Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Rectangular Footing - Concrete Design

    Uploaded by

    Vincelord Cabaddu
    This document summarizes the design of a rectangular reinforced concrete footing. Key details include: - The footing is 2m by 2m supporting a column load of 1085 kN - Calculations check that the footing depth and width are adequate to support the load within allowable soil pressure and shear limits. - Reinforcement includes 27 longitudinal #16 bars and #16 stirrups spaced at 150mm. - Calculations verify development length and spacing of reinforcement meets design requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Rectangular Footing - Concrete Design

    Uploaded by

    Vincelord Cabaddu
    43 views6 pages
    This document summarizes the design of a rectangular reinforced concrete footing. Key details include: - The footing is 2m by 2m supporting a column load of 1085 kN - Calculations check that the footing depth and width are adequate to support the load within allowable soil pressure and shear limits. - Reinforcement includes 27 longitudinal #16 bars and #16 stirrups spaced at 150mm. - Calculations verify development length and spacing of reinforcement meets design requirements.

    Original Title

    Rectangular Footing_concrete Design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a rectangular reinforced concrete footing. Key details include: - The footing is 2m by 2m supporting a column load of 1085 kN - Calculations check that the footing depth and width are adequate to support the load within allowable soil pressure and shear limits. - Reinforcement includes 27 longitudinal #16 bars and #16 stirrups spaced at 150mm. - Calculations verify development length and spacing of reinforcement meets design requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    43 views6 pages

    Rectangular Footing - Concrete Design

    Uploaded by

    Vincelord Cabaddu
    This document summarizes the design of a rectangular reinforced concrete footing. Key details include: - The footing is 2m by 2m supporting a column load of 1085 kN - Calculations check that the footing depth and width are adequate to support the load within allowable soil pressure and shear limits. - Reinforcement includes 27 longitudinal #16 bars and #16 stirrups spaced at 150mm. - Calculations verify development length and spacing of reinforcement meets design requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 6

    Name of Project: hhghh General Notes:

    Job No.: hhghh gkg


    Client: yyy uyuu
    Designed by: uuu hgh
    Date: tyyuy
    Sheet: 2 Of 2
    Jerv Works Const. Ref: Reinforced Concrete Design, pg.416 by: Besavilla
    *Input data in green cells

    Footing, rectangular

    footing no. ghh

    specification
    fc' 21 MPa
    fy 275 MPa
    wt. of concrete 20 kN/m3
    earth unit weight 15.7 kN/m3
    q, allowable soil pressure 250 kPa

    service load
    service Dead load 689 kN
    service Live load 255.98 kN

    overburden 1.5 m

    column
    h, along footing long direction 300 mm
    b, along footing short direction 200 mm

    footing N.G. - increase footing width


    B , least side 2 m.
    assume side L 2 m > = 2.17 OK - soil pressure
    assume footing h (min. .20m) 0.6 m. OK - footing depth but may lessen by 32.04%
    concrete cover 70 mm

    R-bars to use
    Phils. Standard Reinforcing Bars

    r-bar
    footing reinforcement
    16mm
    Results:
    r-bar no. OK - soil pressure
    column dowels
    16mm 4 min. 4 OK - 2-way shear
    OK - beam shear
    OK - ld at long direction
    OK - no. of column dowels
    use ld min 200 mm into both column and footing
    0 m. 2 m. 0 m.

    300 mm

    2m 200 mm
    27 - 16mm longitudinal bars

    27 - 16mm 0 - 16mm
    transverse bars at center transverse bars at outer
    strip strip

    long direction

    27 - 16mm longitudinal bars

    0 - 16mm 27 - 16mm 0 - 16mm


    transverse bars at outer transverse bars at center transverse bars at outer
    strip strip strip

    short direction

    27 - 16mm longitudinal bars 1.5 m overburden

    0.6 m

    2m
    solution

    wt. of assume footing 48 kN


    wt. of overburden 92.787 kN
    total load = wt. of footing +overburden+ column load 1085.767 kN
    required footing area = total load / q 4.343068 m2
    required footing L = 2.17 m
    actual footing L 2 m
    actual footing area 4 m2
    Pu = 1.4(DL+overburden) + 1.7LL 1529.668 kN
    qu, actual upward soil pressure = Pu/actual foot. area 382.417 kPa

    qa ,allowable value of soil pressure = q* Pu /(DL + LL) 404.6826 kPa >>== 382.417
    OK - soil pressure

