MECATREDZ TECHNOLOGY LTD.

(LUCKNOW)

(SESSION 2022-2023)

DEPARTMENT OF INFORMETION TECHNOLOGY

SUMMER TRAINING REPORT

Submitted in Partial Fulfillment of requirements for the Award of Degree of
Diploma of Engineering in Information Technology.

MAHAMAYA POLYTECHNIC OF INFORMRTIUON

TECHNOLOGY , (AMROHA)

Submitted To: Head of Dept: Submitted By:

Mr.Lalit Kumar Gupta Mrs. Soumya Singh Anubhav Shukla
 ACKNOWLEDGEMENT

The completion of this training work could have been possible with continued & dedicated
efforts & guidance of large number of faculty & staff members of the institute .I acknowledge
our gratitude to all of them. The acknowledgement however will be incomplete without specific
mention as follows

I wish to acknowledge my deep gratitude to Mr.Amrit Singh, teacher at CRISP for his
cooperation and guidance. I am also thankful to his Lab assistant that provided staunch support
throughout this training and helped me to complete the training successfully

Furthermore I would also like to acknowledge with much appreciation the crucial role of our
HOD Prof. Shomya singh for this encouragement & providing all the facilities in the department

Finally, I would like to say that I am indebted to my parents for everything that they have done
for me. All of this would have been impossible without their constant support. And I also thank
to God for being kind to me and driving me through this journey.

Anubhav Shukla

0132cs111116
 MECATREDZ TECHNOLOGY LTD. LUCKNOW

Department of Information Technology.

CERTIFICATE

This is to certify that the Mr. Anubhav shukla student of Mahamaya Polytechnic Of Information
Technology ,Amroha Diploma 5th semester (Information Technology), has completed his
Vocational training at M.T LTD. Lucknow from

His overall performance & behavior during the training is found to be

Satisfactory.

We wish him all success for this future endeavors

Signature
Mrs. Somya Singh , HOD

0132cs111116
0132cs111116
 CANDIDATE DECLARATION

I Anubhav Shukla, a student of Diploma in Information Technology, Mahamaya Polytechnic

0f Inforamation Technology , Amroha (UP), hereby declare that the work presented in this
dissertation “Summer Training ” is the outcome of my own work, is bonafide and correct to the
best of my knowledge and this work has been carried out taking care of Engineering Ethics. The
work presented does not infringe any patented work and has not been submitted to any other
university or anywhere else for the award of any degree or any professional diploma.

Date: Anubhav Shukla

Enroll No: E20113835600018

0132cs111116
 INDEX

PAGE NO.
S. No TOPIC NAME SIGN.

1 Company Profile 7

2 Introduction To Java 8
The Java Platform
3 9

4 Installation Of Java 10

5 Configuring Variable 11

6 Write, Compile And Run a Java Program 13

Package
7 15

8 Class And Object 16

Inheritance
9 17

10 Variable And Method 18

11 Modifiers And Import Statement 20

Interface
12 22

13 Working With Classes 24

14 IDE 27

15 History of Java 40

16 Features of Java 43

0132cs111116
 COMPANY PROFILES
Centre for Research and Industrial Staff Performanc (CRISP), Lucknow has been
established in the year 1997 as a Society under the Indo –German Technical Cooperation
agreement. Ministry of MSME, Government of India was the line ministry for this project
whereas the Department of Technical Education & Skill Development, Government of Madhya
Pradesh and German Technical Cooperation agency (GTZ) were the implementation partners. It
is headquartered in Bhopal with national & international operations dedicated to human resource
development & organizational development. These activities are targeted at Government,
Industries, Academic Institutions, Developmental Organizations as well as the Civil Society.
The organization has excellent infrastructure in terms of sophisticated laboratories in the field of
Industrial Automation, Mechatronics, Production Technology, Information & Communication
Technology (ICT), Multimedia Technology etc. CRISP is one of the most preferred service
providers in the areas of Technical Vocational Education & Training (TVET), Training
Institution Management and Entrepreneurship development.
FEATURES:-
 A nodal Centre for Department of Technical Education & Skill Development
Government of Madhya Pradesh for technical and management staff capacity building.
 More than 500 delighted clients from Industries, Central & State Government
Organizations, Academia, Developmental Organizations etc.
 A role model for German Technical Co-operation Agency (GTZ) for replicating CRISP
like successful Project in India and other countries.
 Practicing professional & management principles in our operations.
 Facilitating applications of e-Governance for State Govt. of Madhya Pradesh.
 A strong team of qualified & experienced employees (more than 150) capable of
handling technical and educational projects within India & overseas.

AREA OF SPECIALIZATIONS:-
 Manufacturing Technology (CNC Technology, CAD/CAM (Unigraphics, Pro-E, CATIA,
Solid Works & I-DEAS), AutoCAD.
 Industrial Automation (PLC, Variable Frequency Drives, Field Instrumentation, MMI,
Hydraulics, Pneumatics).
 Mechatronics: Mechanical, Electrical, Electronics, Instrumentation, IT.
 Car Mechatronics.
 Behavioral Sciences and Management (Leadership Development, Communication Skills,
Team Building etc.).
 Information Technology (Application & Software Development, Hardware &
Networking Training, Web Designing etc.).
 Vocational Education & Training (Design & development of curriculum & study
materials, Train The Trainers, Instructors Training, Trade identification survey, impact
study etc).
 Fashion, Interior & Graphic Designing
 Multimedia (3D Animation, Non-Linear video editing, show reel development.

