STAR Anhydride Line Pipe High Pressure Standard Design Data Sheet
STAR Anhydride Line Pipe High Pressure Standard Design Data Sheet
STAR Anhydride Line Pipe High Pressure Standard Design Data Sheet
Flow Factors
• Hazen-Williams C =150
• Absolute Roughness = 0.00021 in. (0.00533 mm)
Nominal Moduli
• Modulus of Elasticity
Hoop - 3.5 x 106 psi (24,1 GPa)
Axial - 1.5 x 106 psi (10,3 GPa)
• Poisson’s Ratio (Minor) = 0.38 • ACT - Molded threads using a graphite, ceramic
and epoxy composite for high performance
applications.
Physical Properties
• Density = 121 lbs/cu ft (1938 kgs/cu m) • PGT - Typical ground threads produced with
• Specific Gravity = 1.94 numerical controlled grinding equipment.
• All 11/2” EUE 10rd and 2 3/8” - 4 1/2” EUE 8rd API
Thermal Properties threads conform to API 5B Table 14, 14 Edition (L4
• Coefficient of Thermal Conductivity is minimum) and all 5 1/2” - 9 5/8” OD 8rd casing
0.23 BTU/(ft•hr•°F) (0.4 W/(m•C°)) threads conform to API 5B Table 7, 14 Edition (L4 is
• Coefficient of Thermal Expansion minimum).
13.7 x 10-6 in/in/°F (24,7 x 10-6 mm/mm/°C)
www.fgspipe.com • [email protected]
SIZE NOMINAL PIPE DIMENSIONS
Minimum Short-Term
Inside Outside Wall Pipe Connection Bending Tensile
Diameter Diameter Thickness Weight Diameter Radius Rating Mfg.
Pipe Thread In (mm) In (mm) In (mm) Lbs/ft (kg/m) In (mm) Ft (m) Lbs (kgs) Loc.*
2
SIZE NOMINAL PIPE DIMENSIONS
Minimum Short-Term
Inside Outside Wall Pipe Connection Bending Tensile
Diameter Diameter Thickness Weight Diameter Radius Rating Mfg.
Pipe Thread In (mm) In (mm) In (mm) Lbs/ft (kg/m) In (mm) Ft (m) Lbs (kgs) Loc.*
Series 1750 (12,1 MPa)(1) - ACT (All Sizes), PGT (2”-4” Sizes)
1½ 1.90 1.50 (38,1) 1.68 (42,6) 0.09 (2,2) 0.46 (0,7) 2.51 (63,9) 84 (25,6) 1300 (590) W,H
2 2 3/8 2.00 (50,8) 2.23 (56,8) 0.12 (3,0) 0.77 (1,1) 3.07 (77,9) 112 (34,1) 2200 (998) W,H,B
2½ 2 7/8 2.38 (60,5) 2.65 (67,3) 0.14 (3,6) 1.13 (1,7) 3.68 (93,5) 133 (40,5) 3300 (1497) W
2½ 2 7/8 2.43 (61,7) 2.71 (69,0) 0.14 (3,6) 1.13 (1,7) 3.68 (93,4) 136 (41,5) 3300 (1497) H
3 3 1/2 3.00 (76,2) 3.35 (85,1) 0.18 (4,5) 1.69 (2,5) 4.45 (113,1) 168 (51,2) 5000 (2268) W,H,B
