Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    WIFI-2-M06USA1: WLAN 802.11b/g/n Module

    Uploaded by

    mben osbi
    This document describes a WIFI-2-M06USA1 WLAN 802.11b/g/n module. The module uses the MTK MT7601UN chip and supports IEEE 802.11b, 802.11g, and 802.11n wireless standards in the 2.4GHz band. It has a USB 2.0 interface and measures 12.3mm x 12.7mm x 1.95mm. The module provides wireless data rates up to 150Mbps and complies with FCC regulations for wireless devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WIFI-2-M06USA1: WLAN 802.11b/g/n Module

    Uploaded by

    mben osbi
    32 views4 pages
    This document describes a WIFI-2-M06USA1 WLAN 802.11b/g/n module. The module uses the MTK MT7601UN chip and supports IEEE 802.11b, 802.11g, and 802.11n wireless standards in the 2.4GHz band. It has a USB 2.0 interface and measures 12.3mm x 12.7mm x 1.95mm. The module provides wireless data rates up to 150Mbps and complies with FCC regulations for wireless devices.

    Original Title

    15-WIFI-2-M06USA1-UserMan-r1-3240249

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a WIFI-2-M06USA1 WLAN 802.11b/g/n module. The module uses the MTK MT7601UN chip and supports IEEE 802.11b, 802.11g, and 802.11n wireless standards in the 2.4GHz band. It has a USB 2.0 interface and measures 12.3mm x 12.7mm x 1.95mm. The module provides wireless data rates up to 150Mbps and complies with FCC regulations for wireless devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views4 pages

    WIFI-2-M06USA1: WLAN 802.11b/g/n Module

    Uploaded by

    mben osbi
    This document describes a WIFI-2-M06USA1 WLAN 802.11b/g/n module. The module uses the MTK MT7601UN chip and supports IEEE 802.11b, 802.11g, and 802.11n wireless standards in the 2.4GHz band. It has a USB 2.0 interface and measures 12.3mm x 12.7mm x 1.95mm. The module provides wireless data rates up to 150Mbps and complies with FCC regulations for wireless devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    WIFI-2-M06USA1

    WLAN 802.11b/g/n module

    特性 Features：
     接收制式 Reserving System
    IEEE Std. 802.11b
    IEEE Std. 802.11g
    IEEE Std. 802.11n
     芯片方案 Chip Solution
    MT7601UN
     波段 Band
    2.4G

    四川长虹电子部品有限公司
    Sichuan Changhong Electronic Component Co., Ltd.
    地址 Add : 四川省绵阳市安县花荄镇罗胜街
    Luosheng street,Huagai Zhen, Anxian, Mianyang, Sichuan, China
    传真 Fax : +86-0816-2410643
    网 址: http://www.changhong.com
    WIFI-2-M06USA1
    WLAN 802.11b/g/n module
    1. Introduction
    WIFI-2-M06U is based on MTK MT7601,complied with IEEE 802.11b/g/n standard from
    2.4-2.5GHz.This documentation describes the engineering requirements specification.
    1.1 RF module Overview
    The general HW architecture for the module is shown in Figure 1. This WLAN Module design is based
    on MTK MT7601. It is a highly integrated single-chip MIMO(Multiple In Multiple Out) Wireless LAN
    (WLAN) USB2.0 network interface controllercomplying with the 802.11n specification. It combines a
    MAC, a 1T1R capable baseband,and RF in a single chip. The MT7601 provides a complete solution for
    a highthroughput performance wireless client.