0132cs111116
 Introduction to Java

With the invention of microprocessors, the world is scientifically developed with sophisticated
equipments, systems, and devices. Microprocessors are used in computers, televisions, and fax
machines. Even the hand-held devices such as pagers, PDAs (Personal Digital Assistant), and
cell phones make use of microprocessors. All these electronic devices are helpful because of
their communication capabilities. With the increasing capabilities and decreasing cost of
information processing and networking technologies, the network is growing rapidly for
transmitting information through electronic systems.

Internet is the network of networks between different types of computers located at

different places to transmit information. Information can reach to any place in the world quickly
at a cheaper rate through the Internet. Thus, the Internet has made the world a global village for
information exchange. The emerging infrastructure of electronic devices and interconnected
computer networks create an environment that presents new challenges to software industries.
for this emerging computing environment, Java process to be a well – suited programming
language. it is found suitable for networked environments involving a great variety of computer
and devices.

Java has many characteristics that have contributed to its popularity:

 Platform independence - Many languages are compatible with only one platform. Java
was specifically designed so that it would run on any computer, regardless if it was
running Windows, Linux, Mac, Unix or any of the other operating systems.
 Simple and easy to use - Java's creators tried to design it so code could be written
efficiently and easily.
 Multi-functional - Java can produce many applications from command-line programs to
applets to Swing windows (basically, sophisticated graphical user interfaces).

Java does have some drawbacks. Since it has automated garbage collection, it can tend to use
more memory than other similar languages. There are often implementation differences on
different platforms, which have led to Java being described as a "write once, test everywhere"
system. Lastly, since it uses an abstract "virtual machine", a generic Java program doesn't have
access to the Native API's on a system directly. None of these issues are fatal, but it can mean
that Java isn't an appropriate choice for a particular piece of software.

0132cs111116
 The Java Platform
One thing that distinguished Java from some other languages is its ability to run the same
compiled code across multiple operating systems.In other languages, the source code (code that
is written by the programmer), is compiled by a compiler into an executable file. This file is in
machine language, and is intended for a single operating system/processor combination, so the
programmer would have to re-compile the program seperately for each new operating
system/processor combination.Java is different in that it does not compile the code directly into
machine language code. Compilation creates bytecode out of the source code. Bytecode
generally looks something like this:

a7 f4 73 5a 1b 92 7d

When the code is run by the user, it is processed by something called the Java Virtual Machine
(JVM). The JVM is essentially an interpreter for the bytecode. It goes through the bytecode and
runs it. There are different versions of the JVM that are compatible with each OS and can run the
same code. There is virtually no difference for the end-user, but this makes it a lot easier for
programmers doing software development.

Java and Open Source:-

 In 2006 Sun started to make Java available under the GNU General Public License
(GPL). Oracle continues this project called OpenJDK.

Java Virtual machine :-

 The Java virtual machine (JVM) is a software implementation of a computer that
executes programs like a real machine.
 The Java virtual machine is written specifically for a specific operating system, e.g. for
Linux a special implementation is required as well as for Windows.
 Java programs are compiled by the Java compiler into bytecode. The Java virtual machine
interprets this bytecode and executes the Java program.

Java Runtime Environment vs. Java Development Kit

 A Java distribution comes typically in two flavors, the Java Runtime Environment (JRE)
and the Java Development Kit (JDK).
 The Java runtime environment (JRE) consists of the JVM and the Java class libraries and
contains the necessary functionality to start Java programs.
 The JDK contains in addition the development tools necessary to create Java programs.
The JDK consists therefore of a Java compiler, the Java virtual machine, and the Java
class libraries.

0132cs111116
 Installation of Java
 Check installation

 Java might already be installed on your machine. You can test this by opening a console
(if you are using Windows: Win+R, enter cmd and press Enter) and by typing in the
following command:
 java -version
 If Java is correctly installed, you should see some information about your Java
installation. If the command line returns the information that the program could not be
found, you have to install Java.

Installing the Java Development Kit

 Before installing the Java Development Kit (JDK), you should probably know what it is.
It is distributed by Oracle. It contains the core libraries and compiler required to develop
Java. The JDK should not be confused with the JRE (Java Runtime Environment). The
JRE is a JVM for running, as opposed to compiling, Java programs.

Downloading and Installing

 To download the JDK, go to
http://www.oracle.com/technetwork/java/javase/downloads/index.html. Click on "JDK
with NetBeans Bundle". Follow the instructions for downloading the JDK installation
file.
Windows: If you are running Windows, simply run the executable file and follow the
installation instructions.
Unix, Solaris, or Linux: For Linux and Unix, download the "jdk1 6.0" for Linux
systems. Save the downloaded file in any drive. Once you have saved the file, extract it to
a place that you can remember, by using Terminal or by double clicking on the file.
When you have finished extracting the file, copy the JDK 1.6.0 folder and paste it in the
usr/local(To paste to the usr/local directory, you have to be in root) so that every user can
use the java files. You can delete the downloaded zip file so that it doesn't take up space
on your drive.
Macintosh: The latest available JDK is automatically installed by the operating
system. Because Java for Macintosh is developed and maintained by Apple, in
coordination with Sun, the current version on the Macintosh may not be the current
version that is available

Note on Editions
 The JDK comes in three editions.

