Control4 Square Wirless Adaptive Phase Dimmer

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Control4® Square Wireless Adaptive Phase Dimmer

Control4® Square Wireless Adaptive Phase Dimmer, 240V C4-SAPD240-N

The Control4® Square Wireless Adaptive Phase Dimmer combines elegant dimming with a configurable keypad for the ultimate in
lighting control. Unlock the power of one-touch automation simply by replacing an existing light switch with a Keypad Dimmer.

• Turns a standard light switch or dimmer into a fully customizable keypad and dimmer.
• Wireless communication and standard wiring provide easy installation in new construction and retrofit environments.
• Compatible with a variety of load types including LEDs, Incandescent, Halogen, Electronic Low Voltage (solid state)
Transformers, Magnetic (iron core) Low Voltage Transformers, Fluorescents, Compact Fluorescents.
• Supports both forward phase (leading edge) and reverse phase (trailing edge) dimming.
• Automatically detects load type and determines the appropriate dimming type.
• Protection circuitry prevents device damage in case of short circuit or excessive load.
• Continuously measures energy being used by the attached load.
• Configure with two to seven buttons using five different button sizes for a total of 38 possible configurations.
• Easy reconfiguration means there's no need to worry about how many buttons will be needed on a specific dimmer before (or even
after) installation.
• Elegant, sophisticated design makes a beautiful addition to any home or business.
• Custom engraving available to clearly identify each button.
• Backlit button engraving with programmable color control for easy readability regardless of time of day or light level.
• Programmable RGB LEDs provide status feedback for lighting and other devices in the system.
• Ambient light sensor automatically adjusts backlight and status LED brightness depending on the light level in the room.
• Ships as "Neutral" device with no buttons included. Keypad-style button kit and Rocker-style button kits sold separately in a variety
of colors (see "Available accessories").
• Control4® screw-less faceplates, sold separately, provide a sleek profile (see "Available accessories").
• Installs in standard square (UK/China-style) or round (EU-style) wall boxes. Round (EU-style) wall boxes require trim ring (see
"Available accessories").
Control4® Square Wireless Adaptive Phase Dimmer
Model number C4-SAPD240-xx

220VAC-240VAC +/-10%, 50/60 Hz


This device can function with or without a neutral AC connection
depending on load type. Wiring with a neutral is always the
Power requirements
preferred wiring method (if possible). See load types and “Sample
wiring configurations” below.
When wired without a neutral, loads may appear dimmer.

Power consumption 600mW

Load types and ratings

Incandescent, halogen, electronic (solid state) low-voltage (ELV)


transformer, magnetic (iron core, inductive) low-voltage (MLV)
Supported load types transformer1, phase-dimmable fluorescent, compact fluorescent, and
LED.
Important: Do not use with non-dimmable loads.

Maximum load

Reverse phase Forward phase

Incandescent (tungsten) 350W 250W

Halogen 350W 250W

Fluorescent 2 100W 100W

Compact fluorescent (CFL)2 100W N/A

LED2 100W 30W

Minimum load (with neutral)

All load types1,2 1W

Minimum load (without neutral)

Incandescent (tungsten) 7W
1 7W
Halogen

Fluorescent1,2 20W (see note 2 below)

Compact fluorescent (CFL)1,2 20W Varies (see note 2 below)

LED1,2 20W Varies (see note 2 below)

Important! When dimming magnetic (MLV) loads, each transformer must be loaded to at least 50% of its maximum load.
1

2
The minimum and maximum load requirements for fluorescent, CFL, and LED loads can vary greatly, depending
upon the specific fixture and/or bulb being used. The quality and performance of these load types varies greatly from
manufacturer to manufacturer. At higher wattages, in-rush current spikes may cause an overcurrent fault on the dimmer.
At low wattages, particularly when the dimmer is wired without a neutral, the light may not be able to completely turn
off, may flicker, or may cause the dimmer to power starve. Control4 strongly recommends bench testing the actual loads
being used in the exact wiring configuration that will be used before performing the installation.

