Canon Engineers Handbook V21

Engineer’s Pocket Guide
This booklet is intended as a guide only and is correct at the time of issue
given that part numbers change without notice.
Revision 21.0
For any additions or corrections, please contact [email protected]
Engineers Pocket Guide V21 Created by TT&S CUK April 2019

INDEX
Page 3 Miscellaneous, IR1018; IR1133; IR1435
Page 4 iR2016; iR2018; iR2520; iR1730
Page 5 iR2202; iR2270 – 3025 – 3225
Page 6 iR5570; iR5055
Page 7 iR7105; iR Advance 500
Page 8 iR Advance 715; iR Advance 4xxx; iR Advance 6xxx
Page 9 iR Advance 8xxx
Page 11 iRC 2880,3580
Page 12 iRC 4080; iRC 1325; iR Advance C250/255/356
Page 13 iR Advance C2xxx; iR Advance C33xx/35xx
Page 14 iR Advance C5xxx
Page 15 iR Advance C7xxx/9xxx
Page 16 imagePRESS C1; imagePRESS C600/ 650
Page 18 Document Feeders
Page 19 Finishers
Page 22 Error Codes
Engineers Pocket Guide V21 Created by TT&S CUK April 2019

The recommended tools listings can be found in the 'Quality Process' database under Inventory Control\Tools and Kits.
MISCELLANEOUS
FB4-3687 TUNGSTEN CORONA WIRE Sundries
FY9-9323 CA7 COLOUR TEST CHART (LADY) FL2-3987 ADF SEP PAD
FY9-9030 CA1 COLOUR TEST CHART (BUTTERFLY) FC6-7765 ADF SEP ROLLER
FY9-9131 APS TEST CHART FC6-7766 ADF P/U ROLLER
FY9-9196 NA3 TEST CHART PCB’s
FY9-9202 CFF TEST CHART FM2-8365 DC CONTROLLER (1018)
FY9-9200 NA8 TEST CHART FM2-8367 DC CONTROLLER (1022)
FY9-6022 PERMALUBE FM3-8877 DC CONTROLLER (1024)
FA5-1876 CAT GUT FK2-1376 POWER SUPPLY UNIT
XB7-2100-409 M4 NUT FM2-5045 IMAGE PROCESSOR (1018/22)
FA9-4026 EDIT PEN (GREY) FM2-6088 IMAGE PROCESSOR (1024)
WT2-5870 CABLE TIES
FY9-6007 TOSPEARL 240, LUBE POWDER iR1133
UK-PART-010 ENGINEER JOB PADS Image Process
UK-PART-014 ARALDITE SYRINGE (POLY BOX) 3480B006AA DRUM/TONER CARTRIDGE
UK-PART-039 HEALTH & SAFETY SIGN (A CONSUMABLE NOT ORDEREABLE BY AN ENGINEER)
UK-PART-040 KETTLE LEAD (10A RATING, 13A FUSED) Fixing
UK-PART-052 3 AMP CARTRIDGE FUSE RM1-6406 FIXING ASSY
UK-PART-053 13 AMP CARTRIDGE FUSE (TL533) Paper Feed
UK-PART-068 OPTICS CLEANER RC2-6130 P/U ROLLER (x2)
UK-PART-072 5 AMP CARTRIDGE FUSE (TL532) RM1-6414 P/U ROLLER ASSY
UK-PART-097 LOCTITE EASY BRUSH (5g) RM1-6454 SEP PAD ASSY
UK-PART-098 MACHINE RECORD BOOKS RL1-2120 MULTI FEED P/U ROLLER
UK-PART-100 UNIVERSAL SERVICE STICKER (1=20) RL1-2115 MULTI FEED SEP PAD
UK-PART-138 MINERAL OIL FM3-9798 CASSETTE
UK-PART-140 WASTE TONER BAG (1=50) Sundries
UK-PART-142 WASTE TONER BAG WIDE (1=50) FC7-6297 ADF SEP PAD
UK-PART-153 ALCOHOL BOTTLE 200ml FL2-6637 ADF SEP ROLLER
UK-PART-154 CANON FOAM SPRAY 300ml FC7-6189 ADF P/U ROLLER
UK-PART-229 MIRRORWIPES (1=100) PCB’s
UK-PART-042 15A MAINS LEAD RM1-6424 LASER ASSY
UK-PART-135 CROSSOVER CABLE FM4-9013 ENGINE CONTROLLER ASSY (PSU)
FM4-8952 MAIN CONTROLLER (1133iF)
eCopy ScanStation FM4-8951 MAIN CONTROLLER (1133 / 1133A)
Refer to Nuance RMA procedure for iR1435i/iF

in-warranty item replacement (Answer ID 16615) Image Process
9437B002AA DRUM
FM1-H643 DEV ASSY
For out-of-warranty sundry items, refer to FE3-4057 TRANSFER ROLLER
SIMS>Solutions>eCopy>GEN-021 Fixing
FM1-H641 FIXING ASSY
NOTE: Parts NLA=No Longer Available FM1-H642 FIXING FILM ASSY
RC2-7837 LOWER PRESSURE ROLLER
FE4-0326 BUSHING (FRONT)
B&W FE4-5690 BUSHING (REAR)
iR1018/1022/1024 Paper Feed
Image Process FL0-3259 CASS P/U ROLLER (x2)
0388B002AA DRUM FL0-3407 CASS FEED ROLLER
FM2-8214 DEV ASSY FL0-3408 CASS SEP ROLLER
Fixing FL2-3897 MULTI FEED P/U ROLLER
FM2-9046 FIXING ASSY FL3-4890 MULTI FEED SEP PAD
Paper Feed FM1-D531 CASSETTE
FB4-9817-030 P/U ROLLERS (x2) Sundries
FL2-3887 FEED ROLLERS (x2) FM4-9857 ADF SEP PAD
FL2-3897 MULTI FEED P/U ROLLER FM4-9859 ADF P/U (FEED) ROLLER UNIT
FL2-3898 MULTI FEED SEP PAD
NLA CASSETTE
Engineers Pocket Guide V21 Page 3 Created by TT&S CUK April 2019
iR2520/25/30/35/45
Image Process
PCB’s 2772B003AA DRUM
FM1-K856 MAIN CONTROLLER (1435i) FM3-9263 DEV ASSY
FM1-K855 MAIN CONTROLLER (1435iF) FC9-0693 TRANSFER ROLLER
FM1-B918 ENGINE CONTROLLER PCB Fixing
FM1-J727 PSU FM3-9381 FIXING ASSY (2520/25/30)
FM1-G757 LASER ASSY FM3-9382 FIXING FILM ASSY (2520/25/30)
FM1-B888 HVT PCB ASSY FM3-9302 FIXING ASSY (2535/45)
FM3-9303 FIXING FILM ASSY (2535/45)
iR2016/2020 FC7-0242 LOWER PRESURE ROLLER (2520/25/30)
Image Process FC9-1063 LFR BUSHING (2520/25/30)
0385B002AA DRUM FC9-8974 LOWER PRESURE ROLLER (2535/45)
FM3-3671 DEV ASSY XG9-0172 LFR BEARING (2535/45)
FC6-4313 TRANSFER ROLLER Paper Feed
Fixing FL3-1447 SEP PAD (250 SHEET CASS)
FM2-3352 FIXING ASSY FL3-1352 P/U ROLLER (250 SHEET CASS)
FM2-3353 FIXING FILM ASSY FB6-3405 CASS P/U ROLLER (550 SHEET CASS)
Paper Feed FC0-5080 CASS FEED ROLLER (550 SHEET CASS)
FB4-5814 CASSETTE REAR PAPER STOP FC6-6661 CASS SEP ROLLER (550 SHEET CASS)
FC6-4286 VERTICAL PATH ROLLER FU3-0280 GEAR, 15T
FF6-1621 CASS SEP & FEED ROLLER FM3-9372 PAPER P/U ASSY (250 SHEET CASS)
FC6-4389 MOD P/U ASSY 27T/50T GEAR FM3-9277 PAPER P/U ASSY (550 SHEET CASS)
FU6-0776-030 MOD P/U ASSY 29T GEAR FL3-1352 MULTI FEED P/U ROLLER
PCB’s FL3-3469 MULTI FEED SEP PAD
FK2-1075 PSU PCB ASSY Sundries
FM2-4015-060 DC CONTROLLER (2016) FM3-9276 WASTE TONER BOTTLE
FM2-4017-060 DC CONTROLLER (2020) PCB’s
FM2-4054 IMAGE PROCESSOR PCB (2016/2020) FM1-H932 HVT PCB ASSY (2535/45)
FM3-1921 IMAGE PROCESSOR PCB (2016i/2020i) FM1-H933 HVT PCB ASSY (2520/25/30)
FM2-4018 HVT PCB ASSY
iR1730/40/50
iR2018/22/25/30 Image Process
Image Process 2773B003AA DRUM
2101B002AA DRUM FM4-6494 DEV ASSY
FM3-3671 DEV ASSY FM4-6522 TRANSFER ROLLER UNIT
FC6-4313 TRANSFER ROLLER Fixing
Fixing FM1-P255 FIXING ASSY
FM0-0159 FIXING ASSY Paper Feed
FM4-9382 FIXING FILM ASSY FB6-3405 CASS P/U ROLLER
Paper Feed FC0-5080 CASS FEED ROLLER
FB4-5814 CASSETTE REAR PAPER STOP FC6-6661 CASS SEP ROLLER
FC8-0164 VERTICAL PATH ROLLER FL2-3897 MULTI FEED P/U ROLLER
FB6-1613 LWR VERTICAL PATH ROLLER FL3-4890 MULTI FEED SEP PAD
FF6-1621 CASS SEP & FEED ROLLER FM4-6558 CASSETTE
PCB’s Sundries
FK2-5356 PSU PCB ASSY FM4-8035 WASTE TONER BOTTLE
FM3-2993 DC CONTROLLER (2018) FM1-A719 ADF SEP PAD
FM3-2995 DC CONTROLLER (2022) FM4-7732 ADF P/U (FEED) ROLLER UNIT
FM3-2997 DC CONTROLLER (2025) PCB’s
FM3-2999 DC CONTROLLER (2030) FM1-C832 MAIN CONTROLLER (1730)
FM3-3320 IMAGE PROCESS PCB (2018/18N/20/20N) FM1-C833 MAIN CONTROLLER (1740)
FM3-3319 IMAGE PROCESS PCB (2018i/22(i)/25(i)/30(i)) FM1-C834 MAIN CONTROLLER (1750)
FM3-2987 HVT PCB ASSY FM1-B818 ENGINE CONTROLLER PCB
FM4-8051 PSU
FM0-1846 LASER ASSY
FM1-C816 HVT PCB ASSY
iR2202/2204 FM2-0141-020 CASSETTE UPPER
Image Process FM2-0142-020 CASSETTE LOWER
6954B002AA DRUM FB6-4852 VERTICAL PATH ROLLER
FM1-B029 DEV ASSY FC5-0697 DUPLEX REFEED GUIDE
FE3-2866 TRANSFER ROLLER FC5-1356 LOWER FUSER/DELIVERY GUIDE
Fixing FM3-1296 RIGHT LWR DOOR ASSY
FM1-F160 FIXING ASSY (LOCAL PRINT MODEL) FM3-1298 RIGHT LWR DOOR DECK PATH ASSY
FM1-F162 FIXING ASSY (N/W MODEL) FM3-1297 INNER LWR DOOR ASSY (BLACK GUIDE)
Paper Feed FM2-1335 3-WAY DOOR ASSY
FL3-1352 CASS 1 P/U ROLLER FC5-0484 PRE-REG SENSOR ARM
FL3-1447 CASS 1 SEP PAD FL2-4520 PRE-REG SENSOR ARM (INC METAL
FM1-B350 CASS 1 PAPER P/U ASSY PLATE)
FB4-9817-030 CASS 2 P/U ROLLER Sundries
FF6-1621 CASS 2 FEED ROLLER FM2-0303 WASTE TONER BOTTLE
FC8-0170 CASS 2 SEP ROLLER FM3-1296 LOWER DOOR
FM1-B394 CASS 2 PAPER P/U ASSY NLA PLATEN LID
FL2-3202 MULTI FEED P/U ROLLER FC8-1256 PLATEN LID HINGE
FL2-3201-010 MULTI FEED SEP PAD FC5-1057 LED WINDOW FOR CONTROL PANEL
FM1-B366 CASSETTE 1 FH6-5075 REG CLUTCH, CL2 (22/2870/3025)
FM1-B325 CASSETTE 2 FK2-0361 REG CLUTCH, CL2 (3570/4570/3035/45)
ADF FK2-6870 REG CLUTCH, CL2 (3225/35/45)
FG3-4043 P/U ROLLER UNIT FK2-0385 MAIN MOTOR (22/2870/3025)
FL3-3239 SEP PAD FK2-0362 MAIN MOTOR (35/4570/3035/45)
PCB’s FK2-6300 MAIN MOTOR (3225)
FM1-D997 CONTROLLER PCB (2202) FK2-6299 MAIN MOTOR (3235/45)
FM1-W801 CONTROLLER PCB (2204F) FL2-2997 CONTACT IMAGE SENSOR ASSY
FM1-W802 CONTROLLER PCB (2204 N/W MODEL) FC7-5893 AIR FILTER (x2) (RH DOOR)
FM1-W806 CONTR’LER PCB (2204 LOCAL PRT) PCB’s
FM1-F171 LASER ASSY FK4-1729 HDD (22/28/35/4570/3025/35/45) (SATA)
FM1-C895 SATA SET (WITHOUT ENCRYTION)
FM3-5634 HDD (3225/35/45)
iR22/28/35/4570 3025/35/45 3225/35/45 FH7-7625-030 RCD
Image Process FM2-3544 CONTROL PANEL ASSY (22/28/35/4570)
9630A003AA DRUM FM2-5612-010 CONTROL PANEL ASSY (3025/35/45)
FM3-7045 DEV ASSY FM3-7262 CONTROL PANEL ASSY (3225/35/45)
FC6-2911 TRANSFER ROLLER FM2-0276 LASER SCANNER ASSY (22/2870/3025)
Fixing FM2-0334 LASER SCANNER ASSY (35/4570/3035/45)
FM3-1279 FIXING ASSY (2270/2870/3025) FM3-5464 LASER SCANNER ASSY (3225)
FM3-1294 FIXING ASSY (3570/4570/3035/45) FM3-5041 LASER SCANNER ASSY (3235/45)
FM3-7064 FIXING ASSY (3225) FM2-2788 DC CONTROLLER (2270/2870)
FM3-7067 FIXING ASSY (3235/45) FM2-4903 DC CONTROLLER (3570/4570)
FM2-0359 UPPER FIXING FILM (22/2870/3025) FM3-1262 DC CONTROLLER (3025)
FM2-1812 UPPER FIXING FILM (35/4570/3035/45) FM3-1263 DC CONTROLLER (3035/45)
FM3-7069 UPPER FIXING FILM (3225) FM3-5052 DC CONTROLLER (3225)
FM3-7071 UPPER FIXING FILM (3235/45) FM3-5051 DC CONTROLLER (3235/45)
FC8-9332 HEATSINK ROLLER FM2-4550-010 MAIN CONT’R (22/28/35/4570 & 3025/35/45)
Paper Feed FM4-1245 MAIN CONTROLLER (3225)
FC5-7244 CASS DOOR PADS FM4-1247 MAIN CONTROLLER (3235)
FB6-3405 CASS P/U ROLLER FM4-1248 MAIN CONTROLLER (3245)
FC0-5080 CASS FEED ROLLER WA7-3296 DIMM (22/28/35/4570)
FC6-6661 CASS SEP ROLLER WA7-4652 DIMM (3025/35/45)
FF5-7829 DECK P/U ROLLER, REAR FM4-0763 DIMM (3225/35/45)
FF5-7830 DECK P/U ROLLER FRONT FM2-0261 HVT PSU ASSY
FB6-0615 DECK FEED ROLLER (x2) FM2-0245 MAIN PSU PCB
FF5-9779 DECK FEED ROLLER ASSY (ALT) FM2-3221 DELIVERY CONTROLLER PCB ASSY
FB2-7777-020 DECK SEP ROLLER FK2-0339 ACCESSORY PSU PCB ASSY
FB5-6586 DECK SEP ROLLER (ALT) FG3-3765 READER CONTROLLER PCB
FB1-8581 MULTI FEED P/U ROLLER FK2-0341 ALL NIGHT PSU ASSY
FC5-0488 MULTI FEED SEP PAD
FH6-5076 MULTI FEED CLUTCH
FC5-0592 CASSETTE STOP
iR5570/6570 FM1-C895 SATA SET (WITHOUT ENCRYTION)
Image Process FM2-3040 POTENTIAL CONTROL PCB ASSY
4229A002AA DRUM FM2-3089 or 90 CONTROL PANEL ASSY
FM2-3069 PRIMARY ASSY FM2-3646 DC CONTROLLER
FM2-9716 TRANS/SEP ASSY FM2-3794 MAIN CONTROLLER
FM2-9647 PRE-TRANS ASSY FK2-0800 DC POWER SUPPLY
FB4-3687 CORONA WIRE FM2-3670 LASER
FL2-4271 PRIMARY & TRANSFER CLEANING PAD FM2-3045 AC DRIVER
FL2-4272 PRIMARY & TRANSFER CLEANING PAD FM2-3653 HVT
FF5-3090 PRE-TRANSFER CLEANING PAD FM2-3649 FIXING HEATER POWER SUPPLY
FM2-3081 DEV UNIT
FM2-3086 HOPPER ASSY iR5055/5065/5075
FK2-0813 TONER DRIVE MOTOR (M9) Image Process
FM2-3029 HOPPER (TONER BOTTLE) DRIVE ASSY 4229A002AA DRUM
FL2-0597-010 CAM RING MOVEMENT FM2-3069 PRIMARY ASSY
FA9-3995 DRUM CLEANING BLADE FM2-9716 TRANS/SEP ASSY
FM2-3070 PROCESS UNIT (AP KIT) FM2-9647 PRE-TRANS ASSY
Fixing FB4-3687 CORONA WIRE
FC6-3566 UFR FL2-4271 PRIMARY & TRANSFER CLEANING PAD
FM2-4683 LFR (INC BEARINGS) FL2-4272 PRIMARY & TRANSFER CLEANING PAD
FY1-1157 WEB FF5-3090 PRE-TRANSFER CLEANING PAD
FC6-3502 UFR BUSHES FM2-9640 DEV UNIT
FK2-0809 MAIN THERMISTOR FM2-9652 HOPPER (TONER BOTTLE) DRIVE ASSY
FM2-4161 SUB THERMISTOR FL2-0597-010 CAM RING MOVEMENT
FM2-5035 FIXING ASSY FA9-3995 DRUM CLEANING BLADE
XG9-0563 UFR BEARING FM2-9700 PROCESS UNIT (AP KIT) (5055/65)
FM2-3012 FIXING HEATER (HOLDER UNIT) FM2-9686 PROCESS UNIT (AP KIT) (5075)
FC5-5145 FUSER INLET SENSOR ARM Fixing
FM2-4214 THERMAL SWITCH FC7-4276 UFR
FB5-3625 UPPER SEP CLAW FC7-4237 LFR
FA2-9037 LOWER SEP CLAW FY1-1157 WEB
FM2-4169 FUSER KNOB ASSY FC6-3856 UFR BUSHES
Paper Feed FK2-5252 MAIN THERMISTOR
FF5-7829 PICK-UP ROLLER (DECK/CASS) FM2-4161 SUB THERMISTOR
FF5-7830 PICK-UP ROLLER (DECK/CASS) FM2-4214 THERMOSWITCH
FB6-0615 FEED ROLLER (DECK/CASS) FB5-3625 UPPER SEP CLAW
FB2-7777-020 SEP ROLLER (DECK/CASS) FA2-9037 LOWER SEP CLAW
FB5-6586 DECK SEP ROLLER (ALT) XG9-0563 UFR BEARING
FB1-8581 PICK UP/FEED ROLLER (MULTI FEED) XG9-0636 LFR BEARING
FB5-0873 SEP ROLLER (MULTI FEED) FM2-9733 FIXING ASSY
FM2-3096 LH DECK PICK UP ASSY FM2-3012-010 FIXING HEATER (HOLDER UNIT)
FM2-3095 RH DECK PICK UP ASSY FB5-3420 DELIVERY HANDLE (GREEN)
FC6-3768 DECK LIFTER CABLES FM2-4169 FUSER KNOB ASSY
FM2-3079 CASS PICK UP ASSY Paper Feed
FB5-3321 D/S SPONGE ROLLER FF5-7829 P/U ROLLER (DECK/CASS)
FF5-9874-030 DUPLEX GUIDE/PLASTIC TRAY FF5-7830 P/U ROLLER (DECK/CASS)
FB5-3304 DUPLEX DIVERTER (FINGERS) ASSY FB6-0615 FEED ROLLER (DECK/CASS)
Sundries FB2-7777-020 SEP ROLLER (DECK/CASS)
FC6-3693 OZONE FILTER (500K) FB5-6586 DECK SEP ROLLER (ALT)
FL2-7979 COPYBOARD GLASS FB1-8581 P/U/FEED ROLLER (MULTI FEED)
FF3-3964 CL1 DEV CLUTCH FB5-0873 SEP ROLLER (MULTI FEED)
FH7-5728 CL2 REG CLUTCH FM2-9658 LH DECK P/U ASSY
FH7-5729 CL3 MULTI FEED CLUTCH FM2-9657 RH DECK P/U ASSY
FH7-5729 CL4 LEFT DECK PULL OFF CLUTCH FC6-3768 DECK LIFTER CABLES
XG9-0224 DECK RUNNERS FM2-9656 CASS P/U ASSY
FL2-1092 LCD DISPLAY FB5-3321 D/S SPONGE ROLLER
FG6-9897 TRANSPORT BED ASSY FF5-9874-030 DUPLEX GUIDE/PLASTIC TRAY
FB5-5522 TRANSPORT BED BELTS (x2) FB5-3304 DUPLEX DIVERTER (FINGERS) ASSY
FB5-3420 DELIVERY HANDLE (GREEN) Sundries
PCB’s FC6-3693 OZONE FILTER (500K)
FK4-1729 HDD (NEW SATA TYPE)
FL2-7979 COPYBOARD GLASS FB5-6586 DECK SEP ROLLER
FK2-0209 CL1 DEV CLUTCH FG9-3889-010 RH DECK P/U ASSY
FK2-0856 CL2 REG CLUTCH FG9-3890-010 LH DECK P/U ASSY
FK2-0851 CL3 MULTI FEED DRIVE CLUTCH FG6-8788 S/DECK P/U ASSY
FK2-0850 CL4 LEFT DECK PULL OFF CLUTCH FG9-3888 CASS P/U ASSY
FL2-1092 LCD DISPLAY FC1-5081 DECK REAR FLANGE
FM2-4205 TRANSPORT BED ASSY FA6-9988-020 DECK FRONT FLANGE
FB6-7043 TRANSPORT BED BELTS (x2) FC6-3768 DECK LIFTER CABLE
PCB’s FS4-0160 DECK LIFTER GEAR
FK4-0582 HDD (NEW SATA TYPE) Sundries
FM1-C897 SATA SET (WITHOUT ENCRYPTION) FB6-0397 OZONE, SEPARATION (1 Mil)
FH7-7625-030 RCD FB6-0776 OZONE, DRUM (1 Mil)
FM2-3040 POTENTIAL CONTROL PCB ASSY FC7-7268 OZONE, FIXING (1 Mil)
FM2-9705 CONTROL PANEL ASSY FB2-8196 RACKING/LIFTER PLATE STOP (UNIT 1)
FM2-9857 DC CONTROLLER PCB’s
FM3-0221 MAIN CONTROLLER FK4-0582 HDD (NEW SATA TYPE)
WA7-4131 DIMM, SDRAM FM1-C897 SATA SET (WITHOUT ENCRYPTION)
FM2-9682 HVT ASSY (PCB&TRANSFORMER) (5055/65) FH7-7626 RCD
FK2-3473 DC PSU ASSY FM2-5423 MAIN CONTROLLER (7086/7095)
FM2-9671 DC HVT PSU ASSY (PCB) (5075) FM2-7517 MAIN CONTROLLER (7105)
FM2-9642 AC HVT PSU ASSY (TRANSFORMER) (5075) FM2-4355 DC CONTROLLER
FM2-9832 LASER FG6-7238 DC PSU ASSY
FM2-9680 AC DRIVER FG6-7249 HVAC PCB ASSY
FM2-3649 FIXING HEATER POWER SUPPLY FM2-4351 HVT PCB ASSY
iR7086/7095/7105 iR ADVANCE 400/500