0132cs111116
  Java Standard Edition (JSE) – This version is the basic platform for Java. The course will
focus on this edition.
 Java Enterprise Edition (JEE) – This edition is mainly for developing and running
distributed multitier architecture Java applications, based largely on modular software
components running on an application server. We will not be covering this version in the
course.
 Java Micro Edition (JME) – This edition is primarily for developing programs to run on
consumer applicances, such as PDAs and cell phones.

Configuring Variables
 Before writing code, it is recommended that you set the Path variable on your system
so you can compile your code more easily.

 For Windows Users

 From the Control Panel, double click "System" (System and Maintenance in Vista)
 For Windows 7 or Vista, click on "System," "Advanced System Settings" on the left, and
then on "Environment Variables."
 For XP and 2000, click on the "Advanced" tab and click on "Environment Variables" For
NT, click on the "Environment" tab.
 Select the Path variable and click "Edit"
 Add the path to the bin directory of where Java is installed on your hard drive. It should
probably be: C:\Program Files\Java\jdk1.6.0_20\bin unless you changed it during
installation.
 Click OK

 For Linux and UNIX

 One way to set your path in Linux/Unix is to add a path export to your bash profile.
 In order to do this, first open your bash profile in a text editor. For example,
 pico ~/.bash_profile
 Then add this line:
 export PATH=$PATH:/usr/local/jdk/bin
 Note that the path to the java directory "/usr/local/jdk/bin" may be different on your
machine.
 Restart your shell.

0132cs111116
  For Macintosh
 Apple sets everything up for you. Sit back and relax.
 The only drawback is that because Apple handles development and maintenance of Java
on the Mac, there is usually a delay from the time that a new version is released by Sun
and the time that the new version is released on the Mac. Also, getting the latest version
sometimes requires an operating system upgrade.
 Oh well, you can't have everything.

Validate installation
 Switch again to the command line and run the following command.
 java -version
 The output should be similar to the following output.
 java version "1.7.0_25"
 OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1ubuntu0.13.04.2)
 OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode)

Development Process with Java

 Java source files are written as plain text documents. The programmer typically writes
Java source code in an Integrated Development Environment (IDE) for programming. An
IDE supports the programmer in the task of writing code, e.g. it provides auto-formating
of the source code, highlighting of the important keywords, etc.
 At some point the programmer (or the IDE) calls the Java compiler (javac). The Java
compiler creates the bytecode instructions. These instructions are stored in .class files
and can be executed by the Java Virtual Machine.

Garbage collector
 The JVM automatically re-collects the memory which is not referred to by other objects.
The java garbage collector checks all object references and find the objects which can be
automatically released.
 While the garbage collector releases the programmer from the need to explicitly manage
memory the programmer still need to ensure that he does not keep unneeded object
references otherwise the garbage collector cannot release the associated memory.
Keeping unneeded object references are typically called memory leaks.

0132cs111116
 Classpath
 The classpath defines where the Java compiler and Java runtime look for .class files to
load. This instructions can be used in the Java program.
 For example if you want to use an external Java library you have to add this library to
your classpath to use it in your program.

Write, compile and run a Java program

 Write source code
 The following Java program is developed under Linux using a text editor and the
command line. The process on other operating system should be similar and but is not
covered in this description.
 Select or create a new directory which will be used for your Java development. In this
description the path \home\vogella\javastarter is used. On Microsoft Windows your
might want to use c:\temp\javastarter. This path is called javadir in the following
description. Open a text editor which supports plain text, e.g. gedit under Linux or
Notepad under Windows and write the following source code.

Save
the source code in your javadir directory with the HelloWorld.java filename. The name
of a Java source file must always equals the class name (within the source code) and end
with the .java extension. In this example the filename must be HelloWorld.java
because the class is called HelloWorld.

 Compile and run your Java program

0132cs111116
  Open a shell for command line access. Switch to the javadir directory with the
command cd javadir, for example in the above example via the cd
\home\vogella\javastarter command. Use the ls command (dir under Microsoft
Windows) to verify that the source file is in the directory. Compile your Java source file
into a class file with the following command.

javac HelloWorld.java
Afterwards list again the content of the directory with the ls or dir command. The
directory contains now a file "HelloWorld.class". If you see this file you have
successfully compiled your first Java source code into bytecode.

You can now start your compiled Java program. Ensure that you are still in the jardir
directory and enter the following command to start your Java program.

java HelloWorld
The system should write "Hello World" on the command line.

Using the classpath

 You can use the classpath to run the program from another place in your directory.
 Switch to the command line, e.g. under Windows Start-> Run -> cmd. Switch to any
directory you want. Type:

java HelloWorld
 If you are not in the directory in which the compiled class is stored then the system
should result an error message Exception in thread "main"
java.lang.NoClassDefFoundError: test/TestClass
 To use the class type the following command. Replace "mydirectory" with the directory
which contains the test directory. You should again see the "HelloWorld" output.

0132cs111116
 java -classpath "mydirectory" HelloWorld

Java basic terms

 Basics: Package, Class and Object
It is important to understand the base terminology of Java in terms of packages, classes and
objects. This section gives an overview of these terms.

 Package
Java groups classes into functional packages.