4 4 1/2 3.75 (95,3) 4.19 (106,4) 0.22 (5,6) 2.86 (4,3) 5.58 (141,7) 211 (64,3) 8500 (3856) B
4 4 1/2 3.91 (99,3) 4.37 (111,0) 0.23 (5,8) 2.83 (4,2) 5.62 (142,8) 219 (66,8) 8600 (3901) W,H
5 5 1/2 4.74 (120,4) 5.30 (134,5) 0.28 (7,1) 4.21 (6,3) 6.52 (165,7) 266 (81,1) 12900 (5851) W
6 6 5/8 5.50 (139,7) 6.15 (156,1) 0.32 (8,2) 5.95 (8,8) 7.78 (197,5) 310 (94,5) 18100 (8210) W,H,B
8 8 5/8 7.50 (190,5) 8.38 (212,8) 0.44 (11,2) 10.41 (15,5) 10.17 (258,4) 421 (128,3) 32700 (14833) W,B
Series 2000 (13,8 MPa)(1) - ACT (All Sizes), PGT (2”-4” Sizes)
1½ 1.90 1.50 (38,1) 1.70 (43,3) 0.10 (2,6) 0.59 (0,9) 2.58 (65,4) 87 (26,5) 1700 (771) W,H
2 2 3/8 2.00 (50,8) 2.27 (57,7) 0.14 (3,4) 0.94 (1,4) 3.13 (79,5) 115 (35,1) 2800 (1270) W,H,B
2½ 2 7/8 2.38 (60,5) 2.70 (68,6) 0.16 (4,1) 1.34 (2,0) 3.74 (95,0) 136 (41,5) 4000 (1814) W
2½ 2 7/8 2.43 (61,7) 2.76 (70,1) 0.16 (4,2) 1.34 (2,0) 3.74 (94,9) 139 (42,4) 4100 (1860) H
3 3 1/2 3.00 (76,2) 3.41 (86,5) 0.20 (5,2) 1.95 (2,9) 4.52 (114,7) 171 (52,1) 5900 (2676) W,H,B
4 4 1/2 3.75 (95,3) 4.26 (108,2) 0.25 (6,4) 3.21 (4,8) 5.71 (145,0) 214 (65,2) 9600 (4355) B
4 4 1/2 3.91 (99,3) 4.44 (112,8) 0.26 (6,7) 3.50 (5,2) 5.74 (145,9) 225 (68,6) 10900 (4944) W,H
5 5 1/2 4.74 (120,4) 5.38 (136,7) 0.32 (8,1) 5.03 (7,5) 6.70 (170,2) 272 (82,9) 15700 (7122) W
6 6 5/8 5.50 (139,7) 6.24 (158,6) 0.37 (9,5) 6.50 (9,7) 7.96 (202,1) 313 (95,4) 19900 (9027) W,H,B
Series 2500 (17,2 MPa)(1) - ACT (All Sizes), PGT (2”-3” Sizes)
1½ 1.90 1.50 (38,1) 1.76 (44,7) 0.13 (3,3) 0.74 (1,1) 2.70 (68,6) 90 (27,4) 2200 (998) W,H
2 2 3/8 2.00 (50,8) 2.34 (59,6) 0.17 (4,4) 1.15 (1,7) 3.32 (84,2) 118 (36,0) 3500 (1588) W,H,B
2½ 2 7/8 2.38 (60,5) 2.78 (70,6) 0.20 (5,1) 1.59 (2,4) 3.93 (99,8) 140 (42,7) 4800 (2177) W
2½ 2 7/8 2.43 (61,7) 2.85 (72,4) 0.21 (5,3) 1.80 (2,7) 3.92 (99,7) 145 (44,2) 5600 (2540) H
3 3 1/2 3.00 (76,2) 3.52 (89,3) 0.26 (6,6) 2.53 (3,8) 4.77 (121,1) 177 (53,9) 7800 (3538) W,H,B
4 4 1/2 3.75 (95,3) 4.40 (111,8) 0.32 (8,1) 3.99 (5,9) 6.02 (152,9) 221 (67,4) 12100 (5489) B
4 4 1/2 3.91 (99,3) 4.58 (116,4) 0.34 (8,6) 4.26 (6,3) 5.99 (152,2) 231 (70,4) 13500 (6124) W,H
Series 3000 (20,7 MPa)(1) - ACT (All Sizes) or PGT (2” & 2 ½” Sizes)
