Gigabit Ethernet, Digital Diagnostic

MS100200D
850 nm Multimode, 1000Base-SX, LC duplex

SFP Transceiver, Gigabit Ethernet, Digital Diagnostic

MS100210D
1310 nm single mode, 1000Base-LX, LC duplex

This document in whole or in part may not be duplicated, reproduced, stored or retransmitted without prior written permission of MICROSENS GmbH
& Co. KG. All information in this document is provided ‘as is’ and subject to change without notice. MICROSENS GmbH & Co. KG disclaims any
liability for the correctness, completeness or quality of the information provided, fitness for a particular purpose or consecutive damage.
MICROSENS is a trademark of MICROSENS GmbH & Co. KG. Any product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies. 180117 sh/wf MS400834_19i_28xGBE_4xFiberUplnk_DAT_EN_v1.0.2_2017-08-22.docx

©2018_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com