Packages are typically used to group classes into logical units. For example all graphical
views of an application might be placed in the same package called
com.vogella.webapplication.views.

It is common practice to use the reverse domain name of the company as top level package.
For example the company might own the domain, vogella.com and in this example the Java
packages of this company starts with com.vogella.

Other main reason for the usage of packages is to avoid name collisions of classes. A name
collision occurs if two programmers give the same fully qualified name to a class. The fully
qualified name of a class in Java consists out of the package name followed by a dot (.) and
the class name.

Without packages, a programmer may create a Java class called Test. Another programmer
may create a class with the same name. With the usage of packages you can tell the system
which class to call. For example if the first programmer puts the Test class into package
report and the second programmer puts his class into package xmlreader you can
distinguish between these classes by using the fully qualified name, e.g. xmlreader.Test or
report.Test.

 Class
Def.: Template that describes the data and behavior associated with an instance of that
class.

In Java source code a class is defined by the class keyword and must start with a capital
letter. The body of a class is surrounded by {}.

0132cs111116
 package test;

class MyClass {

The data associated with a class is stored in variables ; the behavior associated to a class
or object is implemented with methods.

A class is contained in a Java source file with the same name as the class plus the .java
extension.

 Object
Def.: An object is an instance of a class.

The object is the real element which has data and can perform actions. Each object is
created based on the class definition.

0132cs111116
  Inheritance
A class can be derived from another class. In this case this class is called a subclass. Another
common phrase is that a class extends another class.

The class from which the subclass is derived is called a superclass.

Inheritance allows a class to inherit the behavior and data definitions of another class.

The following codes demonstrates how a class can extend another class. In Java a class can
extend a maximum of one class.

package com.vogella.javaintro.base;

class MyBaseClass {
void hello(){
System.out.println("Hello from MyBaseClass");
}
}
package com.vogella.javaintro.base;

class MyExtensionClass extends MyBaseClass {

}

 Override methods and the @override annotation

If a class extends another class it inherits the methods from its superclass. If it wants to
change these methods it can override these methods. To override a method you use the same
method signature in the source code of the subclass.

To indicate to the reader of the source code and the Java compiler that you have the intention
to override a method you can use the @override annotation.

The following code demonstrates how you can override a method from a superclass.

package com.vogella.javaintro.base;

class MyBaseClass {
void hello(){
System.out.println("Hello from MyBaseClass");
}
}
package com.vogella.javaintro.base;

class MyExtensionClass2 extends MyBaseClass {

}

Object has superclass

0132cs111116
 Every object in Java implicitly extends the Object class. The class defines the following
methods for every Java object:

 equals(o1) allows to check if the current object is equal to o1

 getClass() returns the class of the object

 hashCode() returns an identifier of the current object
 toString() Give a string representation of the current object

Variables and methods

 Variable
Variables allow the Java program to store values during the runtime of the program.

A variable can either be a primitive variable or a reference variable. A primitive variable

contains value while the reference variable contains a reference (pointer) to the object.
Hence if you compare two reference variables, you compare if both point to the same object.
To compare objects use the object1.equals(object2) method call.

 Instance variable
Instance variable is associated with an instance of the class (also called object). Access
works over these objects.

Instance variables can have any access control and can be marked final or transient. Instance
variables marked as final can not be changed after assigned to a value.

 Local variable

Local (stack) variable declarations cannot have access modifiers.

final is the only modifier available to local variables. This modifier defines that the variable
can not be changed after first assignment.

Local variables do not get default values, so they must be initialized before use.

 Methods

0132cs111116
 A method is a block of code with parameters and a return value. It can be called on the
object.

package com.vogella.javaintro.base;

public class MyMethodExample {

void tester(String s) {
System.out.println("Hello World");
}
}

Method can be declared with var-args. In this case the method declares a parameter
which accepts from zero to many arguments (syntax: type .. name;) A method can only
have one var-args parameter and this must be the last parameter in the method.

Overwrite of a superclass method: A method must be of the exact same return parameter
and the same arguments. Also the return parameter must be the same. Overload methods:
An overloaded method is a method with the same name, but different arguments. The
return type can not be used to overload a method.

 Main method
A public static method with the following signature can be used to start a Java
application. Such a method is typically called main method.

public static void main(String[] args){

 Constructor
A class contains constructors that are invoked to create objects based on the class
definition. Constructor declarations look like method declarations except that they use the
name of the class and have no return type. A class can have several constructors with
different parameters. Each class must define at least one constructor.

In the following example the constructor of the class expects a parameter.

package com.vogella.javaintro.base;

public class MyConstructorExample2 {

String s;

public MyConstructorExample2(String s) {
this.s = s;
}
}

0132cs111116
 If no explicit constructor is defined the compiler adds implicitly a constructor. If the class
is sub-classed then the constructor of the super class is always implicitly called in this
case.

In the following example the definition of the constructor without parameters (also
known as the empty constructor) is unnecessary. If not specified the compiler would
create one.

package com.vogella.javaintro.base;

public class MyConstructorExample {

// Unnecessary, would be created by the compiler if left out

public MyConstructorExample() {
}
}

The naming conversion for creating a constructor is the following: classname

(Parameter p1, ..) {} .

Every object is created based on a constructor. This constructor method is the first
statement called before anything else can be done with the object.

