National Aeronautics and Space Administration

ARTEMIS I
Press Kit

www.nasa.gov  | #Artemis
Table of Contents

Section Page Number

Mission Overview 3

Major Mission Milestones 8

Mission Objectives 10

Countdown Timeline 12

Ascent and Mission Timeline 15

Weather Criteria 17

What’s On Board 20

Deep Space Exploration System 23

Space Communications and Navigation 25

Flight Facilities 27

Mission Personnel & Management 28

Lead Contractors and Suppliers 32

Contacts 35

Additional Multimedia Materials 39

Mission Overview

Artemis I is the first integrated test of NASA’s deep space exploration systems: the Orion spacecraft, Space Launch
System (SLS) rocket and the ground systems at the agency’s Kennedy Space Center in Florida. The first in a series
of increasingly complex missions, Artemis I is an uncrewed flight test that will provide a foundation for human deep
space exploration and demonstrate our commitment and capability to return humans to the Moon and extend beyond.

Launch Site: Launch Pad 39B at NASA’s Kennedy Space Center in Florida

Launch Date: Nov. 14, 2022

Launch Window: 12:07 a.m. EST to 1:16 p.m.

Mission Duration: 25 days, 11 hours, 21 minutes

Destination: Distant retrograde orbit around the Moon

Total Mission Miles: Approximately 1.3 million miles (2.1 million kilometers)

Targeted Splashdown Site: Pacific Ocean, off the coast of San Diego

Return Speed: Up to 25,000 mph (40,000 kph)

Splashdown: Dec. 09, 2022

During this flight, Orion will launch atop the most powerful rocket in the world and fly farther than any spacecraft
built for humans has ever flown. Over the course of the mission, it will travel 280,000 miles (450,000 kilometers) from
Earth and 40,000 miles (64,000 kilometers) beyond the far side of the Moon. Orion will stay in space longer than
any human spacecraft has without docking to a space station and return home faster and hotter than ever before.

This first Artemis mission will demonstrate the performance of both Orion and the SLS rocket and test our capabilities
to orbit the Moon and return to Earth. The flight will pave the way for future missions to the lunar vicinity, including
landing the first woman and first person of color on the surface of the Moon.

With Artemis I, NASA sets the stage for human exploration into deep space, where astronauts will build and begin
testing the systems near the Moon needed for lunar surface missions and exploration to other destinations farther
from Earth, including Mars. With Artemis, NASA will collaborate with industry and international partners to establish
long-term exploration for the first time.

Artemis I Press Kit Back to Table of Contents 3

Launch

SLS and Orion will blast off from Launch Pad 39B at NASA’s modernized spaceport at Kennedy. Propelled by a pair
of five-segment boosters and four RS-25 engines, the rocket will reach the period of greatest atmospheric force
within 90 seconds. The solid rocket boosters will burn through their propellant and separate after approximately two
minutes, and the core stage and RS-25s will deplete propellant after approximately eight minutes. After jettisoning
the boosters, service module panels, and launch abort system, the core stage engines will shut down and the core
stage will separate from the spacecraft, leaving Orion attached to the interim cryogenic propulsion stage (ICPS) that
will propel it toward the Moon.

As the spacecraft makes an orbit of Earth and deploys its solar arrays, the ICPS will give Orion the big push it needs
to leave Earth’s orbit and travel toward the Moon. This maneuver, known as the trans-lunar injection, precisely
targets a point about the Moon that will guide Orion close enough to be captured by the Moon’s gravity.

Artemis I Press Kit Back to Table of Contents 4

In Space

Orion will separate from the ICPS approximately two hours after launch. The ICPS will then deploy ten small
satellites, known as CubeSats, along the way to study the Moon or head father out to deep space destinations.
As Orion continues on its path from Earth orbit to the Moon, it will be propelled by a service module provided by
ESA (European Space Agency) that will course-correct as needed along the way. The service module supplies the
spacecraft’s main propulsion system and power.

The outbound trip to the Moon will take several days, during which time engineers will evaluate the spacecraft’s
systems. Orion will fly about 60 miles (97 kilometers) above the surface of the Moon at its closest approach, and
then use the Moon’s gravitational force to propel Orion into a distant retrograde orbit, traveling about 40,000 miles
(64,000 kilometers) past the Moon. This distance is 30,000 miles (48,000 kilometers) farther than the previous record
set during Apollo 13 and the farthest in space any spacecraft built for humans has flown.

For its return trip to Earth, Orion will get another gravity assist from the Moon as it does a second close flyby, firing
engines at precisely the right time to harness the Moon’s gravity and accelerate back toward Earth, setting itself on
a trajectory to re-enter our planet’s atmosphere.

Artemis I Press Kit Back to Table of Contents 5

Landing

The mission will end with a test of Orion’s capability to return safely to Earth. Orion will enter Earth’s atmosphere
traveling at about 25,000 mph (40,000 kph). Earth’s atmosphere will slow the spacecraft down to a speed of about
300 mph (480 kph), producing temperatures of approximately 5,000 degrees Fahrenheit (2,800 degrees Celsius) and
testing the heat shield’s performance.

Once the spacecraft has passed this extreme heating phase of flight, the forward bay cover that protects its
parachutes will be jettisoned. Orion’s two drogue parachutes deploy first, at 25,000 feet (7,600 meters), and within
a minute slow Orion to about 100 mph (160 kph) before being released. They are followed by three pilot parachutes
that pull out the three main parachutes which will slow Orion’s descent to less than 20 mph (32 kph). The spacecraft
will make a precise landing within eyesight of the recovery ship off the coast of San Diego.

Artemis I Press Kit Back to Table of Contents 6

Recovery Operations

The Landing and Recovery Team, led by NASA’s Exploration Ground Systems program at Kennedy, will be
responsible for safely recovering the capsule after splashdown. The interagency landing and recovery team consists
of personnel and assets from the U.S. Department of Defense, including Navy amphibious specialists and Air
Force weather specialists, and engineers and technicians from Kennedy, Johnson Space Center in Houston, and
Lockheed Martin Space Operations.

Before splashdown, the team will head out to sea in a Navy ship. At the direction of the NASA Recovery Director,
Navy divers and other team members in several inflatable boats will be cleared to approach Orion. Divers will then
attach a cable to the spacecraft and pull it by winch into a specially designed cradle inside the ship’s well deck.
The vessel will transport the spacecraft and other hardware to a pier at U.S. Naval Base San Diego for transport to
Kennedy.

Open water personnel will also work to recover Orion’s forward bay cover and three main parachutes. If teams
are able to recover the jettisoned cover and parachutes, engineers will inspect the hardware and gather additional
performance data.