Image Process Image Process
6749A002AA DRUM 2773B003BA DRUM
FG6-7313 PRIMARY ASSY FM4-6522 TRANSFER ASSY
FM3-0455-010 TRANS/SEP ASSY FM1-A131 STATIC ELIMINATOR HOLDER
FM2-5857 PRE-TRANS ASSY FM4-6494 DEV ASSY
FB6-2720 DC BLADE Fixing
FM2-5870 AP KIT ASSY FM1-P255 FIXING ASSY
FM2-4872 DEV ASSY Paper Feed
FM2-8146 LASER ASSY FB6-3405 CASS P/U ROLLER
Fixing FC0-5080 CASS FEED ROLLER
FY1-1157 WEB FC6-6661 CASS SEP ROLLER
FB5 6930 UFR FM1-B727 PAPER P/U ASSY
FB6-2374 LFR FL2-3897 MULTI FEED P/U ROLLER
FB5-6934 UFR BUSHES FL3-4890 MULTI FEED SEP PAD
XG9-0421 UFR BEARINGS FM1-A701 CASSETTE
XG9-0447 LFR BEARINGS FM4-6571 SIZE DETECT UNIT
FB5-3625 UPPER SEP CLAW FM4-6574 VERTICAL PATH GUIDE
FS7-0007 UFR FRONT DRIVE GEAR
FB5-7560 UFR REAR RING/COLLAR (BLACK) Sundries
FH7-4709 HEATER, MAIN (7086) FM4-8035 WASTE TONER BOTTLE
FK3-4030 HEATER, MAIN (7095/7105) FL3-7878 ADF SEP PAD
FH7-4712 HEATER, SUB (7086) FM4-7732 ADF P/U ROLLER ASSY
FH7-4724 HEATER, SUB (7095/7105) FK4-0281 HDMI CABLE INTERFACE
FH7-7464 SUB THERMISTOR ASSY PCB’s
FH7-7553 MAIN THERMISTOR ASSY FM1-A510 HDD
FG6-7745 THERMOSWITCH ASSY FM1-C271 MAIN CONTROLLER (400)
FH7-4709 HEATER, MAIN (H1) (7086) FM1-C272 MAIN CONTROLLER (500)
FH7-4712 HEATER, SUB (H2) (7086) FM1-A958 ENGINE CONTROLLER ASSY
FK3-4030 HEATER, MAIN (H1) (7095/7105) FM1-A709 POWER SUPPLY UNIT
FH7-4724 HEATER, SUB (H2) (7095/7105) FM1-U829 CONTROL PANEL CPU PCB ASS'Y
Paper Feed
FF5-7829 PICK-UP ROLLER (DECK/CASS)
FF5-7830 PICK-UP ROLLER (DECK/CASS)
FB6-0615 FEED ROLLER (DECK/CASS)
iR ADVANCE 525,615,715 FM1-G853 ENGINE CONTROL’R (DC CON) (4235/45)
Image Process FM1-G854 ENGINE CONTROL’R (DC CON) (4251)
2725C001AA DRUM/TONER CARTRIDGE FM1-N844 ENGINE CONTROL’R (45XX MK1/2)
(A CONSUMABLE NOT ORDEREABLE BY AN ENGINEER) FM2-J877 ENGINE CONTROLLER (45XX MK3)
FM1-U032 TRANSFER ROLLER FM4-9726 MAIN CONTROLLER 1 (4051)
Fixing FM4-9727 MAIN CONTROLLER 1 (4045)
FM1-U028 FIXING ASSEMBLY FM4-9728 MAIN CONTROLLER 1 (4035)
Paper Feed FM4-9729 MAIN CONTROLLER 1 (4025)
FM1-U030 ROLLER KIT FM4-7908 MAIN CONTROLLER 2 (4035/45/51)
Sundries FM4-7909 MAIN CONTROLLER 2 (4025)
FM1-P720 ADF MAINTENANCE KIT FM4-7615 HV PCB ASSY (40/42XX)
PCB’s FM1-E351 MAIN CONTROLLER 1 (4251)
FK4-1550 HDD FM1-E352 MAIN CONTROLLER 1 (4245)
FM1-U718 MAIN CONTROLLER 715 SERIES FM1-E353 MAIN CONTROLLER 1 (4235)
FM1-U719 MAIN CONTROLLER 615 SERIES FM1-E354 MAIN CONTROLLER 1 (4225)
FM1-U720 MAIN CONTROLLER 525 SERIES FM1-E355 MAIN CONTROLLER 2 (4235/45/51)
FM1-R118 DC CONTROLLER FM1-E356 MAIN CONTROLLER 2 (4225)
FM1-R125 LOW VOLTAGE PSU 4Y8-3113 MAIN CONTROLLER (4551 MK1/2)
RM2-9337 HIGH VOLTAGE PSU FM1-V548 MAIN CONTROLLER (4551 MK3)
4Y8-3114 MAIN CONTROLLER (4545 MK1/2)
FM1-V549 MAIN CONTROLLER (4545 MK3)
iR ADVANCE 40XX/42XX/45XX 4Y8-3115 MAIN CONTROLLER (4535 MK1/2)
Image Process FM1-V550 MAIN CONTROLLER (4535 MK3)
4793B003AA DRUM UNIT (40/42XX) 4Y8-3116 MAIN CONTROLLER (4525 MK 1/2)
0475C002AA DRUM UNIT (45XX) FM1-V551 MAIN CONTROLLER (4525 MK3)
FM4-9730 DEV ASSY (40/42XX) FM4-9739 CONTROL PANEL CPU PCB (40XX)
FM1-J148 DEV ASSY (45XX) FM1-V915 CONTROL PANEL CPU PCB (42XX)
FC9-0693 TRANSFER ROLLER (40/42XX) } FIT FM1-X896 CONTROL PANEL CPU PCB (45XX)
FE8-2935 TRANSFER ROLLER (45XX) } AS A
FM3-9296-010 STATIC ELIMINATOR } PAIR
Fixing iR ADVANCE 60XX/62XX/65XX
FM4-9737 FIXING ASSY, MAIN (40-4225/35/45) Image Process
FM4-9734 FIXING ASSY, MAIN (40-4251) 3765B002AA DRUM
FM1-J024 FIXING ASSY, MAIN (4525/35/45) FL3-4558 PRIMARY WIRE ASSY (WIRE)
FM1-J021 FIXING ASSY, MAIN (4551) FY1-0883 PRIMARY GRID WIRE
FM4-7901 FIXING FILM ASSY (40-4225/35/45) FL2-4271 BLOCK, PRI/P-TRANS WIRE (60/62XX)
FM4-7898 FIXING FILM ASSY (40-4251) FL2-2720 HOLDER, PRI/P-TRANS WIRE (60/62XX)
FM1-J039 FIXING FILM ASSY (4525/35/45) FL2-7750-010 BLOCK, PRI/P-TRANS WIRE (65XX)
FM1-J036 FIXING FILM ASSY (4551) FL3-7560 HOLDER, PRI/P-TRANS WIRE (65XX)
FC9-8974 LFR (ALL) FL3-4559 PRE-TRANS WIRE ASSY
XG9-0172 LFR BEARINGS (x2) (40/42XX) FL3-6291 DC BLADE
XG9-0875 LFR BEARINGS (x2) (45XX) FM4-5397-010 AP KIT ASSY
Paper Feed FM3-7384-010 DEV ASSY
FB6-3405 CASS P/U ROLLER FC8-7160 E.T. BELT
FC0-5080 CASS FEED ROLLER FC8-7159 TRANSFER ROLLER
FC6-6661 CASS SEP ROLLER XG9-0774 TRANSFER ROLLER BEARINGS (x2)
FL3-1352 MULTI FEED P/U ROLLER FC6-1647 ETB CLEANING BLADE
FL3-3469 MULTI FEED SEP PAD FC8-7175 ETB CLEANING BRUSH ROLLER
Sundries FM4-0913-010 ETB CLEANING ASSY
FM3-9276-010 WASTE TONER BOX FM3-7526-010 LASER ASSY
FC0-3078 AIR FILTER (x2) Fixing
DADF FY1-1157 WEB
FM1-D470 P/U ROLLER ASSY FM0-3465-030 FIXING ROLLER SET (INC BUSHES,
FM1-D471 SEP ROLLER THRUST RETAINER & SPACER)
PCB’s FM4-3160 LFR UNIT (INC BEARINGS)
FK4-1729 HDD (40/42XX) XG9-0563 UFR BEARINGS (x2)
FK4-1550 HDD (45XX) FU8-0505 UFR FRONT DRIVE GEAR
FM4-8596 ENGINE CONTROL’R (DC CON) (4025) FB5-3625 UPPER SEP CLAW (x6)
FM4-8597 ENGINE CONTROL’R (DC CON) (4035/45) FM3-7359 FIXING HEATER UNIT
FM4-8598 ENGINE CONTROL’R (DC CON) (4051) FK2-7683 MAIN THERMISTOR ASSY (THM1&3)
FM1-G852 ENGINE CONTROL’R (DC CON) (4225) FK2-7693 SUB THERMISTOR ASSY (THM2)
FK2-7698 THERMOSWITCH ASSY (TP1) FL3-6291 DC BLADE
FM2-4169 FIXING KNOB UNIT FM3-7291 AP KIT ASSY
Paper Feed FM4-5429 DEV ASSY
FC5-2524 P/U ROLLER (CASS & DECK) FC8-7160 E.T. BELT
FC5-2526 FEED ROLLER (CASS & DECK) FC8-7159 TRANSFER ROLLER
FC5-2528 SEP ROLLER (CASS & DECK) XG9-0774 TRANSFER ROLLER BEARINGS (x2)
FB1-8581 MULTI FEED P/U ROLLER FC6-1647 ETB CLEANING BLADE
FC6-6661 MULTI FEED SEP ROLLER FC8-7175 ETB CLEANING BRUSH ROLLER
FC9-3989 DECK REAR FLANGE FM4-0913 ETB CLEANING ASSY
FC9-8565 DECK FRONT FLANGE FM3-7531-010 LASER ASSY
FF5-7829-030 P/UP ROLLER (BOTH S/DECK) Fixing
FF5-7830-030 P/UP ROLLER (BOTH S/DECK) FC5-2286 WEB
FF6-1975-010 FEED ROLLER (BOTH S/DECK) FL3-3602 UFR
FB2-7777-020 SEP ROLLER (BOTH S/DECK) FM4-3158 LFR UNIT (INC BEARINGS)
DADF FC9-8067 BUSHING SPACER
FL3-7266 P/U ROLLER FM1-C081-010 UFR BUSHES (x2)
FB2-7777-020 SEP ROLLER FE2-0550 UFR BUSHING SPACER
FL2-9608 FEED ROLLER XG9-0563 UFR BEARINGS (x2)
Sundries FC6-3673 UFR BEARING RETAINERS
FL3-2134 OZONE FILTER (6 Mil) FU8-0505 UFR FRONT DRIVE GEAR
XZ9-0379 REAR SIDE COVER LATCH FC6-3501-020 UFR THRUST RETAINER (x2)
FC8-9564 AIR FILTER FB5-3625 UPPER SEP CLAW (x6)
PCB’s FM4-5160 FIXING HEATER ASSY
FK4-1729 HDD (60/62XX) FK2-7692 MAIN THERMISTOR ASSY (THM1)
FK4-1550 HDD (65XX) FK2-7693 SUB THERMISTOR ASSY (THM2&4)
FH7-7625-030 RCD FK2-7698 THERMOSWITCH ASSY (TP1)
FM4-5300-010 MAIN CONTROLLER1 (6055) FK2-7679 THERMOSWITCH ASSY (TP2)
FM4-5301-010 MAIN CONTROLLER1 (6065) FM2-4169 FIXING KNOB UNIT
FM4-5302-010 MAIN CONTROLLER1 (6075) Paper Feed
FM3-9213 MAIN CONTROLLER2 (60XX) FC5-2524 P/U ROLLER (CASS & DECK)
FM4-1104 DC CONTROLLER (60XX) FC5-2526 FEED ROLLER (CASS & DECK)
FM4-2500 MAIN CONTROLLER1 (6255) FC5-2528 SEP ROLLER (CASS & DECK)
FM4-2501 MAIN CONTROLLER1 (6265) FB1-8581 MULTI FEED P/U ROLLER
FM4-2517 MAIN CONTROLLER1 (6275) FC6-6661 MULTI FEED SEP ROLLER
FM4-2497 MAIN CONTROLLER2 (62XX) FC9-3989 DECK REAR FLANGE
FM0-4158 DC CONTROLLER (62XX) FC9-8565 DECK FRONT FLANGE
FM1-K345 MAIN CONTROLLER1 (6555 MK1/2) FF5-7829-030 P/UP ROLLER (S/DECK/POD DECK)
FM1-W580 MAIN CONTROLLER1 (6555 MK3) FF5-7830-030 P/UP ROLLER (S/DECK/POD DECK)
FM1-K344 MAIN CONTROLLER1 (6565 MK1/2) FF6-1975-010 FEED ROLLER (S/DECK/POD DECK)
FM1-W579 MAIN CONTROLLER1 (6565 MK3) FB2-7777-020 SEP ROLLER (S/DECK/POD DECK)
FM1-K343 MAIN CONTROLLER1 (6575 MK1/2) DADF
FM1-W578 MAIN CONTROLLER1 (6575 MK3) FL3-7266 P/U ROLLER
FM1-M962 MAIN CONTROLLER2 (65XX) FB2-7777-020 SEP ROLLER
FM1-J712 DC CONTROLLER (65XX MK1/2) FL2-9608 FEED ROLLER
FM1-W171 DC CONTROLLER (65XX MK3) Sundries
FM4-1099 FIXING HEATER PSU ASSY FL3-2134 OZONE FILTER (6 Mil)
FM3-7994 CONTROL PANEL CPU PCB (60XX) FY9-6026-000 MOLYKOTE G8022 GREASE
FM4-9880 CONTROL PANEL CPU PCB (62XX) (HEAT/PRESSURE ONLY)
FM1-T858 CONTROL PANEL CPU PCB (65XX) PCB’s
FK4-1729 HDD (80/82XX)
iR ADVANCE 80XX/82XX/85XX FK4-1550 HDD (85XX)
Image Process FH7-7625-030 RCD
3765B002AA DRUM FM4-5303 MAIN CONTROLLER1 (8085)
FL3-4558 PRIMARY WIRE ASSY (WIRE) FM4-5304 MAIN CONTROLLER1 (8095)
FY1-0883 PRIMARY GRID WIRE FM4-5305 MAIN CONTROLLER1 (8105)
FL2-4271 BLOCK, PRI/P-TRANS WIRE (80/82XX) FM3-9213 MAIN CONTROLLER2 (80XX)
FL2-2720 HOLDER, PRI/P-TRANS WIRE (80/82XX) FM4-1105 DC CONTROLLER (80XX)
FL2-7750-010 BLOCK, PRI/P-TRANS WIRE (85XX) FM4-2518 MAIN CONTROLLER1 (8285)
FL3-7560 HOLDER, PRI/P-TRANS WIRE (85XX) FM4-2519 MAIN CONTROLLER1 (8295)
FL3-4559 PRE-TRANS WIRE ASSY FM4-2520 MAIN CONTROLLER1 (8205)
FM4-2497 MAIN CONTROLLER2 (82XX)
FM0-4159 DC CONTROLLER (82XX)
FM1-K342 MAIN CONTROLLER1 (85XX MK1/2)
FM1-W577 MAIN CONTROLLER1 (85XX MK3)
FM1-M962 MAIN CONTROLLER2 (85XX)
FM1-H199 DC CONTROLLER (85XX MK1/2)
FM1-W170 DC CONTROLLER (85XX MK3)
FM3-4813 CONTROL PANEL CPU PCB (80XX)
FM4-9880 CONTROL PANEL CPU PCB (82XX)
FM1-T858 CONTROL PANEL CPU PCB (85XX)
SMART COLOUR
iR23/28/30/33/3580C
Image Process
0456B002BA DRUM/DEV ASSY BLACK
0457B002BA DRUM/DEV ASSY CYAN
0458B002BA DRUM/DEV ASSY MAGENTA
0459B002BA DRUM/DEV ASSY YELLOW
FM2-5522-030 ITB ASSY
FM2-5523 ITB CLEANER ASSY
Fixing
FM2-9987 FIXING ASSY
FM3-1994 FIXING FILM ASSY
FC7-6981 LFR
FC5-7182 LFR BUSHES
XG9-0172 LFR BEARINGS
FC7-2395 DELIVERY ROLLER (RED)
FU5-1559 DELIVERY ROLLER BUSHES (x2)
Paper Feed
FB6-3405 CASS P/U ROLLER
FC0-5080 CASS FEED ROLLER
FC6-6661 CASS SEP ROLLER
FM2-0141-020 CASSETTE UPPER
FM2-0142-020 CASSETTE LOWER
RH7-7129 OHT SENSOR
FC5-0484 PRE-REG SENSOR ARM
FL2-4520 PRE-REG SENSOR ARM (INC METAL PLATE)
Sundries
FM2-5533 WASTE TONER BOTTLE
FC6-9380-010 MOD CABLE GUIDE (FOR E025)
FM3-1296 LOWER DOOR
FM3-1297 INNER LWR DOOR ASSY (BLACK GUIDE)
PCB’s
FK4-0995 HDD (SATA TYPE)
FY7-0422 SATA SET (WITHOUT ENCRYTION)
FH7-7625-030 RCD (ALL M/C’s)
FM2-5612-010 CONTROL PANEL ASSY
FM2-8263 DC CONTROLLER (28/3380)
FM2-8281 DC CONTROLLER (23/30/3580)
FM2-9163-010 MAIN CONTROLLER (ALL M/C’s)
COLOUR
iRC4040/4080/4580/5151/5185 iR C1225/1325/35iF
0255B002AA DRUM UNIT YELLOW 8520B002AA DRUM UNIT BLACK
0256B002AB DRUM UNIT MAGENTA 8521B002AA DRUM UNIT CYAN
0257B002AA DRUM UNIT CYAN 8522B002AA DRUM UNIT MAGENTA
0258B002AA DRUM UNIT BLACK 8523B002AA DRUM UNIT YELLOW
FM2-5365-010 ITB ASSY FM1-A153-010 ITB ASSY
FC7-0091 ITB BELT FM1-C318 2ND TRANS OUTER ROLLER ASSY
FM3-5438 ITB MOD KIT FM0-0144 LASER UNIT
FU7-0406 ITB DRIVE GEAR Fixing
FG6-8989 ITB CLEANER ASSY FM0-0073 FIXING ASSY
FC7-2747 ITB DRIVE ROLLER FM1-C340 FIXING FILM ASSY
FC7-4811 PRI TRANS ROLLER FM1-K198 PRESSURE ROLLER KIT (LFR)
FB6-2934 2ND TRANS ROLLER (ITB) Paper Feed
FC7-0090 2ND TRANS ROLLER (OUTSIDE) FL0-1011 ALL CASS P/U & FEED ROLLERS
FM2-7475 2ND TRANS ROLLER UNIT (OUTSIDE) FL0-1674 ALL CASS SEP ROLLER
FM2-5375 2ND TRANSFER ASSY FL0-1011 MULTI FEED P/U & FEED ROLLER
Fixing FL0-1674 MULTI FEED SEP ROLLER
FM3-3779 FIXING ASSY FM1-D694 CASSETTE
FU7-0742 BELT MOTOR GEARS (x2) Sundries
FC7-9751 FUSER COVER (BLACK) FM0-0015 WASTE TONER BOTTLE
FM2-7472 FIXATION STAY UNIT FL0-0237 LASER CLEANING ROD
Paper Feed DADF
FB6-3405 CASS P/U ROLLER FM4-9857 ADF SEP PAD
FC0-5080 CASS FEED ROLLER FM4-9859 ADF P/U ROLLER ASSY
FC6-6661 CASS SEP ROLLER PCB’s
FB1-8581 MULTI FEED, FEED ROLLER FM1-M802 DC CONTROLLER
FB5-0873 MULTI FEED, SEP ROLLER FM1-J785 MAIN CONTROLLER (1335iF)
FM2-5389 MULTI FEED ASSY FM1-J786 MAIN CONTROLLER (1225(iF)/1325(iF))
FM2-8204 PAPER P/U ASSY
FL3-8032 CASSETTE REGISTRATION FLAGS iR ADVANCE C250/350/351iF/255/355/256/356
FG6-9044 CASSETTE Image Process
FM4-5908 P/D Y1 P/U ASSY 8520B002AA DRUM UNIT BLACK (250/350/351/255/355)
Sundries 8521B002AA DRUM UNIT CYAN (250/350/351/255/355)
FM2-5676 DUPLEX UNIT 8522B002AA DRUM UNIT MAGENTA (250/350/351/255/355)
FM2-5364 DELIVERY VERTICAL PATH ASSY 8523B002AA DRUM UNIT YELLOW (250/350/351/255/355)
FM2-8180 VERTICAL PATH PANEL ASSY 2186C002AA DRUM UNIT BLACK (256/356)
FM2-7442 EXTERNAL DELIVERY DOOR 2187C002AA DRUM UNIT CYAN (256/356)
RB1-6484 DELIVERY DOOR STRAP PLUS } 2188C002AA DRUM UNIT MAGENTA (256/356)
FB6-3887 CLIP FOR DELIVERY DOOR STRAP } 2189C002AA DRUM UNIT YELLOW (256/356)
FM2-5383 WASTE TONER BOTTLE FM1-A153-020 ITB ASSY
FM2-5385 ITB CLEANER SCREW ASSY FM1-C318-010 2ND TRANS OUTER ROLLER ASSY
RH7-6037 INTERLOCK SWITCHES (MSW5&6) (250/350/351/255/355)
PCB’s FM1-U036 2ND TRANS OUTER ROLLER ASSY (256/356)
HDD (SATA TYPE, 3.5INCH) FM0-0144 LASER UNIT
FY7-0422 SATA SET (W/O ENCRYPTION) Fixing
FL3-4286 HDD (FIERY H1) FM1-C340 FIXING FILM ASSY (250/350/351/255/355)
FH7-7625-030 RCD FM1-R730 FIXING FILM ASSY (256/356)
FM1-K198-010 PRESSURE ROLLER KIT (ALL)
Paper Feed
FL0-2885 CASS P/U ROLLERS (ALL)
FL0-4002 CASS FEED ROLLERS (ALL)
FL0-1674 CASS SEP ROLLER (ALL)
FM1-P088 MULTI FEED P/U ROLLER SET (ALL)
FL0-4002 MULTI FEED FEED ROLLER (ALL)
FL0-1674 MULTI FEED SEP ROLLER (ALL)
FL3-6526 SEPARATION SHEET (255/355)
FM0-0019 CASSETTE (250/350/351)
FM1-D694-010 CASSETTE (255/355)
DADF RM1-6163-040 MULTI FEED SEP PAD KIT
FM4-9857 ADF SEP PAD (250/350/351) Sundries
FM4-9859 ADF P/U ROLLER ASSY (250/350/351) FM3-8137-010 WASTE TONER BOTTLE
FM1-N521 ADF SEP ROLLER UNIT (255/355/256/356) PCB’s
FM1-L782 ADF P/U ROLLER ASSY (255/355/256/356) FK4-1729 HDD (HDD MODEL ONLY)
Sundries FM3-8600 DC CONTROLLER (20XX)
FM0-0015 WASTE TONER BOTTLE FM0-1905 DC CONTROLLER (22XX)
PCB’s FM4-3139-010 MAIN CONTROLLER 1 (2020)
FK4-1550 HDD FM4-3140-010 MAIN CONTROLLER 1 (2025)
FM1-C743 DC CONTROLLER FM4-3141-010 MAIN CONTROLLER 1 (2030)
FM2-J907 DC CONTROLLER – MK 3 FM4-3138 MAIN CONTROLLER 2 (20XX ALL)
FM1-G966 MAIN CONTROLLER (C250) FM0-2662 MAIN CONTROLLER 1 (2220)
FM1-G964 MAIN CONTROLLER (C350) FM0-2663 MAIN CONTROLLER 1 (2225)
FM1-M894 MAIN CONTROLLER (C351) FM0-2661 MAIN CONTROLLER 1 (2230)
FM1-P026 MAIN CONTROLLER (C255i/iF) FM0-2667 MAIN CONTROLLER 2 (22XX ALL)
FM1-P027 MAIN CONTROLLER (C355i/iF/P) FM3-8181 AC DRIVER (20XX)
FM1-R757 MAIN CONTROLLER (C256/i/iF) FM0-1663 AC DRIVER (22XX)
FM1-V648 MAIN CONTROLLER (C256/i/iF) MK 3 FM3-8179 LOW VOLTAGE PSU
FM1-R758 MAIN CONTROLLER (C356i/iF/P) FM3-8175 HVT
FM1-V649 MAIN CONTROLLER (C356/i/If/P) MK 3 FM3-8610 2nd HVT
FM1-D941 CONTROL PANEL CPU PCB (250/350/351) FM4-2183 CONTROL PANEL CPU PCB (20XX)
FM1-X811 CONTROL PANEL CPU PCB (255/355/256/356) FM1-R848 CONTROL PANEL CPU PCB (22XX)
iR ADVANCE C22XX/20XX iR ADVANCE C33XX/35XX