Modifiers
 Access modifiers
There are three access modifiers keywords available in Java. public, protected and private.
There are four access levels: public, protected, default and private. They define how the
corresponding element is visible to other components. If something is declared public, e.g.
classes or methods can be freely created or called by other Java objects. If something is
declared private, e.g. a method, it can only be accessed within the class in which it is
declared. protected and default are similar. A protected class can be accessed from the
package and sub-classes outside the package while a default class can get only accessed via
the same package. The following table describes the visibility:

Table 1. Access Level

Modifier Class Package Subclass World

Public Y Y Y Y
protected Y Y Y N

0132cs111116
 Modifier Class Package Subclass World
no
Y Y N N
modifier
Private Y N N N

Other modifiers
 final methods: cannot be overwritten in a subclass
 abstract method: no method body
 synchronized method: threat safe, can be final and have any access control
 native methods: platform dependent code, apply only to methods
 strictfp: class or method

Import statements
 Usage of import statements
In Java you have to access a class always via its full-qualified name, e.g. the package
name and the class name. You can add import statements for classes or packages into
your class file, which allow you to use the related classes in your code without the
package qualifier.

 Static imports
Static import is a feature that allows members (fields and methods) which are defined in a
class with the public static access modifier to be used in Java code without specifying
the class in which the member is defined. The feature provides a typesafe mechanism to
include constants into code without having to reference the class that originally defined the
field.

More Java language constructs

0132cs111116
  Interface
Interfaces are contracts for what a class can do but they say nothing about the way in
which the class must do it. An interface is a type similar to a class. Like a class an
interface defines methods. An interface can have only abstract methods, no concrete
methods are allowed. Methods defined in interfaces are by default public and abstract –
explicit declaration of these modifiers is optional. Interfaces can have constants which are
always implicitly public, static and final. A class can implement an interface. In this case
it must provide concrete implementations of the interface methods. If you override a
method defined by an interface you can also use the @override annotation. The
following code shows an example implementation of an interface and its usage within a
class.

package com.vogella.javaintro.base;

public interface MyDefinition {

// constant definition
String URL="http://www.vogella.com";

// define several method stubs

void test();
void write(String s);
}
package com.vogella.javaintro.base;

public class MyClassImplementation implements MyDefinition {

@Override
public void test() {
// TODO Auto-generated method stub

@Override
public void write(String s) {
// TODO Auto-generated method stub

}
Class methods and class variables
Class methods and class variables are associated with the class and not an instance of the
class, i.e. objects. To refer to these element you can use the classname and a dot (".")
followed by the class method or class variable name. Class methods and class variables
are declared with the static keyword. Class methods are also called static methods and
class variables are also called static variables or static fields.

An example for the usage of a static field is println of the following statement:
System.out.println("Hello World"). out is a static field, an object of type

0132cs111116
 PrintStream, and you call the println() method on this object. If you define a static
variable the Java runtime environment associates one class variable for a class no matter
how many instances (objects) exists. The static variable can therefore be seen as a global
variable. The following code demonstrates the usage of static fields.

package com.vogella.javaintro.base;

public class MyStaticExample {

static String PLACEHOLDER = "TEST";

static void test() {

System.out.println("Hello");
}
}
package com.vogella.javaintro.base;

public class Tester {

public static void main(String[] args) {

System.out.println(MyStaticExample.PLACEHOLDER);
MyStaticExample.test();
}

If a variable should be defined as constant, you declare it with the static and the final
keyword. The static method runs without any instance of the class, it cannot directly
access non-static variables or methods.

 Abstract class and methods

A class and method can be declared as abstract. An abstract class can not be directly
instantiated. If a class has at least one method which only contain the declaration of the
method but not the implementation then this class is abstract and can not be
instantiated. Sub-classes need then to define the methods except if they are also declared
as abstract. If a class contains an abstract method it also needs to get defined with the
keyword abstract. The following example shows an abstract class.

package com.vogella.javaintro.base;

public abstract class MyAbstractClass {

abstract double returnDouble();
}

Working With Classes

0132cs111116
 Table 2

What to do How to do it
package test;

Create a new class called MyNewClass. public class MyNewClass {

}
package test;
Create a new attribute (instance variable)
called var1 of type String in the MyNewClass public class MyNewClass {
class private String var1;
}
package test;

public class MyNewClass {

private String var1;
Create a Constructor for your MyNewClass
class which has a String parameter and assigns public MyNewClass(String
the value of it to the var1 instance variable. para1) {
var1 = para1;
// or this.var1= para1;
}
}
package test;

public class MyNewClass {

private String var1;

public MyNewClass(String
para1) {
Create a new method called doSomeThing in var1 = para1;
your class which does not return a value and // or this.var1= para1;
has no parameters }

public void doSomeThing()

{

}
package test;

public class MyNewClass {

private String var1;
Create a new method called doSomeThing2 in
public MyNewClass(String
your class which does not return a value and para1) {
has two parameters, a int and a Person var1 = para1;
// or this.var1= para1;
}

public void doSomeThing()

0132cs111116
 What to do How to do it
{

public void
doSomeThing2(int a, Person
person) {

}
package test;

public class MyNewClass {

private String var1;

public MyNewClass(String
para1) {
var1 = para1;
// or this.var1= para1;
}

public void doSomeThing()