Artemis I Press Kit Back to Table of Contents 7

Major Mission Milestones

Perigee Raise Maneuver – ICPS burn to raise Orion’s altitude at the point in the orbit where the
spacecraft is nearest the Earth, known as its perigee, to ensure the spacecraft does not reenter the
Earth’s atmosphere

Trans-lunar Injection Burn – ICPS burn to increase Orion’s speed from 17,500 mph to 22,600 mph
to escape the pull of Earth’s gravity for a precise trajectory to the Moon

Outbound Powered Fly-by Burn – service module burn to send Orion close enough to the lunar
surface to leverage the Moon’s gravitational force and direct the spacecraft toward entry into a lunar
distant retrograde orbit

Distant Retrograde Orbit Entry Burn – service module burn to enter lunar orbit and stabilize the
spacecraft in the distant retrograde orbit

Distant Retrograde Orbit Exit Burn – service module burn to exit lunar orbit and direct Orion to a
second close lunar flyby

Artemis I Press Kit Back to Table of Contents 8

Return Powered Fly-by Burn – service module burn to send Orion close enough to the lunar sur-
face for a gravity assist from the Moon to slingshot Orion on a trajectory back to intercept the Earth’s
atmosphere in preparation for reentry

Entry and splashdown – the service module will separate from Orion just before re-entry, and the
reaction control system engines will orient the crew module’s heatshield into the direction of travel to
prepare for peak heating followed by a parachute assisted splashdown in the ocean

Passes Apollo 13 distance record – 248,654 miles (400,170 kilometers)

Max distance from Earth – approximately 280,000 miles (450,000 kilometers)

Artemis I Press Kit Back to Table of Contents 9

Mission Objectives

The primary objectives of the Artemis I flight test are to demonstrate the Orion heat shield at lunar return re-entry
conditions, demonstrate operations and facilities during all mission phases, and retrieve the spacecraft after splashdown.
In the course of completing these goals, the team aims to successfully demonstrate the SLS rocket’s capability, carry
out the mission as planned, and ensure a safe return prior to the first flight with crew on Artemis II. Additional secondary
objectives will be accomplished as possible throughout the mission that may support future development or mission
planning efforts. These objectives will enable NASA to evaluate the performance of Orion, SLS, and the supporting
ground systems for certification of the respective systems that will support future crewed missions.

1. Demonstrate Orion’s heat shield can withstand the high speed and high heat
conditions when returning through Earth’s atmosphere from lunar velocities
When Orion returns from the Moon, it will be traveling nearly 25,000 mph (40,000 kph) and experience temperatures
up to 5,000 degrees Fahrenheit (2,800 degrees Celsius) as it enters Earth’s atmosphere, much faster and hotter than
a return from low-Earth orbit. While the heat shield has undergone extensive testing on Earth and was demonstrated
on Exploration Flight Test-1 in 2014, no aerodynamic or aerothermal test facility can recreate the conditions the heat
shield will experience returning at lunar return speeds. Validating heat shield performance is required before crews
fly in Orion.

2. Demonstrate operations and facilities during all mission phases

From launch countdown through recovery of Orion from the Pacific Ocean at the end of its mission, Artemis I
provides an opportunity to test many aspects of NASA’s launch facilities and ground-based infrastructure, SLS
operations including separation events during ascent, Orion operations in space, and recovery procedures. During
the flight, engineers will verify systems such as the spacecraft’s communications, propulsion, and navigation

Artemis I Press Kit Back to Table of Contents 10

systems. Operating Orion in space will give engineers further confidence the spacecraft can tolerate the extreme
thermal environment of deep space and successfully pass through the Van Allen Radiation Belt, that Orion’s main
engine and solar array wings work as designed, and the flight operations teams can successfully manage and
execute the mission, as well as demonstrate the performance of support systems for NASA facilities needed during
the flight.

3. Retrieve Orion after splashdown

While engineers will receive data throughout the flight, retrieving the crew module after splashdown will provide
information to engineers to inform future missions. Once returned to Kennedy after the mission, technicians will
conduct detailed inspections of Orion, retrieve data recorded on board during the flight, reuse components such
as avionics systems, and retrieve information from payloads. It will also allow NASA to demonstrate its recovery
techniques and procedures, which are critical to the safe return of future crews.

4. Accomplish additional flight test objectives

A number of additional objectives will demonstrate other capabilities and aspects of the rocket, spacecraft, integrated
systems, and recovery plans. Some of these flight test objectives include certifying Orion’s optical navigation system,
deploying the 10 CubeSats riding inside the Orion stage adapter, operating the technology and biology payloads
onboard Orion, and collecting imagery throughout the mission.

Artemis I Press Kit Back to Table of Contents 11

Countdown Timeline

Before the Artemis I mission launches on its way around the Moon, the launch team at Kennedy and supporting
teams across the country will begin the launch countdown about two days before liftoff.

The launch countdown contains “L Minus” and “T Minus” times. “L minus” indicates how far away liftoff is in hours
and minutes and does not include built-in holds. “T minus” time is a sequence of events that are built into the launch
countdown where counting and holds are inserted.

Pauses in the countdown, or “holds,” are built into the countdown to allow the launch team to target a precise launch
window, and to provide a cushion of time for certain tasks and procedures without impacting the overall schedule.
For the Artemis I countdown, planned built-in holds vary in length and occur at the following times: L-8 hours 40
minutes, and L-40 minutes.

These key events will take place during the countdown.

L-46 hours 40 minutes and counting
• The launch team arrives on their stations and the countdown begins (L-46, 40 minutes hours)
• Fill the water tank for the sound suppression system (L-46H – L-41H)
• Liquid Oxygen (LOX)/Liquid Hydrogen (LH2) System Preparations for Vehicle Loading (L-46H – L-37H)
• The Orion spacecraft is powered up if not already powered at Call to Stations (CTS)
(L-42H – L-41H30M)
• The interim cryogenic propulsion stage (ICPS) is Powered-up (L-38H30M – L-35H30M)
• The core stage is powered up (L-34H – L-33H20M))
• Final preparations of the four RS-25 engines (L-36H20M – L-31H)

L-32 hours and counting

• Core stage composite overwrapped pressure vessel (COPV) Pressurization to Flight Pressure
(L-31M – L-22H)
• Charge Orion Flight Batteries to 100% (L-30H – L-26H)
• Charge core stage Flight Batteries (L-27H – L-21H)
• The ICPS is Powered-up for launch (L-18H30M – L-15H30M)

L-15 hours and counting

• All non-essential personnel leave Launch Complex 39B (L-12H – L-10H)
• Ground Launch Sequencer (GLS) Activation (L-11H15M – 9H15M)
• Air-to-gaseous nitrogen (GN2) Changeover for vehicle cavity inerting (L-10H45M – Launch)

Artemis I Press Kit Back to Table of Contents 12

L-9 hours 40 minutes and counting
• Built in countdown hold begins (L-9H40M – L-7H10M)
• Launch team conducts a weather and tanking briefing (L-9H40M – L-8H50M)
• Launch team decides if they are “go” or “no-go” to begin tanking the rocket (L-8H40M)
• Core Stage LOX transfer line chilldown (L-8H15M – L-8H)

L-8 hours and counting

• Core stage LOX main propulsion system (MPS) chilldown (L-8H – L-7H20M)
• Core stage LOX slow fill (L-7H20M – L-7H5M)
• Core Stage LOX fast fill (L-7H5M – L-4H15M)
• Core Stage LH2 chilldown (L-7H15M – L-7H5M)
• Core Stage LH2 slow fill start (L-7H5M – L-6H15M)
• Core Stage LH2 fast fill (L-6H15M – L-5H5M)
• Core Stage LH2 topping (L-5H5M – L-5H)
• Engine bleed kick start” (L-6H15M)

L-5 hours and counting

• Core Stage LH2 replenish (L-5H – Launch)
• ICPS LH2 ground support equipment (GSE) and tank chilldown (L-4H45M – L-4H30M)
• ICPS LH2 fast fill start (L-4H30M – L-3H30M)
• Orion communications system activated (RF to Mission Control) (L-4H20M – L-3H45M)
• Core stage LOX topping (L-4H15M– L-3H55M)
• Core Stage LOX replenish (L-3H55M – Launch)
• ICPS LOX MPS chilldown (L-3H55M– L-3H45M)
• ICPS LOX fast fill (L-3H45M– L-2H55M)
• ICPS LH2 validation and leak test (L-3H30M – L-3H15M)
• ICPS LH2 tank topping start (L-3H15M – L-2H55M)

