Sheet1

Designed By: akkhokhar Rev. No.: R0

Checked By:
Subject: Design of Slab S1
Date:
Project: NPP QATAR

Design of SlabS1 as per IS:456-2000:

(for Slab with Top & Bottom Reinforcement Mesh )
Input Data:

Material :
Concrete Grade = 40 N/mm2
Reinforcement Steel Grade= 460 N/mm2

Dimensions:
Short Span : Lx: 6.5 m
Long Span : Ly: 6.73 m
Clear Cover in Lx = 30 (Check for Fire Rating Consideration)
Effective Cover: 36 mm (Cover should comply clause 26.4
Effective Cover(longer) 48 mm
of IS:456)
Boundary Condition: 8 * For Two way slab,refer the sketch
on the right side.Dark line shows
the continuity.
* For one way continuous slab,
5 for Intermediate Panel,7 for end Panel,
* For one way discontinuous slab, 9.
* For cantilever slab, 10.

Load :
Floor Finish Load wf: 6 kN/m2 (Self weight is calculated automatically)
Live Load wL: 1.5 kN/m 2

Load Factor for BM: 1.5

Load Factor for SF: 1.5
Calculations:
Aspect ratio=Ly/Lx= 1.0353846
Slab designed as: TWO WAY slab

Bending Moment Coefficients:

ax support = 0 0 For short span support moment.
ax span = 0.043 0.043 For short span span moment.
ay support = 0.057 For Long span support moment.
ay span = 0.043 For Long span span moment.

Depth assumed D = 250 mm OK

Selfweight wself =25xD/1000= 6.25 kN/m2
( Density of concrete assumed 25 kN/m3)
Load intensity = w = wself+wf+wL= 13.75 kN/m2 (unfactored)
Effective depth d= D - Eff. Cover (shorter)= 214 mm

Page 1
 Sheet1

Effective depth d= D - Eff. Cover (longer)= 202 mm

Factored Bending Moments=Factor x w x Coefficient x Lx2

Mu/bd2 pt req Ast req

% mm2/ m Explanation:
Mux support= 0 kN m 0 0 0 Mu/bd =Mux10 /(1000xd
2 6

Mux span= 37.470469 kN m 0.818204 0.2095099 448.351212 pt req is from charts of SP-16.
Muy support= 49.670156 kN m 1.2172864 0.3156471 637.607151 Ast= ptx1000xd/100
Muy span= 37.470469 kN m 0.9183038 0.2358744 476.466206

Minimum Ast req=0.12X1000xD/100= 300 mm2 per meter

Reinforcement Provided:
Short Span Support: 12 Dia at 150 c/c Ast= 753.6
Short Span Span: 12 Dia at 150 c/c Ast= 753.6
Long Span Support: 12 Dia at 125 c/c Ast= 904.32
Long Span Span: 12 Dia at 125 c/c Ast= 904.32

Check for Deflection:

Basic L/d = 20 (Clause 23.2.1 of IS 456-2000)
Modification factor= 2 ( Figure 4 of IS 456-2000)
d req as per deflection control=Lx/(Basic L/d x Modification factor for tension & compression )=
d required < d provided so OK

Check for Shear:

Shear Force Vu= Factor x w x Lx/2= 67.03125 kN
Nominal Shear Stress=Vu/bd= 0.3132301 N/mm2
%reinforcement= 0.3521495 %
Beta= 13.18758
tc= 0.4364126 N/mm2
k= 1.1
kxtc= 0.4800539 N/mm2
OK

Page 2
 Sheet1

gn of Slab S1

SEMAC CONSULTANTS PVT. LTD.

1 2
2

3 4
3 4
EFFECTIV 36
EFFECTIV 48

5 6
5 6

7 8
7 8

9
9

Page 3
 Sheet1

Explanation:
d =Mux10 /(1000xd2)
2 6

from charts of SP-16.

ptx1000xd/100

ok
ok
ok
ok

Modification Factor for compression reinf.

(refer fig. 5 of 1S 456-2000

180.8745107 mm 0.898413 = Modification Factor for Compression r/f

Page 4
DALAL CONSULTANTS ENGINEERS LIMITED 09/14/2022

For Cantilever Slab,Parapet Wall Details:

Wall at the end of Wall Height: 0.9
Cantilever slab Wall Thk: 0.12
TWO WAY slab

Fck:- 40 Cover 36 REINFORCEMENT

Cover 48
Lx Lz WL WF Boundary treq tprov treq SHORT SPAN
SHORT LONG Live Finish Condition initial final SPAN SUPPORT
m m Kn/m Kn/m Required Provided Required Provided
6.50 6.7 1.5 6 8 ### 250 198.5 12 252 12 150 12 377 12 150
LONG SPAN
1 2 3 SPAN SUPPORT
3 Required Provided Required Provided
4 5 6 12 237 12 125 12 177 12 125
6
7 5
8 9
9

Boundary Conditions: Two Way Slab: 1 to 9 as per code

One Way Slab: 5 for Intermediate panel
7 for End Panel
9 for Simply Supported
Cantilever Slab: 10

Page 5
 Sheet3

TWO WAY SLAB:

Lx(Short Span) 6500 LL 1.5
Lz(Long Span) 6730 Finishing 6
Aspect ratio 1.0 dl 6.25 1.0
slab th(ini) 244.3333 w 13.75
slab th(pro) 250 wu 20.625
Boundary condition 8 Fck 40
Mu SUPP(short) 0 Ast req 300 Ast pro 753.6 0.398
Mu SPAN (short) 37.47047 Ast req 448.3512 Ast pro 753.6 0.595
Mu SUPP(long) 49.67016 Ast req 637.6072 Ast pro 904.32 0.705
Mu SPAN(long) 37.47047 Ast req 476.4662 Ast pro 904.32 0.527
Thickness Req 198.5
20

fs 158.7316 159 pt 0.3521

l 2

DEAD LIVE
ax support = 0 0
ax span = 0.043 0.043
ay support = 0.057
ay span = 0.043

Reinforcement Steel Grade= 460

CONCRETE GRADE fck= 40

B D d Mu Mu/Bd2
pt Ast Ast min
1000 250 214 0 0 0 0 300
1000 250 214 37.47047 0.818204 0.2095 448.3512 300
1000 250 202 49.67016 1.217286 0.3156 637.6072 300
1000 250 202 37.47047 0.918304 0.2359 476.4662 300

REQUIRD 8 TOR @ 169 C/C. MAXIMUM SPACIN 642

COMBINE 8 10 216 C/C

fs 0.2 0.3 0.4 0.5 0.6 0.7

120 2 2 2 2 2 1.9
145 2 2 2 1.9 1.8 1.68
190 2 1.85 1.7 1.55 1.4 1.35
240 1.7 1.5 1.35 1.25 1.15 1.1
290 1.4 1.25 1.15 1.075 1 0.95
lambda #N/A #N/A #N/A #N/A #N/A #N/A

#N/A

DEAD

5 7 9 10 5 7
SPAN
0.0625 0.083333 0.125 0.5 0.083333 0.1
5 7 9 10 5 7
SUPPORTS
0.083333 0.1 0.125 0.5 0.111111 0.111111

Page 6
 Sheet3

1 2 3 4 5 6 7 8
0.032 0.037 0.037 0.047 0.045 0 0.057 0
0.024 0.028 0.028 0.035 0.035 0.035 0.043 0.043
0.032 0.037 0.037 0.047 0 0.045 0 0.057
0.024 0.028 0.028 0.035 0.035 0.035 0.043 0.043

Moments
Types of
Case no. consider
Panels
ed Short Span Coefficients

(Values of ly/lx)
1 1.1 1.2 1.3 1.4
Interior
1
Negative moment at
Panels 0.032 0.037 0.043 0.047 0.051
conti. edge.
Positive moment at 0.024 0.028 0.032 0.036 0.039
Mid-span

One Short
Edge
2
Discontin
uous.
Negative moment at 0.037 0.043 0.048 0.051 0.055
conti. edge.
Positive moment at 0.028 0.032 0.036 0.039 0.041
Mid-span
One Long
Edge
3
Discontin
uous.
Negative moment at 0.037 0.044 0.052 0.057 0.063
conti. edge.
Positive moment at 0.028 0.033 0.039 0.044 0.047
Mid-span
Two
Adjacent
4 Edges
Discontin
uous.
Negative moment at0.047 0.053 0.06 0.065 0.071
conti. edge.
Positive moment at0.035 0.04 0.045 0.049 0.053
Mid-span

Two Short
Edges
5
Discontin
uous.
Negative moment at0.045 0.049 0.052 0.056 0.059
conti. edge.
Positive m 0.035 0.037 0.04 0.043 0.044
Mid-span
Two Long
Edges
6
Discontin
uous.
Negative moment at 0 0 0 0 0
conti. edge.

Page 7
 Sheet3

Positive moment at0.035 0.043 0.051 0.057 0.063

Mid-span
One Long
Edge
7
continuou
s. Negative moment at
0.057 0.064 0.071 0.076 0.08
conti. edge.
Positive moment at0.043 0.048 0.053 0.057 0.06
Mid-span

One Short
Edge
8
continuou
s.
Negative moment at 0 0 0 0 0
conti. edge.
Positive moment at0.043 0.051 0.059 0.065 0.071
Mid-span
Four
Edges
9
Discontin
uous.Positive moment at0.056 0.064 0.072 0.079 0.085
Mid-span

Page 8
 Sheet3

1 2
2

3 4
3 4

5 6
5 6

7 8
7 8

9
9

0.8 1
1.8 1.6
1.55 1.4
1.3 1.2
1.05 1
0.9 0.85
#N/A #N/A

LIVE

9 10
0.125 0.5
9 10
0.125 0.5

Page 9
 Sheet3

0.056
0
0.056

Coefficien
ts for all
an Coefficients values of

(Values of ly/lx)
1.5 1.75 2 ly/lx

0.053 0.06 0.065 0.032

0.041 0.045 0.049 0.024

0.057 0.064 0.068 0.037

0.044 0.048 0.052 0.028

0.067 0.077 0.085 0.037

0.051 0.059 0.065 0.028

0.075 0.084 0.091 0.047

0.056 0.063 0.069 0.035

0.06 0.065 0.069 0

0.045 0.049 0.052 0.035

0 0 0 0.045

Page 10
 Sheet3

0.068 0.08 0.088 0.035

0.084 0.091 0.097 0

0.064 0.069 0.073 0.043

0 0 0 0.057

0.076 0.087 0.096 0.043

0.089 0.1 0.107 0.056

Page 11