    Figure 1 WIFI-2-M06U Block Diagram


    1.2 Specification reference
    This specification is based on additional references listed below.
    _ IEEE Std. 802.11b
    _ IEEE Std. 802.11g
    _ IEEE Std. 802.11n
    1.3 System Functions
    Table1: General Specification as below:
    Main Chipset MTK MT7601UN
    Operating Frequency 2.412~2.472GHz
    WiFi Standard 802.11b/g/n(1x1)
    Modulation 11b: DBPSK, DQPSK and CCK and DSSS 11g: BPSK, QPSK,
    16QAM, 64QAM and OFDM 11n: MCS0~15 OFDM
    Data rates 11b:1, 2, 5.5 and 11Mbps 11g:6, 9, 12, 18, 24, 36, 48 and 54
    Mbps 11n: MCS0~15, up to 150Mbps
    Form factor 6pin
    Host Interface USB 2.0
    PCB Stack 4-layers design
    Typical，
    Dimension
    12.3mm(W)*12.7mm(L)*1.95mm(H)
    Operation Temperature 0℃ to +60℃
    Storage Temperature -15℃ to +45℃
    Operation Voltage 3.3V +/-10% （Ripple: ≤30mVp-p）
    Ratings 3.3V 500mA

    四川长虹电子部品有限公司
    Sichuan Changhong Electronic Component Co., LTD page 2 of 4
    WIFI-2-M06USA1
    WLAN 802.11b/g/n module
    2. Mechanical Specification
    Typical Dimension (W x L x T): 12.3mmx 12.7mm x 1.95mm (tolerance : +/-0.15 mm)
    PCB Thickness: 1.0mm

    3
    6
    4
    5

    Pin TYPE

    1 power3.3v

    2 UDN

    3 UDP

    4 GND

    5 GND

    6 ANT

    四川长虹电子部品有限公司
    Sichuan Changhong Electronic Component Co., LTD page 3 of 4
    WIFI-2-M06USA1
    WLAN 802.11b/g/n module

    This device complies with Part 15 of the FCC rules. Operation is subject to the
    following two conditions: 1) this device may not cause harmful interference, and 2)
    this device must accept any interference received, including interference that may
    cause undesired operation.
    Note: This equipment has been tested and found to comply with the limits for a Class
    B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
    provide reasonable protection against harmful interference in a residential installation.
    This equipment generates uses and can radiate radio frequency energy and, if not
    installed and used in accordance with the instructions, may cause harmful
    interference to radio communications. However, there is no guarantee that
    interference will not occur in particular installation. If this equipment does cause
    harmful interference to radio or television reception, which can be determined by
    turning the equipment off and on, the user is encouraged to try to correct the
    interference by one or more of the following measures:
    --Reorient or relocate the receiving antenna.
    --Increase the separation between the equipment and receiver.
    --Connect the equipment into an outlet on a circuit different from that to which the
    receiver is connected.
    --Consult the dealer or an experienced radio/TV technician for help.
    Changes or modifications not expressly approved by the party responsible for
    compliance could void the user’s authority to operate the equipment.
    FCC Radiation Exposure Statement
    This modular complies with FCC RF radiation exposure limits set forth for an
    uncontrolled environment. This transmitter must not be co-located or operating in
    conjunction with any other antenna or transmitter.

    Attention: Limited Modular Approval - this RF Module may not be sold to the generic public and
    requires professional installation. Due to the fact that this RF Module is not equipped with an
    own shielding, the end-product incl. this RF Module has to show compliance to the FCC rules
    (15C / radiated emissions).
    (OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF
    Module. Additional measurements (15C) and/or equipment authorizations
    (e.g either a complete new certification or a Class II Permissive Change) may need to be
    addressed depending on co-location or simultaneous transmission issues if applicable.
    Integrator is reminded to assure that these installation instructions will not be made available to
    the end-user of the final host device.
    The Integrator will be responsible to satisfy SAR/ RF Exposure requirements, when the module
    integrated into any (portable, mobile, fixed) host device.
    The final host device, into which this RF Module is integrated" has to be labeled with an auxiliary
    label stating the FCC ID of the RF Module, such as "Contains FCC ID: 2AC49-M06USA1".

    四川长虹电子部品有限公司
    Sichuan Changhong Electronic Component Co., LTD page 4 of 4

    You might also like