L-3 hours and counting

• ICPS/Space Launch System (SLS) telemetry data verified with Mission Control and SLS
Engineering Support Center (L-2H55M – L-2H45M)
• ICPS LOX validation and leak test (L-2H55M – L-2H30M)
• ICPS LH2 replenish (L-2H50M – Launch)
• ICPS LOX topping (L-2H30M – L-2H10M)
• ICPS LOX replenish (L-2H10M – Launch)

L-50 minutes and counting

• Final NASA Test Director briefing is held (L-50M)

L-40 minutes and counting

• Built in 30-minute countdown hold begins (L-40M)

L-15 minutes and counting

• The launch director polls the team to ensure they are “go” for launch

Artemis I Press Kit Back to Table of Contents 13

T-10 minutes and counting
• Ground Launch Sequencer (GLS) initiates terminal count (T-10M)
• GLS go for core stage tank pressurization (T-6M)
• Orion ascent pyros are armed (T-6M) 
• Orion set to internal power (T-6M) 
• Core Stage LH2 terminate replenish (T-5M57S) 
• CS LH2 tank pre-pressurization (T-5M36S)
• GLS is go for FTS arm (T-5M)
• GLS is go for LH2 high flow bleed check (T-4M40S)
• GLS is go for core stage auxiliary power unit (APU) start (T-4M)
• Core Stage APU starts (T-4M)
• Core stage L0X terminate replenish (T-4M)  
• ICPS LOX terminate replenish (T-3M30S) 
• GLS is go for purge sequence 4 (T-3M10S)
• CS LOX Tank Pre-pressurization (T-2M50S)
• ICPS switches to internal battery power (T-1M56S) 
• Core stage switches to internal power (T-1M30S) 
• ICPS enters terminal countdown mode (T-1M20S) 
• ICPS LH2 terminate replenish (T-50S) 
• GLS sends “Go for automated launch sequencer” command (T-33S) 
• Core stage flight computer to automated launching sequencer (T-30S) 
• Hydrogen burn off igniters initiated (T-12S) 
• GLS sends the command for core stage engine start (T-10S) 
• RS-25 engines startup (T-6.36S)

T-0
• Booster ignition, umbilical separation, and liftoff

Inside the terminal countdown, teams have a few options to hold the count if needed.
• The launch team can hold at 6 minutes for the duration of the launch window, less the 6 minutes
needed to launch, without having to recycle back to 10 minutes.
• If teams need to stop the clock between T-6 minutes and T-1 minute, 30 seconds, they can hold
for up to 3 minutes and resume the clock to launch. If they require more than 3 minutes of hold
time, the countdown would recycle back to T-10.
• If the clock stops after T-1 minute and 30 seconds, but before the automated launch sequencer
takes over, then teams can recycle back to T-10 to try again, provided there is adequate launch
window remaining.
• After handover to the automated launch sequencer, any issue that would stop the countdown
would lead to concluding the launch attempt for that day.

Artemis I Press Kit Back to Table of Contents 14

Ascent and Mission Timeline

Times below are based on a launch at Nov. 14 at 12:07 a.m Eastern. The timing of events may change if launch
occurs at a time other than the opening of the launch window. All times Eastern.

Flight Day 1

12:07 a.m. – Liftoff

12:09:12 a.m. – Solid Rocket Booster separation (Mission Elapsed Time 00:02:12)

12:10:11 a.m. – Service module fairing jettison (MET 00:03:11)

12:10:16 a.m. – Launch abort system jettison (MET 00:03:16)

12:15:03 a.m. – Core stage main engine cutoff commanded (MET 00:08:03)

Artemis I Press Kit Back to Table of Contents 15

12:15:15 a.m. – Core Stage/ICPS separation (MET 00:08:15)

12:25:09 a.m. – Orion Solar Array Wing Deploy Begins (MET 00:18:09)
• Approximately 12 minutes in duration

1:00:58 a.m. – Perigee Raise Maneuver (MET 00:53:58)

• 22 seconds in duration

1:32:53 a.m. – Trans-lunar injection (MET 01:25:53)

• Approximately 18 minute burn

2:01:09 a.m. – Orion/ICPS separation (MET 01:54:09)

1:33:06 p.m. – Upper Stage Separation Burn (MET 01:56:06)

2:02:31 a.m. – ICPS Disposal Burn (MET 03:18:09)

7:51:04 a.m. – Outbound Trajectory Correction-1 burn (MET 07:44:04)

• First service module burn

Flight Day 2-5 – Outbound transit

Flight day 6-9 – Transit to Distant Retrograde Orbit (DRO) around the Moon
• Flight Day 6 (11/19): Outbound Powered Fly-by (burn 7:56 a.m.), Lunar Closest
Approach (~60 miles)

Flight Day 10-15 – In DRO

• Flight Day 10 (11/23): DRO Insertion (burn 5:51 p.m.)
• Flight Day 11 (11/24): Orion passes Apollo 13 Record

Flight Day 16-19 – Exit DRO

• Flight Day 16 (11/29): DRO Departure (burn 5:52 p.m.)

Flight Day 20-26 – Return transit

• Flight Day 20 (12/3): Return Flyby (burn 11:26 a.m.), Second Closest Approach

Flight Day 26 – Earth Return

• Flight Day 26 (12/9): Splashdown (11:28 a.m.)

Artemis I Press Kit Back to Table of Contents 16

Weather Criteria

The weather guidelines for Artemis I identify each condition that must be met to safely roll out to the pad and launch.

These guidelines include criteria for various meteorological conditions. Weather teams refer to these criteria while
monitoring the elements and implement constraints when conditions could affect rollout or liftoff.

If other potential weather hazards exist beyond those in the guidelines, the launch weather team will report the hazardous
condition to the launch director, who will determine whether launching would expose Artemis I to a weather hazard.

Basic Weather Criteria for Roll to the Pad

Do not roll to launch pad if the lightning forecast is greater than 10% within 20 nautical miles of the
launch area during rollout.

Do not roll to launch pad if there is greater than a 5% chance of hail forecast in the launch area
during rollout.

Do not roll to launch pad if the peak winds exceed 40 knots in the launch area during rollout.

Do not roll to launch pad if temperature is less than 40 degrees Fahrenheit or exceeds 95 degrees
Fahrenheit at the launch area during rollout.

Basic Weather Launch Criteria at the Pad for Liftoff

Temperature
Do not initiate tanking if the 24-hour average temperature at both 132.5 feet and 257.5 feet is
less than 41.4 degrees Fahrenheit.
Do not launch if the temperature at both 132.5 feet and 257.5 feet exceeds 94.5 degrees Fahrenheit
for 30 consecutive minutes.

Do not launch if the temperature at both 132.5 feet and 257.5 feet drops below a defined
temperature constraint for 30 consecutive minutes. The temperature constraints range from 38
degrees Fahrenheit to 49 degrees Fahrenheit, depending upon the wind and relative humidity. Higher
wind and relative humidity result in a colder temperature constraint.

Artemis I Press Kit Back to Table of Contents 17

Wind
Do not launch if the peak liftoff winds exceed a range of 29 knots through 39 knots between
132.5 feet and 457.5 feet, respectively.
Do not launch through upper-level wind conditions that could lead to control problems for the
launch vehicle.

