Printed date & time:

16/05/2014 15:45
Revision date:
16-May-14
The Polyolefin Company (Singapore) Pte Ltd SDS Reference No.:
TPC-BCP02

Safety Data Sheet

Chemical product & company identification:
1
Product name: COSMOPLENE ® PP
Grade name: AS164, AV161, AW161, AX161
Recommended use: Please refer to product catalogue
Manufacturer's name & address: THE POLYOLEFIN COMPANY (S) PTE LTD
Office: 150, Beach Road, #10-00
Gateway West.
Singapore 189720
Plant: 400/401 Pulau Ayer Merbau
Singapore 628285
Telephone number: +65 6292 9622 (Office)
Fax number: +65 6293 8890, +65 6292 6595
Emergency telephone number: China: +86 532 8388 9090 (Within)
+86 10 5100 3039 (To/ From)
Asia-Pacific (excluding China): +65 3158 1074
Middle East: +44 (0) 1235 239 671
Europe: +44 (0) 1235 239 670

2 Hazards identification:
Classification and hazard symbol are not required according to GHS criteria.

3 Composition/information on ingredients:
Chemical name: Polypropylene (Block Copolymer)
Chemical formula: Basic structure of (C3H6)n with blocks of ethylene
- propylene copolymer
CAS No.: 9010-79-1
Major component name: Ethylene-Propylene Copolymer
Percent by volume or weight: > 99%
Component name: Additives
Percent by volume or weight: <1%

4 First-aid measures:
Inhalation: If exposed to the thermal decomposition gas,
remove the person from exposure to fresh air
environment. If difficulty in breathing occurs,
administer artificial respiration, followed by oxygen
and seek medical attention immediately.

Contact:
Eye: If irritation develop, seek medical attention
immediately.

Page 1 of 5
 Printed date & time:
16/05/2014 15:45
Revision date:
16-May-14
The Polyolefin Company (Singapore) Pte Ltd SDS Reference No.:
TPC-BCP02

Safety Data Sheet

Skin: Pellet is inert and harmless. If irritation develop,
seek medical attention immediately. If in contact
with hot molten resin, do not peel off the hot
molten resin from skin, but flush with plenty of
water (min 15 minutes) to cool down the thermal
burned skin quickly and then seek medical
attention immediately.
Ingestion: If illness or adverse symptoms develop, seek
medical attention immediately.

5 Fire fighting measures:

Suitable fire-extinguishing media: Water spray, foam, carbon dioxide, dry chemicals.

Specific hazards: Dense smoke and hazardous gases (Carbon

monoxide and Carbon dioxide) will be emitted
when it is burned without sufficient oxygen. Resin
when melted will spread on the floor which it will
catch fire easily.
Protective clothing & breathing apparatus: Wear appropriate safety equipment for fire
conditions (including positive pressure self
contained apparatus (SCBA) and protective fire-
fighting garments).

6 Accidental release measures:

Personal precautions & protection equipment: When handling molten resin, use thermal resistant
gloves.
Environmental precautions: Keep pellet out of water sources and sewers.
Methods & materials for containment and Spilled pellet is a slipping hazard. Sweep up and
cleaning up: discard. In case of molten resin spillage, cool it
down with water and then dispose accordingly.

7 Handling & storage:

Handling: Wear appropriate personal protection equipment.
Material is in solid form and is non-hazardous. No
risk to the health of operators when handling at
room temperature. During processing, avoid
inhalation of the fumes and vapors.

Page 2 of 5
 Printed date & time:
16/05/2014 15:45
Revision date:
16-May-14
The Polyolefin Company (Singapore) Pte Ltd SDS Reference No.:
TPC-BCP02

Safety Data Sheet

Ventilation: Workplace must be equipped with a good
ventilation system and fume collector (if
necessary).
Storage container: Store away from heat or flames. Have good
housekeeping to prevent dust accumulation.
Avoid contact with hot aromatic, chlorinated
solvents and other hot strong oxidants.
Conditions of storage: Not relevant.

