Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    133 BK 112017

    Uploaded by

    2BL20EC096spoorti Nidoni
    This document is an exam paper for a university-level Network Theory course. It contains: 1) Instructions for the exam, which has two parts - a compulsory Part A with short questions worth 25 marks, and a Part B with longer questions worth 50 marks where students must answer one question from each of 5 units. 2) Part A contains 10 short questions on topics like tie-set matrices, coupled coils, polyphase systems, wattmeter readings, inductance, initial conditions, ports, parameters, filters, and frequency responses. 3) Part B contains 5 longer questions worth 10 marks each, covering topics like coupled circuits, incidence matrices, star-connected systems, delta-connected loads,

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    133 BK 112017

    Uploaded by

    2BL20EC096spoorti Nidoni
    32 views3 pages
    This document is an exam paper for a university-level Network Theory course. It contains: 1) Instructions for the exam, which has two parts - a compulsory Part A with short questions worth 25 marks, and a Part B with longer questions worth 50 marks where students must answer one question from each of 5 units. 2) Part A contains 10 short questions on topics like tie-set matrices, coupled coils, polyphase systems, wattmeter readings, inductance, initial conditions, ports, parameters, filters, and frequency responses. 3) Part B contains 5 longer questions worth 10 marks each, covering topics like coupled circuits, incidence matrices, star-connected systems, delta-connected loads,

    Original Title

    133 Bk 112017

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an exam paper for a university-level Network Theory course. It contains: 1) Instructions for the exam, which has two parts - a compulsory Part A with short questions worth 25 marks, and a Part B with longer questions worth 50 marks where students must answer one question from each of 5 units. 2) Part A contains 10 short questions on topics like tie-set matrices, coupled coils, polyphase systems, wattmeter readings, inductance, initial conditions, ports, parameters, filters, and frequency responses. 3) Part B contains 5 longer questions worth 10 marks each, covering topics like coupled circuits, incidence matrices, star-connected systems, delta-connected loads,

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views3 pages

    133 BK 112017

    Uploaded by

    2BL20EC096spoorti Nidoni
    This document is an exam paper for a university-level Network Theory course. It contains: 1) Instructions for the exam, which has two parts - a compulsory Part A with short questions worth 25 marks, and a Part B with longer questions worth 50 marks where students must answer one question from each of 5 units. 2) Part A contains 10 short questions on topics like tie-set matrices, coupled coils, polyphase systems, wattmeter readings, inductance, initial conditions, ports, parameters, filters, and frequency responses. 3) Part B contains 5 longer questions worth 10 marks each, covering topics like coupled circuits, incidence matrices, star-connected systems, delta-connected loads,

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Code No: 133BK R16

    JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD


    B.Tech II Year I Semester Examinations, November/December - 2017
    NETWORK THEORY
    (Electrical and Electronics Engineering)
    Time: 3 Hours Max. Marks: 75

    Note: This question paper contains two parts A and B.


    Part A is compulsory which carries 25 marks. Answer all questions in Part A.
    Part B consists of 5 Units. Answer any one full question from each unit.
    Each question carries 10 marks and may have a, b, c as sub questions.

    PART- A
    (25 Marks)
    1.a) Give the advantages and disadvantages of tie-set matrix. [2]
    b) Write the expression for total inductance of the three series connected coupled
    coils connected between A and B as shown in circuit shown in figure 1. [3]

    Figure: 1
    c) What are the advantages of poly phase system over single phase system? [2]
    d) Explain the effect of power factor on wattmeter readings in two wattmeter
    method. [3]
    e) Explain why the current in inductance does not change in zero time. [2]
    f) Write a short note on the procedure employed to evaluate initial conditions.
    [3]
    g) Define active and passive ports. [2]
    h) Express Z-parameters in terms of ABCD parameters. [3]
    i) List out the disadvantages of constant – k filters. [2]
    j) Sketch the frequency response of high pass filters. [3]

    PART-B
    (50 Marks)
    2. Determine voltage V across a 15 ohms resistor in the magnetically coupled circuit
    shown in Figure 2. Take Vs = 30∠40 degrees. [10]

    WWW.MANARESULTS.CO.IN
    Figure: 2
    OR
    3. For the graph shown in Figure 3, write the incidence matrix. Express branch
    voltage in terms of node voltages and then write a loop matrix and express branch
    currents in terms of loop currents. [10]

    Figure: 3
    4.a) Derive the relation between line and phase voltages and currents for a balanced
    STAR connected system.
    b) The two watt meter readings in a 3-phase power measurement are 8 KW. The
    latter reading is being obtained after the reversal of current coil. Calculate the
    total power, Active Power, Reactive power and power factor of the load. [5+5]
    OR
    5. A three phase balanced delta connected load of (9+j2) ohm is connected across a
    400V, 3ϕ balanced supply. Determine the phase currents and line currents.
    Assume the phase of sequence to be RYB. Also calculate the power drawn by
    load. [10]

    6. With the switch open steady state is reached with V =100 sin 314 t volts. The
    switch is closed at t=0. The circuit is allowed to come to steady state again.
    Determine steady state current and complete solution of transient current
    (figure 4). [10]

    Figure: 4
    OR
    7. Obtain the expression for i(t) for a series RL circuit when exited by a source of
    V(t)=Vm sin (wt+θ) using Laplace transform. [10]

    8. Find the Y-parameters for the circuit shown in figure 5. [10]

    WWW.MANARESULTS.CO.IN
    Figure: 5
    OR
    9. The Z-parameters of a two- port network are Z11=15Ω, Z12=Z21=6Ω and Z22=24Ω.
    Determine ABCD parameters. [10]

    10. Design a band pass filter with cutoff frequencies of 2000Hz and 5000Hz with a
    design impedance of 500 ohms. [10]
    OR
    11. Design a m-derived low filter with a design impedance of 300Ω and the cut off
    frequency at 2 KHz and infinite attenuation at 2345Hz. [10]

    ---oo0oo---

    WWW.MANARESULTS.CO.IN

    You might also like