Precipitation
Do not launch through precipitation.

Lightning
Do not initiate tanking of the core stage or interim cryogenic propulsion stage (ICPS) if the lightning
forecast is greater than 20% within 5 nautical miles of the launch area during tanking.

Do not launch for 30 minutes after lightning is observed within 10 nautical miles of the flight
path, unless specified conditions related to cloud distance and surface electrical fields can be
met.

Do not launch if the flight path is within 10 nautical miles of the edge of a thunderstorm that is
producing lightning until 30 minutes after the last lightning discharge is observed.

Do not launch if the flight path is within 10 nautical miles of an attached thunderstorm anvil cloud
unless temperature, time since last lightning, and distance criteria can be met, and if within 3 nautical
miles, maximum radar reflectivity criteria also are satisfied.

Do not launch if the flight path is within 10 nautical miles of a detached thunderstorm anvil cloud
unless temperature, time since lightning and/or detachment, and distance criteria can be met, and if
within 3 nautical miles, maximum radar reflectivity criteria also are satisfied.

Clouds
Do not launch if the flight path is within 3 nautical miles of a thunderstorm debris cloud for 3
hours, unless temperature, surface electric field, and radar reflectivity criteria can be met.

Do not launch if the flight path is within 5 nautical miles of disturbed weather clouds that extend into
freezing temperatures and contain moderate or greater precipitation.

Do not launch through a cloud layer that is within 5 nautical miles, greater than 4,500 feet thick,
and extends into freezing temperatures, unless specific criteria related to radar reflectivity and cloud
altitude can be met.

Artemis I Press Kit Back to Table of Contents 18

Do not launch if the flight path is within 10 nautical miles of cumulus clouds with certain distance
and height criteria. There are additional caveats that could be met for clouds not reaching 23 degrees
Fahrenheit.

Do not launch through cumulus clouds formed as the result of or directly attached to a smoke
plume, unless more than 60 minutes passed since detachment from the smoke plume.

Do not launch for 15 minutes if field mill instrument readings within 5 nautical miles of the launch
pad equal or exceed +/- 1,500 volts per meter, or +/- 1,000 volts per meter, unless specific caveats
related to clouds within 10 nautical miles of the flight path can be met.

Solar Activity
Do not launch during active solar activity resulting in increased density of solar energetic
particles.

Artemis I Press Kit Back to Table of Contents 19

What’s On Board

Artemis I will carry several payloads aboard SLS and Orion, including a number of technology demonstrations and
science investigations, as well as mementos to be returned to Earth in Orion.

CubeSats
Small, low-cost science and technology experiments called CubeSats will
deploy into deep space from the Orion stage adapter attached to the ICPS.
These CubeSats are not much larger than a shoe box, weigh about 25
pounds (11 kilograms) each, and contain science and technology that may
help pave the way for future human exploration in deep space. International
space agency partners and universities are involved with several of the
CubeSats.

Artemis I CubeSats are listed below with their provider, area of exploration:

Moon
Lunar IceCube – Morehead State University, Morehead, Kentucky
Searching for water in all forms and other volatiles with an infrared spectrometer

LunaH-Map – Arizona State University, Tempe, Arizona

Creating higher-fidelity maps of near-surface hydrogen in craters and other permanently shadowed
regions of the lunar South Pole with neutron spectrometers

LunIR – Lockheed Martin, Denver, Colorado

Performing advanced infrared imaging of the lunar surface

OMOTENASHI – JAXA, Japan

Developing the world’s smallest lunar lander and studying the lunar environment

Radiation
CuSP – Southwest Research Institute, San Antonio, Texas
Measuring particles and magnetic fields as a space weather station

BioSentinel – Ames Research Center, Silicon Valley, California

Using single-celled yeast to detect, measure and compare the impact of deep-space radiation on
living organisms over a long period of time

EQUULEUS – University of Tokyo/JAXA, Japan

Imaging the Earth’s plasmasphere for a better understanding of Earth’s radiation environment from
Earth-Moon LaGrange 2 point

Artemis I Press Kit Back to Table of Contents 20

Asteroid
NEA Scout – Marshall Space Flight Center, Huntsville, Alabama
Traveling by solar sail to a near-Earth asteroid and taking pictures and other characterizations of its
surface

Technology Demonstrations
ArgoMoon – Italian Space Agency (ASI)
Observing the interim cryogenic propulsion stage with advanced optics and software imaging system

Team Miles – Tampa, Florida

Demonstrating propulsion using plasma thrusters and competing in NASA’s Deep Space Derby

Purposeful Passengers
Three “passengers” will fly aboard Orion to test the spacecraft’s systems and collect data to inform future missions
with astronauts.

Commander Moonikin Campos

A suited manikin named Commander Moonikin Campos during a public
contest will occupy the commander’s seat inside Orion to provide data on
what crew members may experience in flight.

The manikin’s seat will be outfitted with two sensors – one under the
headrest and another behind the seat – to record acceleration and vibration
throughout the mission. Five additional accelerometers inside Orion will
provide data to compare vibration and acceleration between the upper and
lower seats. The Orion Crew Survival System suit – a spacesuit astronauts
will wear during launch, entry, and other dynamic phases of their missions –
worn by the manikin will also be equipped with two radiation sensors.

Helga and Zohar

Two additional seats in Orion will be occupied by manikin torsos, called
phantoms, manufactured from materials that mimic human bones, soft
tissues, and organs of an adult female. Named Zohar and Helga, the torsos
will be fitted with more than 5,600 passive sensors and 34 active radiation
detectors to measure radiation exposure as part of the Matroshka AstroRad
Radiation Experiment (MARE), an international effort including the German
Aerospace Center, the Israel Space Agency, and NASA.

Zohar will wear a radiation protection vest, called AstroRad, while Helga will not. The study will provide valuable data on
radiation levels astronauts may encounter on lunar missions and evaluate the effectiveness of the protective vest that
could allow crew to exit the storm shelter and continue working on critical mission activities in spite of a solar storm.

Artemis I Press Kit Back to Table of Contents 21

Additional Radiation Sensors
In addition to the CubeSats aboard the SLS rocket and the manikins inside the spacecraft, Orion will carry several
additional instruments and investigations to study the radiation environment of deep space that is present for
missions to the Moon and beyond.

Radiation Area Monitor (RAM)

Radiation sensor technology aboard the spacecraft includes six Radiation Area Monitor (RAM) passive detectors
about the size of a matchbox that will record the total radiation dose during the mission. As passive instruments,
they require no source of power to collect radiation dose information and will be analyzed after the flight.

Hybrid Electronic Radiation Assessor (HERA)

Orion also will be equipped with a radiation detector named the Hybrid Electronic Radiation Assessor (HERA) that
will measure charged particles that pass through its sensors. As an active instrument attached to the spacecraft, it
will be connected to power and also can send its readings to Earth during the flight. On crewed missions, HERA will
be part of the spacecraft’s Caution and Warning System and will sound a warning in the case of a solar energetic
particle event, notifying the crew to take shelter. NASA is also testing a similar HERA unit aboard the International
Space Station.

ESA Active Dosimeters

Created and provided by ESA, five devices each about the size of a deck of cards will be mounted inside the cabin
and equipped with multiple sensors that cover a broad range of energies from ionizing radiation in space. Called
ESA Active Dosimeters, the devices will record data on the radiation environment inside the spacecraft in real time
with a timestamp to allow scientists to see radiation dose rates during various mission phases, as well as total
mission dose. Scientists tested a similar ESA active dosimeter on the space station.

