iRTIQA DESIGNS

PROPOSED STRUCTURAL DRAWINGS OF

ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE.

DISPATCH DATE: 02/09/2022 REF. NO: STR-XXX REV. VERSION : 000

CONSULTANT:

iRTIQA DESIGNS
15-DD, C.C.A, D.H.A PHASE 4, LAHORE, PAKISTAN

) +92-334-9999609,
8 www.irtiqadesigns.com
+ [email protected]
+ [email protected]

ENGR. M.HARIS HAMEED ENGR. ALI RAZA KHALID

MS. Structural Engineering (PE) MS. Structural Engineering (PE)
PEC # CIVIL / 33877 PEC # CIVIL / 30820
+ [email protected] + [email protected]

THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 Fabrication shall be in accordance with standard practices and in compliance with the applicable section, relating to design
requirements and allowable stresses of the latest edition of the "AWS Structural Welding code D 1.1 and D 1.3

MATERIALS ASTM DESIGNATION MIN. YIELD STRENGTH

Web Plate (Built-up Sections) A572 Fy = 50KSI
Flange Plate (Built-up Sections) A572 Fy = 50KSI
Hot rolled Steel Shapes A36 Fy = 36KSI
Bracing Cable A475
Cold Form Light Gauge A653 Fy = 50KSI
Roof and Wall Sheets A792
Sag Rod/Rod Brace A36 Fy = 36KSI
Flange Bracing A36 Fy = 36KSI

MATERIALS ASTM DESIGNATION MIN. TENSILE STRENGTH

Machine Bolts & Nuts A307/F1554 Fu = 60KSI

High Strength Bolts (1" Dia & Less) A325-Type 1 Fu = 120KSI
High Strength Bolts (>1" to 1-1/2") A325-Type 1 Fu = 105KSI
Anchor Bolts (if supplied) A36/A307/F1554 Fu = 60KSI

PRIMER COAT ON PRIMARY MEMBER

Shop Primer paint is a rust inhibitive primer, which meets the end performance of building and is Grey Oxide color.
This paint is not intended for long-term exposure to the elements. is not responsible for any deterioration of the shop primer paint
as a result of improper handling and/or storage. (Section 6.5 AISC Code of Standard Practice 9th Edition). Normal thichness of
primer Shall be 1 mil unless otherwise specified in Contract Documents.

GALVANIZED SECONDARY MEMBER

All Roof Purlins and Wall Studs and Tracks shall be galavanized member as per ASTM A653 specifications.

A325 BOLT TIGHTENING REQUIREMENTS

All high strength bolts are A325-N unless noted otherwise.

Structural bolts shall be tightened by the turn-of-the-nut method in accordance with 9th Edition AISC "Specification for Structural
Joints" using ASTM A 325.

All bolted connection unless noted are desigend as bearing type connection with threads not excluded from the shear plane.

WELD CONNECTIONS

All web to flange welds are continuous SMAW fillet weld in accordance with requirements of the latest edition of the "AWS
Structural Welding code" using E60xx Electrodes

BUILDING SPECIFICATION

The structure under this contract has been designed and detailed for the loads and conditions stipulated in the contract and
shown on these drawings. Any alterations to the structural system or removal of any component parts, or the additions of
other construction materials or loads must be done under the advise of a Registered Structural Engineer.

ARCHITECTURE BY
PROJECT :
CLIENT NAME:
DRAWING TITLE :
PROPOSED STRUCTURAL DRAWINGS OF 1
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE
2 DRAWN BY : SCALE :

CONSULTANT: 3 DESIGNED BY : DATE :

IRTIQA DESIGNS
15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 4
iRTIQA DESIGNS CONTACT #+92-334-9999609 CHECKED BY: DRAWING. NO. REV. NO.

EMAIL : [email protected] 5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 A. GENERAL D. EMBEDMENT LENGTHS

BAR SIZE 10 Ø 13 Ø 16 Ø 19 Ø 25Ø

EMBEDMENT LENGTH (in) 21 28 34 41 55

E. LAP LENGTH

BAR SIZE 10 Ø 13 Ø 16 Ø 19 Ø 25Ø

LAP LENGTH (in) 23 30 38 45 60

F. CONSTRUCTION JOINTS

B. FOUNDATION AND EARTHWORK.

G- BRICK MASONRY WORKS

C. REINFORCED CONCRETE.

H. PROPS, FORMWORK AND CURING.

I. OPENINGS.CONCEALED CABLES AND CAST -IN CONDUITS

EQ

3h (Min>)
h

h/3 (Max)
EQ

ARCHITECTURE BY
PROJECT :
CLIENT NAME:
DRAWING TITLE :
PROPOSED STRUCTURAL DRAWINGS OF 1
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE
2 DRAWN BY : SCALE :

CONSULTANT: 3 DESIGNED BY : DATE :

IRTIQA DESIGNS
15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 4
iRTIQA DESIGNS CONTACT #+92-334-9999609 CHECKED BY: DRAWING. NO. REV. NO.