{
Create a new method called doSomeThing2 in
}
your class which returns an int value and has
three parameters, two Strings and a Person public void
doSomeThing2(int a, Person
person) {

public int
doSomeThing3(String a,
String b, Person person) {
return 5; // Any value
will do for this example
}

}
package test;

public class MyOtherClass {

String myvalue;
Create a class called MyOtherClass with two Dog dog;
instance variables. One will store a String, the
public String
other will store a Dog. Create getter and setter getMyvalue() {
for these variables. return myvalue;
}

public void
setMyvalue(String myvalue)

0132cs111116
 What to do How to do it
{
this.myvalue = myvalue;
}

public Dog getDog() {

return dog;
}

public void setDog(Dog

dog) {
this.dog = dog;
}
}

Working With Local Variable

Table 3:

What to do How to do it
Declare a (local) variable of type string. String variable1;
Declare a (local) variable of type string and assign
String variable2 = "Test";
"Test" to it.
Declare a (local) variable of type Person Person person;
Declare a (local) variable of type Person, create a
Person person = new Person();
new Object and assign the variable to this object.
Declare a array of type String String array[];
Declare a array of type Person and create an array
Person array[]= new Person[5];
for this variable which can hold 5 Persons.
Assign 5 to the int variable var1 (which wasalready
var1 = 5;
declared);
Assign the existing variable pers2 to the exiting
pers1 = pers2;
variable pers1;
Declare a ArrayList variable which can hold
ArrayList<Person> persons;
objects of type Person
Create a new ArrayList with objects of type
persons = new
Person and assign it to the existing variable
ArrayList<Person>();
persons
Declare a ArrayList variable which can hold ArrayList<Person> persons =
objects of type Person and create a new Object for new ArrayList<Person>();

0132cs111116
 What to do How to do it
it.

Integrated Development Environment

The previous chapter explained how to create and compile a Java program on the
command line. A Java Integrated Development Environment (IDE) provides lots of ease
of use functionality for creating java programs. There are other very powerful IDE's
available, for example the Eclipse IDE. . For an introduction on how to use the Eclipse
IDE please see Eclipse IDE Tutorial. The remaining description uses the phrase: Create a
Java project called... ". This refers to creating a Java project in Eclipse. If you are using a
different IDE please follow the required steps in this IDE. Exercises - Creating Java
objects and methods Create a Person class and instantiate it Create a new Java project
called com.vogella.javastarter.exercises1 and a package with the same name. Create a
class called Person. Add three instance variables to it, one for storing the first name of the
person, on for storing the last name and one for storing the age of the Person. Use the
constructor of the Person object to set the values to some default value. Write a public
method called writeName() which uses the System.out.println( method to print the first
name of the person to the console. Create a new class called Main with a public static
void main(String[] args). In this method create an instance of the Person class.

 Use constructor
Add a constructor to your Person class which takes the first name, last name and the age
as parameter. Assign the values to your instance variables. Create in your main method
two objects of type Person and call the writeName method on it.

 Define getter and setter methods

Define methods which allow you to read the values of the instance variables and to set them.
These methods are called setter and getter. Getters should start with get followed by the
variable name whereby the first letter of the variable is capitized. Setter should start with set
followed by the variable name whereby the first letter of the variable is capitized. ` For
example the variable called firstName would have the getFirstName() getter method and the
setFirstName(String s) setter method. Change your main method so that you create one
person object and use the setter method to change the last name.

 Create an Address object

0132cs111116
 Create a new object called Address. The Address should allow you to store the address of a
person. Add a new instance variable of this type in the Person object. Also create a getter
and setter for the Address object in the Person object.

Solution - Creating Java objects and methods

Create a Person class and instantiate it

The following is a potential solution for Section 11.1, “Create a Person class and instantiate
it”.

package exercises.exercise04;

class Person {

String firstname = "Jim";

String lastname = "Knopf";

int age = 12;

voi d writeName() {

// Writes the firstname

System.out.println(firstname);

// Alternatively you can combine strings with +

System.out.println(firstname + " " + lastname + "" + age);

package exercises.exercise04;

0132cs111116
 public class Main {

public static void main(String[] args) {

Person person = new Person();

person.writeName();

Use constructor
package com.vogella.javastarter.exercises1;

class Person {

String firstName;

String lastName;

int age;

public Person(String a, String b, int value) {

firstName = a;

lastName = b;

age=value;

void writeName() {

// Writes the firstname

0132cs111116
 System.out.println(firstName);

// Alternatively you can combine strings with +

System.out.println(firstName + " " + lastName + "" + age);

package com.vogella.javastarter.exercises1;

public class Main {

void main(String[] args) {

Person person = new Person("Jim", "Knopf" , 12);

person.writeName();

// Reuse the same variable and assign new object to it

person = new Person("Henry", "Ford", 104);

person.writeName();

Define getter and setter methods

package com.vogella.javastarter.exercises1;

0132cs111116
 class Person {

String firstName;

String lastName;

int age;

public Person(String a, String b, int value) {

firstName = a;

lastName = b;

age = value;

public String getFirstName() {

return firstName;

public void setFirstName(String firstName) {

this.firstName = firstName;

public String getLastName() {

return lastName;

0132cs111116
 public void setLastName(String lastName) {

this.lastName = lastName;

public int getAge() {

return age;

public void setAge(int age) {

this.age = age;

void writeName() {

// Writes the firstname

System.out.println(firstName);