3786B003BA DRUM UNIT BLACK 8528B003AA DRUM UNIT (ALL COLOURS / MODELS)
3787B003BA DRUM UNIT CYAN FM1-B264 DEV UNIT Y
3788B003BA DRUM UNIT MAGENTA FM1-B265 DEV UNIT M
3789B003BA DRUM UNIT YELLOW FM1-B266 DEV UNIT C
FM1-F555 IT BELT ASSY (NEW TYPE) FM1-B267 DEV UNIT BK
RM1-7928 2ND TRANS ROLLER ASSY FM1-A605 ITB ASSY
FE2-2109 BUSHING, 2nd LOCK LEVER (REAR) FL0-0222 ITB BELT
RC2-7246 BUSHING, 2nd LOCK LEVER (FRONT) FM1-B271 CLEANING ASSY
FU9-2530 SPRING (2nd TRANS GUIDE) FE3-4783 2ND TRANS OUTER ROLLER ASSY
RL1-2235 2nd TRANS LOCKING ARM (FRONT) FM1-D175 LASER UNIT
RL1-2236 2nd TRANS LOCKING ARM (REAR) Fixing
FM3-8074 LASER UNIT FM1-D277 FIXING ASSY
Fixing FM1-D281 FIXING FILM ASSY
FM1-B291 FIXING FILM ASSY FM1-K441 LOWER PRESSURE ROLLER KIT
RU6-0710 21T/15T GEAR Paper Feed
RU6-0711 35T GEAR FL0-4002 ALL CASS P/U ROLLERS
RC2-6506 LOWER FIXING COVER FL0-2885 ALL CASS FEED ROLLERS
FM4-7712-010 FIXING DELIVERY GUIDE (2nd/3rd FL0-1674 ALL CASS SEP ROLLER
DELIVERY MODEL) FL0-4002 MULTI FEED P/U & FEED ROLLER
FM4-7713 FIXING DELIVERY GUIDE (EXCEPT 2nd/3rd FL0-1674 MULTI FEED SEP ROLLER
DELIVERY MODEL) DADF
Paper Feed FM1-D470 ADF P/U ROLLER ASSY
FL3-0777 COMPENSATION SHEET (FRONT) } FM1-D471 ADF SEP ROLLER ASSY
FL3-0778 COMPENSATION SHEET (REAR) } Sundries
FC8-8590-010 STATIC ELIMINATOR } FM1-A606 WASTE TONER BOTTLE
FC0-0598-010 2ND DELIVERY ENTRANCE GUIDE } PCB’s
RM1-6035 UPPER CASS P/U ROLLER ASSY (20XX) FK4-1550 HDD
FM4-8108 UPPER CASS SEP ROLLER ASSY (20XX) FM1-D804 DC CONTROLLER (33XX)
FM0-3173 UPPER CASS P/U ROLLER ASSY (22XX) FM1-X932 DC CONTROLLER (35XX)
FM0-1657-010 UPPER CASS SEP ROLLER ASSY (22XX FM2-F951 DC CONTROLLER (35XX) MK 3
THIS IS CORRECT OPTION FOR UK) FM1-G727 MAIN CONTROLLER (C3330)
FB6-3405 LOWER CASS P/U ROLLER FM1-G728 MAIN CONTROLLER (C3325)
FC0-5080 LOWER CASS FEED ROLLER FM1-G729 MAIN CONTROLLER (C3320)
FC6-6661 LOWER CASS SEP ROLLER FM1-P535 MAIN CONTROLLER (C3530)
RL1-2244 MULTI FEED P/U ROLLER FM1-U795 MAIN CONTROLLER (3530F/i) MK 3
FM1-P536 MAIN CONTROLLER (C3525) FC0-5080 CASS FEED ROLLER (50/52XX)
FM1-U794 MAIN CONTROLLER (C3525/i) MK 3 FC6-6661 CASS SEP ROLLER (50/52XX)
FM1-P537 MAIN CONTROLLER (C3520) FL0-4002 CASS P/U ROLLER (55XX)
FM1-U793 MAIN CONTROLLER (C3520F/i) MK 3 FL0-2885 CASS FEED ROLLER (55XX)
FM1-B842 CONTROL PANEL CPU PCB (C33XX) FL0-1674 CASS SEP ROLLER(55XX)
FM1-X896 CONTROL PANEL CPU PCB (C35XX) FB1-8581 MULTI FEED P/U ROLLER (50/52XX)
FC6-6661 MULTI FEED SEP ROLLER (50/52XX)
iR ADVANCE C50XX/52XX/55XX FL0-4002 MULTI FEED P/U & FEED ROLLER (55XX)
Image Process FL0-1674 MULTI FEED SEP ROLLER (55XX)
2776B003BA DRUM 5255/50/5051/45 BLACK FM3-5936 CASSETTE, UPPER (50/52XX)
2777B003BA DRUM 5255/50/5051/45 COLOUR FM3-5937 CASSETTE, LOWER (50/52XX)
2778B003BA DRUM 5240/35/5035/30 BLACK FM1-G581 CASSETTE, UPPER (55XX)
2779B003BA DRUM 5240/35/5035/30 COLOUR FM1-G582 CASSETTE, LOWER (55XX)
0488C002BA DRUM 55XX ALL WG8-5783 NEW TYPE SENSOR (PS39/40)
FM4-8351-010 DEV ASSY 52XX/50XX Y FC0-3735 PS39 FLAG LIMIT SHEET
FM4-8352-010 DEV ASSY 52XX/50XX M FC0-2118-010 REG SENSOR DAMPER SHEET
FM4-8353-010 DEV ASSY 52XX/50XX C DADF
FM4-8354-010 DEV ASSY 52XX/50XX BK FL0-3873 P/U ROLLER
FM1-N370 DEV ASSY 55XX Y FC0-9450 FEED ROLLER
FM1-N371 DEV ASSY 55XX M FC0-9631 SEP ROLLER
FM1-N372 DEV ASSY 55XX C Sundries
FM1-N373 DEV ASSY 55XX BK FM4-8400 WASTE TONER BOTTLE (50/52XX)
FC0-3696 DEV COUPLING (DRIVE GEAR) PLUS } FM1-A606-030 WASTE TONER BOTTLE (55XX)
XD9-0289 DEV COUPLING RETAINING PIN } FC6-9817 TONER FILTER (REAR) (100K)
FM4-7241 IT BELT (50/52XX) FM3-6064-010 FRONT DOOR LH HINGE
FM4-8410-010 ITB SKELETON KIT FM3-8934 FRONT DOOR RH HINGE
FM4-8409 ITB IMPROVEMENT KIT FM3-5968 LASER GLASS CLEANING ROD ASSY
FC0-0257-010 PRI TRANS ROLLER (x4) FL2-9476-010 LASER GLASS CLEANING PAD
FC0-3762 2ND TRANS ROLLER (INNER) (50/52XX) PCB’s
FC8-4876 2ND TRANS ROLLER (OUTSIDE) (50XX) FM4-3866 HDD 50XX (160Gb replacement for old 80Gb)
FC0-4878 2ND TRANS ROLLER (OUTSIDE) (52XX) FM0-0318 HDD 52XX
FM1-N265 IT BELT (55XX) FK4-1550 HDD 55XX
FL0-4164 2ND TRANS ROLLER (INNER) (55XX) FL3-4286 HDD (imagePASS B1)
FE4-8322 2ND TRANS ROLLER (OUTSIDE) (55XX) FE1-6396 HDD (imagePASS B2)
FM4-7246-010 ITB CLEANER BLADE (ALL) FH7-7625-030 RCD
FM4-7244-010 ITB CLEANING ASSY (50/52XX) FM4-0738 B1 OPEN INTERFACE PCB
FM1-G370 ITB CLEANING ASSY(55XX) FM3-7931 DC CONTROLLER (50XX)
FC8-4394 ITB RACKING HANDLE FM4-9390 DC CONTROLLER (52XX)
FC8-4540 SHUTTER, PATCH SENSOR FM1-V980 DC CONTROLLER (55XX MK1/2)
FM3-5944-010 PATCH SENSOR UNIT (50/52XX) FM2-J977 DC CONTROLLER (55XX MK 3)
FM1-G456 PATCH SENSOR UNIT (55XX) FM4-3830-020 MAIN CONTROLLER 1 (5051)
FM3-8902-010 PATCH SENSOR SOLEN’D ASSY (50/52XX) FM4-3831-020 MAIN CONTROLLER 1 (5045)
FM0-1021 LASER UNIT (5255/50) FM4-3832-020 MAIN CONTROLLER 1 (5035)
FM3-5420-020 LASER UNIT (5045/51) FM4-3833-020 MAIN CONTROLLER 1 (5030)
FM3-5425-020 LASER UNIT (5240/35/5035/30) FM4-3838 MAIN CONTROLLER 2 (50XX ALL)
FM1-G395 LASER UNIT (55XX) FM0-0350 MAIN CONTROLLER 1 (5255)
FM4-8390 DRUM/DEV DRIVE ASSY (50XX) FM0-0351 MAIN CONTROLLER 1 (5250)
Fixing FM0-0352 MAIN CONTROLLER 1 (5240)
FM3-5951-010 FIXING FILM ASSY (50/52XX) FM0-0353 MAIN CONTROLLER 1 (5235)
FM1-N255 FIXING FILM ASSY (55XX) FM0-0339 MAIN CONTROLLER 2 (52XX ALL)
FC0-5061 LOWER FUSER ROLLER (50/52XX) FM1-W955 MAIN CONTROLLER (5560 MK1/2)
XG9-0172 BEARINGS (x2) (50/52XX) FM1-V522 MAIN CONTROLLER (5560 MK3)
FM1-N252 LOWER FUSER ROLLER KIT (55XX) FM1-W954 MAIN CONTROLLER (5550 MK1/2)
FC8-5043 FIXING SEPARATION GUIDE FM1-V521 MAIN CONTROLLER (5550 MK3)
FC6-9471 LEAF SPRINGS, FIXING SEP GUIDE FM1-W953 MAIN CONTROLLER (5540 MK1/2)
FC7-2395 PAPER DELIVERY ROLLER FM1-V520 MAIN CONTROLLER (5540 MK3)
FU5-1559 PAPER DEL’Y ROLLER BUSHES (50/52XX) FM1-W952 MAIN CONTROLLER (5535 MK1/2)
FU6-1269 PAPER DEL’Y ROLLER BUSHES (55XX) FM1-V519 MAIN CONTROLLER (5535 MK3)
Paper Feed FM3-7994 CONTROL PANEL CPU PCB (50XX)
FB6-3405 CASS P/U ROLLER (50/52XX) FM1-U976 CONTROL PANEL CPU PCB (52XX)
FM1-T858 CONTROL PANEL CPU PCB (55XX)
iR ADV C70XX/72XX/75XX/90XX/92XX FK2-7885 HALOGEN HEATER (H5)
Image Process Fixing (72/75/92XX)
2780B002AA DRUM BLACK (70/90/72/92XX) FM0-1299 HEATER UNIT (72/92XX)
2781B003AA DRUM COLOUR (70/90XX) FM1-P110 HEATER UNIT (75XX)
6370B003AA DRUM COLOUR (72/92XX) FM0-0413 FIXING FILM ASSY (72/92XX)
1110C002AA DRUM BLACK (75XX) FM1-N742 FIXING FILM ASSY (75XX)
1111C002AA DRUM COLOUR (75XX) FC0-7967 ROLLER, HEAT
FM4-6612-010 DEV ASSY Y (70/90XX) XG9-0810 HEAT ROLLER BEARINGS (x2) (72/92XX)
FM4-6613-010 DEV ASSY M (70/90XX) XG9-0876 HEAT ROLLER BEARINGS (x2) (75XX)
FM4-6614-010 DEV ASSY C (70/90XX) FM0-0387-010 LWR PRESSURE ROLLER UNIT
FM4-6615-010 DEV ASSY BK (70/90XX) FH7-7586-020 THERMISTER UNIT (THM16)
FM0-2706 DEV ASSY Y (72/92XX) FC0-8030 FIXING CLEANING WEB
FM0-2707 DEV ASSY M (72/92XX) Paper Feed
FM0-2708 DEV ASSY C (72/92XX) FC5-2524 P/U ROLLER (CASS/DECK) (70/72/90/92XX)
FM0-2709 DEV ASSY BK (72/92XX) FC5-2526 FEED RLR (CASS/DECK) (70/72/90/92XX)
FM1-P089 DEV ASSY Y (75XX) FC5-2528 SEP ROLLER (CASS/DECK) (70/72/90/92XX)
FM1-P090 DEV ASSY M (75XX) FL0-4500 P/U ROLLER (CASS/DECK/SIDE/POD) (75XX)
FM1-P091 DEV ASSY C (75XX) FC0-9450 FEED ROLLER (CASS/DECK/SIDE/POD) (75XX)
FM1-P092 DEV ASSY BK (75XX) FC0-9631 SEP ROLLER (CASS/DECK/SIDE/POD) (75XX)
FC8-2281 BK DRUM CLEANING BLADE FB1-8581 MULTI FEED P/U ROLLER (70/72/90/92XX)
FM3-4837 BK PROCESS ASSY FC6-6661 MULTI FEED SEP ROLLER (70/72/90/92XX)
FL2-8915 PRIMARY WIRE ASSY (WIRE) FL1-3427 MULTI FEED P/U ROLLER (75XX)
FC8-2295 PRIMARY GRID (70/90/72/92XX) FC0-9631 MULTI FEED SEP ROLLER (75XX)
FC0-9857 PRIMARY GRID (75XX) FL1-3428 MULTI FEED FEED ROLLER (75XX)
FL2-4271 BLOCK, PRI/PT WIRE PAD (70/90XX) FF5-7829-030 P/U ROLLER (S/D /POD DECK) (70/72/90/92XX)
FL2-2720 HOLDER, PRI/PT WIRE PAD (70/90XX) FF5-7830-030 P/U ROLLER (S/D /POD DECK) (70/72/90/92XX)
FL2-7750-010 BLOCK, PRI/PT WIRE PAD (72/75/92XX) FF6-1975-010 FEED ROLLER (S/D /POD DECK)(70/72/90/92XX)
FL3-7560 HOLDER, PRI/PT WIRE PAD (72/75/92XX) FB2-7777-020 SEP ROLLER (S/D /POD DECK) (70/72/90/92XX)
FL3-4090 SLIDER PAD (ALL) FM3-4746 CASSETTE (70/72/90/92XX)
FL2-8807 PRE-TRANS WIRE ASSY FM1-L236 CASSETTE (75XX)
FM4-6624 IT BELT (70/72/90/92XX) DADF
FM1-P695 IT BELT (75XX) FL3-7266 P/U ROLLER (75XX)
FL3-4920 ITB CLEANING BLADE SET FL2-9608 FEED ROLLER (75XX)
FC0-2331 PRI TRANSFER ROLLER (x4) FB2-7777-020 SEP ROLLER (75XX)
FL3-9149 ITB INTERNAL SCRAPER (70/72/90/92XX) Sundries
FL1-2173 ITB INTERNAL SCRAPER (75XX) FL3-4101 OZONE (x2) (500K) (70/72/90/92XX)
FC7-9325 2ND TRANS ROLLER (INNER) (ALL) FL3-7553 AIR FILTER (REAR) (70/72/90/92XX)
FC9-0386 2ND TRANS ROLLER (OUTSIDE) (70/90XX) FL2-0439 AIR FILTER (RHS) (70/72/90/92XX)
FL3-8693 2ND TRANS ROLLER (OUTSIDE) (72/92XX) FL0-7930 OZONE (x2) (600K) (75XX)
FE8-0387 2ND TRANS ROLLER (OUTSIDE) (75XX) FL0-7931 AIR FILTER (REAR) (75XX)
FM3-5005 LASER UNIT BK (70/72/90/92XX) FL2-0439 AIR FILTER (RHS) (75XX)
FM3-5000 LASER UNIT COLOUR (70/72/90/92XX) UK-PART-042 15A MAINS LEAD (7280/7580/9280 ONLY)
FM1-L151 LASER UNIT BK (75XX) PCB’s
FM1-L152 LASER UNIT COLOUR (75XX) FK4-1550 HDD
FM4-6627-020 BK HOPPER ASSY (70/90XX) FL3-4286 HDD (imagePASS A1)
FM1-C002-010 CLR HOPPER ASSY (70/90XX) NEW TYPE FH7-7625-030 RCD (70/90XX/7260/7565/7570)
FM1-C004-010 CLR HOPPER ASSY (70/90XX) OLD TYPE FH7-7626 RCD (7270/7280/9280/7580)
FM1-C001-010 CLR HOPPER MOUNT (70/90) NEW TYPE FM0-2272 IH HEATER PCB ASSY (72/92XX)
FM1-C003-010 CLR HOPPER MOUNT (70/90) OLD TYPE FM3-9570 DC CONTROLLER MOTHER
N.B. THE ABOVE 4 PARTS ARE SERIAL NO. DEPENDANT FM3-9571 DC CONTROLLER I/F (70XX/90XX)
FM0-1822 COLOUR HOPPER ASSY (72/92XX) FM4-0743 MAIN CONTROLLER 1 (9070)
FM0-0855 BK HOPPER ASSY (72/92XX) FM4-0754 MAIN CONTROLLER 1 (9060)
FM1-L402 COLOUR HOPPER ASSY (75XX) FM4-0744 MAIN CONTROLLER 1 (7065)
FM1-L390 BK HOPPER ASSY (75XX) FM4-0746 MAIN CONTROLLER 1 (7055)
Fixing (70/90XX) FM4-0751 MAIN CONTROLLER 2 (70XX/90XX)
FM1-G184 UPPER FIXING BELT ASSY FM0-0740 DC CONTROLLER I/F (72XX/92XX)
FM4-5702 LOWER FIXING BELT ASSY FM0-3065 MAIN CONTROLLER 1 (9280)
FK2-2537 THERMISTOR (THM2) FM0-3066 MAIN CONTROLLER 1 (7270)
FK2-7870 THERMISTOR UNIT (THM3) FM0-3068 MAIN CONTROLLER 1 (7260)
FK2-7871 THERMISTOR UNIT (THM4) FM0-3069 MAIN CONTROLLER 1 (7280)
FM3-4735 HEATER ASSY (H4) FM0-3070 MAIN CONTROLLER 1 (9270)
FM0-3056 MAIN CONTROLLER 2 (72XX/92XX) FC7-0155 CASS SEPARATION ROLLER
FM1-V872 IH HEATER PCB ASSY (75XX) FB1-8581 MULTI FEED ROLLER
FM1-Y883 DC CONTROLLER (75XX) FB5-0873 MULTI SEPARATION ROLLER
FM1-N340 MAIN CONTROLLER (7580) 1241B001BA CASSETTE (UNIVERSAL)
FM1-V676 MAIN CONTROLLER (7580 – MK3) Sundries
FM1-N341 MAIN CONTROLLER (7570) FC8-8815 OZONE, LH (250K sheets)
FM1-V677 MAIN CONTROLLER (7570 – MK3) FC8-8814 OZONE, RH (250K sheets)
FM1-N342 MAIN CONTROLLER (7565) FL2-6048 REFRESH ROLLER
FM1-V678 MAIN CONTROLLER (7565 – MK3) FC7-0175 REFRESH HEAT INSULATING BUSHING
FM3-7994 CONTROL PANEL CPU PCB (70XX) PCB’s
FM1-R833 CONTROL PANEL CPU PCB (72XX) FH7-7625-030 RCD
FM1-T858 CONTROL PANEL CPU PCB (75XX) FE1-6118 HDD, IP SERVER Q1
FM2-5242 HDD, IP SERVER T1
imagePRESS C1/C1+ FM2-8161 DC CONTROLLER PCB (C1)
Image Process FM3-8357 DC CONTROLLER PCB (C1+)
0405B002AA DRUM FM2-7349-010 MAIN CONTROLLER PCB
FC5-8829 DRUM CLEANING BLADE
FM3-1211 DEV ASSY (Y) imagePRESS C600/650/700/750/800/850
FM3-1212 DEV ASSY (M) Image Process
FM3-1213 DEV ASSY (C) 8064B001AA DRUM UNIT (BK)
FM3-1214 DEV ASSY (K) 8065B001AA DRUM UNIT (CLR x3)
0401B001AA DEV START (K) FM1-C714 DEV UNIT Y
0402B001AA DEV START (M) FM1-C715 DEV UNIT M
0403B001AA DEV START (C) FM1-C716 DEV UNIT C
0404B001AA DEV START (Y) FM1-C717 DEV UNIT BK
FK2-0033 DEVELOPING CLUTCH FM1-D410 ITB BELT
FC5-8829 CLEANING BLADE FM1-C653 ITB TRANSFER CLEANER ASSY
FL2-2707 SEAL SUPPORT PLATE (FRONT) FL0-1877 INTERNAL BELT SCRAPER
FL2-2708 SEAL SUPPORT PLATE (REAR) FC0-9785 TRANS ROLLER CLR (x3)
FL2-2709 SCOOP-UP SHEET SUPPORT PLATE FE2-0170-010 TRANS ROLLER K (x1)
FL2-2713 END SEAL (FRONT) FC7-9325 INTERNAL SECONDARY TX ROLLER (x1)
FL2-2714 END SEAL (REAR) FC8-2281 CLEANING BLADE (BK)
FC5-8837 DRUM CLEANING BRUSH FL2-8652 SCRAPER SHEET (BK)
FL2-2584 TRANSFER BELT (ITB) FL2-8653 SIDE SCRAPER, FRONT (BK)
FC6-1545 PRIMARY TRANSFER ROLLER FL2-8654 SIDE SCRAPER, REAR (BK)
FC5-1661 SECONDARY TRANSFER INSIDE ROLLER FL2-8807 PRE-TRANS CORONA WIRE
FM2-2485 2ND TRANS ROLLER ASSY (MOD) FL2-7750-010 PRIMARY / PRE-TRANS SLIDER PAD
FC6-1056 PRIMARY GRID FL3-7560 PRIMARY / PRE-TRANS HOLDER PAD
FC6-1547 ITB CLEANING BRUSH (21MM DIA.) FL3-4090 PRIMARY HOLDER PAD (LARGE)
FC6-1546 ITB CLEANING BRUSH (18MM DIA.) FL2-8915 PRI CORONA WIRE
FC6-4910 BIAS ROLLER CLEANING BLADE FC0-9857 PRI GRID
Fixing FC0-9786 2ND TRANS OUTER ROLLER
FL2-6945 FIXING ROLLER FM0-1519 HOPPER ASSY, CLR
FM2-2481 FIXING BELT ASSY FM1-L409 HOPPER ASSY, CLR (650,750.850)
FL2-6530 FIXING BELT FM0-1338 HOPPER ASSY, BK
FM2-2473 FIXING WEB ASSY FM0-1518 HOPPER ASSY, BK (650,750,850)
FU6-0646 FIXING GEAR (FOR NOISE) FM0-1366 LASER UNIT, CLR
FL2-5457 PRESSURE PAD FM0-2020 LASER UNIT, CLR ( 650,750,850)
FL2-2788 PAD COVER FM0-1367 LASER UNIT, BK
FC5-9778 FIXING CLEANING BELT FM0-2021 LASER UNIT, BK (650,750,850)
FB4-3689 INSULATING BUSH Fixing
FL2-5453 OIL-COATING ROLLER FM1-C721 UPPER FIXING BELT ASSY
FC5-2582 EXTERNAL HEATING INSULATING BUSH FM1-C722 LOWER FIXING BELT ASSY
FC7-0932 EXTERNAL HEATING ROLLER FK2-7885 UPPER HALOGEN HEATER (H5)
FC5-9777 EXTERNAL HEATING ROLLER CLEANER FM0-1374 UPPER HEATER ASSY (H4)
FC5-9766 STEERING ROLLER FK2-7870 THERMISTOR UNIT (THM3)
FM3-0045 DELIVERY UPPER SEPARATION PLATE FK2-7871 THERMISTOR UNIT (THM4)
FM2-2644 DELIVERY LOWER SEPARATION CLAW FK2-0607 THERMOSENSOR (THM5)
Paper Feed FK2-7919 THERMISTOR UNIT (THM6)
FC5-2524 CASS P/U ROLLER Paper Feed
FC7-0154 CASS FEED ROLLER FL0-4500 ALL CASS P/U ROLLERS
FC0-9450 ALL CASS FEED ROLLERS
FC0-9631 ALL CASS SEP ROLLER
FM1-D448-010 CASSETTE
Sundries
FM0-4910 WASTE TONER BOTTLE
FL3-4101-000 OZONE FILTER (x2) (600K sheets)
FL3-7553 DUST FILTER (REAR)
FL2-0439 DUST FILTER (RHS)
UK-PART-042 15A MAINS LEAD
PCB’s
FH7-7626 RCD
FK3-3812 HDD
FK3-3815 HDD
FM0-2916-010 DC CONTROLLER I/F PCB
FM0-4353 MAIN CONTROLLER 1
FM0-4351 MAIN CONTROLLER 2
FM1-C706 DC PSU (24V)
FM3-4877-010 DC PSU (12V)
FM0-2939 IH PSU
FM0-2927 RELAY PCB
FM0-2929 AC DRIVER PCB
PERIPHERALS DADF AA1 (2535/45)
FM3-6892 P/U ROLLER UNIT
FEEDERS FL3-5538-010 SEP PAD
DADF M1 (iR7086/CLC5151) FC8-6339 SENSOR FLAG, DOC LENGTH
FC3-0722 FEED ROLLER FL2-9945 COPYBOARD PANEL ASSY
FC5-3115 SEP ROLLER DADF AB1 (2520/25/30)
FL2-0749 SEP PAD FG3-4043 P/U ROLLER UNIT
FC5-3137 SENSOR FLAG, DOC LENGTH FL3-3239 SEP PAD
FL2-0728 COPYBOARD PANEL FC3-1488 SENSOR FLAG, DOC LENGTH
FM2-1021 CONTROLLER PCB FF3-4624 COPYBOARD PANEL ASSY
DADF N1 (2270/2870/3570/4570/3025/3035/3045) DADF AM1 (iR2202)
FM2-2956 P/U ROLLER FG3-4043 P/U ROLLER UNIT