EMAIL : [email protected] 5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 1 2 3 4 4' 5 6

C
F2 F2 F2 F2 F2 F2 F2

B
F1 F1 F1 F1 F1 F1 F1

A F1 F1 F1 F1 F1 F1 F1

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 1 2 3 4 4' 5 6

C
C-1 C-1 C-1 C-3 C-1 C-3 C-3

C-2
B C-2 C-2 C-2 C-2 C-2 C-2

C-1 C-1 C-1 C-3 C-1 C-3 C-3

A

35 195 35
124
35

6 Nos 24 mmØ- A 307

20

High Strength Bolts

D
E

ANCHOR BOLT DIMENSIONAL PROPERTIES (ASTM A-307)

410

300

8mm FILLET WELD (FWAR) BOLT WEIGHT A B C D E RADIUS TOTAL EMBEDMENT

A

E-60 ELECTRODE NOMINAL THREAD "R" STRAIGHT STRAIGHT

DIAMETER PITCH LENGTH LENGTH
(Kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
20

M24 1.50 3.55 650 110 100 125 50 50 817 525

B

Hole Ø = 27mm 22mm Grade 215Plate

35

320x410 C

DETAILS OF BASE PLATE & J BOLT

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 1 2 3 4 4' 5 6

C C-4 C-4 C-4 C-4

B C-2 C-2

C-4 C-4 C-4 C-4

A

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 R.C.C
COLUMN

HANDDRAIL PIPES T=5mm

961 [3'-2"]
4.5" 4.5"

4'-0"
18"

466 [1'-6"]
466 [1'-6"]
12"

Chequerd PL 4mm

C250x30
4"

250

C250x30
#4@5" B/W
120 [5"]

150
120 [5"] 5'-0"X5'-0" C250x30
( 0.00 ) Chequerd PL 4mm
L64x64x4.8
120 [5"]

NOTE: Weld sizes:

Two Anchors of 400mm Welds of chequered plate with C250x30 are 4mm
#4@5" length and Φ 18 continuous fillet welds
Weld of angle L64x64x4.8 With C250x30 and
shequered plate are 4mm staggered fillet welds of
100mm length.
Stairs Details
4.5"

#4@5"
5'-0"

4.5"
375 [1'-3"] 375 [1'-3"]
4.5"

450 [1'-6"]
120 [5"]

450 [1'-6"]

120 [5"]
5'-0"
120 [5"]

NOTES:
1. No Geo-Technical report was not provided by the
client, The bearing capacity of the surrounding area
(0.7 TSF) was used for this design to the best of the
knowledge and experience of the Structural Engineer.

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 ROOF CORRUGATED
SHEET 0.5mm
ROOF PURLIN

REINFORCED MEZZANINE DECK PANEL 0.7mm

CONCRETE SLAB 3" Thick. WITH SELF DRILLING FASTNERS 3@ 9"c/c 3@ 9"c/c

RAFTER

DRY WALL

4040 [13'-3"]
MEZZANINE DECK PANEL DETAIL
3660 [12']

COLUMN
MEZZANINE DECK PANEL 0.7mm
W/ITH SELF DRILLING FASTNERS
STEEL 3@ 9"c/c REINFORCED
CONCRETE SLAB 3" Thick
A

PL-1
12mm Th.
20Ø BOLTS

MEZZANINE BEAM

JOIST 3'-6" @ c/c

BEAM
A
BEAM

JOIST JOIST

PL-1
12mm Th.
COLUMN 20Ø BOLTS
3660 [12']

JOIST 3'-6" @ c/c

CENTER CONNECTION
SECTION A-A

JOIST

PL-1
12mm Th.
20Ø BOLTS

JOIST 3'-6" @ c/c

B A OUTER CONNECTION
SECTION A-A

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 Top Tracks Top Tracks Top Tracks

Mid Tracks Mid Tracks Mid Tracks

Stud (At corners)

Stud Sections

Stud Sections

Stud Sections

Stud Sections

Stud Sections

Stud (At corners)

Stud (At corners)

WINDOW WINDOW WINDOW

Mid Tracks Mid Tracks Mid Tracks Mid Tracks
LGS U SECTION

LGS C STUD

Bottom Tracks Bottom Tracks Bottom Tracks Bottom Tracks Bottom Tracks

Top Tracks Top Tracks Top Tracks Top Tracks Top Tracks

Mid Tracks Mid Tracks Mid Tracks Mid Tracks Mid Tracks Mid Tracks

Stud (At corners)