Biology Investigations
Orion will also carry a payload called Biological Experiment-01 containing four space biology investigations. These
investigations will look at the effects of the deep space environment on the nutritional value of seeds, DNA repair of
fungi, adaptation of yeast, and gene expression of algae during the journey around the Moon. The experiments will
take place inside a container stored within Orion’s crew module for the duration of Artemis I and will be returned to
researchers for post-flight analyses after the spacecraft splashes down. The fundamental knowledge gained from
these investigations will help us learn how we can better thrive in deep space, for future missions to the Moon and
Mars.

Callisto
Callisto is a technology demonstration developed through a reimbursable space act agreement with Lockheed
Martin. Lockheed Martin has partnered with Amazon, and Cisco to bring the Alexa digital assistant and Webex video
collaboration aboard Orion’s first flight test in deep space.

Named after a mythological Greek goddess and one of Artemis’ hunting attendants, Callisto is meant to show how
commercial technology could assist future astronauts on deep space missions. The payload will demonstrate how
astronauts and flight controllers can use human-machine interface technology to make their jobs simpler, safer and
more efficient, and advance human exploration in deep space.

The industry-funded payload will be located on Orion’s center console and includes a tablet that will test Webex by
Cisco video conferencing software to transmit video and audio from the Mission Control Center at Johnson, and
custom-built hardware and software by Lockheed Martin and Amazon that will test Alexa, Amazon’s voice-based
virtual assistant, to respond to the transmitted audio.

Artemis I Press Kit Back to Table of Contents 22

Deep Space Exploration System

The Space Launch System rocket, Orion spacecraft, and ground systems at Kennedy Space Center in Florida are
critical to NASA’s exploration plans at the Moon and beyond. NASA designed the SLS as the world’s most powerful
rocket for safely sending humans on missions to deep space, and Orion is specifically designed to sustain humans
hundreds of thousands of miles from home. Exploration Ground Systems (EGS) at Kennedy has the infrastructure to
support the systems and facilities necessary to process and launch SLS and Orion. Together, SLS, Orion, and EGS are
designed to meet the evolving needs of our nation’s deep space exploration program for decades to come.

Orion
The Orion spacecraft is specifically designed to carry
astronauts to deep space and is currently the only
spacecraft capable of crewed deep space flight and
high-speed return from the vicinity of the Moon. Orion
is composed of three main elements and supporting
subsystems. The main elements are 1) the crew module,
where astronauts live and work; 2) the service module,
provided by ESA,which will provide power, propulsion,
and thermal control; and 3) the launch abort system,
which can pull the spacecraft and crew to safety in the
event of an emergency during launch or ascent to orbit.

On deep space missions, both distance and duration

dictate the capabilities and advanced technologies needed. Artemis I will test Orion’s navigation and communications
systems beyond the range of GPS and above communication satellites in Earth orbit; test the radiation sensors and
shielding outside the protection of Earth’s magnetic field; and test the world’s largest heat shield during a high-
speed return from the Moon, at nearly 25,000 mph and temperatures half as hot as the surface of the Sun.

Space Launch System (SLS)

NASA’s Space Launch System is the world’s most powerful rocket that provides the foundation for human exploration
beyond Earth’s orbit and is currently the only rocket that can safely send Orion directly to the Moon. The main
elements are 1) a central core stage that houses propellant tanks, engines, and avionics; 2) four liquid propellant RS-
25 engines powered by cryogenic, or supercold, liquid hydrogen and liquid oxygen; 3) two solid-fuel rocket boosters
that provide the majority of thrust and steering for the rocket during the first two minutes of flight; and 4) an upper
stage fueled by liquid hydrogen and liquid oxygen for in-space propulsion after separation from the core stage.

SLS is designed specifically for deep space missions with humans and will send the Orion spacecraft to the Moon,
which is nearly 1,000 times farther than where the International Space Station resides in low-Earth orbit. The rocket
will provide the power to help Orion reach a speed of 22,600 mph, to escape the pull of Earth’s gravity send the
spacecraft to the Moon.

Artemis I Press Kit Back to Table of Contents 23

Exploration Ground Systems
The role of the Exploration Ground Systems (EGS) Program is to develop and operate the systems and facilities
necessary to process, assemble, transport, and launch rockets and spacecraft at the NASA’s Kennedy Space
Center in Florida. For Artemis missions, EGS is focused on the equipment, management, and operations required
to safely connect the Orion spacecraft with the SLS rocket; move the rocket to the launch pad; successfully launch
it into space; and recover the spacecraft once it has splashed down.

The main elements at Launch Complex 39 consist of 1) the 52-story Vehicle Assembly Building (VAB) for final
assembly and testing of the rocket and spacecraft; 2) the mobile launcher that serves as the ground structure for
stacking the rocket and spacecraft inside the VAB and from which the rocket will launch on the pad; 3) the crawler-
transporter that will carry the rocket and spacecraft atop the mobile launcher along a crawlerway between the
VAB and the pad; 4) the Launch Control Center, which contains the firing rooms for commanding the launch; and
5) Launch Pad 39B with electrical power, a water system, a flame trench, and a safe launch area to support SLS
launches.

Artemis I Press Kit Back to Table of Contents 24

Space Communications and Navigation

Artemis I will demonstrate NASA’s comprehensive communications network services for journeys to lunar orbit.
The mission relies on NASA’s worldwide network infrastructure for seamless communications, providing different
service levels as Orion leaves Earth, orbits the Moon, and returns safely home.

For Artemis I, NASA’s Near Space Network and NASA’s Deep Space Network will be used to support communication
and navigation services. Communication services allow flight controllers to send commands to the spacecraft and
receive data from Orion, the Space Launch System, and the rocket’s upper stage. Navigation, or tracking, services
enable the flight controllers to calculate where the spacecraft are along their trajectory through space.

NASA’s Near Space Network

NASA’s Near Space Network provides a suite of communications and navigation services through commercial and
government-owned, contractor-operated network infrastructure. The network will provide communications and navigation
services during launch and navigation services at various points on the journey to the Moon. Additionally, as Orion
journeys back to Earth, the Near Space Network will provide communications and navigation services.

The Near Space Network’s Launch Communications Segment will provide links to both Orion and SLS during prelaunch
and launch for Artemis I. NASA’s constellation of Tracking and Data Relay Satellites (TDRS), will provide near-continuous
communications services during launch and low-Earth orbit phases of the Artemis I mission. TDRS will continue service
until Orion and ICPS leave its coverage volume, when NASA’s Deep Space Network takes over, and then provide service
again on Orion’s return to Earth, from the final return trajectory correction burn through splashdown.

Artemis I Press Kit Back to Table of Contents 25

NASA’s Deep Space Network
The Deep Space Network will handle communications beyond low-Earth orbit. Additionally, the network will facilitate
communications during the CubeSat deployments that will fly as secondary payloads on Artemis I with their own
science and technology missions. The Near Space Network and Deep Space Network will work together to support
navigation for Orion so that engineers can employ a technique called three-way Doppler tracking. With two ground
stations on Earth in contact with Orion simultaneously – one from each network – NASA can triangulate Orion’s
location relative to the ground stations.