// Alternatively you can combine strings with +

System.out.println(firstName + " " + lastName + "" + age);

package com.vogella.javastarter.exercises1;

0132cs111116
 public class Main {

public static void main(String[] args) {

Person person = new Person("Jim", "Knopf", 21);

Person person2 = new Person("Jill", "Sanders", 20);

// Jill get married to Jim

person2.setLastName("K nopf");

person2.writeName();

Create an Address object

package com.vogella.javastarter.exercises1;

public class Address {

private String street;

private String number;

private String postalCode;

private String city;

private string country;

public String getStreet() {

return street;

0132cs111116
 }

public void setStreet(String street) {

this.street = street;

public String getNumber() {

return number;

public void setNumber(String number) {

this.number = number;

public String getPostalCode() {

return postalCode;

PostalCode(String postalCode) {

this.postalCode = postalCode;

public String getCity() {

0132cs111116
 return city;

public void setCity(String city) {

this.city = city;

public String getCountry() {

return country;

public void setCountry(String country) {

this.country = country;

public String toString() {

return street + " " + number + " " + postalCode + " " + city + " "

+ country;

package com.vogella.javastarter.exercises1;

0132cs111116
 class Person {

String firstName;

String lastName;

int age;

private Address address;

public Person(String a, String b, int value) {

firstName = a;

lastName = b;

age=value;

public String getFirstName() {

return firstName;

public void setFirstName(String firstName) {

this.firstName = firstName;

public String getLastName() {

return lastName;

0132cs111116
 }

public void setLastName(String lastName) {

this.lastName = lastName;

public int getAge() {

return age;

public void setAge(int age) {

this.age = age;

public Address getAddress() {

return address;

public void setAddress(Address address) {

this.address = address;

0132cs111116
 void writeName() {

// Writes the firstname

System.out.println(firstName);

// Alternatively you can combine strings with +

System.out.println(firstName + " " + lastName + "" + age);

package com.vogella.javastarter.exercises1;

public class Main {

public static void main(String[] args) {

// I create a person

Person pers = new Person("Jim", "Knopf", 31);

// I set the age of the person to 32

// Just for testing I write this to the console

System.out.println(pers.toString());

/*

* Actually System.out.println calls always toString, if you do not

0132cs111116
 * specify it so you could also have written System.out.println(pers);

*/

// I create an address

Address address = new Address();

// I set the values for the address

address.setCity("Heidelberg");

address.setCountry("Germany");

address.setNumber("104");

address.setPostalCode("69214");

address.setStreet("Musterstr.");

address = null;

// person is moving to the next house in the same street

pers.getAddress().setNumber("105");

0132cs111116
 HISTORYOF JAVA

It is quite interesting to know the development of Java technology, which is widely accepted in
the area of networked/distributed computing. Java evolved from a project developing a language
for programming consumer electronic devices at Sun Microsystems, USA.

Sun’s Stealth Project in 1990 was aimed to do research in the area of application of
computers in the consumer electronics market. Bill Joy, James Gosling, Mike Sheridan, Patrick
Naughton (formerly the project leader of Sun’s Open Windows user environment), and several
other individuals discussed the ideas for the Stealth Project in January 1991.The vision of this
project was to develop smart consumer electronic devices that could all be centrally controlled
and programmed from a handheld-remote-control-like device. The Stealth group began to work
to achieve this goal. It was realized that a platform-independent development-environment was
needed.

Green Project was initiated by Patrick Naughton, Mike Sheridan, and James Gosling of
Sun Microsystems in 1991 (Members of the Stealth Project, which later became known as the
Green Project) The tasks of the project were divided amongst the members of Green Project.
Mike Sheridan concentrated on business development, Patrick Naughton worked on the graphics
system, and James Gosling was to identify the appropriate programming language for the Green
Project. Even though creating a new language was not the aim of Green Project, a new language
was created as a programming tool in this project since C++ was found unsuitable for the project.

An intelligent remote control called *7 (Star Seven) was delivered as the first product of
Green Project in 1992. It is a PDA- like device comprising of a new language oak, an operating
system called GreenOS, user interface, and hardware. This device was quite impressive to Sun
Executives. But no customer was interested in this project. The market was not conducive to this
type of device in the consumer electronics industry.

The new language Oak was created by James Gosling, a Green Team member,
specifically for *7. Gosling named the new language Oak because that name was struck while
looking at an oak three outside of his office window. The name Oak was later renamed to Java
in order to avoid legal issues since Oak was the name of an existing language.

0132cs111116
 In November 1992, the Green Project was incorporated under the name FirstPerson. In
1993. Time-Warner was demanding for proposals for set-top box operating systems and video-
on-demand technology with an objective of sending the data to consumer all over the country for
display on the television sets. At the same time (1993(, NCSA released the first graphical web
browser Mosaic 1.0, an easy-to-use front end to the World Wide Web.

When FirstPerson was bidding on the Time-Warner TV trial based on video-on-demand

technology, Time-Warner chose Silicon Graphics, Inc. (SGI) over Sun. Hence, half of the
members of FirstPerson left for SGI and the remaining members continued to work at Sun.