8 Exposure controls/personal protection:

Occupational exposure limit: No known applicable information
Engineering controls: Not relevant
Personal protective equipment:
Eye protection: Use safety glasses.
Skin protection: Normal clothing. When handling hot molten resin,
wear thermal resistant hand gloves.

9 Physical & chemical properties:

Appearance: Solid, opaque / translucent pellet
Odour: Odourless
Boiling points: Not applicable
Melting points: (°C) 162 ~ 168
Vapour pressure: Not applicable
Specific gravity: 0.9 - 0.92
Solubility in water: Not soluble
Other properties: Soluble in hot aromatic or chlorinated solvents
Autoignition temperature: (°C) Not applicable
Thermal decomposition temperature: (°C) > 300

10 Stability & reactivity:

Stability: Stable under normal temperature & pressure
Decomposition products: Carbon monoxide and carbon dioxide may be
generated.
Polymerization: Will not occur
Incompatible materials: Hot aromatic, chlorinated solvents and hot strong
oxidants

Page 3 of 5
 Printed date & time:
16/05/2014 15:45
Revision date:
16-May-14
The Polyolefin Company (Singapore) Pte Ltd SDS Reference No.:
TPC-BCP02

Safety Data Sheet

11 Toxicological information:
Routes of exposure: Inhalation: Vapors produced are unlikely at room
temperature (with reference to the physical
properties). Dust may produce irritation to the
mucous membrane of the nose, throat and upper
respiratory tract.
Skin contact: Essentially non-irritating but in
contact with hot molten resin can cause severe
burned.
Ingestion: May cause choking if swallowed. Resin
itself is inert and harmless. Ingestion must be
avoided.
Acute effects: No known applicable information
Chronic effects: No known applicable information

12 Ecological information:
Mobility: No known applicable information
Persistence & biodegradability: No known applicable information
Bio-accumulative potential: No known applicable information
Aquatic toxicity & data relating to ecotoxicity: No known applicable information

13 Disposal considerations:
Disposal methods: Recover for reuse if possible. It may be buried on
an authorized landfill site or be incinerated,
however these disposal methods shall comply
with the local authorities legislation.
Disposal containers: Not relevant
Precautions during waste handling: Not applicable

14 Transport information:
Type of packaging: Standard 25 kg resin bag, 650 kg fle-con bag or
sea bulk containers.
Transport requirements: This material is not subjected to transport
regulations.

15 Regulatory information:
Local regulations: Reference to Singapore Standard SS 586, part 1,
2&3
International regulations: OSHA HAZARD COMMUNICATION STANDARD.
This product is NOT a “ Hazardous Chemical” as
defined by the OSHA Hazard Communication
Standard 29 CFR 1910.1200.

Page 4 of 5
 Printed date & time:
16/05/2014 15:45
Revision date:
16-May-14
The Polyolefin Company (Singapore) Pte Ltd SDS Reference No.:
TPC-BCP02

Safety Data Sheet

16 Other information:
Training advice: Not required
FDA information: This material has such quality as products made
from polypropylene will, as long as it is used
unmodified and processed according to standard
manufacturing practices in the industries, comply
with the U.S. FDA Regulation 21 CFR 177.1520
(C) 3.2a.
Note : Direct food contact is subjected to the
extraction provisions of the regulation on the
finished food contact article.
RoHS Compliance: The substance regulated by the EU Directive
2002/95/EC on RoHS in electrical and electronic
equipment are not used in the manufacture of this
product and are therefore not expected to be
present.
EINECS number: None
Written references and/or technical contact Not applicable
points:
Sources of key data used to compile the data Not applicable
sheet:
Disclaimer: The information is based on our current
knowledge, is subjected to continuous updates
and is intended to describe the product in regards
to health, safety and environmental requirements.
TPC makes no warranty of any kind, expressed or
implied, regarding the accuracy of these data.

Page 5 of 5