Artemis I Press Kit Back to Table of Contents 26

Flight Facilities

Launch Control Center

The Launch Control Center (LCC) at NASA’s Kennedy Space
Center in Florida is where launch operations personnel will
operate, monitor, and coordinate the launch of the SLS rocket
and Orion spacecraft.
The LCC links the launch team operators inside Firing Room
1 to the SLS rocket and Orion spacecraft in processing areas
such as the Vehicle Assembly Building, mobile launcher, and
at Launch Complex 39B. Controllers at Kennedy are also able
to communicate with controllers at the Space Launch Delta 45
Eastern Range and other NASA control centers from the LCC.

Mission Control Center

NASA’s Christopher C. Kraft Jr. Mission Control Center (MCC) at
the Johnson Space Center in Houston is the facility from which
flight operations personnel will remotely monitor and operate the
Orion spacecraft and receive data from Orion and SLS.
MCC is comprised of several flight control rooms (FCR), including
FCR-1, FCR-2 (the historic Apollo Flight Control Room) and the
Red, White, and Blue FCRs. The White FCR was transformed from
its shuttle legacy configuration into a modern mission control
configuration known as the MCC-21 effort and is ultimately
intended to serve as the mission control fo r flights of NASA’s
Orion spacecraft on missions to deep space destinations.

SLS Engineering Support Center

The SLS Engineering Support Center is located in the Huntsville
Operations Support Center at NASA’s Marshall Space Flight
Center and allows engineers specializing in the engines, boosters,
core stage, avionics, and upper stage to monitor the rocket’s
propulsion and other systems during the countdown and flight.
The teams in the support center provide technical expertise to
the launch operations team located in the LCC and the flight
operations team located in the MCC. Support center teams
also will provide help to solve challenges during the launch
countdown and flight and produce flash reports and archive data
for additional study in the weeks and months after launch.

Artemis I Press Kit Back to Table of Contents 27

Mission Personnel & Management

The primary teams responsible for supporting the mission include the mission management team, the launch
control team, the flight control team, and the landing and recovery team. Throughout the mission, the mission
management team is responsible for reviewing mission status and risk assessments for issues that arise and
making relevant decisions. The launch control, flight control, and landing and recovery teams are responsible for
operations throughout the mission phases. Additional support teams also provide technical expertise to the mission
management team and each of the operations teams throughout the mission.

Mission Manager: Mike Sarafin

Mike Sarafin is the Artemis mission manager at NASA Headquarters
in Washington. In this role, he leads the Mission Management Team
for Artemis I, providing oversight and responsibility for critical
decisions across all flight phases (launch, in-space, and recovery),
with support from team members and advisors with technical
expertise in various areas. Prior to flight he acts as a senior technical
leader that integrates mission requirements, mission planning,
operations and flight readiness leading to mission execution.

Launch Director: Charlie Blackwell-Thompson

Charlie Blackwell-Thompson is the Artemis I launch director at
NASA’s Kennedy Space Center in Florida, overseeing the countdown
and liftoff of SLS and Orion. Named to the position in January 2016,
Blackwell-Thompson is NASA’s first female launch director. Her role
includes leading and managing the launch operations planning and
execution for the Exploration Ground Systems Program. She also
serves as the cross-program lead to the Launch Integration team
responsible for integration and coordination of launch operations
across the three programs: SLS, Orion and EGS. In her role as launch
director, she manages the development of all launch countdown
plans, philosophy, and launch and scrub turnaround procedures
and schedules, as well as training approaches.

Artemis I Press Kit Back to Table of Contents 28

 Lead Flight Director: Rick LaBrode
Rick LaBrode is the Artemis I lead flight director at NASA’s Johnson
Space Center in Houston. In this role he is responsible for guiding
the flight control team in Mission Control to execute the mission
objectives of the Orion spacecraft. LaBrode coordinates with teams
to plan the mission design and strategy, develops procedures and
flight rules on how to operate the spacecraft, and is responsible
for the overall success of the mission, beginning with the Space
Launch System rocket firing from space to propel Orion toward the
Moon, through its trek back to Earth. As a flight director, LaBrode is
involved in critical decision-making when needed and oversees the
flight controllers who use real-time telemetry to track and monitor
technical and safety aspects during the mission.

Ascent and Entry Flight Director: Judd Frieling

Judd Frieling serves as the Artemis I ascent and entry flight director at
Johnson. Frieling is responsible for two phases of flight: launch of the
Orion spacecraft atop the Space Launch System (SLS) rocket as they
clear the launch pad and climb toward the Moon, and Orion’s return
from the lunar vicinity as it enters Earth’s atmosphere and splashes
down in the ocean. From the Mission Control Center, Frieling oversees
the flight control team – who have real-time command and control
capability of the spacecraft – monitoring the launch performance of
Orion and the SLS engines and its boosters, as well as the propulsions
stages as the rocket clears the launch pad. During re-entry, the team
tracks Orion as it speeds through Earth’s atmosphere and descends
during a parachute-controlled splashdown of the crew module in the
Pacific Ocean.

Recovery Director: Melissa Jones

Melissa Jones is the Artemis I landing and recovery director for
the Exploration Ground Systems program at Kennedy. Jones is
responsible for leading NASA’s efforts for nominal and contingency
retrieval of flight crew and crew module hardware worldwide. In this
position, she also will lead the Recovery Team that will partner with
the U.S. Navy to recover the Orion crew module from the Pacific
Ocean.

Artemis I Press Kit Back to Table of Contents 29

 NASA Orion Program Manager: Howard Hu
Howard Hu is manager of the Orion program at Johnson. As
Orion program manager, he is responsible for oversight of design,
development, production, and operations of the Orion spacecraft
that will carry humans farther into space than ever before.

NASA Space Launch System Program Manager:

John Honeycutt
John Honeycutt is manager of the SLS program at Marshall.
He is responsible for directing SLS program activities leading
to development of America’s deep-space rocket for human and
scientific exploration.

NASA Exploration Ground Systems Program Manager:

Mike Bolger
Mike Bolger is manager of the EGS program at Kennedy. He is
responsible for leading the government and contractor team that
is preparing the ground systems, infrastructure, facilities, and
processes required to support NASA’s next-generation space
launch systems and spacecraft.

Artemis I Press Kit Back to Table of Contents 30

 Associate Administrator of the Exploration Systems
Development Mission Directorate: James Free
James Free is associate administrator of the Exploration
Systems Development Mission Directorate at NASA
Headquarters. As associate administrator, he provides
leadership and management of human spaceflight systems
development for programs critical to Artemis and NASA’s Moon
and Mars exploration goals.

Deputy Associate Administrator of the Exploration Systems

Development Mission Directorate: Cathy Koerner
Cathy Koerner is deputy associate administrator of the
Exploration Systems Development Mission Directorate at NASA
Headquarters. In this role, she is responsible for establishing
and defining future space exploration architectures while
overseeing development of new space transportation systems
and supporting capabilities that are critical for human-led deep
space exploration and scientific research.

Deputy Associate Administrator for Common Exploration

Systems Development Division: Tom Whitmeyer
Tom Whitmeyer is the deputy associate administrator for the
mission directorate’s Common Exploration Systems division. In
his role, Whitmeyer provides executive leadership and program
integration of SLS, Orion, and EGS programs, and the overall
systems integration, program planning and control, and mission
operations of the enterprise.

Artemis I Press Kit Back to Table of Contents 31

Lead Contractors and Suppliers

Men and women across America and in Europe are building the systems to support missions to the Moon, Mars,
and beyond. These missions are critical to the space economy, fueling new industries and technologies, supporting
job growth, and furthering the demand for a highly skilled workforce. Since its inception, every state in America has
contributed to the success of Artemis, with companies hard at work on innovations that will help establish a long-
duration human presence at the Moon.