    check d by punching shear


    actual d = 522 mm
    min c = 200 mm

    d/2 c d/2

    actual punching shear, vn = Vu/Фbod


    actual Vu =qu* [L2 - (c+d)2] 1330.32 kN
    actual shear vc = Vu / Фbod 1038.172 kPa

    allowable punching shear


    βc = long side of column / short side of column 1
    allowable punching shear, vc = (1+2/βc)√fc'/6 2291.288 kPa
    allowable punching shear = √fc'/3 1527.525 kPa
    use min. vc = 1527.525 kPa >> == 1038.172
    OK - 2-way shear
    OK - footing depth but may lessen by
    % 32.04

    check for beam shear


    actual beam shear
    r = L/2 - c/2 -d 0.378 m
    Vu = qu*B*r 289.1072 kN
    vn = Vu/θBd 325.7913 kPa

    allowable beam shear


    va = 1/6√fc' 763.7626 kPa >>== 325.7913
    OK - beam shear
    % 57.34
    r d

    Bending moment
    long direction
    x

    L
    x=( L-h)/2 0.85 m
    actual bending moment Mu = qu*B*x2/2 276.2962 kN-m
    Mn = Mu/.90 306.9958 kN-m
    m = fy/.85fc' 15.40616
    Rn = Mn/Bd2 563.3282 kPa
    ρ = 1/m(1-√1-2mRn/fy) 0.002082
    ρmin = 1.4/fy 0.005091
    required ρ = 0.005091
    As = ρ (actual B*d) 5314.909 mm2
    no. of bars 16mm longitudinal bars 27 ea.

    check ld
    required ld = .02Ab*fy/√fc' 241.3599 mm
    or ld = .06dbfy 264 mm
    required ld = 264 mm

    actual ld = x - concrete cover 780 mm >>== 264


    OK - ld at long direction
    short direction

    x'

    L
    x' = (B - b)/2 0.9 m.
    actual bending moment Mu = qu*L*x'2/2 309.7577 kN-m
    Mn = Mu/.90 344.1753 kN-m
    m = fy/.85fc' 15.40616
    Rn = Mn/Ld2 631.5513 kPa
    ρ = 1/m(1-√1-2mRn/fy) 0.002339
    ρ min = 0.005091
    required ρ = 0.005091
    As = ρ (actual L*d) 5314.909 mm2
    no. of bars 16mm 27 ea.
    for centerstrip 16mm transverse bars at center strip 27 ea. 2 m
    for outerstrip 16mm transverse bars at outer strip 0 ea. 0 m
    check ld
    required ld = 264 mm
    actual ld = x' - concrete cover 830 mm>>== 264
    OK - ld at short direction

    check bearing stress of footing


    allowable = θ*.85fc'A1√(A2/A1) ACI Code
    A1 area column = 0.06 m2
    A2 area of square footing at center strip 4 m2
    √(A2/A1) = 8.164966
    or max √(A2/A1) = 2
    required √(A2/A1) 2
    θ= 0.7
    allowable = θ*.85fc'A1√(A2/A1) ACI Code 1499.4 kN
    actual bearing load = 1.4DL + 1.7LL 1399.766 kN <<== 1499.4
    OK - bearing load of column to footing
    required min area of dowels = .005*area column 300 mm2
    actual area of dowels 4 - 16mm 804.4 mm2 >>== 300
    OK - no. of column dowels
    check development length of dowels (in compression)
    min. Ld = .04db*fy 176 mm
    or min = 200 (ACI 318-83 Section 12-3-1) 200 mm
    Ld = db/4(fy/√fc') 240.0397 mm
    required Ld = Ld(As required/ As actual) 89.52251 mm
    hence, required min Ld = 200 mm
    use ld min 200 mm into both column and footing
    footing bar column dowels
    Phils. Standard Reinforcing Bars Phils. Standard Reinforcing Bars
    r-bar area dia. r-bar area dia.
    6mm 28.27 6 6mm 28.27 6
    10mm 78.54 10 10mm 78.54 10
    12mm 113.10 12 12mm 113.10 12
    16mm 201.1 16 16mm 201.1 16
    20mm 314.2 20 20mm 314.2 20
    25mm 491.90 25 25mm 491.90 25
    28mm 615.75 28 28mm 615.75 28
    32mm 804.25 32 32mm 804.25 32
    201.1 16 201.1 16

    ASTM Standard Reinforcing Bars


    Phils. Standard Reinforcing Bars

    You might also like