Stud Sections

Stud Sections

Stud Sections

Stud Sections

Stud Sections

Stud Sections

Stud (At corners)

Stud (At corners)

WINDOW

WINDOW

WINDOW

WINDOW
Mid Tracks Mid Tracks
SHUTTER DOOR SHUTTER DOOR DOOR SHUTTER DOOR ROLLER SHUTTER LGS U SECTION
DOOR

LGS C STUD

Bottom Tracks Bottom Tracks Bottom Tracks Bottom Tracks Bottom Tracks Bottom Tracks

29032 [95'-3"]

STUD SPACING 610mm c/c

42 42
92 92
TOP\BOTTOM TRACK MID TRACK SECTION
SECTION Th.0.7 mm
Th.1.0 mm

WALL HEIGHT

12 12
40 40
STRUCTURAL
90 90 SHEATHING PANEL
FIELD FASTENER
STUD SECTION Th. 0.7mm STUD SECTION (At Corners)
Th. 1.0 mm
EDGE FASTENER

Dry Wall
ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 ROOF CORRUGATED
SHEET 0.5mm

Top Tracks

42 42 80

92 92
TOP\BOTTOM TRACK MID TRACK SECTION
10

SECTION Th.0.7 mm 80
Mid Tracks Th.1.0 mm

10

Stud (At corners)

Stud (At corners)

12 12 EXTERNAL CORNER CAPPING

GIRTH =180mm
40 40 GI. 0.45mm TH.
Mid Tracks Mid Tracks
COLOR = SAME AS ROOF SHEETING
90 90
LGS C STUD STUD SECTION Th. 0.7mm STUD SECTION (At Corners)
Th. 1.0 mm

Bottom Tracks

Top Tracks

STUD

Mid Tracks FASTEN CLIP 80 X 40 X1.6 TO STUD

Stud (At corners)

W / SCREWS 4# 8 SCREW

1/2" Ø ANCHOR BOLT @ 4' SPACING

TRACK
Mid Tracks Mid Tracks
LGS U SECTION
SILL SEALER
SCREW(S) THROUGH
#8 SDS ONE ON EACH SIDE OF FLANGE
LGS C STUD

Bottom Tracks ANCHOR BOLT EMBENDED 4" IN CONCRETE

FOUNDATION

Connection of Stud by Bottom

Track and Anchor Bolt at
B A
Founaditon Level

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 1 2 3 4 4'
4 5 6

B
J-2 J-3 J-1 J-1 J-2 J-3

SKY LIGHT SKY LIGHT

J-2 J-3 J-2 J-3
J-1 J-1
B-1

B-1

B-1

B-2

B-1

B-1

B-1
J-2 J-3 J-2 J-3
J-1 J-1

J-2 J-3 J-2 J-3

J-1 J-1

SKY LIGHT SKY LIGHT

J-2 J-3 J-2 J-3
J-1 J-1
B-1

B-1

B-1

B-2

B-1

B-1

B-1
J-2 J-3 J-2 J-3
J-1 J-1

J-2 J-3 J-1 J-1 J-2 J-3

A S-3 S-3 S-3 S-3
S-3
BEAM
JOIST
NOTE: Along beams, provide 12mm diameter bull head shear studs of 60mm length by punching ribs of decking
sheet at spacing not more than 400mm. Shear studs should be staggered about the web.

MEZZANINE DECK PANEL 0.7mm THICK (With Ribs)

REINFORCED WITH SELF DRILLING FASTENERS
CONCRETE SLAB 3" Thick. STEEL 3@ 9"c/c STEEL 3@ 9"c/c
STEEL 3@ 9"c/c REINFORCED MEZZANINE DECK PANEL 0.7mm
CONCRETE SLAB 3" Thick WITH SELF DRILLING FASTNERS

JOIST JOIST JOIST

PL-1 PL-1 PL-1

12mm Th. 12mm Th. 12mm Th.
20Ø BOLTS 20Ø BOLTS 20Ø BOLTS

MEZZANINE BEAM JOIST 3'-6" @ c/c JOIST 3'-6" @ c/c

MEZZANINE DECK PANEL DETAIL JOIST 4' @ c/c OUTER CONNECTION CENTER CONNECTION
SECTION A-A SECTION A-A

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 1 2 3 4 4'

