Mountainsilos en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MOU NTAI N SI LOS

MINI HAY WRAPPERS


MOUNTAINSILOS 550 AV/550 AVE MOUNTAINSILOS 550 ATP
Mini wrapping machine designed to wrap cylindrical forage bales. Mini wrappers trailed by small tractors.
It is suitable for walk-behind tractors of all kinds and makes. STRENGTHS
Wrapping is completely automatic. MOUNTAINSILOS 550 ATP is a small machine that wraps small cylindrical
A practical electrically powered wrapper version is also available, bales of forage with film to turn it into silage. Its special design makes it
MOUNTAINSILOS 550 AVE, for working in closed spaces. possible to hook it up to all types of tractors by means of a three-point
linkage. It is driven by the tractor PTO via cardan shaft transmission.
STRENGTHS The wrapping of the bales is fully automatic: the operator only needs to
The mini wrapper MOUNTAINSILOS 550 AV represents the natural evo- set the type of wrapping he wishes (the film can be wrapped around the
lution of the agriculture mechanization. It is a small machine that wraps bale 2/4/6 times) and then pull the START lever.
forage in cylindrical bales. The mini wrapper is suitable for single-axle The machine stops automatically once the bale has been wrapped.
walk-behind tractors of all makes and models. Bales are wrapped by means
of the power unit PTO through a quick-coupling flange. TECHNICAL DATA
Wrapping is completely automatic: the operator just needs to set the num-
Machine weight 93 kg
ber of wrappings per bale and pull the START lever. After wrapping the ma-
chine stops automatically. A practical electrically powered version is also Plastic film: - width 25 cm
available, MOUNTAINSILOS 550 AVE, for working in closed spaces. - length 1,800 m
Film stretching 50%
TECHNICAL DATA Lap winding 6/4/2
Machine weight 89 kg

The mentioned data are not binding. CAEB INTERNATIONAL reserves the right to change its products at any time to incorporate technological developments.
Wrapping capacity: bale height 52 ÷ 73 cm
Plastic film: - width 25 cm Bale Ø 50 ÷ 60 cm
- length 1,800 m Bale weight 40 ÷ 50 kg
Film stretching 50%
Lap winding 6/4/2
Wrapping capacity: bale height 52 ÷ 73 cm
Bale Ø 50 ÷ 60 cm
Bale weight 40 ÷ 50 kg

MOUNTAINSILOS
550 AV / 550 AVE
MOUNTAINSILOS 550 ATP

CAEB INTERNATIONAL srl


via Botta Bassa, 22 - 24010 Petosino di Sorisole (BG) - Italy
tel. +39 035 570451 - fax +39 035 4129105 - [email protected] - www.caebinternational.it
MI N ICARGO
CARRIAGES FOR TRANSPORTING HAY BALES AND OTHER MATERIALS
Carriages linkable to all kinds of walk-behind tractors and re-
versible motocultivators simply by replacing a flange.
The MINICARGO carriages can be equipped with different wag-
ons to transport any kind of material such as, for example, timber.
STRENGTHS
MINICARGO is a range of carriages that can be Iinked to all kinds of
walk-behind tractors and reversible motocultivators by replacing a
flange. The carriages MINICARGO take advantage of their easy, quick steer-
ing motion as well as of their low centre of gravity to assure a good stabi-
lity. Thanks to their small dimensions, handiness and high loading capacity
the MINICARGO carriages are particularly suitable for hilly and mountain-
ous areas. The two MINICARGO versions have a different wagon, that can
easily be replaced depending on the operator’s specific needs.
The MINICARGO carriages are equipped with a special system that allows
to easily tip big quantities of heavy material. Their unique four-wheeled
support allows the operator to easily operate without sustaining the ma-
chine. The front wheels are controlled by a handy, quick-acting steering
which avoids any effort to the driver.
The MINICARGO carriages are linked on the front, so that the weight can

The mentioned data are not binding. CAEB INTERNATIONAL reserves the right to change its products at any time to incorporate technological developments.
act on the rear driving wheels and therefore have a better grip on the
ground when the machine is working uphill.

TECHNICAL DATA
MINICARGO MCL
Carrying capacity up to 300 kg MINICARGO MCL
Tubular steel frame 50 x 50 x 3 mm
Wheels bearing-supported direction wheels 3.50.8 PR 4
Front steering with bearing-supported motion
Tipping on the front, manual
Central rocking joint with 15° of longitudinal tilt
Platform width 1,000 mm
Platform length 670 mm
REMARK
It is advisable to fit brakes.

MINICARGO MCM
Carrying capacity up to 400 kg
Capacity 220 l
Tubular steel frame 50 x 50 x 3 mm
Wheels bearing-supported direction wheels 3.50.8 PR 4
Front steering with bearing-supported motion
Tipping on the front, manual
Central rocking joint with 15° of longitudinal tilt

MINICARGO MCM

CAEB INTERNATIONAL srl


via Botta Bassa, 22 - 24010 Petosino di Sorisole (BG) - Italy
tel. +39 035 570451 - fax +39 035 4129105 - [email protected] - www.caebinternational.it

You might also like