FL0-3193 SEP ROLLER FL3-3239 SEP PAD
FM1-A719 SEP PAD COLOUR IMAGE R’DER B1 (iR-ADV C50XX)
FC5-4307 SENSOR FLAG, DOC LENGTH FC9-4968 P/U ROLLER
FL2-0947 COPYBOARD PANEL ASSY FL0-3193 SEP ROLLER
DADF P1/P2 (2016/18/20/22/25/28) FM4-1734 SEP PAD ASSY
FC3-1525 P/U ROLLER FU7-5343 SEP PAD SPRING (NEW TYPE)
FG3-4044 SEP ROLLER FL3-2861 COPYBOARD PANEL
FF3-4632 SEP PAD UNIT DX COLOUR IMAGE READER A1/B1/C1
FC3-1488 SENSOR FLAG, DOC LENGTH (iR-ADV C50XX/C70XX/C90XX & 60XX/80XX)
DADF Q1 (7095/7105) FC8-5577 P/U ROLLER
FG6-7628 ADF LINK ASSY (GUIDE ACTUATOR) FB2-7777-020 SEP ROLLER
FB4-7640 P/U ROLLER FL2-9608 FEED ROLLER
FG6-7725 FEED SHAFT FM3-6234 DOC GUIDE ASSY
FE6-3059 SEP BELTS FC5-4265 COPYBOARD PANEL
FB5-9541 DF BELT DX COLOUR IMAGE READER E1
FM2-2443 SEP/FEED ASSY
FS7-2036 SPRING (P/U GATE SOLENOID)
(iR-ADV C52XX)
FB4-7788 BLACK GUIDE (UNDER DF BELT) FL3-4619 P/U ROLLER
FM2-5446 CONTROLLER PCB FC5-3115 SEP ROLLER
FM4-6661 SEP PAD UNIT
DADF R1 (imagePRESS C1)
FB4-7640 P/U ROLLER
DX COLOUR IMAGE READER F1
FM2-2408 FEED SHAFT (iR-ADV C72XX/C92XX)
FE6-3059 SEP BELTS FC8-5577 P/U ROLLER
FC6-0929 DF BELT FB2-7777-020 SEP ROLLER
FM2-2428 SEP/FEED ASSY FL2-9608 FEED ROLLER
FC6-0987 HINGE, LEFT DX COLOUR IMAGE READER G1
FC6-0988 HINGE, RIGHT (iR-ADV 62XX/82XX)
FS7-2036 SPRING (P/U GATE SOLENOID) FC3-0722 P/U ROLLER
FM2-4734 CONTROLLER PCB FC5-3115 SEP ROLLER
DADF S1 (5055/5065/5075) FL2-0749 SEP PAD
FC3-0722 P/U ROLLER COLOUR IMAGE R’DER D1 (iR-ADV C20XX)
FC5-3115 SEP ROLLER FC8-6355 P/U ROLLER
FL2-0749 SEP PAD FL0-3193 SEP ROLLER
FC5-3137 SENSOR FLAG, DOC LENGTH FM1-A719 SEP PAD
FL2-0728 COPYBOARD PANEL (DADF T1 NO.) FL2-9945 COPYBOARD PANEL
DADF T1 (5185) COLOUR IMAGE R’DER E1 (iR-ADV 40XX)
FC3-0722 P/U ROLLER FC8-6355 P/U ROLLER
FC5-3115 SEP ROLLER FL0-3193 SEP ROLLER
FL2-0749 SEP PAD FM1-A719 SEP PAD ASSY
FC5-3137 SENSOR FLAG, DOC LENGTH FL2-9945 COPYBOARD PANEL
FL2-0728 COPYBOARD PANEL COLOUR IMAGE R’DER F1/G1
DADF U1 (3225/35/45) (iR-ADV C52XX/C22XX)
FC8-6355 P/U ROLLER FC9-4968 P/U ROLLER
FL0-3193 SEP ROLLER FL0-3193 SEP ROLLER
FL3-5538-010 SEP PAD UNIT FM0-1226 P/U /SEP ROLLER UNIT
FC8-6339 SENSOR FLAG, DOC LENGTH FM1-A719 SEP PAD
FL2-9945 COPYBOARD PANEL
COLOUR IMAGE R’DER H1 (iR-ADV 42XX) FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
FC8-6355 P/U ROLLER FE3-7563 STAPLE CARTRIDGE
FL0-3193 SEP ROLLER 4G3-1777 STAPLER RIBBON CABLE
FM1-A719 SEP PAD ASSY FINISHER Z1 (23/28/30/33/3580)
FL2-9945 COPYBOARD PANEL FM3-0951 FINISHER CONTROLLER PCB ASSY
DX COLOUR IMAGE READER H1 FE3-7563 STAPLE CARTRIDGE
(iP-C600/700/800) FINISHER AA1/AA2 (imagePRESS C1)
FC8-5577 P/U ROLLER 4G3-1745 FINISHER CONTROLLER PCB ASSY
FB2-7777-020 SEP ROLLER 4G3-1746 SADDLE FINISHER CONT’LER PCB ASSY
FL2-9608 FEED ROLLER 4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER)
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
NOTE: Gen 3 DADF parts are listed under the device. FE3-7563 STAPLE CARTRIDGE
FM2-1426 STAPLER RIBBON CABLE
FINISHER AD1/AD2 (iR5055/65/75)
FINISHERS FM3-0948 FINISHER CONTROLLER PCB ASSY
FINISHER Q1/2/3/4/R1R2 (4570) FM3-0949 SADDLE FINISHER CONT’LER PCB ASSY
FG3-2883-070 FINISHER CONTROLLER PCB ASSY 4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER)
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FE3-7563 STAPLE CARTRIDGE
FH6-5101-030 CLUTCH (CL31/32) FM2-0665 STAPLER ASSY
FE3-7563 STAPLE CARTRIDGE 4G3-1777 STAPLER RIBBON CABLE
FM2-0665 STAPLER ASSY FINISHER AE1/AE2 (iR3X25/35/45)
FM2-0721 STAPLE (TRAY) ASSY FM3-0257 FINISHER CONTROLLER PCB ASSY
FM2-1426 STAPLER RIBBON CABLE FM3-0258 SADDLE FINISHER CONT’LER PCB ASSY
FINISHER S1 (22/28/35/4570 3X25/35/45) 4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER)
9563A001AA FINISHER S1 (MERCURY PART NO.) FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
4G1-1478 FINISHER CONTROLLER PCB ASSY FE3-7563 STAPLE CARTRIDGE
4A3-1257 STAPLE CARTRIDGE FM2-0665 STAPLER ASSY
4G3-0480 STAPLER ASSY 4G3-1777 STAPLER RIBBON CABLE
9565A001AA ADDITIONAL TRAY B1 FINISHER B1 (iR-ADV C70/90XX)
FINISHER T1/T2 (5570/6570) FM4-2290 STAPLE FINISHER CONT’LER PCB ASSY
4G1-1487 FINISHER CONTROLLER PCB ASSY FM4-2293 SADDLE FINISHER CONT’LER PCB ASSY
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) 4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER)
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
FE3-7563 STAPLE CARTRIDGE FM2-0665 STAPLER BODY ASSY
FM2-0665 STAPLER ASSY FE3-7563 STAPLE CARTRIDGE
FM2-1426 STAPLER RIBBON CABLE 4G3-1777 STAPLER RIBBON CABLE
FINISHER V1/V2 (7086/7095/7105) FINISHER C1 (iR-ADV C50XX)
FM2-5695 FINISHER CONTROLLER PCB ASSY 1 FM4-1851 STAPLE FINISHER CONT’LER PCB ASSY
FM2-5696 SADDLE FIN CONTROLLER PCB ASSY 2 FM4-1857 SADDLE FINISHER CONT’LER PCB ASSY
FM2-5698 FEEDER MOTOR DRIVE PCB 4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER)
FM2-6541-030 STAPLER ASSY FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
FM2-6362 STAPLE MOUNT ASSY FM2-0665 STAPLER BODY ASSY
FC7-1700 STAPLE CARTRIDGE FE3-7563 STAPLE CARTRIDGE
FC6-5798 CASTOR 4G3-1777 STAPLER RIBBON CABLE
FC6-5749 CASTOR BRACKET FINISHER D1 (iR-ADV 80XX)
FINISHER W1/W2 (4040/4080/4580/5151/5185) FM4-6111 STAPLE FINISHER CONT’LER PCB ASSY
4G3-1654 SADDLE FINISHER CONT’LER PCB ASSY FC9-3380 LEVER, PAPER DETECT (LOWER)
4A3-5454 STACK HEIGHT SENSOR ARM (UPPER) FM4-4697 STAPLER BODY ASSY
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FC9-3591 STAPLE CARTRIDGE
FE3-7563 STAPLE CARTRIDGE FC6-6602 SADDLE STAPLER CARTRIDGE
4G3-1777 STAPLER RIBBON CABLE FINISHER E1 (iR-ADV 60XX)
FINISHER X1 (4040/4080/4580/5151/5185) FM4-2291 STAPLE FINISHER CONT’LER PCB ASSY
FINISHER Y1/Y2 (23/28/30/33/3580) 4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER)
FM3-0257 FINISHER CONTROLLER PCB ASSY FC5-5004 STACK HEIGHT SENSOR ARM (LOWER)
FM3-0258 SADDLE FINISHER CONT’LER PCB ASSY FM2-0665 STAPLER BODY ASSY
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FE3-7563 STAPLE CARTRIDGE
4G3-1777 STAPLER RIBBON CABLE FM4-8187 STAPLE BODY ASSY
FINISHER G1 (iR-ADV 40XX) FC0-3502 STAPLE CARTRIDGE
FM4-8284 STAPLE FINISHER CONT’LER PCB ASSY STAPLE FINISHER S1 (iR-ADV 250/350/351)
FM4-8285 SADDLE FINISHER CONT’LER PCB ASSY FE3-8372 FINISHER CONTROLLER PCB ASSY
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FM4-8187 STAPLE BODY ASSY
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FC0-3502 STAPLE CARTRIDGE
FM2-0665 STAPLER BODY ASSY FINISHER T1 (iP-C600/700)
FE3-7563 STAPLE CARTRIDGE FM1-H809 STAPLE FINISHER CONT’LER PCB ASSY
4G3-1777 STAPLER RIBBON CABLE FM1-H810 SADDLE FINISHER CONT’LER PCB ASSY
FINISHER J1 (iR-ADV C52XX) FM1-D194 STAPLER BODY ASSY
FM0-2014 STAPLE FINISHER CONT’LER PCB ASSY FE3-7563 STAPLE CARTRIDGE
FM0-2340 SADDLE FINISHER CONT’LER PCB ASSY FL2-0846 SADDLE STAPLER ASSY
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FINISHER AM1 (iP-C700/800)
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FM0-4703 STAPLE FINISHER CONT’LER PCB ASSY
FM2-0665-010 STAPLER BODY ASSY FM4-6987 SADDLE FINISHER CONT’LER PCB ASSY
FE3-7563 STAPLE CARTRIDGE FM2-6541-030 STAPLER BODY ASSY
FINISHER K1 (iR-ADV C92XX) FC7-1700 STAPLE CARTRIDGE
FM0-2213 STAPLE FINISHER CONT’LER PCB ASSY FC6-6602 SADDLE STAPLER CARTRIDGE
FM0-2411 SADDLE FINISHER CONT’LER PCB ASSY FINISHER U1 (iR-ADV C33XX)
FC9-3380 LEVER, PAPER DETECT (LOWER) FM1-G992 STAPLE FINISHER CONT’LER PCB ASSY
FM0-2341 STAPLER BODY ASSY FM1-H925 SADDLE FINISHER CONT’LER PCB ASSY
FC7-1700 STAPLE CARTRIDGE FM1-D194 STAPLER BODY ASSY
FC6-6602 SADDLE STAPLER CARTRIDGE FE3-7563 STAPLE CARTRIDGE
FINISHER L1 (iR-ADV C72XX) FINISHER V1 (iR-ADV 65XX)
FM0-2569 STAPLE FINISHER CONT’LER PCB ASSY FM1-H868 STAPLE FINISHER CONT’LER PCB ASSY
FM0-2570 SADDLE FINISHER CONT’LER PCB ASSY FM1-F926 SADDLE FINISHER CONT’LER PCB ASSY
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FM1-H337 STAPLER BODY ASSY
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FL0-6966 SADDLE STAPLER ASSY
FM2-0665-010 STAPLER BODY ASSY FINISHER V2 (iR-ADV 75XX)
FE3-7563 STAPLE CARTRIDGE FM2-A877 STAPLE FINISHER CONT’LER PCB ASSY
FINISHER M1 (iR-ADV C22XX) FM2-A878 SADDLE FINISHER CONT’LER PCB ASSY
FM0-3259 STAPLE FINISHER CONT’LER PCB ASSY FM1-H337 STAPLER BODY ASSY
FM0-3260 SADDLE FINISHER CONT’LER PCB ASSY FE3-6793 STAPLE CARTRIDGE
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FL0-6966 SADDLE STAPLER ASSY
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FINISHER W1 PRO (iR-ADV 85XX)
FM2-0665-010 STAPLER BODY ASSY FM0-4706 STAPLE FINISHER CONT’LER PCB ASSY
FE3-7563 STAPLE CARTRIDGE FM4-6987 SADDLE FINISHER CONT’LER PCB ASSY
FINISHER N1 (iR-ADV C8285) FM2-6541-030 STAPLER BODY ASSY
FM0-4314 STAPLE FINISHER CONT’LER PCB ASSY FC7-1700 STAPLE CARTRIDGE
FM0-4309 SADDLE FINISHER CONT’LER PCB ASSY FM4-7572 SADDLE STAPLER ASSY
FC9-3380 LEVER, PAPER DETECT (LOWER) FC6-6602 SADDLE STAPLER CARTRIDGE
FM0-2341 STAPLER BODY ASSY FINISHER X1 (iR-ADV 75XX)
FC7-1700 STAPLE CARTRIDGE FM1-N944 STAPLE FINISHER CONT’LER PCB ASSY
FC6-6602 SADDLE STAPLER CARTRIDGE FM1-N946 SADDLE FINISHER CONT’LER PCB ASSY
FINISHER P1 (iR-ADV 62XX) FM0-2341 STAPLER BODY ASSY
FM0-4169 STAPLE FINISHER CONT’LER PCB ASSY FC7-1700 STAPLE CARTRIDGE
FM0-4170 SADDLE FINISHER CONT’LER PCB ASSY FM4-3091 SADDLE STAPLER ASSY
4A3-5454-010 STACK HEIGHT SENSOR ARM (UPPER) FC6-6602 SADDLE STAPLER CARTRIDGE
FC5-5004 STACK HEIGHT SENSOR ARM (LOWER) FINISHER Y1 (iR-ADV 45XX & C55XX)
FM2-0665-010 STAPLER BODY ASSY FM1-U975 STAPLE FINISHER CONT’LER PCB ASSY
FE3-7563 STAPLE CARTRIDGE FM1-F970 SADDLE FINISHER CONT’LER PCB ASSY
FINISHER Q1 (iR-ADV 82XX) FM1-L281 STAPLER BODY ASSY
FM0-3042 STAPLE FINISHER CONT’LER PCB ASSY FE8-1031 STAPLE CARTRIDGE
FM3-8401-010 SADDLE FINISHER CONT’LER PCB ASSY FINISHER Z1 (iR-ADV C255/355/256/356)
FM2-6541-030 STAPLER BODY ASSY FE3-8372 FINISHER CONTROLLER PCB ASSY
FC7-1700 STAPLE CARTRIDGE FM4-8187 STAPLE BODY ASSY
FC6-6602 SADDLE STAPLER CARTRIDGE FC0-3502 STAPLE CARTRIDGE
STAPLE FINISHER R1 (iR-ADV 400/500) FINISHER AA1 (iR-ADV C35XX)
FM4-8199 FINISHER CONTROLLER PCB ASSY FM1-Z859 STAPLE FINISHER CONT’LER PCB ASSY
FM1-F970 SADDLE FINISHER CONT’LER PCB ASSY
FM1-L281 STAPLER BODY ASSY
FE8-1031 STAPLE CARTRIDGE
INNER FINISHER A1 (iR-ADV C50XX)
FM4-2124 FINISHER CONTROLLER PCB ASSY
FM4-2710-010 STAPLE BODY ASSY
FM4-2698 GRIPPER ASSY
4Y3-0021 GRIPPER ASSY RETROFIT
FC9-6678 GRIPPER RAIL (NEW WHITE TYPE)
FK2-8758 STAPLER RIBBON CABLE
INNER FINISHER B1 (iR 25XX)
FL3-4629-010 GRIPPER RAIL
INNER FINISHER C1 (iR-ADV C20XX)
FL3-4629-010 GRIPPER RAIL
INNER FINISHER D1 (iR-ADV 40XX)
INNER FINISHER E1 (iR-ADV C52XX)
INNER FINISHER F1 (iR-ADV C22XX)
INNER FINISHER G1 (iR-ADV C33XX)
FM1-E951 FINISHER CONTROLLER PCB ASSY
FK4-1126 STAPLE BODY ASSY
INNER FINISHER H1 (iR-ADV C55XX)
FM1-J938 FINISHER CONTROLLER PCB ASSY
FK4-1126 STAPLE BODY ASSY
INNER FINISHER J1 (iR-ADV C45XX)
FM1-J940 FINISHER CONTROLLER PCB ASSY
FM1-N381 STAPLE BODY ASSY
INNER FINISHER K1 (iR-ADV C35XX)
FM1-Z864 FINISHER CONTROLLER PCB ASSY
FM1-N381 STAPLE BODY ASSY
Error Description Category Remarks
E000 The fixing temperature does not go up after turning ON the power Related
due to a fault in the thermistor or the heater, etc., fixing unit
e.g.) It does not reach 70 C degrees within 2 min.
E001 The fixing temperature abnormally goes up due to a fault in the
thermistor or SSR, etc.
E002 The fixing temperature does not reach a specific temperature due
to a fault in the thermistor or the heater, etc.) The fixing
temperature does not go up to 190 C degrees within 5 min after
reaching 70 C degrees.
E003 The fixing temperature drops abnormally after wait time is up due
to a fault in the thermistor, the heater, etc.) After wait time is up,
the fixing temperature drops to 70 C degrees.
E004 A short circuit in the fixing heater drive circuit (SSR, etc.) is
detected.
E005 The fixing web is wound up completely.
E006 The fixing drawer connector is not connected as the front door is
closed.
E007 The fixing film is off to the side.
E008 A specific number of copies are made after the machine detects Since a user cannot
that fixing oil is out. re-supply fixing oil, the
error code is indicated.
E009 The rated voltage of the power supply and that of the fixing unit do
not match.
E010 Clock pulses fail to be generated or the PLL lock fails to be Related
released due to a fault in the main motor, etc. drum drive
E011 Excess current flows to the motor control circuit because the main unit and
motor is locked up, etc. main drive
unit
E012 Clock pulses fail to be generated or the PLL lock is released due In case the drum drive
to a fault in the drum motor, etc. motor exists in addition
to the main motor, this
code refers to an error
of a motor which
drives mainly other
units than the drum.
E013 •The PLL lock is released because waste toner motor is locked
up, etc.
•The micro switch employed to detect clogging of waste toner is
activated.
•The waste toner case is detected full.
E014 •The PLL lock of the fixing/feeding motor is released.
•Excess current of the feeding motor is detected.
E015 •Clock pulses of the pick-up/duplexing/developing motor fails to be
generated or be detected.
•Excess current of the pick-up/duplexing/developing motor is
detected.
E016 Excess current of the reciprocating motor of the photosensitive
drum cleaner unit is detected.
E017 The PLL lock of the drive motor of the holding tray unit is
released.
E018 The PLL lock of the drive motor of the oil removing roller is
released.
E019 The waste toner case is detected full although it is not.
E020 The developer fails to be replenished with starter developer Related A hopper motor error
properly. developing is identified by the
unit detail code of E020.
However, it may be
identified by E02x
according to need.
E021 The rotor fails to rotate and move properly due to a fault in the
developing rotor/motor ass'y.
E022 Pressure fails to be applied to the developer after a specific time
passes after the developer is selected.
E023 The developer sleeve motor fails to rotate properly.
E024 The developer cannot be detected. (The developer is not mounted
properly.)
E025 Excess current of the toner delivery motor or the cartridge motor is
detected.
E030 The total counters are not functioning. Related
E031 The optional counters are not functioning. counter
E032 The counters for ASSIST are not functioning. (Disconnection of
counter pulse for ASSIST.)
E040 The lifter position signal fails to be generated due to a lifter clutch Related
failure. paper
E041 The paper deck lifter fails to be detected within a specific time. pick-up unit
E042 The roll paper cutting operation is not functioning properly
because the cut motor does not work, etc.
E043 An abnormal signal is detected due to a fault in the pick-up motor
for the 3-cassette deck/3.5K paper deck.
E050 A malfunction of the holding tray. A fault in the side registration is Related The duplexing unit for