Lead contractors for Orion, SLS, and EGS include:

• Lockheed Martin for Orion
• Aerojet Rocketdyne, Boeing, Northrop Grumman, and Teledyne Brown for the Space Launch System
• Jacobs for Exploration Ground Systems

These lead contractors currently have thousands of suppliers contributing to Orion, the SLS rocket, and the spaceport
at Kennedy from all 50 states. With NASA investments, additional U.S. companies, including small businesses, are
advancing technologies and systems needed for the Artemis program.

For more information and a map of Artemis partners, visit https://www.nasa.gov/content/artemis-partners

European Space Agency

In addition, workers in the U.S. and 10 European countries provide work on Orion’s European Service Module. The
European Service Module is ESA’s contribution to NASA’s Orion spacecraft. It provides electricity, water, oxygen
and nitrogen as well as keeping the spacecraft at the right temperature and on course. European countries include
Germany, Italy, Switzerland, France, Belgium, Sweden, Denmark, Norway, Spain, and The Netherlands. Airbus is the
lead contractor under ESA for the service module. The final product is assembled in Europe before being shipped
to Kennedy. International partnerships play a key role in achieving the agency’s goals, and establishing a safe,
peaceful, and prosperous future in space.
www.esa.int/orion

Lockheed Martin
Lockheed Martin is the lead contractor for the design,
development test and production of the Orion spacecraft.
As lead contractor for Orion, Lockheed Martin designed and
builds the spacecraft’s crew module – where astronauts will
fly ̶ the launch abort system, and crew module adapter. It also
integrates the European Service Module into a completed Orion
spacecraft. Lockheed Martin performs the majority of the Orion
engineering work in Denver, manufactures the crew module
pressure vessel and thermal protection materials at the Michoud
Assembly Facility in New Orleans, and completes final assembly
of the spacecraft in Florida at the Kennedy Space Center and
Spacecraft, Test, Assembly and Resource (STAR) Center.
https://www.lockheedmartin.com/en-us/products/orion.html

Artemis I Press Kit Back to Table of Contents 32

Aerojet Rocketdyne
Aerojet Rocketdyne is the lead contractor for the four RS-25 engines that will be used to propel SLS during its
8.5-minute climb to space and the RL10 engine that powers the rocket’s interim cryogenic propulsion stage.
Additionally, Aerojet Rocketdyne provides eight auxiliary engines and 12 reaction control thrusters for the Orion crew
module as well as the jettison motor for the launch abort system. The company also manufactures the high-pressure
helium tanks that inflate Orion’s flotation system for water-based landings.
https://www.rocket.com/space/artemis

Boeing
Boeing is the lead contractor for the design, development, test, and production of the SLS core stage and ICPS, as
well as development of the flight avionics suite. Boeing built and tested the core stage for the Artemis I mission. The
SLS core stage is the world’s tallest rocket stage. It will store cryogenic liquid hydrogen, liquid oxygen, and all the
systems that will feed the stage’s four RS-25 engines. It also houses the flight computers and other avionics needed
to control the rocket’s flight. The ICPS provides in-space propulsion after the solid rocket boosters and core stage
are jettisoned.
https://www.boeing.com/space/space-launch-system/launch/index.html

Northrop Grumman
Northrop Grumman is the lead contractor for the design, development, testing, and production of the twin solid
rocket boosters that provide nearly 80 percent of initial thrust for SLS. Additionally, Northrop Grumman provides 16
booster separation motors, designed to push the spent solid rocket boosters away from the core stage, for each
launch. Northrop Grumman also produces the launch abort motor and the attitude control motor for the Orion
spacecraft’s launch abort system.
https://www.northropgrumman.com/space/nasas-artemis-program/

Teledyne Brown Engineering

Teledyne Brown Engineering is the lead contractor for the launch vehicle stage adapter, providing engineering,
technical support, and hardware for the Artemis I adapter and structural test article. Teledyne Brown manufactures
the adapter using the friction stir welding tools in the Advanced Weld Facility at Marshall.
https://www.tbe.com/what-we-do/markets/space

Jacobs
Jacobs is the lead contractor for NASA’s Exploration Ground Systems Program at Kennedy. In this role, the Jacobs
team oversees launch operations and integrates Artemis spaceflight hardware at Kennedy. Working in multiple
facilities across Kennedy, Jacobs receives all of the hardware and conducts final processing, assembly, testing and
integration in preparation for launch. Jacobs has worked with NASA to develop the Artemis ground operations and
launch control software, and will be on consoles in the Launch Control Center firing room supporting the countdown
on launch day. The Jacobs team also supports the Orion recovery operations after splashdown.
https://www.jacobs.com/projects/artemis

Artemis I Press Kit Back to Table of Contents 33

 Airbus
Orion’s European Service Module is built by Airbus under a
contract with ESA. The service module will provide critical
functions such as the propulsion system to get to the Moon,
and astronaut life support systems such as water, oxygen, and
nitrogen. Many companies all over Europe, as well as companies
in the United States, supply components for the service module.
The final product is assembled in Europe before being shipped to
NASA. ESA has signed contracts with Airbus for the construction
of a total of six European Service Modules.
https://www.airbus.com/space/space-infrastructures/Orion-
ESM.html

Artemis I Press Kit Back to Table of Contents 34

Communications Contacts

Artemis Orion
NASA Headquarters NASA’s Johnson Space Center
Exploration Systems Development Mission Orion Public Affairs
Directorate Public Affairs Laura Rochon
Kathryn Hambleton  281-483-5111
202-358-1409 [email protected]
[email protected]
NASA’s Langley Research Center
Rachel Kraft Orion – Launch Abort System Public Affairs
Exploration Systems Development Kristyn Damadeo
Mission Directorate Public Affairs 757-864-1090
Rachel Kraft [email protected]
202-365-7575
[email protected] NASA’s Glenn Research Center
Orion - European Service Module Public Affairs
Social Media James “Jimi” Russell
Thalia Patrinos 216-433-2894
202-358-3887 [email protected]
[email protected]
Lockheed Martin
NASA’s Kennedy Space Center
Communications
Artemis Public Affairs Gary Napier
Tiffany Fairley 720-224-7955
321-867-7986 [email protected]
[email protected]
ESA - European Space Agency
NASA’s Johnson Space Center Communication Programme Office for Human
Artemis Public Affairs and Robotic Exploration
Gary Jordan Rosita Suenson
281-483-5111 +31 652 062 158
[email protected] [email protected]

Flight Operations Directorate Senior Editor

Astronaut Office Public Affairs Specialist Julien Harrod
Megan Dean +31 617 02 51 84
281-483-5111 [email protected]
[email protected]

Artemis I Press Kit Back to Table of Contents 35

Orion Continued Aerojet Rocketdyne

Media Relations SLS and Orion Media Relations

Ninja Mennings Mary Engola
[email protected] 571-289-1371
[email protected]
Airbus
Media Relations SLS Media Relations
Ralph Heinrich Todd McConnell
+49 171 304 9751 561-302-8358
[email protected] [email protected]

Space Launch System Boeing

NASA’s Marshall Space Flight Center Media Relations
Space Launch System Public Affairs Steve Siceloff
Tracy McMahan (281) 253-8089
256-682-5326 [email protected]
[email protected]
Media Relations
Space Launch System Public Affairs Josh Barrett
Ray Osorio 321-607-4118
256-267-2909 [email protected]
[email protected]
Northrop Grumman
Propulsion Systems/SLS & Launch Abort
Space Launch System Public Affairs
Kay Anderson
Corinne Edmiston
435-230-2787
256-975-6798
[email protected]
[email protected]