Environmental

0˚C ~ 40˚C (32˚F ~ 104˚F)


Operational temperature All load ratings are based on an ambient
temperature of 25˚C (77˚F).

Humidity 5% to 95% non-condensing

Storage -20˚C ~ 70˚C (-4˚F ~ 158˚F)

Miscellaneous

Control communications ZigBee, IEEE 802.15.4, 2.4 GHz, 15-channel spread spectrum radio

One 0.5 mm2 - 2.5 mm2


Wires per connector OR
Two 0.5 mm2 - 1.5 mm2

Dimensions 83 × 71 × 33 mm (3.3 × 2.8 × 1.3 in.)

Depth in wall box 25.8 mm (1.0 in.)

Weight 0.06 kg (2.1 oz.)

Shipping weight 0.12 kg (4.2 oz.)


Control4® Square Wireless Adaptive Phase Dimmer
Available Accessories

Square Device Keypad Button Kit (C4-CKSK-xx) WH, SW, BL, MB, AU

Square Device Rocker Button Kit (C4-CKSR-xx) WH, SW, BL, MB, AU

Square Faceplate (C4-SFP1-xx) WG, BG, WH, LA, IV, BR, BL, SW, MB, BI, AU, SN, SS, VB, CH, MS
Glass 95 × 95 × 8.0 mm (3.7 × 3.7 × 0.3 in.)
Metal and plastic 85 × 85 × 7.5 mm (3.3 × 3.3 × 0.3 in.)

Square Dual Faceplate (C4-SFP2-xx) WH, BL, SW, MB, AU

Square Trim Ring (C4-SSTR-xx) WH, BL, SW, MB, AU

Square Dual Trim Ring (C4-SDTR-xx) WH, BL, SW, MB, AU

Engraved Button, Single High (C4-EBD1H-xx) WH, LA, IV, BR, BL, SW, MB, BI, AU

Engraved Button, Double High (C4-EBD2H-xx) WH, LA, IV, BR, BL, SW, MB, BI, AU

Engraved Button, Triple High (C4-EBD3H-xx) WH, LA, IV, BR, BL, SW, MB, BI, AU

Engraved Button, Rocker (C4-EBDR-xx) WH, LA, IV, BR, BL, SW, MB, BI, AU

Glass colors: WG=White, BG=Black


Gloss colors: WH=White, LA=Light Almond, IV=Ivory, BR=Brown, BL=Black
Satin colors: SW=Snow White, MB=Midnight Black, BI=Biscuit, AU=Aluminum
Metal finishes: SN=Satin Nickel, SS=Stainless Steel, VB=Venetian Bronze, CH=Chrome, MS=Matte Stainless

MOST RECENT VERSION

ctrl4.co/sqwirelessdim-ds

Copyright ©2017, Control4 Corporation. All rights reserved. Control4, the Control4 logo, the 4-ball logo, 4Store, DOC-00190-B
4Sight, Control4 My Home, and Mockupancy are registered trademarks or trademarks of Control4 Corporation 2017-08-15 LW
in the United States and/or other countries. All other names and brands may be claimed as the property of their
respective owners. All specifications subject to change without notice.
SQUARE WIRELESS ADAPTIVE PHASE DIMMER
SKU: C4-SAPD240-N

FRONT

70.8
2.79
TOP

56.8
2.24

82.9
3.26
210-01490
C4-SAPD240
220-240V~, 350W/250W
50/60 Hz

SIDE

25.7
BACK 1.01

22.6
.89

MODEL: C4-SAPD240
产品型号

SQUARE ADAPTIVE PHASE DIMMER


220-240V~, 50/60Hz, 350W/250W

69.2
Pat. http://www.control4.com/legal/patents

2.73
52.3
2.06

Made in China
中国制造

210-01427

©2016 Control4, Inc.

You might also like