60
Z-1 Z-1 Z-1
B

20
S-2 S-2 S-2

Z-1 Z-1 Z-1

Z-1 Z-1 Z-1

150
Z-1
Z-1 Z-1
R-1

R-1

R-1

R-1
Z-1 Z-1 Z-1
SKY
LIGHT SKY LIGHT
Z-1 Z-1 Z-1

20
SKY 60
Z-1 Z-1 Z-1
LIGHT
X-SECTION of Z-1
Z-1 Z-1 Z-1 0F 1.9 mm thick Z PURLIN

Z-1 Z-1 Z-1

S-2 S-2 S-2
A Z-1 Z-1 Z-1
PURLIN Sky Light in glass as per Sky Light in glass as per
architectural detail architectural detail
NOTE: 10mm diameter sag rods are
Supported on section S-2 Supported on section S-2
provided at a regular intervals of 1500mm

770
OVERLAP PING
CL-1 OF PURLIN
PURLIN
(2)-M12 x 35mm LONG
MILD STEEL BOLTS

RIGID FRAME RAFTER

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 34 127 34
125 125 125 60

10
125

36
6

24
125

24
8
8No. 12mm Ø,Grade 8.8 Bolts

A+115=465
125 14mmØ Hole

A-68=282
400

400

400

A=350
6
375
5 6 6 6 6 5

300

200

24
6mm FILLET WELD (FWAR)

10

24
6

6
E-60 ELECTRODE

36
12mm Grade 215Plate
127x318

125 150
10
8

NOTE: The givenplate

125
125 125 125 dimensions are for 300mm
8

deep section, The depth of

5
4
member is expressed by D
350

350

6 6 5 5 4 5 a
300

250

250
250
6mm FILLET WELD (FWAR)
E-60 ELECTRODE
10
8

5
4
6mm FILLET WELD (FWAR)

b
S300 STEEL

b
axbx8 E-60 ELECTRODE

S300 STEEL
axbx8
8 MM THICK
8 MM THICK

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS

 100 [4"]
920 [3']
100 [4"]

100 [4"]
920 [3']
C-1 at Grid-1 J-1 at the required height C-2 at Grid-1 J-1 at the required height C-1 at Grid-1

S1

920 [3']
S1 T1 T1 T1 T1 T1 T2 T2 T1 T1 T1 T1 S1
T1 T1
C

1212 [4']
T1
T1

Web of Column C-1

T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3

A T1
684 [2'-3"] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 300 [1'] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 684 [2'-3"]

7315 [24']

3650 [12']
1212 [4']
T1 Details of C
100 [4"] T1
920 [3']

100 [4"]
T1
C-1 at Grid-1 B-1 at Grid-1 C-2 at Grid-1 B-1 at Grid-1 C-1 at Grid-1

1226 [4']

613 [2']
T1 T1 T1
S1 T1 T1 T1 T1 T2 T2 T1 T1 T1 T1 T1 S1
T1 T1
T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3
B S1
A
684 [2'-3"] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 300 [1'] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 706 [2'-4"] 684 [2'-3"]

7315 [24']
Details of A
Details of B

Note: Covering sheet of 0.45mm thickness and

matching color as per architecture requirements
with trims as per architectural details

613 [2'] 100 [4"]

24 90 24
43 75 75 75
26

75
17
4

17

75

75

75
8No. 10mm Ø,Grade 8.8 Bolts
4 12mmØ Hole
200

286

166
200

TUBE T1 (Th.1.5 mm) TUBE T2 (Th.4.0 mm) TUBE T3 (Th.1.5 mm)

17

4mm FILLET WELD (FWAR) NOTE: Connection of Tubes:

4

17

E-60 ELECTRODE Connections of Tube T-2 is 4mm continuous weld all around.
Connections for Tube T-1 and T-3 are using 1.5mm thick steel plate (on both
S1 sides of the tubes) using at least four self screws on each side.
Connections of T-1 and T-3 with PEB is using angle cleat of 3mm thickness.
Connection plate 6mm Grade 215Plate
90x286
for S1

ARCHITECTURE BY PROJECT :

PROJECT: CONSULTANT: DRAWING TITLE :

1
PROPOSED STRUCTURAL DRAWINGS OF IRTIQA DESIGNS
ENTRY GATE AT LAHORE GALAXY RESIDENCE, LAHORE 15-DD, C.C.A, D.H.A PHASE 4,LAHORE, PAKISTAN 2 DRAWN BY : SCALE :

CONTACT #+92-334-9999609
3
EMAIL : [email protected] DESIGNED BY : DATE :

4
iRTIQA DESIGNS CHECKED BY: DRAWING. NO. REV. NO.

5 THIS PROJECT IS NOT SUPERVISED BY IRTIQA DESIGNS