included. duplex unit the stack system
E051 The home position of the side registration cannot be detected The duplexing unit for
within a specific time. the through-path
system
E054 The home position of the duplexing unit feed roller cannot be
detected.
E055 The horizontal registration guide of the duplex unit exceeds its
maximum travel distance.
E060 The home position of the primary corona wire cleaner cannot be Related
detected within a specific time. charging
E061 Specific potential is not be required or the limiter is activated as
the potential is controlled.
E062 The photosensitive drum temperature does not reach a specific
value due to a fault in the photosensitive drum heater, etc.
E063 The home position of the transfer corona wire cleaner cannot be An error code is not to
detected. be indicated.
E064 The setting value for the output from the microcomputer
considerably deviates from the control value of the actual output.
E065 High voltage leakage from the primary corona assembly is
detected.
E066 Signals from the temperature/humidity sensor cannot be detected.
E067 Two or more faults in the primary/ pre (post)-transfer/ transfer/
separation high voltage are detected (including power output
stoppage, electric leakage from the primary corona assembly).
E068 High voltage leakage from or an open circuit in the separation
corona assembly is detected.
E069 High voltage leakage from or an open circuit in the transfer corona
assembly is detected.
E070 The home position of the transfer drum cannot be detected within Related
a specific time. transfer
E071 An image leading edge signal cannot be detected within a specific
time.
E072 A fault in the main motors such as the transfer drum motor, etc.
E073 The transfer drawer connector or the transfer frame drawer
connector is not connected as the front door is closed.
E074 The transfer belt unit does not reach the target position within a
specific time.
E075 The transfer belt is off to the side.
E076 The transfer belt web is wound up completely.
E077 The motor inside the transfer belt unit has a fault.
E079 The home position (to apply pressure) of the transfer drum
cleaner unit cannot be detected.
E080 An error occurs in the communication with the multi-colour unit Related
controller PCB. developing
E081 The vertical motor clock is faulty. unit for
E082 The horizontal motor clock is faulty. multi-colour
unit
E083 The CD unit horizontal movement right sensor is faulty.
E084 The CD unit horizontal movement left sensor is faulty.
E085 The CD unit feeder release sensor is faulty.
E086 The CD unit claw release is faulty.
E089 A malfunction of the multi-colour unit.
E090 The document feed motor is not functioning properly. Related
E091 A failure in the detection of the document feed sensor. document
feeder
(built-into
machine)
E100 The BD signal cannot be detected within a specific time. Related
E101 The AF motor of the laser unit is faulty. laser
E102 The light intensity of the laser does not reach a specific level.
E110 The polygonal scanner motor does not reach a specific speed Related
within a specific time. laser
E111 The polygonal cooling fan does not rotate properly. scanner
E120 The temperature of the laser does not reach a specific value. Related
E121 The stoppage of the laser cooling fan is detected. laser temp
control
E140 The movable guide motor is turned ON, and a specific position Related BJ
cannot be detected within a specific time.
E141 1. The capping motor is turned ON, and a specific position cannot
be detected within a specific time.
2. A specific position of the cam sensor for the recovery system
E142 The pressure position switching motor is turned ON, and a
specific position cannot be detected within a specific time.
E143 The intake switching motor is turned ON, and a specific position
E144 A detection signal is not returned to the ink pump monitor after the
ink pump is activated: DCC -> BHD -> pump drive signal
E145 No signal is generated from the position sensor within a specific
time after a drive signal of the cutter motor is generated.
E146 1. The waste ink full sensor is turned ON.
2. The intake counter for waste ink exceeds a specific value.
E150 Neither thermistor nor trimmer resistance is connected to the Related BJ
head. (The head is not connected.) head
E151 The thermistor of the head is open-circuited.
E152 The thermistor of the head is short-circuited.
E153 The trimmer resistance of the head is open-circuited.
E154 The trimmer resistance of the head is short-circuited.
E155 The trimmer resistance of the head is out of specifications.
E156 When a specific voltage is applied to the head, the voltage of the
head is not changed within a specific time.
E157 The voltage of the head is out of the specifications.
E160 The temperature of the head does not reach a specific Related BJ
temperature within a specific time. head temp
E161 The temperature of the head exceeds a specific temperature. control
E170 When the pulse motor for the head scan is driven, it cannot be Related BJ
detected by a sensor within a specific time. head
E171 The motor is not connected to the pulse motor driver PCB for the scanner
head scan.
E172 The gate array employed to drive the pulse motor for head scan is
faulty.
E180 The motor is not connected to the vertical scanning pulse motor Related BJ
driver PCB. paper feed
E181 The gate array employed to drive the vertical scanning pulse
motor is faulty.
E182 After the vertical scanning motor is driven, the phase sensor
E183 After the registration roller cam clutch 2 is turned ON, a given
paper size cannot be detected within a specific time.
E190 RAM directly connected to CPU is faulty. Related Failures in RAM of the
E191 An error occurs in the communication with the microcomputer CPU laser controller are
(D/A converter) for high voltage use. (printer indicated with detail
unit) codes.
E192 An error occurs in the communication with A/D converter.
E193 The gate array is faulty.
E194 The auto registration is faulty.
Data from the # pattern reading CCD is invalid.
E195 ROM failure -> No. of times data is written on EEPROM reaches
the upper limit.
E196 EEPROM failure: EEPROM read and write error (except software
counter), an error in EEPROM areas on DIMM.
E197 An error occurs in the communication within the printer:
•Errors continuously occur in the communication within the printer.
•Interruption during receiving is not made within a specific time.
E198 An error occurs in IC on the DC controller.
E200 When the scanner moves forward, the scanner reversal sensor is Related
activated. scanner
E201 The scanner is locked up, and excess current flows to the motor (main
control circuit. exposure
E202 The scanner does not return to the home position for vertical ass'y, This code must not be
scanning within a specific time. control indicated on the
panel) control panel - should
be checked in Service
Mode.
E203 Clock pulses are not generated or the PLL lock is released due to
a fault in the scanner motor, etc.
E204 When the scanner moves forward, the document leading edge
signal is not generated.
E205 The scanning operation does not complete within a specific time.
E206 The scanner does not return to the home position for horizontal
scanning within a specific time.
E207 After switching the wire tension of the scanner, sensor input is not
made within a specific time.
E208 (On machines which move the lens and the mirrors separately
when setting a copy ratio)
Mirror 4 and 5 do not return to the HP sensor within a specific
time.
E209 The scanner does not return to the CFF home position within a This code must not be
specific time. indicated on the
control panel - should
be checked in Service
Mode.
E210 The lens does not return to the home position within a specific Related
time. (In the direction of light axis) lens
E211 The thermistor of the scanner lamp is disconnected.
E212 The lens does not return to the home position within a specific
time. (In the direction of drum shaft)
E213 When performing slide reading, the scanner comes off from the
home position for slide reading.
E214 Rotation of the scanner fan cannot be detected after a specific
time passes.
E215 The thermistor of the scanning lamp (fluorescent lamp) exceeds a
specific temperature.
E216 The scanner lamp (fluorescent lamp） fails to turn ON after a
specific time passes.
E217 The temperature of the scanning lamp (fluorescent lamp) does not
reach a specific temperature while the scanning lamp temperature
is controlled.
E218 •The scanner lamp (fluorescent lamp） is turned ON while it is not
properly set.
•The filament of the fluorescent lamp is blown out.
E219 The thermistor for the heater exceeds a specific temperature while
the scanner lamp (fluorescent lamp） is turned ON.
E220 1. The scanning lamp is turned ON during stand-by.2. The Related
scanning lamp is turned OFF during copy operation. exposure
E221 The lamp regulator is faulty due to fluctuation of zero-cross signal.
E222 The scanning lamp pre-heater is faulty.
E223 1. The red filter does not return to the HP sensor within a specific Applied to all colour
time. filters
2. The red filter stays at the HP sensor after a specific time has
passed.
E224 The blank shutter does not return to the HP sensor within a
specific time.
E225 Insufficient light intensity of the scanning lamp: A specific level
cannot be attained for the signal during CCD gain correction.
E226 A malfunction of the scanner cooling fan is detected.
E230 The horizontal scanning motor driver PCB is not connected to the Related
CPU PCB. scanner
E231 The vertical scanning motor driver PCB is not connected to the drive unit
CPU PCB.
E240 An error occurs in the communication between the master and the Related
sleeve 0: Detail code is indicated. scanner
E241 An error occurs in the communication between the master and the CPU Machines which does
sleeve 1. communica not have the detail
E242 An error occurs in the communication between the master and the tion code function may use
sleeve 2. this code.
E243 An error occurs in the communication with control panel.
E244 An error occurs in the communication between PCBs: CPUs exist
on two or more PCBs, so the master and the sleeve are not be
separable.
E245 No. of times data is written on the soft counter memory reaches
the upper limit.
E246 Reading from/ writing to the soft counter memory cannot be done An error occurs when
properly. checking DIMM:
CP2120 (EEPROM
areas on DIMM)
E247 The software counter memory PCB and the software counter
value stored in SRAM are found inconsistent.
E248 The EEPROM on the reader controller is faulty.
•Inconsistency between the read data and the write data.
•Inconsistency between the ID in the EEPROM and the ID in the
ROM.
E249 An error occurs in the image memory on the image processing CLC5000
PCB
E250 KEY matrix is faulty. Related
E251 A fault in the inverter cooling fan is detected. control
panel
E260 The thermistor detects excessive temperature rise of the power Related
supply PCB due to a fault in the power supply unit cooling fan, etc. power
E261 Zero-cross signals fail. supply
E262 •Power of the printer is not turned ON when the main power of a
host machine is turned ON.
•A failure in the power supply fan is detected.
E270 The signal for slide reading and the document leading edge Related
detection signal are delayed or not be generated. scanner
E300 When the main power supply is turned ON after downloading, Related
data of an unrelated model is found in downloaded data. CPU
E301 A failure in the exposure control of the scanning lamp. (scanner)
E302 Shading correction failure.
E305 Multipurpose RAM failure. (A fault in RAM for image processing
and such.)
Detail code is indicated.
E309 Black offset correction failure.
E310 Editing failure. Related
E313 A fault in the gate array for the motor controller. gate array
E315 A fault is detected when encoding the image data. FAX failure
1. A chip failure is found when writing/reading/verifying the image
data by using the register of the encoding chip.
2. An error occurs when encoding the image data.
E320 A fault is detected in the measurement signal from the CCD. Related
CCD
E350 •The bar code data for backup and the attached bar code data do Related GZ
not match.•A fault in the Serial No. PCB is detected when power is
turned ON.
E351 1. The GZ PCB is not connected to the CPU PCB.
2. Versions of ROM for GZ are not consistent.
E352 When registering bar code data with Service Mode, a bar code
cannot be read (a parity error, an incorrect bar code, etc.)
E353 When turning ON the power, inconsistency of the serial number of
the RCON (SRAM) and that of the EEPROM is detected.
E354 •When turning ON the power, inconsistency of the serial No. of the
serial number PCB and that of the controller PCB (SRAM)/counter
memory is detected.
•When turning ON the power, it is detected that no serial numbers
are assigned to the serial number PCB and the controller PCB
(SRAM)/ counter memory.
E355 When turning ON the power, inconsistency among the serial No.
PCB, the controller PCB (SRAM), and the counter memory PCB is
detected.
E400 An error occurs in the serial communication with DF, ADF, and Related
RDF. data line of
E401 The pick-up roller does not return to the home position within a document
specific time. feeder
E402 Clock pulses of the belt motor are below a specific value.
E403 Clock pulses of the feeder motor are below a specific value.
E404 Clock pulses of the delivery motor are below a specific value.
E405 Clock pulses of the pick-up motor are below a specific value.
E406 Movement of the guide driven by the side guide motor does not
complete within a specific time.
E407 Movement of the tray driven by the document tray motor does not
complete within a specific time.
E408 Clock pulses from the feeder motor are below a specific value.
E409 Clock pulses of the CP register motor are below a specific value.
E410 •The pick-up roller height sensor does not generate signals within Related ADF for GP605
a specific time as the pick-up motor is being driven. feed of
•The pick-up roller HP does not send out signals within a specific document
time as the pick-up motor is being driven. feeder
E411 The output of the paper sensor is faulty.
E412 The lock signal is generated at the time when the cooling fan drive DADF-D1
signal is generated.
E420 Backup data cannot be read, or the data is faulty. Related ADF for GP605
E421 Faults occur when writing backup data, or the written data is CPU DADF-D1
faulty. communica
E422 A transmission error occurs due to faults in IPC of DF/ADF/RDF. tion of
(This error code is detected by DF and it is not notified to a copier, document
so the error code is not indicated.) feeder
E431 1. The output of the paper sensor is faulty.