Mosaic web browser revolutionized people’s perceptions. The remaining member of

FirstPerson returned to work on Java (Oak was renamed Java) to develop Java-based web
browser. FirstPerson was dissolved gradually. Naughton and Jonathan Payne developed
WebRunner (named after the movie Blade Runner). Later WevRunner was officially announced
as the HotJavaTM browser in 1994. This was the turning point for Java. At that time the World
Wide Web changed the face of Internet and it was winning the race on Internet.

Arthur Ban Hoff implemented the Java compiler in Java itself whereas Gosling
implemented it in C. The Java compiler, written in Java made the people to accept Java as a full-
featured language.
Sun Microsystems official y announced Java environment at Sun World’95 on May 23,
1995. Java entered into the mainstream of the Internet after a struggle for about four years.
Netscape Communications incorporated Java into its web browser Netscape Navigator. Within a
decade, Java was destined to be the most overreaching technology in the Internet. Java was not
restricted to the Internet alone. The initial goal of Sun was also achieved by using Java
technology in interactive set-top boxes, hand-held devices and other consumer electronics
products.
Sun released the first version 1.0 of Java in 1996. Java is an object-oriented programming
language which evolved from C++. It is also a high-level programming language. The different
forms of Java versions are discussed in the next section.

History of Java
Year Java - Versions and Features
1990 Sun Microsystems started Stealth project supporting application of computers in the
consumer electronics market.
1991 The Green project started with the members of Stealth project such as James Gosling,
Patrick Naughton, and Mike Sheridan. A new programming language, called Oak was
created by Gosling.
1992 An intelligent remote control called StarSeven was delivered. The Green Project was
incorporated was incorporated under the name FirstPerson.
1993 Mosaic Web browser was introduced in the world of Internet.
1994 HotJava Web browser was announced by Sun Microsystems.
1995 Oak was renamed as Java. Sun officially announced Java technology.
1996 Sun released the first version 1.0 of Java. Core Language features supporting: I/O

0132cs111116
 facility, Utilities, Network Programming, User Interface – AWT, Applets, and
Multithreading.
1997 Sun released JDK1.1 by including new features such as addition of inner classes to
the language and capabilities such as JavaBeans, JDBC(Java Data Base
Connectivity), and RMI (Remote Method Invocation).
1998 Java 2 Platform, Standard Edition (J2SE)1.2, code named as Playground, was
released. It replaced JDK and distinguished the base platform from j2ee (Java 2
Platform, Enterprose Edition) and J2ME (Java 2Platform, Micro Edition). The key
features include Swing graphical API, Java IDL (Interface Definition Language) to
support CORBA interoperability. They also added Collections framework to support
various data structures. For the first time, JVM was equipped with a JIT (Just-in-
Time) compiler.
2000 J2SE 1.3, code named as Kestrel, was released with key features such as JavaSound
API to support audio operations (e.g., audio playback and capture/recording, mixing,
sequencing, and synthesis), Java Naming and Directory Interface (JNDI), and Java
Platform Debugger Architecture (JPDA).
2002 H2SE 1.4, code named as Merlin, was released with key features such as (a) image
I/O API for manipulating images in formats like JPEG and PNG, (b) integrated XML
parser and XSLT processor (JAXP), integrated security and cryptography extensions,
(c) Java Web Start supporting deployment of Java software applications over the
network.
2004 J2SE 5.0, code named as Tiger, was released with enhancement of Java platform and
inclusion of a number of significant new language features such as Generics,
Enhanced for Loop, Autoboxing/Unboxing, Typesafe Enums, Varags, Static Import,
and Metadata supporting declarative style programming annotation of source code.
2006 Java SE 6.0, code named as Mustang, was released with enhancement of performance
in Swing, JDBC 4.0 support, Java Compiler API, Upgrade of JAXB to version 2.0,
including integration of a StAX parser, support for pluggable annotations, and many
GUI improvements.
2008 Java SE 7.0, code named as Dolphin, with native support for XML recognizing its
foundation for Web services.

0132cs111116
 FEATURES OF JAVA

According to Sun, Java is defined as a simple, object-oriented, distributed, interpreted, robust,

secure, architecture –neutral, portable, high performance, multithreaded, and dynamic
programming language and platform.

Java is simple because the syntax of well-known languages such as C and C++ are used with
modifications meant for simplification and improvement. It is easy to read and write Java code if
the reader is familiar with C/C++.

Almost everything in Java is centered on creating objects, manipulating the objects and making
objects work together. Only the primitive operations and data types are at the sub-object level.
Hence Java is an object-oriented programming language.

An application can be distributed in many systems which are connected together. Since
networking capability is incorporated in Java, the data/file can be sent across many systems to
run the application.

Java is robust because it is more reliable. It ensures the reliability by providing early checking
for possible errors. It eliminates error-prone constructs such as pointer. It eliminates error-prone
constructs such as pointer. It also supports runtime error handling.

Java programs are compiled to a byte code format that can be read and run by interpreters on
many platforms including Windows, Linux, etc. Hence, it is architecture neutral. Because of this
feature it is portable to new hardware and operating systems.

Although the speed of execution of Java programs is slower compared to C/C++ programs, Java
is meant for distributed applications. Whenever the file/data is transmitted from one system to
another, the performance is not affected. Hence, it is having high performance.

Java supports multithreaded programming to perform several tasks simultaneously. Any code
can be loaded without recompilation at runtime. Hence it is dynamic.

0132cs111116