NASA’s Michoud Assembly Facility Propulsion Systems/SLS & Launch Abort

Scott Day
Strategic Communications
480-352-3798
Craig Betbeze
[email protected]
504-419-5333
[email protected]
Propulsion Systems/SLS & Launch Abort
Kendra Kastelan
NASA’s Stennis Space Center
385-232-0297
Office of Communications [email protected]
Lacy Thompson
228-688-3050
[email protected]

Artemis I Press Kit Back to Table of Contents 36

Space Launch System Continued Media Engagement Lead
Teledyne Brown Engineering Tracy Yates
321-750-1739
Director of Marketing, Communication and
[email protected]
Strategic Integration
Jessica Sanders
Media Relations
256-726-1385
Paige Easley
[email protected]
601-248-7762
[email protected]
United Launch Alliance
Senior Manager, Strategic Communications CubeSats
Julie Arnold NASA’s Marshall Space Flight Center
321-423-4594
Space Launch System
[email protected]
Tracy McMahan
Exploration Ground Systems 256-682-5326
[email protected]
NASA’s Kennedy Space Center
Space Launch System and Orion Space Launch System
Madison Tuttle Corinne Edmiston
321-861-0493 256-698-2638
[email protected] [email protected]

Vehicle Assembly Building/Launch Control Orion Payloads

Center/Spanish Language Lead Matroshka AstroRad Radiation Experiment
Antonia Jaramillo Botero (MARE)
321-501-8425
German Aerospace Center (DLR)
[email protected]
MARE Project Manager
Dr. Thomas Berger
Launch Pad 39B/ Mobile Launchers/Crawler-
+49 2203 601 31 35
Transporters
[email protected]
Tammy Long
321-427-3010 Israel Space Agency (ISA)
[email protected]
Director of International Relations
Jacobs Revital Karin Sela
[email protected]
Strategic Communications & Suppliers Lead
Katie Frakes StemRad, LTD
321-289-7863; 321-360-2781 CEO
[email protected] Dr. Oren Milstein
USA: 813-808-3038
Israel: +972-54-255-1495
[email protected]

Artemis I Press Kit Back to Table of Contents 37

Orion Payloads Continued
Callisto Technology Demonstration
Lockheed Martin
Communications
Gary Napier
303-971-4012; 720-224-7955
[email protected]

Manikin “Commander Moonikin Campos”

NASA’s Johnson Space Center
Orion Public Affairs
Laura Rochon
281-483-5111
[email protected]  

Bio-Experiment-1
NASA’s Kennedy Space Center
Public Affairs
Mary MacLaughlin
321-867-3155
[email protected]

Other
U.S. Navy
Public Affairs Officer, Expeditionary Strike Group 3
LCDR Lauren Spaziano
619-767-6833; 619-886-4293
[email protected]

Artemis I Press Kit Back to Table of Contents 38

Additional Multimedia Materials

Media Resources
Artemis: http://www.nasa.gov/artemis
Artemis I: https://www.nasa.gov/content/artemis-i-media-resources
Orion: https://www.nasa.gov/exploration/systems/orion/media-resources
Space Launch System: https://www.nasa.gov/exploration/systems/sls/resources.html
Exploration Ground Systems: https://www.nasa.gov/content/exploration-ground-sys-
tems-news-and-resources

Social Media Links

NASA
Twitter: https://www.twitter.com/NASA
Facebook: http://www.facebook.com/NASA
Instagram: http://www.instagram.com/NASA
YouTube: https://www.youtube.com/NASA
Tumblr: https://nasa.tumblr.com/

Artemis
Twitter: https://twitter.com/NASAArtemis
Facebook: https://www.facebook.com/NASAArtemis/
Instagram: https://instagram.com/nasaartemis

Orion
Twitter: http://twitter.com/NASA_Orion
Facebook: https://www.facebook.com/NASAOrion
Flickr: http://www.flickr.com/photos/nasaorion
Tumblr: https://nasaorion.tumblr.com/

Lockheed Martin
Twitter: https://twitter.com/lmspace
Facebook: https://www.facebook.com/lockheedmartin
Instagram: https://www.instagram.com/lockheedmartin
YouTube: http://www.youtube.com/user/LockheedMartinVideos

Artemis I Press Kit Back to Table of Contents 39

European Space Agency
Twitter: https://www.twitter.com/esa
Facebook: https://www.facebook.com/EuropeanSpaceAgency
Instagram: https://instagram.com/europeanspaceagency/
YouTube: https://www.youtube.com/user/ESA

Airbus
Twitter: https://www.twitter.com/AirbusSpace
Facebook: https://www.facebook.com/AirbusSpace/
Instagram: https://www.instagram.com/airbus_space
YouTube: https://www.youtube.com/user/airbusds

Space Launch System

Twitter: https://twitter.com/NASA_SLS
Facebook: https://www.facebook.com/NASASLS/
Flickr: https://flic.kr/s/aHsjw4fs4a

Aerojet Rocketdyne
Twitter: https://www.twitter.com/AerojetRdyne
Facebook: https://www.facebook.com/AerojetRdyne
Instagram: https://www.instagram.com/aerojet_rocketdyne
YouTube: https://www.youtube.com/user/AerojetRocketdyne

Boeing
Twitter: https://www.twitter.com/BoeingSpace
Facebook: https://www.facebook.com/Boeing/
Instagram: https://www.instagram.com/boeing
YouTube: https://www.youtube.com/user/boeing

Northrop Grumman
Twitter: https://www.twitter.com/northropgrumman
Facebook: https://www.facebook.com/NorthropGrumman
Instagram: https://www.instagram.com/NorthropGrumman
YouTube: https://www.youtube.com/user/northropgrummanmedia

Exploration Ground Systems

Twitter: https://twitter.com/NASAGroundSys
Facebook: https://www.facebook.com/NASAGroundSystems/
Flickr: https://flic.kr/s/aHsk6rHRz3

Artemis I Press Kit Back to Table of Contents 40

Jacobs
Twitter: https://twitter.com/JacobsConnects
Facebook: https://www.facebook.com/JacobsConnects
Linkedin: https://www.linkedin.com/company/jacobs/
Youtube: https://www.youtube.com/user/jacobsworldwide
Instagram: https://www.instagram.com/jacobsconnects/

Kennedy Space Center

Twitter: https://twitter.com/NASAKennedy
Facebook: https://www.facebook.com/NASAKennedy/
Instagram: https://www.instagram.com/nasakennedy/
Flickr: https://www.flickr.com/photos/nasakennedy/
YouTube: https://www.youtube.com/user/NASAKennedy

Johnson Space Center

Twitter: https://twitter.com/NASA_Johnson
Facebook: https://www.facebook.com/NASAJSC
Instagram: https://www.instagram.com/nasajohnson/
Flickr: https://www.flickr.com/photos/nasa2explore/
YouTube: https://www.youtube.com/user/ReelNASA

Marshall Space Flight Center

Twitter: https://www.twitter.com/NASA_Marshall
Facebook: https://www.facebook.com/nasamarshallcenter
Instagram: https://www.instagram.com/nasa_marshall
Flickr: https://www.flickr.com/photos/nasamarshall
YouTube: https://www.youtube.com/user/NASAMarshallTV

Artemis I Press Kit Back to Table of Contents 41