2. The sub pick-up roller does not return to the home position.
3. Clock pulses of the sub feeder motor are below a specific
value.
E441 CFF motor failure
E442 CFF exhaust fan failure
E443 The CFF lamp regulator failure, the CFF lamp failure, a fault in the
CFF temperature fuse, or a fault in the CFF controller PCB.
E446 The output of the sensor does not change after the CFF mirror
drive signal is generated.
E447 The CFF leaves the home position, and the power to the Sorter is
cut off.
E500 An error occurs in the serial communication with the Sorter or the Related
Finisher, etc. data line of
E501 An error occurs in the communication within the Finisher Sorter /
controller. Finisher
E502 Coming off of a sensor connector in an optional device is
detected:
•The door sensor, paper sort sensor, non-sort sensor, bin outside
paper sensor, staple position sensor, etc.
E503 An error occurs in the communication between the Finisher
controller PCB and the Side Stitcher controller.
E504 An error occurs in the communication error between the controller
PCB and the (height) sensor.
E505 An error is found in Check SUM for backup RAM when turning the
power ON.
E506 Download fails.
E507 An error occurs in the communication between the trimmer and
the finisher.
E510 Clock pulses are not generated from the feeder motor. Related
E511 Clock pulses from the feeder motor are below a specific value. feed1 of
Sorter /
E512 Clock pulses cannot be detected due to a delivery motor failure, Finisher
etc.
E513 Clock pulses cannot be detected due to a tandem feeder motor
failure, etc.
E514 Clock pulses cannot be detected due to a push motor failure, etc.
E515 Clock pulses cannot be detected due to a tray feeder motor
failure, etc.
E516 Clock pulses from the low speed feed motor are not obtained.
E517 The home position of the curl removing pressure roller in the
buffer path cannot be detected.
E518 The feeder motor in the paper holder does not reach a specific
speed.
E520 The stacker unit does not reach the upper limit sensor within a Related
specific time due to a motor failure, etc. stacker1
E521 Input to the tray position sensor is not made within a specific time
due to an offset motor failure of the shift (offset) tray.
E522 The push bar does not return to the home position within a
specific time.
E523 The reference wall does not return to the home position within a
specific time.
E524 The multi guide does not return to the home position within a
specific time.
E525 Automatic adjustment of the bin paper sensor fails, or an error
occurs in the automatic adjustment value.
E526 Automatic adjustment of the bin paper sensor fails, or an error
occurs in the automatic adjustment value.
E527 Automatic adjustment of the stack tray paper sensor 1 fails.
E528 Automatic adjustment of the stack tray paper sensor 2 fails.
E529 Automatic adjustment of the tray stacking amount sensor fails.
E530 The guide plate of the stapler unit does not return to the home Related
position within a specific time. stapler
E531 The stapler does not return to the home position within a specific
time.
E532 The stapler does not return to the home position for the front/rear
shift operation within a specific time.
E533 Automatic adjustment of the paper sensor for the stapler fails, or
an error occurs in the automatic adjustment value.
E534 Bins do not reach the stipulated positions within a specific time
while the bin rear end open/close motor is working.
E535 Clock pulses and such cannot be detected due to faults in the
swing unit motor, etc.
E536 Auto adjustment of the leading edge sensor fails.
E537 The sheet alignment part does not return to the home position
within a specific time while the lower bin guide motor is working.
E540 The home position of the lead cam cannot be detected within a Related bin
specific time. shift
E541 Clock pulses from the shift motor are below a specific value.
E542 The lead cam of the lower bin unit cannot detect the home
position within a specific time.
E543 Clock pulses of the shift motor for the lower bin unit is out of the
specifications.
E545 Malfunction of bin flapper 1: Sorter-H1 for CP660
•The sensor cannot detect the operation of the flapper when the
flapper solenoid drive signal is generated.
•The sensor detects the operation of the flapper when the flapper
solenoid drive signal stops.
E546 Malfunction of bin flapper 2: Sorter-H1 for CP660
•The sensor cannot detect the operation of the flapper when the
flapper solenoid drive signal is generated.
•The sensor detects the operation of the flapper when the flapper
solenoid drive signal stops.
E550 An error in the output from the load system of the power supply Related
unit is detected. power
E551 A failure in or the stoppage of fans of Sorter/Finisher is detected: supply of
•Power supply fan, punch fan, etc. sorter/
finisher
E560 Clock pulses from the upper feeder motor are below a specific Related
value. feed2 of
E561 Clock pulses from the lower feed motor are below a specific value. sorter/finish
E562 Automatic adjustment of the folding unit feed path sensor 2 fails. er
E563 Automatic adjustment of the folding unit feed path sensor 3 fails.
E564 Automatic adjustment of the upper path external bin sensor fails.
E565 Automatic adjustment of the lower path external path sensor fails.
E570 The side gripper motor does not reach the stipulated position Related
within a specific time as it is in operation. stack
E571 The front gripper motor does not reach the stipulated position handling
within a specific time as it is in operation. unit
E572 The side gripper left/right shift motor does not reach the stipulated
position within a specific time as it is in operation.
E573 The front gripper left/right shift motor does not reach the stipulated
E574 The front gripper front/rear shift motor does not reach the
stipulated position within a specific time as it is in operation.
E575 The cable wiring unit up/down motor does not reach the stipulated
E576 Automatic adjustment of the edge feeding sensor fails.
E577 The paddle drive motor cannot detect the paddle home position
within a specific time as it is in operation.
E578 •The knurl belt motor does not detect the home position within a
specific time as it is in operation.
•The knurl belt motor does not leave the home position within a
specific time as it is in operation.
E580 The stack tray motor does not reach the stipulated position within Related
a specific time as it is in operation. stacker2
E581 The stack unit shift motor does not reach the stipulated position
within a specific time as it is in operation.
E582 The tray leading edge stopper motor does not reach the stipulated
E583 The sensor is not turned ON within a specific time as the tray
auxiliary plate motor is in operation.
E584 •The shutter sensor is not turned ON within a specific time as the
shutter drive motor is in operation.
•It is detected that the shutter detection switch is turned OFF as
the tray up-down motor is in operation.
E585 The shutter HP sensor is not turned ON within a specific time as
the paddle motor is in operation.
E590 •The punch motor does not detect the home position within a Related
specific time as the punch motor is in operation. punch unit
•The punch motor does not leave the home position within a
specific time as the punch motor is in operation.
E591 Automatic adjustment of the punch scrap sensor fails.
E592 Automatic adjustment of the punch trailing edge sensor fails.
E593 •The puncher cannot detect the home position as the side
registration motor is in operation.
•The puncher does not return to the home position as the side
registration motor is in operation.
E594 •The punch paper end HP sensor does not detect the home
position within a specific time as the punch sensor shift motor is in
operation.
•The punch paper end sensor does not return to the home
position within a specific time as the punch sensor shift motor is in
operation.
E595 Output of the punch waste delivery sensor does not change within Side Finisher-D1
a specific time as the punch waste delivery motor is in operation.
E5A0 Errors in the trimmer knife motor: a. The knife motor does not Related
leave the home position within a specific time after the normal trimmer
rotation drive starts. b. The knife motor does not return to the
home position within a specific time after the normal rotation drive
starts. c. In case of b, the knife motor does not return to the home
position after the reverse rotation drive starts.d. Rotation of the fan
motor accompanied by the knife motor is unstable.
E5A1 Errors in the trimmer holder motor:

