Grade 10
Grade 10
Grade 10
EIM NCII-GRADE X
Name of Learner: _____________________________ Grade Level: _______________
Section: ___________________________ Date: ________________
General Instruction: Erasures are considered wrong and using of pencil is PROHIBITED
Test I: Identification:
1. There are numerous types of fire alarm systems. What are those?
a. _____________________________________________________________
2. What does a fire alarm system do? Explain how it can help you.
a. _____________________________________________________________
3. It is a process of removing sharp edges or burrs left after cutting the pipe.
a. _____________________________________________________________
4. What are the different components of fire alarm system?
a. _____________________________________________________________
5. What is the use of manual pull station?
a. _____________________________________________________________
6. It is a conduit fitting used to make a 90 degree change in direction of the conduit run to a
quarter bend
a. ____________________________________________________________
7. Each zone is identified by an indicator bulb, a text display, or both at the Fire Alarm
Control Panel. What do you call this type of fire alarm?
a. _________________________________________________________________
8. A fire alarm that can be connected to at least two sounder circuits, which could include
bells, electronic sounders, or other audible fire alarm devices
a. __________________________________________________________________
9. A kind of fire alarm in which each detector has its own computer that analyses the
environment around it and transmits to the Control Panel whether there is a fire, a
problem, or whether the detector head needs to be cleaned.
a. __________________________________________________________________
10.Large establishments can be monitored from a single panel thanks to the availability of fire
alarm systems with up to eight loops.
a. _________________________________________________________________
11.How many degrees in the direction of conduit run does a quarter angle bend provides?
a. _________________________________________________________________
12.What size of flexible metallic conduit can accommodate at least ten (1010) 8.08.0 mmmm
(#88 AWG) wires?
a. _________________________________________________________________
13.Fire alarm device designed to respond when the convicted thermal energy of a fire
increases the temperature of a heat sensitive element.
a. _________________________________________________________________
14. It is a type of fitting which is used to change direction.
a. __________________________________________________________________
15.Smoke detector that obstructs a light beam between a light source and a photocell with
smoke.
a. __________________________________________________________________
16.This type of fire detection equipment can be used to protect large areas with the light
source and photocell positioned some distance apart.
a. __________________________________________________________________
17.It is a short length conduit or tubing which is used to extend a conduit system and also
used between conduit and tubing such as boxes or enclosures between two boxes.
a. _________________________________________________________________
18.Detectors that combine optical and thermal sensor inputs and process them using a
complex algorithm integrated within the detector circuitry.
a. ________________________________________________________________
19.A device that allows personnel to activate the alarm by breaking the frangible part on the
fascia; the alarm is then activated.
a. _________________________________________________________________
20.What other elements composed a fire alarm system?
a. _________________________________________________________________
5. _____________
2. In a 6 band color code the, what does the 6th band represent?
a. a. Temperature Coefficient b. Multiplier c. Tolerance d. None of these
Test IV-Using the color chart, decode the value of the following resistors and indicate the
tolerance:
1. Brown, Black, Red, Gold. _____________________
2. Yellow Violet, Yellow, Gold. ______________________
3. Brown, Black, Green, Gold. ______________________
4. Blue, Grey, Black, Gold. ______________________
5. Orange, White, Orange, Gold. ______________________
Test V- What are the color bands on the following value resistors all of which have a 5%
tolerance?
1. 22 k Ω ___________________________________________________________
2. 10 Ω ___________________________________________________________
3. 10 k Ω ___________________________________________________________
4. 470 kΩ __________________________________________________________
5. 33 kΩ ___________________________________________________________
Test VI- Draw a actual connection diagram of a fire alarm control system consist of the following
FDAS components. (10 points)
+ - + - + - + -
+ -
SNDR Z1
+ - + -
+ - + - + G - + -
Table of Specifications
Grade IX
Distribution of Test Items Based on the
Revised Bloom’s Taxonomy of Cognitive Skills
Total
Code
Understanding
Remembering
Number
Evaluating
Analyzing
Applying
Creating
(G7Q1_#
Topics/Lessons of Items
,
Ex.
G7Q1_0
1)
Bending Non-metallic 3-6-11-12-14- Test VI: 1-10 16
Conduit 17
Total 50