1½ 1.90 1.50 (38,1) 1.82 (46,1) 0.16 (4,0) 0.90 (1,3) 2.83 (71,9) 93 (28,3) 2700 (1225) W,H
2 2 3/8 2.00 (50,8) 2.42 (61,5) 0.21 (5,4) 1.36 (2,0) 3.45 (87,5) 121 (36,9) 4200 (1905) W,H,B
2½ 2 7/8 2.38 (60,5) 2.88 (73,2) 0.25 (6,4) 2.09 (3,1) 4.58 (116,3) 145 (44,2) 6000 (2722) W
2½ 2 7/8 2.43 (61,7) 2.94 (74,8) 0.26 (6,5) 2.07 (3,1) 4.11 (104,5) 149 (45,4) 6500 (2948) H
3** 3 1/2 3.00 (76,2) 3.61 (91,7) 0.31 (7,7) 3.13 (4,7) 4.96 (125,9) 183 (55,8) 9900 (4491) W,H
4 4 1/2 3.75 (95,3) 4.54 (115,4) 0.40 (10,1) 5.08 (7,6) 6.33 (160,7) 230 (70,1) 15800 (7167) W,H,B
**3” rated to 2900 psi.
(1)
Series Rating - All ratings are maximum operating limits. Exceeding these limits will void the warranty on all
NOV Fiber Glass Systems pipe.
*Manufacturing Location
W = Wichita H = Harbin B = Brazil
3
Joining System Information (API 8rd Thread)
Joining System
1 1/2 2 2 1/2 3 4 5 6 8 8
Pipe Size - Inches
Thread Size 1.90” 2 3/8” 2 7/8” 3 1/2” 4 1/2” 5 1/2” 6 5/8” 8 5/8” 9 5/8”
EUE 10rd EUE 8rd EUE 8rd EUE 8rd EUE 8rd OD 8rd OD 8rd OD 8rd OD 8rd
• Pin Upset O.D. In 2.15 2.60 3.10 3.75 4.75 5.55 6.65 8.65 9.65
(mm) (54,6) (66,0) (78,7) (95,3) (120,7) (141,0) (168,9) (219,7) (245,1)
• Thread Length In 2.36 2.94 3.25 3.50 3.88 4.75 4.25 4.85 5.13
(mm) (59,9) (74,7) (82,6) (88,9) (98,6) (120,7) (108,0) (123,2) (130,3)
• Make Up Length Loss In 2.06 2.56 2.86 3.13 3.50 4.38 3.88 4.50 4.75
(mm) (52,4) (65,1) (73,0) (79,4) (88,9) (111,1) (98,4) (114,3) (120,7)
API CONNECTIONS - All products are produced integral joint unless indicated (TC) Threaded and Coupled. Any order may include up to 15% threaded and
coupled pipe. All 11/2” EUE 10rd and 2 3/8” - 41/2” EUE 8rd API threads conform to API 5B Table 14, 14 Edition (L4 is minimum) and all 51/2” - 9 5/8” OD 8rd
casing threads conform to API 5B Table 7, 14 Edition (L4 is minimum).
11.4 Year Life, LTHS 24,503 psi (169,0) MPa Pipe in (mm) Bbls/1,000 ft. (m3/km)
1½ 1.50 (38,1) 2.20 (1,1)
20 Year Life, LTHS 23,768 psi (163,9) MPa 2 2.00 (50,8) 3.90 (2,0)
(long term hydrostatic stress)
2½ 2.38 (60,5) 5.50 (2,9)
20 Year Life, LCL 2½ 2.43 (61,7) 5.70 (3,0)
22,297 psi (153,7) MPa
(Lower Confidence Limit)
3 3.00 (76,2) 8.70 (4,5)
4 3.75 (95,3) 13.70 (7,1)
4 3.91 (99,3) 14.80 (7,7)
5 4.74 (120,4) 21.80 (11,4)
6 5.50 (139,7) 29.40 (15,3)
6 5.85 (148,6) 33.20 (17,3)
8 7.50 (190,5) 54.60 (28,5)
National Oilwell Varco has produced this brochure for general information only, and it is not
intended for design purposes. Although every effort has been make to maintain the accuracy
and reliability of its contents, National Oilwell Varco in no way assumes responsibility for
liability for any loss, damage or injury resulting from the use of information and data herein
nor is any warranty expressed or implied. Always cross-reference the bulletin date with the
most current version listed at the web site noted in this literature. ISO 9001:2008
15HR-0004 / 15LR-0004.1
LICENSEE Q1 RATED
www.fgspipe.com • [email protected]