a. When the trimmer holder motor goes down, it does not reach
the lower limit home position within a specific time after the holder
motor starts to be driven.
b. When the trimmer holder motor goes up, it does not reach the
upper limit home position within a specific time after the holder
E5A2 Errors in the trimmer pusher motor:
a. When a stack is pushed out, a stack does not reach to the
stipulated push-out position within a specific time after the pusher
b. When a stack is moved to the stand-by position, a stack does
not reach the stipulated stand-by position within a specific time
after the pusher motor starts to be driven.
E5A3 Errors in the trimmer trailing edge stopper motor:
a. The trailing edge stopper motor does not reach the home
position within a specific time after the motor starts to be driven.
b. The trailing edge stopper motor does not reach the stipulated
position within a specific time after the motor starts to be driven.
E5A4 Errors in the trimmer press motor:
a. The press motor does not reach the home position within a
specific time after the motor starts to be driven.
b. The press motor does not reach the press position within a
specific time after the motor starts to be driven.
E5A5 An error in the trimmer feed motor:
•A fixed speed is not obtained within a specific time after the feed
E5A6 Errors in the trimmer stopper trailing edge motor:
a. The motor does not reach the stopper functioning position
within a specific time after the stopper release motor starts to be
driven.
b. The motor does not reach the stopper releasing position within
a specific time after the stopper release motor starts to be driven.
E5A7 An error occurs in the communication between a trimmer and the
CPU of the finisher.
E5F0 •The paper positioning plate HP sensor is not turned ON within a Related
specific time while the positioning plate motor is being driven.•The saddle
paper positioning plate HP sensor is not turned OFF within a stitcher
specific time while the positioning plate is being driven.
E5F1 The detection pulse of the motor clock sensor for folding is below
a specific value.
E5F2 •The guide HP sensor is not turned ON within a specific time while
the guide motor is being driven.
•The guide HP sensor is not turned OFF within a specific time as
the guide motor is being driven.
E5F3 •The alignment plate HP sensor is not turned ON within a specific
time while the alignment motor is being driven.
•The alignment plate HP sensor is not turned OFF within a
specific time as the alignment motor is being driven.
E5F4 •The stitch operation HP sensor is not turned ON while the stitch
motor (rear) is being driven.
•The stitch operation HP sensor is not turned OFF while the stitch
motor (rear) is being driven.
E5F5 •The stitch operation HP sensor is not turned ON within a specific
time while the stitch motor (front) is being driven.
•The stitch operation HP sensor is not turned OFF within a
specific time while the stitch motor (front) is being driven.
E5F6 •The paper push plate HP sensor or the paper push plate leading
edge position sensor is not turned ON while the paper push plate
motor is being driven.
•The paper push plate HP sensor or the paper push plate leading
edge position sensor is not turned OFF while the paper push plate
motor is being driven.
•The number of detection pulses of the paper push plate motor
clock sensor is below a specific value.
E5F8 Coming off of a sensor connector in the side stitcher is detected:
•Guide HP sensor, paper push plate HP sensor, paper push plate
leading edge position sensor, etc.
E5F9 It is detected that a door switch (power supply system) of Saddle
Finisher is 'OPEN' while a copier is working.
•Inlet cover, front cover, delivery cover.
E600 A failure in RMU extension of an external unit. Related
E601 •An error occurs in the communication with an electric sorter. memory
•An error occurs in the communication with an image server. unit (digital
•An error occurs in the communication with a hard disk. APC)
E602 Hard disk failure.
E603 Blowout of the fuse on the bus line of the SCSI board.
E604 Failures in the image memory (including encoding memory):
•When writing/reading/verifying an image memory, a writing failure
is detected.
•RAM failure, a failure in mounting the expanded memory.
E605 A fault in the battery for image memory.
Although the battery is charged sufficiently and the power is ON
within its discharging time, the battery is below a specific voltage.
E607 Input to the clock signal is not made after a specific time passes
while the hard disk fan is being driven.
E608 A fault occurs in the operation controller CPU.
E620 1. An error occurs in the serial communication with the NP editor, Related
etc. editor
2. All errors occurring in the editor controller PCB are indicated on
a host machine.
E621 An error occurs in the communication between an editor and a
copier.
E624 An error occurs in the serial communication between the editor
controller PCB and the digitizer PCB.
E625 An error in RAM on the editor controller PCB.
E626 An error in the LCD controller circuit on the editor controller PCB
E627 An error in the gate array on the editor controller PCB.
E628 An error in the IC for communication on the editor controller PCB.
E629 An error in the main sequence on the editor controller PCB.
E630 The projector is not connected. (Blowout of the projector lamp, Related
insufficient light intensity, and a communication failure are projector
included.)
E631 A failure in adjustment of light intensity of the projector lamp. (This
is detected by a host copier).
E632 The home position signal for the projector is not input.
E633 An error occurs in the serial communication with the projector, etc.
E634 Disconnection of the projector lamp is detected.
E640 •An error occurs in the communication with the IPU. Related
•An internal error occurs in the IPU. IPU
•The type of an external device cannot be identified.
•An error occurs in the communication with the AHS (PCB for BJ-
A1).
E641 DOS program execution error (upon start-up).
E642 An error occurs in the communication between the image
processor PCB and the system unit PCB (upon start-up).
E643 Image memory PCB failure (upon start-up).
E644 Faults related to the interface PCB accommodated to a model
(upon start-up).
E645 Faults related to the SCSI interface PCB (upon start-up).
E646 Faults related to the LAN card (upon start-up).
E650 An error occurs in the communication with the film scanner. Related film
E651 The CCD is not exposed to light even if the mirror solenoid is ON. scanner
E652 The lens cannot detect the home position due to AF motor failure,
etc.
E653 Signals are not generated from the filter sensor within a specific
time.
E654 Scanner motor failure.
E655 Auto carrier failure.
E656 Although the carriage drive motor is being driven, the sensor does
not send out signals within a specific time.
E657 EEPROM backup data is damaged.
E660 A malfunction of IC card. (This is detected by a copier.) Related IC
card
E670 An error occurs in the communication between the multi device Related
controller PCB and a copier. multi device
E671 Abnormal temperature rise in the multi device controller unit. controller
E672 A failure in the HD (hard disk) in the multi device controller unit.
E673 A failure in the HD (hard disk) for FAX use in the multi device
controller unit.
E674 FAX PCB failure. Including FAX PCBs
other than the multi
device controller unit
E675 An error occurs in the initial communication between the IP and
the PRCON:
When a system power supply failure occurs, the PRCON is shut
down. In this case, interrupt signals keep being sent to the IP, and
consequently the IP gets locked up. -> If an error is found in
interrupt signals during the initial communication, the error code is
indicated.
E676 An error occurs in the initial communication between the PRCON
and the PS:
When the power supply is instantly shut off, the IP and the
PRCON are reset and start rebooting. Meanwhile, the PS is not
reset, and is left behind, resulting in no PS board. -> An initial
communication failure is detected upon starting up the PRCON,
and the error code is indicated if a failure is detected.
E677 An error occurs in the initial communication between an optional
controller and an accessory.
E678 A communication cut-out error between an optional roller and an
accessory.
E679 A communication protocol error between an optional controller
and an accessory.
E700 An error occurs in the serial communication. Related Related to the data
E701 Status parity failure. data line line between the
scanner ass'y and the
E702 Command illegal failure. printer ass'y.
E703 Command parity failure.
E704 Status busy failure.
E705 Print request failure.
E706 Print request failure:
•After finishing a copy operation, a copier does not go into the
stand-by state.
•After turning the power ON, a copier does not go into the stand-
by state.
E710 An error occurs in the communication IC of a copier upon turning Related A copier detects an
ON the power. data line error in the
E711 An error occurs in the communication IC of a copier after turning communication
ON the power. between a copier and
E712 An error occurs in the communication IC of the feeder/editor. an external device. An
external device does
E713 An error occurs in the communication IC of the sorter.
not have a display
E714 An error occurs in the communication IC of the IC card. function.
E715 An error occurs in the communication IC of the CFF.
E716 An error occurs in the communication IC of the Pedestal.
E717 •An error occurs in the communication IC of ASSIST.
•An error occurs in the communication between a copier and
ASSIST.
•ASSIST is dismounted without releasing it using Service Mode
(COPIER>OPTION>INT-FACE>B-CLR) after ASSIST is mounted.
E718 An error occurs in the communication IC of the film projector.
E719 An error occurs in the communication between a coin-operated
machine and a host copier.
E731 The controller board cannot identify the PDI board. Related iR3250
internal
E732 An error occurs in the communication between the controller iR3250
controller
board and the scanner.
E733 An error occurs in the communication between the controller
board and the printer.
E734 The controller board cannot identify the image processor PCB.
E735 The controller board cannot access the PCI bus of the image
processor PCB.
E736 An error occurs in the communication between the controller
board and the CCU board (FAX).
E737 When the controller board accesses the SRAM board, read and
write operations fail.
E738 While the controller board is ON, an error is detected when
initializing the network interface board.
E739 An error occurs in the communication (command) between the
controller board and the network interface board.
E740 An error is detected on the LAN card. Related
internal
E741 The controller board cannot access the PCI bus of the network
controller
interface board, or the PCI bus is found faulty.
E742 A fault in the RIP1 board is detected as the result of the self-
diagnosis.
E743 An error occurs in the communication between the main controller
PCB and the reader controller PCB (detected by the reader).
E744 The type of the boot ROM and that of the firmware are different.
E745 An error occurs in the token ring board.
E750 A ROM designed or a different model is inserted. iR2100
E800 The auto power off signal of the power supply switch is cut off. Related
E801 The auto power off signal of the power supply switch is generated. power
(No indication - This signal is for ASSIST use.) supply and
fan
E802 Power saving circuit failure (relay failure).
E803 •The DC low pressure output (5V, 24V, etc.) of the DC power
supply (including the composite power supply) is out of the control
value.
•The DC low pressure output (5V, 24V, etc.) is not detected.
E804 The stoppage of the cooling fan for the power supply unit is If the cooling fan
detected. stops, the temperature
of the power supply
unit might go up,
resulting in flaming or
smoking.
E805 The stoppage of the exhaust fan is detected, or a failure in The detail code can be
rotation of the fan is detected. (GP40 or later machines) checked with
DISPLAY.
E806 The stoppage of the exhaust fan motor around the ITD
(Intermediate Transfer Drum) is detected.
E807 The stoppage of the exhaust fan motor around the scanner is
detected.
E808 A fault in the fixing drive circuit or the power supply unit is
detected.
E809 The stoppage of the cooling fan of the reader unit power supply is
detected.
E810 The drum cartridge is found not mounted. Related
E811 Photosensitive drum unit memory failure. durable
E812 The home position of the ITD (Intermediate Transfer Drum) unit
cannot be detected.
E813 The fixing unit is found not mounted.
E814 A specific number of copies are made after warning to replace the
drum cartridge is indicated.
E820 A fault in the drum intake fan is detected. Related
E821 Abnormal temperature rise in the drum cleaner is detected. drum /
drive-2
E822 An error is detected in a fan associated with fixing/delivery.
E823 A fault in the pre-transfer corona assembly fan is detected.
E824 A fault in the primary corona assembly fan is detected.
E825 A fault in the CPU cooling fan is detected.
E826 A fault in the multi feeder tray fan is detected.
E827 A fault in the printer's controller power supply cooling fan is
detected.
E830 A fault in the separation fan is detected. Related
charging
E901 The PLL lock signal is not generated within a specific time after
the pedestal motor drive signal is generated.
E902 A malfunction of the jogging guide plate of the duplexing unit.
E903 The paper deck lifter does not lift up within a specific time.
E904 The waste toner box swing cam does not return to the home
position within a specific time.
E999 This error code is used only in case codes for self-diagnosis are
not determined while a device is under development. It is not used
after the mass production of the device is started.

Canon Engineers Handbook V21

Uploaded by

Copyright:

Available Formats

Canon Engineers Handbook V21

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Canon Engineers Handbook V21

Uploaded by

Copyright:

Available Formats

Engineer’s Pocket Guide

Engineers Pocket Guide V21 Created by TT&S CUK April 2019

Page 4 iR2016; iR2018; iR2520; iR1730

Page 5 iR2202; iR2270 – 3025 – 3225

Page 6 iR5570; iR5055

Page 7 iR7105; iR Advance 500

Page 8 iR Advance 715; iR Advance 4xxx; iR Advance 6xxx

Page 9 iR Advance 8xxx

Page 11 iRC 2880,3580

Page 12 iRC 4080; iRC 1325; iR Advance C250/255/356

Page 13 iR Advance C2xxx; iR Advance C33xx/35xx

Page 14 iR Advance C5xxx

Page 15 iR Advance C7xxx/9xxx

Page 16 imagePRESS C1; imagePRESS C600/ 650

Page 18 Document Feeders

Page 22 Error Codes

Engineers Pocket Guide V21 Created by TT&S CUK April 2019

Refer to Nuance RMA procedure for iR1435i/iF

iR7086/7095/7105 iR ADVANCE 400/500

iR ADVANCE C22XX/20XX iR ADVANCE C33XX/35XX

E431 1. The output of the paper sensor is faulty.

E5A1 Errors in the trimmer holder motor:

You might also like